diff options
Diffstat (limited to 'drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h')
| -rw-r--r-- | drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h | 841 |
1 files changed, 787 insertions, 54 deletions
diff --git a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h index c29a67ccef17..7a8f61517424 100644 --- a/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h +++ b/drivers/gpu/drm/amd/display/dmub/inc/dmub_cmd.h @@ -44,24 +44,6 @@ #endif // defined(_TEST_HARNESS) || defined(FPGA_USB4) -/* Firmware versioning. */ -#ifdef DMUB_EXPOSE_VERSION -#define DMUB_FW_VERSION_GIT_HASH 0x1d82d23e -#define DMUB_FW_VERSION_MAJOR 0 -#define DMUB_FW_VERSION_MINOR 0 -#define DMUB_FW_VERSION_REVISION 91 -#define DMUB_FW_VERSION_TEST 0 -#define DMUB_FW_VERSION_VBIOS 0 -#define DMUB_FW_VERSION_HOTFIX 0 -#define DMUB_FW_VERSION_UCODE (((DMUB_FW_VERSION_MAJOR & 0xFF) << 24) | \ - ((DMUB_FW_VERSION_MINOR & 0xFF) << 16) | \ - ((DMUB_FW_VERSION_REVISION & 0xFF) << 8) | \ - ((DMUB_FW_VERSION_TEST & 0x1) << 7) | \ - ((DMUB_FW_VERSION_VBIOS & 0x1) << 6) | \ - (DMUB_FW_VERSION_HOTFIX & 0x3F)) - -#endif - //<DMUB_TYPES>================================================================== /* Basic type definitions. */ @@ -110,6 +92,9 @@ */ #define NUM_BL_CURVE_SEGS 16 +/* Maximum number of SubVP streams */ +#define DMUB_MAX_SUBVP_STREAMS 2 + /* Maximum number of streams on any ASIC. */ #define DMUB_MAX_STREAMS 6 @@ -120,6 +105,11 @@ #define TRACE_BUFFER_ENTRY_OFFSET 16 /** + * Maximum number of dirty rects supported by FW. + */ +#define DMUB_MAX_DIRTY_RECTS 3 + +/** * * PSR control version legacy */ @@ -173,13 +163,6 @@ extern "C" { #endif /** - * Number of nanoseconds per DMUB tick. - * DMCUB_TIMER_CURRENT increments in DMUB ticks, which are 10ns by default. - * If DMCUB_TIMER_WINDOW is non-zero this will no longer be true. - */ -#define NS_PER_DMUB_TICK 10 - -/** * union dmub_addr - DMUB physical/virtual 64-bit address. */ union dmub_addr { @@ -191,6 +174,31 @@ union dmub_addr { }; /** + * Dirty rect definition. + */ +struct dmub_rect { + /** + * Dirty rect x offset. + */ + uint32_t x; + + /** + * Dirty rect y offset. + */ + uint32_t y; + + /** + * Dirty rect width. + */ + uint32_t width; + + /** + * Dirty rect height. + */ + uint32_t height; +}; + +/** * Flags that can be set by driver to change some PSR behaviour. */ union dmub_psr_debug_flags { @@ -202,16 +210,21 @@ union dmub_psr_debug_flags { * Enable visual confirm in FW. */ uint32_t visual_confirm : 1; + + /** + * Force all selective updates to bw full frame updates. + */ + uint32_t force_full_frame_update : 1; + /** * Use HW Lock Mgr object to do HW locking in FW. */ uint32_t use_hw_lock_mgr : 1; /** - * Unused. - * TODO: Remove. + * Use TPS3 signal when restore main link. */ - uint32_t log_line_nums : 1; + uint32_t force_wakeup_by_tps3 : 1; } bitfields; /** @@ -221,15 +234,25 @@ union dmub_psr_debug_flags { }; /** - * DMUB feature capabilities. - * After DMUB init, driver will query FW capabilities prior to enabling certain features. + * DMUB visual confirm color */ struct dmub_feature_caps { /** * Max PSR version supported by FW. */ uint8_t psr; - uint8_t reserved[7]; + uint8_t fw_assisted_mclk_switch; + uint8_t reserved[6]; +}; + +struct dmub_visual_confirm_color { + /** + * Maximum 10 bits color value + */ + uint16_t color_r_cr; + uint16_t color_g_y; + uint16_t color_b_cb; + uint16_t panel_inst; }; #if defined(__cplusplus) @@ -375,8 +398,11 @@ union dmub_fw_boot_options { /**< 1 if all root clock gating is enabled and low power memory is enabled*/ uint32_t power_optimization: 1; uint32_t diag_env: 1; /* 1 if diagnostic environment */ + uint32_t gpint_scratch8: 1; /* 1 