diff options
Diffstat (limited to 'drivers/gpu/drm/drm_crtc.c')
| -rw-r--r-- | drivers/gpu/drm/drm_crtc.c | 4727 |
1 files changed, 21 insertions, 4706 deletions
diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index ddebe54cd5ca..2d7bedf28647 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -40,39 +40,14 @@ #include <drm/drm_modeset_lock.h> #include <drm/drm_atomic.h> #include <drm/drm_auth.h> +#include <drm/drm_framebuffer.h> #include "drm_crtc_internal.h" #include "drm_internal.h" -static struct drm_framebuffer * -internal_framebuffer_create(struct drm_device *dev, - const struct drm_mode_fb_cmd2 *r, - struct drm_file *file_priv); - -/* Avoid boilerplate. I'm tired of typing. */ -#define DRM_ENUM_NAME_FN(fnname, list) \ - const char *fnname(int val) \ - { \ - int i; \ - for (i = 0; i < ARRAY_SIZE(list); i++) { \ - if (list[i].type == val) \ - return list[i].name; \ - } \ - return "(unknown)"; \ - } - /* * Global properties */ -static const struct drm_prop_enum_list drm_dpms_enum_list[] = { - { DRM_MODE_DPMS_ON, "On" }, - { DRM_MODE_DPMS_STANDBY, "Standby" }, - { DRM_MODE_DPMS_SUSPEND, "Suspend" }, - { DRM_MODE_DPMS_OFF, "Off" } -}; - -DRM_ENUM_NAME_FN(drm_get_dpms_name, drm_dpms_enum_list) - static const struct drm_prop_enum_list drm_plane_type_enum_list[] = { { DRM_PLANE_TYPE_OVERLAY, "Overlay" }, { DRM_PLANE_TYPE_PRIMARY, "Primary" }, @@ -82,320 +57,6 @@ static const struct drm_prop_enum_list drm_plane_type_enum_list[] = { /* * Optional properties */ -static const struct drm_prop_enum_list drm_scaling_mode_enum_list[] = { - { DRM_MODE_SCALE_NONE, "None" }, - { DRM_MODE_SCALE_FULLSCREEN, "Full" }, - { DRM_MODE_SCALE_CENTER, "Center" }, - { DRM_MODE_SCALE_ASPECT, "Full aspect" }, -}; - -static const struct drm_prop_enum_list drm_aspect_ratio_enum_list[] = { - { DRM_MODE_PICTURE_ASPECT_NONE, "Automatic" }, - { DRM_MODE_PICTURE_ASPECT_4_3, "4:3" }, - { DRM_MODE_PICTURE_ASPECT_16_9, "16:9" }, -}; - -/* - * Non-global properties, but "required" for certain connectors. - */ -static const struct drm_prop_enum_list drm_dvi_i_select_enum_list[] = { - { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */ - { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */ - { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */ -}; - -DRM_ENUM_NAME_FN(drm_get_dvi_i_select_name, drm_dvi_i_select_enum_list) - -static const struct drm_prop_enum_list drm_dvi_i_subconnector_enum_list[] = { - { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */ - { DRM_MODE_SUBCONNECTOR_DVID, "DVI-D" }, /* DVI-I */ - { DRM_MODE_SUBCONNECTOR_DVIA, "DVI-A" }, /* DVI-I */ -}; - -DRM_ENUM_NAME_FN(drm_get_dvi_i_subconnector_name, - drm_dvi_i_subconnector_enum_list) - -static const struct drm_prop_enum_list drm_tv_select_enum_list[] = { - { DRM_MODE_SUBCONNECTOR_Automatic, "Automatic" }, /* DVI-I and TV-out */ - { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */ - { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */ - { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */ - { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */ -}; - -DRM_ENUM_NAME_FN(drm_get_tv_select_name, drm_tv_select_enum_list) - -static const struct drm_prop_enum_list drm_tv_subconnector_enum_list[] = { - { DRM_MODE_SUBCONNECTOR_Unknown, "Unknown" }, /* DVI-I and TV-out */ - { DRM_MODE_SUBCONNECTOR_Composite, "Composite" }, /* TV-out */ - { DRM_MODE_SUBCONNECTOR_SVIDEO, "SVIDEO" }, /* TV-out */ - { DRM_MODE_SUBCONNECTOR_Component, "Component" }, /* TV-out */ - { DRM_MODE_SUBCONNECTOR_SCART, "SCART" }, /* TV-out */ -}; - -DRM_ENUM_NAME_FN(drm_get_tv_subconnector_name, - drm_tv_subconnector_enum_list) - -static const struct drm_prop_enum_list drm_dirty_info_enum_list[] = { - { DRM_MODE_DIRTY_OFF, "Off" }, - { DRM_MODE_DIRTY_ON, "On" }, - { DRM_MODE_DIRTY_ANNOTATE, "Annotate" }, -}; - -struct drm_conn_prop_enum_list { - int type; - const char *name; - struct ida ida; -}; - -/* - * Connector and encoder types. - */ -static struct drm_conn_prop_enum_list drm_connector_enum_list[] = { - { DRM_MODE_CONNECTOR_Unknown, "Unknown" }, - { DRM_MODE_CONNECTOR_VGA, "VGA" }, - { DRM_MODE_CONNECTOR_DVII, "DVI-I" }, - { DRM_MODE_CONNECTOR_DVID, "DVI-D" }, - { DRM_MODE_CONNECTOR_DVIA, "DVI-A" }, - { DRM_MODE_CONNECTOR_Composite, "Composite" }, - { DRM_MODE_CONNECTOR_SVIDEO, "SVIDEO" }, - { DRM_MODE_CONNECTOR_LVDS, "LVDS" }, - { DRM_MODE_CONNECTOR_Component, "Component" }, - { DRM_MODE_CONNECTOR_9PinDIN, "DIN" }, - { DRM_MODE_CONNECTOR_DisplayPort, "DP" }, - { DRM_MODE_CONNECTOR_HDMIA, "HDMI-A" }, - { DRM_MODE_CONNECTOR_HDMIB, "HDMI-B" }, - { DRM_MODE_CONNECTOR_TV, "TV" }, - { DRM_MODE_CONNECTOR_eDP, "eDP" }, - { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" }, - { DRM_MODE_CONNECTOR_DSI, "DSI" }, - { DRM_MODE_CONNECTOR_DPI, "DPI" }, -}; - -static const struct drm_prop_enum_list drm_encoder_enum_list[] = { - { DRM_MODE_ENCODER_NONE, "None" }, - { DRM_MODE_ENCODER_DAC, "DAC" }, - { DRM_MODE_ENCODER_TMDS, "TMDS" }, - { DRM_MODE_ENCODER_LVDS, "LVDS" }, - { DRM_MODE_ENCODER_TVDAC, "TV" }, - { DRM_MODE_ENCODER_VIRTUAL, "Virtual" }, - { DRM_MODE_ENCODER_DSI, "DSI" }, - { DRM_MODE_ENCODER_DPMST, "DP MST" }, - { DRM_MODE_ENCODER_DPI, "DPI" }, -}; - -static const struct drm_prop_enum_list drm_subpixel_enum_list[] = { - { SubPixelUnknown, "Unknown" }, - { SubPixelHorizontalRGB, "Horizontal RGB" }, - { SubPixelHorizontalBGR, "Horizontal BGR" }, - { SubPixelVerticalRGB, "Vertical RGB" }, - { SubPixelVerticalBGR, "Vertical BGR" }, - { SubPixelNone, "None" }, -}; - -void drm_connector_ida_init(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++) - ida_init(&drm_connector_enum_list[i].ida); -} - -void drm_connector_ida_destroy(void) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(drm_connector_enum_list); i++) - ida_destroy(&drm_connector_enum_list[i].ida); -} - -/** - * drm_get_connector_status_name - return a string for connector status - * @status: connector status to compute name of - * - * In contrast to the other drm_get_*_name functions this one here returns a - * const pointer and hence is threadsafe. - */ -const char *drm_get_connector_status_name(enum drm_connector_status status) -{ - if (status == connector_status_connected) - return "connected"; - else if (status == connector_status_disconnected) - return "disconnected"; - else - return "unknown"; -} -EXPORT_SYMBOL(drm_get_connector_status_name); - -/** - * drm_get_subpixel_order_name - return a string for a given subpixel enum - * @order: enum of subpixel_order - * - * Note you could abuse this and return something out of bounds, but that - * would be a caller error. No unscrubbed user data should make it here. - */ -const char *drm_get_subpixel_order_name(enum subpixel_order order) -{ - return drm_subpixel_enum_list[order].name; -} -EXPORT_SYMBOL(drm_get_subpixel_order_name); - -/* - * Internal function to assign a slot in the object idr and optionally - * register the object into the idr. - */ -static int drm_mode_object_get_reg(struct drm_device *dev, - struct drm_mode_object *obj, - uint32_t obj_type, - bool register_obj, - void (*obj_free_cb)(struct kref *kref)) -{ - int ret; - - mutex_lock(&dev->mode_config.idr_mutex); - ret = idr_alloc(&dev->mode_config.crtc_idr, register_obj ? obj : NULL, 1, 0, GFP_KERNEL); - if (ret >= 0) { - /* - * Set up the object linking under the protection of the idr - * lock so that other users can't see inconsistent state. - */ - obj->id = ret; - obj->type = obj_type; - if (obj_free_cb) { - obj->free_cb = obj_free_cb; - kref_init(&obj->refcount); - } - } - mutex_unlock(&dev->mode_config.idr_mutex); - - return ret < 0 ? ret : 0; -} - -/** - * drm_mode_object_get - allocate a new modeset identifier - * @dev: DRM device - * @obj: object pointer, used to generate unique ID - * @obj_type: object type - * - * Create a unique identifier based on @ptr in @dev's identifier space. Used - * for tracking modes, CRTCs and connectors. Note that despite the _get postfix - * modeset identifiers are _not_ reference counted. Hence don't use this for - * reference counted modeset objects like framebuffers. