diff options
Diffstat (limited to 'drivers/char/ipmi/ipmi_si_intf.c')
| -rw-r--r-- | drivers/char/ipmi/ipmi_si_intf.c | 1117 |
1 files changed, 610 insertions, 507 deletions
diff --git a/drivers/char/ipmi/ipmi_si_intf.c b/drivers/char/ipmi/ipmi_si_intf.c index e59b638766ef..a86c0f29953e 100644 --- a/drivers/char/ipmi/ipmi_si_intf.c +++ b/drivers/char/ipmi/ipmi_si_intf.c @@ -52,6 +52,7 @@ #include <linux/pci.h> #include <linux/ioport.h> #include <linux/notifier.h> +#include <linux/mutex.h> #include <linux/kthread.h> #include <asm/irq.h> #ifdef CONFIG_HIGH_RES_TIMERS @@ -109,21 +110,15 @@ enum si_intf_state { enum si_type { SI_KCS, SI_SMIC, SI_BT }; +static char *si_to_str[] = { "KCS", "SMIC", "BT" }; -struct ipmi_device_id { - unsigned char device_id; - unsigned char device_revision; - unsigned char firmware_revision_1; - unsigned char firmware_revision_2; - unsigned char ipmi_version; - unsigned char additional_device_support; - unsigned char manufacturer_id[3]; - unsigned char product_id[2]; - unsigned char aux_firmware_revision[4]; -} __attribute__((packed)); - -#define ipmi_version_major(v) ((v)->ipmi_version & 0xf) -#define ipmi_version_minor(v) ((v)->ipmi_version >> 4) +#define DEVICE_NAME "ipmi_si" + +static struct device_driver ipmi_driver = +{ + .name = DEVICE_NAME, + .bus = &platform_bus_type +}; struct smi_info { @@ -147,6 +142,9 @@ struct smi_info int (*irq_setup)(struct smi_info *info); void (*irq_cleanup)(struct smi_info *info); unsigned int io_size; + char *addr_source; /* ACPI, PCI, SMBIOS, hardcode, default. */ + void (*addr_source_cleanup)(struct smi_info *info); + void *addr_source_data; /* Per-OEM handler, called from handle_flags(). Returns 1 when handle_flags() needs to be re-run @@ -203,8 +201,17 @@ struct smi_info interrupts. */ int interrupt_disabled; + /* From the get device id response... */ struct ipmi_device_id device_id; + /* Driver model stuff. */ + struct device *dev; + struct platform_device *pdev; + + /* True if we allocated the device, false if it came from + * someplace else (like PCI). */ + int dev_registered; + /* Slave address, could be reported from DMI. */ unsigned char slave_addr; @@ -224,12 +231,16 @@ struct smi_info unsigned long incoming_messages; struct task_struct *thread; + + struct list_head link; }; -static struct notifier_block *xaction_notifier_list; +static int try_smi_init(struct smi_info *smi); + +static ATOMIC_NOTIFIER_HEAD(xaction_notifier_list); static int register_xaction_notifier(struct notifier_block * nb) { - return notifier_chain_register(&xaction_notifier_list, nb); + return atomic_notifier_chain_register(&xaction_notifier_list, nb); } static void si_restart_short_timer(struct smi_info *smi_info); @@ -271,13 +282,13 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) spin_lock(&(smi_info->msg_lock)); /* Pick the high priority queue first. */ - if (! list_empty(&(smi_info->hp_xmit_msgs))) { + if (!list_empty(&(smi_info->hp_xmit_msgs))) { entry = smi_info->hp_xmit_msgs.next; - } else if (! list_empty(&(smi_info->xmit_msgs))) { + } else if (!list_empty(&(smi_info->xmit_msgs))) { entry = smi_info->xmit_msgs.next; } - if (! entry) { + if (!entry) { smi_info->curr_msg = NULL; rv = SI_SM_IDLE; } else { @@ -291,7 +302,8 @@ static enum si_sm_result start_next_msg(struct smi_info *smi_info) do_gettimeofday(&t); printk("**Start2: %d.%9.9d\n", t.tv_sec, t.tv_usec); #endif - err = notifier_call_chain(&xaction_notifier_list, 0, smi_info); + err = atomic_notifier_call_chain(&xaction_notifier_list, + 0, smi_info); if (err & NOTIFY_STOP_MASK) { rv = SI_SM_CALL_WITHOUT_DELAY; goto out; @@ -344,7 +356,7 @@ static void start_clear_flags(struct smi_info *smi_info) memory, we will re-enable the interrupt. */ static inline void disable_si_irq(struct smi_info *smi_info) { - if ((smi_info->irq) && (! smi_info->interrupt_disabled)) { + if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { disable_irq_nosync(smi_info->irq); smi_info->interrupt_disabled = 1; } @@ -375,7 +387,7 @@ static void handle_flags(struct smi_info *smi_info) } else if (smi_info->msg_flags & RECEIVE_MSG_AVAIL) { /* Messages available. */ smi_info->curr_msg = ipmi_alloc_smi_msg(); - if (! smi_info->curr_msg) { + if (!smi_info->curr_msg) { disable_si_irq(smi_info); smi_info->si_state = SI_NORMAL; return; @@ -394,7 +406,7 @@ static void handle_flags(struct smi_info *smi_info) } else if (smi_info->msg_flags & EVENT_MSG_BUFFER_FULL) { /* Events available. */ smi_info->curr_msg = ipmi_alloc_smi_msg(); - if (! smi_info->curr_msg) { + if (!smi_info->curr_msg) { disable_si_irq(smi_info); smi_info->si_state = SI_NORMAL; return; @@ -430,7 +442,7 @@ static void handle_transaction_done(struct smi_info *smi_info) #endif switch (smi_info->si_state) { case SI_NORMAL: - if (! smi_info->curr_msg) + if (!smi_info->curr_msg) break; smi_info->curr_msg->rsp_size @@ -791,7 +803,7 @@ static int ipmi_thread(void *data) set_user_nice(current, 19); while (!kthread_should_stop()) { spin_lock_irqsave(&(smi_info->si_lock), flags); - smi_result=smi_event_handler(smi_info, 0); + smi_result = smi_event_handler(smi_info, 0); spin_unlock_irqrestore(&(smi_info->si_lock), flags); if (smi_result == SI_SM_CALL_WITHOUT_DELAY) { /* do nothing */ @@ -880,7 +892,7 @@ static void smi_timeout(unsigned long data) smi_info->last_timeout_jiffies = jiffies_now; - if ((smi_info->irq) && (! smi_info->interrupt_disabled)) { + if ((smi_info->irq) && (!smi_info->interrupt_disabled)) { /* Running with interrupts, only do long timeouts. */ smi_info->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; spin_lock_irqsave(&smi_info->count_lock, flags); @@ -960,10 +972,37 @@ static irqreturn_t si_bt_irq_handler(int irq, void *data, struct pt_regs *regs) return si_irq_handler(irq, data, regs); } +static int smi_start_processing(void *send_info, + ipmi_smi_t intf) +{ + struct smi_info *new_smi = send_info; + + new_smi->intf = intf; + + /* Set up the timer that drives the interface. */ + setup_timer(&new_smi->si_timer, smi_timeout, (long)new_smi); + new_smi->last_timeout_jiffies = jiffies; + mod_timer(&new_smi->si_timer, jiffies + SI_TIMEOUT_JIFFIES); + + if (new_smi->si_type != SI_BT) { + new_smi->thread = kthread_run(ipmi_thread, new_smi, + "kipmi%d", new_smi->intf_num); + if (IS_ERR(new_smi->thread)) { + printk(KERN_NOTICE "ipmi_si_intf: Could not start" + " kernel thread due to error %ld, only using" + " timers to drive the interface\n", + PTR_ERR(new_smi->thread)); + new_smi->thread = NULL; + } + } + + return 0; +} static struct ipmi_smi_handlers handlers = { .owner = THIS_MODULE, + .start_processing = smi_start_processing, .sender = sender, .request_events = request_events, .set_run_to_completion = set_run_to_completion, @@ -974,15 +1013,10 @@ static struct ipmi_smi_handlers handlers = a default IO port, and 1 ACPI/SPMI address. That sets SI_MAX_DRIVERS */ #define SI_MAX_PARMS 4 -#define SI_MAX_DRIVERS ((SI_MAX_PARMS * 2) + 2) -static struct smi_info *smi_infos[SI_MAX_DRIVERS] = -{ NULL, NULL, NULL, NULL }; - -#define DEVICE_NAME "ipmi_si" +static LIST_HEAD(smi_infos); +static DEFINE_MUTEX(smi_infos_lock); +static int smi_num; /* Used to sequence the SMIs */ -#define DEFAULT_KCS_IO_PORT 0xca2 -#define DEFAULT_SMIC_IO_PORT 0xca9 -#define DEFAULT_BT_IO_PORT 0xe4 #define DEFAULT_REGSPACING 1 static int si_trydefaults = 1; @@ -1053,38 +1087,23 @@ MODULE_PARM_DESC(slave_addrs, "Set the default IPMB slave address for" " by interface number."); +#define IPMI_IO_ADDR_SPACE 0 #define IPMI_MEM_ADDR_SPACE 1 -#define IPMI_IO_ADDR_SPACE 2 +static char *addr_space_to_str[] = { "I/O", "memory" }; -#if defined(CONFIG_ACPI) || defined(CONFIG_DMI) || defined(CONFIG_PCI) -static int is_new_interface(int intf, u8 addr_space, unsigned long base_addr) +static void std_irq_cleanup(struct smi_info *info) { - int i; - - for (i = 0; i < SI_MAX_PARMS; ++i) { - /* Don't check our address. */ - if (i == intf) - continue; - if (si_type[i] != NULL) { - if ((addr_space == IPMI_MEM_ADDR_SPACE && - base_addr == addrs[i]) || - (addr_space == IPMI_IO_ADDR_SPACE && - base_addr == ports[i])) - return 0; - } - else - break; - } - - return 1; + if (info->si_type == SI_BT) + /* Disable the interrupt in the BT interface. */ + info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0); + free_irq(info->irq, info); } -#endif static int std_irq_setup(struct smi_info *info) { int rv; - if (! info->irq) + if (!info->irq) return 0; if (info->si_type == SI_BT) { @@ -1093,7 +1112,7 @@ static int std_irq_setup(struct smi_info *info) SA_INTERRUPT, DEVICE_NAME, info); - if (! rv) + if (!rv) /* Enable the interrupt in the BT interface. */ info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, IPMI_BT_INTMASK_ENABLE_IRQ_BIT); @@ -1110,88 +1129,77 @@ static int std_irq_setup(struct smi_info *info) DEVICE_NAME, info->irq); info->irq = 0; } else { + info->irq_cleanup = std_irq_cleanup; printk(" Using irq %d\n", info->irq); } return rv; } -static void std_irq_cleanup(struct smi_info *info) -{ - if (! info->irq) - return; - - if (info->si_type == SI_BT) - /* Disable the interrupt in the BT interface. */ - info->io.outputb(&info->io, IPMI_BT_INTMASK_REG, 0); - free_irq(info->irq, info); -} - static unsigned char port_inb(struct si_sm_io *io, unsigned int offset) { - unsigned int *addr = io->info; + unsigned int addr = io->addr_data; - return inb((*addr)+(offset*io->regspacing)); + return inb(addr + (offset * io->regspacing)); } static void port_outb(struct si_sm_io *io, unsigned int offset, unsigned char b) { - unsigned int *addr = io->info; + unsigned int addr = io->addr_data; - outb(b, (*addr)+(offset * io->regspacing)); + outb(b, addr + (offset * io->regspacing)); } static unsigned char port_inw(struct si_sm_io *io, unsigned int offset) { - unsigned int *addr = io->info; + unsigned int addr = io->addr_data; - return (inw((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff; + return (inw(addr + (offset * io->regspacing)) >> io->regshift) & 0xff; } static void port_outw(struct si_sm_io *io, unsigned int offset, unsigned char b) { - unsigned int *addr = io->info; + unsigned int addr = io->addr_data; - outw(b << io->regshift, (*addr)+(offset * io->regspacing)); + outw(b << io->regshift, addr + (offset * io->regspacing)); } static unsigned char port_inl(struct si_sm_io *io, unsigned int offset) { - unsigned int *addr = io->info; + unsigned int addr = io->addr_data; - return (inl((*addr)+(offset * io->regspacing)) >> io->regshift) & 0xff; + return (inl(addr + (offset * io->regspacing)) >> io->regshift) & 0xff; } static void port_outl(struct si_sm_io *io, unsigned int offset, unsigned char b) { - unsigned int *addr = io->info; + unsigned int addr = io->addr_data; - outl(b << io->regshift, (*addr)+(offset * io->regspacing)); + outl(b << io->regshift, addr+(offset * io->regspacing)); } static void port_cleanup(struct smi_info *info) { - unsigned int *addr = info->io.info; - int mapsize; + unsigned int addr = info->io.addr_data; + int mapsize; - if (addr && (*addr)) { + if (addr) { mapsize = ((info->io_size * info->io.regspacing) - (info->io.regspacing - info->io.regsize)); - release_region (*addr, mapsize); + release_region (addr, mapsize); } - kfree(info); } static int port_setup(struct smi_info *info) { - unsigned int *addr = info->io.info; - int mapsize; + unsigned int addr = info->io.addr_data; + int mapsize; - if (! addr || (! *addr)) + if (!addr) return -ENODEV; info->io_cleanup = port_cleanup; @@ -1225,51 +1233,11 @@ static int port_setup(struct smi_info *info) mapsize = ((info->io_size * info->io.regspacing) - (info->io.regspacing - info->io.regsize)); - if (request_region(*addr, mapsize, DEVICE_NAME) == NULL) + if (request_region(addr, mapsize, DEVICE_NAME) == NULL) return -EIO; return 0; } -static int try_init_port(int intf_num, struct smi_info **new_info) -{ - struct smi_info *info; - - if (! ports[intf_num]) - return -ENODEV; - - if (! is_new_interface(intf_num, IPMI_IO_ADDR_SPACE, - ports[intf_num])) - return -ENODEV; - - info = kmalloc(sizeof(*info), GFP_KERNEL); - if (! info) { - printk(KERN_ERR "ipmi_si: Could not allocate SI data (1)\n"); - return -ENOMEM; - } - memset(info, 0, sizeof(*info)); - - info->io_setup = port_setup; - info->io.info = &(ports[intf_num]); - info->io.addr = NULL; - info->io.regspacing = regspacings[intf_num]; - if (! info->io.regspacing) - info->io.regspacing = DEFAULT_REGSPACING; - info->io.regsize = regsizes[intf_num]; - if (! info->io.regsize) - info->io.regsize = DEFAULT_REGSPACING; - info->io.regshift = regshifts[intf_num]; - info->irq = 0; - info->irq_setup = NULL; - *new_info = info; - - if (si_type[intf_num] == NULL) - si_type[intf_num] = "kcs"; - - printk("ipmi_si: Trying \"%s\" at I/O port 0x%x\n", - si_type[intf_num], ports[intf_num]); - return 0; -} - static unsigned char intf_mem_inb(struct si_sm_io *io, unsigned int offset) { return readb((io->addr)+(offset * io->regspacing)); @@ -1321,7 +1289,7 @@ static void mem_outq(struct si_sm_io *io, unsigned int offset, static void mem_cleanup(struct smi_info *info) { - unsigned long *addr = info->io.info; + unsigned long addr = info->io.addr_data; int mapsize; if (info->io.addr) { @@ -1330,17 +1298,16 @@ static void mem_cleanup(struct smi_info *info) mapsize = ((info->io_size * info->io.regspacing) - (info->io.regspacing - info->io.regsize)); - release_mem_region(*addr, mapsize); + release_mem_region(addr, mapsize); } - kfree(info); } static int mem_setup(struct smi_info *info) { - unsigned long *addr = info->io.info; + unsigned long addr = info->io.addr_data; int mapsize; - if (! addr || (! *addr)) + if (!addr) return -ENODEV; info->io_cleanup = mem_cleanup; @@ -1380,58 +1347,84 @@ static int mem_setup(struct smi_info *info) mapsize = ((info->io_size * info->io.regspacing) - (info->io.regspacing - info->io.regsize)); - if (request_mem_region(*addr, mapsize, DEVICE_NAME) == NULL) + if (request_mem_region(addr, mapsize, DEVICE_NAME) == NULL) return -EIO; - info->io.addr = ioremap(*addr, mapsize); + info->io.addr = ioremap(addr, mapsize); if (info->io.addr == NULL) { - release_mem_region(*addr, mapsize); + release_mem_region(addr, mapsize); return -EIO; } return 0; } -static int try_init_mem(int intf_num, struct smi_info **new_info) + +static __devinit void hardcode_find_bmc(void) { + int i; struct smi_info *info; - if (! addrs[intf_num]) - return -ENODEV; + for (i = 0; i < SI_MAX_PARMS; i++) { + if (!ports[i] && !addrs[i]) + continue; - if (! is_new_interface(intf_num, IPMI_MEM_ADDR_SPACE, - addrs[intf_num])) - return -ENODEV; + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return; - info = kmalloc(sizeof(*info), GFP_KERNEL); - if (! info) { - printk(KERN_ERR "ipmi_si: Could not allocate SI data (2)\n"); - return -ENOMEM; - } - memset(info, 0, sizeof(*info)); + info->addr_source = "hardcoded"; - info->io_setup = mem_setup; - info->io.info = &addrs[intf_num]; - info->io.addr = NULL; - info->io.regspacing = regspacings[intf_num]; - if (! info->io.regspacing) - info->io.regspacing = DEFAULT_REGSPACING; - info->io.regsize = regsizes[intf_num]; - if (! info->io.regsize) - info->io.regsize = DEFAULT_REGSPACING; - info->io.regshift = regshifts[intf_num]; - info->irq = 0; - info->irq_setup = NULL; - *new_info = info; + if (!si_type[i] || strcmp(si_type[i], "kcs") == 0) { + info->si_type = SI_KCS; + } else if (strcmp(si_type[i], "smic") == 0) { + info->si_type = SI_SMIC; + } else if (strcmp(si_type[i], "bt") == 0) { + info->si_type = SI_BT; + } else { + printk(KERN_WARNING + "ipmi_si: Interface type specified " + "for interface %d, was invalid: %s\n", + i, si_type[i]); + kfree(info); + continue; + } + + if (ports[i]) { + /* An I/O port */ + info->io_setup = port_setup; + info->io.addr_data = ports[i]; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + } else if (addrs[i]) { + /* A memory port */ + info->io_setup = mem_setup; + info->io.addr_data = addrs[i]; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + } else { + printk(KERN_WARNING + "ipmi_si: Interface type specified " + "for interface %d, " + "but port and address were not set or " + "set to zero.\n", i); + kfree(info); + continue; + } - if (si_type[intf_num] == NULL) - si_type[intf_num] = "kcs"; + info->io.addr = NULL; + info->io.regspacing = regspacings[i]; + if (!info->io.regspacing) + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = regsizes[i]; + if (!info->io.regsize) + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = regshifts[i]; + info->irq = irqs[i]; + if (info->irq) + info->irq_setup = std_irq_setup; - printk("ipmi_si: Trying \"%s\" at memory address 0x%lx\n", - si_type[intf_num], addrs[intf_num]); - return 0; + try_smi_init(info); + } } - #ifdef CONFIG_ACPI #include <linux/acpi.h> @@ -1470,11 +1463,19 @@ static u32 ipmi_acpi_gpe(void *context) return ACPI_INTERRUPT_HANDLED; } +static void acpi_gpe_irq_cleanup(struct smi_info *info) +{ + if (!info->irq) + return; + + acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe); +} + static int acpi_gpe_irq_setup(struct smi_info *info) { acpi_status status; - if (! info->irq) + if (!info->irq) return 0; /* FIXME - is level triggered right? */ @@ -1491,19 +1492,12 @@ static int acpi_gpe_irq_setup(struct smi_info *info) info->irq = 0; return -EINVAL; } else { + info->irq_cleanup = acpi_gpe_irq_cleanup; printk(" Using ACPI GPE %d\n", info->irq); return 0; } } -static void acpi_gpe_irq_cleanup(struct smi_info *info) -{ - if (! info->irq) - return; - - acpi_remove_gpe_handler(NULL, info->irq, &ipmi_acpi_gpe); -} - /* * Defined at * http://h21007.www2.hp.com/dspp/files/unprotected/devresource/Docs/TechPapers/IA64/hpspmi.pdf @@ -1546,28 +1540,12 @@ struct SPMITable { s8 spmi_id[1]; /* A '\0' terminated array starts here. */ }; -static int try_init_acpi(int intf_num, struct smi_info **new_info) +static __devinit int try_init_acpi(struct SPMITable *spmi) { struct smi_info *info; - acpi_status status; - struct SPMITable *spmi; char *io_type; u8 addr_space; - if (acpi_disabled) - return -ENODEV; - - if (acpi_failure) - return -ENODEV; - - status = acpi_get_firmware_table("SPMI", intf_num+1, - ACPI_LOGICAL_ADDRESSING, - (struct acpi_table_header **) &spmi); - if (status != AE_OK) { - acpi_failure = 1; - return -ENODEV; - } - if (spmi->IPMIlegacy != 1) { printk(KERN_INFO "IPMI: Bad SPMI legacy %d\n", spmi->IPMIlegacy); return -ENODEV; @@ -1577,47 +1555,42 @@ static int try_init_acpi(int intf_num, struct smi_info **new_info) addr_space = IPMI_MEM_ADDR_SPACE; else addr_space = IPMI_IO_ADDR_SPACE; - if (! is_new_interface(-1, addr_space, spmi->addr.address)) - return -ENODEV; + + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n"); + return -ENOMEM; + } + + info->addr_source = "ACPI"; /* Figure out the interface type. */ switch (spmi->InterfaceType) { case 1: /* KCS */ - si_type[intf_num] = "kcs"; + info->si_type = SI_KCS; break; - case 2: /* SMIC */ - si_type[intf_num] = "smic"; + info->si_type = SI_SMIC; break; - case 3: /* BT */ - si_type[intf_num] = "bt"; + info->si_type = SI_BT; break; - default: printk(KERN_INFO "ipmi_si: Unknown ACPI/SPMI SI type %d\n", spmi->InterfaceType); + kfree(info); return -EIO; } - info = kmalloc(sizeof(*info), GFP_KERNEL); - if (! info) { - printk(KERN_ERR "ipmi_si: Could not allocate SI data (3)\n"); - return -ENOMEM; - } - memset(info, 0, sizeof(*info)); - if (spmi->InterruptType & 1) { /* We've got a GPE interrupt. */ info->irq = spmi->GPE; info->irq_setup = acpi_gpe_irq_setup; - info->irq_cleanup = acpi_gpe_irq_cleanup; } else if (spmi->InterruptType & 2) { /* We've got an APIC/SAPIC interrupt. */ info->irq = spmi->GlobalSystemInterrupt; info->irq_setup = std_irq_setup; - info->irq_cleanup = std_irq_cleanup; } else { /* Use the default interrupt setting. */ info->irq = 0; @@ -1626,43 +1599,60 @@ static int try_init_acpi(int intf_num, struct smi_info **new_info) if (spmi->addr.register_bit_width) { /* A (hopefully) properly formed register bit width. */ - regspacings[intf_num] = spmi->addr.register_bit_width / 8; info->io.regspacing = spmi->addr.register_bit_width / 8; } else { - regspacings[intf_num] = DEFAULT_REGSPACING; info->io.regspacing = DEFAULT_REGSPACING; } - regsizes[intf_num] = regspacings[intf_num]; - info->io.regsize = regsizes[intf_num]; - regshifts[intf_num] = spmi->addr.register_bit_offset; - info->io.regshift = regshifts[intf_num]; + info->io.regsize = info->io.regspacing; + info->io.regshift = spmi->addr.register_bit_offset; if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_MEMORY) { io_type = "memory"; info->io_setup = mem_setup; - addrs[intf_num] = spmi->addr.address; - info->io.info = &(addrs[intf_num]); + info->io.addr_type = IPMI_IO_ADDR_SPACE; } else if (spmi->addr.address_space_id == ACPI_ADR_SPACE_SYSTEM_IO) { io_type = "I/O"; info->io_setup = port_setup; - ports[intf_num] = spmi->addr.address; - info->io.info = &(ports[intf_num]); + info->io.addr_type = IPMI_MEM_ADDR_SPACE; } else { kfree(info); printk("ipmi_si: Unknown ACPI I/O Address type\n"); return -EIO; } + info->io.addr_data = spmi->addr.address; - *new_info = info; + try_smi_init(info); - printk("ipmi_si: ACPI/SPMI specifies \"%s\" %s SI @ 0x%lx\n", - si_type[intf_num], io_type, (unsigned long) spmi->addr.address); return 0; } + +static __devinit void acpi_find_bmc(void) +{ + acpi_status status; + struct SPMITable *spmi; + int i; + + if (acpi_disabled) + return; + + if (acpi_failure) + return; + + for (i = 0; ; i++) { + status = acpi_get_firmware_table("SPMI", i+1, + ACPI_LOGICAL_ADDRESSING, + (struct acpi_table_header **) + &spmi); + if (status != AE_OK) + return; + + try_init_acpi(spmi); + } +} #endif #ifdef CONFIG_DMI -typedef struct dmi_ipmi_data +struct dmi_ipmi_data { u8 type; u8 addr_space; @@ -1670,49 +1660,46 @@ typedef struct dmi_ipmi_data u8 irq; u8 offset; u8 slave_addr; -} dmi_ipmi_data_t; - -static dmi_ipmi_data_t dmi_data[SI_MAX_DRIVERS]; -static int dmi_data_entries; +}; -static int __init decode_dmi(struct dmi_header *dm, int intf_num) +static int __devinit decode_dmi(struct dmi_header *dm, + struct dmi_ipmi_data *dmi) { u8 *data = (u8 *)dm; unsigned long base_addr; u8 reg_spacing; u8 len = dm->length; - dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; - ipmi_data->type = data[4]; + dmi->type = data[4]; memcpy(&base_addr, data+8, sizeof(unsigned long)); if (len >= 0x11) { if (base_addr & 1) { /* I/O */ base_addr &= 0xFFFE; - ipmi_data->addr_space = IPMI_IO_ADDR_SPACE; + dmi->addr_space = IPMI_IO_ADDR_SPACE; } else { /* Memory */ - ipmi_data->addr_space = IPMI_MEM_ADDR_SPACE; + dmi->addr_space = IPMI_MEM_ADDR_SPACE; } /* If bit 4 of byte 0x10 is set, then the lsb for the address is odd. */ - ipmi_data->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); + dmi->base_addr = base_addr | ((data[0x10] & 0x10) >> 4); - ipmi_data->irq = data[0x11]; + dmi->irq = data[0x11]; /* The top two bits of byte 0x10 hold the register spacing. */ reg_spacing = (data[0x10] & 0xC0) >> 6; switch(reg_spacing){ case 0x00: /* Byte boundaries */ - ipmi_data->offset = 1; + dmi->offset = 1; break; case 0x01: /* 32-bit boundaries */ - ipmi_data->offset = 4; + dmi->offset = 4; break; case 0x02: /* 16-byte boundaries */ - ipmi_data->offset = 16; + dmi->offset = 16; break; default: /* Some other interface, just ignore it. */ @@ -1726,217 +1713,227 @@ static int __init decode_dmi(struct dmi_header *dm, int intf_num) * wrong (and all that I have seen are I/O) so we just * ignore that bit and assume I/O. Systems that use * memory should use