diff options
Diffstat (limited to 'drivers/char/ipmi/ipmi_si_intf.c')
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 418 |
1 files changed, 216 insertions, 202 deletions
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index a44b97304e95..b6e5cbfb09f8 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -61,11 +61,11 @@ # endif static inline void add_usec_to_timer(struct timer_list *t, long v) { - t->sub_expires += nsec_to_arch_cycle(v * 1000); - while (t->sub_expires >= arch_cycles_per_jiffy) + t->arch_cycle_expires += nsec_to_arch_cycle(v * 1000); + while (t->arch_cycle_expires >= arch_cycles_per_jiffy) { t->expires++; - t->sub_expires -= arch_cycles_per_jiffy; + t->arch_cycle_expires -= arch_cycles_per_jiffy; } } #endif @@ -75,8 +75,7 @@ static inline void add_usec_to_timer(struct timer_list *t, long v) #include <asm/io.h> #include "ipmi_si_sm.h" #include <linux/init.h> - -#define IPMI_SI_VERSION "v33" +#include <linux/dmi.h> /* Measure times between events in the driver. */ #undef DEBUG_TIMING @@ -109,6 +108,21 @@ enum si_type { SI_KCS, SI_SMIC, SI_BT }; +struct ipmi_device_id { + unsigned char device_id; + unsigned char device_revision; + unsigned char firmware_revision_1; + unsigned char firmware_revision_2; + unsigned char ipmi_version; + unsigned char additional_device_support; + unsigned char manufacturer_id[3]; + unsigned char product_id[2]; + unsigned char aux_firmware_revision[4]; +} __attribute__((packed)); + +#define ipmi_version_major(v) ((v)->ipmi_version & 0xf) +#define ipmi_version_minor(v) ((v)->ipmi_version >> 4) + struct smi_info { ipmi_smi_t intf; @@ -131,12 +145,24 @@ struct smi_info void (*irq_cleanup)(struct smi_info *info); unsigned int io_size; + /* Per-OEM handler, called from handle_flags(). + Returns 1 when handle_flags() needs to be re-run + or 0 indicating it set si_state itself. + */ + int (*oem_data_avail_handler)(struct smi_info *smi_info); + /* Flags from the last GET_MSG_FLAGS command, used when an ATTN is set to hold the flags until we are done handling everything from the flags. */ #define RECEIVE_MSG_AVAIL 0x01 #define EVENT_MSG_BUFFER_FULL 0x02 #define WDT_PRE_TIMEOUT_INT 0x08 +#define OEM0_DATA_AVAIL 0x20 +#define OEM1_DATA_AVAIL 0x40 +#define OEM2_DATA_AVAIL 0x80 +#define OEM_DATA_AVAIL (OEM0_DATA_AVAIL | \ + OEM1_DATA_AVAIL | \ + OEM2_DATA_AVAIL) unsigned char msg_flags; /* If set to true, this will request events the next time the @@ -175,11 +201,7 @@ struct smi_info interrupts. */ int interrupt_disabled; - unsigned char ipmi_si_dev_rev; - unsigned char ipmi_si_fw_rev_major; - unsigned char ipmi_si_fw_rev_minor; - unsigned char ipmi_version_major; - unsigned char ipmi_version_minor; + struct ipmi_device_id device_id; /* Slave address, could be reported from DMI. */ unsigned char slave_addr; @@ -245,7 +267,7 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) entry = smi_info->xmit_msgs.next; } - if (!entry) { + if (! entry) { smi_info->curr_msg = NULL; rv = SI_SM_IDLE; } else { @@ -306,7 +328,7 @@ static void start_clear_flags(struct smi_info *smi_info) memory, we will re-enable the interrupt. */ static inline void disable_si_irq(struct smi_info *smi_info) { - if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { + if ((smi_info->irq) && (! smi_info->interrupt_disabled)) { disable_irq_nosync(smi_info->irq); smi_info->interrupt_disabled = 1; } @@ -322,6 +344,7 @@ static inline void enable_si_irq(struct smi_info *smi_info) static void handle_flags(struct smi_info *smi_info) { + retry: if (smi_info->msg_flags & WDT_PRE_TIMEOUT_INT) { /* Watchdog pre-timeout */ spin_lock(&smi_info->count_lock); @@ -336,7 +359,7 @@ static void handle_flags(struct smi_info *smi_info) } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) { /* Messages available. */ smi_info->curr_msg = ipmi_alloc_smi_msg(); - if (!smi_info->curr_msg) { + if (! smi_info->curr_msg) { disable_si_irq(smi_info); smi_info->si_state = SI_NORMAL; return; @@ -355,7 +378,7 @@ static void handle_flags(struct smi_info *smi_info) } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) { /* Events available. */ smi_info->curr_msg = ipmi_alloc_smi_msg(); - if (!smi_info->curr_msg) { + if (! smi_info->curr_msg) { disable_si_irq(smi_info); smi_info->si_state = SI_NORMAL; return; @@ -371,6 +394,10 @@ static void handle_flags(struct smi_info *smi_info) smi_info->curr_msg->data, smi_info->curr_msg->data_size); smi_info->si_state = SI_GETTING_EVENTS; + } else if (smi_info->msg_flags & OEM_DATA_AVAIL) { + if (smi_info->oem_data_avail_handler) + if (smi_info->oem_data_avail_handler(smi_info)) + goto retry; } else { smi_info->si_state = SI_NORMAL; } @@ -387,7 +414,7 @@ static void handle_transaction_done(struct smi_info *smi_info) #endif switch (smi_info->si_state) { case SI_NORMAL: - if (!smi_info->curr_msg) + if (! smi_info->curr_msg) break; smi_info->curr_msg->rsp_size @@ -761,18 +788,20 @@ static void si_restart_short_timer(struct smi_info *smi_info) #if defined(CONFIG_HIGH_RES_TIMERS) unsigned long flags; unsigned long jiffies_now; + unsigned long seq; if (del_timer(&(smi_info->si_timer))) { /* If we don't delete the timer, then it will go off immediately, anyway. So we only process if we actually delete the timer. */ - /* We already have irqsave on, so no need for it - here. */ - read_lock(&xtime_lock); - jiffies_now = jiffies; - smi_info->si_timer.expires = jiffies_now; - smi_info->si_timer.sub_expires = get_arch_cycles(jiffies_now); + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + jiffies_now = jiffies; + smi_info->si_timer.expires = jiffies_now; + smi_info->si_timer.arch_cycle_expires + = get_arch_cycles(jiffies_now); + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC); @@ -826,15 +855,19 @@ static void smi_timeout(unsigned long data) /* If the state machine asks for a short delay, then shorten the timer timeout. */ if (smi_result == SI_SM_CALL_WITH_DELAY) { +#if defined(CONFIG_HIGH_RES_TIMERS) + unsigned long seq; +#endif spin_lock_irqsave(&smi_info->count_lock, flags); smi_info->short_timeouts++; spin_unlock_irqrestore(&smi_info->count_lock, flags); #if defined(CONFIG_HIGH_RES_TIMERS) - read_lock(&xtime_lock); - smi_info->si_timer.expires = jiffies; - smi_info->si_timer.sub_expires - = get_arch_cycles(smi_info->si_timer.expires); - read_unlock(&xtime_lock); + do { + seq = read_seqbegin_irqsave(&xtime_lock, flags); + smi_info->si_timer.expires = jiffies; + smi_info->si_timer.arch_cycle_expires + = get_arch_cycles(smi_info->si_timer.expires); + } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); add_usec_to_timer(&smi_info->si_timer, SI_SHORT_TIMEOUT_USEC); #else smi_info->si_timer.expires = jiffies + 1; @@ -845,7 +878,7 @@ static void