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_mode_object_get(struct drm_device *dev, - struct drm_mode_object *obj, uint32_t obj_type) -{ - return drm_mode_object_get_reg(dev, obj, obj_type, true, NULL); -} - -static void drm_mode_object_register(struct drm_device *dev, - struct drm_mode_object *obj) -{ - mutex_lock(&dev->mode_config.idr_mutex); - idr_replace(&dev->mode_config.crtc_idr, obj, obj->id); - mutex_unlock(&dev->mode_config.idr_mutex); -} - -/** - * drm_mode_object_unregister - free a modeset identifer - * @dev: DRM device - * @object: object to free - * - * Free @id from @dev's unique identifier pool. - * This function can be called multiple times, and guards against - * multiple removals. - * These modeset identifiers are _not_ reference counted. Hence don't use this - * for reference counted modeset objects like framebuffers. - */ -void drm_mode_object_unregister(struct drm_device *dev, - struct drm_mode_object *object) -{ - mutex_lock(&dev->mode_config.idr_mutex); - if (object->id) { - idr_remove(&dev->mode_config.crtc_idr, object->id); - object->id = 0; - } - mutex_unlock(&dev->mode_config.idr_mutex); -} - -static struct drm_mode_object *_object_find(struct drm_device *dev, - uint32_t id, uint32_t type) -{ - struct drm_mode_object *obj = NULL; - - mutex_lock(&dev->mode_config.idr_mutex); - obj = idr_find(&dev->mode_config.crtc_idr, id); - if (obj && type != DRM_MODE_OBJECT_ANY && obj->type != type) - obj = NULL; - if (obj && obj->id != id) - obj = NULL; - - if (obj && obj->free_cb) { - if (!kref_get_unless_zero(&obj->refcount)) - obj = NULL; - } - mutex_unlock(&dev->mode_config.idr_mutex); - - return obj; -} - -/** - * drm_mode_object_find - look up a drm object with static lifetime - * @dev: drm device - * @id: id of the mode object - * @type: type of the mode object - * - * This function is used to look up a modeset object. It will acquire a - * reference for reference counted objects. This reference must be dropped again - * by callind drm_mode_object_unreference(). - */ -struct drm_mode_object *drm_mode_object_find(struct drm_device *dev, - uint32_t id, uint32_t type) -{ - struct drm_mode_object *obj = NULL; - - obj = _object_find(dev, id, type); - return obj; -} -EXPORT_SYMBOL(drm_mode_object_find); - -/** - * drm_mode_object_unreference - decr the object refcnt - * @obj: mode_object - * - * This functions decrements the object's refcount if it is a refcounted modeset - * object. It is a no-op on any other object. This is used to drop references - * acquired with drm_mode_object_reference(). - */ -void drm_mode_object_unreference(struct drm_mode_object *obj) -{ - if (obj->free_cb) { - DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount)); - kref_put(&obj->refcount, obj->free_cb); - } -} -EXPORT_SYMBOL(drm_mode_object_unreference); - -/** - * drm_mode_object_reference - incr the object refcnt - * @obj: mode_object - * - * This functions increments the object's refcount if it is a refcounted modeset - * object. It is a no-op on any other object. References should be dropped again - * by calling drm_mode_object_unreference(). - */ -void drm_mode_object_reference(struct drm_mode_object *obj) -{ - if (obj->free_cb) { - DRM_DEBUG("OBJ ID: %d (%d)\n", obj->id, atomic_read(&obj->refcount.refcount)); - kref_get(&obj->refcount); - } -} -EXPORT_SYMBOL(drm_mode_object_reference); - /** * drm_crtc_force_disable - Forcibly turn off a CRTC * @crtc: CRTC to turn off @@ -441,199 +102,6 @@ out: } EXPORT_SYMBOL(drm_crtc_force_disable_all); -static void drm_framebuffer_free(struct kref *kref) -{ - struct drm_framebuffer *fb = - container_of(kref, struct drm_framebuffer, base.refcount); - struct drm_device *dev = fb->dev; - - /* - * The lookup idr holds a weak reference, which has not necessarily been - * removed at this point. Check for that. - */ - drm_mode_object_unregister(dev, &fb->base); - - fb->funcs->destroy(fb); -} - -/** - * drm_framebuffer_init - initialize a framebuffer - * @dev: DRM device - * @fb: framebuffer to be initialized - * @funcs: ... with these functions - * - * Allocates an ID for the framebuffer's parent mode object, sets its mode - * functions & device file and adds it to the master fd list. - * - * IMPORTANT: - * This functions publishes the fb and makes it available for concurrent access - * by other users. Which means by this point the fb _must_ be fully set up - - * since all the fb attributes are invariant over its lifetime, no further - * locking but only correct reference counting is required. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_framebuffer_init(struct drm_device *dev, struct drm_framebuffer *fb, - const struct drm_framebuffer_funcs *funcs) -{ - int ret; - - INIT_LIST_HEAD(&fb->filp_head); - fb->dev = dev; - fb->funcs = funcs; - - ret = drm_mode_object_get_reg(dev, &fb->base, DRM_MODE_OBJECT_FB, - false, drm_framebuffer_free); - if (ret) - goto out; - - mutex_lock(&dev->mode_config.fb_lock); - dev->mode_config.num_fb++; - list_add(&fb->head, &dev->mode_config.fb_list); - mutex_unlock(&dev->mode_config.fb_lock); - - drm_mode_object_register(dev, &fb->base); -out: - return ret; -} -EXPORT_SYMBOL(drm_framebuffer_init); - -/** - * drm_framebuffer_lookup - look up a drm framebuffer and grab a reference - * @dev: drm device - * @id: id of the fb object - * - * If successful, this grabs an additional reference to the framebuffer - - * callers need to make sure to eventually unreference the returned framebuffer - * again, using @drm_framebuffer_unreference. - */ -struct drm_framebuffer *drm_framebuffer_lookup(struct drm_device *dev, - uint32_t id) -{ - struct drm_mode_object *obj; - struct drm_framebuffer *fb = NULL; - - obj = _object_find(dev, id, DRM_MODE_OBJECT_FB); - if (obj) - fb = obj_to_fb(obj); - return fb; -} -EXPORT_SYMBOL(drm_framebuffer_lookup); - -/** - * drm_framebuffer_unregister_private - unregister a private fb from the lookup idr - * @fb: fb to unregister - * - * Drivers need to call this when cleaning up driver-private framebuffers, e.g. - * those used for fbdev. Note that the caller must hold a reference of it's own, - * i.e. the object may not be destroyed through this call (since it'll lead to a - * locking inversion). - */ -void drm_framebuffer_unregister_private(struct drm_framebuffer *fb) -{ - struct drm_device *dev; - - if (!fb) - return; - - dev = fb->dev; - - /* Mark fb as reaped and drop idr ref. */ - drm_mode_object_unregister(dev, &fb->base); -} -EXPORT_SYMBOL(drm_framebuffer_unregister_private); - -/** - * drm_framebuffer_cleanup - remove a framebuffer object - * @fb: framebuffer to remove - * - * Cleanup framebuffer. This function is intended to be used from the drivers - * ->destroy callback. It can also be used to clean up driver private - * framebuffers embedded into a larger structure. - * - * Note that this function does not remove the fb from active usuage - if it is - * still used anywhere, hilarity can ensue since userspace could call getfb on - * the id and get back -EINVAL. Obviously no concern at driver unload time. - * - * Also, the framebuffer will not be removed from the lookup idr - for - * user-created framebuffers this will happen in in the rmfb ioctl. For - * driver-private objects (e.g. for fbdev) drivers need to explicitly call - * drm_framebuffer_unregister_private. - */ -void drm_framebuffer_cleanup(struct drm_framebuffer *fb) -{ - struct drm_device *dev = fb->dev; - - mutex_lock(&dev->mode_config.fb_lock); - list_del(&fb->head); - dev->mode_config.num_fb--; - mutex_unlock(&dev->mode_config.fb_lock); -} -EXPORT_SYMBOL(drm_framebuffer_cleanup); - -/** - * drm_framebuffer_remove - remove and unreference a framebuffer object - * @fb: framebuffer to remove - * - * Scans all the CRTCs and planes in @dev's mode_config. If they're - * using @fb, removes it, setting it to NULL. Then drops the reference to the - * passed-in framebuffer. Might take the modeset locks. - * - * Note that this function