diff options
Diffstat (limited to 'drivers/cdrom/cdu31a.h')
| -rw-r--r-- | drivers/cdrom/cdu31a.h | 411 |
1 files changed, 411 insertions, 0 deletions
diff --git a/drivers/cdrom/cdu31a.h b/drivers/cdrom/cdu31a.h new file mode 100644 index 000000000000..61d4768c412e --- /dev/null +++ b/drivers/cdrom/cdu31a.h @@ -0,0 +1,411 @@ +/* + * Definitions for a Sony interface CDROM drive. + * + * Corey Minyard (minyard@wf-rch.cirr.com) + * + * Copyright (C) 1993 Corey Minyard + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * General defines. + */ +#define SONY_XA_DISK_TYPE 0x20 + +/* + * Offsets (from the base address) and bits for the various write registers + * of the drive. + */ +#define SONY_CMD_REG_OFFSET 0 +#define SONY_PARAM_REG_OFFSET 1 +#define SONY_WRITE_REG_OFFSET 2 +#define SONY_CONTROL_REG_OFFSET 3 +# define SONY_ATTN_CLR_BIT 0x01 +# define SONY_RES_RDY_CLR_BIT 0x02 +# define SONY_DATA_RDY_CLR_BIT 0x04 +# define SONY_ATTN_INT_EN_BIT 0x08 +# define SONY_RES_RDY_INT_EN_BIT 0x10 +# define SONY_DATA_RDY_INT_EN_BIT 0x20 +# define SONY_PARAM_CLR_BIT 0x40 +# define SONY_DRIVE_RESET_BIT 0x80 + +/* + * Offsets (from the base address) and bits for the various read registers + * of the drive. + */ +#define SONY_STATUS_REG_OFFSET 0 +# define SONY_ATTN_BIT 0x01 +# define SONY_RES_RDY_BIT 0x02 +# define SONY_DATA_RDY_BIT 0x04 +# define SONY_ATTN_INT_ST_BIT 0x08 +# define SONY_RES_RDY_INT_ST_BIT 0x10 +# define SONY_DATA_RDY_INT_ST_BIT 0x20 +# define SONY_DATA_REQUEST_BIT 0x40 +# define SONY_BUSY_BIT 0x80 +#define SONY_RESULT_REG_OFFSET 1 +#define SONY_READ_REG_OFFSET 2 +#define SONY_FIFOST_REG_OFFSET 3 +# define SONY_PARAM_WRITE_RDY_BIT 0x01 +# define SONY_PARAM_REG_EMPTY_BIT 0x02 +# define SONY_RES_REG_NOT_EMP_BIT 0x04 +# define SONY_RES_REG_FULL_BIT 0x08 + +#define LOG_START_OFFSET 150 /* Offset of first logical sector */ + +#define SONY_DETECT_TIMEOUT (8*HZ/10) /* Maximum amount of time + that drive detection code + will wait for response + from drive (in 1/100th's + of seconds). */ + +#define SONY_JIFFIES_TIMEOUT (10*HZ) /* Maximum number of times the + drive will wait/try for an + operation */ +#define SONY_RESET_TIMEOUT HZ /* Maximum number of times the + drive will wait/try a reset + operation */ +#define SONY_READY_RETRIES 20000 /* How many times to retry a + spin waiting for a register + to come ready */ + +#define MAX_CDU31A_RETRIES 3 /* How many times to retry an + operation */ + +/* Commands to request or set drive control parameters and disc information */ +#define SONY_REQ_DRIVE_CONFIG_CMD 0x00 /* Returns s_sony_drive_config */ +#define SONY_REQ_DRIVE_MODE_CMD 0x01 +#define SONY_REQ_DRIVE_PARAM_CMD 0x02 +#define SONY_REQ_MECH_STATUS_CMD 0x03 +#define SONY_REQ_AUDIO_STATUS_CMD 0x04 +#define SONY_SET_DRIVE_PARAM_CMD 0x10 +#define SONY_REQ_TOC_DATA_CMD 0x20 /* Returns s_sony_toc */ +#define SONY_REQ_SUBCODE_ADDRESS_CMD 0x21 /* Returns s_sony_subcode */ +#define SONY_REQ_UPC_EAN_CMD 0x22 +#define