diff options
Diffstat (limited to 'drivers/extcon')
-rw-r--r-- | drivers/extcon/extcon-adc-jack.c | 4 | ||||
-rw-r--r-- | drivers/extcon/extcon-arizona.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-axp288.c | 49 | ||||
-rw-r--r-- | drivers/extcon/extcon-gpio.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-intel-cht-wc.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-intel-int3496.c | 5 | ||||
-rw-r--r-- | drivers/extcon/extcon-max14577.c | 4 | ||||
-rw-r--r-- | drivers/extcon/extcon-max3355.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-max77693.c | 4 | ||||
-rw-r--r-- | drivers/extcon/extcon-max77843.c | 95 | ||||
-rw-r--r-- | drivers/extcon/extcon-max8997.c | 4 | ||||
-rw-r--r-- | drivers/extcon/extcon-qcom-spmi-misc.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-rt8973a.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-sm5502.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-usb-gpio.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon-usbc-cros-ec.c | 144 | ||||
-rw-r--r-- | drivers/extcon/extcon.c | 2 | ||||
-rw-r--r-- | drivers/extcon/extcon.h | 2 |
18 files changed, 249 insertions, 80 deletions
diff --git a/drivers/extcon/extcon-adc-jack.c b/drivers/extcon/extcon-adc-jack.c index 6f6537ab0a79..18026354c332 100644 --- a/drivers/extcon/extcon-adc-jack.c +++ b/drivers/extcon/extcon-adc-jack.c @@ -26,7 +26,7 @@ #include <linux/workqueue.h> #include <linux/iio/consumer.h> #include <linux/extcon/extcon-adc-jack.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> /** * struct adc_jack_data - internal data for adc_jack device driver @@ -144,7 +144,7 @@ static int adc_jack_probe(struct platform_device *pdev) return err; data->irq = platform_get_irq(pdev, 0); - if (!data->irq) { + if (data->irq < 0) { dev_err(&pdev->dev, "platform_get_irq failed\n"); return -ENODEV; } diff --git a/drivers/extcon/extcon-arizona.c b/drivers/extcon/extcon-arizona.c index f84da4a17724..da0e9bc4262f 100644 --- a/drivers/extcon/extcon-arizona.c +++ b/drivers/extcon/extcon-arizona.c @@ -27,7 +27,7 @@ #include <linux/pm_runtime.h> #include <linux/property.h> #include <linux/regulator/consumer.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <sound/soc.h> diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index f4fd03e58e37..3ec4c715e240 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -22,10 +22,8 @@ #include <linux/platform_device.h> #include <linux/property.h> #include <linux/notifier.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/regmap.h> -#include <linux/gpio.h> -#include <linux/gpio/consumer.h> #include <linux/mfd/axp20x.h> /* Power source status register */ @@ -79,11 +77,6 @@ enum axp288_extcon_reg { AXP288_BC_DET_STAT_REG = 0x2f, }; -enum axp288_mux_select { - EXTCON_GPIO_MUX_SEL_PMIC = 0, - EXTCON_GPIO_MUX_SEL_SOC, -}; - enum axp288_extcon_irq { VBUS_FALLING_IRQ = 0, VBUS_RISING_IRQ, @@ -104,15 +97,13 @@ struct axp288_extcon_info { struct device *dev; struct regmap *regmap; struct regmap_irq_chip_data *regmap_irqc; - struct gpio_desc *gpio_mux_cntl; int irq[EXTCON_IRQ_END]; struct extcon_dev *edev; - struct notifier_block extcon_nb; unsigned int previous_cable; }; /* Power up/down reason string array */ -static char *axp288_pwr_up_down_info[] = { +static