diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c')
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c | 355 |
1 files changed, 219 insertions, 136 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c index d91df5ef0cb3..09d301216076 100644 --- a/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c +++ b/drivers/gpu/drm/amd/display/dc/core/dc_link_dp.c @@ -49,6 +49,8 @@ static void wait_for_training_aux_rd_interval( { union training_aux_rd_interval training_rd_interval; + memset(&training_rd_interval, 0, sizeof(training_rd_interval)); + /* overwrite the delay if rev > 1.1*/ if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_12) { /* DP 1.2 or later - retrieve delay through @@ -117,6 +119,13 @@ static void dpcd_set_link_settings( core_link_write_dpcd(link, DP_DOWNSPREAD_CTRL, &downspread.raw, sizeof(downspread)); + if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_14 && + (link->dpcd_caps.link_rate_set >= 1 && + link->dpcd_caps.link_rate_set <= 8)) { + core_link_write_dpcd(link, DP_LINK_RATE_SET, + &link->dpcd_caps.link_rate_set, 1); + } + DC_LOG_HW_LINK_TRAINING("%s\n %x rate = %x\n %x lane = %x\n %x spread = %x\n", __func__, DP_LINK_BW_SET, @@ -1089,6 +1098,121 @@ static struct dc_link_settings get_max_link_cap(struct dc_link *link) return max_link_cap; } +static enum dc_status read_hpd_rx_irq_data( + struct dc_link *link, + union hpd_irq_data *irq_data) +{ + static enum dc_status retval; + + /* The HW reads 16 bytes from 200h on HPD, + * but if we get an AUX_DEFER, the HW cannot retry + * and this causes the CTS tests 4.3.2.1 - 3.2.4 to + * fail, so we now explicitly read 6 bytes which is + * the req from the above mentioned test cases. + * + * For DP 1.4 we need to read those from 2002h range. + */ + if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_14) + retval = core_link_read_dpcd( + link, + DP_SINK_COUNT, + irq_data->raw, + sizeof(union hpd_irq_data)); + else { + /* Read 14 bytes in a single read and then copy only the required fields. + * This is more efficient than doing it in two separate AUX reads. */ + + uint8_t tmp[DP_SINK_STATUS_ESI - DP_SINK_COUNT_ESI + 1]; + + retval = core_link_read_dpcd( + link, + DP_SINK_COUNT_ESI, + tmp, + sizeof(tmp)); + + if (retval != DC_OK) + return retval; + + irq_data->bytes.sink_cnt.raw = tmp[DP_SINK_COUNT_ESI - DP_SINK_COUNT_ESI]; + irq_data->bytes.device_service_irq.raw = tmp[DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 - DP_SINK_COUNT_ESI]; + irq_data->bytes.lane01_status.raw = tmp[DP_LANE0_1_STATUS_ESI - DP_SINK_COUNT_ESI]; + irq_data->bytes.lane23_status.raw = tmp[DP_LANE2_3_STATUS_ESI - DP_SINK_COUNT_ESI]; + irq_data->bytes.lane_status_updated.raw = tmp[DP_LANE_ALIGN_STATUS_UPDATED_ESI - DP_SINK_COUNT_ESI]; + irq_data->bytes.sink_status.raw = tmp[DP_SINK_STATUS_ESI - DP_SINK_COUNT_ESI]; + } + + return retval; +} + +static bool hpd_rx_irq_check_link_loss_status( + struct dc_link *link, + union hpd_irq_data *hpd_irq_dpcd_data) +{ + uint8_t irq_reg_rx_power_state = 0; + enum dc_status dpcd_result = DC_ERROR_UNEXPECTED; + union lane_status lane_status; + uint32_t lane; + bool sink_status_changed; + bool return_code; + + sink_status_changed = false; + return_code = false; + + if (link->cur_link_settings.lane_count == 0) + return return_code; + + /*1. Check that Link Status changed, before re-training.