diff options
Diffstat (limited to 'drivers/extcon')
| -rw-r--r-- | drivers/extcon/Kconfig | 3 | ||||
| -rw-r--r-- | drivers/extcon/extcon-axp288.c | 4 | ||||
| -rw-r--r-- | drivers/extcon/extcon-intel-int3496.c | 54 | ||||
| -rw-r--r-- | drivers/extcon/extcon-ptn5150.c | 36 | ||||
| -rw-r--r-- | drivers/extcon/extcon-sm5502.c | 2 | ||||
| -rw-r--r-- | drivers/extcon/extcon-usb-gpio.c | 15 | ||||
| -rw-r--r-- | drivers/extcon/extcon-usbc-cros-ec.c | 2 | ||||
| -rw-r--r-- | drivers/extcon/extcon.c | 37 |
8 files changed, 113 insertions, 40 deletions
diff --git a/drivers/extcon/Kconfig b/drivers/extcon/Kconfig index 0d42e49105dd..dca7cecb37e3 100644 --- a/drivers/extcon/Kconfig +++ b/drivers/extcon/Kconfig @@ -131,6 +131,7 @@ config EXTCON_PALMAS config EXTCON_PTN5150 tristate "NXP PTN5150 CC LOGIC USB EXTCON support" depends on I2C && (GPIOLIB || COMPILE_TEST) + depends on USB_ROLE_SWITCH || !USB_ROLE_SWITCH select REGMAP_I2C help Say Y here to enable support for USB peripheral and USB host @@ -156,7 +157,7 @@ config EXTCON_RT8973A from abnormal high input voltage (up to 28V). config EXTCON_SM5502 - tristate "Silicon Mitus SM5502/SM5504 EXTCON support" + tristate "Silicon Mitus SM5502/SM5504/SM5703 EXTCON support" depends on I2C select IRQ_DOMAIN select REGMAP_I2C diff --git a/drivers/extcon/extcon-axp288.c b/drivers/extcon/extcon-axp288.c index 7c6d5857ff25..180be768c215 100644 --- a/drivers/extcon/extcon-axp288.c +++ b/drivers/extcon/extcon-axp288.c @@ -394,8 +394,8 @@ static int axp288_extcon_probe(struct platform_device *pdev) if (adev) { info->id_extcon = extcon_get_extcon_dev(acpi_dev_name(adev)); put_device(&adev->dev); - if (!info->id_extcon) - return -EPROBE_DEFER; + if (IS_ERR(info->id_extcon)) + return PTR_ERR(info->id_extcon); dev_info(dev, "controlling USB role\n"); } else { diff --git a/drivers/extcon/extcon-intel-int3496.c b/drivers/extcon/extcon-intel-int3496.c index fb527c23639e..ded1a85a5549 100644 --- a/drivers/extcon/extcon-intel-int3496.c +++ b/drivers/extcon/extcon-intel-int3496.c @@ -17,6 +17,7 @@ #include <linux/interrupt.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/regulator/consumer.h> #define INT3496_GPIO_USB_ID 0 #define INT3496_GPIO_VBUS_EN 1 @@ -30,7 +31,9 @@ struct int3496_data { struct gpio_desc *gpio_usb_id; struct gpio_desc *gpio_vbus_en; struct gpio_desc *gpio_usb_mux; + struct regulator *vbus_boost; int usb_id_irq; + bool vbus_boost_enabled; }; static const unsigned int int3496_cable[] = { @@ -53,6 +56,27 @@ static const struct acpi_gpio_mapping acpi_int3496_default_gpios[] = { { }, }; +static void int3496_set_vbus_boost(struct int3496_data *data, bool enable) +{ + int ret; + + if (IS_ERR_OR_NULL(data->vbus_boost)) + return; + + if (data->vbus_boost_enabled == enable) + return; + + if (enable) + ret = regulator_enable(data->vbus_boost); + else + ret = regulator_disable(data->vbus_boost); + + if (ret == 0) + data->vbus_boost_enabled = enable; + else + dev_err(data->dev, "Error updating Vbus boost regulator: %d\n", ret); +} + static void int3496_do_usb_id(struct work_struct *work) { struct int3496_data *data = @@ -71,6 +95,8 @@ static void int3496_do_usb_id(struct work_struct *work) if (!IS_ERR(data->gpio_vbus_en)) gpiod_direction_output(data->gpio_vbus_en, !id); + else + int3496_set_vbus_boost(data, !id); extcon_set_state_sync(data->edev, EXTCON_USB_HOST, !id); } @@ -91,10 +117,12 @@ static int int3496_probe(struct platform_device *pdev) struct int3496_data *data; int ret; - ret = devm_acpi_dev_add_driver_gpios(dev, acpi_int3496_default_gpios); - if (ret) { - dev_err(dev, "can't add GPIO ACPI mapping\n"); - return ret; + if (has_acpi_companion(dev)) { + ret = devm_acpi_dev_add_driver_gpios(dev, acpi_int3496_default_gpios); + if (ret) { + dev_err(dev, "can't add GPIO ACPI mapping\n"); + return ret; + } } data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); @@ -106,7 +134,8 @@ static int int3496_probe(struct platform_device *pdev) if (ret) return ret; - data->gpio_usb_id = devm_gpiod_get(dev, "id", GPIOD_IN); + data->gpio_usb_id = + devm_gpiod_get(dev, "id", GPIOD_IN | GPIOD_FLAGS_BIT_NONEXCLUSIVE); if (IS_ERR(data->gpio_usb_id)) { ret = PTR_ERR(data->gpio_usb_id); dev_err(dev, "can't request USB ID GPIO: %d\n", ret); @@ -120,12 +149,14 @@ static int int3496_probe(struct platform_device *pdev) } data->gpio_vbus_en = devm_gpiod_get(dev, "vbus", GPIOD_ASIS); - if (IS_ERR(data->gpio_vbus_en)) - dev_info(dev, "can't request VBUS EN GPIO\n"); + if (IS_ERR(data->gpio_vbus_en)) { + dev_dbg(dev, "can't request VBUS EN GPIO\n"); + data->vbus_boost = devm_regulator_get_optional(dev, "vbus"); + } data->gpio_usb_mux = devm_gpiod_get(dev, "mux", GPIOD_ASIS); if (IS_ERR(data->gpio_usb_mux)) - dev_info(dev, "can't request USB MUX GPIO\n"); + dev_dbg(dev, "can't request USB MUX GPIO\n"); /* register extcon device */ data->edev = devm_extcon_dev_allocate(dev, int3496_cable); @@ -164,12 +195,19 @@ static const struct acpi_device_id int3496_acpi_match[] = { }; MODULE_DEVICE_TABLE(acpi, int3496_acpi_match); +static const struct platform_device_id int3496_ids[] = { + { .name = "intel-int3496" }, + {}, +}; +MODULE_DEVICE_TABLE(platform, int3496_ids); + static struct platform_driver int3496_driver = { .driver = { .name = "intel-int3496", .acpi_match_table = int3496_acpi_match, }, .probe = int3496_probe, + .id_table = int3496_ids, }; module_platform_driver(int3496_driver); diff --git a/drivers/extcon/extcon-ptn5150.c b/drivers/extcon/extcon-ptn5150.c index 5b9a3cf8df26..017a07197f38 100644 --- a/drivers/extcon/extcon-ptn5150.c +++ b/drivers/extcon/extcon-ptn5150.c @@ -17,6 +17,7 @@ #include <linux/slab.h> #include <linux/extcon-provider.h> #include <linux/gpio/consumer.h> +#include <linux/usb/role.h> /* PTN5150 registers */ #define PTN5150_REG_DEVICE_ID 0x01 @@ -52,6 +53,7 @@ struct ptn5150_info { int irq; struct work_struct irq_work; struct mutex mutex; + struct usb_role_switch *role_sw; }; /* List of detectable cables */ @@ -70,6 +72,7 @@ static const struct regmap_config ptn5150_regmap_config = { static void ptn5150_check_state(struct ptn5150_info *info) { unsigned int port_status, reg_data, vbus; + enum usb_role usb_role = USB_ROLE_NONE; int ret; ret = regmap_read(info->regmap, PTN5150_REG_CC_STATUS, ®_data); @@ -85,6 +88,7 @@ static void ptn5150_check_state(struct ptn5150_info *info) extcon_set_state_sync(info->edev, EXTCON_USB_HOST, false); gpiod_set_value_cansleep(info->vbus_gpiod, 0); extcon_set_state_sync(info->edev, EXTCON_USB, true); + usb_role = USB_ROLE_DEVICE; break; case PTN5150_UFP_ATTACHED: extcon_set_state_sync(info->edev, EXTCON_USB, false); @@ -95,10 +99,18 @@ static void ptn5150_check_state(struct ptn5150_info *info) gpiod_set_value_cansleep(info->vbus_gpiod, 