const char * const axp288_pwr_up_down_info[] = { "Last wake caused by user pressing the power button", "Last wake caused by a charger insertion", "Last wake caused by a battery insertion", @@ -130,7 +121,7 @@ static char *axp288_pwr_up_down_info[] = { */ static void axp288_extcon_log_rsi(struct axp288_extcon_info *info) { - char **rsi; + const char * const *rsi; unsigned int val, i, clear_mask = 0; int ret; @@ -192,20 +183,11 @@ static int axp288_handle_chrg_det_event(struct axp288_extcon_info *info) cable = EXTCON_CHG_USB_DCP; break; default: - dev_warn(info->dev, - "disconnect or unknown or ID event\n"); + dev_warn(info->dev, "unknown (reserved) bc detect result\n"); + cable = EXTCON_CHG_USB_SDP; } no_vbus: - /* - * If VBUS is absent Connect D+/D- lines to PMIC for BC - * detection. Else connect them to SOC for USB communication. - */ - if (info->gpio_mux_cntl) - gpiod_set_value(info->gpio_mux_cntl, - vbus_attach ? EXTCON_GPIO_MUX_SEL_SOC - : EXTCON_GPIO_MUX_SEL_PMIC); - extcon_set_state_sync(info->edev, info->previous_cable, false); if (info->previous_cable == EXTCON_CHG_USB_SDP) extcon_set_state_sync(info->edev, EXTCON_USB, false); @@ -253,8 +235,7 @@ static int axp288_extcon_probe(struct platform_device *pdev) { struct axp288_extcon_info *info; struct axp20x_dev *axp20x = dev_get_drvdata(pdev->dev.parent); - struct axp288_extcon_pdata *pdata = pdev->dev.platform_data; - int ret, i, pirq, gpio; + int ret, i, pirq; info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (!info) @@ -264,8 +245,6 @@ static int axp288_extcon_probe(struct platform_device *pdev) info->regmap = axp20x->regmap; info->regmap_irqc = axp20x->regmap_irqc; info->previous_cable = EXTCON_NONE; - if (pdata) - info->gpio_mux_cntl = pdata->gpio_mux_cntl; platform_set_drvdata(pdev, info); @@ -286,21 +265,11 @@ static int axp288_extcon_probe(struct platform_device *pdev) return ret; } - /* Set up gpio control for USB Mux */ - if (info->gpio_mux_cntl) { - gpio = desc_to_gpio(info->gpio_mux_cntl); - ret = devm_gpio_request(&pdev->dev, gpio, "USB_MUX"); - if (ret < 0) { - dev_err(&pdev->dev, - "failed to request the gpio=%d\n", gpio); - return ret; - } - gpiod_direction_output(info->gpio_mux_cntl, - EXTCON_GPIO_MUX_SEL_PMIC); - } - for (i = 0; i < EXTCON_IRQ_END; i++) { pirq = platform_get_irq(pdev, i); + if (pirq < 0) + return pirq; + info->irq[i] = regmap_irq_get_virq(info->regmap_irqc, pirq); if (info->irq[i] < 0) { dev_err(&pdev->dev, diff --git a/drivers/extcon/extcon-gpio.c b/drivers/extcon/extcon-gpio.c index ebed22f22d75..ab770adcca7e 100644 --- a/drivers/extcon/extcon-gpio.c +++ b/drivers/extcon/extcon-gpio.c @@ -17,7 +17,7 @@ * GNU General Public License for more details. */ -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/extcon/extcon-gpio.h> #include <linux/gpio.h> #include <linux/gpio/consumer.h> diff --git a/drivers/extcon/extcon-intel-cht-wc.c b/drivers/extcon/extcon-intel-cht-wc.c index 91a0023074af..7c4bc8c44c3f 100644 --- a/drivers/extcon/extcon-intel-cht-wc.c +++ b/drivers/extcon/extcon-intel-cht-wc.c @@ -15,7 +15,7 @@ * more details. */ -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/interrupt.h> #include <linux/kernel.h> #include <linux/mfd/intel_soc_pmic.h> diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c index 1a45e745717d..191e99f06a9a 100644 --- a/drivers/extcon/extcon-intel-int3496.c +++ b/drivers/extcon/extcon-intel-int3496.c @@ -19,7 +19,7 @@ */ #include <linux/acpi.