diff options
Diffstat (limited to 'drivers/char/mxser.c')
| -rw-r--r-- | drivers/char/mxser.c | 662 |
1 files changed, 280 insertions, 382 deletions
diff --git a/drivers/char/mxser.c b/drivers/char/mxser.c index 4b81a85c5b53..e30575e87648 100644 --- a/drivers/char/mxser.c +++ b/drivers/char/mxser.c @@ -16,7 +16,6 @@ * Fed through a cleanup, indent and remove of non 2.6 code by Alan Cox * <alan@redhat.com>. The original 1.8 code is available on www.moxa.com. * - Fixed x86_64 cleanness - * - Fixed sleep with spinlock held in mxser_send_break */ #include <linux/module.h> @@ -47,20 +46,14 @@ #include "mxser.h" -#define MXSER_VERSION "2.0.3" /* 1.11 */ +#define MXSER_VERSION "2.0.4" /* 1.12 */ #define MXSERMAJOR 174 -#define MXSERCUMAJOR 175 #define MXSER_BOARDS 4 /* Max. boards */ #define MXSER_PORTS_PER_BOARD 8 /* Max. ports per board */ #define MXSER_PORTS (MXSER_BOARDS * MXSER_PORTS_PER_BOARD) #define MXSER_ISR_PASS_LIMIT 100 -#define MXSER_ERR_IOADDR -1 -#define MXSER_ERR_IRQ -2 -#define MXSER_ERR_IRQ_CONFLIT -3 -#define MXSER_ERR_VECTOR -4 - /*CheckIsMoxaMust return value*/ #define MOXA_OTHER_UART 0x00 #define MOXA_MUST_MU150_HWID 0x01 @@ -71,12 +64,13 @@ #define UART_MCR_AFE 0x20 #define UART_LSR_SPECIAL 0x1E +#define PCI_DEVICE_ID_POS104UL 0x1044 #define PCI_DEVICE_ID_CB108 0x1080 +#define PCI_DEVICE_ID_CP102UF 0x1023 #define PCI_DEVICE_ID_CB114 0x1142 #define PCI_DEVICE_ID_CP114UL 0x1143 #define PCI_DEVICE_ID_CB134I 0x1341 #define PCI_DEVICE_ID_CP138U 0x1380 -#define PCI_DEVICE_ID_POS104UL 0x1044 #define C168_ASIC_ID 1 @@ -142,7 +136,8 @@ static const struct mxser_cardinfo mxser_cards[] = { { "CB-134I series", 4, }, { "CP-138U series", 8, }, { "POS-104UL series", 4, }, - { "CP-114UL series", 4, } + { "CP-114UL series", 4, }, +/*30*/ { "CP-102UF series", 2, } }; /* driver_data correspond to the lines in the structure above @@ -172,18 +167,20 @@ static struct pci_device_id mxser_pcibrds[] = { { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP138U), .driver_data = 27 }, { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_POS104UL), .driver_data = 28 }, { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP114UL), .driver_data = 29 }, + { PCI_VDEVICE(MOXA, PCI_DEVICE_ID_CP102UF), .driver_data = 30 }, { } }; MODULE_DEVICE_TABLE(pci, mxser_pcibrds); -static int ioaddr[MXSER_BOARDS] = { 0, 0, 0, 0 }; +static unsigned long ioaddr[MXSER_BOARDS]; static int ttymajor = MXSERMAJOR; /* Variables for insmod */ MODULE_AUTHOR("Casper Yang"); MODULE_DESCRIPTION("MOXA Smartio/Industio Family Multiport Board Device Driver"); -module_param_array(ioaddr, int, NULL, 0); +module_param_array(ioaddr, ulong, NULL, 0); +MODULE_PARM_DESC(ioaddr, "ISA io addresses to look for a moxa board"); module_param(ttymajor, int, 0); MODULE_LICENSE("GPL"); @@ -193,7 +190,6 @@ struct mxser_log { unsigned long txcnt[MXSER_PORTS]; }; - struct mxser_mon { unsigned long rxcnt; unsigned long txcnt; @@ -222,8 +218,8 @@ struct mxser_mon_ext { struct mxser_board; struct mxser_port { + struct tty_port port; struct mxser_board *board; - struct tty_struct *tty; unsigned long ioaddr; unsigned long opmode_ioaddr; @@ -234,7 +230,6 @@ struct mxser_port { int rx_low_water; int baud_base; /* max. speed */ int type; /* UART type */ - int flags; /* defined in tty.h */ int x_char; /* xon/xoff character */ int IER; /* Interrupt Enable Register */ @@ -244,20 +239,14 @@ struct mxser_port { unsigned char ldisc_stop_rx; int custom_divisor; - int close_delay; - unsigned short closing_wait; unsigned char err_shadow; - unsigned long event; - int count; /* # of fd on device */ - int blocked_open; /* # of blocked opens */ struct async_icount icount; /* kernel counters for 4 input interrupts */ int timeout; int read_status_mask; int ignore_status_mask; int xmit_fifo_size; - unsigned char *xmit_buf; int xmit_head; int xmit_tail; int xmit_cnt; @@ -267,7 +256,6 @@ struct mxser_port { struct mxser_mon mon_data; spinlock_t slock; - wait_queue_head_t open_wait; wait_queue_head_t delta_msr_wait; }; @@ -292,19 +280,9 @@ struct mxser_mstatus { int dcd; }; -static struct mxser_mstatus GMStatus[MXSER_PORTS]; - -static int mxserBoardCAP[MXSER_BOARDS] = { - 0, 0, 0, 0 - /* 0x180, 0x280, 0x200, 0x320 */ -}; - static struct mxser_board mxser_boards[MXSER_BOARDS]; static struct tty_driver *mxvar_sdriver; static struct mxser_log mxvar_log; -static int mxvar_diagflag; -static unsigned char mxser_msr[MXSER_PORTS + 1]; -static struct mxser_mon_ext mon_data_ext; static int mxser_set_baud_method[MXSER_PORTS + 1]; static void mxser_enable_must_enchance_mode(unsigned long baseio) @@ -548,6 +526,7 @@ static void process_txrx_fifo(struct mxser_port *info) static unsigned char mxser_get_msr(int baseaddr, int mode, int port) { + static unsigned char mxser_msr[MXSER_PORTS + 1]; unsigned char status = 0; status = inb(baseaddr + UART_MSR); @@ -575,7 +554,7 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, */ if ((filp->f_flags & O_NONBLOCK) || test_bit(TTY_IO_ERROR, &tty->flags)) { - port->flags |= ASYNC_NORMAL_ACTIVE; + port->port.flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -585,32 +564,32 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, /* * Block waiting for the carrier detect and the line to become * free (i.e., not in use by the callout). While we are in - * this loop, port->count is dropped by one, so that + * this loop, port->port.count is dropped by one, so that * mxser_close() knows when to free things. We restore it upon * exit, either normal or abnormal. */ retval = 0; - add_wait_queue(&port->open_wait, &wait); + add_wait_queue(&port->port.open_wait, &wait); spin_lock_irqsave(&port->slock, flags); if (!tty_hung_up_p(filp)) - port->count--; + port->port.count--; spin_unlock_irqrestore(&port->slock, flags); - port->blocked_open++; + port->port.blocked_open++; while (1) { spin_lock_irqsave(&port->slock, flags); outb(inb(port->ioaddr + UART_MCR) | UART_MCR_DTR | UART_MCR_RTS, port->ioaddr + UART_MCR); spin_unlock_irqrestore(&port->slock, flags); set_current_state(TASK_INTERRUPTIBLE); - if (tty_hung_up_p(filp) || !