diff options
Diffstat (limited to 'drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c')
| -rw-r--r-- | drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c | 138 |
1 files changed, 29 insertions, 109 deletions
diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c index 4da1d7fb10f4..ddff958aa3ff 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_drv.c @@ -43,6 +43,8 @@ #include "amdgpu_amdkfd.h" +#include "amdgpu_ras.h" + /* * KMS wrapper. * - 3.0.0 - initial driver @@ -87,8 +89,6 @@ #define KMS_DRIVER_MINOR 35 #define KMS_DRIVER_PATCHLEVEL 0 -#define AMDGPU_MAX_TIMEOUT_PARAM_LENTH 256 - int amdgpu_vram_limit = 0; int amdgpu_vis_vram_limit = 0; int amdgpu_gart_size = -1; /* auto */ @@ -128,11 +128,6 @@ char *amdgpu_disable_cu = NULL; char *amdgpu_virtual_display = NULL; /* OverDrive(bit 14) disabled by default*/ uint amdgpu_pp_feature_mask = 0xffffbfff; -int amdgpu_ngg = 0; -int amdgpu_prim_buf_per_se = 0; -int amdgpu_pos_buf_per_se = 0; -int amdgpu_cntl_sb_buf_per_se = 0; -int amdgpu_param_buf_per_se = 0; int amdgpu_job_hang_limit = 0; int amdgpu_lbpw = -1; int amdgpu_compute_multipipe = -1; @@ -146,12 +141,13 @@ int amdgpu_mcbp = 0; int amdgpu_discovery = -1; int amdgpu_mes = 0; int amdgpu_noretry = 1; +int amdgpu_force_asic_type = -1; struct amdgpu_mgpu_info mgpu_info = { .mutex = __MUTEX_INITIALIZER(mgpu_info.mutex), }; int amdgpu_ras_enable = -1; -uint amdgpu_ras_mask = 0xfffffffb; +uint amdgpu_ras_mask = 0xffffffff; /** * DOC: vramlimit (int) @@ -244,10 +240,13 @@ module_param_named(msi, amdgpu_msi, int, 0444); * * The format can be [Non-Compute] or [GFX,Compute,SDMA,Video]. That is there can be one or * multiple values specified. 0 and negative values are invalidated. They will be adjusted - * to default timeout. - * - With one value specified, the setting will apply to all non-compute jobs. - * - With multiple values specified, the first one will be for GFX. The second one is for Compute. - * And the third and fourth ones are for SDMA and Video. + * to the default timeout. + * + * - With one value specified, the setting will apply to all non-compute jobs. + * - With multiple values specified, the first one will be for GFX. + * The second one is for Compute. The third and fourth ones are + * for SDMA and Video. + * * By default(with no lockup_timeout settings), the timeout for all non-compute(GFX, SDMA and Video) * jobs is 10000. And there is no timeout enforced on compute jobs. */ @@ -449,42 +448,6 @@ MODULE_PARM_DESC(virtual_display, module_param_named(virtual_display, amdgpu_virtual_display, charp, 0444); /** - * DOC: ngg (int) - * Set to enable Next Generation Graphics (1 = enable). The default is 0 (disabled). - */ -MODULE_PARM_DESC(ngg, "Next Generation Graphics (1 = enable, 0 = disable(default depending on gfx))"); -module_param_named(ngg, amdgpu_ngg, int, 0444); - -/** - * DOC: prim_buf_per_se (int) - * Override the size of Primitive Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). - */ -MODULE_PARM_DESC(prim_buf_per_se, "the size of Primitive Buffer per Shader Engine (default depending on gfx)"); -module_param_named(prim_buf_per_se, amdgpu_prim_buf_per_se, int, 0444); - -/** - * DOC: pos_buf_per_se (int) - * Override the size of Position Buffer per Shader Engine in Byte. The default is 0 (depending on gfx). - */ -MODULE_PARM_DESC(pos_buf_per_se, "the size of Position Buffer per Shader Engine (default depending on gfx)"); -module_param_named(pos_buf_per_se, amdgpu_pos_buf_per_se, int, 0444); - -/** - * DOC: cntl_sb_buf_per_se (int) - * Override the size of Control Sideband per Shader Engine in Byte. The default is 0 (depending on gfx). - */ -MODULE_PARM_DESC(cntl_sb_buf_per_se, "the size of Control Sideband