1 files changed, 124 insertions, 122 deletions

diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c
index e6d7228b1479..196a7378d332 100644
--- a/drivers/dma/amba-pl08x.c
+++ b/drivers/dma/amba-pl08x.c
@@ -156,14 +156,10 @@ struct pl08x_driver_data {
 #define PL08X_BOUNDARY_SHIFT		(10)	/* 1KB 0x400 */
 #define PL08X_BOUNDARY_SIZE		(1 << PL08X_BOUNDARY_SHIFT)
 
-/* Minimum period between work queue runs */
-#define PL08X_WQ_PERIODMIN	20
-
 /* Size (bytes) of each LLI buffer allocated for one transfer */
 # define PL08X_LLI_TSFR_SIZE	0x2000
 
 /* Maximum times we call dma_pool_alloc on this pool without freeing */
-#define PL08X_MAX_ALLOCS	0x40
 #define MAX_NUM_TSFR_LLIS	(PL08X_LLI_TSFR_SIZE/sizeof(struct pl08x_lli))
 #define PL08X_ALIGN		8
 
@@ -495,10 +491,10 @@ static inline u32 pl08x_cctl_bits(u32 cctl, u8 srcwidth, u8 dstwidth,
 
 struct pl08x_lli_build_data {
 	struct pl08x_txd *txd;
-	struct pl08x_driver_data *pl08x;
 	struct pl08x_bus_data srcbus;
 	struct pl08x_bus_data dstbus;
 	size_t remainder;
+	u32 lli_bus;
 };
 
 /*
@@ -551,8 +547,7 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd,
 	llis_va[num_llis].src = bd->srcbus.addr;
 	llis_va[num_llis].dst = bd->dstbus.addr;
 	llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli);
-	if (bd->pl08x->lli_buses & PL08X_AHB2)
-		llis_va[num_llis].lli |= PL080_LLI_LM_AHB2;
+	llis_va[num_llis].lli |= bd->lli_bus;
 
 	if (cctl & PL080_CONTROL_SRC_INCR)
 		bd->srcbus.addr += len;
@@ -605,9 +600,9 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 	cctl = txd->cctl;
 
 	bd.txd = txd;
-	bd.pl08x = pl08x;
 	bd.srcbus.addr = txd->src_addr;
 	bd.dstbus.addr = txd->dst_addr;
+	bd.lli_bus = (pl08x->lli_buses & PL08X_AHB2) ? PL080_LLI_LM_AHB2 : 0;
 
 	/* Find maximum width of the source bus */
 	bd.srcbus.maxwidth =
@@ -622,25 +617,15 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 	/* Set up the bus widths to the maximum */
 	bd.srcbus.buswidth = bd.srcbus.maxwidth;
 	bd.dstbus.buswidth = bd.dstbus.maxwidth;
-	dev_vdbg(&pl08x->adev->dev,
-		 "%s source bus is %d bytes wide, dest bus is %d bytes wide\n",
-		 __func__, bd.srcbus.buswidth, bd.dstbus.buswidth);
-
 
 	/*
 	 * Bytes transferred == tsize * MIN(buswidths), not max(buswidths)
 	 */
 	max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) *
 		PL080_CONTROL_TRANSFER_SIZE_MASK;
-	dev_vdbg(&pl08x->adev->dev,
-		 "%s max bytes per lli = %zu\n",
-		 __func__, max_bytes_per_lli);
 
 	/* We need to count this down to zero */
 	bd.remainder = txd->len;
-	dev_vdbg(&pl08x->adev->dev,
-		 "%s remainder = %zu\n",
-		 __func__, bd.remainder);
 
 	/*
 	 * Choose bus to align to
@@ -649,6 +634,16 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 	 */
 	pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl);
 
+	dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n",
+		 bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "",
+		 bd.srcbus.buswidth,
+		 bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "",
+		 bd.dstbus.buswidth,
+		 bd.remainder, max_bytes_per_lli);
+	dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n",
+		 mbus == &bd.srcbus ? "src" : "dst",
+		 sbus == &bd.srcbus ? "src" : "dst");
+
 	if (txd->len < mbus->buswidth) {
 		/* Less than a bus width available - send as single bytes */
 		while (bd.remainder) {
@@ -840,15 +835,14 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x,
 	{
 		int i;
 