*/ + + /*parse lane status*/ + for (lane = 0; lane < link->cur_link_settings.lane_count; lane++) { + /* check status of lanes 0,1 + * changed DpcdAddress_Lane01Status (0x202) + */ + lane_status.raw = get_nibble_at_index( + &hpd_irq_dpcd_data->bytes.lane01_status.raw, + lane); + + if (!lane_status.bits.CHANNEL_EQ_DONE_0 || + !lane_status.bits.CR_DONE_0 || + !lane_status.bits.SYMBOL_LOCKED_0) { + /* if one of the channel equalization, clock + * recovery or symbol lock is dropped + * consider it as (link has been + * dropped) dp sink status has changed + */ + sink_status_changed = true; + break; + } + } + + /* Check interlane align.*/ + if (sink_status_changed || + !hpd_irq_dpcd_data->bytes.lane_status_updated.bits.INTERLANE_ALIGN_DONE) { + + DC_LOG_HW_HPD_IRQ("%s: Link Status changed.\n", __func__); + + return_code = true; + + /*2. Check that we can handle interrupt: Not in FS DOS, + * Not in "Display Timeout" state, Link is trained. + */ + dpcd_result = core_link_read_dpcd(link, + DP_SET_POWER, + &irq_reg_rx_power_state, + sizeof(irq_reg_rx_power_state)); + + if (dpcd_result != DC_OK) { + DC_LOG_HW_HPD_IRQ("%s: DPCD read failed to obtain power state.\n", + __func__); + } else { + if (irq_reg_rx_power_state != DP_SET_POWER_D0) + return_code = false; + } + } + + return return_code; +} + bool dp_verify_link_cap( struct dc_link *link, struct dc_link_settings *known_limit_link_setting, @@ -1104,12 +1228,14 @@ bool dp_verify_link_cap( struct clock_source *dp_cs; enum clock_source_id dp_cs_id = CLOCK_SOURCE_ID_EXTERNAL; enum link_training_result status; + union hpd_irq_data irq_data; if (link->dc->debug.skip_detection_link_training) { link->verified_link_cap = *known_limit_link_setting; return true; } + memset(&irq_data, 0, sizeof(irq_data)); success = false; skip_link_training = false; @@ -1168,9 +1294,15 @@ bool dp_verify_link_cap( (*fail_count)++; } - if (success) + if (success) { link->verified_link_cap = *cur; - + udelay(1000); + if (read_hpd_rx_irq_data(link, &irq_data) == DC_OK) + if (hpd_rx_irq_check_link_loss_status( + link, + &irq_data)) + (*fail_count)++; + } /* always disable the link before trying another * setting or before returning we'll enable it later * based on the actual mode we're driving @@ -1419,7 +1551,7 @@ static uint32_t bandwidth_in_kbps_from_timing( ASSERT(bits_per_channel != 0); - kbps = timing->pix_clk_khz; + kbps = timing->pix_clk_100hz / 10; kbps *= bits_per_channel; if (timing->flags.Y_ONLY != 1) { @@ -1461,7 +1593,7 @@ bool dp_validate_mode_timing( const struct dc_link_settings *link_setting; /*always DP fail safe mode*/ - if (timing->pix_clk_khz == (uint32_t) 25175 && + if ((timing->pix_clk_100hz / 10) == (uint32_t) 25175 && timing->h_addressable == (uint32_t) 640 && timing->v_addressable == (uint32_t) 480) return true; @@ -1511,7 +1643,7 @@ void decide_link_settings(struct dc_stream_state *stream, req_bw = bandwidth_in_kbps_from_timing(&stream->timing); - link = stream->sink->link; + link = stream->link; /* if preferred is specified through AMDDP, use it, if it's enough * to drive the mode @@ -1533,7 +1665,7 @@ void decide_link_settings(struct dc_stream_state *stream, } /* EDP use the link cap setting */ - if (stream->sink->sink_signal == SIGNAL_TYPE_EDP) { + if (link->connector_signal == SIGNAL_TYPE_EDP) { *link_setting = link->verified_link_cap; return; } @@ -1572,122 +1704,6 @@ void decide_link_settings(struct dc_stream_state *stream, } /*************************Short Pulse IRQ***************************/ - -static bool hpd_rx_irq_check_link_loss_status( - struct dc_link *link, - union hpd_irq_data *hpd_irq_dpcd_data) -{ - uint8_t irq_reg_rx_power_state = 0; - enum dc_status dpcd_result = DC_ERROR_UNEXPECTED; - union lane_status lane_status; - uint32_t lane; - bool sink_status_changed; - bool return_code; - - sink_status_changed = false; - return_code = false; - - if (link->cur_link_settings.lane_count == 0) - return return_code; - - /*1. Check that Link Status changed, before re-training.