per Shader Engine (default depending on gfx)"); -module_param_named(cntl_sb_buf_per_se, amdgpu_cntl_sb_buf_per_se, int, 0444); - -/** - * DOC: param_buf_per_se (int) - * Override the size of Off-Chip Parameter Cache per Shader Engine in Byte. - * The default is 0 (depending on gfx). - */ -MODULE_PARM_DESC(param_buf_per_se, "the size of Off-Chip Parameter Cache per Shader Engine (default depending on gfx)"); -module_param_named(param_buf_per_se, amdgpu_param_buf_per_se, int, 0444); - -/** * DOC: job_hang_limit (int) * Set how much time allow a job hang and not drop it. The default is 0. */ @@ -616,6 +579,16 @@ MODULE_PARM_DESC(noretry, "Disable retry faults (0 = retry enabled, 1 = retry disabled (default))"); module_param_named(noretry, amdgpu_noretry, int, 0644); +/** + * DOC: force_asic_type (int) + * A non negative value used to specify the asic type for all supported GPUs. + */ +MODULE_PARM_DESC(force_asic_type, + "A non negative value used to specify the asic type for all supported GPUs"); +module_param_named(force_asic_type, amdgpu_force_asic_type, int, 0444); + + + #ifdef CONFIG_HSA_AMD /** * DOC: sched_policy (int) @@ -1022,6 +995,7 @@ static const struct pci_device_id pciidlist[] = { /* Navi12 */ {0x1002, 0x7360, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI12|AMD_EXP_HW_SUPPORT}, + {0x1002, 0x7362, PCI_ANY_ID, PCI_ANY_ID, 0, 0, CHIP_NAVI12|AMD_EXP_HW_SUPPORT}, {0, 0, 0} }; @@ -1127,7 +1101,10 @@ amdgpu_pci_remove(struct pci_dev *pdev) { struct drm_device *dev = pci_get_drvdata(pdev); - DRM_ERROR("Device removal is currently not supported outside of fbcon\n"); +#ifdef MODULE + if (THIS_MODULE->state != MODULE_STATE_GOING) +#endif + DRM_ERROR("Hotplug removal is not supported\n"); drm_dev_unplug(dev); drm_dev_put(dev); pci_disable_device(pdev); @@ -1140,6 +1117,9 @@ amdgpu_pci_shutdown(struct pci_dev *pdev) struct drm_device *dev = pci_get_drvdata(pdev); struct amdgpu_device *adev = dev->dev_private; + if (amdgpu_ras_intr_triggered()) + return; + /* if we are running in a VM, make sure the device * torn down properly on reboot/shutdown. * unfortunately we can't detect certain @@ -1347,66 +1327,6 @@ int amdgpu_file_to_fpriv(struct file *filp, struct amdgpu_fpriv **fpriv) return 0; } -int amdgpu_device_get_job_timeout_settings(struct amdgpu_device *adev) -{ - char *input = amdgpu_lockup_timeout; - char *timeout_setting = NULL; - int index = 0; - long timeout; - int ret = 0; - - /* - * By default timeout for non compute jobs is 10000. - * And there is no timeout enforced on compute jobs. - */ - adev->gfx_timeout = msecs_to_jiffies(10000); - adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout; - adev->compute_timeout = MAX_SCHEDULE_TIMEOUT; - - if (strnlen(input, AMDGPU_MAX_TIMEOUT_PARAM_LENTH)) { - while ((timeout_setting = strsep(&input, ",")) && - strnlen(timeout_setting, AMDGPU_MAX_TIMEOUT_PARAM_LENTH)) { - ret = kstrtol(timeout_setting, 0, &timeout); - if (ret) - return ret; - - if (timeout == 0) { - index++; - continue; - } else if (timeout < 0) { - timeout = MAX_SCHEDULE_TIMEOUT; - } else { - timeout = msecs_to_jiffies(timeout); - } - - switch (index++) { - case 0: - adev->gfx_timeout = timeout; - break; - case 1: - adev->compute_timeout = timeout; - break; - case 2: - adev->sdma_timeout = timeout; - break; - case 3: - adev->video_timeout = timeout; - break; - default: - break; - } - } - /* - * There is only one value specified and - * it should apply to all non-compute jobs. - */ - if (index == 1) - adev->sdma_timeout = adev->video_timeout = adev->gfx_timeout; - } - - return ret; -} - static bool amdgpu_get_crtc_scanout_position(struct drm_device *dev, unsigned int pipe, bool in_vblank_irq, int *vpos, int *hpos, |