(port->flags & ASYNC_INITIALIZED)) { - if (port->flags & ASYNC_HUP_NOTIFY) + if (tty_hung_up_p(filp) || !(port->port.flags & ASYNC_INITIALIZED)) { + if (port->port.flags & ASYNC_HUP_NOTIFY) retval = -EAGAIN; else retval = -ERESTARTSYS; break; } - if (!(port->flags & ASYNC_CLOSING) && + if (!(port->port.flags & ASYNC_CLOSING) && (do_clocal || (inb(port->ioaddr + UART_MSR) & UART_MSR_DCD))) break; @@ -621,13 +600,13 @@ static int mxser_block_til_ready(struct tty_struct *tty, struct file *filp, schedule(); } set_current_state(TASK_RUNNING); - remove_wait_queue(&port->open_wait, &wait); + remove_wait_queue(&port->port.open_wait, &wait); if (!tty_hung_up_p(filp)) - port->count++; - port->blocked_open--; + port->port.count++; + port->port.blocked_open--; if (retval) return retval; - port->flags |= ASYNC_NORMAL_ACTIVE; + port->port.flags |= ASYNC_NORMAL_ACTIVE; return 0; } @@ -636,7 +615,7 @@ static int mxser_set_baud(struct mxser_port *info, long newspd) int quot = 0, baud; unsigned char cval; - if (!info->tty || !info->tty->termios) + if (!info->port.tty || !info->port.tty->termios) return -1; if (!(info->ioaddr)) @@ -647,13 +626,13 @@ static int mxser_set_baud(struct mxser_port *info, long newspd) if (newspd == 134) { quot = 2 * info->baud_base / 269; - tty_encode_baud_rate(info->tty, 134, 134); + tty_encode_baud_rate(info->port.tty, 134, 134); } else if (newspd) { quot = info->baud_base / newspd; if (quot == 0) quot = 1; baud = info->baud_base/quot; - tty_encode_baud_rate(info->tty, baud, baud); + tty_encode_baud_rate(info->port.tty, baud, baud); } else { quot = 0; } @@ -679,7 +658,7 @@ static int mxser_set_baud(struct mxser_port *info, long newspd) outb(cval, info->ioaddr + UART_LCR); /* reset DLAB */ #ifdef BOTHER - if (C_BAUD(info->tty) == BOTHER) { + if (C_BAUD(info->port.tty) == BOTHER) { quot = info->baud_base % newspd; quot *= 8; if (quot % newspd > newspd / 2) { @@ -707,14 +686,14 @@ static int mxser_change_speed(struct mxser_port *info, int ret = 0; unsigned char status; - if (!info->tty || !info->tty->termios) + if (!info->port.tty || !info->port.tty->termios) return ret; - cflag = info->tty->termios->c_cflag; + cflag = info->port.tty->termios->c_cflag; if (!(info->ioaddr)) return ret; - if (mxser_set_baud_method[info->tty->index] == 0) - mxser_set_baud(info, tty_get_baud_rate(info->tty)); + if (mxser_set_baud_method[info->port.tty->index] == 0) + mxser_set_baud(info, tty_get_baud_rate(info->port.tty)); /* byte size and parity */ switch (cflag & CSIZE) { @@ -777,15 +756,15 @@ static int mxser_change_speed(struct mxser_port *info, info->IER &= ~UART_IER_MSI; info->MCR &= ~UART_MCR_AFE; if (cflag & CRTSCTS) { - info->flags |= ASYNC_CTS_FLOW; + info->port.flags |= ASYNC_CTS_FLOW; info->IER |= UART_IER_MSI; if ((info->type == PORT_16550A) || (info->board->chip_flag)) { info->MCR |= UART_MCR_AFE; } else { status = inb(info->ioaddr + UART_MSR); - if (info->tty->hw_stopped) { + if (info->port.tty->hw_stopped) { if (status & UART_MSR_CTS) { - info->tty->hw_stopped = 0; + info->port.tty->hw_stopped = 0; if (info->type != PORT_16550A && !info->board->chip_flag) { outb(info->IER & ~UART_IER_THRI, @@ -795,11 +774,11 @@ static int mxser_change_speed(struct mxser_port *info, outb(info->IER, info->ioaddr + UART_IER); } - tty_wakeup(info->tty); + tty_wakeup(info->port.tty); } } else { if (!(status & UART_MSR_CTS)) { - info->tty->hw_stopped = 1; + info->port.tty->hw_stopped = 1; if ((info->type != PORT_16550A) && (!info->board->chip_flag)) { info->IER &= ~UART_IER_THRI; @@ -810,13 +789,13 @@ static int mxser_change_speed(struct mxser_port *info, } } } else { - info->flags &= ~ASYNC_CTS_FLOW; + info->port.flags &= ~ASYNC_CTS_FLOW; } outb(info->MCR, info->ioaddr + UART_MCR); if (cflag & CLOCAL) { - info->flags &= ~ASYNC_CHECK_CD; + info->port.flags &= ~ASYNC_CHECK_CD; } else { - info->flags |= ASYNC_CHECK_CD; + info->port.flags |= ASYNC_CHECK_CD; info->IER |= UART_IER_MSI; } outb(info->IER, info->ioaddr + UART_IER); @@ -825,21 +804,21 @@ static int mxser_change_speed(struct mxser_port *info, * Set up parity check flag */ info->read_status_mask = UART_LSR_OE | UART_LSR_THRE | UART_LSR_DR; - if (I_INPCK(info->tty)) + if (I_INPCK(info->port.tty)) info->read_status_mask |= UART_LSR_FE | UART_LSR_PE; - if (I_BRKINT(info->tty) || I_PARMRK(info->tty)) + if (I_BRKINT(info->port.tty) || I_PARMRK(info->port.tty)) info->read_status_mask |= UART_LSR_BI; info->ignore_status_mask = 0; - if (I_IGNBRK(info->tty)) { + if (I_IGNBRK(info->port.tty)) { info->ignore_status_mask |= UART_LSR_BI; info->read_status_mask |= UART_LSR_BI; /* * If we're ignore