diff options
Diffstat (limited to 'drivers/char/ipmi/ipmi_si_hardcode.c')
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_hardcode.c | 146 |
1 files changed, 146 insertions, 0 deletions
diff --git a/drivers/char/ipmi/ipmi_si_hardcode.c b/drivers/char/ipmi/ipmi_si_hardcode.c new file mode 100644 index 000000000000..fa9a4780de36 --- /dev/null +++ b/drivers/char/ipmi/ipmi_si_hardcode.c @@ -0,0 +1,146 @@ + +#include <linux/moduleparam.h> +#include "ipmi_si.h" + +#define PFX "ipmi_hardcode: " +/* + * There can be 4 IO ports passed in (with or without IRQs), 4 addresses, + * a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS. + */ + +#define SI_MAX_PARMS 4 + +static char *si_type[SI_MAX_PARMS]; +#define MAX_SI_TYPE_STR 30 +static char si_type_str[MAX_SI_TYPE_STR]; +static unsigned long addrs[SI_MAX_PARMS]; +static unsigned int num_addrs; +static unsigned int ports[SI_MAX_PARMS]; +static unsigned int num_ports; +static int irqs[SI_MAX_PARMS]; +static unsigned int num_irqs; +static int regspacings[SI_MAX_PARMS]; +static unsigned int num_regspacings; +static int regsizes[SI_MAX_PARMS]; +static unsigned int num_regsizes; +static int regshifts[SI_MAX_PARMS]; +static unsigned int num_regshifts; +static int slave_addrs[SI_MAX_PARMS]; /* Leaving 0 chooses the default value */ +static unsigned int num_slave_addrs; + +module_param_string(type, si_type_str, MAX_SI_TYPE_STR, 0); +MODULE_PARM_DESC(type, "Defines the type of each interface, each" + " interface separated by commas. The types are 'kcs'," + " 'smic', and 'bt'. For example si_type=kcs,bt will set" + " the first interface to kcs and the second to bt"); +module_param_hw_array(addrs, ulong, iomem, &num_addrs, 0); +MODULE_PARM_DESC(addrs, "Sets the memory address of each interface, the" + " addresses separated by commas. Only use if an interface" + " is in memory. Otherwise, set it to zero or leave" + " it blank."); +module_param_hw_array(ports, uint, ioport, &num_ports, 0); +MODULE_PARM_DESC(ports, "Sets the port address of each interface, the" + " addresses separated by commas. Only use if an interface" + " is a port. Otherwise, set it to zero or leave" + " it blank."); +module_param_hw_array(irqs, int, irq, &num_irqs, 0); +MODULE_PARM_DESC(irqs, "Sets the interrupt of each interface, the" + " addresses separated by commas. Only use if an interface" + " has an interrupt. Otherwise, set it to zero or leave" + " it blank."); +module_param_hw_array(regspacings, int, other, &num_regspacings, 0); +MODULE_PARM_DESC(regspacings, "The number of bytes between the start address" + " and each successive register used by the interface. For" + " instance, if the start address is 0xca2 and the spacing" + " is 2, then the second address is at 0xca4. Defaults" + " to 1."); +module_param_hw_array(regsizes, int, other, &num_regsizes, 0); +MODULE_PARM_DESC(regsizes, "The size of the specific IPMI register in bytes." + " This should generally be 1, 2, 4, or 8 for an 8-bit," + " 16-bit, 32-bit, or 64-bit register. Use this if you" + " the 8-bit IPMI register has to be read from a larger" + " register."); +module_param_hw_array(regshifts, int, other, &num_regshifts, 0); +MODULE_PARM_DESC(regshifts, "The amount to shift the data read from the." + " IPMI register, in bits. For instance, if the data" + " is read from a 32-bit word and the IPMI data is in" + " bit 8-15, then the shift would be 8"); +module_param_hw_array(slave_addrs, int, other, &num_slave_addrs, 0); +MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" + " the controller. Normally this is 0x20, but can be" + " overridden by this parm. This is an array indexed" + " by interface number."); + +int ipmi_si_hardcode_find_bmc(void) +{ + int ret = -ENODEV; + int i; + struct si_sm_io io; + char *str; + + /* Parse out the si_type string into its components. */ + str = si_type_str; + if (*str != '\0') { + for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) { + si_type[i] = str; + str = strchr(str, ','); + if (str) { + *str = '\0'; + str++; + } else { + break; + } + } + } + + memset(&io, 0, sizeof(io)); + for (i = 0; i < SI_MAX_PARMS; i++) { + if (!ports[i] && !addrs[i]) + continue; + + io.addr_source = SI_HARDCODED; + pr_info(PFX "probing via hardcoded address\n"); + + if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) { + io.si_type = SI_KCS; + } else if (strcmp(si_type[i], "smic") == 0) { + io.si_type = SI_SMIC; + } else if (strcmp(si_type[i], "bt") == 0) { + io.si_type = SI_BT; + } else { + pr_warn(PFX "Interface type specified for interface %d, was invalid: %s\n", + i, si_type[i]); + continue; + } + + if (ports[i]) { + /* An I/O port */ + io.addr_data = ports[i]; + io.addr_type = IPMI_IO_ADDR_SPACE; + } else if (addrs[i]) { + /* A memory port */ + io.addr_data = addrs[i]; + io.addr_type = IPMI_MEM_ADDR_SPACE; + } else { + pr_warn(PFX "Interface type specified for interface %d, but port and address were not set or set to zero.\n", + i); + continue; + } + + io.addr = NULL; + io.regspacing = regspacings[i]; + if (!io.regspacing) + io.regspacing = DEFAULT_REGSPACING; + io.regsize = regsizes[i]; + if (!io.regsize) + io.regsize = DEFAULT_REGSIZE; + io.regshift = regshifts[i]; + io.irq = irqs[i]; + if (io.irq) + io.irq_setup = ipmi_std_irq_setup; + io.slave_addr = slave_addrs[i]; + + ret = ipmi_si_add_smi(&io); + } + return ret; +} |