diff options
Diffstat (limited to 'drivers/ata')
39 files changed, 233 insertions, 76 deletions
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 06f212ff2b4f..c16820325d7b 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -418,10 +418,12 @@ static const struct pci_device_id ahci_pci_tbl[] = { /* ATI */ { PCI_VDEVICE(ATI, 0x4380), board_ahci_sb600 }, /* ATI SB600 */ - { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700 IDE */ - { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700 AHCI */ - { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700 nraid5 */ - { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700 raid5 */ + { PCI_VDEVICE(ATI, 0x4390), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4391), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4392), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4393), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4394), board_ahci_sb600 }, /* ATI SB700/800 */ + { PCI_VDEVICE(ATI, 0x4395), board_ahci_sb600 }, /* ATI SB700/800 */ /* VIA */ { PCI_VDEVICE(VIA, 0x3349), board_ahci_vt8251 }, /* VIA VT8251 */ diff --git a/drivers/ata/ata_generic.c b/drivers/ata/ata_generic.c index 430fcf4f9ef3..945466954724 100644 --- a/drivers/ata/ata_generic.c +++ b/drivers/ata/ata_generic.c @@ -26,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "ata_generic" -#define DRV_VERSION "0.2.12" +#define DRV_VERSION "0.2.13" /* * A generic parallel ATA driver using libata diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 071d274afaab..6996eb5b7506 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -94,7 +94,7 @@ #include <linux/dmi.h> #define DRV_NAME "ata_piix" -#define DRV_VERSION "2.11" +#define DRV_VERSION "2.12" enum { PIIX_IOCFG = 0x54, /* IDE I/O configuration register */ @@ -130,6 +130,7 @@ enum { ich6m_sata_ahci = 8, ich8_sata_ahci = 9, piix_pata_mwdma = 10, /* PIIX3 MWDMA only */ + tolapai_sata_ahci = 11, /* constants for mapping table */ P0 = 0, /* port 0 */ @@ -253,6 +254,8 @@ static const struct pci_device_id piix_pci_tbl[] = { { 0x8086, 0x292d, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, /* SATA Controller IDE (ICH9M) */ { 0x8086, 0x292e, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich8_sata_ahci }, + /* SATA Controller IDE (Tolapai) */ + { 0x8086, 0x5028, PCI_ANY_ID, PCI_ANY_ID, 0, 0, tolapai_sata_ahci }, { } /* terminate list */ }; @@ -441,12 +444,25 @@ static const struct piix_map_db ich8_map_db = { }, }; +static const struct piix_map_db tolapai_map_db = { + .mask = 0x3, + .port_enable = 0x3, + .map = { + /* PM PS SM SS MAP */ + { P0, NA, P1, NA }, /* 00b */ + { RV, RV, RV, RV }, /* 01b */ + { RV, RV, RV, RV }, /* 10b */ + { RV, RV, RV, RV }, + }, +}; + static const struct piix_map_db *piix_map_db_table[] = { [ich5_sata] = &ich5_map_db, [ich6_sata] = &ich6_map_db, [ich6_sata_ahci] = &ich6_map_db, [ich6m_sata_ahci] = &ich6m_map_db, [ich8_sata_ahci] = &ich8_map_db, + [tolapai_sata_ahci] = &tolapai_map_db, }; static struct ata_port_info piix_port_info[] = { @@ -560,6 +576,17 @@ static struct ata_port_info piix_port_info[] = { .mwdma_mask = 0x06, /* mwdma1-2 ?? CHECK 0 should be ok but slow */ .port_ops = &piix_pata_ops, }, + + /* tolapai_sata_ahci: 11: */ + { + .sht = &piix_sht, + .flags = PIIX_SATA_FLAGS | PIIX_FLAG_SCR | + PIIX_FLAG_AHCI, + .pio_mask = 0x1f, /* pio0-4 */ + .mwdma_mask = 0x07, /* mwdma0-2 */ + .udma_mask = ATA_UDMA6, + .port_ops = &piix_sata_ops, + }, }; static struct pci_bits piix_enable_bits[] = { @@ -894,6 +921,13 @@ static int piix_broken_suspend(void) { static struct dmi_system_id sysids[] = { { + .ident = "TECRA M3", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA M3"), + }, + }, + { .ident = "TECRA