the newer spec, anyway. */ - ipmi_data->base_addr = base_addr & 0xfffe; - ipmi_data->addr_space = IPMI_IO_ADDR_SPACE; - ipmi_data->offset = 1; + dmi->base_addr = base_addr & 0xfffe; + dmi->addr_space = IPMI_IO_ADDR_SPACE; + dmi->offset = 1; } - ipmi_data->slave_addr = data[6]; + dmi->slave_addr = data[6]; - if (is_new_interface(-1, ipmi_data->addr_space,ipmi_data->base_addr)) { - dmi_data_entries++; - return 0; - } - - memset(ipmi_data, 0, sizeof(dmi_ipmi_data_t)); - - return -1; + return 0; } -static void __init dmi_find_bmc(void) +static __devinit void try_init_dmi(struct dmi_ipmi_data *ipmi_data) { - struct dmi_device *dev = NULL; - int intf_num = 0; - - while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) { - if (intf_num >= SI_MAX_DRIVERS) - break; + struct smi_info *info; - decode_dmi((struct dmi_header *) dev->device_data, intf_num++); + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) { + printk(KERN_ERR + "ipmi_si: Could not allocate SI data\n"); + return; } -} -static int try_init_smbios(int intf_num, struct smi_info **new_info) -{ - struct smi_info *info; - dmi_ipmi_data_t *ipmi_data = dmi_data+intf_num; - char *io_type; - - if (intf_num >= dmi_data_entries) - return -ENODEV; + info->addr_source = "SMBIOS"; switch (ipmi_data->type) { - case 0x01: /* KCS */ - si_type[intf_num] = "kcs"; - break; - case 0x02: /* SMIC */ - si_type[intf_num] = "smic"; - break; - case 0x03: /* BT */ - si_type[intf_num] = "bt"; - break; - default: - return -EIO; - } - - info = kmalloc(sizeof(*info), GFP_KERNEL); - if (! info) { - printk(KERN_ERR "ipmi_si: Could not allocate SI data (4)\n"); - return -ENOMEM; + case 0x01: /* KCS */ + info->si_type = SI_KCS; + break; + case 0x02: /* SMIC */ + info->si_type = SI_SMIC; + break; + case 0x03: /* BT */ + info->si_type = SI_BT; + break; + default: + return; } - memset(info, 0, sizeof(*info)); - if (ipmi_data->addr_space == 1) { - io_type = "memory"; + switch (ipmi_data->addr_space) { + case IPMI_MEM_ADDR_SPACE: info->io_setup = mem_setup; - addrs[intf_num] = ipmi_data->base_addr; - info->io.info = &(addrs[intf_num]); - } else if (ipmi_data->addr_space == 2) { - io_type = "I/O"; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; + break; + + case IPMI_IO_ADDR_SPACE: info->io_setup = port_setup; - ports[intf_num] = ipmi_data->base_addr; - info->io.info = &(ports[intf_num]); - } else { + info->io.addr_type = IPMI_IO_ADDR_SPACE; + break; + + default: kfree(info); - printk("ipmi_si: Unknown SMBIOS I/O Address type.\n"); - return -EIO; + printk(KERN_WARNING + "ipmi_si: Unknown SMBIOS I/O Address type: %d.\n", + ipmi_data->addr_space); + return; } + info->io.addr_data = ipmi_data->base_addr; - regspacings[intf_num] = ipmi_data->offset; - info->io.regspacing = regspacings[intf_num]; - if (! info->io.regspacing) + info->io.regspacing = ipmi_data->offset; + if (!info->io.regspacing) info->io.regspacing = DEFAULT_REGSPACING; info->io.regsize = DEFAULT_REGSPACING; - info->io.regshift = regshifts[intf_num]; + info->io.regshift = 0; info->slave_addr = ipmi_data->slave_addr; - irqs[intf_num] = ipmi_data->irq; + info->irq = ipmi_data->irq; + if (info->irq) + info->irq_setup = std_irq_setup; - *new_info = info; + try_smi_init(info); +} - printk("ipmi_si: Found SMBIOS-specified state machine at %s" - " address 0x%lx, slave address 0x%x\n", - io_type, (unsigned long)ipmi_data->base_addr, - ipmi_data->slave_addr); - return 0; +static void __devinit dmi_find_bmc(void) +{ + struct dmi_device *dev = NULL; + struct dmi_ipmi_data data; + int rv; + + while ((dev = dmi_find_device(DMI_DEV_TYPE_IPMI, NULL, dev))) { + rv = decode_dmi((struct dmi_header *) dev->device_data, &data); + if (!rv) + try_init_dmi(&data); + } } #endif /* CONFIG_DMI */ #ifdef CONFIG_PCI -#define PCI_ERMC_CLASSCODE 0x0C0700 +#define PCI_ERMC_CLASSCODE 0x0C0700 +#define PCI_ERMC_CLASSCODE_MASK 0xffffff00 +#define PCI_ERMC_CLASSCODE_TYPE_MASK 0xff +#define PCI_ERMC_CLASSCODE_TYPE_SMIC 0x00 +#define PCI_ERMC_CLASSCODE_TYPE_KCS 0x01 +#define PCI_ERMC_CLASSCODE_TYPE_BT 0x02 + #define PCI_HP_VENDOR_ID 0x103C #define PCI_MMC_DEVICE_ID 0x121A #define PCI_MMC_ADDR_CW 0x10 -/* Avoid more than one attempt to probe pci smic. */ -static int pci_smic_checked = 0; +static void ipmi_pci_cleanup(struct smi_info *info) +{ + struct pci_dev *pdev = info->addr_source_data; -static int find_pci_smic(int intf_num, struct smi_info **new_info) + pci_disable_device(pdev); +} + +static int __devinit ipmi_pci_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) { - struct smi_info *info; - int error; - struct pci_dev *pci_dev = NULL; - u16 base_addr; - int fe_rmc = 0; + int rv; + int class_type = pdev->class & PCI_ERMC_CLASSCODE_TYPE_MASK; + struct smi_info *info; + int first_reg_offset = 0; - if (pci_smic_checked) - return -ENODEV; + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return ENOMEM; - pci_smic_checked = 1; + info->addr_source = "PCI"; - pci_dev = pci_get_device(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID, NULL); - if (! pci_dev) { - pci_dev = pci_get_class(PCI_ERMC_CLASSCODE, NULL); - if (pci_dev && (pci_dev->subsystem_vendor == PCI_HP_VENDOR_ID)) - fe_rmc = 1; - else - return -ENODEV; - } + switch (class_type) { + case PCI_ERMC_CLASSCODE_TYPE_SMIC: + info->si_type = SI_SMIC; + break; - error = pci_read_config_word(pci_dev, PCI_MMC_ADDR_CW, &base_addr); - if (error) - { - pci_dev_put(pci_dev); - printk(KERN_ERR - "ipmi_si: pci_read_config_word() failed (%d).\n", - error); - return -ENODEV; + case PCI_ERMC_CLASSCODE_TYPE_KCS: + info->si_type = SI_KCS; + break; + + case PCI_ERMC_CLASSCODE_TYPE_BT: + info->si_type = SI_BT; + break; + + default: + kfree(info); + printk(KERN_INFO "ipmi_si: %s: Unknown IPMI type: %d\n", + pci_name(pdev), class_type); + return ENOMEM; } - /* Bit 0: 1 specifies programmed I/O, 0 specifies memory mapped I/O */ - if (! (base_addr & 0x0001)) - { - pci_dev_put(pci_dev); - printk(KERN_ERR - "ipmi_si: memory mapped I/O not supported for PCI" - " smic.