parity and break indicators, ignore * overruns too. (For real raw support). */ - if (I_IGNPAR(info->tty)) { + if (I_IGNPAR(info->port.tty)) { info->ignore_status_mask |= UART_LSR_OE | UART_LSR_PE | @@ -851,16 +830,16 @@ static int mxser_change_speed(struct mxser_port *info, } } if (info->board->chip_flag) { - mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->tty)); - mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->tty)); - if (I_IXON(info->tty)) { + mxser_set_must_xon1_value(info->ioaddr, START_CHAR(info->port.tty)); + mxser_set_must_xoff1_value(info->ioaddr, STOP_CHAR(info->port.tty)); + if (I_IXON(info->port.tty)) { mxser_enable_must_rx_software_flow_control( info->ioaddr); } else { mxser_disable_must_rx_software_flow_control( info->ioaddr); } - if (I_IXOFF(info->tty)) { + if (I_IXOFF(info->port.tty)) { mxser_enable_must_tx_software_flow_control( info->ioaddr); } else { @@ -890,15 +869,15 @@ static void mxser_check_modem_status(struct mxser_port *port, int status) port->mon_data.modem_status = status; wake_up_interruptible(&port->delta_msr_wait); - if ((port->flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { + if ((port->port.flags & ASYNC_CHECK_CD) && (status & UART_MSR_DDCD)) { if (status & UART_MSR_DCD) - wake_up_interruptible(&port->open_wait); + wake_up_interruptible(&port->port.open_wait); } - if (port->flags & ASYNC_CTS_FLOW) { - if (port->tty->hw_stopped) { + if (port->port.flags & ASYNC_CTS_FLOW) { + if (port->port.tty->hw_stopped) { if (status & UART_MSR_CTS) { - port->tty->hw_stopped = 0; + port->port.tty->hw_stopped = 0; if ((port->type != PORT_16550A) && (!port->board->chip_flag)) { @@ -908,11 +887,11 @@ static void mxser_check_modem_status(struct mxser_port *port, int status) outb(port->IER, port->ioaddr + UART_IER); } - tty_wakeup(port->tty); + tty_wakeup(port->port.tty); } } else { if (!(status & UART_MSR_CTS)) { - port->tty->hw_stopped = 1; + port->port.tty->hw_stopped = 1; if (port->type != PORT_16550A && !port->board->chip_flag) { port->IER &= ~UART_IER_THRI; @@ -935,23 +914,23 @@ static int mxser_startup(struct mxser_port *info) spin_lock_irqsave(&info->slock, flags); - if (info->flags & ASYNC_INITIALIZED) { + if (info->port.flags & ASYNC_INITIALIZED) { free_page(page); spin_unlock_irqrestore(&info->slock, flags); return 0; } if (!info->ioaddr || !info->type) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); free_page(page); spin_unlock_irqrestore(&info->slock, flags); return 0; } - if (info->xmit_buf) + if (info->port.xmit_buf) free_page(page); else - info->xmit_buf = (unsigned char *) page; + info->port.xmit_buf = (unsigned char *) page; /* * Clear the FIFO buffers and disable them @@ -973,8 +952,8 @@ static int mxser_startup(struct mxser_port *info) if (inb(info->ioaddr + UART_LSR) == 0xff) { spin_unlock_irqrestore(&info->slock, flags); if (capable(CAP_SYS_ADMIN)) { - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); return 0; } else return -ENODEV; @@ -1012,15 +991,15 @@ static int mxser_startup(struct mxser_port *info) (void) inb(info->ioaddr + UART_IIR); (void) inb(info->ioaddr + UART_MSR); - if (info->tty) - clear_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + clear_bit(TTY_IO_ERROR, &info->port.tty->flags); info->xmit_cnt = info->xmit_head = info->xmit_tail = 0; /* * and set the speed of the serial port */ mxser_change_speed(info, NULL); - info->flags |= ASYNC_INITIALIZED; + info->port.flags |= ASYNC_INITIALIZED; spin_unlock_irqrestore(&info->slock, flags); return 0; @@ -1034,7 +1013,7 @@ static void mxser_shutdown(struct mxser_port *info) { unsigned long flags; - if (!(info->flags & ASYNC_INITIALIZED)) + if (!(info->port.flags & ASYNC_INITIALIZED)) return; spin_lock_irqsave(&info->slock, flags); @@ -1048,15 +1027,15 @@ static void mxser_shutdown(struct mxser_port *info) /* * Free the IRQ, if necessary */ - if (info->xmit_buf) { - free_page((unsigned long) info->xmit_buf); - info->xmit_buf = NULL; + if (info->port.xmit_buf) { + free_page((unsigned long) info->port.xmit_buf); + info->port.xmit_buf = NULL; } info->IER = 0; outb(0x00, info->ioaddr + UART_IER); - if (!info->tty || (info->tty->termios->c_cflag & HUPCL)) + if (!info->port.tty || (info->port.tty->termios->c_cflag & HUPCL)) info->MCR &= ~(UART_MCR_DTR | UART_MCR_RTS); outb(info->MCR, info->ioaddr + UART_MCR); @@ -1072,10 +1051,10 @@ static void mxser_shutdown(struct mxser_port *info) /* read data port to reset things */ (void) inb(info->ioaddr + UART_RX); - if (info->tty) - set_bit(TTY_IO_ERROR, &info->tty->flags); + if (info->port.tty) + set_bit(TTY_IO_ERROR, &info->port.tty->flags); - info->flags &= ~ASYNC_INITIALIZED; + info->port.flags &= ~ASYNC_INITIALIZED; if (info->board->chip_flag) SET_MOXA_MUST_NO_SOFTWARE_FLOW_CONTROL(info->ioaddr); @@ -1105,12 +1084,12 @@ static int mxser_open(struct tty_struct *tty, struct file *filp) return -ENODEV; tty->driver_data = info; - info->tty = tty; + info->port.tty = tty; /* * Start up serial port */ spin_lock_irqsave(&info->slock, flags); - info->count++; + info->port.count++; spin_unlock_irqrestore(&info->slock, flags); retval = mxser_startup(info); if (retval) @@ -1170,42 +1149,42 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) spin_unlock_irqrestore(&info->slock, flags); return; } - if ((tty->count == 1) && (info->count != 1)) { + if ((tty->count == 1) && (info->port.count != 1)) { /* * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. Info->count should always + * structure will be freed. Info->port.count should always * be one in these conditions. If it's greater than * one, we've got real problems, since it means the * serial port won't be shutdown. */ printk(KERN_ERR "mxser_close: bad serial port count; " - "tty->count is 1, info->count is %d\n", info->count); - info->count = 1; + "tty->count is 1, info->port.count is %d\n", info->port.count); + info->port.count = 1; } - if (--info->count < 0) { + if (--info->port.count < 0) { printk(KERN_ERR "mxser_close: bad serial port count for " - "ttys%d: %d\n", tty->index, info->count); - info->count = 0; + "ttys%d: %d\n", tty->index, info->port.count); + info->port.count = 0; } - if (info->count) { + if (info->port.count) { spin_unlock_irqrestore(&info->slock, flags); return; } - info->flags |= ASYNC_CLOSING; + info->port.flags |= ASYNC_CLOSING; spin_unlock_irqrestore(&info->slock, flags); /* * Save the termios structure, since this port may have * separate termios for callout and dialin. */ - if (info->flags & ASYNC_NORMAL_ACTIVE) + if (info->port.flags & ASYNC_NORMAL_ACTIVE) info->normal_termios = *tty->termios; /* * Now we wait for the transmit buffer to clear; and we notify * the line discipline to only process XON/XOFF characters. */ tty->closing = 1; - if (info->closing_wait != ASYNC_CLOSING_WAIT_NONE) - tty_wait_until_sent(tty, info->closing_wait); + if (info->port.closing_wait != ASYNC_CLOSING_WAIT_NONE) + tty_wait_until_sent(tty, info->port.closing_wait); /* * At this point we stop accepting input. To do this, we * disable the receive line status interrupts, and tell the @@ -1216,7 +1195,7 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) if (info->board->chip_flag) info->IER &= ~MOXA_MUST_RECV_ISR; - if (info->flags & ASYNC_INITIALIZED) { + if (info->port.flags & ASYNC_INITIALIZED) { outb(info->IER, info->ioaddr + UART_IER); /* * Before we drop DTR, make sure the UART transmitter @@ -1236,15 +1215,14 @@ static void mxser_close(struct tty_struct *tty, struct file *filp) tty_ldisc_flush(tty); tty->closing = 0; - info->event = 0; - info->tty = NULL; - if (info->blocked_open) { - if (info->close_delay) - schedule_timeout_interruptible(info->close_delay); - wake_up_interruptible(&info->open_wait); + info->port.tty = NULL; + if (info->port.blocked_open) { + if (info->port.close_delay) + schedule_timeout_interruptible(info->port.close_delay); + wake_up_interruptible(&info->port.open_wait); } - info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); + info->port.flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CLOSING); } static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int count) @@ -1253,7 +1231,7 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou struct mxser_port *info = tty->driver_data; unsigned long flags; - if (!info->xmit_buf) + if (!info->port.xmit_buf) return 0; while (1) { @@ -1262,7 +1240,7 @@ static int mxser_write(struct tty_struct *tty, const unsigned char *buf, int cou if (c <= 0) break; - memcpy(info->xmit_buf + info->xmit_head, buf, c); + memcpy(info->port.xmit_buf + info->xmit_head, buf, c); spin_lock_irqsave(&info->slock, flags); info->xmit_head = (info->xmit_head + c) & (SERIAL_XMIT_SIZE - 1); @@ -1294,14 +1272,14 @@ static int mxser_put_char(struct tty_struct *tty, unsigned char ch) struct mxser_port *info = tty->driver_data; unsigned long flags; - if (!info->xmit_buf) + if (!info->port.xmit_buf) return 0; if (info->xmit_cnt >= SERIAL_XMIT_SIZE - 1) return 0; spin_lock_irqsave(&info->slock, flags); - info->xmit_buf[info->xmit_head++] = ch; + info->port.xmit_buf[info->xmit_head++] = ch; info->xmit_head &= SERIAL_XMIT_SIZE - 1; info->xmit_cnt++; spin_unlock_irqrestore(&info->slock, flags); @@ -1325,13 +1303,9 @@ static void mxser_flush_chars(struct tty_struct *tty) struct mxser_port *info = tty->driver_data; unsigned long flags; - if (info->xmit_cnt <= 0 || - tty->stopped || - !info->xmit_buf || - (tty->hw_stopped && - (info->type != PORT_16550A) && - (!info->board->chip_flag) - )) + if (info->xmit_cnt <= 0 || tty->stopped || !info->port.xmit_buf || + (tty->hw_stopped && info->type != PORT_16550A && + !info->board->chip_flag)) return; spin_lock_irqsave(&info->slock, flags); @@ -1349,9 +1323,7 @@ static int mxser_write_room(struct tty_struct *tty) int ret; ret = SERIAL_XMIT_SIZE - info->xmit_cnt - 1; - if (ret < 0) - ret = 0; - return ret; + return ret < 0 ? 0 : ret; } static int mxser_chars_in_buffer(struct tty_struct *tty) @@ -1370,13 +1342,13 @@ static int mxser_get_serial_info(struct mxser_port *info, { struct serial_struct tmp = { .type = info->type, - .line = info->tty->index, + .line = info->port.tty->index, .port = info->ioaddr, .irq = info->board->irq, - .flags = info->flags, + .flags = info->port.flags, .baud_base = info->baud_base, - .close_delay = info->close_delay, - .closing_wait = info->closing_wait, + .close_delay = info->port.close_delay, + .closing_wait = info->port.closing_wait, .custom_divisor = info->custom_divisor, .hub6 = 0 }; @@ -1403,33 +1375,32 @@ static int mxser_set_serial_info(struct mxser_port *info, new_serial.port != info->ioaddr) return -EINVAL; - flags = info->flags & ASYNC_SPD_MASK; + flags = info->port.flags & ASYNC_SPD_MASK; if (!capable(CAP_SYS_ADMIN)) { if ((new_serial.baud_base != info->baud_base) || - (new_serial.close_delay != info->close_delay) || - ((new_serial.flags & ~ASYNC_USR_MASK) != (info->flags & ~ASYNC_USR_MASK))) + (new_serial.close_delay != info->port.close_delay) || + ((new_serial.flags & ~ASYNC_USR_MASK) != (info->port.flags & ~ASYNC_USR_MASK))) return -EPERM; - info->flags = ((info->flags & ~ASYNC_USR_MASK) | + info->port.flags = ((info->port.flags & ~ASYNC_USR_MASK) | (new_serial.flags & ASYNC_USR_MASK)); } else { /* * OK, past this point, all the error checking has been done. * At this point, we start making changes..... */ - info->flags = ((info->flags & ~ASYNC_FLAGS) | + info->port.flags = ((info->port.flags & ~ASYNC_FLAGS) | (new_serial.flags & ASYNC_FLAGS)); - info->close_delay = new_serial.close_delay * HZ / 100; - info->closing_wait = new_serial.closing_wait * HZ / 100; - info->tty->low_latency = - (info->flags & ASYNC_LOW_LATENCY) ? 1 : 0; - info->tty->low_latency = 0; - if ((info->flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && + info->port.close_delay = new_serial.close_delay * HZ / 100; + info->port.closing_wait = new_serial.closing_wait * HZ / 100; + info->port.tty->low_latency = + (info->port.flags & ASYNC_LOW_LATENCY) ? 1 : 0; + if ((info->port.flags & ASYNC_SPD_MASK) == ASYNC_SPD_CUST && (new_serial.baud_base != info->baud_base || new_serial.custom_divisor != info->custom_divisor)) { baud = new_serial.baud_base / new_serial.custom_divisor; - tty_encode_baud_rate(info->tty, baud, baud); + tty_encode_baud_rate(info->port.tty, baud, baud); } } @@ -1437,8 +1408,8 @@ static int mxser_set_serial_info(struct mxser_port *info, process_txrx_fifo(info); - if (info->flags & ASYNC_INITIALIZED) { - if (flags != (info->flags & ASYNC_SPD_MASK)) { + if (info->port.flags & ASYNC_INITIALIZED) { + if (flags != (info->port.flags & ASYNC_SPD_MASK)) { spin_lock_irqsave(&info->slock, sl_flags); mxser_change_speed(info, NULL); spin_unlock_irqrestore(&info->slock, sl_flags); @@ -1473,27 +1444,6 @@ static int mxser_get_lsr_info(struct mxser_port *info, return put_user(result, value); } -/* - * This routine sends a break character out the serial port. - */ -static void mxser_send_break(struct mxser_port *info, int duration) -{ - unsigned long flags; - - if (!info->ioaddr) - return; - set_current_state(TASK_INTERRUPTIBLE); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->ioaddr + UART_LCR) | UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); - schedule_timeout(duration); - spin_lock_irqsave(&info->slock, flags); - outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, - info->ioaddr + UART_LCR); - spin_unlock_irqrestore(&info->slock, flags); -} - static int mxser_tiocmget(struct tty_struct *tty, struct file *file) { struct mxser_port *info = tty->driver_data; @@ -1662,6 +1612,8 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) switch (cmd) { case MOXA_GET_MAJOR: + printk(KERN_WARNING "mxser: '%s' uses deprecated ioctl %x, fix " + "your userspace\n", current->comm, cmd); return put_user(ttymajor, (int __user *)argp); case MOXA_CHKPORTENABLE: @@ -1679,62 +1631,60 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) ret = -EFAULT; unlock_kernel(); return ret; - case MOXA_GETMSTATUS: + case MOXA_GETMSTATUS: { + struct mxser_mstatus ms, __user *msu = argp; lock_kernel(); for (i = 0; i < MXSER_BOARDS; i++) for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { port = &mxser_boards[i].ports[j]; + memset(&ms, 0, sizeof(ms)); - GMStatus[i].ri = 0; - if (!port->ioaddr) { - GMStatus[i].dcd = 0; - GMStatus[i].dsr = 0; - GMStatus[i].cts = 0; - continue; - } + if (!port->ioaddr) + goto copy; - if (!port->tty || !port->tty->termios) - GMStatus[i].cflag = - port->normal_termios.c_cflag; + if (!port->port.tty || !port->port.tty->termios) + ms.cflag = port->normal_termios.c_cflag; else - GMStatus[i].cflag = - port->tty->termios->c_cflag; + ms.cflag = port->port.tty->termios->c_cflag; status = inb(port->ioaddr + UART_MSR); - if (status & 0x80 /*UART_MSR_DCD */ ) - GMStatus[i].dcd = 1; - else - GMStatus[i].dcd = 0; - - if (status & 0x20 /*UART_MSR_DSR */ ) - GMStatus[i].dsr = 1; - else - GMStatus[i].dsr = 0; - - - if (status & 0x10 /*UART_MSR_CTS */ ) - GMStatus[i].cts = 1; - else - GMStatus[i].cts = 0; + if (status & UART_MSR_DCD) + ms.dcd = 1; + if (status & UART_MSR_DSR) + ms.dsr = 1; + if (status & UART_MSR_CTS) + ms.cts = 1; + copy: + if (copy_to_user(msu, &ms, sizeof(ms))) { + unlock_kernel(); + return -EFAULT; + } + msu++; } unlock_kernel(); - if (copy_to_user(argp, GMStatus, - sizeof(struct mxser_mstatus) * MXSER_PORTS)) - return -EFAULT; return 0; + } case MOXA_ASPP_MON_EXT: { - int p, shiftbit; - unsigned long opmode; - unsigned cflag, iflag; + struct mxser_mon_ext *me; /* it's 2k, stack unfriendly */ + unsigned int cflag, iflag, p; + u8 opmode; + + me = kzalloc(sizeof(*me), GFP_KERNEL); + if (!me) + return -ENOMEM; lock_kernel(); - for (i = 0; i < MXSER_BOARDS; i++) { - for (j = 0; j < MXSER_PORTS_PER_BOARD; j++) { + for (i = 0, p = 0; i < MXSER_BOARDS; i++) { + for (j = 0; j < MXSER_PORTS_PER_BOARD; j++, p++) { + if (p >= ARRAY_SIZE(me->rx_cnt)) { + i = MXSER_BOARDS; + break; + } port = &mxser_boards[i].ports[j]; if (!port->ioaddr) continue; - status = mxser_get_msr(port->ioaddr, 0, i); + status = mxser_get_msr(port->ioaddr, 0, p); if (status & UART_MSR_TERI) port->icount.rng++; @@ -1746,59 +1696,47 @@ static int mxser_ioctl_special(unsigned int cmd, void __user *argp) port->icount.cts++; port->mon_data.modem_status = status; - mon_data_ext.rx_cnt[i] = port->mon_data.rxcnt; - mon_data_ext.tx_cnt[i] = port->mon_data.txcnt; - mon_data_ext.up_rxcnt[i] = - port->mon_data.up_rxcnt; - mon_data_ext.up_txcnt[i] = - port->mon_data.up_txcnt; - mon_data_ext.modem_status[i] = + me->rx_cnt[p] = port->mon_data.rxcnt; + me->tx_cnt[p] = port->mon_data.txcnt; + me->up_rxcnt[p] = port->mon_data.up_rxcnt; + me->up_txcnt[p] = port->mon_data.up_txcnt; + me->modem_status[p] = port->mon_data.modem_status; - mon_data_ext.baudrate[i] = - tty_get_baud_rate(port->tty); + me->baudrate[p] = tty_get_baud_rate(port->port.tty); - if (!port->tty || !port->tty->termios) { + if (!port->port.tty || !port->port.tty->termios) { cflag = port->normal_termios.c_cflag; iflag = port->normal_termios.c_iflag; } else { - cflag = port->tty->termios->c_cflag; - iflag = port->tty->termios->c_iflag; + cflag = port->port.tty->termios->c_cflag; + iflag = port->port.tty->termios->c_iflag; } - mon_data_ext.databits[i] = cflag & CSIZE; - - mon_data_ext.stopbits[i] = cflag & CSTOPB; - - mon_data_ext.parity[i] = - cflag & (PARENB | PARODD | CMSPAR); - - mon_data_ext.flowctrl[i] = 0x00; + me->databits[p] = cflag & CSIZE; + me->stopbits[p] = cflag & CSTOPB; + me->parity[p] = cflag & (PARENB | PARODD | + CMSPAR); if (cflag & CRTSCTS) - mon_data_ext.flowctrl[i] |= 0x03; + me->flowctrl[p] |= 0x03; if (iflag & (IXON | IXOFF)) - mon_data_ext.flowctrl[i] |= 0x0C; + me->flowctrl[p] |= 0x0C; if (port->type == PORT_16550A) - mon_data_ext.fifo[i] = 1; - else - mon_data_ext.fifo[i] = 0; + me->fifo[p] = 1; - p = i % 4; - shiftbit = p * 2; - opmode = inb(port->opmode_ioaddr) >> shiftbit; + opmode = inb(port->opmode_ioaddr) >> + ((p % 4) * 2); opmode &= OP_MODE_MASK; - - mon_data_ext.iftype[i] = opmode; - + me->iftype[p] = opmode; } } unlock_kernel(); - if (copy_to_user(argp, &mon_data_ext, - sizeof(mon_data_ext))) - return -EFAULT; - return 0; + if (copy_to_user(argp, me, sizeof(*me))) + ret = -EFAULT; + kfree(me); + return ret; } default: return -ENOIOCTLCMD; @@ -1832,7 +1770,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, { struct mxser_port *info = tty->driver_data; struct async_icount cnow; - struct serial_icounter_struct __user *p_cuser; unsigned long flags; void __user *argp = (void __user *)arg; int retval; @@ -1881,21 +1818,6 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, return -EIO; switch (cmd) { - case TCSBRK: /* SVID version: non-zero arg --> no break */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - if (!arg) - mxser_send_break(info, HZ / 4); /* 1/4 second */ - return 0; - case TCSBRKP: /* support for POSIX tcsendbreak() */ - retval = tty_check_change(tty); - if (retval) - return retval; - tty_wait_until_sent(tty, 0); - mxser_send_break(info, arg ? arg * (HZ / 10) : HZ / 4); - return 0; case TIOCGSERIAL: lock_kernel(); retval = mxser_get_serial_info(info, argp); @@ -1927,30 +1849,26 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, * NB: both 1->0 and 0->1 transitions are counted except for * RI where only 0->1 is counted. */ - case TIOCGICOUNT: + case TIOCGICOUNT: { + struct serial_icounter_struct icnt = { 0 }; spin_lock_irqsave(&info->slock, flags); cnow = info->icount; spin_unlock_irqrestore(&info->slock, flags); - p_cuser = argp; - if (put_user(cnow.frame, &p_cuser->frame)) - return -EFAULT; - if (put_user(cnow.brk, &p_cuser->brk)) - return -EFAULT; - if (put_user(cnow.overrun, &p_cuser->overrun)) - return -EFAULT; - if (put_user(cnow.buf_overrun, &p_cuser->buf_overrun)) - return -EFAULT; - if (put_user(cnow.parity, &p_cuser->parity)) - return -EFAULT; - if (put_user(cnow.rx, &p_cuser->rx)) - return -EFAULT; - if (put_user(cnow.tx, &p_cuser->tx)) - return -EFAULT; - put_user(cnow.cts, &p_cuser->cts); - put_user(cnow.dsr, &p_cuser->dsr); - put_user(cnow.rng, &p_cuser->rng); - put_user(cnow.dcd, &p_cuser->dcd); - return 0; + + icnt.frame = cnow.frame; + icnt.brk = cnow.brk; + icnt.overrun = cnow.overrun; + icnt.buf_overrun = cnow.buf_overrun; + icnt.parity = cnow.parity; + icnt.rx = cnow.rx; + icnt.tx = cnow.tx; + icnt.cts = cnow.cts; + icnt.dsr = cnow.dsr; + icnt.rng = cnow.rng; + icnt.dcd = cnow.dcd; + + return copy_to_user(argp, &icnt, sizeof(icnt)) ? -EFAULT : 0; + } case MOXA_HighSpeedOn: return put_user(info->baud_base != 115200 ? 1 : 0, (int __user *)argp); case MOXA_SDS_RSTICOUNTER: @@ -1989,7 +1907,7 @@ static int mxser_ioctl(struct tty_struct *tty, struct file *file, else info->mon_data.hold_reason |= NPPI_NOTIFY_XOFFXENT; - if (info->tty->hw_stopped) + if (info->port.tty->hw_stopped) info->mon_data.hold_reason |= NPPI_NOTIFY_CTSHOLD; else info->mon_data.hold_reason &= ~NPPI_NOTIFY_CTSHOLD; @@ -2038,7 +1956,7 @@ static void mxser_stoprx(struct tty_struct *tty) } } - if (info->tty->termios->c_cflag & CRTSCTS) { + if (info->port.tty->termios->c_cflag & CRTSCTS) { info->MCR &= ~UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); } @@ -2075,7 +1993,7 @@ static void mxser_unthrottle(struct tty_struct *tty) } } - if (info->tty->termios->c_cflag & CRTSCTS) { + if (info->port.tty->termios->c_cflag & CRTSCTS) { info->MCR |= UART_MCR_RTS; outb(info->MCR, info->ioaddr + UART_MCR); } @@ -2106,7 +2024,7 @@ static void