M5", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), @@ -908,6 +942,13 @@ static int piix_broken_suspend(void) }, }, { + .ident = "Satellite U200", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "Satellite U200"), + }, + }, + { .ident = "Satellite U205", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), @@ -921,7 +962,8 @@ static int piix_broken_suspend(void) DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE M500"), }, }, - { } + + { } /* terminate list */ }; static const char *oemstrs[] = { "Tecra M3,", @@ -1139,6 +1181,41 @@ static void __devinit piix_init_sata_map(struct pci_dev *pdev, hpriv->map = map; } +static void piix_iocfg_bit18_quirk(struct pci_dev *pdev) +{ + static struct dmi_system_id sysids[] = { + { + /* Clevo M570U sets IOCFG bit 18 if the cdrom + * isn't used to boot the system which + * disables the channel. + */ + .ident = "M570U", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Clevo Co."), + DMI_MATCH(DMI_PRODUCT_NAME, "M570U"), + }, + }, + + { } /* terminate list */ + }; + u32 iocfg; + + if (!dmi_check_system(sysids)) + return; + + /* The datasheet says that bit 18 is NOOP but certain systems + * seem to use it to disable a channel. Clear the bit on the + * affected systems. + */ + pci_read_config_dword(pdev, PIIX_IOCFG, &iocfg); + if (iocfg & (1 << 18)) { + dev_printk(KERN_INFO, &pdev->dev, + "applying IOCFG bit18 quirk\n"); + iocfg &= ~(1 << 18); + pci_write_config_dword(pdev, PIIX_IOCFG, iocfg); + } +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -1200,6 +1277,9 @@ static int piix_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) piix_map_db_table[ent->driver_data]); } + /* apply IOCFG bit18 quirk */ + piix_iocfg_bit18_quirk(pdev); + /* On ICH5, some BIOSen disable the interrupt using the * PCI_COMMAND_INTX_DISABLE bit added in PCI 2.3. * On ICH6, this bit has the same effect, but only when diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c index 99d4fbffb0df..772be09b4689 100644 --- a/drivers/ata/libata-core.c +++ b/drivers/ata/libata-core.c @@ -1911,8 +1911,9 @@ int ata_dev_configure(struct ata_device *dev) dev->flags |= ATA_DFLAG_FLUSH_EXT; } - if (ata_id_hpa_enabled(dev->id)) - dev->n_sectors = ata_hpa_resize(dev); + if (!(dev->horkage & ATA_HORKAGE_BROKEN_HPA) && + ata_id_hpa_enabled(dev->id)) + dev->n_sectors = ata_hpa_resize(dev); /* config NCQ */ ata_dev_config_ncq(dev, ncq_desc, sizeof(ncq_desc)); @@ -3700,11 +3701,16 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int readid_flags) goto fail; /* verify n_sectors hasn't changed */ - if (dev->class == ATA_DEV_ATA && dev->n_sectors != n_sectors) { + if (dev->class == ATA_DEV_ATA && n_sectors && + dev->n_sectors != n_sectors) { ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch " "%llu != %llu\n", (unsigned long long)n_sectors, (unsigned long long)dev->n_sectors); + + /* restore original n_sectors */ + dev->n_sectors = n_sectors; + rc = -ENODEV; goto fail; } @@ -3772,6 +3778,9 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "Maxtor 6L250S0", "BANC1G10", ATA_HORKAGE_NONCQ }, { "Maxtor 6B200M0", "BANC1BM0", ATA_HORKAGE_NONCQ }, { "Maxtor 6B200M0", "BANC1B10", ATA_HORKAGE_NONCQ }, + { "Maxtor 7B250S0", "BANC1B70", ATA_HORKAGE_NONCQ, }, + { "Maxtor 7B300S0", "BANC1B70", ATA_HORKAGE_NONCQ }, + { "Maxtor 7V300F0", "VA111630", ATA_HORKAGE_NONCQ }, { "HITACHI HDS7250SASUN500G 0621KTAWSD", "K2AOAJ0AHITACHI", ATA_HORKAGE_NONCQ }, /* NCQ hard hangs device under heavier load, needs hard power cycle */ @@ -3788,9 +3797,14 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = { { "WDC WD740ADFD-00NLR1", NULL, ATA_HORKAGE_NONCQ, }, { "FUJITSU MHV2080BH", "00840028", ATA_HORKAGE_NONCQ, }, { "ST9160821AS", "3.CLF", ATA_HORKAGE_NONCQ, }, + { "ST3160812AS", "3.AD", ATA_HORKAGE_NONCQ, }, { "SAMSUNG