+		dev_vdbg(&pl08x->adev->dev,
+			 "%-3s %-9s  %-10s %-10s %-10s %s\n",
+			 "lli", "", "csrc", "cdst", "clli", "cctl");
 		for (i = 0; i < num_llis; i++) {
 			dev_vdbg(&pl08x->adev->dev,
-				 "lli %d @%p: csrc=0x%08x, cdst=0x%08x, cctl=0x%08x, clli=0x%08x\n",
-				 i,
-				 &llis_va[i],
-				 llis_va[i].src,
-				 llis_va[i].dst,
-				 llis_va[i].cctl,
-				 llis_va[i].lli
+				 "%3d @%p: 0x%08x 0x%08x 0x%08x 0x%08x\n",
+				 i, &llis_va[i], llis_va[i].src,
+				 llis_va[i].dst, llis_va[i].lli, llis_va[i].cctl
 				);
 		}
 	}
@@ -1054,64 +1048,105 @@ pl08x_dma_tx_status(struct dma_chan *chan,
 
 /* PrimeCell DMA extension */
 struct burst_table {
-	int burstwords;
+	u32 burstwords;
 	u32 reg;
 };
 
 static const struct burst_table burst_sizes[] = {
 	{
 		.burstwords = 256,
-		.reg = (PL080_BSIZE_256 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_256 << PL080_CONTROL_DB_SIZE_SHIFT),
+		.reg = PL080_BSIZE_256,
 	},
 	{
 		.burstwords = 128,
-		.reg = (PL080_BSIZE_128 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_128 << PL080_CONTROL_DB_SIZE_SHIFT),
+		.reg = PL080_BSIZE_128,
 	},
 	{
 		.burstwords = 64,
-		.reg = (PL080_BSIZE_64 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_64 << PL080_CONTROL_DB_SIZE_SHIFT),
+		.reg = PL080_BSIZE_64,
 	},
 	{
 		.burstwords = 32,
-		.reg = (PL080_BSIZE_32 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_32 << PL080_CONTROL_DB_SIZE_SHIFT),
+		.reg = PL080_BSIZE_32,
 	},
 	{
 		.burstwords = 16,
-		.reg = (PL080_BSIZE_16 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_16 << PL080_CONTROL_DB_SIZE_SHIFT),
+		.reg = PL080_BSIZE_16,
 	},
 	{
 		.burstwords = 8,
-		.reg = (PL080_BSIZE_8 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_8 << PL080_CONTROL_DB_SIZE_SHIFT),
+		.reg = PL080_BSIZE_8,
 	},
 	{
 		.burstwords = 4,
-		.reg = (PL080_BSIZE_4 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_4 << PL080_CONTROL_DB_SIZE_SHIFT),
+		.reg = PL080_BSIZE_4,
 	},
 	{
-		.burstwords = 1,
-		.reg = (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT),
+		.burstwords = 0,
+		.reg = PL080_BSIZE_1,
 	},
 };
 
+/*
+ * Given the source and destination available bus masks, select which
+ * will be routed to each port.  We try to have source and destination
+ * on separate ports, but always respect the allowable settings.
+ */
+static u32 pl08x_select_bus(u8 src, u8 dst)
+{
+	u32 cctl = 0;
+
+	if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
+		cctl |= PL080_CONTROL_DST_AHB2;
+	if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
+		cctl |= PL080_CONTROL_SRC_AHB2;
+
+	return cctl;
+}
+
+static u32 pl08x_cctl(u32 cctl)
+{
+	cctl &= ~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
+		  PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR |
+		  PL080_CONTROL_PROT_MASK);
+
+	/* Access the cell in privileged mode, non-bufferable, non-cacheable */
+	return cctl | PL080_CONTROL_PROT_SYS;
+}
+
+static u32 pl08x_width(enum dma_slave_buswidth width)
+{
+	switch (width) {
+	case DMA_SLAVE_BUSWIDTH_1_BYTE:
+		return PL080_WIDTH_8BIT;
+	case DMA_SLAVE_BUSWIDTH_2_BYTES:
+		return PL080_WIDTH_16BIT;
+	case DMA_SLAVE_BUSWIDTH_4_BYTES:
+		return PL080_WIDTH_32BIT;
+	default:
+		return ~0;
+	}
+}
+
+static u32 pl08x_burst(u32 maxburst)
+{
+	int i;
+
+	for (i = 0; i < ARRAY_SIZE(burst_sizes); i++)
+		if (burst_sizes[i].burstwords <= maxburst)
+			break;
+
+	return burst_sizes[i].reg;
+}
+
 static int dma_set_runtime_config(struct dma_chan *chan,
 				  struct dma_slave_config *config)
 {
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	struct pl08x_driver_data *pl08x = plchan->host;
-	struct pl08x_channel_data *cd = plchan->cd;
 	enum dma_slave_buswidth addr_width;
-	dma_addr_t addr;
-	u32 maxburst;
+	u32 width, burst, maxburst;
 	u32 cctl = 0;
-	int i;
 
