diff options
Diffstat (limited to 'drivers/gpio/Kconfig')
| -rw-r--r-- | drivers/gpio/Kconfig | 107 |
1 files changed, 61 insertions, 46 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 60d9374c72c0..a01af1180616 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -247,6 +247,16 @@ config GPIO_EM help Say yes here to support GPIO on Renesas Emma Mobile SoCs. +config GPIO_EN7523 + tristate "Airoha GPIO support" + depends on ARCH_AIROHA + default ARCH_AIROHA + select GPIO_GENERIC + select GPIOLIB_IRQCHIP + help + Say Y or M here to support the GPIO controller block on the + Airoha EN7523 SoC. It supports two banks of 32 GPIOs. + config GPIO_EP93XX def_bool y depends on ARCH_EP93XX @@ -331,6 +341,10 @@ config GPIO_ICH If unsure, say N. +config GPIO_IMX_SCU + def_bool y + depends on IMX_SCU + config GPIO_IOP tristate "Intel IOP GPIO" depends on ARCH_IOP32X || COMPILE_TEST @@ -343,8 +357,8 @@ config GPIO_IOP config GPIO_IXP4XX bool "Intel IXP4xx GPIO" - depends on ARM # For <asm/mach-types.h> depends on ARCH_IXP4XX + depends on OF select GPIO_GENERIC select GPIOLIB_IRQCHIP select IRQ_DOMAIN_HIERARCHY @@ -353,6 +367,7 @@ config GPIO_IXP4XX IXP4xx series of chips. If unsure, say N. + config GPIO_LOGICVC tristate "Xylon LogiCVC GPIO support" depends on MFD_SYSCON && OF @@ -533,6 +548,7 @@ config GPIO_SAMA5D2_PIOBU tristate "SAMA5D2 PIOBU GPIO support" depends on MFD_SYSCON depends on OF_GPIO + depends on ARCH_AT91 || COMPILE_TEST select GPIO_SYSCON help Say yes here to use the PIOBU pins as GPIOs. @@ -664,10 +680,10 @@ config GPIO_UNIPHIER config GPIO_VF610 def_bool y - depends on ARCH_MXC && SOC_VF610 + depends on ARCH_MXC select GPIOLIB_IRQCHIP help - Say yes here to support Vybrid vf610 GPIOs. + Say yes here to support i.MX or Vybrid vf610 GPIOs. config GPIO_VISCONTI tristate "Toshiba Visconti GPIO support" @@ -679,12 +695,6 @@ config GPIO_VISCONTI help Say yes here to support GPIO on Tohisba Visconti. -config GPIO_VR41XX - tristate "NEC VR4100 series General-purpose I/O Unit support" - depends on CPU_VR41XX - help - Say yes here to support the NEC VR4100 series General-purpose I/O Unit. - config GPIO_VX855 tristate "VIA VX855/VX875 GPIO" depends on (X86 || COMPILE_TEST) && PCI @@ -731,14 +741,12 @@ config GPIO_XILINX Say yes here to support the Xilinx FPGA GPIO device. config GPIO_XLP - tristate "Netlogic XLP GPIO support" - depends on OF_GPIO && (CPU_XLP || ARCH_THUNDER2 || COMPILE_TEST) + tristate "Cavium ThunderX2 GPIO support" + depends on ARCH_THUNDER2 || COMPILE_TEST select GPIOLIB_IRQCHIP help - This driver provides support for GPIO interface on Netlogic XLP MIPS64 - SoCs. Currently supported XLP variants are XLP8XX, XLP3XX, XLP2XX, - XLP9XX and XLP5XX. The same GPIO controller block is also present in - Cavium's ThunderX2 CN99XX SoCs. + This driver provides support for GPIO interface on Cavium's ThunderX2 + CN99XX SoCs (Originally from Netlogic XLP). If unsure, say N. @@ -820,11 +828,24 @@ endmenu menu "Port-mapped I/O GPIO drivers" depends on X86 # Unconditional I/O space access +config GPIO_I8255 + tristate + help + Enables support for the i8255 interface library functions. The i8255 + interface library provides functions to facilitate communication with + interfaces compatible with the venerable Intel 8255 Programmable + Peripheral Interface (PPI). The Intel 8255 PPI chip was first released + in the early 1970s but compatible interfaces are nowadays typically + found embedded in larger VLSI processing chips and FPGA components. + + If built as a module its name will be gpio-i8255. + config GPIO_104_DIO_48E tristate "ACCES 104-DIO-48E GPIO support" depends on PC104 select ISA_BUS_API select GPIOLIB_IRQCHIP + select