HD401LJ", "ZZ100-15", ATA_HORKAGE_NONCQ, }, - /* Devices with NCQ limits */ + /* devices which puke on READ_NATIVE_MAX */ + { "HDS724040KLSA80", "KFAOA20N", ATA_HORKAGE_BROKEN_HPA, }, + { "WDC WD3200JD-00KLB0", "WD-WCAMR1130137", ATA_HORKAGE_BROKEN_HPA }, + { "WDC WD2500JD-00HBB0", "WD-WMAL71490727", ATA_HORKAGE_BROKEN_HPA }, + { "MAXTOR 6L080L4", "A93.0500", ATA_HORKAGE_BROKEN_HPA }, /* End Marker */ { } @@ -3980,6 +3994,11 @@ static unsigned int ata_dev_init_params(struct ata_device *dev, tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0); + /* A clean abort indicates an original or just out of spec drive + and we should continue as we issue the setup based on the + drive reported working geometry */ + if (err_mask == AC_ERR_DEV && (tf.feature & ATA_ABORTED)) + err_mask = 0; DPRINTK("EXIT, err_mask=%x\n", err_mask); return err_mask; @@ -6020,6 +6039,7 @@ void ata_dev_init(struct ata_device *dev) */ spin_lock_irqsave(ap->lock, flags); dev->flags &= ~ATA_DFLAG_INIT_MASK; + dev->horkage = 0; spin_unlock_irqrestore(ap->lock, flags); memset((void *)dev + ATA_DEVICE_CLEAR_OFFSET, 0, diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 1cce2198baaf..8023167bbbeb 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -297,7 +297,7 @@ void ata_bmdma_start (struct ata_queued_cmd *qc) dmactl = ioread8(ap->ioaddr.bmdma_addr + ATA_DMA_CMD); iowrite8(dmactl | ATA_DMA_START, ap->ioaddr.bmdma_addr + ATA_DMA_CMD); - /* Strictly, one may wish to issue a readb() here, to + /* Strictly, one may wish to issue an ioread8() here, to * flush the mmio write. However, control also passes * to the hardware at this point, and it will interrupt * us when we are to resume control. So, in effect, @@ -307,6 +307,9 @@ void ata_bmdma_start (struct ata_queued_cmd *qc) * is expected, so I think it is best to not add a readb() * without first all the MMIO ATA cards/mobos. * Or maybe I'm just being paranoid. + * + * FIXME: The posting of this write means I/O starts are + * unneccessarily delayed for MMIO */ } diff --git a/drivers/ata/pata_ali.c b/drivers/ata/pata_ali.c index e8a28e94fe47..71bdc3b3189c 100644 --- a/drivers/ata/pata_ali.c +++ b/drivers/ata/pata_ali.c @@ -34,7 +34,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_ali" -#define DRV_VERSION "0.7.4" +#define DRV_VERSION "0.7.5" /* * Cable special cases @@ -48,6 +48,13 @@ static struct dmi_system_id cable_dmi_table[] = { DMI_MATCH(DMI_BOARD_VERSION, "OmniBook N32N-736"), }, }, + { + .ident = "Toshiba Satelite S1800-814", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "S1800-814"), + }, + }, { } }; diff --git a/drivers/ata/pata_amd.c b/drivers/ata/pata_amd.c index b09facad63e1..04048fcf6305 100644 --- a/drivers/ata/pata_amd.c +++ b/drivers/ata/pata_amd.c @@ -25,7 +25,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_amd" -#define DRV_VERSION "0.3.8" +#define DRV_VERSION "0.3.9" /** * timing_setup - shared timing computation and load diff --git a/drivers/ata/pata_atiixp.c b/drivers/ata/pata_atiixp.c index 80509be49e7a..86f85a2cab7e 100644 --- a/drivers/ata/pata_atiixp.c +++ b/drivers/ata/pata_atiixp.c @@ -22,7 +22,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_atiixp" -#define DRV_VERSION "0.4.5" +#define DRV_VERSION "0.4.6" enum { ATIIXP_IDE_PIO_TIMING = 0x40, diff --git a/drivers/ata/pata_cs5520.c b/drivers/ata/pata_cs5520.c index 7dc76e71bd55..e2459088cdcd 100644 --- a/drivers/ata/pata_cs5520.c +++ b/drivers/ata/pata_cs5520.c @@ -41,7 +41,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_cs5520" -#define DRV_VERSION "0.6.5" +#define DRV_VERSION "0.6.6" struct pio_clocks { diff --git a/drivers/ata/pata_cs5530.c