mxser_start(struct tty_struct *tty) unsigned long flags; spin_lock_irqsave(&info->slock, flags); - if (info->xmit_cnt && info->xmit_buf) { + if (info->xmit_cnt && info->port.xmit_buf) { outb(info->IER & ~UART_IER_THRI, info->ioaddr + UART_IER); info->IER |= UART_IER_THRI; outb(info->IER, info->ioaddr + UART_IER); @@ -2219,17 +2137,16 @@ static void mxser_hangup(struct tty_struct *tty) mxser_flush_buffer(tty); mxser_shutdown(info); - info->event = 0; - info->count = 0; - info->flags &= ~ASYNC_NORMAL_ACTIVE; - info->tty = NULL; - wake_up_interruptible(&info->open_wait); + info->port.count = 0; + info->port.flags &= ~ASYNC_NORMAL_ACTIVE; + info->port.tty = NULL; + wake_up_interruptible(&info->port.open_wait); } /* * mxser_rs_break() --- routine which turns the break handling on or off */ -static void mxser_rs_break(struct tty_struct *tty, int break_state) +static int mxser_rs_break(struct tty_struct *tty, int break_state) { struct mxser_port *info = tty->driver_data; unsigned long flags; @@ -2242,11 +2159,12 @@ static void mxser_rs_break(struct tty_struct *tty, int break_state) outb(inb(info->ioaddr + UART_LCR) & ~UART_LCR_SBC, info->ioaddr + UART_LCR); spin_unlock_irqrestore(&info->slock, flags); + return 0; } static void mxser_receive_chars(struct mxser_port *port, int *status) { - struct tty_struct *tty = port->tty; + struct tty_struct *tty = port->port.tty; unsigned char ch, gdl; int ignored = 0; int cnt = 0; @@ -2302,7 +2220,7 @@ intr_old: flag = TTY_BREAK; port->icount.brk++; - if (port->flags & ASYNC_SAK) + if (port->port.flags & ASYNC_SAK) do_SAK(tty); } else if (*status & UART_LSR_PE) { flag = TTY_PARITY; @@ -2333,7 +2251,7 @@ intr_old: } while (*status & UART_LSR_DR); end_intr: - mxvar_log.rxcnt[port->tty->index] += cnt; + mxvar_log.rxcnt[port->port.tty->index] += cnt; port->mon_data.rxcnt += cnt; port->mon_data.up_rxcnt += cnt; @@ -2354,18 +2272,18 @@ static void mxser_transmit_chars(struct mxser_port *port) if (port->x_char) { outb(port->x_char, port->ioaddr + UART_TX); port->x_char = 0; - mxvar_log.txcnt[port->tty->index]++; + mxvar_log.txcnt[port->port.tty->index]++; port->mon_data.txcnt++; port->mon_data.up_txcnt++; port->icount.tx++; return; } - if (port->xmit_buf == NULL) + if (port->port.xmit_buf == NULL) return; - if ((port->xmit_cnt <= 0) || port->tty->stopped || - (port->tty->hw_stopped && + if ((port->xmit_cnt <= 0) || port->port.tty->stopped || + (port->port.tty->hw_stopped && (port->type != PORT_16550A) && (!port->board->chip_flag))) { port->IER &= ~UART_IER_THRI; @@ -2376,20 +2294,20 @@ static void mxser_transmit_chars(struct mxser_port *port) cnt = port->xmit_cnt; count = port->xmit_fifo_size; do { - outb(port->xmit_buf[port->xmit_tail++], + outb(port->port.xmit_buf[port->xmit_tail++], port->ioaddr + UART_TX); port->xmit_tail = port->xmit_tail & (SERIAL_XMIT_SIZE - 1); if (--port->xmit_cnt <= 0) break; } while (--count > 0); - mxvar_log.txcnt[port->tty->index] += (cnt - port->xmit_cnt); + mxvar_log.txcnt[port->port.tty->index] += (cnt - port->xmit_cnt); port->mon_data.txcnt += (cnt - port->xmit_cnt); port->mon_data.up_txcnt += (cnt - port->xmit_cnt); port->icount.tx += (cnt - port->xmit_cnt); if (port->xmit_cnt < WAKEUP_CHARS) - tty_wakeup(port->tty); + tty_wakeup(port->port.tty); if (port->xmit_cnt <= 0) { port->IER &= ~UART_IER_THRI; @@ -2440,9 +2358,9 @@ static irqreturn_t mxser_interrupt(int irq, void *dev_id) if (iir & UART_IIR_NO_INT) break; iir &= MOXA_MUST_IIR_MASK; - if (!port->tty || - (port->flags & ASYNC_CLOSING) || - !(port->flags & + if (!port->port.tty || + (port->port.flags & ASYNC_CLOSING) || + !(port->port.flags & ASYNC_INITIALIZED)) { status = inb(port->ioaddr + UART_LSR); outb(0x27, port->ioaddr + UART_FCR); @@ -2546,10 +2464,12 @@ static int __devinit mxser_initbrd(struct mxser_board *brd, unsigned int i; int retval; - printk(KERN_INFO "max. baud rate = %d bps.\n", brd->ports[0].max_baud); + printk(KERN_INFO "mxser: max. baud rate = %d bps\n", + brd->ports[0].max_baud); for (i = 0; i < brd->info->nports; i++) { info = &brd->ports[i]; + tty_port_init(&info->port); info->board = brd; info->stop_rx = 0; info->ldisc_stop_rx = 0; @@ -2558,16 +2478,15 @@ static int __devinit mxser_initbrd(struct mxser_board *brd, if (brd->chip_flag != MOXA_OTHER_UART) mxser_enable_must_enchance_mode(info->ioaddr); - info->flags = ASYNC_SHARE_IRQ; + info->port.flags = ASYNC_SHARE_IRQ; info->type = brd->uart_type; process_txrx_fifo(info); info->custom_divisor = info->baud_base * 16; - info->close_delay = 5 * HZ / 10; - info->closing_wait = 30 * HZ; + info->port.close_delay = 5 * HZ / 10; + info->port.closing_wait = 30 * HZ; info->normal_termios = mxvar_sdriver->init_termios; - init_waitqueue_head(&info->open_wait); init_waitqueue_head(&info->delta_msr_wait); memset(&info->mon_data, 0, sizeof(struct mxser_mon)); info->err_shadow = 0; @@ -2629,28 +2548,32 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) irq = regs[9] & 0xF000; irq = irq | (irq >> 4); if (irq != (regs[9] & 0xFF00)) - return MXSER_ERR_IRQ_CONFLIT; + goto err_irqconflict; } else if (brd->info->nports == 4) { irq = regs[9] & 0xF000; irq = irq | (irq >> 4); irq = irq | (irq >> 8); if (irq != regs[9]) - return MXSER_ERR_IRQ_CONFLIT; + goto err_irqconflict; } else if (brd->info->nports == 8) { irq = regs[9] & 0xF000; irq = irq | (irq >> 4); irq = irq | (irq >> 