optimizes the cleanup away if the caller holds the - * last reference to the framebuffer. It is also guaranteed to not take the - * modeset locks in this case. - */ -void drm_framebuffer_remove(struct drm_framebuffer *fb) -{ - struct drm_device *dev; - struct drm_crtc *crtc; - struct drm_plane *plane; - - if (!fb) - return; - - dev = fb->dev; - - WARN_ON(!list_empty(&fb->filp_head)); - - /* - * drm ABI mandates that we remove any deleted framebuffers from active - * useage. But since most sane clients only remove framebuffers they no - * longer need, try to optimize this away. - * - * Since we're holding a reference ourselves, observing a refcount of 1 - * means that we're the last holder and can skip it. Also, the refcount - * can never increase from 1 again, so we don't need any barriers or - * locks. - * - * Note that userspace could try to race with use and instate a new - * usage _after_ we've cleared all current ones. End result will be an - * in-use fb with fb-id == 0. Userspace is allowed to shoot its own foot - * in this manner. - */ - if (drm_framebuffer_read_refcount(fb) > 1) { - drm_modeset_lock_all(dev); - /* remove from any CRTC */ - drm_for_each_crtc(crtc, dev) { - if (crtc->primary->fb == fb) { - /* should turn off the crtc */ - if (drm_crtc_force_disable(crtc)) - DRM_ERROR("failed to reset crtc %p when fb was deleted\n", crtc); - } - } - - drm_for_each_plane(plane, dev) { - if (plane->fb == fb) - drm_plane_force_disable(plane); - } - drm_modeset_unlock_all(dev); - } - - drm_framebuffer_unreference(fb); -} -EXPORT_SYMBOL(drm_framebuffer_remove); - DEFINE_WW_CLASS(crtc_ww_class); static unsigned int drm_num_crtcs(struct drm_device *dev) @@ -683,7 +151,11 @@ static void drm_crtc_unregister_all(struct drm_device *dev) * @funcs: callbacks for the new CRTC * @name: printf style format string for the CRTC name, or NULL for default name * - * Inits a new object created as base part of a driver crtc object. + * Inits a new object created as base part of a driver crtc object. Drivers + * should use this function instead of drm_crtc_init(), which is only provided + * for backwards compatibility with drivers which do not yet support universal + * planes). For really simple hardware which has only 1 plane look at + * drm_simple_display_pipe_init() instead. * * Returns: * Zero on success, error code on failure. @@ -783,720 +255,6 @@ void drm_crtc_cleanup(struct drm_crtc *crtc) } EXPORT_SYMBOL(drm_crtc_cleanup); -/* - * drm_mode_remove - remove and free a mode - * @connector: connector list to modify - * @mode: mode to remove - * - * Remove @mode from @connector's mode list, then free it. - */ -static void drm_mode_remove(struct drm_connector *connector, - struct drm_display_mode *mode) -{ - list_del(&mode->head); - drm_mode_destroy(connector->dev, mode); -} - -/** - * drm_display_info_set_bus_formats - set the supported bus formats - * @info: display info to store bus formats in - * @formats: array containing the supported bus formats - * @num_formats: the number of entries in the fmts array - * - * Store the supported bus formats in display info structure. - * See MEDIA_BUS_FMT_* definitions in include/uapi/linux/media-bus-format.h for - * a full list of available formats. - */ -int drm_display_info_set_bus_formats(struct drm_display_info *info, - const u32 *formats, - unsigned int num_formats) -{ - u32 *fmts = NULL; - - if (!formats && num_formats) - return -EINVAL; - - if (formats && num_formats) { - fmts = kmemdup(formats, sizeof(*formats) * num_formats, - GFP_KERNEL); - if (!fmts) - return -ENOMEM; - } - - kfree(info->bus_formats); - info->bus_formats = fmts; - info->num_bus_formats = num_formats; - - return 0; -} -EXPORT_SYMBOL(drm_display_info_set_bus_formats); - -/** - * drm_connector_get_cmdline_mode - reads the user's cmdline mode - * @connector: connector to quwery - * - * The kernel supports per-connector configration of its consoles through - * use of the video= parameter. This function parses that option and - * extracts the user's specified mode (or enable/disable status) for a - * particular connector. This is typically only used during the early fbdev - * setup. - */ -static void drm_connector_get_cmdline_mode(struct drm_connector *connector) -{ - struct drm_cmdline_mode *mode = &connector->cmdline_mode; - char *option = NULL; - - if (fb_get_options(connector->name, &option)) - return; - - if (!drm_mode_parse_command_line_for_connector(option, - connector, - mode)) - return; - - if (mode->force) { - const char *s; - - switch (mode->force) { - case DRM_FORCE_OFF: - s = "OFF"; - break; - case DRM_FORCE_ON_DIGITAL: - s = "ON - dig"; - break; - default: - case DRM_FORCE_ON: - s = "ON"; - break; - } - - DRM_INFO("forcing %s connector %s\n", connector->name, s); - connector->force = mode->force; - } - - DRM_DEBUG_KMS("cmdline mode for connector %s %dx%d@%dHz%s%s%s\n", - connector->name, - mode->xres, mode->yres, - mode->refresh_specified ? mode->refresh : 60, - mode->rb ? " reduced blanking" : "", - mode->margins ? " with margins" : "", - mode->interlace ? " interlaced" : ""); -} - -static void drm_connector_free(struct kref *kref) -{ - struct drm_connector *connector = - container_of(kref, struct drm_connector, base.refcount); - struct drm_device *dev = connector->dev; - - drm_mode_object_unregister(dev, &connector->base); - connector->funcs->destroy(connector); -} - -/** - * drm_connector_init - Init a preallocated connector - * @dev: DRM device - * @connector: the connector to init - * @funcs: callbacks for this connector - * @connector_type: user visible type of the connector - * - * Initialises a preallocated connector. Connectors should be - * subclassed as part of driver connector objects. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_connector_init(struct drm_device *dev, - struct drm_connector *connector, - const struct drm_connector_funcs *funcs, - int connector_type) -{ - struct drm_mode_config *config = &dev->mode_config; - int ret; - struct ida *connector_ida = - &drm_connector_enum_list[connector_type].ida; - - drm_modeset_lock_all(dev); - - ret = drm_mode_object_get_reg(dev, &connector->base, - DRM_MODE_OBJECT_CONNECTOR, - false, drm_connector_free); - if (ret) - goto out_unlock; - - connector->base.properties = &connector->properties; - connector->dev = dev; - connector->funcs = funcs; - - ret = ida_simple_get(&config->connector_ida, 0, 0, GFP_KERNEL); - if (ret < 0) - goto out_put; - connector->index = ret; - ret = 0; - - connector->connector_type = connector_type; - connector->connector_type_id = - ida_simple_get(connector_ida, 1, 0, GFP_KERNEL); - if (connector->connector_type_id < 0) { - ret = connector->connector_type_id; - goto out_put_id; - } - connector->name = - kasprintf(GFP_KERNEL, "%s-%d", - drm_connector_enum_list[connector_type].name, - connector->connector_type_id); - if (!connector->name) { - ret = -ENOMEM; - goto out_put_type_id; - } - - INIT_LIST_HEAD(&connector->probed_modes); - INIT_LIST_HEAD(&connector->modes); - connector->edid_blob_ptr = NULL; - connector->status = connector_status_unknown; - - drm_connector_get_cmdline_mode(connector); - - /* We should add connectors at the end to avoid upsetting the connector - * index too much. */ - list_add_tail(&connector->head, &config->connector_list); - config->num_connector++; - - if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL) - drm_object_attach_property(&connector->base, - config->edid_property, - 0); - - drm_object_attach_property(&connector->base, - config->dpms_property, 0); - - if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { - drm_object_attach_property(&connector->base, config->prop_crtc_id, 0); - } - - connector->debugfs_entry = NULL; -out_put_type_id: - if (ret) - ida_remove(connector_ida, connector->connector_type_id); -out_put_id: - if (ret) - ida_remove(&config->connector_ida, connector->index); -out_put: - if (ret) - drm_mode_object_unregister(dev, &connector->base); - -out_unlock: - drm_modeset_unlock_all(dev); - - return