b/drivers/ata/pata_cs5530.c index 68f150a1e2f4..c6066aa43ec8 100644 --- a/drivers/ata/pata_cs5530.c +++ b/drivers/ata/pata_cs5530.c @@ -35,7 +35,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_cs5530" -#define DRV_VERSION "0.7.3" +#define DRV_VERSION "0.7.4" static void __iomem *cs5530_port_base(struct ata_port *ap) { diff --git a/drivers/ata/pata_isapnp.c b/drivers/ata/pata_isapnp.c index 91a396fa5b20..9e553c54203a 100644 --- a/drivers/ata/pata_isapnp.c +++ b/drivers/ata/pata_isapnp.c @@ -17,7 +17,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_isapnp" -#define DRV_VERSION "0.2.1" +#define DRV_VERSION "0.2.2" static struct scsi_host_template isapnp_sht = { .module = THIS_MODULE, diff --git a/drivers/ata/pata_it821x.c b/drivers/ata/pata_it821x.c index 430673be1df7..5d8b91e70ecd 100644 --- a/drivers/ata/pata_it821x.c +++ b/drivers/ata/pata_it821x.c @@ -80,7 +80,7 @@ #define DRV_NAME "pata_it821x" -#define DRV_VERSION "0.3.7" +#define DRV_VERSION "0.3.8" struct it821x_dev { @@ -533,6 +533,10 @@ static int it821x_check_atapi_dma(struct ata_queued_cmd *qc) struct ata_port *ap = qc->ap; struct it821x_dev *itdev = ap->private_data; + /* Only use dma for transfers to/from the media. */ + if (qc->nbytes < 2048) + return -EOPNOTSUPP; + /* No ATAPI DMA in smart mode */ if (itdev->smart) return -EOPNOTSUPP; @@ -587,7 +591,7 @@ static int it821x_port_start(struct ata_port *ap) itdev->want[1][1] = ATA_ANY; itdev->last_device = -1; - if (pdev->revision == 0x11) { + if (pdev->revision == 0x10) { itdev->timing10 = 1; /* Need to disable ATAPI DMA for this case */ if (!itdev->smart) diff --git a/drivers/ata/pata_ixp4xx_cf.c b/drivers/ata/pata_ixp4xx_cf.c index 4ca7fd6118d5..5dea3584c6c2 100644 --- a/drivers/ata/pata_ixp4xx_cf.c +++ b/drivers/ata/pata_ixp4xx_cf.c @@ -189,6 +189,9 @@ static __devinit int ixp4xx_pata_probe(struct platform_device *pdev) data->cs0 = devm_ioremap(&pdev->dev, cs0->start, 0x1000); data->cs1 = devm_ioremap(&pdev->dev, cs1->start, 0x1000); + if (!data->cs0 || !data->cs1) + return -ENOMEM; + irq = platform_get_irq(pdev, 0); if (irq) set_irq_type(irq, IRQT_RISING); diff --git a/drivers/ata/pata_marvell.c b/drivers/ata/pata_marvell.c index 87594c04d3a3..b45506f1ef73 100644 --- a/drivers/ata/pata_marvell.c +++ b/drivers/ata/pata_marvell.c @@ -44,10 +44,10 @@ static int marvell_pre_reset(struct ata_port *ap, unsigned long deadline) return -ENOMEM; printk("BAR5:"); for(i = 0; i <= 0x0F; i++) - printk("%02X:%02X ", i, readb(barp + i)); + printk("%02X:%02X ", i, ioread8(barp + i)); printk("\n"); - devices = readl(barp + 0x0C); + devices = ioread32(barp + 0x0C); pci_iounmap(pdev, barp); if ((pdev->device == 0x6145) && (ap->port_no == 0) && @@ -192,6 +192,8 @@ static int marvell_init_one (struct pci_dev *pdev, const struct pci_device_id *i static const struct pci_device_id marvell_pci_tbl[] = { { PCI_DEVICE(0x11AB, 0x6101), }, + { PCI_DEVICE(0x11AB, 0x6121), }, + { PCI_DEVICE(0x11AB, 0x6123), }, { PCI_DEVICE(0x11AB, 0x6145), }, { } /* terminate list */ }; diff --git a/drivers/ata/pata_mpc52xx.c b/drivers/ata/pata_mpc52xx.c index 182e83c9047b..099f4cdc4cd9 100644 --- a/drivers/ata/pata_mpc52xx.c +++ b/drivers/ata/pata_mpc52xx.c @@ -24,7 +24,7 @@ #define DRV_NAME "mpc52xx_ata" -#define DRV_VERSION "0.1.0ac2" +#define DRV_VERSION "0.1.2" /* Private structures used by the driver */ diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c index 6da23feed039..0f2b027624d6 100644 --- a/drivers/ata/pata_pcmcia.c +++ b/drivers/ata/pata_pcmcia.c @@ -42,7 +42,7 @@ #define DRV_NAME "pata_pcmcia" -#define DRV_VERSION "0.3.1" +#define DRV_VERSION "0.3.2" /* * Private data structure to glue stuff together diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c