diff options
Diffstat (limited to 'drivers/clk/qcom/Kconfig')
| -rw-r--r-- | drivers/clk/qcom/Kconfig | 159 |
1 files changed, 148 insertions, 11 deletions
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig index 74efc82127e1..76e6dee450d5 100644 --- a/drivers/clk/qcom/Kconfig +++ b/drivers/clk/qcom/Kconfig @@ -29,11 +29,11 @@ config QCOM_A53PLL devices. config QCOM_A7PLL - tristate "SDX55 A7 PLL" + tristate "A7 PLL driver for SDX55 and SDX65" help - Support for the A7 PLL on SDX55 devices. It provides the CPU with + Support for the A7 PLL on SDX55 and SDX65 devices. It provides the CPU with frequencies above 1GHz. - Say Y if you want to support higher CPU frequencies on SDX55 + Say Y if you want to support higher CPU frequencies on SDX55 and SDX65 devices. config QCOM_CLK_APCS_MSM8916 @@ -55,13 +55,13 @@ config QCOM_CLK_APCC_MSM8996 drivers for dynamic power management. config QCOM_CLK_APCS_SDX55 - tristate "SDX55 APCS Clock Controller" + tristate "SDX55 and SDX65 APCS Clock Controller" depends on QCOM_APCS_IPC || COMPILE_TEST help - Support for the APCS Clock Controller on SDX55 platform. The + Support for the APCS Clock Controller on SDX55, SDX65 platforms. The APCS is managing the mux and divider which feeds the CPUs. Say Y if you want to support CPU frequency scaling on devices - such as SDX55. + such as SDX55, SDX65. config QCOM_CLK_RPM tristate "RPM based Clock Controller" @@ -166,6 +166,7 @@ config IPQ_LCC_806X config IPQ_GCC_8074 tristate "IPQ8074 Global Clock Controller" + select QCOM_GDSC help Support for global clock controller on ipq8074 devices. Say Y if you want to use peripheral devices such as UART, SPI, @@ -179,6 +180,14 @@ config MSM_GCC_8660 Say Y if you want to use peripheral devices such as UART, SPI, i2c, USB, SD/eMMC, etc. +config MSM_GCC_8909 + tristate "MSM8909 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8909 devices. + Say Y if you want to use devices such as UART, SPI, I2C, USB, + SD/eMMC, display, graphics, camera etc. + config MSM_GCC_8916 tristate "MSM8916 Global Clock Controller" select QCOM_GDSC @@ -265,6 +274,14 @@ config MSM_MMCC_8974 Say Y if you want to support multimedia devices such as display, graphics, video encode/decode, camera, etc. +config MSM_GCC_8976 + tristate "MSM8956/76 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on msm8956/76 devices. + Say Y if you want to use peripheral devices such as UART, SPI, + i2c, USB, SD/eMMC, SATA, PCIe, etc. + config MSM_MMCC_8994 tristate "MSM8994 Multimedia Clock Controller" select MSM_GCC_8994 @@ -332,6 +349,15 @@ config QCM_GCC_2290 Say Y if you want to use multimedia devices or peripheral devices such as UART, SPI, I2C, USB, SD/eMMC etc. +config QCM_DISPCC_2290 + tristate "QCM2290 Display Clock Controller" + select QCM_GCC_2290 + help + Support for the display clock controller on Qualcomm Technologies, Inc + QCM2290 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + config QCS_GCC_404 tristate "QCS404 Global Clock Controller" help @@ -402,6 +428,15 @@ config SC_GCC_8180X Say Y if you want to use peripheral devices such as UART, SPI, I2C, USB, UFS, SDCC, etc. +config SC_GCC_8280XP + tristate "SC8280XP Global Clock Controller" + select QCOM_GDSC + depends on COMMON_CLK_QCOM + help + Support for the global clock controller on SC8280XP devices. + Say Y if you want to use peripheral devices such as UART, SPI, + I2C, USB, UFS, SDCC, etc. + config SC_GPUCC_7180 tristate "SC7180 Graphics Clock Controller" select SC_GCC_7180 @@ -418,6 +453,14 @@ config SC_GPUCC_7280 Say Y if you want to support graphics controller devices and functionality such as 3D graphics. +config SC_GPUCC_8280XP + tristate "SC8280XP Graphics Clock Controller" + select SC_GCC_8280XP + help + Support for the graphics clock controller on SC8280XP devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + config SC_LPASSCC_7280 tristate "SC7280 Low Power Audio Subsystem (LPASS) Clock Controller" select SC_GCC_7280 @@ -435,6 +478,16 @@ config SC_LPASS_CORECC_7180 Say Y if you want to use LPASS clocks and power domains of the LPASS core clock controller. +config SC_LPASS_CORECC_7280 + tristate "SC7280 LPASS Core & Audio Clock Controller" + select SC_GCC_7280 + select QCOM_GDSC + help + Support for the LPASS(Low Power Audio Subsystem) core and audio clock + controller on SC7280 devices. + Say Y if you want to use LPASS clocks and power domains of the LPASS + core clock controller. + config SC_MSS_7180 