diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c')
-rw-r--r-- | drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c | 104 |
1 files changed, 54 insertions, 50 deletions
diff --git a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c index 4d4ac4ceb1e8..bdf101547484 100644 --- a/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c +++ b/drivers/gpu/drm/amd/display/dc/dcn31/dcn31_hwseq.c @@ -112,7 +112,7 @@ void dcn31_init_hw(struct dc *dc) struct dc_bios *dcb = dc->ctx->dc_bios; struct resource_pool *res_pool = dc->res_pool; uint32_t backlight = MAX_BACKLIGHT_LEVEL; - int i, j; + int i; if (dc->clk_mgr && dc->clk_mgr->funcs->init_clocks) dc->clk_mgr->funcs->init_clocks(dc->clk_mgr); @@ -188,54 +188,23 @@ void dcn31_init_hw(struct dc *dc) /* Check for enabled DIG to identify enabled display */ if (link->link_enc->funcs->is_dig_enabled && - link->link_enc->funcs->is_dig_enabled(link->link_enc)) + link->link_enc->funcs->is_dig_enabled(link->link_enc)) { link->link_status.link_active = true; + if (link->link_enc->funcs->fec_is_active && + link->link_enc->funcs->fec_is_active(link->link_enc)) + link->fec_state = dc_link_fec_enabled; + } } - /* Power gate DSCs */ - for (i = 0; i < res_pool->res_cap->num_dsc; i++) - if (hws->funcs.dsc_pg_control != NULL) - hws->funcs.dsc_pg_control(hws, res_pool->dscs[i]->inst, false); - /* Enables outbox notifications for usb4 dpia */ if (dc->res_pool->usb4_dpia_count) - dmub_enable_outbox_notification(dc); + dmub_enable_outbox_notification(dc->ctx->dmub_srv); /* we want to turn off all dp displays before doing detection */ - if (dc->config.power_down_display_on_boot) { - uint8_t dpcd_power_state = '\0'; - enum dc_status status = DC_ERROR_UNEXPECTED; - - for (i = 0; i < dc->link_count; i++) { - if (dc->links[i]->connector_signal != SIGNAL_TYPE_DISPLAY_PORT) - continue; - - /* if any of the displays are lit up turn them off */ - status = core_link_read_dpcd(dc->links[i], DP_SET_POWER, - &dpcd_power_state, sizeof(dpcd_power_state)); - if (status == DC_OK && dpcd_power_state == DP_POWER_STATE_D0) { - /* blank dp stream before power off receiver*/ - if (dc->links[i]->ep_type == DISPLAY_ENDPOINT_PHY && - dc->links[i]->link_enc->funcs->get_dig_frontend) { - unsigned int fe; - - fe = dc->links[i]->link_enc->funcs->get_dig_frontend( - dc->links[i]->link_enc); - if (fe == ENGINE_ID_UNKNOWN) - continue; - - for (j = 0; j < dc->res_pool->stream_enc_count; j++) { - if (fe == dc->res_pool->stream_enc[j]->id) { - dc->res_pool->stream_enc[j]->funcs->dp_blank(dc->links[i], - dc->res_pool->stream_enc[j]); - break; - } - } - } - dp_receiver_power_ctrl(dc->links[i], false); - } - } - } + dc_link_blank_all_dp_displays(dc); + + if (hws->funcs.enable_power_gating_plane) + hws->funcs.enable_power_gating_plane(dc->hwseq, true); /* If taking control over from VBIOS, we may want to optimize our first * mode set, so we need to skip powering down pipes until we know which @@ -243,7 +212,29 @@ void dcn31_init_hw(struct dc *dc) * Otherwise, if taking control is not possible, we need to power * everything down. */ - if (dcb->funcs->is_accelerated_mode(dcb) || dc->config.power_down_display_on_boot) { + if (dcb->funcs->is_accelerated_mode(dcb) || !dc->config.seamless_boot_edp_requested) { + + // we want to turn off edp displays if odm is enabled and no seamless boot + if (!dc->caps.seamless_odm) { + for (i = 0; i < dc->res_pool->timing_generator_count; i++) { + struct timing_generator *tg = dc->res_pool->timing_generators[i]; + uint32_t num_opps, opp_id_src0, opp_id_src1; + + num_opps = 1; + if (tg) { + if (tg->funcs->is_tg_enabled(tg) && tg->funcs->get_optc_source) { + tg->funcs->get_optc_source(tg, &num_opps, + &opp_id_src0, &opp_id_src1); + } + } + + if (num_opps > 1) { + dc_link_blank_all_edp_displays(dc); + break; + } + } + } + hws->funcs.init_pipes(dc, dc->current_state); if (dc->res_pool->hubbub->funcs->allow_self_refresh_control) dc->res_pool->hubbub->funcs->allow_self_refresh_control(dc->res_pool->hubbub, @@ -286,8 +277,6 @@ void dcn31_init_hw(struct dc *dc) REG_UPDATE(DCFCLK_CNTL, DCFCLK_GATE_DIS, 0); } - if (hws->funcs.enable_power_gating_plane) - hws->funcs.enable_power_gating_plane(dc->hwseq, true); if (!dcb->funcs->is_accelerated_mode(dcb) && dc->res_pool->hubbub->funcs->init_watermarks) dc->res_pool->hubbub->funcs->init_watermarks(dc->res_pool->hubbub); @@ -376,22 +365,32 @@ void dcn31_enable_power_gating_plane( bool enable) { bool force_on = true; /* disable power gating */ + uint32_t org_ip_request_cntl = 0; - if (enable) + if (enable && !hws->ctx->dc->debug.disable_hubp_power_gate) force_on = false; + REG_GET(DC_IP_REQUEST_CNTL, IP_REQUEST_EN, &org_ip_request_cntl); + if (org_ip_request_cntl == 0) + REG_SET(DC_IP_REQUEST_CNTL, 0, IP_REQUEST_EN, 1); /* DCHUBP0/1/2/3/4/5 */ REG_UPDATE(DOMAIN0_PG_CONFIG, DOMAIN_POWER_FORCEON, force_on); REG_UPDATE(DOMAIN2_PG_CONFIG, DOMAIN_POWER_FORCEON, force_on); - /* DPP0/1/2/3/4/5 */ REG_UPDATE(DOMAIN1_PG_CONFIG, DOMAIN_POWER_FORCEON, force_on); REG_UPDATE(DOMAIN3_PG_CONFIG, DOMAIN_POWER_FORCEON, force_on); + force_on = true; /* disable power gating */ + if (enable && !hws->ctx->dc->debug.disable_dsc_power_gate) + force_on = false; + /* DCS0/1/2/3/4/5 */ REG_UPDATE(DOMAIN16_PG_CONFIG, DOMAIN_POWER_FORCEON, force_on); REG_UPDATE(DOMAIN17_PG_CONFIG, DOMAIN_POWER_FORCEON, force_on); REG_UPDATE(DOMAIN18_PG_CONFIG, DOMAIN_POWER_FORCEON, force_on); + + if (org_ip_request_cntl == 0) + REG_SET(DC_IP_REQUEST_CNTL, 0, IP_REQUEST_EN, 0); } void dcn31_update_info_frame(struct pipe_ctx *pipe_ctx) @@ -457,12 +456,15 @@ void dcn31_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool p { uint32_t power_gate = power_on ? 0 : 1; uint32_t pwr_status = power_on ? 0 : 2; - + uint32_t org_ip_request_cntl; if (hws->ctx->dc->debug.disable_hubp_power_gate) return; if (REG(DOMAIN0_PG_CONFIG) == 0) return; + REG_GET(DC_IP_REQUEST_CNTL, IP_REQUEST_EN, &org_ip_request_cntl); + if (org_ip_request_cntl == 0) + REG_SET(DC_IP_REQUEST_CNTL, 0, IP_REQUEST_EN, 1); switch (hubp_inst) { case 0: @@ -485,6 +487,8 @@ void dcn31_hubp_pg_control(struct dce_hwseq *hws, unsigned int hubp_inst, bool p BREAK_TO_DEBUGGER(); break; } + if (org_ip_request_cntl == 0) + REG_SET(DC_IP_REQUEST_CNTL, 0, IP_REQUEST_EN, 0); } int dcn31_init_sys_ctx(struct dce_hwseq *hws, struct dc *dc, struct dc_phy_addr_space_config *pa_config) @@ -531,11 +535,11 @@ static void dcn31_reset_back_end_for_pipe( pipe_ctx->stream_res.tg, OPTC_DSC_DISABLED, 0, 0); pipe_ctx->stream_res.tg->funcs->disable_crtc(pipe_ctx->stream_res.tg); - pipe_ctx->stream_res.tg->funcs->enable_optc_clock(pipe_ctx->stream_res.tg, false); if (pipe_ctx->stream_res.tg->funcs->set_odm_bypass) pipe_ctx->stream_res.tg->funcs->set_odm_bypass( pipe_ctx->stream_res.tg, &pipe_ctx->stream->timing); + pipe_ctx->stream->link->phy_state.symclk_ref_cnts.otg = 0; if (pipe_ctx->stream_res.tg->funcs->set_drr) pipe_ctx->stream_res.tg->funcs->set_drr( @@ -609,7 +613,7 @@ void dcn31_reset_hw_ctx_wrap( } /* New dc_state in the process of being applied to hardware. */ - dc->current_state->res_ctx.link_enc_cfg_ctx.mode = LINK_ENC_CFG_TRANSIENT; + link_enc_cfg_set_transient_mode(dc, dc->current_state, context); } void dcn31_setup_hpo_hw_control(const struct dce_hwseq *hws, bool enable) |