index 69a5aa4949f5..bb64a986e8f5 100644 --- a/drivers/ata/pata_pdc2027x.c +++ b/drivers/ata/pata_pdc2027x.c @@ -35,7 +35,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_pdc2027x" -#define DRV_VERSION "0.9" +#define DRV_VERSION "1.0" #undef PDC_DEBUG #ifdef PDC_DEBUG @@ -563,13 +563,13 @@ static long pdc_read_counter(struct ata_host *host) u32 bccrl, bccrh, bccrlv, bccrhv; retry: - bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff; - bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + bccrl = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrh = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; rmb(); /* Read the counter values again for verification */ - bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0xffff; - bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0xffff; + bccrlv = readl(mmio_base + PDC_BYTE_COUNT) & 0x7fff; + bccrhv = readl(mmio_base + PDC_BYTE_COUNT + 0x100) & 0x7fff; rmb(); counter = (bccrh << 15) | bccrl; @@ -692,16 +692,16 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) struct timeval start_time, end_time; long pll_clock, usec_elapsed; - /* Read current counter value */ - start_count = pdc_read_counter(host); - do_gettimeofday(&start_time); - /* Start the test mode */ scr = readl(mmio_base + PDC_SYS_CTL); PDPRINTK("scr[%X]\n", scr); writel(scr | (0x01 << 14), mmio_base + PDC_SYS_CTL); readl(mmio_base + PDC_SYS_CTL); /* flush */ + /* Read current counter value */ + start_count = pdc_read_counter(host); + do_gettimeofday(&start_time); + /* Let the counter run for 100 ms. */ mdelay(100); @@ -719,7 +719,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host) usec_elapsed = (end_time.tv_sec - start_time.tv_sec) * 1000000 + (end_time.tv_usec - start_time.tv_usec); - pll_clock = (start_count - end_count) / 100 * + pll_clock = ((start_count - end_count) & 0x3fffffff) / 100 * (100000000 / usec_elapsed); PDPRINTK("start[%ld] end[%ld] \n", start_count, end_count); diff --git a/drivers/ata/pata_platform.c b/drivers/ata/pata_platform.c index a909f793ffc1..5086d03f2d7c 100644 --- a/drivers/ata/pata_platform.c +++ b/drivers/ata/pata_platform.c @@ -22,7 +22,7 @@ #include <linux/pata_platform.h> #define DRV_NAME "pata_platform" -#define DRV_VERSION "1.0" +#define DRV_VERSION "1.1" static int pio_mask = 1; diff --git a/drivers/ata/pata_sc1200.c b/drivers/ata/pata_sc1200.c index b8b2d11e4180..5edf67b1f3bf 100644 --- a/drivers/ata/pata_sc1200.c +++ b/drivers/ata/pata_sc1200.c @@ -40,7 +40,7 @@ #include <linux/libata.h> #define DRV_NAME "sc1200" -#define DRV_VERSION "0.2.5" +#define DRV_VERSION "0.2.6" #define SC1200_REV_A 0x00 #define SC1200_REV_B1 0x01 diff --git a/drivers/ata/pata_scc.c b/drivers/ata/pata_scc.c index 36cdbd2b0bd5..2d048ef25a5a 100644 --- a/drivers/ata/pata_scc.c +++ b/drivers/ata/pata_scc.c @@ -43,7 +43,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_scc" -#define DRV_VERSION "0.2" +#define DRV_VERSION "0.3" #define PCI_DEVICE_ID_TOSHIBA_SCC_ATA 0x01b4 diff --git a/drivers/ata/pata_serverworks.c b/drivers/ata/pata_serverworks.c index 89691541fe59..0faf99c8f13e 100644 --- a/drivers/ata/pata_serverworks.c +++ b/drivers/ata/pata_serverworks.c @@ -41,7 +41,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_serverworks" -#define DRV_VERSION "0.4.1" +#define DRV_VERSION "0.4.2" #define SVWKS_CSB5_REVISION_NEW 0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */ #define SVWKS_CSB6_REVISION 0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */ diff --git a/drivers/ata/pata_sil680.c b/drivers/ata/pata_sil680.c index b0cd52d6e3fb..40395804a66f 100644 --- a/drivers/ata/pata_sil680.c +++ b/drivers/ata/pata_sil680.c @@ -33,7 +33,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_sil680" -#define