diff options
Diffstat (limited to 'drivers/crypto/ux500/cryp/cryp.h')
| -rw-r--r-- | drivers/crypto/ux500/cryp/cryp.h | 308 |
1 files changed, 308 insertions, 0 deletions
diff --git a/drivers/crypto/ux500/cryp/cryp.h b/drivers/crypto/ux500/cryp/cryp.h new file mode 100644 index 000000000000..14cfd05b777a --- /dev/null +++ b/drivers/crypto/ux500/cryp/cryp.h @@ -0,0 +1,308 @@ +/** + * Copyright (C) ST-Ericsson SA 2010 + * Author: Shujuan Chen <shujuan.chen@stericsson.com> for ST-Ericsson. + * Author: Jonas Linde <jonas.linde@stericsson.com> for ST-Ericsson. + * Author: Joakim Bech <joakim.xx.bech@stericsson.com> for ST-Ericsson. + * Author: Berne Hebark <berne.herbark@stericsson.com> for ST-Ericsson. + * Author: Niklas Hernaeus <niklas.hernaeus@stericsson.com> for ST-Ericsson. + * License terms: GNU General Public License (GPL) version 2 + */ + +#ifndef _CRYP_H_ +#define _CRYP_H_ + +#include <linux/completion.h> +#include <linux/dmaengine.h> +#include <linux/klist.h> +#include <linux/mutex.h> + +#define DEV_DBG_NAME "crypX crypX:" + +/* CRYP enable/disable */ +enum cryp_crypen { + CRYP_CRYPEN_DISABLE = 0, + CRYP_CRYPEN_ENABLE = 1 +}; + +/* CRYP Start Computation enable/disable */ +enum cryp_start { + CRYP_START_DISABLE = 0, + CRYP_START_ENABLE = 1 +}; + +/* CRYP Init Signal enable/disable */ +enum cryp_init { + CRYP_INIT_DISABLE = 0, + CRYP_INIT_ENABLE = 1 +}; + +/* Cryp State enable/disable */ +enum cryp_state { + CRYP_STATE_DISABLE = 0, + CRYP_STATE_ENABLE = 1 +}; + +/* Key preparation bit enable */ +enum cryp_key_prep { + KSE_DISABLED = 0, + KSE_ENABLED = 1 +}; + +/* Key size for AES */ +#define CRYP_KEY_SIZE_128 (0) +#define CRYP_KEY_SIZE_192 (1) +#define CRYP_KEY_SIZE_256 (2) + +/* AES modes */ +enum cryp_algo_mode { + CRYP_ALGO_TDES_ECB, + CRYP_ALGO_TDES_CBC, + CRYP_ALGO_DES_ECB, + CRYP_ALGO_DES_CBC, + CRYP_ALGO_AES_ECB, + CRYP_ALGO_AES_CBC, + CRYP_ALGO_AES_CTR, + CRYP_ALGO_AES_XTS +}; + +/* Cryp Encryption or Decryption */ +enum cryp_algorithm_dir { + CRYP_ALGORITHM_ENCRYPT, + CRYP_ALGORITHM_DECRYPT +}; + +/* Hardware access method */ +enum cryp_mode { + CRYP_MODE_POLLING, + CRYP_MODE_INTERRUPT, + CRYP_MODE_DMA +}; + +/** + * struct cryp_config - + * @keysize: Key size for AES + * @algomode: AES modes + * @algodir: Cryp Encryption or Decryption + * + * CRYP configuration structure to be passed to set configuration + */ +struct cryp_config { + int keysize; + enum cryp_algo_mode algomode; + enum cryp_algorithm_dir algodir; +}; + +/** + * struct cryp_protection_config - + * @privilege_access: Privileged cryp state enable/disable + * @secure_access: Secure cryp state enable/disable + * + * Protection configuration structure for setting privilage access + */ +struct cryp_protection_config { + enum cryp_state privilege_access; + enum cryp_state secure_access; +}; + +/* Cryp status */ +enum cryp_status_id { + CRYP_STATUS_BUSY = 0x10, + CRYP_STATUS_OUTPUT_FIFO_FULL = 0x08, + CRYP_STATUS_OUTPUT_FIFO_NOT_EMPTY = 0x04, + CRYP_STATUS_INPUT_FIFO_NOT_FULL = 0x02, + CRYP_STATUS_INPUT_FIFO_EMPTY = 0x01 +}; + +/* Cryp DMA interface */ +enum cryp_dma_req_type { + CRYP_DMA_DISABLE_BOTH, + CRYP_DMA_ENABLE_IN_DATA, + CRYP_DMA_ENABLE_OUT_DATA, + CRYP_DMA_ENABLE_BOTH_DIRECTIONS +}; + +enum cryp_dma_channel { + CRYP_DMA_RX = 0, + CRYP_DMA_TX +}; + +/* Key registers */ +enum cryp_key_reg_index { + CRYP_KEY_REG_1, + CRYP_KEY_REG_2, + CRYP_KEY_REG_3, + CRYP_KEY_REG_4 +}; + +/* Key register left and right */ +struct cryp_key_value { + u32 key_value_left; + u32 key_value_right; +}; + +/* Cryp Initialization structure */ +enum cryp_init_vector_index { + CRYP_INIT_VECTOR_INDEX_0, + CRYP_INIT_VECTOR_INDEX_1 +}; + +/* struct cryp_init_vector_value - + * @init_value_left + * @init_value_right + * */ +struct cryp_init_vector_value { + u32 init_value_left; + u32 init_value_right; +}; + +/** + * struct cryp_device_context - structure for a cryp context. + * @cr: control register + * @dmacr: DMA control register + * @imsc: Interrupt mask set/clear register + * @key_1_l: Key 1l register + * @key_1_r: Key 1r register + * @key_2_l: Key 2l register + * @key_2_r: Key 2r register + * @key_3_l: Key 3l register + * @key_3_r: Key 3r register + * @key_4_l: Key 4l register + * @key_4_r: Key 4r register + * @init_vect_0_l: Initialization vector 0l register + * @init_vect_0_r: Initialization vector 0r register + * @init_vect_1_l: Initialization vector 1l register + * @init_vect_1_r: Initialization vector 0r register + * @din: Data in register + * @dout: Data out register + * + * CRYP power management specifc structure. + */ +struct cryp_device_context { + u32 cr; + u32 dmacr; + u32 imsc; + + u32 key_1_l; + u32 key_1_r; + u32 key_2_l; + u32 key_2_r; + u32 key_3_l; + u32 key_3_r; + u32 key_4_l; + u32 key_4_r; + + u32 init_vect_0_l; + u32 init_vect_0_r; + u32 init_vect_1_l; + u32 init_vect_1_r; + + u32 din; + u32 dout; +}; + +struct cryp_dma { + dma_cap_mask_t mask; + struct completion cryp_dma_complete; + struct dma_chan *chan_cryp2mem; + struct dma_chan *chan_mem2cryp; + struct stedma40_chan_cfg *cfg_cryp2mem; + struct stedma40_chan_cfg *cfg_mem2cryp; + int sg_src_len; + int sg_dst_len; + struct scatterlist *sg_src; + struct scatterlist *sg_dst; + int nents_src; + int nents_dst; +}; + +/** + * struct cryp_device_data - structure for a cryp device. + * @base: Pointer to the hardware base address. + * @dev: Pointer to the devices dev structure. + * @clk: Pointer to the device's clock control. + * @pwr_regulator: Pointer to the device's power control. + * @power_status: Current status of the power. + * @ctx_lock: Lock for current_ctx. + * @current_ctx: Pointer to the currently allocated context. + * @list_node: For inclusion into a klist. + * @dma: The dma structure holding channel configuration. + * @power_state: TRUE = power state on, FALSE = power state off. + * @power_state_spinlock: Spinlock for power_state. + * @restore_dev_ctx: TRUE = saved ctx, FALSE = no saved ctx. + */ +struct cryp_device_data { + struct cryp_register __iomem *base; + struct device *dev; + struct clk *clk; + struct regulator *pwr_regulator; + int power_status; + struct spinlock ctx_lock; + struct cryp_ctx *current_ctx; + struct klist_node list_node; + struct cryp_dma dma; + bool power_state; + struct spinlock power_state_spinlock; + bool restore_dev_ctx; +}; + +void cryp_wait_until_done(struct cryp_device_data *device_data); + +/* Initialization functions */ + +int cryp_check(struct cryp_device_data *device_data); + +void cryp_activity(struct cryp_device_data *device_data, + enum cryp_crypen cryp_crypen); + +void cryp_flush_inoutfifo(struct cryp_device_data *device_data); + +int cryp_set_configuration(struct cryp_device_data *device_data, + struct cryp_config *cryp_config, + u32 *control_register); + +void cryp_configure_for_dma(struct cryp_device_data *device_data, + enum cryp_dma_req_type dma_req); + +int cryp_configure_key_values(struct cryp_device_data *device_data, + enum cryp_key_reg_index key_reg_index, + struct cryp_key_value key_value); + +int cryp_configure_init_vector(struct cryp_device_data *device_data, + enum cryp_init_vector_index + init_vector_index, + struct cryp_init_vector_value + init_vector_value); + +int cryp_configure_protection(struct cryp_device_data *device_data, + struct cryp_protection_config *p_protect_config); + +/* Power management funtions */ +void cryp_save_device_context(struct cryp_device_data *device_data, + struct cryp_device_context *ctx, + int cryp_mode); + +void cryp_restore_device_context(struct cryp_device_data *device_data, + struct cryp_device_context *ctx); + +/* Data transfer and status bits. */ +int cryp_is_logic_busy(struct cryp_device_data *device_data); + +int cryp_get_status(struct cryp_device_data *device_data); + +/** + * cryp_write_indata - This routine writes 32 bit data into the data input + * register of the cryptography IP. + * @device_data: Pointer to the device data struct for base address. + * @write_data: Data to write. + */ +int cryp_write_indata(struct cryp_device_data *device_data, u32 write_data); + +/** + * cryp_read_outdata - This routine reads the data from the data output + * register of the CRYP logic + * @device_data: Pointer to the device data struct for base address. + * @read_data: Read the data from the output FIFO. + */ +int cryp_read_outdata(struct cryp_device_data *device_data, u32 *read_data); + +#endif /* _CRYP_H_ */ |