1); extcon_set_state_sync(info->edev, EXTCON_USB_HOST, true); + usb_role = USB_ROLE_HOST; break; default: break; } + + if (usb_role) { + ret = usb_role_switch_set_role(info->role_sw, usb_role); + if (ret) + dev_err(info->dev, "failed to set %s role: %d\n", + usb_role_string(usb_role), ret); + } } static void ptn5150_irq_work(struct work_struct *work) @@ -133,6 +145,13 @@ static void ptn5150_irq_work(struct work_struct *work) extcon_set_state_sync(info->edev, EXTCON_USB, false); gpiod_set_value_cansleep(info->vbus_gpiod, 0); + + ret = usb_role_switch_set_role(info->role_sw, + USB_ROLE_NONE); + if (ret) + dev_err(info->dev, + "failed to set none role: %d\n", + ret); } } @@ -194,6 +213,14 @@ static int ptn5150_init_dev_type(struct ptn5150_info *info) return 0; } +static void ptn5150_work_sync_and_put(void *data) +{ + struct ptn5150_info *info = data; + + cancel_work_sync(&info->irq_work); + usb_role_switch_put(info->role_sw); +} + static int ptn5150_i2c_probe(struct i2c_client *i2c) { struct device *dev = &i2c->dev; @@ -284,6 +311,15 @@ static int ptn5150_i2c_probe(struct i2c_client *i2c) if (ret) return -EINVAL; + info->role_sw = usb_role_switch_get(info->dev); + if (IS_ERR(info->role_sw)) + return dev_err_probe(info->dev, PTR_ERR(info->role_sw), + "failed to get role switch\n"); + + ret = devm_add_action_or_reset(dev, ptn5150_work_sync_and_put, info); + if (ret) + return ret; + /* * Update current extcon state if for example OTG connection was there * before the probe diff --git a/drivers/extcon/extcon-sm5502.c b/drivers/extcon/extcon-sm5502.c index 93da2d8379b1..f706f5288257 100644 --- a/drivers/extcon/extcon-sm5502.c +++ b/drivers/extcon/extcon-sm5502.c @@ -798,6 +798,7 @@ static const struct sm5502_type sm5504_data = { static const struct of_device_id sm5502_dt_match[] = { { .compatible = "siliconmitus,sm5502-muic", .data = &sm5502_data }, { .compatible = "siliconmitus,sm5504-muic", .data = &sm5504_data }, + { .compatible = "siliconmitus,sm5703-muic", .data = &sm5502_data }, { }, }; MODULE_DEVICE_TABLE(of, sm5502_dt_match); @@ -830,6 +831,7 @@ static SIMPLE_DEV_PM_OPS(sm5502_muic_pm_ops, static const struct i2c_device_id sm5502_i2c_id[] = { { "sm5502", (kernel_ulong_t)&sm5502_data }, { "sm5504", (kernel_ulong_t)&sm5504_data }, + { "sm5703-muic", (kernel_ulong_t)&sm5502_data }, { } }; MODULE_DEVICE_TABLE(i2c, sm5502_i2c_id); diff --git a/drivers/extcon/extcon-usb-gpio.c b/drivers/extcon/extcon-usb-gpio.c index f2b65d967384..40d967a11e87 100644 --- a/drivers/extcon/extcon-usb-gpio.c +++ b/drivers/extcon/extcon-usb-gpio.c @@ -226,16 +226,6 @@ static int usb_extcon_suspend(struct device *dev) } } - /* - * We don't want to process any IRQs after this point - * as GPIOs used behind I2C subsystem might not be - * accessible until resume completes. So disable IRQ. - */ - if (info->id_gpiod) - disable_irq(info->id_irq); - if (info->vbus_gpiod) - disable_irq(info->vbus_irq); - if (!device_may_wakeup(dev)) pinctrl_pm_select_sleep_state(dev); @@ -267,11 +257,6 @@ static int usb_extcon_resume(struct device *dev) } } - if (info->id_gpiod) - enable_irq(info->id_irq); - if (info->vbus_gpiod) - enable_irq(info->vbus_irq); - queue_delayed_work(system_power_efficient_wq, &info->wq_detcable, 0); diff --git a/drivers/extcon/extcon-usbc-cros-ec.c b/drivers/extcon/extcon-usbc-cros-ec.c index 5290cc2d19d9..fde1db62be0d 100644 --- a/drivers/extcon/extcon-usbc-cros-ec.c +++ b/drivers/extcon/extcon-usbc-cros-ec.c @@ -68,7 +68,7 @@ static int cros_ec_pd_command(struct cros_ec_extcon_info *info, struct cros_ec_command *msg; int ret; - msg = kzalloc(sizeof(*msg) + max(outsize, insize), GFP_KERNEL); + msg = kzalloc(struct_size(msg, data, max(outsize, insize)), GFP_KERNEL); if (!msg) return -ENOMEM; diff --git a/drivers/extcon/extcon.c b/drivers/extcon/extcon.c index a09e704fd0fa..d3a32b806499 100644 --- a/drivers/extcon/extcon.c +++ b/drivers/extcon/extcon.c @@ -399,6 +399,7 @@ static ssize_t cable_state_show(struct device *dev, /** * extcon_sync() - Synchronize the state for an external connector. * @edev: the extcon device + * @id: the unique id indicating an external connector * * Note that this function send a notification in order to synchronize * the state and property of an external connector. @@ -736,6 +737,9 @@ EXPORT_SYMBOL_GPL(extcon_set_property); /** * extcon_set_property_sync() - Set property of an external connector with sync. + * @edev: the extcon device + * @id: the unique id indicating an external connector + * @prop: the property id indicating an extcon property * @prop_val: the pointer including the new value of extcon property * * Note that when setting the property value of external connector, @@ -851,6 +855,8 @@ EXPORT_SYMBOL_GPL(extcon_set_property_capability); * @extcon_name: the extcon name provided with extcon_dev_register() * * Return the pointer of extcon device if success or ERR_PTR(err) if fail. + * NOTE: This function returns -EPROBE_DEFER so it may only be called from + * probe() functions. */ struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name) { @@ -864,7 +870,7 @@ struct extcon_dev *extcon_get_extcon_dev(const char *extcon_name) if (!strcmp(sd->name, extcon_name)) goto out; } - sd = NULL; + sd = ERR_PTR(-EPROBE_DEFER); out: mutex_unlock(&extcon_dev_list_lock); return sd; @@ -1218,19 +1224,14 @@ int extcon_dev_register(struct extcon_dev *edev) edev->dev.type = &edev->extcon_dev_type; } - ret = device_register(&edev->dev); - if (ret) { - put_device(&edev->dev); - goto err_dev; - } - spin_lock_init(&edev->lock); - edev->nh = devm_kcalloc(&edev->dev, edev->max_supported, - sizeof(*edev->nh), GFP_KERNEL); - if (!edev->nh) { - ret = -ENOMEM; - device_unregister(&edev->dev); - goto err_dev; + if (edev->max_supported) { + edev->nh = kcalloc(edev->max_supported, sizeof(*edev->nh), + GFP_KERNEL); + if (!edev->nh) { + ret = -ENOMEM; + goto err_alloc_nh; + } } for (index = 0; index < edev->max_supported; index++) @@ -1241,6 +1242,12 @@ int extcon_dev_register(struct extcon_dev *edev) dev_set_drvdata(&edev->dev, edev); edev->state = 0; + ret = device_register(&edev->dev); + if (ret) { + put_device(&edev->dev); + goto err_dev; + } + mutex_lock(&extcon_dev_list_lock); list_add(&edev->entry, &extcon_dev_list); mutex_unlock(&extcon_dev_list_lock); @@ -1249,6 +1256,9 @@ int extcon_dev_register(struct extcon_dev *edev) err_dev: if (edev->max_supported) + kfree(edev->nh); +err_alloc_nh: + if (edev->max_supported) kfree(edev->extcon_dev_type.groups); err_alloc_groups: if (edev->max_supported && edev->mutually_exclusive) { @@ -1308,6 +1318,7 @@ void extcon_dev_unregister(struct extcon_dev *edev) if (edev->max_supported) { kfree(edev->extcon_dev_type.groups); kfree(edev->cables); + kfree(edev->nh); } put_device(&edev->dev); |