if GPINT is in scratch8*/ + uint32_t usb4_cm_version: 1; /**< 1 CM support */ + uint32_t dpia_hpd_int_enable_supported: 1; /* 1 if dpia hpd int enable supported */ - uint32_t reserved : 19; /**< reserved */ + uint32_t reserved : 16; /**< reserved */ } bits; /**< boot bits */ uint32_t all; /**< 32-bit access to bits */ }; @@ -416,7 +442,14 @@ enum dmub_cmd_vbios_type { * Enables or disables power gating. */ DMUB_CMD__VBIOS_ENABLE_DISP_POWER_GATING = 3, + /** + * Controls embedded panels. + */ DMUB_CMD__VBIOS_LVTMA_CONTROL = 15, + /** + * Query DP alt status on a transmitter. + */ + DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT = 26, }; //============================================================================== @@ -524,7 +557,7 @@ union dmub_inbox0_cmd_lock_hw { uint32_t command_code: 8; /* NOTE: Must be have enough bits to match: enum hw_lock_client */ - uint32_t hw_lock_client: 1; + uint32_t hw_lock_client: 2; /* NOTE: Below fields must match with: struct dmub_hw_lock_inst_flags */ uint32_t otg_inst: 3; @@ -539,7 +572,7 @@ union dmub_inbox0_cmd_lock_hw { uint32_t lock: 1; /**< Lock */ uint32_t should_release: 1; /**< Release */ - uint32_t reserved: 8; /**< Reserved for extending more clients, HW, etc. */ + uint32_t reserved: 7; /**< Reserved for extending more clients, HW, etc. */ } bits; uint32_t all; }; @@ -622,6 +655,10 @@ enum dmub_cmd_type { */ DMUB_CMD__QUERY_FEATURE_CAPS = 6, /** + * Command type used to get visual confirm color. + */ + DMUB_CMD__GET_VISUAL_CONFIRM_COLOR = 8, + /** * Command type used for all PSR commands. */ DMUB_CMD__PSR = 64, @@ -634,6 +671,14 @@ enum dmub_cmd_type { */ DMUB_CMD__ABM = 66, /** + * Command type used to update dirty rects in FW. + */ + DMUB_CMD__UPDATE_DIRTY_RECT = 67, + /** + * Command type used to update cursor info in FW. + */ + DMUB_CMD__UPDATE_CURSOR_INFO = 68, + /** * Command type used for HW locking in FW. */ DMUB_CMD__HW_LOCK = 69, @@ -645,6 +690,7 @@ enum dmub_cmd_type { * Command type used for OUTBOX1 notification enable */ DMUB_CMD__OUTBOX1_ENABLE = 71, + /** * Command type used for all idle optimization commands. */ @@ -658,6 +704,13 @@ enum dmub_cmd_type { */ DMUB_CMD__PANEL_CNTL = 74, /** + * Command type used for <TODO:description> + */ + DMUB_CMD__CAB_FOR_SS = 75, + + DMUB_CMD__FW_ASSISTED_MCLK_SWITCH = 76, + + /** * Command type used for interfacing with DPIA. */ DMUB_CMD__DPIA = 77, @@ -666,8 +719,22 @@ enum dmub_cmd_type { */ DMUB_CMD__EDID_CEA = 79, /** + * Command type used for getting usbc cable ID + */ + DMUB_CMD_GET_USBC_CABLE_ID = 81, + /** + * Command type used to query HPD state. + */ + DMUB_CMD__QUERY_HPD_STATE = 82, + /** * Command type used for all VBIOS interface commands. */ + + /** + * Command type used to set DPIA HPD interrupt state + */ + DMUB_CMD__DPIA_HPD_INT_ENABLE = 86, + DMUB_CMD__VBIOS = 128, }; @@ -886,6 +953,111 @@ struct dmub_rb_cmd_mall { }; /** + * enum dmub_cmd_cab_type - TODO: + */ +enum dmub_cmd_cab_type { + DMUB_CMD__CAB_NO_IDLE_OPTIMIZATION = 0, + DMUB_CMD__CAB_NO_DCN_REQ = 1, + DMUB_CMD__CAB_DCN_SS_FIT_IN_CAB = 2, +}; + +/** + * struct dmub_rb_cmd_cab_for_ss - TODO: + */ +struct dmub_rb_cmd_cab_for_ss { + struct dmub_cmd_header header; + uint8_t cab_alloc_ways; /* total number of ways */ + uint8_t debug_bits; /* debug bits */ +}; + +enum mclk_switch_mode { + NONE = 0, + FPO = 1, + SUBVP = 2, + VBLANK = 3, +}; + +/* Per pipe struct which stores the MCLK switch mode + * data to be sent to DMUB. + * Named "v2" for now -- once FPO and SUBVP are fully merged + * the type name can be updated + */ +struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 { + union { + struct { + uint32_t pix_clk_100hz; + uint16_t