smi_timeout(unsigned long data) spin_unlock_irqrestore(&smi_info->count_lock, flags); smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; #if defined(CONFIG_HIGH_RES_TIMERS) - smi_info->si_timer.sub_expires = 0; + smi_info->si_timer.arch_cycle_expires = 0; #endif } @@ -986,7 +1019,7 @@ MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" #define IPMI_MEM_ADDR_SPACE 1 #define IPMI_IO_ADDR_SPACE 2 -#if defined(CONFIG_ACPI_INTERPRETER) || defined(CONFIG_X86) || defined(CONFIG_PCI) +#if defined(CONFIG_ACPI) || defined(CONFIG_X86) || defined(CONFIG_PCI) static int is_new_interface(int intf, u8 addr_space, unsigned long base_addr) { int i; @@ -1014,7 +1047,7 @@ static int std_irq_setup(struct smi_info *info) { int rv; - if (!info->irq) + if (! info->irq) return 0; if (info->si_type == SI_BT) { @@ -1023,7 +1056,7 @@ static int std_irq_setup(struct smi_info *info) SA_INTERRUPT, DEVICE_NAME, info); - if (!rv) + if (! rv) /* Enable the interrupt in the BT interface. */ info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, IPMI_BT_INTMASK_ENABLE_IRQ_BIT); @@ -1048,7 +1081,7 @@ static int std_irq_setup(struct smi_info *info) static void std_irq_cleanup(struct smi_info *info) { - if (!info->irq) + if (! info->irq) return; if (info->si_type == SI_BT) @@ -1121,7 +1154,7 @@ static int port_setup(struct smi_info *info) unsigned int *addr = info->io.info; int mapsize; - if (!addr || (!*addr)) + if (! addr || (! *addr)) return -ENODEV; info->io_cleanup = port_cleanup; @@ -1164,15 +1197,15 @@ static int try_init_port(int intf_num, struct smi_info **new_info) { struct smi_info *info; - if (!ports[intf_num]) + if (! ports[intf_num]) return -ENODEV; - if (!is_new_interface(intf_num, IPMI_IO_ADDR_SPACE, + if (! is_new_interface(intf_num, IPMI_IO_ADDR_SPACE, ports[intf_num])) return -ENODEV; info = kmalloc(sizeof(*info), GFP_KERNEL); - if (!info) { + if (! info) { printk(KERN_ERR "ipmi_si: Could not allocate SI data (1)\n"); return -ENOMEM; } @@ -1182,10 +1215,10 @@ static int try_init_port(int intf_num, struct smi_info **new_info) info->io.info = &(ports[intf_num]); info->io.addr = NULL; info->io.regspacing = regspacings[intf_num]; - if (!info->io.regspacing) + if (! info->io.regspacing) info->io.regspacing = DEFAULT_REGSPACING; info->io.regsize = regsizes[intf_num]; - if (!info->io.regsize) + if (! info->io.regsize) info->io.regsize = DEFAULT_REGSPACING; info->io.regshift = regshifts[intf_num]; info->irq = 0; @@ -1270,7 +1303,7 @@ static int mem_setup(struct smi_info *info) unsigned long *addr = info->io.info; int mapsize; - if (!addr || (!*addr)) + if (! addr || (! *addr)) return -ENODEV; info->io_cleanup = mem_cleanup; @@ -1325,15 +1358,15 @@ static int try_init_mem(int intf_num, struct smi_info **new_info) { struct smi_info *info; - if (!addrs[intf_num]) + if (! addrs[intf_num]) return -ENODEV; - if (!is_new_interface(intf_num, IPMI_MEM_ADDR_SPACE, + if (! is_new_interface(intf_num, IPMI_MEM_ADDR_SPACE, addrs[intf_num])) return -ENODEV; info = kmalloc(sizeof(*info), GFP_KERNEL); - if (!info) { + if (! info) { printk(KERN_ERR "ipmi_si: Could not allocate SI data (2)\n"); return -ENOMEM; } @@ -1343,10 +1376,10 @@ static int try_init_mem(int intf_num, struct smi_info **new_info) info->io.info = &addrs[intf_num]; info->io.addr = NULL; info->io.regspacing = regspacings[intf_num]; - if (!info->io.regspacing) + if (! info->io.regspacing) info->io.regspacing = DEFAULT_REGSPACING; info->io.regsize = regsizes[intf_num]; - if (!info->io.regsize) + if (! info->io.regsize) info->io.regsize = DEFAULT_REGSPACING; info->io.regshift = regshifts[intf_num]; info->irq = 0; @@ -1362,7 +1395,7 @@ static int try_init_mem(int intf_num, struct smi_info **new_info) } -#ifdef CONFIG_ACPI_INTERPRETER +#ifdef CONFIG_ACPI #include <linux/acpi.h> @@ -1404,7 +1437,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) { acpi_status status; - if (!info->irq) + if (! info->irq) return 0; /* FIXME - is level triggered right? */ @@ -1428,7 +1461,7 @@ static int acpi_gpe_irq_setup(struct smi_info *info) static void acpi_gpe_irq_cleanup(struct smi_info *info) { - if (!info->irq) + if (! info->irq) return; acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe); @@ -1484,6 +1517,9 @@ static int try_init_acpi(int intf_num, struct smi_info **new_info) char *io_type; u8 addr_space; + if (acpi_disabled) + return -ENODEV; + if (acpi_failure) return -ENODEV; @@ -1504,10 +1540,10 @@ static int try_init_acpi(int intf_num, struct smi_info **new_info) addr_space = IPMI_MEM_ADDR_SPACE; else addr_space = IPMI_IO_ADDR_SPACE; - if (!is_new_interface(-1, addr_space, spmi->addr.address)) + if (! is_new_interface(-1, addr_space, spmi->addr.address)) return -ENODEV; - if (!spmi->addr.register_bit_width) { + if (! spmi->addr.register_bit_width) { acpi_failure = 1; return -ENODEV; } @@ -1534,7 +1570,7 @@ static int try_init_acpi(int intf_num, struct smi_info **new_info) } info = kmalloc(sizeof(*info), GFP_KERNEL); - if (!info) { + if (! info) { printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n"); return -ENOMEM; } @@ -1610,22 +1646,15 @@ typedef struct dmi_ipmi_data static dmi_ipmi_data_t dmi_data[SI_MAX_DRIVERS]; static int dmi_data_entries; -typedef struct dmi_header -{ - u8 type; - u8 length; - u16 handle; -} dmi_header_t; - -static int decode_dmi(dmi_header_t __iomem *dm, int intf_num) +static int __init decode_dmi(struct dmi_header *dm, int intf_num) { - u8 __iomem *data = (u8 __iomem *)dm; + u8 *data = (u8 *)dm; unsigned long base_addr; u8 reg_spacing; - u8 len = readb(&dm->length); + u8 len = dm->length; dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; - ipmi_data->type = readb(&data[4]); + ipmi_data->type = data[4]; memcpy(&base_addr, data+8, sizeof(unsigned long)); if (len >= 0x11) { @@ -1640,12 +1669,12 @@ static int decode_dmi(dmi_header_t __iomem *dm, int intf_num) } /* If bit 4 of byte 0x10 is set, then the lsb for the address is odd. */ - ipmi_data->base_addr = base_addr | ((readb(&data[0x10]) & 0x10) >> 4); + ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); - ipmi_data->irq = readb(&data[0x11]); + ipmi_data->irq = data[0x11]; /* The top two bits of byte 0x10 hold the register spacing. */ - reg_spacing = (readb(&data[0x10]) & 0xC0) >> 6; + reg_spacing = (data[0x10] & 0xC0) >> 6; switch(reg_spacing){ case 0x00: /* Byte boundaries */ ipmi_data->offset = 1; @@ -1673,7 +1702,7 @@ static int decode_dmi(dmi_header_t __iomem *dm, int intf_num) ipmi_data->offset = 1; } - ipmi_data->slave_addr = readb(&data[6]); + ipmi_data->slave_addr = data[6]; if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) { dmi_data_entries++; @@ -1685,94 +1714,29 @@ static int decode_dmi(dmi_header_t __iomem *dm, int intf_num) return -1; } -static int dmi_table(u32 base, int len, int num) +static void __init dmi_find_bmc(void) { - u8 __iomem *buf; - struct dmi_header __iomem *dm; - u8 __iomem *data; - int i=1; - int status=-1; + struct dmi_device *dev = NULL; int intf_num = 0; - buf = ioremap(base, len); - if(buf==NULL) - return -1; - - data = buf; - - while(i<num && (data - buf) < len) - { - dm=(dmi_header_t __iomem *)data; - - if((data-buf+readb(&dm->length)) >= len) - break; - - if (readb(&dm->type) == 38) { - if (decode_dmi(dm, intf_num) == 0) { - intf_num++; - if (intf_num >= SI_MAX_DRIVERS) - break; - } - } - - data+=readb(&dm->length); - while((data-buf) < len && (readb(data)||readb(data+1))) - data++; - data+=2; - i++; - } - iounmap(buf); - - return status; -} - -static inline int dmi_checksum(u8 *buf) -{ - u8 sum=0; - int a; - - for(a=0; a<15; a++) - sum+=buf[a]; - return (sum==0); -} - -static int dmi_decode(void) -{ - u8 buf[15]; - u32 fp=0xF0000; - -#ifdef CONFIG_SIMNOW - return -1; -#endif - - while(fp < 0xFFFFF) - { - isa_memcpy_fromio(buf, fp, 15); - if(memcmp(buf, "_DMI_", 5)==0 && dmi_checksum(buf)) - { - u16 num=buf[13]<<8|buf[12]; - u16 len=buf[7]<<8|buf[6]; - u32 base=buf[11]<<24|buf[10]<<16|buf[9]<<8|buf[8]; + while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) { + if (intf_num >= SI_MAX_DRIVERS) + break; - if(dmi_table(base, len, num) == 0) - return 0; - } - fp+=16; + decode_dmi((struct dmi_header *) dev->device_data, intf_num++); } - - return -1; } static int try_init_smbios(int intf_num, struct smi_info **new_info) { - struct smi_info *info; - dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; - char *io_type; + struct smi_info *info; + dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; + char *io_type; if (intf_num >= dmi_data_entries) return -ENODEV; - switch(ipmi_data->type) { + switch (ipmi_data->type) { case 0x01: /* KCS */ si_type[intf_num] = "kcs"; break; @@ -1787,7 +1751,7 @@ static int try_init_smbios(int intf_num, struct smi_info **new_info) } info = kmalloc(sizeof(*info), GFP_KERNEL); - if (!info) { + if (! info) { printk(KERN_ERR "ipmi_si: Could not allocate SI data (4)\n"); return -ENOMEM; } @@ -1811,7 +1775,7 @@ static int try_init_smbios(int intf_num, struct smi_info **new_info) regspacings[intf_num] = ipmi_data->offset; info->io.regspacing = regspacings[intf_num]; - if (!info->io.regspacing) + if (! info->io.regspacing) info->io.regspacing = DEFAULT_REGSPACING; info->io.regsize = DEFAULT_REGSPACING; info->io.regshift = regshifts[intf_num]; @@ -1853,14 +1817,14 @@ static int find_pci_smic(int intf_num, struct smi_info **new_info) pci_smic_checked = 1; - if ((pci_dev = pci_get_device(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID, - NULL))) - ; - else if ((pci_dev = pci_get_class(PCI_ERMC_CLASSCODE, NULL)) && - pci_dev->subsystem_vendor == PCI_HP_VENDOR_ID) - fe_rmc = 1; - else - return -ENODEV; + pci_dev = pci_get_device(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID, NULL); + if (! pci_dev) { + pci_dev = pci_get_class(PCI_ERMC_CLASSCODE, NULL); + if (pci_dev && (pci_dev->subsystem_vendor == PCI_HP_VENDOR_ID)) + fe_rmc = 1; + else + return -ENODEV; + } error = pci_read_config_word(pci_dev, PCI_MMC_ADDR_CW, &base_addr); if (error) @@ -1873,7 +1837,7 @@ static int find_pci_smic(int intf_num, struct smi_info **new_info) } /* Bit 0: 1 specifies programmed I/O, 0 specifies memory mapped I/O */ - if (!