diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dc_hw_types.h')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dc/dc_hw_types.h | 174 |
1 files changed, 166 insertions, 8 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h index 52355fe6994c..848db8676adf 100644 --- a/drivers/gpu/drm/amd/display/dc/dc_hw_types.h +++ b/drivers/gpu/drm/amd/display/dc/dc_hw_types.h @@ -201,8 +201,9 @@ enum surface_pixel_format { SURFACE_PIXEL_FORMAT_VIDEO_420_YCrCb, SURFACE_PIXEL_FORMAT_VIDEO_420_10bpc_YCbCr, SURFACE_PIXEL_FORMAT_VIDEO_420_10bpc_YCrCb, + SURFACE_PIXEL_FORMAT_SUBSAMPLE_END, + SURFACE_PIXEL_FORMAT_VIDEO_ACrYCb2101010 = SURFACE_PIXEL_FORMAT_SUBSAMPLE_END, - SURFACE_PIXEL_FORMAT_VIDEO_ACrYCb2101010, SURFACE_PIXEL_FORMAT_VIDEO_CrYCbA1010102, SURFACE_PIXEL_FORMAT_VIDEO_AYCrCb8888, SURFACE_PIXEL_FORMAT_INVALID @@ -235,6 +236,22 @@ enum pixel_format { PIXEL_FORMAT_UNKNOWN }; +/* + * This structure holds a surface address. There could be multiple addresses + * in cases such as Stereo 3D, Planar YUV, etc. Other per-flip attributes such + * as frame durations and DCC format can also be set. + */ +#define DC_MAX_DIRTY_RECTS 3 +struct dc_flip_addrs { + struct dc_plane_address address; + unsigned int flip_timestamp_in_us; + bool flip_immediate; + /* TODO: add flip duration for FreeSync */ + bool triplebuffer_flips; + unsigned int dirty_rect_count; + struct rect dirty_rects[DC_MAX_DIRTY_RECTS]; +}; + enum tile_split_values { DC_DISPLAY_MICRO_TILING = 0x0, DC_THIN_MICRO_TILING = 0x1, @@ -400,19 +417,43 @@ enum dc_scan_direction { SCAN_DIRECTION_VERTICAL = 2, /* 90, 270 rotation */ }; +/** + * struct dc_cursor_position: Hardware cursor data. + * + * This struct keeps the action information related to the cursor that will be + * sent and received from our DC core. + */ struct dc_cursor_position { + /** + * @x: It represents the top left abscissa coordinate of the cursor. + */ uint32_t x; + + /** + * @y: It is the top ordinate of the cursor coordinate. + */ uint32_t y; + /** + * @x_hotspot: Define the abscissa point where mouse click happens. + */ uint32_t x_hotspot; + + /** + * @y_hotspot: Define the ordinate point where mouse click happens. + */ uint32_t y_hotspot; - /* - * This parameter indicates whether HW cursor should be enabled + /** + * @enable: This parameter indicates whether hardware cursor should be + * enabled. */ bool enable; - /* Translate cursor x/y by the source rectangle for each plane. */ + /** + * @translate_by_source: Translate cursor x/y by the source rectangle + * for each plane. + */ bool translate_by_source; }; @@ -477,7 +518,9 @@ struct dc_gamma { /* Used by both ipp amd opp functions*/ /* TODO: to be consolidated with enum color_space */ -/* +/** + * enum dc_cursor_color_format - DC cursor programming mode + * * This enum is for programming CURSOR_MODE register field. What this register * should be programmed to depends on OS requested cursor shape flags and what * we stored in the cursor surface. @@ -513,17 +556,39 @@ union dc_cursor_attribute_flags { }; struct dc_cursor_attributes { + /** + * @address: This field represents the framebuffer address associated + * with the cursor. It is important to highlight that this address is + * divided into a high and low parts. + */ PHYSICAL_ADDRESS_LOC address; + + /** + * @pitch: Cursor line stride. + */ uint32_t pitch; - /* Width and height should correspond to cursor surface width x heigh */ + /** + * @width: Width should correspond to cursor surface width. + */ uint32_t width; + /** + * @heigh: Height should correspond to cursor surface heigh. + */ uint32_t height; + /** + * @color_format: DC cursor programming mode. + */ enum dc_cursor_color_format color_format; - uint32_t sdr_white_level; // for boosting (SDR) cursor in