GPIO_I8255 help Enables GPIO support for the ACCES 104-DIO-48E series (104-DIO-48E, 104-DIO-24E). The base port addresses for the devices may be @@ -848,6 +869,7 @@ config GPIO_104_IDI_48 depends on PC104 select ISA_BUS_API select GPIOLIB_IRQCHIP + select GPIO_I8255 help Enables GPIO support for the ACCES 104-IDI-48 family (104-IDI-48A, 104-IDI-48AC, 104-IDI-48B, 104-IDI-48BC). The base port addresses for @@ -856,10 +878,11 @@ config GPIO_104_IDI_48 module parameter. config GPIO_F7188X - tristate "F71869, F71869A, F71882FG, F71889F and F81866 GPIO support" + tristate "Fintek and Nuvoton Super-I/O GPIO support" help This option enables support for GPIOs found on Fintek Super-I/O chips F71869, F71869A, F71882FG, F71889F and F81866. + As well as Nuvoton Super-I/O chip NCT6116D. To compile this driver as a module, choose M here: the module will be called f7188x-gpio. @@ -868,6 +891,7 @@ config GPIO_GPIO_MM tristate "Diamond Systems GPIO-MM GPIO support" depends on PC104 select ISA_BUS_API + select GPIO_I8255 help Enables GPIO support for the Diamond Systems GPIO-MM and GPIO-MM-12. @@ -966,20 +990,6 @@ endmenu menu "I2C GPIO expanders" depends on I2C -config GPIO_ADP5588 - tristate "ADP5588 I2C GPIO expander" - help - This option enables support for 18 GPIOs found - on Analog Devices ADP5588 GPIO Expanders. - -config GPIO_ADP5588_IRQ - bool "Interrupt controller support for ADP5588" - depends on GPIO_ADP5588=y - select GPIOLIB_IRQCHIP - help - Say yes here to enable the adp5588 to be used as an interrupt - controller. It requires the driver to be built in the kernel. - config GPIO_ADNP tristate "Avionic Design N-bit GPIO expander" depends on OF_GPIO @@ -1133,17 +1143,6 @@ config GPIO_ARIZONA help Support for GPIOs on Wolfson Arizona class devices. -config GPIO_BD70528 - tristate "ROHM BD70528 GPIO support" - depends on MFD_ROHM_BD70528 - help - Support for GPIOs on ROHM BD70528 PMIC. There are four GPIOs - available on the ROHM PMIC in total. The GPIOs can also - generate interrupts. - - This driver can also be built as a module. If so, the module - will be called gpio-bd70528. - config GPIO_BD71815 tristate "ROHM BD71815 PMIC GPIO support" depends on MFD_ROHM_BD71828 @@ -1359,6 +1358,18 @@ config GPIO_TIMBERDALE help Add support for the GPIO IP in the timberdale FPGA. +config GPIO_TN48M_CPLD + tristate "Delta Networks TN48M switch CPLD GPIO driver" + depends on MFD_TN48M_CPLD + select GPIO_REGMAP + help + This enables support for the GPIOs found on the Delta + Networks TN48M switch Lattice CPLD. It provides 12 pins in total, + they are input-only or output-only type. + + This driver can also be built as a module. If so, the + module will be called gpio-tn48m. + config GPIO_TPS65086 tristate "TI TPS65086 GPO" depends on MFD_TPS65086 @@ -1393,7 +1404,7 @@ config GPIO_TPS65912 This driver supports TPS65912 GPIO chip. config GPIO_TPS68470 - bool "TPS68470 GPIO" + tristate "TPS68470 GPIO" depends on INTEL_SKL_INT3472 help Select this option to enable GPIO driver for the TPS68470 @@ -1403,10 +1414,6 @@ config GPIO_TPS68470 input or output as appropriate, the sensor related GPIOs are "output only" GPIOs. - This driver config is bool, as the GPIO functionality - of the TPS68470 must be available before dependent - drivers are loaded. - config GPIO_TQMX86 tristate "TQ-Systems QTMX86 GPIO" depends on MFD_TQMX86 || COMPILE_TEST @@ -1694,6 +1701,14 @@ config GPIO_VIRTIO These virtual GPIOs can be routed to real GPIOs or attached to simulators on the host (like QEMU). +config GPIO_SIM + tristate "GPIO Simulator Module" + select IRQ_SIM + select CONFIGFS_FS + help + This enables the GPIO simulator - a configfs-based GPIO testing + driver. + endmenu endif |