diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/analogix/anx7625.c')
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/anx7625.c | 36 |
1 files changed, 26 insertions, 10 deletions
diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 7519b7a0f29d..14d73fb1dd15 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -384,6 +384,25 @@ static int anx7625_odfc_config(struct anx7625_data *ctx, return ret; } +/* + * The MIPI source video data exist large variation (e.g. 59Hz ~ 61Hz), + * anx7625 defined K ratio for matching MIPI input video clock and + * DP output video clock. Increase K value can match bigger video data + * variation. IVO panel has small variation than DP CTS spec, need + * decrease the K value. + */ +static int anx7625_set_k_value(struct anx7625_data *ctx) +{ + struct edid *edid = (struct edid *)ctx->slimport_edid_p.edid_raw_data; + + if (edid->mfg_id[0] == IVO_MID0 && edid->mfg_id[1] == IVO_MID1) + return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, + MIPI_DIGITAL_ADJ_1, 0x3B); + + return anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, + MIPI_DIGITAL_ADJ_1, 0x3D); +} + static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx) { struct device *dev = &ctx->client->dev; @@ -470,9 +489,8 @@ static int anx7625_dsi_video_timing_config(struct anx7625_data *ctx) MIPI_PLL_N_NUM_15_8, (n >> 8) & 0xff); ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, MIPI_PLL_N_NUM_7_0, (n & 0xff)); - /* Diff */ - ret |= anx7625_reg_write(ctx, ctx->i2c.rx_p1_client, - MIPI_DIGITAL_ADJ_1, 0x3D); + + anx7625_set_k_value(ctx); ret |= anx7625_odfc_config(ctx, post_divider - 1); @@ -1307,7 +1325,7 @@ static int anx7625_attach_dsi(struct anx7625_data *ctx) dsi->format = MIPI_DSI_FMT_RGB888; dsi->mode_flags = MIPI_DSI_MODE_VIDEO | MIPI_DSI_MODE_VIDEO_SYNC_PULSE | - MIPI_DSI_MODE_EOT_PACKET | + MIPI_DSI_MODE_NO_EOT_PACKET | MIPI_DSI_MODE_VIDEO_HSE; if (mipi_dsi_attach(dsi) < 0) { @@ -1359,11 +1377,8 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge, err = drm_bridge_attach(bridge->encoder, ctx->pdata.panel_bridge, &ctx->bridge, flags); - if (err) { - DRM_DEV_ERROR(dev, - "Fail to attach panel bridge: %d\n", err); + if (err) return err; - } } ctx->bridge_attached = 1; @@ -1730,7 +1745,6 @@ static int __maybe_unused anx7625_suspend(struct device *dev) if (!pm_runtime_enabled(dev) || !pm_runtime_suspended(dev)) { anx7625_runtime_pm_suspend(dev); disable_irq(ctx->pdata.intp_irq); - flush_workqueue(ctx->workqueue); } return 0; @@ -1790,7 +1804,8 @@ static int anx7625_i2c_probe(struct i2c_client *client, platform->pdata.intp_irq = client->irq; if (platform->pdata.intp_irq) { INIT_WORK(&platform->work, anx7625_work_func); - platform->workqueue = create_workqueue("anx7625_work"); + platform->workqueue = alloc_workqueue("anx7625_work", + WQ_FREEZABLE | WQ_MEM_RECLAIM, 1); if (!platform->workqueue) { DRM_DEV_ERROR(dev, "fail to create work queue\n"); ret = -ENOMEM; @@ -1874,6 +1889,7 @@ static const struct of_device_id anx_match_table[] = { {.compatible = "analogix,anx7625",}, {}, }; +MODULE_DEVICE_TABLE(of, anx_match_table); static struct i2c_driver anx7625_driver = { .driver = { |