*/ - - /*parse lane status*/ - for (lane = 0; lane < link->cur_link_settings.lane_count; lane++) { - /* check status of lanes 0,1 - * changed DpcdAddress_Lane01Status (0x202) - */ - lane_status.raw = get_nibble_at_index( - &hpd_irq_dpcd_data->bytes.lane01_status.raw, - lane); - - if (!lane_status.bits.CHANNEL_EQ_DONE_0 || - !lane_status.bits.CR_DONE_0 || - !lane_status.bits.SYMBOL_LOCKED_0) { - /* if one of the channel equalization, clock - * recovery or symbol lock is dropped - * consider it as (link has been - * dropped) dp sink status has changed - */ - sink_status_changed = true; - break; - } - } - - /* Check interlane align.*/ - if (sink_status_changed || - !hpd_irq_dpcd_data->bytes.lane_status_updated.bits.INTERLANE_ALIGN_DONE) { - - DC_LOG_HW_HPD_IRQ("%s: Link Status changed.\n", __func__); - - return_code = true; - - /*2. Check that we can handle interrupt: Not in FS DOS, - * Not in "Display Timeout" state, Link is trained. - */ - dpcd_result = core_link_read_dpcd(link, - DP_SET_POWER, - &irq_reg_rx_power_state, - sizeof(irq_reg_rx_power_state)); - - if (dpcd_result != DC_OK) { - DC_LOG_HW_HPD_IRQ("%s: DPCD read failed to obtain power state.\n", - __func__); - } else { - if (irq_reg_rx_power_state != DP_SET_POWER_D0) - return_code = false; - } - } - - return return_code; -} - -static enum dc_status read_hpd_rx_irq_data( - struct dc_link *link, - union hpd_irq_data *irq_data) -{ - static enum dc_status retval; - - /* The HW reads 16 bytes from 200h on HPD, - * but if we get an AUX_DEFER, the HW cannot retry - * and this causes the CTS tests 4.3.2.1 - 3.2.4 to - * fail, so we now explicitly read 6 bytes which is - * the req from the above mentioned test cases. - * - * For DP 1.4 we need to read those from 2002h range. - */ - if (link->dpcd_caps.dpcd_rev.raw < DPCD_REV_14) - retval = core_link_read_dpcd( - link, - DP_SINK_COUNT, - irq_data->raw, - sizeof(union hpd_irq_data)); - else { - /* Read 14 bytes in a single read and then copy only the required fields. - * This is more efficient than doing it in two separate AUX reads. */ - - uint8_t tmp[DP_SINK_STATUS_ESI - DP_SINK_COUNT_ESI + 1]; - - retval = core_link_read_dpcd( - link, - DP_SINK_COUNT_ESI, - tmp, - sizeof(tmp)); - - if (retval != DC_OK) - return retval; - - irq_data->bytes.sink_cnt.raw = tmp[DP_SINK_COUNT_ESI - DP_SINK_COUNT_ESI]; - irq_data->bytes.device_service_irq.raw = tmp[DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 - DP_SINK_COUNT_ESI]; - irq_data->bytes.lane01_status.raw = tmp[DP_LANE0_1_STATUS_ESI - DP_SINK_COUNT_ESI]; - irq_data->bytes.lane23_status.raw = tmp[DP_LANE2_3_STATUS_ESI - DP_SINK_COUNT_ESI]; - irq_data->bytes.lane_status_updated.raw = tmp[DP_LANE_ALIGN_STATUS_UPDATED_ESI - DP_SINK_COUNT_ESI]; - irq_data->bytes.sink_status.raw = tmp[DP_SINK_STATUS_ESI - DP_SINK_COUNT_ESI]; - } - - return retval; -} - static bool allow_hpd_rx_irq(const struct dc_link *link) { /* @@ -1995,11 +2011,7 @@ static void handle_automated_test(struct dc_link *link) dp_test_send_phy_test_pattern(link); test_response.bits.ACK = 1; } - if (!test_request.raw) - /* no requests, revert all test signals - * TODO: revert all test signals - */ - test_response.bits.ACK = 1; + /* send request acknowledgment */ if (test_response.bits.ACK) core_link_write_dpcd( @@ -2196,7 +2208,7 @@ static void get_active_converter_info( } if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_11) { - uint8_t det_caps[4]; + uint8_t det_caps[16]; /* CTS 4.2.2.7 expects source to read Detailed Capabilities Info : 00080h-0008F.