aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/ata
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/ata')
-rw-r--r--drivers/ata/ahci_mtk.c6
-rw-r--r--drivers/ata/ahci_qoriq.c12
-rw-r--r--drivers/ata/libata-core.c12
-rw-r--r--drivers/ata/pata_pdc2027x.c16
4 files changed, 30 insertions, 16 deletions
diff --git a/drivers/ata/ahci_mtk.c b/drivers/ata/ahci_mtk.c
index 80854f71559a..0ae6971c2a4c 100644
--- a/drivers/ata/ahci_mtk.c
+++ b/drivers/ata/ahci_mtk.c
@@ -1,5 +1,5 @@
/*
- * MeidaTek AHCI SATA driver
+ * MediaTek AHCI SATA driver
*
* Copyright (c) 2017 MediaTek Inc.
* Author: Ryder Lee <ryder.lee@mediatek.com>
@@ -25,7 +25,7 @@
#include <linux/reset.h>
#include "ahci.h"
-#define DRV_NAME "ahci"
+#define DRV_NAME "ahci-mtk"
#define SYS_CFG 0x14
#define SYS_CFG_SATA_MSK GENMASK(31, 30)
@@ -192,5 +192,5 @@ static struct platform_driver mtk_ahci_driver = {
};
module_platform_driver(mtk_ahci_driver);
-MODULE_DESCRIPTION("MeidaTek SATA AHCI Driver");
+MODULE_DESCRIPTION("MediaTek SATA AHCI Driver");
MODULE_LICENSE("GPL v2");
diff --git a/drivers/ata/ahci_qoriq.c b/drivers/ata/ahci_qoriq.c
index b6b0bf76dfc7..2685f28160f7 100644
--- a/drivers/ata/ahci_qoriq.c
+++ b/drivers/ata/ahci_qoriq.c
@@ -35,6 +35,8 @@
/* port register default value */
#define AHCI_PORT_PHY_1_CFG 0xa003fffe
+#define AHCI_PORT_PHY2_CFG 0x28184d1f
+#define AHCI_PORT_PHY3_CFG 0x0e081509
#define AHCI_PORT_TRANS_CFG 0x08000029
#define AHCI_PORT_AXICC_CFG 0x3fffffff
@@ -183,6 +185,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+ writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+ writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
if (qpriv->is_dmacoherent)
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -190,6 +194,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
case AHCI_LS2080A:
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+ writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+ writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
if (qpriv->is_dmacoherent)
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -201,6 +207,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
writel(readl(qpriv->ecc_addr) | ECC_DIS_ARMV8_CH2,
qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+ writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+ writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
if (qpriv->is_dmacoherent)
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -212,6 +220,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
writel(readl(qpriv->ecc_addr) | ECC_DIS_LS1088A,
qpriv->ecc_addr);
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+ writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+ writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
if (qpriv->is_dmacoherent)
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
@@ -219,6 +229,8 @@ static int ahci_qoriq_phy_init(struct ahci_host_priv *hpriv)
case AHCI_LS2088A:
writel(AHCI_PORT_PHY_1_CFG, reg_base + PORT_PHY1);
+ writel(AHCI_PORT_PHY2_CFG, reg_base + PORT_PHY2);
+ writel(AHCI_PORT_PHY3_CFG, reg_base + PORT_PHY3);
writel(AHCI_PORT_TRANS_CFG, reg_base + PORT_TRANS);
if (qpriv->is_dmacoherent)
writel(AHCI_PORT_AXICC_CFG, reg_base + PORT_AXICC);
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2a882929de4a..8193b38a1cae 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -3082,13 +3082,19 @@ int sata_down_spd_limit(struct ata_link *link, u32 spd_limit)
bit = fls(mask) - 1;
mask &= ~(1 << bit);
- /* Mask off all speeds higher than or equal to the current
- * one. Force 1.5Gbps if current SPD is not available.
+ /*
+ * Mask off all speeds higher than or equal to the current one. At
+ * this point, if current SPD is not available and we previously
+ * recorded the link speed from SStatus, the driver has already
+ * masked off the highest bit so mask should already be 1 or 0.
+ * Otherwise, we should not force 1.5Gbps on a link where we have
+ * not previously recorded speed from SStatus. Just return in this
+ * case.
*/
if (spd > 1)
mask &= (1 << (spd - 1)) - 1;
else
- mask &= 1;
+ return -EINVAL;
/* were we already at the bottom? */
if (!mask)
diff --git a/drivers/ata/pata_pdc2027x.c b/drivers/ata/pata_pdc2027x.c
index ffd8d33c6e0f..6db2e34bd52f 100644
--- a/drivers/ata/pata_pdc2027x.c
+++ b/drivers/ata/pata_pdc2027x.c
@@ -82,7 +82,7 @@ static int pdc2027x_set_mode(struct ata_link *link, struct ata_device **r_failed
* is issued to the device. However, if the controller clock is 133MHz,
* the following tables must be used.
*/
-static struct pdc2027x_pio_timing {
+static const struct pdc2027x_pio_timing {
u8 value0, value1, value2;
} pdc2027x_pio_timing_tbl[] = {
{ 0xfb, 0x2b, 0xac }, /* PIO mode 0 */
@@ -92,7 +92,7 @@ static struct pdc2027x_pio_timing {
{ 0x23, 0x09, 0x25 }, /* PIO mode 4, IORDY on, Prefetch off */
};
-static struct pdc2027x_mdma_timing {
+static const struct pdc2027x_mdma_timing {
u8 value0, value1;
} pdc2027x_mdma_timing_tbl[] = {
{ 0xdf, 0x5f }, /* MDMA mode 0 */
@@ -100,7 +100,7 @@ static struct pdc2027x_mdma_timing {
{ 0x69, 0x25 }, /* MDMA mode 2 */
};
-static struct pdc2027x_udma_timing {
+static const struct pdc2027x_udma_timing {
u8 value0, value1, value2;
} pdc2027x_udma_timing_tbl[] = {
{ 0x4a, 0x0f, 0xd5 }, /* UDMA mode 0 */
@@ -649,7 +649,7 @@ static long pdc_detect_pll_input_clock(struct ata_host *host)
* @host: target ATA host
* @board_idx: board identifier
*/
-static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
+static void pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
{
long pll_clock;
@@ -665,8 +665,6 @@ static int pdc_hardware_init(struct ata_host *host, unsigned int board_idx)
/* Adjust PLL control register */
pdc_adjust_pll(host, pll_clock, board_idx);
-
- return 0;
}
/**
@@ -753,8 +751,7 @@ static int pdc2027x_init_one(struct pci_dev *pdev,
//pci_enable_intx(pdev);
/* initialize adapter */
- if (pdc_hardware_init(host, board_idx) != 0)
- return -EIO;
+ pdc_hardware_init(host, board_idx);
pci_set_master(pdev);
return ata_host_activate(host, pdev->irq, ata_bmdma_interrupt,
@@ -778,8 +775,7 @@ static int pdc2027x_reinit_one(struct pci_dev *pdev)
else
board_idx = PDC_UDMA_133;
- if (pdc_hardware_init(host, board_idx))
- return -EIO;
+ pdc_hardware_init(host, board_idx);
ata_host_resume(host);
return 0;
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.