aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/gpio/gpio-mvebu.c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/gpio/gpio-mvebu.c')
-rw-r--r--drivers/gpio/gpio-mvebu.c101
1 files changed, 68 insertions, 33 deletions
diff --git a/drivers/gpio/gpio-mvebu.c b/drivers/gpio/gpio-mvebu.c
index 75e3c235bd3a..8f429d9f3661 100644
--- a/drivers/gpio/gpio-mvebu.c
+++ b/drivers/gpio/gpio-mvebu.c
@@ -70,7 +70,12 @@
*/
#define PWM_BLINK_ON_DURATION_OFF 0x0
#define PWM_BLINK_OFF_DURATION_OFF 0x4
+#define PWM_BLINK_COUNTER_B_OFF 0x8
+/* Armada 8k variant gpios register offsets */
+#define AP80X_GPIO0_OFF_A8K 0x1040
+#define CP11X_GPIO0_OFF_A8K 0x100
+#define CP11X_GPIO1_OFF_A8K 0x140
/* The MV78200 has per-CPU registers for edge mask and level mask */
#define GPIO_EDGE_MASK_MV78200_OFF(cpu) ((cpu) ? 0x30 : 0x18)
@@ -93,6 +98,7 @@
struct mvebu_pwm {
struct regmap *regs;
+ u32 offset;
unsigned long clk_rate;
struct gpio_desc *gpiod;
struct pwm_chip chip;
@@ -283,12 +289,12 @@ mvebu_gpio_write_level_mask(struct mvebu_gpio_chip *mvchip, u32 val)
*/
static unsigned int mvebu_pwmreg_blink_on_duration(struct mvebu_pwm *mvpwm)
{
- return PWM_BLINK_ON_DURATION_OFF;
+ return mvpwm->offset + PWM_BLINK_ON_DURATION_OFF;
}
static unsigned int mvebu_pwmreg_blink_off_duration(struct mvebu_pwm *mvpwm)
{
- return PWM_BLINK_OFF_DURATION_OFF;
+ return mvpwm->offset + PWM_BLINK_OFF_DURATION_OFF;
}
/*
@@ -781,51 +787,80 @@ static int mvebu_pwm_probe(struct platform_device *pdev,
struct device *dev = &pdev->dev;
struct mvebu_pwm *mvpwm;
void __iomem *base;
+ u32 offset;
u32 set;
- if (!of_device_is_compatible(mvchip->chip.of_node,
- "marvell,armada-370-gpio"))
- return 0;
-
- /*
- * There are only two sets of PWM configuration registers for
- * all the GPIO lines on those SoCs which this driver reserves
- * for the first two GPIO chips. So if the resource is missing
- * we can't treat it as an error.
- */
- if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"))
+ if (of_device_is_compatible(mvchip->chip.of_node,
+ "marvell,armada-370-gpio")) {
+ /*
+ * There are only two sets of PWM configuration registers for
+ * all the GPIO lines on those SoCs which this driver reserves
+ * for the first two GPIO chips. So if the resource is missing
+ * we can't treat it as an error.
+ */
+ if (!platform_get_resource_byname(pdev, IORESOURCE_MEM, "pwm"))
+ return 0;
+ offset = 0;
+ } else if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) {
+ int ret = of_property_read_u32(dev->of_node,
+ "marvell,pwm-offset", &offset);
+ if (ret < 0)
+ return 0;
+ } else {
return 0;
+ }
if (IS_ERR(mvchip->clk))
return PTR_ERR(mvchip->clk);
- /*
- * Use set A for lines of GPIO chip with id 0, B for GPIO chip
- * with id 1. Don't allow further GPIO chips to be used for PWM.
- */
- if (id == 0)
- set = 0;
- else if (id == 1)
- set = U32_MAX;
- else
- return -EINVAL;
- regmap_write(mvchip->regs,
- GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, set);
-
mvpwm = devm_kzalloc(dev, sizeof(struct mvebu_pwm), GFP_KERNEL);
if (!mvpwm)
return -ENOMEM;
mvchip->mvpwm = mvpwm;
mvpwm->mvchip = mvchip;
+ mvpwm->offset = offset;
+
+ if (mvchip->soc_variant == MVEBU_GPIO_SOC_VARIANT_A8K) {
+ mvpwm->regs = mvchip->regs;
+
+ switch (mvchip->offset) {
+ case AP80X_GPIO0_OFF_A8K:
+ case CP11X_GPIO0_OFF_A8K:
+ /* Blink counter A */
+ set = 0;
+ break;
+ case CP11X_GPIO1_OFF_A8K:
+ /* Blink counter B */
+ set = U32_MAX;
+ mvpwm->offset += PWM_BLINK_COUNTER_B_OFF;
+ break;
+ default:
+ return -EINVAL;
+ }
+ } else {
+ base = devm_platform_ioremap_resource_byname(pdev, "pwm");
+ if (IS_ERR(base))
+ return PTR_ERR(base);
- base = devm_platform_ioremap_resource_byname(pdev, "pwm");
- if (IS_ERR(base))
- return PTR_ERR(base);
+ mvpwm->regs = devm_regmap_init_mmio(&pdev->dev, base,
+ &mvebu_gpio_regmap_config);
+ if (IS_ERR(mvpwm->regs))
+ return PTR_ERR(mvpwm->regs);
- mvpwm->regs = devm_regmap_init_mmio(&pdev->dev, base,
- &mvebu_gpio_regmap_config);
- if (IS_ERR(mvpwm->regs))
- return PTR_ERR(mvpwm->regs);
+ /*
+ * Use set A for lines of GPIO chip with id 0, B for GPIO chip
+ * with id 1. Don't allow further GPIO chips to be used for PWM.
+ */
+ if (id == 0)
+ set = 0;
+ else if (id == 1)
+ set = U32_MAX;
+ else
+ return -EINVAL;
+ }
+
+ regmap_write(mvchip->regs,
+ GPIO_BLINK_CNT_SELECT_OFF + mvchip->offset, set);
mvpwm->clk_rate = clk_get_rate(mvchip->clk);
if (!mvpwm->clk_rate) {