main_vblank_start; + uint16_t main_vblank_end; + uint16_t mall_region_lines; + uint16_t prefetch_lines; + uint16_t prefetch_to_mall_start_lines; + uint16_t processing_delay_lines; + uint16_t htotal; // required to calculate line time for multi-display cases + uint16_t vtotal; + uint8_t main_pipe_index; + uint8_t phantom_pipe_index; + /* Since the microschedule is calculated in terms of OTG lines, + * include any scaling factors to make sure when we get accurate + * conversion when programming MALL_START_LINE (which is in terms + * of HUBP lines). If 4K is being downscaled to 1080p, scale factor + * is 1/2 (numerator = 1, denominator = 2). + */ + uint8_t scale_factor_numerator; + uint8_t scale_factor_denominator; + uint8_t is_drr; + uint8_t main_split_pipe_index; + uint8_t phantom_split_pipe_index; + } subvp_data; + + struct { + uint32_t pix_clk_100hz; + uint16_t vblank_start; + uint16_t vblank_end; + uint16_t vstartup_start; + uint16_t vtotal; + uint16_t htotal; + uint8_t vblank_pipe_index; + uint8_t padding[2]; + struct { + uint8_t drr_in_use; + uint8_t drr_window_size_ms; // Indicates largest VMIN/VMAX adjustment per frame + uint16_t min_vtotal_supported; // Min VTOTAL that supports switching in VBLANK + uint16_t max_vtotal_supported; // Max VTOTAL that can support SubVP static scheduling + uint8_t use_ramping; // Use ramping or not + } drr_info; // DRR considered as part of SubVP + VBLANK case + } vblank_data; + } pipe_config; + + /* - subvp_data in the union (pipe_config) takes up 27 bytes. + * - Make the "mode" field a uint8_t instead of enum so we only use 1 byte (only + * for the DMCUB command, cast to enum once we populate the DMCUB subvp state). + */ + uint8_t mode; // enum mclk_switch_mode +}; + +/** + * Config data for Sub-VP and FPO + * Named "v2" for now -- once FPO and SUBVP are fully merged + * the type name can be updated + */ +struct dmub_cmd_fw_assisted_mclk_switch_config_v2 { + uint16_t watermark_a_cache; + uint8_t vertical_int_margin_us; + uint8_t pstate_allow_width_us; + struct dmub_cmd_fw_assisted_mclk_switch_pipe_data_v2 pipe_data[DMUB_MAX_SUBVP_STREAMS]; +}; + +/** + * DMUB rb command definition for Sub-VP and FPO + * Named "v2" for now -- once FPO and SUBVP are fully merged + * the type name can be updated + */ +struct dmub_rb_cmd_fw_assisted_mclk_switch_v2 { + struct dmub_cmd_header header; + struct dmub_cmd_fw_assisted_mclk_switch_config_v2 config_data; +}; + +/** * enum dmub_cmd_idle_opt_type - Idle optimization command type. */ enum dmub_cmd_idle_opt_type { @@ -1091,6 +1263,14 @@ struct dmub_rb_cmd_set_mst_alloc_slots { }; /** + * DMUB command structure for DPIA HPD int enable control. + */ +struct dmub_rb_cmd_dpia_hpd_int_enable { + struct dmub_cmd_header header; /* header */ + uint32_t enable; /* dpia hpd interrupt enable */ +}; + +/** * struct dmub_rb_cmd_dpphy_init - DPPHY init. */ struct dmub_rb_cmd_dpphy_init { @@ -1364,6 +1544,31 @@ struct dmub_rb_cmd_dp_set_config_reply { struct set_config_reply_control_data set_config_reply_control; }; +/** + * Data passed from driver to FW in a DMUB_CMD__QUERY_HPD_STATE command. + */ +struct dmub_cmd_hpd_state_query_data { + uint8_t instance; /**< HPD instance or DPIA instance */ + uint8_t result; /**< For returning HPD state */ + uint16_t pad; /** < Alignment */ + enum aux_channel_type ch_type; /**< enum aux_channel_type */ + enum aux_return_code_type status; /**< for returning the status of command */ +}; + +/** + * Definition of a DMUB_CMD__QUERY_HPD_STATE command. + */ +struct dmub_rb_cmd_query_hpd_state { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__QUERY_HPD_STATE command. + */ + struct dmub_cmd_hpd_state_query_data data; +}; + /* * Command