SONY_REQ_ISRC_CMD 0x23 +#define SONY_REQ_TOC_DATA_SPEC_CMD 0x24 /* Returns s_sony_session_toc */ + +/* Commands to request information from the drive */ +#define SONY_READ_TOC_CMD 0x30 /* let the drive firmware grab the TOC */ +#define SONY_SEEK_CMD 0x31 +#define SONY_READ_CMD 0x32 +#define SONY_READ_BLKERR_STAT_CMD 0x34 +#define SONY_ABORT_CMD 0x35 +#define SONY_READ_TOC_SPEC_CMD 0x36 + +/* Commands to control audio */ +#define SONY_AUDIO_PLAYBACK_CMD 0x40 +#define SONY_AUDIO_STOP_CMD 0x41 +#define SONY_AUDIO_SCAN_CMD 0x42 + +/* Miscellaneous control commands */ +#define SONY_EJECT_CMD 0x50 +#define SONY_SPIN_UP_CMD 0x51 +#define SONY_SPIN_DOWN_CMD 0x52 + +/* Diagnostic commands */ +#define SONY_WRITE_BUFFER_CMD 0x60 +#define SONY_READ_BUFFER_CMD 0x61 +#define SONY_DIAGNOSTICS_CMD 0x62 + + +/* + * The following are command parameters for the set drive parameter command + */ +#define SONY_SD_DECODE_PARAM 0x00 +#define SONY_SD_INTERFACE_PARAM 0x01 +#define SONY_SD_BUFFERING_PARAM 0x02 +#define SONY_SD_AUDIO_PARAM 0x03 +#define SONY_SD_AUDIO_VOLUME 0x04 +#define SONY_SD_MECH_CONTROL 0x05 +#define SONY_SD_AUTO_SPIN_DOWN_TIME 0x06 + +/* + * The following are parameter bits for the mechanical control command + */ +#define SONY_AUTO_SPIN_UP_BIT 0x01 +#define SONY_AUTO_EJECT_BIT 0x02 +#define SONY_DOUBLE_SPEED_BIT 0x04 + +/* + * The following extract information from the drive configuration about + * the drive itself. + */ +#define SONY_HWC_GET_LOAD_MECH(c) (c.hw_config[0] & 0x03) +#define SONY_HWC_EJECT(c) (c.hw_config[0] & 0x04) +#define SONY_HWC_LED_SUPPORT(c) (c.hw_config[0] & 0x08) +#define SONY_HWC_DOUBLE_SPEED(c) (c.hw_config[0] & 0x10) +#define SONY_HWC_GET_BUF_MEM_SIZE(c) ((c.hw_config[0] & 0xc0) >> 6) +#define SONY_HWC_AUDIO_PLAYBACK(c) (c.hw_config[1] & 0x01) +#define SONY_HWC_ELECTRIC_VOLUME(c) (c.hw_config[1] & 0x02) +#define SONY_HWC_ELECTRIC_VOLUME_CTL(c) (c.hw_config[1] & 0x04) + +#define SONY_HWC_CADDY_LOAD_MECH 0x00 +#define SONY_HWC_TRAY_LOAD_MECH 0x01 +#define SONY_HWC_POPUP_LOAD_MECH 0x02 +#define SONY_HWC_UNKWN_LOAD_MECH 0x03 + +#define SONY_HWC_8KB_BUFFER 0x00 +#define SONY_HWC_32KB_BUFFER 0x01 +#define SONY_HWC_64KB_BUFFER 0x02 +#define SONY_HWC_UNKWN_BUFFER 0x03 + +/* + * This is the complete status returned from the drive configuration request + * command. + */ +struct s_sony_drive_config +{ + unsigned char exec_status[2]; + char vendor_id[8]; + char product_id[16]; + char product_rev_level[8]; + unsigned char hw_config[2]; +}; + +/* The following is returned from the request subcode address command */ +struct s_sony_subcode +{ + unsigned char exec_status[2]; + unsigned char address :4; + unsigned char control :4; + unsigned char track_num; + unsigned char index_num; + unsigned char rel_msf[3]; + unsigned char reserved1; + unsigned char abs_msf[3]; +}; + +#define MAX_TRACKS 100 /* The maximum tracks a disk may have. */ +/* + * The following is returned from the request TOC (Table Of