ret; -} -EXPORT_SYMBOL(drm_connector_init); - -/** - * drm_connector_cleanup - cleans up an initialised connector - * @connector: connector to cleanup - * - * Cleans up the connector but doesn't free the object. - */ -void drm_connector_cleanup(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - struct drm_display_mode *mode, *t; - - /* The connector should have been removed from userspace long before - * it is finally destroyed. - */ - if (WARN_ON(connector->registered)) - drm_connector_unregister(connector); - - if (connector->tile_group) { - drm_mode_put_tile_group(dev, connector->tile_group); - connector->tile_group = NULL; - } - - list_for_each_entry_safe(mode, t, &connector->probed_modes, head) - drm_mode_remove(connector, mode); - - list_for_each_entry_safe(mode, t, &connector->modes, head) - drm_mode_remove(connector, mode); - - ida_remove(&drm_connector_enum_list[connector->connector_type].ida, - connector->connector_type_id); - - ida_remove(&dev->mode_config.connector_ida, - connector->index); - - kfree(connector->display_info.bus_formats); - drm_mode_object_unregister(dev, &connector->base); - kfree(connector->name); - connector->name = NULL; - list_del(&connector->head); - dev->mode_config.num_connector--; - - WARN_ON(connector->state && !connector->funcs->atomic_destroy_state); - if (connector->state && connector->funcs->atomic_destroy_state) - connector->funcs->atomic_destroy_state(connector, - connector->state); - - memset(connector, 0, sizeof(*connector)); -} -EXPORT_SYMBOL(drm_connector_cleanup); - -/** - * drm_connector_register - register a connector - * @connector: the connector to register - * - * Register userspace interfaces for a connector - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_connector_register(struct drm_connector *connector) -{ - int ret; - - if (connector->registered) - return 0; - - ret = drm_sysfs_connector_add(connector); - if (ret) - return ret; - - ret = drm_debugfs_connector_add(connector); - if (ret) { - goto err_sysfs; - } - - if (connector->funcs->late_register) { - ret = connector->funcs->late_register(connector); - if (ret) - goto err_debugfs; - } - - drm_mode_object_register(connector->dev, &connector->base); - - connector->registered = true; - return 0; - -err_debugfs: - drm_debugfs_connector_remove(connector); -err_sysfs: - drm_sysfs_connector_remove(connector); - return ret; -} -EXPORT_SYMBOL(drm_connector_register); - -/** - * drm_connector_unregister - unregister a connector - * @connector: the connector to unregister - * - * Unregister userspace interfaces for a connector - */ -void drm_connector_unregister(struct drm_connector *connector) -{ - if (!connector->registered) - return; - - if (connector->funcs->early_unregister) - connector->funcs->early_unregister(connector); - - drm_sysfs_connector_remove(connector); - drm_debugfs_connector_remove(connector); - - connector->registered = false; -} -EXPORT_SYMBOL(drm_connector_unregister); - -static void drm_connector_unregister_all(struct drm_device *dev) -{ - struct drm_connector *connector; - - /* FIXME: taking the mode config mutex ends up in a clash with sysfs */ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) - drm_connector_unregister(connector); -} - -static int drm_connector_register_all(struct drm_device *dev) -{ - struct drm_connector *connector; - int ret; - - /* FIXME: taking the mode config mutex ends up in a clash with - * fbcon/backlight registration */ - list_for_each_entry(connector, &dev->mode_config.connector_list, head) { - ret = drm_connector_register(connector); - if (ret) - goto err; - } - - return 0; - -err: - mutex_unlock(&dev->mode_config.mutex); - drm_connector_unregister_all(dev); - return ret; -} - -static int drm_encoder_register_all(struct drm_device *dev) -{ - struct drm_encoder *encoder; - int ret = 0; - - drm_for_each_encoder(encoder, dev) { - if (encoder->funcs->late_register) - ret = encoder->funcs->late_register(encoder); - if (ret) - return ret; - } - - return 0; -} - -static void drm_encoder_unregister_all(struct drm_device *dev) -{ - struct drm_encoder *encoder; - - drm_for_each_encoder(encoder, dev) { - if (encoder->funcs->early_unregister) - encoder->funcs->early_unregister(encoder); - } -} - -/** - * drm_encoder_init - Init a preallocated encoder - * @dev: drm device - * @encoder: the encoder to init - * @funcs: callbacks for this encoder - * @encoder_type: user visible type of the encoder - * @name: printf style format string for the encoder name, or NULL for default name - * - * Initialises a preallocated encoder. Encoder should be - * subclassed as part of driver encoder objects. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_encoder_init(struct drm_device *dev, - struct drm_encoder *encoder, - const struct drm_encoder_funcs *funcs, - int encoder_type, const char *name, ...) -{ - int ret; - - drm_modeset_lock_all(dev); - - ret = drm_mode_object_get(dev, &encoder->base, DRM_MODE_OBJECT_ENCODER); - if (ret) - goto out_unlock; - - encoder->dev = dev; - encoder->encoder_type = encoder_type; - encoder->funcs = funcs; - if (name) { - va_list ap; - - va_start(ap, name); - encoder->name = kvasprintf(GFP_KERNEL, name, ap); - va_end(ap); - } else { - encoder->name = kasprintf(GFP_KERNEL, "%s-%d", - drm_encoder_enum_list[encoder_type].name, - encoder->base.id); - } - if (!encoder->name) { - ret = -ENOMEM; - goto out_put; - } - - list_add_tail(&encoder->head, &dev->mode_config.encoder_list); - encoder->index = dev->mode_config.num_encoder++; - -out_put: - if (ret) - drm_mode_object_unregister(dev, &encoder->base); - -out_unlock: - drm_modeset_unlock_all(dev); - - return ret; -} -EXPORT_SYMBOL(drm_encoder_init); - -/** - * drm_encoder_cleanup - cleans up an initialised encoder - * @encoder: encoder to cleanup - * - * Cleans up the encoder but doesn't free the object. - */ -void drm_encoder_cleanup(struct drm_encoder *encoder) -{ - struct drm_device *dev = encoder->dev; - - /* Note that the encoder_list is considered to be static; should we - * remove the drm_encoder at runtime we would have to decrement all - * the indices on the drm_encoder after us in the encoder_list. - */ - - drm_modeset_lock_all(dev); - drm_mode_object_unregister(dev, &encoder->base); - kfree(encoder->name); - list_del(&encoder->head); - dev->mode_config.num_encoder--; - drm_modeset_unlock_all(dev); - - memset(encoder, 0, sizeof(*encoder)); -} -EXPORT_SYMBOL(drm_encoder_cleanup); - -static unsigned int drm_num_planes(struct drm_device *dev) -{ - unsigned int num = 0; - struct drm_plane *tmp; - - drm_for_each_plane(tmp, dev) { - num++; - } - - return num; -} - -/** - * drm_universal_plane_init - Initialize a new universal plane object - * @dev: DRM device - * @plane: plane object to init - * @possible_crtcs: bitmask of possible CRTCs - * @funcs: callbacks for the new plane - * @formats: array of supported formats (%DRM_FORMAT_*) - * @format_count: number of elements in @formats - * @type: type of plane (overlay, primary, cursor) - * @name: printf style format string for the plane name, or NULL for default name - * - * Initializes a plane object of type @type. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_universal_plane_init(struct drm_device *dev, struct drm_plane *plane, - unsigned long possible_crtcs, - const struct drm_plane_funcs *funcs, - const uint32_t *formats, unsigned int format_count, - enum drm_plane_type type, - const char *name, ...) -{ - struct drm_mode_config *config = &dev->mode_config; - int ret; - - ret = drm_mode_object_get(dev, &plane->base, DRM_MODE_OBJECT_PLANE); - if (ret) - return ret; - - drm_modeset_lock_init(&plane->mutex); - - plane->base.properties = &plane->properties; - plane->dev = dev; - plane->funcs = funcs; - plane->format_types = kmalloc_array(format_count, sizeof(uint32_t), - GFP_KERNEL); - if (!plane->format_types) { - DRM_DEBUG_KMS("out of memory when allocating plane\n"); - drm_mode_object_unregister(dev, &plane->base); - return -ENOMEM; - } - - if (name) { - va_list ap; - - va_start(ap, name); - plane->name = kvasprintf(GFP_KERNEL, name, ap); - va_end(ap); - } else { - plane->name = kasprintf(GFP_KERNEL, "plane-%d", - drm_num_planes(dev)); - } - if (!plane->name) { - kfree(plane->format_types); - drm_mode_object_unregister(dev, &plane->base); - return -ENOMEM; - } - - memcpy(plane->format_types, formats, format_count * sizeof(uint32_t)); - plane->format_count = format_count; - plane->possible_crtcs = possible_crtcs; - plane->type = type; - - list_add_tail(&plane->head, &config->plane_list); - plane->index = config->num_total_plane++; - if (plane->type == DRM_PLANE_TYPE_OVERLAY) - config->num_overlay_plane++; - - drm_object_attach_property(&plane->base, - config->plane_type_property, - plane->type); - - if (drm_core_check_feature(dev, DRIVER_ATOMIC)) { - drm_object_attach_property(&plane->base, config->prop_fb_id, 0); - drm_object_attach_property(&plane->base, config->prop_crtc_id, 0); - drm_object_attach_property(&plane->base, config->prop_crtc_x, 0); - drm_object_attach_property(&plane->base, config->prop_crtc_y, 0); - drm_object_attach_property(&plane->base, config->prop_crtc_w, 0); - drm_object_attach_property(&plane->base, config->prop_crtc_h, 0); - drm_object_attach_property(&plane->base, config->prop_src_x, 0); - drm_object_attach_property(&plane->base, config->prop_src_y, 0); - drm_object_attach_property(&plane->base, config->prop_src_w, 0); - drm_object_attach_property(&plane->base, config->prop_src_h, 0); - } - - return 0; -} -EXPORT_SYMBOL(drm_universal_plane_init); - -static int drm_plane_register_all(struct drm_device *dev) -{ - struct drm_plane *plane; - int ret = 0; - - drm_for_each_plane(plane, dev) { - if (plane->funcs->late_register) - ret = plane->funcs->late_register(plane); - if (ret) - return ret; - } - - return 0; -} - -static void drm_plane_unregister_all(struct drm_device *dev) -{ - struct drm_plane *plane; - - drm_for_each_plane(plane, dev) { - if (plane->funcs->early_unregister) - plane->funcs->early_unregister(plane); - } -} - -/** - * drm_plane_init - Initialize a legacy plane - * @dev: DRM device - * @plane: plane object to init - * @possible_crtcs: bitmask of possible CRTCs - * @funcs: callbacks for the new plane - * @formats: array of supported formats (%DRM_FORMAT_*) - * @format_count: number of elements in @formats - * @is_primary: plane type (primary vs overlay) - * - * Legacy API to initialize a DRM plane. - * - * New drivers should call drm_universal_plane_init() instead. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_plane_init(struct drm_device *dev, struct drm_plane *plane, - unsigned long possible_crtcs, - const struct drm_plane_funcs *funcs, - const uint32_t *formats, unsigned int format_count, - bool is_primary) -{ - enum drm_plane_type type; - - type = is_primary ? DRM_PLANE_TYPE_PRIMARY : DRM_PLANE_TYPE_OVERLAY; - return drm_universal_plane_init(dev, plane, possible_crtcs, funcs, - formats, format_count, type, NULL); -} -EXPORT_SYMBOL(drm_plane_init); - -/** - * drm_plane_cleanup - Clean up the core plane usage - * @plane: plane to cleanup - * - * This function cleans up @plane and removes it from the DRM mode setting - * core. Note that the function does *not* free the plane structure itself, - * this is the responsibility of the caller. - */ -void drm_plane_cleanup(struct drm_plane *plane) -{ - struct drm_device *dev = plane->dev; - - drm_modeset_lock_all(dev); - kfree(plane->format_types); - drm_mode_object_unregister(dev, &plane->base); - - BUG_ON(list_empty(&plane->head)); - - /* Note that the plane_list is considered to be static; should we - * remove the drm_plane at runtime we would have to decrement all - * the indices on the drm_plane after us in the plane_list. - */ - - list_del(&plane->head); - dev->mode_config.num_total_plane--; - if (plane->type == DRM_PLANE_TYPE_OVERLAY) - dev->mode_config.num_overlay_plane--; - drm_modeset_unlock_all(dev); - - WARN_ON(plane->state && !plane->funcs->atomic_destroy_state); - if (plane->state && plane->funcs->atomic_destroy_state) - plane->funcs->atomic_destroy_state(plane, plane->state); - - kfree(plane->name); - - memset(plane, 0, sizeof(*plane)); -} -EXPORT_SYMBOL(drm_plane_cleanup); - -/** - * drm_plane_from_index - find the registered plane at an index - * @dev: DRM device - * @idx: index of registered plane to find for - * - * Given a plane index, return the registered plane from DRM device's - * list of planes with matching index. - */ -struct drm_plane * -drm_plane_from_index(struct drm_device *dev, int idx) -{ - struct drm_plane *plane; - - drm_for_each_plane(plane, dev) - if (idx == plane->index) - return plane; - - return NULL; -} -EXPORT_SYMBOL(drm_plane_from_index); - -/** - * drm_plane_force_disable - Forcibly disable a plane - * @plane: plane to disable - * - * Forces the plane to be disabled. - * - * Used when the plane's current framebuffer is destroyed, - * and when restoring fbdev mode. - */ -void drm_plane_force_disable(struct drm_plane *plane) -{ - int ret; - - if (!plane->fb) - return; - - plane->old_fb = plane->fb; - ret = plane->funcs->disable_plane(plane); - if (ret) { - DRM_ERROR("failed to disable plane with busy fb\n"); - plane->old_fb = NULL; - return; - } - /* disconnect the plane from the fb and crtc: */ - drm_framebuffer_unreference(plane->old_fb); - plane->old_fb = NULL; - plane->fb = NULL; - plane->crtc = NULL; -} -EXPORT_SYMBOL(drm_plane_force_disable); - int drm_modeset_register_all(struct drm_device *dev) { int ret; @@ -1540,39 +298,11 @@ void drm_modeset_unregister_all(struct drm_device *dev) static int drm_mode_create_standard_properties(struct drm_device *dev) { struct drm_property *prop; + int ret; - /* - * Standard properties (apply to all connectors) - */ - prop = drm_property_create(dev, DRM_MODE_PROP_BLOB | - DRM_MODE_PROP_IMMUTABLE, - "EDID", 0); - if (!prop) - return -ENOMEM; - dev->mode_config.edid_property = prop; - - prop = drm_property_create_enum(dev, 0, - "DPMS", drm_dpms_enum_list, - ARRAY_SIZE(drm_dpms_enum_list)); - if (!prop) - return -ENOMEM; - dev->mode_config.dpms_property = prop; - - prop = drm_property_create(dev, - DRM_MODE_PROP_BLOB | - DRM_MODE_PROP_IMMUTABLE, - "PATH", 0); - if (!prop) - return -ENOMEM; - dev->mode_config.path_property = prop; - - prop = drm_property_create(dev, - DRM_MODE_PROP_BLOB | - DRM_MODE_PROP_IMMUTABLE, - "TILE", 0); - if (!prop) - return -ENOMEM; - dev->mode_config.tile_property = prop; + ret = drm_connector_create_standard_properties(dev); + if (ret) + return ret; prop = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, "type", drm_plane_type_enum_list, @@ -1693,250 +423,6 @@ static int drm_mode_create_standard_properties(struct drm_device *dev) } /** - * drm_mode_create_dvi_i_properties - create DVI-I specific connector properties - * @dev: DRM device - * - * Called by a driver the first time a DVI-I connector is made. - */ -int drm_mode_create_dvi_i_properties(struct drm_device *dev) -{ - struct drm_property *dvi_i_selector; - struct drm_property *dvi_i_subconnector; - - if (dev->mode_config.dvi_i_select_subconnector_property) - return 0; - - dvi_i_selector = - drm_property_create_enum(dev, 0, - "select subconnector", - drm_dvi_i_select_enum_list, - ARRAY_SIZE(drm_dvi_i_select_enum_list)); - dev->mode_config.dvi_i_select_subconnector_property = dvi_i_selector; - - dvi_i_subconnector = drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, - "subconnector", - drm_dvi_i_subconnector_enum_list, - ARRAY_SIZE(drm_dvi_i_subconnector_enum_list)); - dev->mode_config.dvi_i_subconnector_property = dvi_i_subconnector; - - return 0; -} -EXPORT_SYMBOL(drm_mode_create_dvi_i_properties); - -/** - * drm_create_tv_properties - create TV specific connector properties - * @dev: DRM device - * @num_modes: number of different TV formats (modes) supported - * @modes: array of pointers to strings containing name of each format - * - * Called by a driver's TV initialization routine, this function creates - * the TV specific connector properties for a given device. Caller is - * responsible