 	if (!plchan->slave)
 		return -EINVAL;
@@ -1119,11 +1154,9 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 	/* Transfer direction */
 	plchan->runtime_direction = config->direction;
 	if (config->direction == DMA_TO_DEVICE) {
-		addr = config->dst_addr;
 		addr_width = config->dst_addr_width;
 		maxburst = config->dst_maxburst;
 	} else if (config->direction == DMA_FROM_DEVICE) {
-		addr = config->src_addr;
 		addr_width = config->src_addr_width;
 		maxburst = config->src_maxburst;
 	} else {
@@ -1132,46 +1165,40 @@ static int dma_set_runtime_config(struct dma_chan *chan,
 		return -EINVAL;
 	}
 
-	switch (addr_width) {
-	case DMA_SLAVE_BUSWIDTH_1_BYTE:
-		cctl |= (PL080_WIDTH_8BIT << PL080_CONTROL_SWIDTH_SHIFT) |
-			(PL080_WIDTH_8BIT << PL080_CONTROL_DWIDTH_SHIFT);
-		break;
-	case DMA_SLAVE_BUSWIDTH_2_BYTES:
-		cctl |= (PL080_WIDTH_16BIT << PL080_CONTROL_SWIDTH_SHIFT) |
-			(PL080_WIDTH_16BIT << PL080_CONTROL_DWIDTH_SHIFT);
-		break;
-	case DMA_SLAVE_BUSWIDTH_4_BYTES:
-		cctl |= (PL080_WIDTH_32BIT << PL080_CONTROL_SWIDTH_SHIFT) |
-			(PL080_WIDTH_32BIT << PL080_CONTROL_DWIDTH_SHIFT);
-		break;
-	default:
+	width = pl08x_width(addr_width);
+	if (width == ~0) {
 		dev_err(&pl08x->adev->dev,
 			"bad runtime_config: alien address width\n");
 		return -EINVAL;
 	}
 
+	cctl |= width << PL080_CONTROL_SWIDTH_SHIFT;
+	cctl |= width << PL080_CONTROL_DWIDTH_SHIFT;
+
 	/*
-	 * Now decide on a maxburst:
 	 * If this channel will only request single transfers, set this
 	 * down to ONE element.  Also select one element if no maxburst
 	 * is specified.
 	 */
-	if (plchan->cd->single || maxburst == 0) {
-		cctl |= (PL080_BSIZE_1 << PL080_CONTROL_SB_SIZE_SHIFT) |
-			(PL080_BSIZE_1 << PL080_CONTROL_DB_SIZE_SHIFT);
+	if (plchan->cd->single)
+		maxburst = 1;
+
+	burst = pl08x_burst(maxburst);
+	cctl |= burst << PL080_CONTROL_SB_SIZE_SHIFT;
+	cctl |= burst << PL080_CONTROL_DB_SIZE_SHIFT;
+
+	if (plchan->runtime_direction == DMA_FROM_DEVICE) {
+		plchan->src_addr = config->src_addr;
+		plchan->src_cctl = pl08x_cctl(cctl) | PL080_CONTROL_DST_INCR |
+			pl08x_select_bus(plchan->cd->periph_buses,
+					 pl08x->mem_buses);
 	} else {
-		for (i = 0; i < ARRAY_SIZE(burst_sizes); i++)
-			if (burst_sizes[i].burstwords <= maxburst)
-				break;
-		cctl |= burst_sizes[i].reg;
+		plchan->dst_addr = config->dst_addr;
+		plchan->dst_cctl = pl08x_cctl(cctl) | PL080_CONTROL_SRC_INCR |
+			pl08x_select_bus(pl08x->mem_buses,
+					 plchan->cd->periph_buses);
 	}
 
-	plchan->runtime_addr = addr;
-
-	/* Modify the default channel data to fit PrimeCell request */
-	cd->cctl = cctl;
-
 	dev_dbg(&pl08x->adev->dev,
 		"configured channel %s (%s) for %s, data width %d, "
 		"maxburst %d words, LE, CCTL=0x%08x\n",
@@ -1270,23 +1297,6 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan,
 	return 0;
 }
 