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/gpio.h> #include <linux/interrupt.h> #include <linux/module.h> @@ -153,8 +153,9 @@ static int int3496_probe(struct platform_device *pdev) return ret; } - /* queue initial processing of id-pin */ + /* process id-pin so that we start with the right status */ queue_delayed_work(system_wq, &data->work, 0); + flush_delayed_work(&data->work); platform_set_drvdata(pdev, data); diff --git a/drivers/extcon/extcon-max14577.c b/drivers/extcon/extcon-max14577.c index f6414b7fa5bc..b871836da8a4 100644 --- a/drivers/extcon/extcon-max14577.c +++ b/drivers/extcon/extcon-max14577.c @@ -23,7 +23,7 @@ #include <linux/platform_device.h> #include <linux/mfd/max14577.h> #include <linux/mfd/max14577-private.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #define DELAY_MS_DEFAULT 17000 /* unit: millisecond */ @@ -204,8 +204,8 @@ static int max14577_muic_set_debounce_time(struct max14577_muic_info *info, static int max14577_muic_set_path(struct max14577_muic_info *info, u8 val, bool attached) { - int ret = 0; u8 ctrl1, ctrl2 = 0; + int ret; /* Set open state to path before changing hw path */ ret = max14577_update_reg(info->max14577->regmap, diff --git a/drivers/extcon/extcon-max3355.c b/drivers/extcon/extcon-max3355.c index 533e16a952b8..0aa410836f4e 100644 --- a/drivers/extcon/extcon-max3355.c +++ b/drivers/extcon/extcon-max3355.c @@ -9,7 +9,7 @@ * may be copied, distributed, and modified under those terms. */ -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> diff --git a/drivers/extcon/extcon-max77693.c b/drivers/extcon/extcon-max77693.c index 7a5856809047..227651ff9666 100644 --- a/drivers/extcon/extcon-max77693.c +++ b/drivers/extcon/extcon-max77693.c @@ -26,7 +26,7 @@ #include <linux/mfd/max77693.h> #include <linux/mfd/max77693-common.h> #include <linux/mfd/max77693-private.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/regmap.h> #include <linux/irqdomain.h> @@ -266,7 +266,7 @@ static int max77693_muic_set_debounce_time(struct max77693_muic_info *info, static int max77693_muic_set_path(struct max77693_muic_info *info, u8 val, bool attached) { - int ret = 0; + int ret; unsigned int ctrl1, ctrl2 = 0; if (attached) diff --git a/drivers/extcon/extcon-max77843.c b/drivers/extcon/extcon-max77843.c index 6e722d552cf1..c9fcd6cd41cb 100644 --- a/drivers/extcon/extcon-max77843.c +++ b/drivers/extcon/extcon-max77843.c @@ -11,7 +11,7 @@ * (at your option) any later version. */ -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/i2c.h> #include <linux/interrupt.h> #include <linux/kernel.h> @@ -80,7 +80,7 @@ enum max77843_muic_accessory_type { MAX77843_MUIC_ADC_REMOTE_S12_BUTTON, MAX77843_MUIC_ADC_RESERVED_ACC_1, MAX77843_MUIC_ADC_RESERVED_ACC_2, - MAX77843_MUIC_ADC_RESERVED_ACC_3, + MAX77843_MUIC_ADC_RESERVED_ACC_3, /* SmartDock */ MAX77843_MUIC_ADC_RESERVED_ACC_4, MAX77843_MUIC_ADC_RESERVED_ACC_5, MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2, @@ -119,6 +119,7 @@ enum max77843_muic_charger_type { MAX77843_MUIC_CHG_SPECIAL_BIAS, MAX77843_MUIC_CHG_RESERVED, MAX77843_MUIC_CHG_GND, + MAX77843_MUIC_CHG_DOCK, }; static const unsigned int max77843_extcon_cable[] = { @@ -130,6 +131,7 @@ static const unsigned int max77843_extcon_cable[] = { EXTCON_CHG_USB_FAST, EXTCON_CHG_USB_SLOW, EXTCON_DISP_MHL, + EXTCON_DOCK, EXTCON_JIG, EXTCON_NONE, }; @@ -200,7 +202,7 @@ static const struct regmap_irq_chip max77843_muic_irq_chip = { }; static int max77843_muic_set_path(struct max77843_muic_info *info, - u8 val, bool attached) + u8 val, bool attached, bool nobccomp) { struct max77693_dev *max77843 = info->max77843; int ret = 0; @@ -210,10 +212,16 @@ static int max77843_muic_set_path(struct max77843_muic_info *info, ctrl1 = val; else ctrl1 = MAX77843_MUIC_CONTROL1_SW_OPEN; + if (nobccomp) { + /* Disable BC1.2 protocol and force manual switch control */ + ctrl1 |= MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK; + } ret = regmap_update_bits(max77843->regmap_muic, MAX77843_MUIC_REG_CONTROL1, - MAX77843_MUIC_CONTROL1_COM_SW, ctrl1); + MAX77843_MUIC_CONTROL1_COM_SW | + MAX77843_MUIC_CONTROL1_NOBCCOMP_MASK, + ctrl1); if (ret < 0) { dev_err(info->dev, "Cannot switch MUIC port\n"); return ret; @@ -240,6 +248,21 @@ static int max77843_muic_set_path(struct max77843_muic_info *info, return 0; } +static void max77843_charger_set_otg_vbus(struct max77843_muic_info *info, + bool on) +{ + struct max77693_dev *max77843 = info->max77843; + unsigned int cnfg00; + + if (on) + cnfg00 = MAX77843_CHG_OTG_MASK | MAX77843_CHG_BOOST_MASK; + else + cnfg00 = MAX77843_CHG_ENABLE | MAX77843_CHG_BUCK_MASK; + + regmap_update_bits(max77843->regmap_chg, MAX77843_CHG_REG_CHG_CNFG_00, + MAX77843_CHG_MODE_MASK, cnfg00); +} + static int max77843_muic_get_cable_type(struct max77843_muic_info *info, enum max77843_muic_cable_group group, bool *attached) { @@ -288,6 +311,19 @@ static int max77843_muic_get_cable_type(struct max77843_muic_info *info, break; } + if (adc == MAX77843_MUIC_ADC_RESERVED_ACC_3) { /* SmartDock */ + if (chg_type == MAX77843_MUIC_CHG_NONE) { + *attached = false; + cable_type = info->prev_chg_type; + info->prev_chg_type = MAX77843_MUIC_CHG_NONE; + } else { + *attached = true; + cable_type = MAX77843_MUIC_CHG_DOCK; + info->prev_chg_type = MAX77843_MUIC_CHG_DOCK; + } + break; + } + if (chg_type == MAX77843_MUIC_CHG_NONE) { *attached = false; cable_type = info->prev_chg_type; @@ -350,17 +386,18 @@ static int max77843_muic_adc_gnd_handler(struct max77843_muic_info *info) case MAX77843_MUIC_GND_USB_HOST_VB: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, - attached); + attached, false); if (ret < 0) return ret; extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); + max77843_charger_set_otg_vbus(info, attached); break; case MAX77843_MUIC_GND_MHL_VB: case MAX77843_MUIC_GND_MHL: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -396,7 +433,7 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info, return -EINVAL; } - ret = max77843_muic_set_path(info, path, attached); + ret = max77843_muic_set_path(info, path, attached, false); if (ret < 0) return ret; @@ -405,6 +442,26 @@ static int max77843_muic_jig_handler(struct max77843_muic_info *info, return 0; } +static int max77843_muic_dock_handler(struct max77843_muic_info *info, + bool attached) +{ + int ret; + + dev_dbg(info->dev, "external connector is %s (adc: 0x10)\n", + attached ? "attached" : "detached"); + + ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, + attached, attached); + if (ret < 0) + return ret; + + extcon_set_state_sync(info->edev, EXTCON_DISP_MHL, attached); + extcon_set_state_sync(info->edev, EXTCON_USB_HOST, attached); + extcon_set_state_sync(info->edev, EXTCON_DOCK, attached); + + return 0; +} + static int max77843_muic_adc_handler(struct max77843_muic_info *info) { int ret, cable_type; @@ -419,6 +476,11 @@ static int max77843_muic_adc_handler(struct max77843_muic_info *info) info->prev_cable_type); switch (cable_type) { + case MAX77843_MUIC_ADC_RESERVED_ACC_3: /* SmartDock */ + ret = max77843_muic_dock_handler(info, attached); + if (ret < 0) + return ret; + break; case MAX77843_MUIC_ADC_GROUND: ret = max77843_muic_adc_gnd_handler(info); if (ret < 0) @@ -446,7 +508,6 @@ static int max77843_muic_adc_handler(struct max77843_muic_info *info) case MAX77843_MUIC_ADC_REMOTE_S12_BUTTON: case MAX77843_MUIC_ADC_RESERVED_ACC_1: case MAX77843_MUIC_ADC_RESERVED_ACC_2: - case MAX77843_MUIC_ADC_RESERVED_ACC_3: case MAX77843_MUIC_ADC_RESERVED_ACC_4: case MAX77843_MUIC_ADC_RESERVED_ACC_5: case MAX77843_MUIC_ADC_AUDIO_DEVICE_TYPE2: @@ -490,7 +551,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_USB: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_USB, - attached); + attached, false); if (ret < 0) return ret; @@ -501,7 +562,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_DOWNSTREAM: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -511,7 +572,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_DEDICATED: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -521,7 +582,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_SPECIAL_500MA: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -531,7 +592,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) case MAX77843_MUIC_CHG_SPECIAL_1A: ret = max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); if (ret < 0) return ret; @@ -550,6 +611,9 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, false); break; + case MAX77843_MUIC_CHG_DOCK: + extcon_set_state_sync(info->edev, EXTCON_CHG_USB_DCP, attached); + break; case MAX77843_MUIC_CHG_NONE: break; default: @@ -558,7 +622,7 @@ static int max77843_muic_chg_handler(struct max77843_muic_info *info) attached ? "attached" : "detached", chg_type); max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_OPEN, - attached); + attached, false); return -EINVAL; } @@ -798,7 +862,8 @@ static int max77843_muic_probe(struct platform_device *pdev) max77843_muic_set_debounce_time(info, MAX77843_DEBOUNCE_TIME_25MS); /* Set initial path for UART */ - max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true); + max77843_muic_set_path(info, MAX77843_MUIC_CONTROL1_SW_UART, true, + false); /* Check revision number of MUIC device */ ret = regmap_read(max77843->regmap_muic, MAX77843_MUIC_REG_ID, &id); diff --git a/drivers/extcon/extcon-max8997.c b/drivers/extcon/extcon-max8997.c index 4a0612fb9c07..9f30f4929b72 100644 --- a/drivers/extcon/extcon-max8997.c +++ b/drivers/extcon/extcon-max8997.c @@ -25,7 +25,7 @@ #include <linux/kobject.h> #include <linux/mfd/max8997.h> #include <linux/mfd/max8997-private.