*/ union dwnstream_port_caps_byte0 *port_caps = (union dwnstream_port_caps_byte0 *)det_caps; core_link_read_dpcd(link, DP_DOWNSTREAM_PORT_0, @@ -2240,7 +2252,8 @@ static void get_active_converter_info( translate_dpcd_max_bpc( hdmi_color_caps.bits.MAX_BITS_PER_COLOR_COMPONENT); - link->dpcd_caps.dongle_caps.extendedCapValid = true; + if (link->dpcd_caps.dongle_caps.dp_hdmi_max_pixel_clk != 0) + link->dpcd_caps.dongle_caps.extendedCapValid = true; } break; @@ -2371,11 +2384,22 @@ static bool retrieve_link_cap(struct dc_link *link) dpcd_data[DP_TRAINING_AUX_RD_INTERVAL]; if (aux_rd_interval.bits.EXT_RECIEVER_CAP_FIELD_PRESENT == 1) { - core_link_read_dpcd( + uint8_t ext_cap_data[16]; + + memset(ext_cap_data, '\0', sizeof(ext_cap_data)); + for (i = 0; i < read_dpcd_retry_cnt; i++) { + status = core_link_read_dpcd( link, DP_DP13_DPCD_REV, - dpcd_data, - sizeof(dpcd_data)); + ext_cap_data, + sizeof(ext_cap_data)); + if (status == DC_OK) { + memcpy(dpcd_data, ext_cap_data, sizeof(dpcd_data)); + break; + } + } + if (status != DC_OK) + dm_error("%s: Read extend caps data failed, use cap from dpcd 0.\n", __func__); } } @@ -2474,13 +2498,72 @@ bool detect_dp_sink_caps(struct dc_link *link) /* TODO save sink caps in link->sink */ } +enum dc_link_rate linkRateInKHzToLinkRateMultiplier(uint32_t link_rate_in_khz) +{ + enum dc_link_rate link_rate; + // LinkRate is normally stored as a multiplier of 0.27 Gbps per lane. Do the translation. + switch (link_rate_in_khz) { + case 1620000: + link_rate = LINK_RATE_LOW; // Rate_1 (RBR) - 1.62 Gbps/Lane + break; + case 2160000: + link_rate = LINK_RATE_RATE_2; // Rate_2 - 2.16 Gbps/Lane + break; + case 2430000: + link_rate = LINK_RATE_RATE_3; // Rate_3 - 2.43 Gbps/Lane + break; + case 2700000: + link_rate = LINK_RATE_HIGH; // Rate_4 (HBR) - 2.70 Gbps/Lane + break; + case 3240000: + link_rate = LINK_RATE_RBR2; // Rate_5 (RBR2) - 3.24 Gbps/Lane + break; + case 4320000: + link_rate = LINK_RATE_RATE_6; // Rate_6 - 4.32 Gbps/Lane + break; + case 5400000: + link_rate = LINK_RATE_HIGH2; // Rate_7 (HBR2) - 5.40 Gbps/Lane + break; + case 8100000: + link_rate = LINK_RATE_HIGH3; // Rate_8 (HBR3) - 8.10 Gbps/Lane + break; + default: + link_rate = LINK_RATE_UNKNOWN; + break; + } + return link_rate; +} + void detect_edp_sink_caps(struct dc_link *link) { - retrieve_link_cap(link); + uint8_t supported_link_rates[16] = {0}; + uint32_t entry; + uint32_t link_rate_in_khz; + enum dc_link_rate link_rate = LINK_RATE_UNKNOWN; - if (link->reported_link_cap.link_rate == LINK_RATE_UNKNOWN) - link->reported_link_cap.link_rate = LINK_RATE_HIGH2; + retrieve_link_cap(link); + if (link->dpcd_caps.dpcd_rev.raw >= DPCD_REV_14) { + // Read DPCD 00010h - 0001Fh 16 bytes at one shot + core_link_read_dpcd(link, DP_SUPPORTED_LINK_RATES, + supported_link_rates, sizeof(supported_link_rates)); + + link->dpcd_caps.link_rate_set = 0; + for (entry = 0; entry < 16; entry += 2) { + // DPCD register reports per-lane link rate = 16-bit link rate capability + // value X 200 kHz. Need multipler to find link rate in kHz. + link_rate_in_khz = (supported_link_rates[entry+1] * 0x100 + + supported_link_rates[entry]) * 200; + + if (link_rate_in_khz != 0) { + link_rate = linkRateInKHzToLinkRateMultiplier(link_rate_in_khz); + if (link->reported_link_cap.link_rate < link_rate) { + link->reported_link_cap.link_rate = link_rate; + link->dpcd_caps.link_rate_set = entry; + } + } + } + } link->verified_link_cap = link->reported_link_cap; } @@ -2602,7 +2685,7 @@ bool dc_link_dp_set_test_pattern( memset(&training_pattern, 0, sizeof(training_pattern)); for (i = 0; i < MAX_PIPES; i++) { - if (pipes[i].stream->sink->link == link) { + if (pipes[i].stream->link == link) { pipe_ctx = &pipes[i]; break; } |