DRV_VERSION "0.4.6" +#define DRV_VERSION "0.4.7" #define SIL680_MMIO_BAR 5 diff --git a/drivers/ata/pata_sis.c b/drivers/ata/pata_sis.c index 66bd0e83ac07..cce2834b2b60 100644 --- a/drivers/ata/pata_sis.c +++ b/drivers/ata/pata_sis.c @@ -54,6 +54,7 @@ struct sis_laptop { static const struct sis_laptop sis_laptop[] = { /* devid, subvendor, subdev */ { 0x5513, 0x1043, 0x1107 }, /* ASUS A6K */ + { 0x5513, 0x1734, 0x105F }, /* FSC Amilo A1630 */ /* end marker */ { 0, } }; @@ -374,8 +375,9 @@ static void sis_66_set_dmamode (struct ata_port *ap, struct ata_device *adev) int drive_pci = sis_old_port_base(adev); u16 timing; + /* MWDMA 0-2 and UDMA 0-5 */ const u16 mwdma_bits[] = { 0x008, 0x302, 0x301 }; - const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000}; + const u16 udma_bits[] = { 0xF000, 0xD000, 0xB000, 0xA000, 0x9000, 0x8000 }; pci_read_config_word(pdev, drive_pci, &timing); diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 8c2813aa6cdb..c0f43bb25956 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -26,7 +26,7 @@ #include <linux/libata.h> #define DRV_NAME "pata_sl82c105" -#define DRV_VERSION "0.3.1" +#define DRV_VERSION "0.3.2" enum { /* diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index f645fe22cd1e..636c4f1a0b24 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -63,7 +63,7 @@ #include <linux/dmi.h> #define DRV_NAME "pata_via" -#define DRV_VERSION "0.3.1" +#define DRV_VERSION "0.3.2" /* * The following comes directly from Vojtech Pavlik's ide/pci/via82cxxx @@ -97,6 +97,7 @@ static const struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, @@ -144,6 +145,9 @@ static int via_cable_override(struct pci_dev *pdev) /* Systems by DMI */ if (dmi_check_system(cable_dmi_table)) return 1; + /* Arima W730-K8/Targa Visionary 811/... */ + if (pdev->subsystem_vendor == 0x161F && pdev->subsystem_device == 0x2032) + return 1; return 0; } @@ -240,7 +244,6 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo int ut; int offset = 3 - (2*ap->port_no) - adev->devno; - /* Calculate the timing values we require */ ata_timing_compute(adev, mode, &t, T, UT); @@ -287,9 +290,17 @@ static void via_do_set_mode(struct ata_port *ap, struct ata_device *adev, int mo ut = t.udma ? (0xe0 | (FIT(t.udma, 2, 9) - 2)) : 0x07; break; } + /* Set UDMA unless device is not UDMA capable */ - if (udma_type) - pci_write_config_byte(pdev, 0x50 + offset, ut); + if (udma_type) { + u8 cable80_status; + + /* Get 80-wire cable detection bit */ + pci_read_config_byte(pdev, 0x50 + offset, &cable80_status); + cable80_status &= 0x10; + + pci_write_config_byte(pdev, 0x50 + offset, ut | cable80_status); + } } static void via_set_piomode(struct ata_port *ap, struct ata_device *adev) diff --git a/drivers/ata/pdc_adma.c b/drivers/ata/pdc_adma.c index bec1de594de8..5c79271401af 100644 --- a/drivers/ata/pdc_adma.c +++ b/drivers/ata/pdc_adma.c @@ -44,7 +44,7 @@ #include <linux/libata.h> #define DRV_NAME "pdc_adma" -#define DRV_VERSION "0.06" +#define DRV_VERSION "1.0" /* macro to calculate base address for ATA regs */ #define ADMA_ATA_REGS(base,port_no) ((base) + ((port_no) * 0x40)) diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c index a9c948d7604a..fdbed8ecdfc2 100644 --- a/drivers/ata/sata_inic162x.c +++ b/drivers/ata/sata_inic162x.c @@ -28,7 +28,7 @@ #include <scsi/scsi_device.h> #define DRV_NAME "sata_inic162x" -#define DRV_VERSION "0.2" +#define DRV_VERSION "0.3" enum { MMIO_BAR = 5, diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 3acf65e75eb2..cb7dec97fee6 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -72,7 +72,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "0.81" +#define DRV_VERSION "1.0" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -313,7 +313,10 @@ enum { #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) enum { - MV_DMA_BOUNDARY = 0xffffffffU, + /* DMA boundary 0xffff is required by the s/g splitting + * we need on /length/ in mv_fill-sg(). + */ + MV_DMA_BOUNDARY = 0xffffU, /* mask of register bits containing lower 32 bits * of EDMA request queue DMA address @@ -448,7 +451,7 @@ static struct scsi_host_template mv5_sht = { .queuecommand = ata_scsi_queuecmd, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_MAX_SG_CT, + .sg_tablesize = MV_MAX_SG_CT / 2, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = 1, @@ -466,7 +469,7 @@ static struct scsi_host_template mv6_sht = { .queuecommand = ata_scsi_queuecmd, .can_queue = ATA_DEF_QUEUE, .this_id = ATA_SHT_THIS_ID, - .sg_tablesize = MV_MAX_SG_CT, + .sg_tablesize = MV_MAX_SG_CT / 2, .cmd_per_lun = ATA_SHT_CMD_PER_LUN, .emulated = ATA_SHT_EMULATED, .use_clustering = 1, @@ -1139,15 +1142,27 @@ static unsigned int mv_fill_sg(struct ata_queued_cmd *qc) dma_addr_t addr = sg_dma_address(sg); u32 sg_len = sg_dma_len(sg); - mv_sg->addr = cpu_to_le32(addr & 0xffffffff); - mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); - mv_sg->flags_size = cpu_to_le32(sg_len & 0xffff); + while (sg_len) { + u32 offset = addr & 0xffff; + u32 len = sg_len; + + if ((offset + sg_len > 0x10000)) + len = 0x10000 - offset; + + mv_sg->addr = cpu_to_le32(addr & 0xffffffff); + mv_sg->addr_hi = cpu_to_le32((addr >> 16) >> 16); + mv_sg->flags_size = cpu_to_le32(len); - if (ata_sg_is_last(sg, qc)) - mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + sg_len -= len; + addr += len; + + if (!sg_len && ata_sg_is_last(sg, qc)) + mv_sg->flags_size |= cpu_to_le32(EPRD_FLAG_END_OF_TBL); + + mv_sg++; + n_sg++; + } - mv_sg++; - n_sg++; } return n_sg; diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 0b58c4df6fd2..40dc73139858 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -49,7 +49,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_nv" -#define DRV_VERSION "3.4" +#define DRV_VERSION "3.5" #define NV_ADMA_DMA_BOUNDARY 0xffffffffUL diff --git a/drivers/ata/sata_promise.c b/drivers/ata/sata_promise.c index d39ebc23c4a9..25698cf0dce0 100644 --- a/drivers/ata/sata_promise.c +++ b/drivers/ata/sata_promise.c @@ -45,7 +45,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_promise" -#define DRV_VERSION "2.09" +#define DRV_VERSION "2.10" enum { PDC_MAX_PORTS = 4, @@ -328,8 +328,8 @@ static const struct pci_device_id pdc_ata_pci_tbl[] = { { PCI_VDEVICE(PROMISE, 0x3318), board_20319 }, { PCI_VDEVICE(PROMISE, 0x3319), board_20319 }, - { PCI_VDEVICE(PROMISE, 0x3515), board_20319 }, - { PCI_VDEVICE(PROMISE, 0x3519), board_20319 }, + { PCI_VDEVICE(PROMISE, 0x3515), board_40518 }, + { PCI_VDEVICE(PROMISE, 0x3519), board_40518 }, { PCI_VDEVICE(PROMISE, 0x3d17), board_40518 }, { PCI_VDEVICE(PROMISE, 0x3d18), board_40518 }, diff --git a/drivers/ata/sata_qstor.c b/drivers/ata/sata_qstor.c index c8f9242e7f44..5e1dfdda698f 100644 --- a/drivers/ata/sata_qstor.c +++ b/drivers/ata/sata_qstor.c @@ -39,7 +39,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_qstor" -#define DRV_VERSION "0.08" +#define DRV_VERSION "0.09" enum { QS_MMIO_BAR = 4, diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index db6763758952..8c72e714b456 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_sil" -#define DRV_VERSION "2.2" +#define DRV_VERSION "2.3" enum { SIL_MMIO_BAR = 5, diff --git a/drivers/ata/sata_sil24.c b/drivers/ata/sata_sil24.c index 46fbbe7f121c..233e88693395 100644 --- a/drivers/ata/sata_sil24.c +++ b/drivers/ata/sata_sil24.c @@ -30,7 +30,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_sil24" -#define