(base_addr & 0x0001)) + if (! (base_addr & 0x0001)) { pci_dev_put(pci_dev); printk(KERN_ERR @@ -1883,17 +1847,17 @@ static int find_pci_smic(int intf_num, struct smi_info **new_info) } base_addr &= 0xFFFE; - if (!fe_rmc) + if (! fe_rmc) /* Data register starts at base address + 1 in eRMC */ ++base_addr; - if (!is_new_interface(-1, IPMI_IO_ADDR_SPACE, base_addr)) { + if (! is_new_interface(-1, IPMI_IO_ADDR_SPACE, base_addr)) { pci_dev_put(pci_dev); return -ENODEV; } info = kmalloc(sizeof(*info), GFP_KERNEL); - if (!info) { + if (! info) { pci_dev_put(pci_dev); printk(KERN_ERR "ipmi_si: Could not allocate SI data (5)\n"); return -ENOMEM; @@ -1904,7 +1868,7 @@ static int find_pci_smic(int intf_num, struct smi_info **new_info) ports[intf_num] = base_addr; info->io.info = &(ports[intf_num]); info->io.regspacing = regspacings[intf_num]; - if (!info->io.regspacing) + if (! info->io.regspacing) info->io.regspacing = DEFAULT_REGSPACING; info->io.regsize = DEFAULT_REGSPACING; info->io.regshift = regshifts[intf_num]; @@ -1925,7 +1889,7 @@ static int find_pci_smic(int intf_num, struct smi_info **new_info) static int try_init_plug_and_play(int intf_num, struct smi_info **new_info) { #ifdef CONFIG_PCI - if (find_pci_smic(intf_num, new_info)==0) + if (find_pci_smic(intf_num, new_info) == 0) return 0; #endif /* Include other methods here. */ @@ -1943,7 +1907,7 @@ static int try_get_dev_id(struct smi_info *smi_info) int rv = 0; resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); - if (!resp) + if (! resp) return -ENOMEM; /* Do a Get Device ID command, since it comes back with some @@ -1956,8 +1920,7 @@ static int try_get_dev_id(struct smi_info *smi_info) for (;;) { if (smi_result == SI_SM_CALL_WITH_DELAY) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + schedule_timeout_uninterruptible(1); smi_result = smi_info->handlers->event( smi_info->si_sm, 100); } @@ -1992,11 +1955,8 @@ static int try_get_dev_id(struct smi_info *smi_info) } /* Record info from the get device id, in case we need it. */ - smi_info->ipmi_si_dev_rev = resp[4] & 0xf; - smi_info->ipmi_si_fw_rev_major = resp[5] & 0x7f; - smi_info->ipmi_si_fw_rev_minor = resp[6]; - smi_info->ipmi_version_major = resp[7] & 0xf; - smi_info->ipmi_version_minor = resp[7] >> 4; + memcpy(&smi_info->device_id, &resp[3], + min_t(unsigned long, resp_len-3, sizeof(smi_info->device_id))); out: kfree(resp); @@ -2028,7 +1988,7 @@ static int stat_file_read_proc(char *page, char **start, off_t off, struct smi_info *smi = data; out += sprintf(out, "interrupts_enabled: %d\n", - smi->irq && !smi->interrupt_disabled); + smi->irq && ! smi->interrupt_disabled); out += sprintf(out, "short_timeouts: %ld\n", smi->short_timeouts); out += sprintf(out, "long_timeouts: %ld\n", @@ -2057,6 +2017,73 @@ static int stat_file_read_proc(char *page, char **start, off_t off, return (out - ((char *) page)); } +/* + * oem_data_avail_to_receive_msg_avail + * @info - smi_info structure with msg_flags set + * + * Converts flags from OEM_DATA_AVAIL to RECEIVE_MSG_AVAIL + * Returns 1 indicating need to re-run handle_flags(). + */ +static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info) +{ + smi_info->msg_flags = ((smi_info->msg_flags & ~OEM_DATA_AVAIL) | + RECEIVE_MSG_AVAIL); + return 1; +} + +/* + * setup_dell_poweredge_oem_data_handler + * @info - smi_info.device_id must be populated + * + * Systems that match, but have firmware version < 1.40 may assert + * OEM0_DATA_AVAIL on their own, without being told via Set Flags that + * it's safe to do so. Such systems will de-assert OEM1_DATA_AVAIL + * upon receipt of IPMI_GET_MSG_CMD, so we should treat these flags + * as RECEIVE_MSG_AVAIL instead. + * + * As Dell has no plans to release IPMI 1.5 firmware that *ever* + * assert the OEM[012] bits, and if it did, the driver would have to + * change to handle that properly, we don't actually check for the + * firmware version. + * Device ID = 0x20 BMC on PowerEdge 8G servers + * Device Revision = 0x80 + * Firmware Revision1 = 0x01 BMC version 1.40 + * Firmware Revision2 = 0x40 BCD encoded + * IPMI Version = 0x51 IPMI 1.5 + * Manufacturer ID = A2 02 00 Dell IANA + * + */ +#define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20 +#define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80 +#define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51 +#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} +static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info) +{ + struct ipmi_device_id *id = &smi_info->device_id; + const char mfr[3]=DELL_IANA_MFR_ID; + if (! memcmp(mfr, id->manufacturer_id, sizeof(mfr)) + && (id->device_id == DELL_POWEREDGE_8G_BMC_DEVICE_ID) + && (id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV) + && (id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION)) + { + smi_info->oem_data_avail_handler = + oem_data_avail_to_receive_msg_avail; + } +} + +/* + * setup_oem_data_handler + * @info - smi_info.device_id must be filled in already + * + * Fills in smi_info.device_id.oem_data_available_handler + * when we know what function to use there. + */ + +static void setup_oem_data_handler(struct smi_info *smi_info) +{ + setup_dell_poweredge_oem_data_handler(smi_info); +} + /* Returns 0 if initialized, or negative on an error. */ static int init_one_smi(int intf_num, struct smi_info **smi) { @@ -2067,20 +2094,16 @@ static int init_one_smi(int intf_num, struct smi_info **smi) rv = try_init_mem(intf_num, &new_smi); if (rv) rv = try_init_port(intf_num, &new_smi); -#ifdef CONFIG_ACPI_INTERPRETER - if ((rv) && (si_trydefaults)) { +#ifdef CONFIG_ACPI + if (rv && si_trydefaults) rv = try_init_acpi(intf_num, &new_smi); - } #endif #ifdef CONFIG_X86 - if ((rv) && (si_trydefaults)) { + if (rv && si_trydefaults) rv = try_init_smbios(intf_num, &new_smi); - } #endif - if ((rv) && (si_trydefaults)) { + if (rv && si_trydefaults) rv = try_init_plug_and_play(intf_num, &new_smi); - } - if (rv) return rv; @@ -2090,7 +2113,7 @@ static int init_one_smi(int intf_num, struct smi_info **smi) new_smi->si_sm = NULL; new_smi->handlers = NULL; - if (!new_smi->irq_setup) { + if (! new_smi->irq_setup) { new_smi->irq = irqs[intf_num]; new_smi->irq_setup = std_irq_setup; new_smi->irq_cleanup = std_irq_cleanup; @@ -2124,7 +2147,7 @@ static int init_one_smi(int intf_num, struct smi_info **smi) /* Allocate the state machine's data and initialize it. */ new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL); - if (!new_smi->si_sm) { + if (! new_smi->si_sm) { printk(" Could not allocate state machine memory\n"); rv = -ENOMEM; goto out_err; @@ -2155,6 +2178,8 @@ static int init_one_smi(int intf_num, struct