tristate "SC7180 Modem Clock Controller" select SC_GCC_7180 @@ -508,10 +561,10 @@ config QCS_Q6SSTOP_404 controller to reset the Q6SSTOP subsystem. config SDM_GCC_845 - tristate "SDM845 Global Clock Controller" + tristate "SDM845/SDM670 Global Clock Controller" select QCOM_GDSC help - Support for the global clock controller on SDM845 devices. + Support for the global clock controller on SDM845 and SDM670 devices. Say Y if you want to use peripheral devices such as UART, SPI, i2C, USB, UFS, SDDC, PCIe, etc. @@ -557,6 +610,14 @@ config SDX_GCC_55 Say Y if you want to use peripheral devices such as UART, SPI, I2C, USB, SD/UFS, PCIe etc. +config SDX_GCC_65 + tristate "SDX65 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SDX65 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + config SM_CAMCC_8250 tristate "SM8250 Camera Clock Controller" select SM_GCC_8250 @@ -564,17 +625,61 @@ config SM_CAMCC_8250 Support for the camera clock controller on SM8250 devices. Say Y if you want to support camera devices and camera functionality. +config SM_CAMCC_8450 + tristate "SM8450 Camera Clock Controller" + select SM_GCC_8450 + help + Support for the camera clock controller on SM8450 devices. + Say Y if you want to support camera devices and camera functionality. + +config SM_DISPCC_6115 + tristate "SM6115 Display Clock Controller" + depends on SM_GCC_6115 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6115/SM4250 devices. + Say Y if you want to support display devices and functionality such as + splash screen + +config SM_DISPCC_6125 + tristate "SM6125 Display Clock Controller" + depends on SM_GCC_6125 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6125 devices. + Say Y if you want to support display devices and functionality such as + splash screen + config SM_DISPCC_8250 - tristate "SM8150 and SM8250 Display Clock Controller" - depends on SM_GCC_8150 || SM_GCC_8250 + tristate "SM8150/SM8250/SM8350 Display Clock Controller" + depends on SM_GCC_8150 || SM_GCC_8250 || SM_GCC_8350 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM8150/SM8250/SM8350 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_DISPCC_6350 + tristate "SM6350 Display Clock Controller" + depends on SM_GCC_6350 + help + Support for the display clock controller on Qualcomm Technologies, Inc + SM6350 devices. + Say Y if you want to support display devices and functionality such as + splash screen. + +config SM_DISPCC_8450 + tristate "SM8450 Display Clock Controller" + depends on SM_GCC_8450 help Support for the display clock controller on Qualcomm Technologies, Inc - SM8150 and SM8250 devices. + SM8450 devices. Say Y if you want to support display devices and functionality such as splash screen. config SM_GCC_6115 tristate "SM6115 and SM4250 Global Clock Controller" + select QCOM_GDSC help Support for the global clock controller on SM6115 and SM4250 devices. Say Y if you want to use peripheral devices such as UART, SPI, @@ -595,6 +700,14 @@ config SM_GCC_6350 Say Y if you want to use peripheral devices such as UART, SPI, I2C, USB, SD/UFS, PCIe etc. +config SM_GCC_6375 + tristate "SM6375 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM6375 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS etc. + config SM_GCC_8150 tristate "SM8150 Global Clock Controller" help @@ -618,6 +731,22 @@ config SM_GCC_8350 Say Y if you want to use peripheral devices such as UART, SPI, I2C, USB, SD/UFS, PCIe etc. +config SM_GCC_8450 + tristate "SM8450 Global Clock Controller" + select QCOM_GDSC + help + Support for the global clock controller on SM8450 devices. + Say Y if you want to use peripheral devices such as UART, + SPI, I2C, USB, SD/UFS, PCIe etc. + +config SM_GPUCC_6350 + tristate "SM6350 Graphics Clock Controller" + select SM_GCC_6350 + help + Support for the graphics clock controller on SM6350 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + config SM_GPUCC_8150 tristate "SM8150 Graphics Clock Controller" select SM_GCC_8150 @@ -634,6 +763,14 @@ config SM_GPUCC_8250 Say Y if you want to support graphics controller devices and functionality such as 3D graphics. +config SM_GPUCC_8350 + tristate "SM8350 Graphics Clock Controller" + select SM_GCC_8350 + help + Support for the graphics clock controller on SM8350 devices. + Say Y if you want to support graphics controller devices and + functionality such as 3D graphics. + config SM_VIDEOCC_8150 tristate "SM8150 Video Clock Controller" select SM_GCC_8150 |