DRV_VERSION "0.9" +#define DRV_VERSION "1.0" /* * Port request block (PRB) 32 bytes @@ -888,6 +888,16 @@ static inline void sil24_host_intr(struct ata_port *ap) u32 slot_stat, qc_active; int rc; + /* If PCIX_IRQ_WOC, there's an inherent race window between + * clearing IRQ pending status and reading PORT_SLOT_STAT + * which may cause spurious interrupts afterwards. This is + * unavoidable and much better than losing interrupts which + * happens if IRQ pending is cleared after reading + * PORT_SLOT_STAT. + */ + if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) + writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); + slot_stat = readl(port + PORT_SLOT_STAT); if (unlikely(slot_stat & HOST_SSTAT_ATTN)) { @@ -895,9 +905,6 @@ static inline void sil24_host_intr(struct ata_port *ap) return; } - if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) - writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT); - qc_active = slot_stat & ~HOST_SSTAT_ATTN; rc = ata_qc_complete_multiple(ap, qc_active, sil24_finish_qc); if (rc > 0) @@ -910,7 +917,8 @@ static inline void sil24_host_intr(struct ata_port *ap) return; } - if (ata_ratelimit()) + /* spurious interrupts are expected if PCIX_IRQ_WOC */ + if (!(ap->flags & SIL24_FLAG_PCIX_IRQ_WOC) && ata_ratelimit()) ata_port_printk(ap, KERN_INFO, "spurious interrupt " "(slot_stat 0x%x active_tag %d sactive 0x%x)\n", slot_stat, ap->active_tag, ap->sactive); diff --git a/drivers/ata/sata_sis.c b/drivers/ata/sata_sis.c index 31a2f55aae66..41c1d6e8f1fe 100644 --- a/drivers/ata/sata_sis.c +++ b/drivers/ata/sata_sis.c @@ -43,7 +43,7 @@ #include "sis.h" #define DRV_NAME "sata_sis" -#define DRV_VERSION "0.8" +#define DRV_VERSION "1.0" enum { sis_180 = 0, diff --git a/drivers/ata/sata_svw.c b/drivers/ata/sata_svw.c index 92e877075037..d9678e7bc3a9 100644 --- a/drivers/ata/sata_svw.c +++ b/drivers/ata/sata_svw.c @@ -53,7 +53,7 @@ #endif /* CONFIG_PPC_OF */ #define DRV_NAME "sata_svw" -#define DRV_VERSION "2.2" +#define DRV_VERSION "2.3" enum { /* ap->flags bits */ diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c index 5193bd8647ba..97aefdd87be4 100644 --- a/drivers/ata/sata_sx4.c +++ b/drivers/ata/sata_sx4.c @@ -92,7 +92,7 @@ #include "sata_promise.h" #define DRV_NAME "sata_sx4" -#define DRV_VERSION "0.11" +#define DRV_VERSION "0.12" enum { diff --git a/drivers/ata/sata_uli.c b/drivers/ata/sata_uli.c index 78c28512f01c..e6b8b45279af 100644 --- a/drivers/ata/sata_uli.c +++ b/drivers/ata/sata_uli.c @@ -36,7 +36,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_uli" -#define DRV_VERSION "1.2" +#define DRV_VERSION "1.3" enum { uli_5289 = 0, diff --git a/drivers/ata/sata_via.c b/drivers/ata/sata_via.c index 86b7bfc17324..57fd30de8f0d 100644 --- a/drivers/ata/sata_via.c +++ b/drivers/ata/sata_via.c @@ -46,7 +46,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_via" -#define DRV_VERSION "2.2" +#define DRV_VERSION "2.3" enum board_ids_enum { vt6420, @@ -371,7 +371,7 @@ static void vt6421_set_dma_mode(struct ata_port *ap, struct ata_device *adev) { struct pci_dev *pdev = to_pci_dev(ap->host->dev); static const u8 udma_bits[] = { 0xEE, 0xE8, 0xE6, 0xE4, 0xE2, 0xE1, 0xE0, 0xE0 }; - pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->pio_mode - XFER_UDMA_0]); + pci_write_config_byte(pdev, PATA_UDMA_TIMING, udma_bits[adev->dma_mode - XFER_UDMA_0]); } static const unsigned int svia_bar_sizes[] = { diff --git a/drivers/ata/sata_vsc.c b/drivers/ata/sata_vsc.c index 24344d0d0575..1920915dfa2c 100644 --- a/drivers/ata/sata_vsc.c +++ b/drivers/ata/sata_vsc.c @@ -47,7 +47,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_vsc" -#define DRV_VERSION "2.2" +#define DRV_VERSION "2.3" enum { VSC_MMIO_BAR = 0, |