1 files changed, 14 insertions, 38 deletions

diff --git a/drivers/bluetooth/hci_intel.c b/drivers/bluetooth/hci_intel.c
index 69760e2850d9..3d63ea37bd4c 100644
--- a/drivers/bluetooth/hci_intel.c
+++ b/drivers/bluetooth/hci_intel.c
@@ -502,7 +502,7 @@ static int intel_set_baudrate(struct hci_uart *hu, unsigned int speed)
 	/* Device will not accept speed change if Intel version has not been
 	 * previously requested.
 	 */
-	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
+	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_CMD_TIMEOUT);
 	if (IS_ERR(skb)) {
 		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
 			   PTR_ERR(skb));
@@ -542,7 +542,7 @@ static int intel_setup(struct hci_uart *hu)
 	struct intel_device *idev = NULL;
 	struct hci_dev *hdev = hu->hdev;
 	struct sk_buff *skb;
-	struct intel_version *ver;
+	struct intel_version ver;
 	struct intel_boot_params *params;
 	struct list_head *p;
 	const struct firmware *fw;
@@ -590,35 +590,16 @@ static int intel_setup(struct hci_uart *hu)
 	 * is in bootloader mode or if it already has operational firmware
 	 * loaded.
 	 */
-	skb = __hci_cmd_sync(hdev, 0xfc05, 0, NULL, HCI_INIT_TIMEOUT);
-	if (IS_ERR(skb)) {
-		bt_dev_err(hdev, "Reading Intel version information failed (%ld)",
-			   PTR_ERR(skb));
-		return PTR_ERR(skb);
-	}
-
-	if (skb->len != sizeof(*ver)) {
-		bt_dev_err(hdev, "Intel version event size mismatch");
-		kfree_skb(skb);
-		return -EILSEQ;
-	}
-
-	ver = (struct intel_version *)skb->data;
-	if (ver->status) {
-		bt_dev_err(hdev, "Intel version command failure (%02x)",
-			   ver->status);
-		err = -bt_to_errno(ver->status);
-		kfree_skb(skb);
+	 err = btintel_read_version(hdev, &ver);
+	 if (err)
 		return err;
-	}
 
 	/* The hardware platform number has a fixed value of 0x37 and
 	 * for now only accept this single value.
 	 */
-	if (ver->hw_platform != 0x37) {
+	if (ver.hw_platform != 0x37) {
 		bt_dev_err(hdev, "Unsupported Intel hardware platform (%u)",
-			   ver->hw_platform);
-		kfree_skb(skb);
+			   ver.hw_platform);
 		return -EINVAL;
 	}
 
@@ -627,14 +608,13 @@ static int intel_setup(struct hci_uart *hu)
 	 * put in place to ensure correct forward compatibility options
 	 * when newer hardware variants come along.
 	 */
-	if (ver->hw_variant != 0x0b) {
+	if (ver.hw_variant != 0x0b) {
 		bt_dev_err(hdev, "Unsupported Intel hardware variant (%u)",
-			   ver->hw_variant);
-		kfree_skb(skb);
+			   ver.hw_variant);
 		return -EINVAL;
 	}
 
-	btintel_version_info(hdev, ver);
+	btintel_version_info(hdev, &ver);
 
 	/* The firmware variant determines if the device is in bootloader
 	 * mode or is running operational firmware. The value 0x06 identifies
@@ -649,8 +629,7 @@ static int intel_setup(struct hci_uart *hu)
 	 * It is not possible to use the Secure Boot Parameters in this
 	 * case since that command is only available in bootloader mode.
 	 */
-	if (ver->fw_variant == 0x23) {
-		kfree_skb(skb);
+	if (ver.fw_variant == 0x23) {
 		clear_bit(STATE_BOOTLOADER, &intel->flags);
 		btintel_check_bdaddr(hdev);
 		return 0;
@@ -659,19 +638,16 @@ static int intel_setup(struct hci_uart *hu)
 	/* If the device is not in bootloader mode, then the only possible
 	 * choice is to return an error and abort the device initialization.
 	 */
-	if (ver->fw_variant != 0x06) {
+	if (ver.fw_variant != 0x06) {
 		bt_dev_err(hdev, "Unsupported Intel firmware variant (%u)",
-			   ver->fw_variant);
-		kfree_skb(skb);
+			   ver.fw_variant);
 		return -ENODEV;
 	}
 
-	kfree_skb(skb);
-
 	/* Read the secure boot parameters to identify the operating
 	 * details of the bootloader.
 	 */
-	skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_INIT_TIMEOUT);
+	skb = __hci_cmd_sync(hdev, 0xfc0d, 0, NULL, HCI_CMD_TIMEOUT);
 	if (IS_ERR(skb)) {
 		bt_dev_err(hdev, "Reading Intel boot parameters failed (%ld)",
 			   PTR_ERR(skb));
@@ -881,7 +857,7 @@ done:
 	set_bit(STATE_BOOTING, &intel->flags);
 
 	skb = __hci_cmd_sync(hdev, 0xfc01, sizeof(reset_param), reset_param,
-			     HCI_INIT_TIMEOUT);
+			     HCI_CMD_TIMEOUT);
 	if (IS_ERR(skb))
 		return PTR_ERR(skb);