smi_info **smi) if (rv) goto out_err; + setup_oem_data_handler(new_smi); + /* Try to claim any interrupts. */ new_smi->irq_setup(new_smi); @@ -2188,8 +2213,8 @@ static int init_one_smi(int intf_num, struct smi_info **smi) rv = ipmi_register_smi(&handlers, new_smi, - new_smi->ipmi_version_major, - new_smi->ipmi_version_minor, + ipmi_version_major(&new_smi->device_id), + ipmi_version_minor(&new_smi->device_id), new_smi->slave_addr, &(new_smi->intf)); if (rv) { @@ -2230,10 +2255,8 @@ static int init_one_smi(int intf_num, struct smi_info **smi) /* Wait for the timer to stop. This avoids problems with race conditions removing the timer here. */ - while (!new_smi->timer_stopped) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); - } + while (!new_smi->timer_stopped) + schedule_timeout_uninterruptible(1); out_err: if (new_smi->intf) @@ -2270,7 +2293,7 @@ static __init int init_ipmi_si(void) /* Parse out the si_type string into its components. */ str = si_type_str; if (*str != '\0') { - for (i=0; (i<SI_MAX_PARMS) && (*str != '\0'); i++) { + for (i = 0; (i < SI_MAX_PARMS) && (*str != '\0'); i++) { si_type[i] = str; str = strchr(str, ','); if (str) { @@ -2282,22 +2305,14 @@ static __init int init_ipmi_si(void) } } - printk(KERN_INFO "IPMI System Interface driver version " - IPMI_SI_VERSION); - if (kcs_smi_handlers.version) - printk(", KCS version %s", kcs_smi_handlers.version); - if (smic_smi_handlers.version) - printk(", SMIC version %s", smic_smi_handlers.version); - if (bt_smi_handlers.version) - printk(", BT version %s", bt_smi_handlers.version); - printk("\n"); + printk(KERN_INFO "IPMI System Interface driver.\n"); #ifdef CONFIG_X86 - dmi_decode(); + dmi_find_bmc(); #endif rv = init_one_smi(0, &(smi_infos[pos])); - if (rv && !ports[0] && si_trydefaults) { + if (rv && ! ports[0] && si_trydefaults) { /* If we are trying defaults and the initial port is not set, then set it. */ si_type[0] = "kcs"; @@ -2319,7 +2334,7 @@ static __init int init_ipmi_si(void) if (rv == 0) pos++; - for (i=1; i < SI_MAX_PARMS; i++) { + for (i = 1; i < SI_MAX_PARMS; i++) { rv = init_one_smi(i, &(smi_infos[pos])); if (rv == 0) pos++; @@ -2361,17 +2376,14 @@ static void __exit cleanup_one_si(struct smi_info *to_clean) /* Wait for the timer to stop. This avoids problems with race conditions removing the timer here. */ - while (!to_clean->timer_stopped) { - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); - } + while (!to_clean->timer_stopped) + schedule_timeout_uninterruptible(1); /* Interrupts and timeouts are stopped, now make sure the interface is in a clean state. */ - while ((to_clean->curr_msg) || (to_clean->si_state != SI_NORMAL)) { + while (to_clean->curr_msg || (to_clean->si_state != SI_NORMAL)) { poll(to_clean); - set_current_state(TASK_UNINTERRUPTIBLE); - schedule_timeout(1); + schedule_timeout_uninterruptible(1); } rv = ipmi_unregister_smi(to_clean->intf); @@ -2392,13 +2404,15 @@ static __exit void cleanup_ipmi_si(void) { int i; - if (!initialized) + if (! initialized) return; - for (i=0; i<SI_MAX_DRIVERS; i++) { + for (i = 0; i < SI_MAX_DRIVERS; i++) { cleanup_one_si(smi_infos[i]); } } module_exit(cleanup_ipmi_si); MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Corey Minyard <minyard@mvista.com>"); +MODULE_DESCRIPTION("Interface to the IPMI driver for the KCS, SMIC, and BT system interfaces."); |