Contents) command. + * (last_track_num-first_track_num+1) values are valid in tracks. + */ +struct s_sony_toc +{ + unsigned char exec_status[2]; + unsigned char address0 :4; + unsigned char control0 :4; + unsigned char point0; + unsigned char first_track_num; + unsigned char disk_type; + unsigned char dummy0; + unsigned char address1 :4; + unsigned char control1 :4; + unsigned char point1; + unsigned char last_track_num; + unsigned char dummy1; + unsigned char dummy2; + unsigned char address2 :4; + unsigned char control2 :4; + unsigned char point2; + unsigned char lead_out_start_msf[3]; + struct + { + unsigned char address :4; + unsigned char control :4; + unsigned char track; + unsigned char track_start_msf[3]; + } tracks[MAX_TRACKS]; + + unsigned int lead_out_start_lba; +}; + +struct s_sony_session_toc +{ + unsigned char exec_status[2]; + unsigned char session_number; + unsigned char address0 :4; + unsigned char control0 :4; + unsigned char point0; + unsigned char first_track_num; + unsigned char disk_type; + unsigned char dummy0; + unsigned char address1 :4; + unsigned char control1 :4; + unsigned char point1; + unsigned char last_track_num; + unsigned char dummy1; + unsigned char dummy2; + unsigned char address2 :4; + unsigned char control2 :4; + unsigned char point2; + unsigned char lead_out_start_msf[3]; + unsigned char addressb0 :4; + unsigned char controlb0 :4; + unsigned char pointb0; + unsigned char next_poss_prog_area_msf[3]; + unsigned char num_mode_5_pointers; + unsigned char max_start_outer_leadout_msf[3]; + unsigned char addressb1 :4; + unsigned char controlb1 :4; + unsigned char pointb1; + unsigned char dummyb0_1[4]; + unsigned char num_skip_interval_pointers; + unsigned char num_skip_track_assignments; + unsigned char dummyb0_2; + unsigned char addressb2 :4; + unsigned char controlb2 :4; + unsigned char pointb2; + unsigned char tracksb2[7]; + unsigned char addressb3 :4; + unsigned char controlb3 :4; + unsigned char pointb3; + unsigned char tracksb3[7]; + unsigned char addressb4 :4; + unsigned char controlb4 :4; + unsigned char pointb4; + unsigned char tracksb4[7]; + unsigned char addressc0 :4; + unsigned char controlc0 :4; + unsigned char pointc0; + unsigned char dummyc0[7]; + struct + { + unsigned char address :4; + unsigned char control :4; + unsigned char track; + unsigned char track_start_msf[3]; + } tracks[MAX_TRACKS]; + + unsigned int start_track_lba; + unsigned int lead_out_start_lba; + unsigned int mint; + unsigned int maxt; +}; + +struct s_all_sessions_toc +{ + unsigned char sessions; + unsigned int track_entries; + unsigned char first_track_num; + unsigned char last_track_num; + unsigned char disk_type; + unsigned char lead_out_start_msf[3]; + struct + { + unsigned char address :4; + unsigned char control :4; + unsigned char track; + unsigned char track_start_msf[3]; + } tracks[MAX_TRACKS]; + + unsigned int start_track_lba; + unsigned int lead_out_start_lba; +}; + + +/* + * The following are