HDR mode + /** + * @sdr_white_level: Boosting (SDR) cursor in HDR mode. + */ + uint32_t sdr_white_level; - /* In case we support HW Cursor rotation in the future */ + /** + * @rotation_angle: In case we support HW Cursor rotation in the future + */ enum dc_rotation_angle rotation_angle; union dc_cursor_attribute_flags attribute_flags; @@ -741,27 +806,120 @@ struct dc_dsc_config { uint32_t version_minor; /* DSC minor version. Full version is formed as 1.version_minor. */ bool ycbcr422_simple; /* Tell DSC engine to convert YCbCr 4:2:2 to 'YCbCr 4:2:2 simple'. */ int32_t rc_buffer_size; /* DSC RC buffer block size in bytes */ +#if defined(CONFIG_DRM_AMD_DC_DCN) + bool is_frl; /* indicate if DSC is applied based on HDMI FRL sink's capability */ +#endif bool is_dp; /* indicate if DSC is applied based on DP's capability */ + uint32_t mst_pbn; /* pbn of display on dsc mst hub */ }; + +/** + * struct dc_crtc_timing - Timing parameters used to configure DCN blocks + * + * DCN provides multiple signals and parameters that can be used to adjust + * timing parameters, this struct aggregate multiple of these values for easy + * access. In this struct, fields prefixed with h_* are related to horizontal + * timing, and v_* to vertical timing. Keep in mind that when we talk about + * vertical timings, the values, in general, are described in the number of + * lines; on the other hand, the horizontal values are in pixels. + */ struct dc_crtc_timing { + /** + * @h_total: The total number of pixels from the rising edge of HSync + * until the rising edge of the current HSync. + */ uint32_t h_total; + + /** + * @h_border_left: The black pixels related to the left border + */ uint32_t h_border_left; + + /** + * @h_addressable: It is the range of pixels displayed horizontally. + * For example, if the display resolution is 3840@2160, the horizontal + * addressable area is 3840. + */ uint32_t h_addressable; + + /** + * @h_border_right: The black pixels related to the right border + */ uint32_t h_border_right; + + /** + * @h_front_porch: Period (in pixels) between HBlank start and the + * rising edge of HSync. + */ uint32_t h_front_porch; + + /** + * @h_sync_width: HSync duration in pixels. + */ uint32_t h_sync_width; + /** + * @v_total: It is the total number of lines from the rising edge of + * the previous VSync until the rising edge of the current VSync. + * + * |--------------------------| + * +-+ V_TOTAL +-+ + * | | | | + * VSync ---+ +--------- // -----------+ +--- + */ uint32_t v_total; + + /** + * @v_border_top: The black border on the top. + */ uint32_t v_border_top; + + /** + * @v_addressable: It is the range of the scanout at which the + * framebuffer is displayed. For example, if the display resolution is + * 3840@2160, the addressable area is 2160 lines, or if the resolution + * is 1920x1080, the addressable area is 1080 lines. + */ uint32_t v_addressable; + + /** + * @v_border_bottom: The black border on the bottom. + */ uint32_t v_border_bottom; + + /** + * @v_front_porch: Period (in lines) between VBlank start and rising + * edge of VSync. + * +-+ + * VSync | | + * ----------+ +--------... + * +------------------... + * VBlank | + * --+ + * |-------| + * v_front_porch + */ uint32_t v_front_porch; + + /** + * @v_sync_width: VSync signal width in lines. + */ uint32_t v_sync_width; + /** + * @pix_clk_100hz: Pipe pixel precision + * + * This field is used to communicate pixel clocks with 100 Hz accuracy + * from dc_crtc_timing to BIOS command table. + */ uint32_t pix_clk_100hz; + uint32_t min_refresh_in_uhz; + uint32_t vic; uint32_t hdmi_vic; + uint32_t rid; + uint32_t fr_index; enum dc_timing_3d_format timing_3d_format; enum dc_color_depth display_color_depth; enum dc_pixel_encoding pixel_encoding; |