IDs should be treated as stable ABI. * Do not reuse or modify IDs. @@ -1403,11 +1608,27 @@ enum dmub_cmd_psr_type { */ DMUB_CMD__PSR_FORCE_STATIC = 5, /** + * Set vtotal in psr active for FreeSync PSR. + */ + DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE = 6, + /** * Set PSR power option */ DMUB_CMD__SET_PSR_POWER_OPT = 7, }; +enum dmub_cmd_fams_type { + DMUB_CMD__FAMS_SETUP_FW_CTRL = 0, + DMUB_CMD__FAMS_DRR_UPDATE = 1, + DMUB_CMD__HANDLE_SUBVP_CMD = 2, // specifically for SubVP cmd + /** + * For SubVP set manual trigger in FW because it + * triggers DRR_UPDATE_PENDING which SubVP relies + * on (for any SubVP cases that use a DRR display) + */ + DMUB_CMD__FAMS_SET_MANUAL_TRIGGER = 3, +}; + /** * PSR versions. */ @@ -1417,6 +1638,10 @@ enum psr_version { */ PSR_VERSION_1 = 0, /** + * Freesync PSR SU. + */ + PSR_VERSION_SU_1 = 1, + /** * PSR not supported. */ PSR_VERSION_UNSUPPORTED = 0xFFFFFFFF, @@ -1444,6 +1669,78 @@ enum dmub_cmd_mall_type { DMUB_CMD__MALL_ACTION_NO_DF_REQ = 3, }; +/** + * PHY Link rate for DP. + */ +enum phy_link_rate { + /** + * not supported. + */ + PHY_RATE_UNKNOWN = 0, + /** + * Rate_1 (RBR) - 1.62 Gbps/Lane + */ + PHY_RATE_162 = 1, + /** + * Rate_2 - 2.16 Gbps/Lane + */ + PHY_RATE_216 = 2, + /** + * Rate_3 - 2.43 Gbps/Lane + */ + PHY_RATE_243 = 3, + /** + * Rate_4 (HBR) - 2.70 Gbps/Lane + */ + PHY_RATE_270 = 4, + /** + * Rate_5 (RBR2)- 3.24 Gbps/Lane + */ + PHY_RATE_324 = 5, + /** + * Rate_6 - 4.32 Gbps/Lane + */ + PHY_RATE_432 = 6, + /** + * Rate_7 (HBR2)- 5.40 Gbps/Lane + */ + PHY_RATE_540 = 7, + /** + * Rate_8 (HBR3)- 8.10 Gbps/Lane + */ + PHY_RATE_810 = 8, + /** + * UHBR10 - 10.0 Gbps/Lane + */ + PHY_RATE_1000 = 9, + /** + * UHBR13.5 - 13.5 Gbps/Lane + */ + PHY_RATE_1350 = 10, + /** + * UHBR10 - 20.0 Gbps/Lane + */ + PHY_RATE_2000 = 11, +}; + +/** + * enum dmub_phy_fsm_state - PHY FSM states. + * PHY FSM state to transit to during PSR enable/disable. + */ +enum dmub_phy_fsm_state { + DMUB_PHY_FSM_POWER_UP_DEFAULT = 0, + DMUB_PHY_FSM_RESET, + DMUB_PHY_FSM_RESET_RELEASED, + DMUB_PHY_FSM_SRAM_LOAD_DONE, + DMUB_PHY_FSM_INITIALIZED, + DMUB_PHY_FSM_CALIBRATED, + DMUB_PHY_FSM_CALIBRATED_LP, + DMUB_PHY_FSM_CALIBRATED_PG, + DMUB_PHY_FSM_POWER_DOWN, + DMUB_PHY_FSM_PLL_EN, + DMUB_PHY_FSM_TX_EN, + DMUB_PHY_FSM_FAST_LP, +}; /** * Data passed from driver to FW in a DMUB_CMD__PSR_COPY_SETTINGS command. @@ -1511,9 +1808,15 @@ struct dmub_cmd_psr_copy_settings_data { */ uint8_t frame_cap_ind; /** - * Explicit padding to 4 byte boundary. + * Granularity of Y offset supported by sink. */ - uint8_t pad[2]; + uint8_t su_y_granularity; + /** + * Indicates whether sink should start capturing + * immediately following active scan line, + * or starting with the 2nd active scan line. + */ + uint8_t line_capture_indication; /** * Multi-display optimizations are implemented on certain ASICs. */ @@ -1524,9 +1827,13 @@ struct dmub_cmd_psr_copy_settings_data { */ uint16_t init_sdp_deadline; /** - * Explicit padding to 4 byte boundary. + * @ rate_control_caps : Indicate FreeSync PSR Sink Capabilities + */ + uint8_t rate_control_caps ; + /* + * Force PSRSU always doing full frame update */ - uint16_t pad2; + uint8_t force_ffu_mode; /** * Length of each horizontal line in us. */ @@ -1550,10 +1857,18 @@ struct dmub_cmd_psr_copy_settings_data { * Currently the support is only for 0 or 1 */ uint8_t panel_inst; + /* + * DSC enable status in driver + */ + uint8_t dsc_enable_status; + /* + * Use FSM state for PSR power up/down + */ + uint8_t use_phy_fsm; /** - * Explicit padding to 4 byte boundary. + * Explicit padding to 2 byte boundary. */ - uint8_t pad3[4]; + uint8_t pad3[2]; }; /** @@ -1616,9 +1931,16 @@ struct