errors returned from the drive. + */ + +/* Command error group */ +#define SONY_ILL_CMD_ERR 0x10 +#define SONY_ILL_PARAM_ERR 0x11 + +/* Mechanism group */ +#define SONY_NOT_LOAD_ERR 0x20 +#define SONY_NO_DISK_ERR 0x21 +#define SONY_NOT_SPIN_ERR 0x22 +#define SONY_SPIN_ERR 0x23 +#define SONY_SPINDLE_SERVO_ERR 0x25 +#define SONY_FOCUS_SERVO_ERR 0x26 +#define SONY_EJECT_MECH_ERR 0x29 +#define SONY_AUDIO_PLAYING_ERR 0x2a +#define SONY_EMERGENCY_EJECT_ERR 0x2c + +/* Seek error group */ +#define SONY_FOCUS_ERR 0x30 +#define SONY_FRAME_SYNC_ERR 0x31 +#define SONY_SUBCODE_ADDR_ERR 0x32 +#define SONY_BLOCK_SYNC_ERR 0x33 +#define SONY_HEADER_ADDR_ERR 0x34 + +/* Read error group */ +#define SONY_ILL_TRACK_R_ERR 0x40 +#define SONY_MODE_0_R_ERR 0x41 +#define SONY_ILL_MODE_R_ERR 0x42 +#define SONY_ILL_BLOCK_SIZE_R_ERR 0x43 +#define SONY_MODE_R_ERR 0x44 +#define SONY_FORM_R_ERR 0x45 +#define SONY_LEAD_OUT_R_ERR 0x46 +#define SONY_BUFFER_OVERRUN_R_ERR 0x47 + +/* Data error group */ +#define SONY_UNREC_CIRC_ERR 0x53 +#define SONY_UNREC_LECC_ERR 0x57 + +/* Subcode error group */ +#define SONY_NO_TOC_ERR 0x60 +#define SONY_SUBCODE_DATA_NVAL_ERR 0x61 +#define SONY_FOCUS_ON_TOC_READ_ERR 0x63 +#define SONY_FRAME_SYNC_ON_TOC_READ_ERR 0x64 +#define SONY_TOC_DATA_ERR 0x65 + +/* Hardware failure group */ +#define SONY_HW_FAILURE_ERR 0x70 +#define SONY_LEAD_IN_A_ERR 0x91 +#define SONY_LEAD_OUT_A_ERR 0x92 +#define SONY_DATA_TRACK_A_ERR 0x93 + +/* + * The following are returned from the Read With Block Error Status command. + * They are not errors but information (Errors from the 0x5x group above may + * also be returned + */ +#define SONY_NO_CIRC_ERR_BLK_STAT 0x50 +#define SONY_NO_LECC_ERR_BLK_STAT 0x54 +#define SONY_RECOV_LECC_ERR_BLK_STAT 0x55 +#define SONY_NO_ERR_DETECTION_STAT 0x59 + +/* + * The following is not an error returned by the drive, but by the code + * that talks to the drive. It is returned because of a timeout. + */ +#define SONY_TIMEOUT_OP_ERR 0x01 +#define SONY_SIGNAL_OP_ERR 0x02 +#define SONY_BAD_DATA_ERR 0x03 + + +/* + * The following are attention code for asynchronous events from the drive. + */ + +/* Standard attention group */ +#define SONY_EMER_EJECT_ATTN 0x2c +#define SONY_HW_FAILURE_ATTN 0x70 +#define SONY_MECH_LOADED_ATTN 0x80 +#define SONY_EJECT_PUSHED_ATTN 0x81 + +/* Audio attention group */ +#define SONY_AUDIO_PLAY_DONE_ATTN 0x90 +#define SONY_LEAD_IN_ERR_ATTN 0x91 +#define SONY_LEAD_OUT_ERR_ATTN 0x92 +#define SONY_DATA_TRACK_ERR_ATTN 0x93 +#define SONY_AUDIO_PLAYBACK_ERR_ATTN 0x94 + +/* Auto spin up group */ +#define SONY_SPIN_UP_COMPLETE_ATTN 0x24 +#define SONY_SPINDLE_SERVO_ERR_ATTN 0x25 +#define SONY_FOCUS_SERVO_ERR_ATTN 0x26 +#define SONY_TOC_READ_DONE_ATTN 0x62 +#define SONY_FOCUS_ON_TOC_READ_ERR_ATTN 0x63 +#define SONY_SYNC_ON_TOC_READ_ERR_ATTN 0x65 + +/* Auto eject group */ +#define SONY_SPIN_DOWN_COMPLETE_ATTN 0x27 +#define SONY_EJECT_COMPLETE_ATTN 0x28 +#define SONY_EJECT_MECH_ERR_ATTN 0x29 |