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/irqdomain.h> #define DEV_NAME "max8997-muic" @@ -204,7 +204,7 @@ static int max8997_muic_set_debounce_time(struct max8997_muic_info *info, static int max8997_muic_set_path(struct max8997_muic_info *info, u8 val, bool attached) { - int ret = 0; + int ret; u8 ctrl1, ctrl2 = 0; if (attached) diff --git a/drivers/extcon/extcon-qcom-spmi-misc.c b/drivers/extcon/extcon-qcom-spmi-misc.c index b8cde096a808..660bbf163bf5 100644 --- a/drivers/extcon/extcon-qcom-spmi-misc.c +++ b/drivers/extcon/extcon-qcom-spmi-misc.c @@ -15,7 +15,7 @@ * GNU General Public License for more details. */ -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/kernel.h> diff --git a/drivers/extcon/extcon-rt8973a.c b/drivers/extcon/extcon-rt8973a.c index eaa355e7d9e4..e059bd5f2041 100644 --- a/drivers/extcon/extcon-rt8973a.c +++ b/drivers/extcon/extcon-rt8973a.c @@ -20,7 +20,7 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include "extcon-rt8973a.h" diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c index 106ef0297b53..0cfb5a3efdf6 100644 --- a/drivers/extcon/extcon-sm5502.c +++ b/drivers/extcon/extcon-sm5502.c @@ -19,7 +19,7 @@ #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/slab.h> -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include "extcon-sm5502.h" diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c index 9c925b05b7aa..53762864a9f7 100644 --- a/drivers/extcon/extcon-usb-gpio.c +++ b/drivers/extcon/extcon-usb-gpio.c @@ -14,7 +14,7 @@ * GNU General Public License for more details. */ -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/gpio.h> #include <linux/gpio/consumer.h> #include <linux/init.h> diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c index 598956f1dcae..6721ab01fe7d 100644 --- a/drivers/extcon/extcon-usbc-cros-ec.c +++ b/drivers/extcon/extcon-usbc-cros-ec.c @@ -14,7 +14,7 @@ * GNU General Public License for more details. */ -#include <linux/extcon.h> +#include <linux/extcon-provider.h> #include <linux/kernel.h> #include <linux/mfd/cros_ec.h> #include <linux/module.h> @@ -34,16 +34,26 @@ struct cros_ec_extcon_info { struct notifier_block notifier; + unsigned int dr; /* data role */ + bool pr; /* power role (true if VBUS enabled) */ bool dp; /* DisplayPort enabled */ bool mux; /* SuperSpeed (usb3) enabled */ unsigned int power_type; }; static const unsigned int usb_type_c_cable[] = { + EXTCON_USB, + EXTCON_USB_HOST, EXTCON_DISP_DP, EXTCON_NONE, }; +enum usb_data_roles { + DR_NONE, + DR_HOST, + DR_DEVICE, +}; + /** * cros_ec_pd_command() - Send a command to the EC. * @info: pointer to struct cros_ec_extcon_info @@ -150,6 +160,7 @@ static int cros_ec_usb_get_role(struct cros_ec_extcon_info *info, pd_control.port = info->port_id; pd_control.role = USB_PD_CTRL_ROLE_NO_CHANGE; pd_control.mux = USB_PD_CTRL_MUX_NO_CHANGE; + pd_control.swap = USB_PD_CTRL_SWAP_NONE; ret = cros_ec_pd_command(info, EC_CMD_USB_PD_CONTROL, 1, &pd_control, sizeof(pd_control), &resp, sizeof(resp)); @@ -183,11 +194,72 @@ static int cros_ec_pd_get_num_ports(struct cros_ec_extcon_info *info) return resp.num_ports; } +static const char *cros_ec_usb_role_string(unsigned int role) +{ + return role == DR_NONE ? "DISCONNECTED" : + (role == DR_HOST ? "DFP" : "UFP"); +} + +static const char *cros_ec_usb_power_type_string(unsigned int type) +{ + switch (type) { + case USB_CHG_TYPE_NONE: + return "USB_CHG_TYPE_NONE"; + case USB_CHG_TYPE_PD: + return "USB_CHG_TYPE_PD"; + case USB_CHG_TYPE_PROPRIETARY: + return "USB_CHG_TYPE_PROPRIETARY"; + case USB_CHG_TYPE_C: + return "USB_CHG_TYPE_C"; + case USB_CHG_TYPE_BC12_DCP: + return "USB_CHG_TYPE_BC12_DCP"; + case USB_CHG_TYPE_BC12_CDP: + return "USB_CHG_TYPE_BC12_CDP"; + case USB_CHG_TYPE_BC12_SDP: + return "USB_CHG_TYPE_BC12_SDP"; + case USB_CHG_TYPE_OTHER: + return "USB_CHG_TYPE_OTHER"; + case USB_CHG_TYPE_VBUS: + return "USB_CHG_TYPE_VBUS"; + case USB_CHG_TYPE_UNKNOWN: + return "USB_CHG_TYPE_UNKNOWN"; + default: + return "USB_CHG_TYPE_UNKNOWN"; + } +} + +static bool cros_ec_usb_power_type_is_wall_wart(unsigned int type, + unsigned int role) +{ + switch (type) { + /* FIXME : Guppy, Donnettes, and other chargers will be miscategorized + * because they identify with USB_CHG_TYPE_C, but we can't return true + * here from that code because that breaks Suzy-Q and other kinds of + * USB Type-C cables and peripherals. + */ + case USB_CHG_TYPE_PROPRIETARY: + case USB_CHG_TYPE_BC12_DCP: + return true; + case USB_CHG_TYPE_PD: + case USB_CHG_TYPE_C: + case USB_CHG_TYPE_BC12_CDP: + case USB_CHG_TYPE_BC12_SDP: + case USB_CHG_TYPE_OTHER: + case USB_CHG_TYPE_VBUS: + case USB_CHG_TYPE_UNKNOWN: + case USB_CHG_TYPE_NONE: + default: + return false; + } +} + static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, bool force) { struct device *dev = info->dev; int role, power_type; + unsigned int dr = DR_NONE; + bool pr = false; bool polarity = false; bool dp = false; bool mux = false; @@ -206,9 +278,12 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, dev_err(dev, "failed getting role err = %d\n", role); return role; } + dev_dbg(dev, "disconnected\n"); } else { int pd_mux_state; + dr = (role & PD_CTRL_RESP_ROLE_DATA) ? DR_HOST : DR_DEVICE; + pr = (role & PD_CTRL_RESP_ROLE_POWER); pd_mux_state = cros_ec_usb_get_pd_mux_state(info); if (pd_mux_state < 0) pd_mux_state = USB_PD_MUX_USB_ENABLED; @@ -216,20 +291,62 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, dp = pd_mux_state & USB_PD_MUX_DP_ENABLED; mux = pd_mux_state & USB_PD_MUX_USB_ENABLED; hpd = pd_mux_state & USB_PD_MUX_HPD_IRQ; - } - if (force || info->dp != dp || info->mux != mux || - info->power_type != power_type) { + dev_dbg(dev, + "connected role 0x%x pwr type %d dr %d pr %d pol %d mux %d dp %d hpd %d\n", + role, power_type, dr, pr, polarity, mux, dp, hpd); + } + /* + * When there is no USB host (e.g. USB PD charger), + * we are not really a UFP for the AP. + */ + if (dr == DR_DEVICE && + cros_ec_usb_power_type_is_wall_wart(power_type, role)) + dr = DR_NONE; + + if (force || info->dr != dr || info->pr != pr || info->dp != dp || + info->mux != mux || info->power_type != power_type) { + bool host_connected = false, device_connected = false; + + dev_dbg(dev, "Type/Role switch! type = %s role = %s\n", + cros_ec_usb_power_type_string(power_type), + cros_ec_usb_role_string(dr)); + info->dr = dr; + info->pr = pr; info->dp = dp; info->mux = mux; info->power_type = power_type; - extcon_set_state(info->edev, EXTCON_DISP_DP, dp); + if (dr == DR_DEVICE) + device_connected = true; + else if (dr == DR_HOST) + host_connected = true; + extcon_set_state(info->edev, EXTCON_USB, device_connected); + extcon_set_state(info->edev, EXTCON_USB_HOST, host_connected); + extcon_set_state(info->edev, EXTCON_DISP_DP, dp); + extcon_set_property(info->edev, EXTCON_USB, + EXTCON_PROP_USB_VBUS, + (union extcon_property_value)(int)pr); + extcon_set_property(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_VBUS, + (union extcon_property_value)(int)pr); + extcon_set_property(info->edev, EXTCON_USB, + EXTCON_PROP_USB_TYPEC_POLARITY, + (union extcon_property_value)(int)polarity); + extcon_set_property(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_TYPEC_POLARITY, + (union extcon_property_value)(int)polarity); extcon_set_property(info->edev, EXTCON_DISP_DP, EXTCON_PROP_USB_TYPEC_POLARITY, (union extcon_property_value)(int)polarity); + extcon_set_property(info->edev, EXTCON_USB, + EXTCON_PROP_USB_SS, + (union extcon_property_value)(int)mux); + extcon_set_property(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_SS, + (union extcon_property_value)(int)mux); extcon_set_property(info->edev, EXTCON_DISP_DP, EXTCON_PROP_USB_SS, (union extcon_property_value)(int)mux); @@ -237,6 +354,8 @@ static int extcon_cros_ec_detect_cable(struct cros_ec_extcon_info *info, EXTCON_PROP_DISP_HPD, (union extcon_property_value)(int)hpd); + extcon_sync(info->edev, EXTCON_USB); + extcon_sync(info->edev, EXTCON_USB_HOST); extcon_sync(info->edev, EXTCON_DISP_DP); } else if (hpd) { @@ -322,13 +441,28 @@ static int extcon_cros_ec_probe(struct platform_device *pdev) return ret; } + extcon_set_property_capability(info->edev, EXTCON_USB, + EXTCON_PROP_USB_VBUS); + extcon_set_property_capability(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_VBUS); + extcon_set_property_capability(info->edev, EXTCON_USB, + EXTCON_PROP_USB_TYPEC_POLARITY); + extcon_set_property_capability(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_TYPEC_POLARITY); extcon_set_property_capability(info->edev, EXTCON_DISP_DP, EXTCON_PROP_USB_TYPEC_POLARITY); + extcon_set_property_capability(info->edev, EXTCON_USB, + EXTCON_PROP_USB_SS); + extcon_set_property_capability(info->edev, EXTCON_USB_HOST, + EXTCON_PROP_USB_SS); extcon_set_property_capability(info->edev, EXTCON_DISP_DP, EXTCON_PROP_USB_SS); extcon_set_property_capability(info->edev, EXTCON_DISP_DP, EXTCON_PROP_DISP_HPD); + info->dr = DR_NONE; + info->pr = false; + platform_set_drvdata(pdev, info); /* Get PD events from the EC */ diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index 35e9fb885486..cb38c2747684 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -36,7 +36,7 @@ #define SUPPORTED_CABLE_MAX 32 -struct __extcon_info { +static const struct __extcon_info { unsigned int type; unsigned int id; const char *name; diff --git a/drivers/extcon/extcon.h b/drivers/extcon/extcon.h index 61358479bfcc..93b5e0306966 100644 --- a/drivers/extcon/extcon.h +++ b/drivers/extcon/extcon.h @@ -2,7 +2,7 @@ #ifndef __LINUX_EXTCON_INTERNAL_H__ #define __LINUX_EXTCON_INTERNAL_H__ -#include <linux/extcon.h> +#include <linux/extcon-provider.h> /** * struct extcon_dev - An extcon device represents one external connector. |