dmub_rb_cmd_psr_enable_data { */ uint8_t panel_inst; /** - * Explicit padding to 4 byte boundary. + * Phy state to enter. + * Values to use are defined in dmub_phy_fsm_state */ - uint8_t pad[2]; + uint8_t phy_fsm_state; + /** + * Phy rate for DP - RBR/HBR/HBR2/HBR3. + * Set this using enum phy_link_rate. + * This does not support HDMI/DP2 for now. + */ + uint8_t phy_rate; }; /** @@ -1704,6 +2026,270 @@ struct dmub_rb_cmd_psr_force_static { }; /** + * PSR SU debug flags. + */ +union dmub_psr_su_debug_flags { + /** + * PSR SU debug flags. + */ + struct { + /** + * Update dirty rect in SW only. + */ + uint8_t update_dirty_rect_only : 1; + /** + * Reset the cursor/plane state before processing the call. + */ + uint8_t reset_state : 1; + } bitfields; + + /** + * Union for debug flags. + */ + uint32_t u32All; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__UPDATE_DIRTY_RECT command. + * This triggers a selective update for PSR SU. + */ +struct dmub_cmd_update_dirty_rect_data { + /** + * Dirty rects from OS. + */ + struct dmub_rect src_dirty_rects[DMUB_MAX_DIRTY_RECTS]; + /** + * PSR SU debug flags. + */ + union dmub_psr_su_debug_flags debug_flags; + /** + * OTG HW instance. + */ + uint8_t pipe_idx; + /** + * Number of dirty rects. + */ + uint8_t dirty_rect_count; + /** + * PSR control version. + */ + uint8_t cmd_version; + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; +}; + +/** + * Definition of a DMUB_CMD__UPDATE_DIRTY_RECT command. + */ +struct dmub_rb_cmd_update_dirty_rect { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__UPDATE_DIRTY_RECT command. + */ + struct dmub_cmd_update_dirty_rect_data update_dirty_rect_data; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__UPDATE_CURSOR_INFO command. + */ +union dmub_reg_cursor_control_cfg { + struct { + uint32_t cur_enable: 1; + uint32_t reser0: 3; + uint32_t cur_2x_magnify: 1; + uint32_t reser1: 3; + uint32_t mode: 3; + uint32_t reser2: 5; + uint32_t pitch: 2; + uint32_t reser3: 6; + uint32_t line_per_chunk: 5; + uint32_t reser4: 3; + } bits; + uint32_t raw; +}; +struct dmub_cursor_position_cache_hubp { + union dmub_reg_cursor_control_cfg cur_ctl; + union dmub_reg_position_cfg { + struct { + uint32_t cur_x_pos: 16; + uint32_t cur_y_pos: 16; + } bits; + uint32_t raw; + } position; + union dmub_reg_hot_spot_cfg { + struct { + uint32_t hot_x: 16; + uint32_t hot_y: 16; + } bits; + uint32_t raw; + } hot_spot; + union dmub_reg_dst_offset_cfg { + struct { + uint32_t dst_x_offset: 13; + uint32_t reserved: 19; + } bits; + uint32_t raw; + } dst_offset; +}; + +union dmub_reg_cur0_control_cfg { + struct { + uint32_t cur0_enable: 1; + uint32_t expansion_mode: 1; + uint32_t reser0: 1; + uint32_t cur0_rom_en: 1; + uint32_t mode: 3; + uint32_t reserved: 25; + } bits; + uint32_t raw; +}; +struct dmub_cursor_position_cache_dpp { + union dmub_reg_cur0_control_cfg cur0_ctl; +}; +struct dmub_cursor_position_cfg { + struct dmub_cursor_position_cache_hubp pHubp; + struct dmub_cursor_position_cache_dpp pDpp; + uint8_t pipe_idx; + /* + * Padding is required. To be 4 Bytes Aligned. + */ + uint8_t padding[3]; +}; + +struct dmub_cursor_attribute_cache_hubp { + uint32_t SURFACE_ADDR_HIGH; + uint32_t SURFACE_ADDR; + union dmub_reg_cursor_control_cfg cur_ctl; + union dmub_reg_cursor_size_cfg { + struct { + uint32_t width: 16; + uint32_t height: 16; + } bits; + uint32_t raw; + } size; + union dmub_reg_cursor_settings_cfg { + struct { + uint32_t dst_y_offset: 8; + uint32_t chunk_hdl_adjust: 2; + uint32_t reserved: 22; + } bits; + uint32_t raw; + } settings; +}; +struct dmub_cursor_attribute_cache_dpp { + union dmub_reg_cur0_control_cfg cur0_ctl; +}; +struct dmub_cursor_attributes_cfg { + struct