for allocating a list of format names and passing them to - * this routine. - */ -int drm_mode_create_tv_properties(struct drm_device *dev, - unsigned int num_modes, - const char * const modes[]) -{ - struct drm_property *tv_selector; - struct drm_property *tv_subconnector; - unsigned int i; - - if (dev->mode_config.tv_select_subconnector_property) - return 0; - - /* - * Basic connector properties - */ - tv_selector = drm_property_create_enum(dev, 0, - "select subconnector", - drm_tv_select_enum_list, - ARRAY_SIZE(drm_tv_select_enum_list)); - if (!tv_selector) - goto nomem; - - dev->mode_config.tv_select_subconnector_property = tv_selector; - - tv_subconnector = - drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, - "subconnector", - drm_tv_subconnector_enum_list, - ARRAY_SIZE(drm_tv_subconnector_enum_list)); - if (!tv_subconnector) - goto nomem; - dev->mode_config.tv_subconnector_property = tv_subconnector; - - /* - * Other, TV specific properties: margins & TV modes. - */ - dev->mode_config.tv_left_margin_property = - drm_property_create_range(dev, 0, "left margin", 0, 100); - if (!dev->mode_config.tv_left_margin_property) - goto nomem; - - dev->mode_config.tv_right_margin_property = - drm_property_create_range(dev, 0, "right margin", 0, 100); - if (!dev->mode_config.tv_right_margin_property) - goto nomem; - - dev->mode_config.tv_top_margin_property = - drm_property_create_range(dev, 0, "top margin", 0, 100); - if (!dev->mode_config.tv_top_margin_property) - goto nomem; - - dev->mode_config.tv_bottom_margin_property = - drm_property_create_range(dev, 0, "bottom margin", 0, 100); - if (!dev->mode_config.tv_bottom_margin_property) - goto nomem; - - dev->mode_config.tv_mode_property = - drm_property_create(dev, DRM_MODE_PROP_ENUM, - "mode", num_modes); - if (!dev->mode_config.tv_mode_property) - goto nomem; - - for (i = 0; i < num_modes; i++) - drm_property_add_enum(dev->mode_config.tv_mode_property, i, - i, modes[i]); - - dev->mode_config.tv_brightness_property = - drm_property_create_range(dev, 0, "brightness", 0, 100); - if (!dev->mode_config.tv_brightness_property) - goto nomem; - - dev->mode_config.tv_contrast_property = - drm_property_create_range(dev, 0, "contrast", 0, 100); - if (!dev->mode_config.tv_contrast_property) - goto nomem; - - dev->mode_config.tv_flicker_reduction_property = - drm_property_create_range(dev, 0, "flicker reduction", 0, 100); - if (!dev->mode_config.tv_flicker_reduction_property) - goto nomem; - - dev->mode_config.tv_overscan_property = - drm_property_create_range(dev, 0, "overscan", 0, 100); - if (!dev->mode_config.tv_overscan_property) - goto nomem; - - dev->mode_config.tv_saturation_property = - drm_property_create_range(dev, 0, "saturation", 0, 100); - if (!dev->mode_config.tv_saturation_property) - goto nomem; - - dev->mode_config.tv_hue_property = - drm_property_create_range(dev, 0, "hue", 0, 100); - if (!dev->mode_config.tv_hue_property) - goto nomem; - - return 0; -nomem: - return -ENOMEM; -} -EXPORT_SYMBOL(drm_mode_create_tv_properties); - -/** - * drm_mode_create_scaling_mode_property - create scaling mode property - * @dev: DRM device - * - * Called by a driver the first time it's needed, must be attached to desired - * connectors. - */ -int drm_mode_create_scaling_mode_property(struct drm_device *dev) -{ - struct drm_property *scaling_mode; - - if (dev->mode_config.scaling_mode_property) - return 0; - - scaling_mode = - drm_property_create_enum(dev, 0, "scaling mode", - drm_scaling_mode_enum_list, - ARRAY_SIZE(drm_scaling_mode_enum_list)); - - dev->mode_config.scaling_mode_property = scaling_mode; - - return 0; -} -EXPORT_SYMBOL(drm_mode_create_scaling_mode_property); - -/** - * drm_mode_create_aspect_ratio_property - create aspect ratio property - * @dev: DRM device - * - * Called by a driver the first time it's needed, must be attached to desired - * connectors. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_create_aspect_ratio_property(struct drm_device *dev) -{ - if (dev->mode_config.aspect_ratio_property) - return 0; - - dev->mode_config.aspect_ratio_property = - drm_property_create_enum(dev, 0, "aspect ratio", - drm_aspect_ratio_enum_list, - ARRAY_SIZE(drm_aspect_ratio_enum_list)); - - if (dev->mode_config.aspect_ratio_property == NULL) - return -ENOMEM; - - return 0; -} -EXPORT_SYMBOL(drm_mode_create_aspect_ratio_property); - -/** - * drm_mode_create_dirty_property - create dirty property - * @dev: DRM device - * - * Called by a driver the first time it's needed, must be attached to desired - * connectors. - */ -int drm_mode_create_dirty_info_property(struct drm_device *dev) -{ - struct drm_property *dirty_info; - - if (dev->mode_config.dirty_info_property) - return 0; - - dirty_info = - drm_property_create_enum(dev, DRM_MODE_PROP_IMMUTABLE, - "dirty", - drm_dirty_info_enum_list, - ARRAY_SIZE(drm_dirty_info_enum_list)); - dev->mode_config.dirty_info_property = dirty_info; - - return 0; -} -EXPORT_SYMBOL(drm_mode_create_dirty_info_property); - -/** - * drm_mode_create_suggested_offset_properties - create suggests offset properties - * @dev: DRM device - * - * Create the the suggested x/y offset property for connectors. - */ -int drm_mode_create_suggested_offset_properties(struct drm_device *dev) -{ - if (dev->mode_config.suggested_x_property && dev->mode_config.suggested_y_property) - return 0; - - dev->mode_config.suggested_x_property = - drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested X", 0, 0xffffffff); - - dev->mode_config.suggested_y_property = - drm_property_create_range(dev, DRM_MODE_PROP_IMMUTABLE, "suggested Y", 0, 0xffffffff); - - if (dev->mode_config.suggested_x_property == NULL || - dev->mode_config.suggested_y_property == NULL) - return -ENOMEM; - return 0; -} -EXPORT_SYMBOL(drm_mode_create_suggested_offset_properties); - -/** * drm_mode_getresources - get graphics configuration * @dev: drm device for the ioctl * @data: data pointer for the ioctl @@ -2123,599 +609,6 @@ int drm_mode_getcrtc(struct drm_device *dev, return 0; } -static bool drm_mode_expose_to_userspace(const struct drm_display_mode *mode, - const struct drm_file *file_priv) -{ - /* - * If user-space hasn't configured the driver to expose the stereo 3D - * modes, don't expose them. - */ - if (!file_priv->stereo_allowed && drm_mode_is_stereo(mode)) - return false; - - return true; -} - -static struct drm_encoder *drm_connector_get_encoder(struct drm_connector *connector) -{ - /* For atomic drivers only state objects are synchronously updated and - * protected by modeset locks, so check those first. */ - if (connector->state) - return connector->state->best_encoder; - return connector->encoder; -} - -/* helper for getconnector and getproperties ioctls */ -static int get_properties(struct drm_mode_object *obj, bool atomic, - uint32_t __user *prop_ptr, uint64_t __user *prop_values, - uint32_t *arg_count_props) -{ - int props_count; - int i, ret, copied; - - props_count = obj->properties->count; - if (!atomic) - props_count -= obj->properties->atomic_count; - - if ((*arg_count_props >= props_count) && props_count) { - for (i = 0, copied = 0; copied < props_count; i++) { - struct drm_property *prop = obj->properties->properties[i]; - uint64_t val; - - if ((prop->flags & DRM_MODE_PROP_ATOMIC) && !atomic) - continue; - - ret = drm_object_property_get_value(obj, prop, &val); - if (ret) - return ret; - - if (put_user(prop->base.id, prop_ptr + copied)) - return -EFAULT; - - if (put_user(val, prop_values + copied)) - return -EFAULT; - - copied++; - } - } - *arg_count_props = props_count; - - return 0; -} - -/** - * drm_mode_getconnector - get connector configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Construct a connector configuration structure to return to the user. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getconnector(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_get_connector *out_resp = data; - struct drm_connector *connector; - struct drm_encoder *encoder; - struct drm_display_mode *mode; - int mode_count = 0; - int encoders_count = 0; - int ret = 0; - int copied = 0; - int i; - struct drm_mode_modeinfo u_mode; - struct drm_mode_modeinfo __user *mode_ptr; - uint32_t __user *encoder_ptr; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - memset(&u_mode, 0, sizeof(struct drm_mode_modeinfo)); - - mutex_lock(&dev->mode_config.mutex); - - connector = drm_connector_lookup(dev, out_resp->connector_id); - if (!connector) { - ret = -ENOENT; - goto out_unlock; - } - - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) - if (connector->encoder_ids[i] != 0) - encoders_count++; - - if (out_resp->count_modes == 0) { - connector->funcs->fill_modes(connector, - dev->mode_config.max_width, - dev->mode_config.max_height); - } - - /* delayed so we get modes regardless of pre-fill_modes state */ - list_for_each_entry(mode, &connector->modes, head) - if (drm_mode_expose_to_userspace(mode, file_priv)) - mode_count++; - - out_resp->connector_id = connector->base.id; - out_resp->connector_type = connector->connector_type; - out_resp->connector_type_id = connector->connector_type_id; - out_resp->mm_width = connector->display_info.width_mm; - out_resp->mm_height = connector->display_info.height_mm; - out_resp->subpixel = connector->display_info.subpixel_order; - out_resp->connection = connector->status; - - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); - encoder = drm_connector_get_encoder(connector); - if (encoder) - out_resp->encoder_id = encoder->base.id; - else - out_resp->encoder_id = 0; - - /* - * This ioctl is called twice, once to determine how much space is - * needed, and the 2nd time to fill it. - */ - if ((out_resp->count_modes >= mode_count) && mode_count) { - copied = 0; - mode_ptr = (struct drm_mode_modeinfo __user *)(unsigned long)out_resp->modes_ptr; - list_for_each_entry(mode, &connector->modes, head) { - if (!drm_mode_expose_to_userspace(mode, file_priv)) - continue; - - drm_mode_convert_to_umode(&u_mode, mode); - if (copy_to_user(mode_ptr + copied, - &u_mode, sizeof(u_mode))) { - ret = -EFAULT; - goto out; - } - copied++; - } - } - out_resp->count_modes = mode_count; - - ret = get_properties(&connector->base, file_priv->atomic, - (uint32_t __user *)(unsigned long)(out_resp->props_ptr), - (uint64_t __user *)(unsigned long)(out_resp->prop_values_ptr), - &out_resp->count_props); - if (ret) - goto out; - - if ((out_resp->count_encoders >= encoders_count) && encoders_count) { - copied = 0; - encoder_ptr = (uint32_t __user *)(unsigned long)(out_resp->encoders_ptr); - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { - if (connector->encoder_ids[i] != 0) { - if (put_user(connector->encoder_ids[i], - encoder_ptr + copied)) { - ret = -EFAULT; - goto out; - } - copied++; - } - } - } - out_resp->count_encoders = encoders_count; - -out: - drm_modeset_unlock(&dev->mode_config.connection_mutex); - - drm_connector_unreference(connector); -out_unlock: - mutex_unlock(&dev->mode_config.mutex); - - return ret; -} - -static struct drm_crtc *drm_encoder_get_crtc(struct drm_encoder *encoder) -{ - struct drm_connector *connector; - struct drm_device *dev = encoder->dev; - bool uses_atomic = false; - - /* For atomic drivers only state objects are synchronously updated and - * protected by modeset locks, so check those first. */ - drm_for_each_connector(connector, dev) { - if (!connector->state) - continue; - - uses_atomic = true; - - if (connector->state->best_encoder != encoder) - continue; - - return connector->state->crtc; - } - - /* Don't return stale data (e.g. pending async disable). */ - if (uses_atomic) - return NULL; - - return encoder->crtc; -} - -/** - * drm_mode_getencoder - get encoder configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Construct a encoder configuration structure to return to the user. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getencoder(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_get_encoder *enc_resp = data; - struct drm_encoder *encoder; - struct drm_crtc *crtc; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - encoder = drm_encoder_find(dev, enc_resp->encoder_id); - if (!encoder) - return -ENOENT; - - drm_modeset_lock(&dev->mode_config.connection_mutex, NULL); - crtc = drm_encoder_get_crtc(encoder); - if (crtc) - enc_resp->crtc_id = crtc->base.id; - else - enc_resp->crtc_id = 0; - drm_modeset_unlock(&dev->mode_config.connection_mutex); - - enc_resp->encoder_type = encoder->encoder_type; - enc_resp->encoder_id = encoder->base.id; - enc_resp->possible_crtcs = encoder->possible_crtcs; - enc_resp->possible_clones = encoder->possible_clones; - - return 0; -} - -/** - * drm_mode_getplane_res - enumerate all plane resources - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * Construct a list of plane ids to return to the user. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getplane_res(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_get_plane_res *plane_resp = data; - struct drm_mode_config *config; - struct drm_plane *plane; - uint32_t __user *plane_ptr; - int copied = 0; - unsigned num_planes; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - config = &dev->mode_config; - - if (file_priv->universal_planes) - num_planes = config->num_total_plane; - else - num_planes = config->num_overlay_plane; - - /* - * This ioctl is called twice, once to determine how much space is - * needed, and the 2nd time to fill it. - */ - if (num_planes && - (plane_resp->count_planes >= num_planes)) { - plane_ptr = (uint32_t __user *)(unsigned long)plane_resp->plane_id_ptr; - - /* Plane lists are invariant, no locking needed. */ - drm_for_each_plane(plane, dev) { - /* - * Unless userspace set the 'universal planes' - * capability bit, only advertise overlays. - */ - if (plane->type != DRM_PLANE_TYPE_OVERLAY && - !file_priv->universal_planes) - continue; - - if (put_user(plane->base.id, plane_ptr + copied)) - return -EFAULT; - copied++; - } - } - plane_resp->count_planes = num_planes; - - return 0; -} - -/** - * drm_mode_getplane - get plane configuration - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * Construct a plane configuration structure to return to the user. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getplane(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_get_plane *plane_resp = data; - struct drm_plane *plane; - uint32_t __user *format_ptr; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - plane = drm_plane_find(dev, plane_resp->plane_id); - if (!plane) - return -ENOENT; - - drm_modeset_lock(&plane->mutex, NULL); - if (plane->crtc) - plane_resp->crtc_id = plane->crtc->base.id; - else - plane_resp->crtc_id = 0; - - if (plane->fb) - plane_resp->fb_id = plane->fb->base.id; - else - plane_resp->fb_id = 0; - drm_modeset_unlock(&plane->mutex); - - plane_resp->plane_id = plane->base.id; - plane_resp->possible_crtcs = plane->possible_crtcs; - plane_resp->gamma_size = 0; - - /* - * This ioctl is called twice, once to determine how much space is - * needed, and the 2nd time to fill it. - */ - if (plane->format_count && - (plane_resp->count_format_types >= plane->format_count)) { - format_ptr = (uint32_t __user *)(unsigned long)plane_resp->format_type_ptr; - if (copy_to_user(format_ptr, - plane->format_types, - sizeof(uint32_t) * plane->format_count)) { - return -EFAULT; - } - } - plane_resp->count_format_types = plane->format_count; - - return 0; -} - -/** - * drm_plane_check_pixel_format - Check if the plane supports the pixel format - * @plane: plane to check for format support - * @format: the pixel format - * - * Returns: - * Zero of @plane has @format in its list of supported pixel formats, -EINVAL - * otherwise. - */ -int drm_plane_check_pixel_format(const struct drm_plane *plane, u32 format) -{ - unsigned int i; - - for (i = 0; i < plane->format_count; i++) { - if (format == plane->format_types[i]) - return 0; - } - - return -EINVAL; -} - -static int check_src_coords(uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h, - const struct drm_framebuffer *fb) -{ - unsigned int fb_width, fb_height; - - fb_width = fb->width << 16; - fb_height = fb->height << 16; - - /* Make sure source coordinates are inside the fb. */ - if (src_w > fb_width || - src_x > fb_width - src_w || - src_h > fb_height || - src_y > fb_height - src_h) { - DRM_DEBUG_KMS("Invalid source coordinates " - "%u.