8); if ((irq != regs[9]) || (irq != regs[10])) - return MXSER_ERR_IRQ_CONFLIT; + goto err_irqconflict; } - if (!irq) - return MXSER_ERR_IRQ; + if (!irq) { + printk(KERN_ERR "mxser: interrupt number unset\n"); + return -EIO; + } brd->irq = ((int)(irq & 0xF000) >> 12); for (i = 0; i < 8; i++) brd->ports[i].ioaddr = (int) regs[i + 1] & 0xFFF8; - if ((regs[12] & 0x80) == 0) - return MXSER_ERR_VECTOR; + if ((regs[12] & 0x80) == 0) { + printk(KERN_ERR "mxser: invalid interrupt vector\n"); + return -EIO; + } brd->vector = (int)regs[11]; /* interrupt vector */ if (id == 1) brd->vector_mask = 0x00FF; @@ -2677,13 +2600,26 @@ static int __init mxser_get_ISA_conf(int cap, struct mxser_board *brd) else brd->uart_type = PORT_16450; if (!request_region(brd->ports[0].ioaddr, 8 * brd->info->nports, - "mxser(IO)")) - return MXSER_ERR_IOADDR; + "mxser(IO)")) { + printk(KERN_ERR "mxser: can't request ports I/O region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; + } if (!request_region(brd->vector, 1, "mxser(vector)")) { release_region(brd->ports[0].ioaddr, 8 * brd->info->nports); - return MXSER_ERR_VECTOR; + printk(KERN_ERR "mxser: can't request interrupt vector region: " + "0x%.8lx-0x%.8lx\n", + brd->ports[0].ioaddr, brd->ports[0].ioaddr + + 8 * brd->info->nports - 1); + return -EIO; } return brd->info->nports; + +err_irqconflict: + printk(KERN_ERR "mxser: invalid interrupt number\n"); + return -EIO; } static int __devinit mxser_probe(struct pci_dev *pdev, @@ -2700,20 +2636,20 @@ static int __devinit mxser_probe(struct pci_dev *pdev, break; if (i >= MXSER_BOARDS) { - printk(KERN_ERR "Too many Smartio/Industio family boards found " - "(maximum %d), board not configured\n", MXSER_BOARDS); + dev_err(&pdev->dev, "too many boards found (maximum %d), board " + "not configured\n", MXSER_BOARDS); goto err; } brd = &mxser_boards[i]; brd->idx = i * MXSER_PORTS_PER_BOARD; - printk(KERN_INFO "Found MOXA %s board (BusNo=%d, DevNo=%d)\n", + dev_info(&pdev->dev, "found MOXA %s board (BusNo=%d, DevNo=%d)\n", mxser_cards[ent->driver_data].name, pdev->bus->number, PCI_SLOT(pdev->devfn)); retval = pci_enable_device(pdev); if (retval) { - printk(KERN_ERR "Moxa SmartI/O PCI enable fail !\n"); + dev_err(&pdev->dev, "PCI enable failed\n"); goto err; } @@ -2815,11 +2751,8 @@ static struct pci_driver mxser_driver = { static int __init mxser_module_init(void) { struct mxser_board *brd; - unsigned long cap; - unsigned int i, m, isaloop; - int retval, b; - - pr_debug("Loading module mxser ...\n"); + unsigned int b, i, m; + int retval; mxvar_sdriver = alloc_tty_driver(MXSER_PORTS + 1); if (!mxvar_sdriver) @@ -2849,74 +2782,43 @@ static int __init mxser_module_init(void) goto err_put; } - mxvar_diagflag = 0; - - m = 0; /* Start finding ISA boards here */ - for (isaloop = 0; isaloop < 2; isaloop++) - for (b = 0; b < MXSER_BOARDS && m < MXSER_BOARDS; b++) { - if (!isaloop) - cap = mxserBoardCAP[b]; /* predefined */ - else - cap = ioaddr[b]; /* module param */ + for (m = 0, b = 0; b < MXSER_BOARDS; b++) { + if (!ioaddr[b]) + continue; + + brd = &mxser_boards[m]; + retval = mxser_get_ISA_conf(!ioaddr[b], brd); + if (retval <= 0) { + brd->info = NULL; + continue; + } - if (!cap) - continue; + printk(KERN_INFO "mxser: found MOXA %s board (CAP=0x%lx)\n", + brd->info->name, ioaddr[b]); - brd = &mxser_boards[m]; - retval = mxser_get_ISA_conf(cap, brd); - - if (retval != 0) - printk(KERN_INFO "Found MOXA %s board " - "(CAP=0x%x)\n", - brd->info->name, ioaddr[b]); - - if (retval <= 0) { - if (retval == MXSER_ERR_IRQ) - printk(KERN_ERR "Invalid interrupt " - "number, board not " - "configured\n"); - else if (retval == MXSER_ERR_IRQ_CONFLIT) - printk(KERN_ERR "Invalid interrupt " - "number, board not " - "configured\n"); - else if (retval == MXSER_ERR_VECTOR) - printk(KERN_ERR "Invalid interrupt " - "vector, board not " - "configured\n"); - else if (retval == MXSER_ERR_IOADDR) - printk(KERN_ERR "Invalid I/O address, " - "board not configured\n"); - - brd->info = NULL; - continue; - } - - /* mxser_initbrd will hook ISR. */ - if (mxser_initbrd(brd, NULL) < 0) { - brd->info = NULL; - continue; - } + /* mxser_initbrd will hook ISR. */ + if (mxser_initbrd(brd, NULL) < 0) { + brd->info = NULL; + continue; + } - brd->idx = m * MXSER_PORTS_PER_BOARD; - for (i = 0; i < brd->info->nports; i++) - tty_register_device(mxvar_sdriver, brd->idx + i, - NULL); + brd->idx = m * MXSER_PORTS_PER_BOARD; + for (i = 0; i < brd->info->nports; i++) + tty_register_device(mxvar_sdriver, brd->idx + i, NULL); - m++; - } + m++; + } retval = pci_register_driver(&mxser_driver); if (retval) { - printk(KERN_ERR "Can't register pci driver\n"); + printk(KERN_ERR "mxser: can't register pci driver\n"); if (!m) { retval = -ENODEV; goto err_unr; } /* else: we have some ISA cards under control */ } - pr_debug("Done.\n"); - return 0; err_unr: tty_unregister_driver(mxvar_sdriver); @@ -2929,8 +2831,6 @@ static void __exit mxser_module_exit(void) { unsigned int i, j; - pr_debug("Unloading module mxser ...\n"); - pci_unregister_driver(&mxser_driver); for (i = 0; i < MXSER_BOARDS; i++) /* ISA remains */ @@ -2944,8 +2844,6 @@ static void __exit mxser_module_exit(void) for (i = 0; i < MXSER_BOARDS; i++) if (mxser_boards[i].info != NULL) mxser_release_res(&mxser_boards[i], NULL, 1); - - pr_debug("Done.\n"); } module_init(mxser_module_init); |