dmub_cursor_attribute_cache_hubp aHubp; + struct dmub_cursor_attribute_cache_dpp aDpp; +}; + +struct dmub_cmd_update_cursor_payload0 { + /** + * Cursor dirty rects. + */ + struct dmub_rect cursor_rect; + /** + * PSR SU debug flags. + */ + union dmub_psr_su_debug_flags debug_flags; + /** + * Cursor enable/disable. + */ + uint8_t enable; + /** + * OTG HW instance. + */ + uint8_t pipe_idx; + /** + * PSR control version. + */ + uint8_t cmd_version; + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /** + * Cursor Position Register. + * Registers contains Hubp & Dpp modules + */ + struct dmub_cursor_position_cfg position_cfg; +}; + +struct dmub_cmd_update_cursor_payload1 { + struct dmub_cursor_attributes_cfg attribute_cfg; +}; + +union dmub_cmd_update_cursor_info_data { + struct dmub_cmd_update_cursor_payload0 payload0; + struct dmub_cmd_update_cursor_payload1 payload1; +}; +/** + * Definition of a DMUB_CMD__UPDATE_CURSOR_INFO command. + */ +struct dmub_rb_cmd_update_cursor_info { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__UPDATE_CURSOR_INFO command. + */ + union dmub_cmd_update_cursor_info_data update_cursor_info_data; +}; + +/** + * Data passed from driver to FW in a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. + */ +struct dmub_cmd_psr_set_vtotal_data { + /** + * 16-bit value dicated by driver that indicates the vtotal in PSR active requirement when screen idle.. + */ + uint16_t psr_vtotal_idle; + /** + * PSR control version. + */ + uint8_t cmd_version; + /** + * Panel Instance. + * Panel isntance to identify which psr_state to use + * Currently the support is only for 0 or 1 + */ + uint8_t panel_inst; + /* + * 16-bit value dicated by driver that indicates the vtotal in PSR active requirement when doing SU/FFU. + */ + uint16_t psr_vtotal_su; + /** + * Explicit padding to 4 byte boundary. + */ + uint8_t pad2[2]; +}; + +/** + * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. + */ +struct dmub_rb_cmd_psr_set_vtotal { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. + */ + struct dmub_cmd_psr_set_vtotal_data psr_set_vtotal_data; +}; + +/** * Data passed from driver to FW in a DMUB_CMD__SET_PSR_POWER_OPT command. */ struct dmub_cmd_psr_set_power_opt_data { @@ -1814,6 +2400,10 @@ enum hw_lock_client { */ HW_LOCK_CLIENT_DRIVER = 0, /** + * PSR SU is the client of HW Lock Manager. + */ + HW_LOCK_CLIENT_PSR_SU = 1, + /** * Invalid client. */ HW_LOCK_CLIENT_INVALID = 0xFFFFFFFF, @@ -2323,14 +2913,35 @@ struct dmub_rb_cmd_query_feature_caps { struct dmub_cmd_query_feature_caps_data query_feature_caps_data; }; +/** + * Data passed from driver to FW in a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. + */ +struct dmub_cmd_visual_confirm_color_data { + /** + * DMUB feature capabilities. + * After DMUB init, driver will query FW capabilities prior to enabling certain features. + */ +struct dmub_visual_confirm_color visual_confirm_color; +}; + +/** + * Definition of a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. + */ +struct dmub_rb_cmd_get_visual_confirm_color { + /** + * Command header. + */ + struct dmub_cmd_header header; + /** + * Data passed from driver to FW in a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. + */ + struct dmub_cmd_visual_confirm_color_data visual_confirm_color_data; +}; + struct dmub_optc_state { uint32_t v_total_max; uint32_t v_total_min; - uint32_t v_total_mid; - uint32_t v_total_mid_frame_num; uint32_t tg_inst; - uint32_t enable_manual_trigger; - uint32_t clear_force_vsync; }; struct dmub_rb_cmd_drr_update { @@ -2338,6 +2949,26 @@ struct dmub_rb_cmd_drr_update { struct dmub_optc_state dmub_optc_state_req; }; +struct dmub_cmd_fw_assisted_mclk_switch_pipe_data { + uint32_t pix_clk_100hz; + uint8_t max_ramp_step; + uint8_t pipes; + uint8_t min_refresh_in_hz; + uint8_t padding[1]; +}; + +struct dmub_cmd_fw_assisted_mclk_switch_config { + uint8_t fams_enabled; + uint8_t visual_confirm_enabled; + uint8_t padding[2]; + struct dmub_cmd_fw_assisted_mclk_switch_pipe_data pipe_data[DMUB_MAX_STREAMS]; +}; + +struct dmub_rb_cmd_fw_assisted_mclk_switch { + struct dmub_cmd_header header; + struct dmub_cmd_fw_assisted_mclk_switch_config config_data; +}; + /** * enum dmub_cmd_panel_cntl_type - Panel control command. */ @@ -2363,6 +2994,9 @@ struct dmub_cmd_panel_cntl_data { uint32_t bl_pwm_ref_div1; /* in/out */ uint8_t is_backlight_on : 1; /* in/out */ uint8_t is_powered_on : 1; /* in/out */ + uint8_t padding[3]; + uint32_t bl_pwm_ref_div2; /* in/out */ + uint8_t reserved[4]; }; /** @@ -2398,6 +3032,24 @@ struct dmub_rb_cmd_lvtma_control { }; /** + * Data passed in/out in a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. + */ +struct dmub_rb_cmd_transmitter_query_dp_alt_data { + uint8_t phy_id; /**< 0=UNIPHYA, 1=UNIPHYB, 2=UNIPHYC, 3=UNIPHYD, 4=UNIPHYE, 5=UNIPHYF */ + uint8_t is_usb; /**< is phy is usb */ + uint8_t is_dp_alt_disable; /**< is dp alt disable */ + uint8_t is_dp4; /**< is dp in 4 lane */ +}; + +/** + * Definition of a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. + */ +struct dmub_rb_cmd_transmitter_query_dp_alt { + struct dmub_cmd_header header; /**< header */ + struct dmub_rb_cmd_transmitter_query_dp_alt_data data; /**< payload */ +}; + +/** * Maximum number of bytes a chunk sent to DMUB for parsing */ #define DMUB_EDID_CEA_DATA_CHUNK_BYTES 8 @@ -2408,7 +3060,7 @@ struct dmub_rb_cmd_lvtma_control { struct dmub_cmd_send_edid_cea { uint16_t offset; /**< offset into the CEA block */ uint8_t length; /**< number of bytes in payload to copy as part of CEA block */ - uint16_t total_length; /**< total length of the CEA block */ + uint16_t cea_total_length; /**< total length of the CEA block */ uint8_t payload[DMUB_EDID_CEA_DATA_CHUNK_BYTES]; /**< data chunk of the CEA block */ uint8_t pad[3]; /**< padding and for future expansion */ }; @@ -2460,10 +3112,41 @@ struct dmub_rb_cmd_edid_cea { }; /** + * struct dmub_cmd_cable_id_input - Defines the input of DMUB_CMD_GET_USBC_CABLE_ID command. + */ +struct dmub_cmd_cable_id_input { + uint8_t phy_inst; /**< phy inst for cable id data */ +}; + +/** + * struct dmub_cmd_cable_id_input - Defines the output of DMUB_CMD_GET_USBC_CABLE_ID command. + */ +struct dmub_cmd_cable_id_output { + uint8_t UHBR10_20_CAPABILITY :2; /**< b'01 for UHBR10 support, b'10 for both UHBR10 and UHBR20 support */ + uint8_t UHBR13_5_CAPABILITY :1; /**< b'1 for UHBR13.5 support */ + uint8_t CABLE_TYPE :3; /**< b'01 for passive cable, b'10 for active LRD cable, b'11 for active retimer cable */ + uint8_t RESERVED :2; /**< reserved means not defined */ +}; + +/** + * Definition of a DMUB_CMD_GET_USBC_CABLE_ID command + */ +struct dmub_rb_cmd_get_usbc_cable_id { + struct dmub_cmd_header header; /**< Command header */ + /** + * Data passed from driver to FW in a DMUB_CMD_GET_USBC_CABLE_ID command. + */ + union dmub_cmd_cable_id_data { + struct dmub_cmd_cable_id_input input; /**< Input */ + struct dmub_cmd_cable_id_output output; /**< Output */ + uint8_t output_raw; /**< Raw data output */ + } data; +}; + +/** * union dmub_rb_cmd - DMUB inbox command. */ union dmub_rb_cmd { - struct dmub_rb_cmd_lock_hw lock_hw; /** * Elements shared with all commands. */ @@ -2525,6 +3208,23 @@ union dmub_rb_cmd { */ struct dmub_rb_cmd_psr_force_static psr_force_static; /** + * Definition of a DMUB_CMD__UPDATE_DIRTY_RECT command. + */ + struct dmub_rb_cmd_update_dirty_rect