diff options
Diffstat (limited to 'drivers/gpio/Kconfig')
| -rw-r--r-- | drivers/gpio/Kconfig | 73 |
1 files changed, 55 insertions, 18 deletions
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index 3f80f167ed56..8dbb2280538d 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -122,12 +122,6 @@ config GPIO_ATH79 Select this option to enable GPIO driver for Atheros AR71XX/AR724X/AR913X SoC devices. -config GPIO_AXP209 - tristate "X-Powers AXP209 PMIC GPIO Support" - depends on MFD_AXP20X - help - Say yes to enable GPIO support for the AXP209 PMIC - config GPIO_BCM_KONA bool "Broadcom Kona GPIO" depends on OF_GPIO && (ARCH_BCM_MOBILE || COMPILE_TEST) @@ -139,7 +133,7 @@ config GPIO_BRCMSTB default y if (ARCH_BRCMSTB || BMIPS_GENERIC) depends on OF_GPIO && (ARCH_BRCMSTB || BMIPS_GENERIC || COMPILE_TEST) select GPIO_GENERIC - select GPIOLIB_IRQCHIP + select IRQ_DOMAIN help Say yes here to enable GPIO support for Broadcom STB (BCM7XXX) SoCs. @@ -286,8 +280,7 @@ config GPIO_LYNXPOINT Requires ACPI device enumeration code to set up a platform device. config GPIO_MB86S7X - bool "GPIO support for Fujitsu MB86S7x Platforms" - depends on ARCH_MB86S7X || COMPILE_TEST + tristate "GPIO support for Fujitsu MB86S7x Platforms" help Say yes here to support the GPIO controller in Fujitsu MB86S70 SoCs. @@ -442,6 +435,15 @@ config GPIO_TEGRA help Say yes here to support GPIO pins on NVIDIA Tegra SoCs. +config GPIO_TEGRA186 + tristate "NVIDIA Tegra186 GPIO support" + default ARCH_TEGRA_186_SOC + depends on ARCH_TEGRA_186_SOC || COMPILE_TEST + depends on OF_GPIO + select GPIOLIB_IRQCHIP + help + Say yes here to support GPIO pins on NVIDIA Tegra186 SoCs. + config GPIO_TS4800 tristate "TS-4800 DIO blocks and compatibles" depends on OF_GPIO @@ -475,6 +477,14 @@ config GPIO_TZ1090_PDC help Say yes here to support Toumaz Xenif TZ1090 PDC GPIOs. +config GPIO_UNIPHIER + tristate "UniPhier GPIO support" + depends on ARCH_UNIPHIER || COMPILE_TEST + depends on OF_GPIO + select IRQ_DOMAIN_HIERARCHY + help + Say yes here to support UniPhier GPIOs. + config GPIO_VF610 def_bool y depends on ARCH_MXC && SOC_VF610 @@ -688,6 +698,22 @@ config GPIO_TS5500 blocks of the TS-5500: DIO1, DIO2 and the LCD port, and the TS-5600 LCD port. +config GPIO_WINBOND + tristate "Winbond Super I/O GPIO support" + depends on ISA_BUS_API + help + This option enables support for GPIOs found on Winbond Super I/O + chips. + Currently, only W83627UHG (also known as Nuvoton NCT6627UD) is + supported. + + You will need to provide a module parameter "gpios", or a + boot-time parameter "gpio_winbond.gpios" with a bitmask of GPIO + ports to enable (bit 0 is GPIO1, bit 1 is GPIO2, etc.). + + To compile this driver as a module, choose M here: the module will + be called gpio-winbond. + config GPIO_WS16C48 tristate "WinSystems WS16C48 GPIO support" depends on ISA_BUS_API @@ -818,15 +844,6 @@ config GPIO_PCF857X This driver provides an in-kernel interface to those GPIOs using platform-neutral GPIO calls. -config GPIO_SX150X - bool "Semtech SX150x I2C GPIO expander (deprecated)" - depends on PINCTRL && I2C=y - select PINCTRL_SX150X - default n - help - Say yes here to provide support for Semtech SX150x-series I2C - GPIO expanders. The GPIO driver was replaced by a Pinctrl version. - config GPIO_TPIC2810 tristate "TPIC2810 8-Bit I2C GPO expander" help @@ -1227,6 +1244,16 @@ config GPIO_PCI_IDIO_16 low). Input filter control is not supported by this driver, and the input filters are deactivated by this driver. +config GPIO_PCIE_IDIO_24 + tristate "ACCES PCIe-IDIO-24 GPIO support" + select GPIOLIB_IRQCHIP + help + Enables GPIO support for the ACCES PCIe-IDIO-24 family (PCIe-IDIO-24, + PCIe-IDI-24, PCIe-IDO-24, PCIe-IDIO-12). An interrupt is generated + when any of the inputs change state (low to high or high to low). + Input filter control is not supported by this driver, and the input + filters are deactivated by this driver. + config GPIO_RDC321X tristate "RDC R-321x GPIO support" select MFD_CORE @@ -1256,6 +1283,16 @@ config GPIO_74X164 shift registers. This driver can be used to provide access to more gpio outputs. +config GPIO_MAX3191X + tristate "Maxim MAX3191x industrial serializer" + select CRC8 + help + GPIO driver for Maxim MAX31910, MAX31911, MAX31912, MAX31913, + MAX31953 and MAX31963 industrial serializer, a daisy-chainable + chip to make 8 digital 24V inputs available via SPI. Supports + CRC checksums to guard against electromagnetic interference, + as well as undervoltage and overtemperature detection. + config GPIO_MAX7301 tristate "Maxim MAX7301 GPIO expander" select GPIO_MAX730X |