\n"); - return -ENODEV; + rv = pci_enable_device(pdev); + if (rv) { + printk(KERN_ERR "ipmi_si: %s: couldn't enable PCI device\n", + pci_name(pdev)); + kfree(info); + return rv; } - base_addr &= 0xFFFE; - if (! fe_rmc) - /* Data register starts at base address + 1 in eRMC */ - ++base_addr; + info->addr_source_cleanup = ipmi_pci_cleanup; + info->addr_source_data = pdev; - if (! is_new_interface(-1, IPMI_IO_ADDR_SPACE, base_addr)) { - pci_dev_put(pci_dev); - return -ENODEV; - } + if (pdev->subsystem_vendor == PCI_HP_VENDOR_ID) + first_reg_offset = 1; - info = kmalloc(sizeof(*info), GFP_KERNEL); - if (! info) { - pci_dev_put(pci_dev); - printk(KERN_ERR "ipmi_si: Could not allocate SI data (5)\n"); - return -ENOMEM; + if (pci_resource_flags(pdev, 0) & IORESOURCE_IO) { + info->io_setup = port_setup; + info->io.addr_type = IPMI_IO_ADDR_SPACE; + } else { + info->io_setup = mem_setup; + info->io.addr_type = IPMI_MEM_ADDR_SPACE; } - memset(info, 0, sizeof(*info)); + info->io.addr_data = pci_resource_start(pdev, 0); - info->io_setup = port_setup; - ports[intf_num] = base_addr; - info->io.info = &(ports[intf_num]); - info->io.regspacing = regspacings[intf_num]; - if (! info->io.regspacing) - info->io.regspacing = DEFAULT_REGSPACING; + info->io.regspacing = DEFAULT_REGSPACING; info->io.regsize = DEFAULT_REGSPACING; - info->io.regshift = regshifts[intf_num]; + info->io.regshift = 0; + + info->irq = pdev->irq; + if (info->irq) + info->irq_setup = std_irq_setup; - *new_info = info; + info->dev = &pdev->dev; - irqs[intf_num] = pci_dev->irq; - si_type[intf_num] = "smic"; + return try_smi_init(info); +} - printk("ipmi_si: Found PCI SMIC at I/O address 0x%lx\n", - (long unsigned int) base_addr); +static void __devexit ipmi_pci_remove(struct pci_dev *pdev) +{ +} - pci_dev_put(pci_dev); +#ifdef CONFIG_PM +static int ipmi_pci_suspend(struct pci_dev *pdev, pm_message_t state) +{ return 0; } -#endif /* CONFIG_PCI */ -static int try_init_plug_and_play(int intf_num, struct smi_info **new_info) +static int ipmi_pci_resume(struct pci_dev *pdev) { -#ifdef CONFIG_PCI - if (find_pci_smic(intf_num, new_info) == 0) - return 0; + return 0; +} #endif - /* Include other methods here. */ - return -ENODEV; -} +static struct pci_device_id ipmi_pci_devices[] = { + { PCI_DEVICE(PCI_HP_VENDOR_ID, PCI_MMC_DEVICE_ID) }, + { PCI_DEVICE_CLASS(PCI_ERMC_CLASSCODE, PCI_ERMC_CLASSCODE) } +}; +MODULE_DEVICE_TABLE(pci, ipmi_pci_devices); + +static struct pci_driver ipmi_pci_driver = { + .name = DEVICE_NAME, + .id_table = ipmi_pci_devices, + .probe = ipmi_pci_probe, + .remove = __devexit_p(ipmi_pci_remove), +#ifdef CONFIG_PM + .suspend = ipmi_pci_suspend, + .resume = ipmi_pci_resume, +#endif +}; +#endif /* CONFIG_PCI */ static int try_get_dev_id(struct smi_info *smi_info) { - unsigned char msg[2]; - unsigned char *resp; - unsigned long resp_len; - enum si_sm_result smi_result; - int rv = 0; + unsigned char msg[2]; + unsigned char *resp; + unsigned long resp_len; + enum si_sm_result smi_result; + int rv = 0; resp = kmalloc(IPMI_MAX_MSG_LENGTH, GFP_KERNEL); - if (! resp) + if (!resp) return -ENOMEM; /* Do a Get Device ID command, since it comes back with some @@ -1972,7 +1969,7 @@ static int try_get_dev_id(struct smi_info *smi_info) /* Otherwise, we got some data. */ resp_len = smi_info->handlers->get_result(smi_info->si_sm, resp, IPMI_MAX_MSG_LENGTH); - if (resp_len < 6) { + if (resp_len < 14) { /* That's odd, it should be longer. */ rv = -EINVAL; goto out; @@ -1985,8 +1982,7 @@ static int try_get_dev_id(struct smi_info *smi_info) } /* Record info from the get device id, in case we need it. */ - memcpy(&smi_info->device_id, &resp[3], - min_t(unsigned long, resp_len-3, sizeof(smi_info->device_id))); + ipmi_demangle_device_id(resp+3, resp_len-3, &smi_info->device_id); out: kfree(resp); @@ -2018,7 +2014,7 @@ static int stat_file_read_proc(char *page, char **start, off_t off, struct smi_info *smi = data; out += sprintf(out, "interrupts_enabled: %d\n", - smi->irq && ! smi->interrupt_disabled); + smi->irq && !smi->interrupt_disabled); out += sprintf(out, "short_timeouts: %ld\n", smi->short_timeouts); out += sprintf(out, "long_timeouts: %ld\n", @@ -2089,15 +2085,14 @@ static int oem_data_avail_to_receive_msg_avail(struct smi_info *smi_info) #define DELL_POWEREDGE_8G_BMC_DEVICE_ID 0x20 #define DELL_POWEREDGE_8G_BMC_DEVICE_REV 0x80 #define DELL_POWEREDGE_8G_BMC_IPMI_VERSION 0x51 -#define DELL_IANA_MFR_ID {0xA2, 0x02, 0x00} +#define DELL_IANA_MFR_ID 0x0002a2 static void setup_dell_poweredge_oem_data_handler(struct smi_info *smi_info) { struct ipmi_device_id *id = &smi_info->device_id; - const char mfr[3]=DELL_IANA_MFR_ID; - if (! memcmp(mfr, id->manufacturer_id, sizeof(mfr))) { + if (id->manufacturer_id == DELL_IANA_MFR_ID) { if (id->device_id == DELL_POWEREDGE_8G_BMC_DEVICE_ID && id->device_revision == DELL_POWEREDGE_8G_BMC_DEVICE_REV && - id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) { + id->ipmi_version == DELL_POWEREDGE_8G_BMC_IPMI_VERSION) { smi_info->oem_data_avail_handler = oem_data_avail_to_receive_msg_avail; } @@ -2169,8 +2164,7 @@ static void setup_dell_poweredge_bt_xaction_handler(struct smi_info *smi_info) { struct ipmi_device_id *id = &smi_info->device_id; - const char mfr[3]=DELL_IANA_MFR_ID; - if (! memcmp(mfr, id->manufacturer_id, sizeof(mfr)) && + if (id->manufacturer_id == DELL_IANA_MFR_ID && smi_info->si_type == SI_BT) register_xaction_notifier(&dell_poweredge_bt_xaction_notifier); } @@ -2195,67 +2189,119 @@ static void setup_xaction_handlers(struct smi_info *smi_info) static inline void wait_for_timer_and_thread(struct smi_info *smi_info) { - if (smi_info->thread != NULL && smi_info->thread != ERR_PTR(-ENOMEM)) - kthread_stop(smi_info->thread); - del_timer_sync(&smi_info->si_timer); + if (smi_info->intf) { + /* The timer and thread are only running if the + interface has been started up and registered. */ + if (smi_info->thread != NULL) + kthread_stop(smi_info->thread); + del_timer_sync(&smi_info->si_timer); + } } -/* Returns 0 if initialized, or negative on an error. */ -static int init_one_smi(int intf_num, struct smi_info **smi) +static struct ipmi_default_vals { - int rv; - struct smi_info *new_smi; + int type; + int port; +} __devinit ipmi_defaults[] = +{ + { .type = SI_KCS, .port = 0xca2 }, + { .type = SI_SMIC, .port = 0xca9 }, + { .type = SI_BT, .port = 0xe4 }, + { .port = 0 } +}; +static __devinit void default_find_bmc(void) +{ + struct smi_info *info; + int i; - rv = try_init_mem(intf_num, &new_smi); - if (rv) - rv = try_init_port(intf_num, &new_smi); -#ifdef CONFIG_ACPI - if (rv && si_trydefaults) - rv = try_init_acpi(intf_num, &new_smi); -#endif -#ifdef CONFIG_DMI - if (rv && si_trydefaults) - rv = try_init_smbios(intf_num, &new_smi); -#endif - if (rv && si_trydefaults) - rv = try_init_plug_and_play(intf_num, &new_smi); + for (i = 0; ; i++) { + if (!ipmi_defaults[i].port) + break; - if (rv) - return rv; + info = kzalloc(sizeof(*info), GFP_KERNEL); + if (!info) + return; - /* So we know not to free it unless we have allocated one. */ - new_smi->intf = NULL; - new_smi->si_sm = NULL; - new_smi->handlers = NULL; + info->addr_source = NULL; - if (! new_smi->irq_setup) { - new_smi->irq = irqs[intf_num]; - new_smi->irq_setup = std_irq_setup; - new_smi->irq_cleanup = std_irq_cleanup; - } + info->si_type = ipmi_defaults[i].type; + info->io_setup = port_setup; + info->io.addr_data = ipmi_defaults[i].port; + info->io.addr_type = IPMI_IO_ADDR_SPACE; - /* Default to KCS if no type is specified. */ - if (si_type[intf_num] == NULL) { - if (si_trydefaults) - si_type[intf_num] = "kcs"; - else { - rv = -EINVAL; - goto out_err; + info->io.addr = NULL; + info->io.regspacing = DEFAULT_REGSPACING; + info->io.regsize = DEFAULT_REGSPACING; + info->io.regshift = 0; + + if (try_smi_init(info) == 0) { + /* Found one... */ + printk(KERN_INFO "ipmi_si: Found default %s state" + " machine at %s address 0x%lx\n", + si_to_str[info->si_type], + addr_space_to_str[info->io.addr_type], + info->io.addr_data); + return; } } +} + +static int is_new_interface(struct smi_info *info) +{ + struct smi_info *e; + + list_for_each_entry(e, &smi_infos, link) { + if (e->io.addr_type != info->io.addr_type) + continue; + if (e->io.addr_data == info->io.addr_data) + return 0; + } + + return 1; +} + +static int try_smi_init(struct smi_info *new_smi) +{ + int rv; + + if (new_smi->addr_source) { + printk(KERN_INFO "ipmi_si: Trying %s-specified %s state" + " machine at %s address 0x%lx, slave address 0x%x," + " irq %d\n", + new_smi->addr_source, + si_to_str[new_smi->si_type], + addr_space_to_str[new_smi->io.addr_type], + new_smi->io.addr_data, + new_smi->slave_addr, new_smi->irq); + } + + mutex_lock(&smi_infos_lock); + if (!is_new_interface(new_smi)) { + printk(KERN_WARNING "ipmi_si: duplicate interface\n"); + rv = -EBUSY; + goto out_err; + } - /* Set up the state machine to use. */ - if (strcmp(si_type[intf_num], "kcs") == 0) { + /* So we know not to free it unless we have allocated one. */ + new_smi->intf = NULL; + new_smi->si_sm = NULL; + new_smi->handlers = NULL; + + switch (new_smi->si_type) { + case SI_KCS: new_smi->handlers = &kcs_smi_handlers; - new_smi->si_type = SI_KCS; - } else if (strcmp(si_type[intf_num], "smic") == 0) { + break; + + case SI_SMIC: new_smi->handlers = &smic_smi_handlers; - new_smi->si_type = SI_SMIC; - } else if (strcmp(si_type[intf_num], "bt") == 0) { + break; + + case SI_BT: new_smi->handlers = &bt_smi_handlers; - new_smi->si_type = SI_BT; - } else { + break; + + default: /* No support for anything else yet. */ rv = -EIO; goto out_err; @@ -2263,7 +2309,7 @@ static int init_one_smi(int intf_num, struct smi_info **smi) /* Allocate the state machine's data and initialize it. */ new_smi->si_sm = kmalloc(new_smi->handlers->size(), GFP_KERNEL); - if (! new_smi->si_sm) { + if (!new_smi->si_sm) { printk(" Could not allocate state machine memory\n"); rv = -ENOMEM; goto out_err; @@ -2284,21 +2330,29 @@ static int init_one_smi(int intf_num, struct smi_info **smi) /* Do low-level detection first. */ if (new_smi->handlers->detect(new_smi->si_sm)) { + if (new_smi->addr_source) + printk(KERN_INFO "ipmi_si: Interface detection" + " failed\n"); rv = -ENODEV; goto out_err; } /* Attempt a get device id command. If it fails, we probably - don't have a SMI here. */ + don't have a BMC here. */ rv = try_get_dev_id(new_smi); - if (rv) + if (rv) { + if (new_smi->addr_source) + printk(KERN_INFO "ipmi_si: There appears to be no BMC" + " at this location\n"); goto out_err; + } setup_oem_data_handler(new_smi); setup_xaction_handlers(new_smi); /* Try to claim any interrupts. */ - new_smi->irq_setup(new_smi); + if (new_smi->irq_setup) + new_smi->irq_setup(new_smi); INIT_LIST_HEAD(&(new_smi->xmit_msgs)); INIT_LIST_HEAD(&(new_smi->hp_xmit_msgs)); @@ -2308,7 +2362,8 @@ static int init_one_smi(int intf_num, struct smi_info **smi) new_smi->interrupt_disabled = 0; atomic_set(&new_smi->stop_operation, 0); - new_smi->intf_num = intf_num; + new_smi->intf_num = smi_num; + smi_num++; /* Start clearing the flags before we enable interrupts or the timer to avoid racing with the timer. */ @@ -2317,27 +2372,37 @@ static int init_one_smi(int intf_num, struct smi_info **smi) if (new_smi->irq) new_smi->si_state = SI_CLEARING_FLAGS_THEN_SET_IRQ; - /* The ipmi_register_smi() code does some operations to - determine the channel information, so we must be ready to - handle operations before it is called. This means we have - to stop the timer if we get an error after this point. */ - init_timer(&(new_smi->si_timer)); - new_smi->si_timer.data = (long) new_smi; - new_smi->si_timer.function = smi_timeout; - new_smi->last_timeout_jiffies = jiffies; - new_smi->si_timer.expires = jiffies + SI_TIMEOUT_JIFFIES; + if (!new_smi->dev) { + /* If we don't already have a device from something + * else (like PCI), then register a new one. */ + new_smi->pdev = platform_device_alloc("ipmi_si", + new_smi->intf_num); + if (rv) { + printk(KERN_ERR + "ipmi_si_intf:" + " Unable to allocate platform device\n"); + goto out_err; + } + new_smi->dev = &new_smi->pdev->dev; + new_smi->dev->driver = &ipmi_driver; - add_timer(&(new_smi->si_timer)); - if (new_smi->si_type != SI_BT) - new_smi->thread = kthread_run(ipmi_thread, new_smi, - "kipmi%d", new_smi->intf_num); + rv = platform_device_register(new_smi->pdev); + if (rv) { + printk(KERN_ERR + "ipmi_si_intf:" + " Unable to register system interface device:" + " %d\n", + rv); + goto out_err; + } + new_smi->dev_registered = 1; + } rv = ipmi_register_smi(&handlers, new_smi, - ipmi_version_major(&new_smi->device_id), - ipmi_version_minor(&new_smi->device_id), - new_smi->slave_addr, - &(new_smi->intf)); + &new_smi->device_id, + new_smi->dev, + new_smi->slave_addr); if (rv) { printk(KERN_ERR "ipmi_si: Unable to register device: error %d\n", @@ -2365,9 +2430,11 @@ static int init_one_smi(int intf_num, struct smi_info **smi) goto out_err_stop_timer; } - *smi = new_smi; + list_add_tail(&new_smi->link, &smi_infos); + + mutex_unlock(&smi_infos_lock); - printk(" IPMI %s interface initialized\n", si_type[intf_num]); + printk(" IPMI %s interface initialized\n",si_to_str[new_smi->si_type]); return 0; @@ -2379,7 +2446,8 @@ static int init_one_smi(int intf_num, struct smi_info **smi) if (new_smi->intf) ipmi_unregister_smi(new_smi->intf); - new_smi->irq_cleanup(new_smi); + if (new_smi->irq_cleanup) + new_smi->irq_cleanup(new_smi); /* Wait until we know that we are out of any interrupt handlers might have been running before we freed the @@ -2391,23 +2459,41 @@ static int init_one_smi(int intf_num, struct smi_info **smi) new_smi->handlers->cleanup(new_smi->si_sm); kfree(new_smi->si_sm); } + if (new_smi->addr_source_cleanup) + new_smi->addr_source_cleanup(new_smi); if (new_smi->io_cleanup) new_smi->io_cleanup(new_smi); + if (new_smi->dev_registered) + platform_device_unregister(new_smi->pdev); + + kfree(new_smi); + + mutex_unlock(&smi_infos_lock); + return rv; } -static __init int init_ipmi_si(void) +static __devinit int init_ipmi_si(void) { - int rv = 0; - int pos = 0; int i; char *str; + int rv; if (initialized) return 0; initialized = 1; + /* Register the device drivers. */ + rv = driver_register(&ipmi_driver); + if (rv) { + printk(KERN_ERR + "init_ipmi_si: Unable to register driver: %d\n", + rv); + return rv; + } + + /* Parse out the si_type string into its components. */ str = si_type_str; if (*str != '\0') { @@ -2425,63 +2511,66 @@ static __init int init_ipmi_si(void) printk(KERN_INFO "IPMI System Interface driver.\n"); + hardcode_find_bmc(); + #ifdef CONFIG_DMI dmi_find_bmc(); #endif - rv = init_one_smi(0, &(smi_infos[pos])); - if (rv && ! ports[0] && si_trydefaults) { - /* If we are trying defaults and the initial port is - not set, then set it. */ - si_type[0] = "kcs"; - ports[0] = DEFAULT_KCS_IO_PORT; - rv = init_one_smi(0, &(smi_infos[pos])); - if (rv) { - /* No KCS - try SMIC */ - si_type[0] = "smic"; - ports[0] = DEFAULT_SMIC_IO_PORT; - rv = init_one_smi(0, &(smi_infos[pos])); - } - if (rv) { - /* No SMIC - try BT */ - si_type[0] = "bt"; - ports[0] = DEFAULT_BT_IO_PORT; - rv = init_one_smi(0, &(smi_infos[pos])); - } - } - if (rv == 0) - pos++; +#ifdef CONFIG_ACPI + if (si_trydefaults) + acpi_find_bmc(); +#endif + +#ifdef CONFIG_PCI + pci_module_init(&ipmi_pci_driver); +#endif - for (i = 1; i < SI_MAX_PARMS; i++) { - rv = init_one_smi(i, &(smi_infos[pos])); - if (rv == 0) - pos++; + if (si_trydefaults) { + mutex_lock(&smi_infos_lock); + if (list_empty(&smi_infos)) { + /* No BMC was found, try defaults. */ + mutex_unlock(&smi_infos_lock); + default_find_bmc(); + } else { + mutex_unlock(&smi_infos_lock); + } } - if (smi_infos[0] == NULL) { + mutex_lock(&smi_infos_lock); + if (list_empty(&smi_infos)) { + mutex_unlock(&smi_infos_lock); +#ifdef CONFIG_PCI + pci_unregister_driver(&ipmi_pci_driver); +#endif printk("ipmi_si: Unable to find any System Interface(s)\n"); return -ENODEV; + } else { + mutex_unlock(&smi_infos_lock); + return 0; } - - return 0; } module_init(init_ipmi_si); -static void __exit cleanup_one_si(struct smi_info *to_clean) +static void __devexit cleanup_one_si(struct smi_info *to_clean) { int rv; unsigned long flags; - if (! to_clean) + if (!to_clean) return; + list_del(&to_clean->link); + /* Tell the timer and interrupt handlers that we are shutting down. */ spin_lock_irqsave(&(to_clean->si_lock), flags); spin_lock(&(to_clean->msg_lock)); atomic_inc(&to_clean->stop_operation); - to_clean->irq_cleanup(to_clean); + + if (to_clean->irq_cleanup) + to_clean->irq_cleanup(to_clean); spin_unlock(&(to_clean->msg_lock)); spin_unlock_irqrestore(&(to_clean->si_lock), flags); @@ -2511,20 +2600,34 @@ static void __exit cleanup_one_si(struct smi_info *to_clean) kfree(to_clean->si_sm); + if (to_clean->addr_source_cleanup) + to_clean->addr_source_cleanup(to_clean); if (to_clean->io_cleanup) to_clean->io_cleanup(to_clean); + + if (to_clean->dev_registered) + platform_device_unregister(to_clean->pdev); + + kfree(to_clean); } static __exit void cleanup_ipmi_si(void) { - int i; + struct smi_info *e, *tmp_e; - if (! initialized) + if (!initialized) return; - for (i = 0; i < SI_MAX_DRIVERS; i++) { - cleanup_one_si(smi_infos[i]); - } +#ifdef CONFIG_PCI + pci_unregister_driver(&ipmi_pci_driver); +#endif + + mutex_lock(&smi_infos_lock); + list_for_each_entry_safe(e, tmp_e, &smi_infos, link) + cleanup_one_si(e); + mutex_unlock(&smi_infos_lock); + + driver_unregister(&ipmi_driver); } module_exit(cleanup_ipmi_si); |