-/*
- * Given the source and destination available bus masks, select which
- * will be routed to each port.  We try to have source and destination
- * on separate ports, but always respect the allowable settings.
- */
-static u32 pl08x_select_bus(struct pl08x_driver_data *pl08x, u8 src, u8 dst)
-{
-	u32 cctl = 0;
-
-	if (!(dst & PL08X_AHB1) || ((dst & PL08X_AHB2) && (src & PL08X_AHB1)))
-		cctl |= PL080_CONTROL_DST_AHB2;
-	if (!(src & PL08X_AHB1) || ((src & PL08X_AHB2) && !(dst & PL08X_AHB2)))
-		cctl |= PL080_CONTROL_SRC_AHB2;
-
-	return cctl;
-}
-
 static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan,
 	unsigned long flags)
 {
@@ -1338,8 +1348,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_memcpy(
 	txd->cctl |= PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR;
 
 	if (pl08x->vd->dualmaster)
-		txd->cctl |= pl08x_select_bus(pl08x,
-					pl08x->mem_buses, pl08x->mem_buses);
+		txd->cctl |= pl08x_select_bus(pl08x->mem_buses,
+					      pl08x->mem_buses);
 
 	ret = pl08x_prep_channel_resources(plchan, txd);
 	if (ret)
@@ -1356,7 +1366,6 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	struct pl08x_dma_chan *plchan = to_pl08x_chan(chan);
 	struct pl08x_driver_data *pl08x = plchan->host;
 	struct pl08x_txd *txd;
-	u8 src_buses, dst_buses;
 	int ret;
 
 	/*
@@ -1390,42 +1399,22 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg(
 	txd->direction = direction;
 	txd->len = sgl->length;
 
-	txd->cctl = plchan->cd->cctl &
-			~(PL080_CONTROL_SRC_AHB2 | PL080_CONTROL_DST_AHB2 |
-			  PL080_CONTROL_SRC_INCR | PL080_CONTROL_DST_INCR |
-			  PL080_CONTROL_PROT_MASK);
-
-	/* Access the cell in privileged mode, non-bufferable, non-cacheable */
-	txd->cctl |= PL080_CONTROL_PROT_SYS;
-
 	if (direction == DMA_TO_DEVICE) {
 		txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		txd->cctl |= PL080_CONTROL_SRC_INCR;
+		txd->cctl = plchan->dst_cctl;
 		txd->src_addr = sgl->dma_address;
-		if (plchan->runtime_addr)
-			txd->dst_addr = plchan->runtime_addr;
-		else
-			txd->dst_addr = plchan->cd->addr;
-		src_buses = pl08x->mem_buses;
-		dst_buses = plchan->cd->periph_buses;
+		txd->dst_addr = plchan->dst_addr;
 	} else if (direction == DMA_FROM_DEVICE) {
 		txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT;
-		txd->cctl |= PL080_CONTROL_DST_INCR;
-		if (plchan->runtime_addr)
-			txd->src_addr = plchan->runtime_addr;
-		else
-			txd->src_addr = plchan->cd->addr;
+		txd->cctl = plchan->src_cctl;
+		txd->src_addr = plchan->src_addr;
 		txd->dst_addr = sgl->dma_address;
-		src_buses = plchan->cd->periph_buses;
-		dst_buses = pl08x->mem_buses;
 	} else {
 		dev_err(&pl08x->adev->dev,
 			"%s direction unsupported\n", __func__);
 		return NULL;
 	}
 
-	txd->cctl |= pl08x_select_bus(pl08x, src_buses, dst_buses);
-
 	ret = pl08x_prep_channel_resources(plchan, txd);
 	if (ret)
 		return NULL;
@@ -1676,6 +1665,20 @@ static irqreturn_t pl08x_irq(int irq, void *dev)
 	return mask ? IRQ_HANDLED : IRQ_NONE;
 }
 
+static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan)
+{
+	u32 cctl = pl08x_cctl(chan->cd->cctl);
+
+	chan->slave = true;
+	chan->name = chan->cd->bus_id;
+	chan->src_addr = chan->cd->addr;
+	chan->dst_addr = chan->cd->addr;
+	chan->src_cctl = cctl | PL080_CONTROL_DST_INCR |
+		pl08x_select_bus(chan->cd->periph_buses, chan->host->mem_buses);
+	chan->dst_cctl = cctl | PL080_CONTROL_SRC_INCR |
+		pl08x_select_bus(chan->host->mem_buses, chan->cd->periph_buses);
+}
+
 /*
  * Initialise the DMAC memcpy/slave channels.
  * Make a local wrapper to hold required data
@@ -1707,9 +1710,8 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x,
 		chan->state = PL08X_CHAN_IDLE;
 
 		if (slave) {
-			chan->slave = true;
-			chan->name = pl08x->pd->slave_channels[i].bus_id;
 			chan->cd = &pl08x->pd->slave_channels[i];
+			pl08x_dma_slave_init(chan);
 		} else {
 			chan->cd = &pl08x->pd->memcpy_channel;
 			chan->name = kasprintf(GFP_KERNEL, "memcpy%d", i);