update_dirty_rect; + /** + * Definition of a DMUB_CMD__UPDATE_CURSOR_INFO command. + */ + struct dmub_rb_cmd_update_cursor_info update_cursor_info; + /** + * Definition of a DMUB_CMD__HW_LOCK command. + * Command is used by driver and FW. + */ + struct dmub_rb_cmd_lock_hw lock_hw; + /** + * Definition of a DMUB_CMD__SET_SINK_VTOTAL_IN_PSR_ACTIVE command. + */ + struct dmub_rb_cmd_psr_set_vtotal psr_set_vtotal; + /** * Definition of a DMUB_CMD__SET_PSR_POWER_OPT command. */ struct dmub_rb_cmd_psr_set_power_opt psr_set_power_opt; @@ -2537,6 +3237,13 @@ union dmub_rb_cmd { */ struct dmub_rb_cmd_mall mall; /** + * Definition of a DMUB_CMD__CAB command. + */ + struct dmub_rb_cmd_cab_for_ss cab; + + struct dmub_rb_cmd_fw_assisted_mclk_switch_v2 fw_assisted_mclk_switch_v2; + + /** * Definition of a DMUB_CMD__IDLE_OPT_DCN_RESTORE command. */ struct dmub_rb_cmd_idle_opt_dcn_restore dcn_restore; @@ -2599,12 +3306,23 @@ union dmub_rb_cmd { * Definition of a DMUB_CMD__QUERY_FEATURE_CAPS command. */ struct dmub_rb_cmd_query_feature_caps query_feature_caps; + + /** + * Definition of a DMUB_CMD__GET_VISUAL_CONFIRM_COLOR command. + */ + struct dmub_rb_cmd_get_visual_confirm_color visual_confirm_color; struct dmub_rb_cmd_drr_update drr_update; + struct dmub_rb_cmd_fw_assisted_mclk_switch fw_assisted_mclk_switch; + /** * Definition of a DMUB_CMD__VBIOS_LVTMA_CONTROL command. */ struct dmub_rb_cmd_lvtma_control lvtma_control; /** + * Definition of a DMUB_CMD__VBIOS_TRANSMITTER_QUERY_DP_ALT command. + */ + struct dmub_rb_cmd_transmitter_query_dp_alt query_dp_alt; + /** * Definition of a DMUB_CMD__DPIA_DIG1_CONTROL command. */ struct dmub_rb_cmd_dig1_dpia_control dig1_dpia_control; @@ -2620,6 +3338,19 @@ union dmub_rb_cmd { * Definition of a DMUB_CMD__EDID_CEA command. */ struct dmub_rb_cmd_edid_cea edid_cea; + /** + * Definition of a DMUB_CMD_GET_USBC_CABLE_ID command. + */ + struct dmub_rb_cmd_get_usbc_cable_id cable_id; + + /** + * Definition of a DMUB_CMD__QUERY_HPD_STATE command. + */ + struct dmub_rb_cmd_query_hpd_state query_hpd; + /** + * Definition of a DMUB_CMD__DPIA_HPD_INT_ENABLE command. + */ + struct dmub_rb_cmd_dpia_hpd_int_enable dpia_hpd_int_enable; }; /** @@ -2722,7 +3453,7 @@ static inline bool dmub_rb_full(struct dmub_rb *rb) static inline bool dmub_rb_push_front(struct dmub_rb *rb, const union dmub_rb_cmd *cmd) { - uint64_t volatile *dst = (uint64_t volatile *)(rb->base_address) + rb->wrpt / sizeof(uint64_t); + uint64_t volatile *dst = (uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->wrpt); const uint64_t *src = (const uint64_t *)cmd; uint8_t i; @@ -2840,7 +3571,7 @@ static inline bool dmub_rb_peek_offset(struct dmub_rb *rb, static inline bool dmub_rb_out_front(struct dmub_rb *rb, union dmub_rb_out_cmd *cmd) { - const uint64_t volatile *src = (const uint64_t volatile *)(rb->base_address) + rb->rptr / sizeof(uint64_t); + const uint64_t volatile *src = (const uint64_t volatile *)((uint8_t *)(rb->base_address) + rb->rptr); uint64_t *dst = (uint64_t *)cmd; uint8_t i; @@ -2888,13 +3619,15 @@ static inline void dmub_rb_flush_pending(const struct dmub_rb *rb) uint32_t wptr = rb->wrpt; while (rptr != wptr) { - uint64_t volatile *data = (uint64_t volatile *)rb->base_address + rptr / sizeof(uint64_t); - //uint64_t volatile *p = (uint64_t volatile *)data; - uint64_t temp; + uint64_t *data = (uint64_t *)((uint8_t *)(rb->base_address) + rptr); uint8_t i; + /* Don't remove this. + * The contents need to actually be read from the ring buffer + * for this function to be effective. + */ for (i = 0; i < DMUB_RB_CMD_SIZE / sizeof(uint64_t); i++) - temp = *data++; + (void)READ_ONCE(*data++); rptr += DMUB_RB_CMD_SIZE; if (rptr >= rb->capacity) |