%06ux%u.%06u+%u.%06u+%u.%06u\n", - src_w >> 16, ((src_w & 0xffff) * 15625) >> 10, - src_h >> 16, ((src_h & 0xffff) * 15625) >> 10, - src_x >> 16, ((src_x & 0xffff) * 15625) >> 10, - src_y >> 16, ((src_y & 0xffff) * 15625) >> 10); - return -ENOSPC; - } - - return 0; -} - -/* - * setplane_internal - setplane handler for internal callers - * - * Note that we assume an extra reference has already been taken on fb. If the - * update fails, this reference will be dropped before return; if it succeeds, - * the previous framebuffer (if any) will be unreferenced instead. - * - * src_{x,y,w,h} are provided in 16.16 fixed point format - */ -static int __setplane_internal(struct drm_plane *plane, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int32_t crtc_x, int32_t crtc_y, - uint32_t crtc_w, uint32_t crtc_h, - /* src_{x,y,w,h} values are 16.16 fixed point */ - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) -{ - int ret = 0; - - /* No fb means shut it down */ - if (!fb) { - plane->old_fb = plane->fb; - ret = plane->funcs->disable_plane(plane); - if (!ret) { - plane->crtc = NULL; - plane->fb = NULL; - } else { - plane->old_fb = NULL; - } - goto out; - } - - /* Check whether this plane is usable on this CRTC */ - if (!(plane->possible_crtcs & drm_crtc_mask(crtc))) { - DRM_DEBUG_KMS("Invalid crtc for plane\n"); - ret = -EINVAL; - goto out; - } - - /* Check whether this plane supports the fb pixel format. */ - ret = drm_plane_check_pixel_format(plane, fb->pixel_format); - if (ret) { - DRM_DEBUG_KMS("Invalid pixel format %s\n", - drm_get_format_name(fb->pixel_format)); - goto out; - } - - /* Give drivers some help against integer overflows */ - if (crtc_w > INT_MAX || - crtc_x > INT_MAX - (int32_t) crtc_w || - crtc_h > INT_MAX || - crtc_y > INT_MAX - (int32_t) crtc_h) { - DRM_DEBUG_KMS("Invalid CRTC coordinates %ux%u+%d+%d\n", - crtc_w, crtc_h, crtc_x, crtc_y); - ret = -ERANGE; - goto out; - } - - ret = check_src_coords(src_x, src_y, src_w, src_h, fb); - if (ret) - goto out; - - plane->old_fb = plane->fb; - ret = plane->funcs->update_plane(plane, crtc, fb, - crtc_x, crtc_y, crtc_w, crtc_h, - src_x, src_y, src_w, src_h); - if (!ret) { - plane->crtc = crtc; - plane->fb = fb; - fb = NULL; - } else { - plane->old_fb = NULL; - } - -out: - if (fb) - drm_framebuffer_unreference(fb); - if (plane->old_fb) - drm_framebuffer_unreference(plane->old_fb); - plane->old_fb = NULL; - - return ret; -} - -static int setplane_internal(struct drm_plane *plane, - struct drm_crtc *crtc, - struct drm_framebuffer *fb, - int32_t crtc_x, int32_t crtc_y, - uint32_t crtc_w, uint32_t crtc_h, - /* src_{x,y,w,h} values are 16.16 fixed point */ - uint32_t src_x, uint32_t src_y, - uint32_t src_w, uint32_t src_h) -{ - int ret; - - drm_modeset_lock_all(plane->dev); - ret = __setplane_internal(plane, crtc, fb, - crtc_x, crtc_y, crtc_w, crtc_h, - src_x, src_y, src_w, src_h); - drm_modeset_unlock_all(plane->dev); - - return ret; -} - -/** - * drm_mode_setplane - configure a plane's configuration - * @dev: DRM device - * @data: ioctl data* - * @file_priv: DRM file info - * - * Set plane configuration, including placement, fb, scaling, and other factors. - * Or pass a NULL fb to disable (planes may be disabled without providing a - * valid crtc). - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_setplane(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_set_plane *plane_req = data; - struct drm_plane *plane; - struct drm_crtc *crtc = NULL; - struct drm_framebuffer *fb = NULL; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - /* - * First, find the plane, crtc, and fb objects. If not available, - * we don't bother to call the driver. - */ - plane = drm_plane_find(dev, plane_req->plane_id); - if (!plane) { - DRM_DEBUG_KMS("Unknown plane ID %d\n", - plane_req->plane_id); - return -ENOENT; - } - - if (plane_req->fb_id) { - fb = drm_framebuffer_lookup(dev, plane_req->fb_id); - if (!fb) { - DRM_DEBUG_KMS("Unknown framebuffer ID %d\n", - plane_req->fb_id); - return -ENOENT; - } - - crtc = drm_crtc_find(dev, plane_req->crtc_id); - if (!crtc) { - DRM_DEBUG_KMS("Unknown crtc ID %d\n", - plane_req->crtc_id); - return -ENOENT; - } - } - - /* - * setplane_internal will take care of deref'ing either the old or new - * framebuffer depending on success. - */ - return setplane_internal(plane, crtc, fb, - plane_req->crtc_x, plane_req->crtc_y, - plane_req->crtc_w, plane_req->crtc_h, - plane_req->src_x, plane_req->src_y, - plane_req->src_w, plane_req->src_h); -} - /** * drm_mode_set_config_internal - helper to call ->set_config * @set: modeset config to set @@ -2802,12 +695,13 @@ int drm_crtc_check_viewport(const struct drm_crtc *crtc, drm_crtc_get_hv_timing(mode, &hdisplay, &vdisplay); if (crtc->state && - crtc->primary->state->rotation & (BIT(DRM_ROTATE_90) | - BIT(DRM_ROTATE_270))) + crtc->primary->state->rotation & (DRM_ROTATE_90 | + DRM_ROTATE_270)) swap(hdisplay, vdisplay); - return check_src_coords(x << 16, y << 16, - hdisplay << 16, vdisplay << 16, fb); + return drm_framebuffer_check_src_coords(x << 16, y << 16, + hdisplay << 16, vdisplay << 16, + fb); } EXPORT_SYMBOL(drm_crtc_check_viewport); @@ -2902,8 +796,9 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, ret = drm_plane_check_pixel_format(crtc->primary, fb->pixel_format); if (ret) { - DRM_DEBUG_KMS("Invalid pixel format %s\n", - drm_get_format_name(fb->pixel_format)); + char *format_name = drm_get_format_name(fb->pixel_format); + DRM_DEBUG_KMS("Invalid pixel format %s\n", format_name); + kfree(format_name); goto out; } } @@ -2993,2004 +888,9 @@ out: return ret; } -/** - * drm_mode_cursor_universal - translate legacy cursor ioctl call into a - * universal plane handler call - * @crtc: crtc to update cursor for - * @req: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Legacy cursor ioctl's work directly with driver buffer handles. To - * translate legacy ioctl calls into universal plane handler calls, we need to - * wrap the native buffer handle in a drm_framebuffer. - * - * Note that we assume any handle passed to the legacy ioctls was a 32-bit ARGB - * buffer with a pitch of 4*width; the universal plane interface should be used - * directly in cases where the hardware can support other buffer settings and - * userspace wants to make use of these capabilities. - * - * Returns: - * Zero on success, negative errno on failure. - */ -static int drm_mode_cursor_universal(struct drm_crtc *crtc, - struct drm_mode_cursor2 *req, - struct drm_file *file_priv) -{ - struct drm_device *dev = crtc->dev; - struct drm_framebuffer *fb = NULL; - struct drm_mode_fb_cmd2 fbreq = { - .width = req->width, - .height = req->height, - .pixel_format = DRM_FORMAT_ARGB8888, - .pitches = { req->width * 4 }, - .handles = { req->handle }, - }; - int32_t crtc_x, crtc_y; - uint32_t crtc_w = 0, crtc_h = 0; - uint32_t src_w = 0, src_h = 0; - int ret = 0; - - BUG_ON(!crtc->cursor); - WARN_ON(crtc->cursor->crtc != crtc && crtc->cursor->crtc != NULL); - - /* - * Obtain fb we'll be using (either new or existing) and take an extra - * reference to it if fb != null. setplane will take care of dropping - * the reference if the plane update fails. - */ - if (req->flags & DRM_MODE_CURSOR_BO) { - if (req->handle) { - fb = internal_framebuffer_create(dev, &fbreq, file_priv); - if (IS_ERR(fb)) { - DRM_DEBUG_KMS("failed to wrap cursor buffer in drm framebuffer\n"); - return PTR_ERR(fb); - } - fb->hot_x = req->hot_x; - fb->hot_y = req->hot_y; - } else { - fb = NULL; - } - } else { - fb = crtc->cursor->fb; - if (fb) - drm_framebuffer_reference(fb); - } - - if (req->flags & DRM_MODE_CURSOR_MOVE) { - crtc_x = req->x; - crtc_y = req->y; - } else { - crtc_x = crtc->cursor_x; - crtc_y = crtc->cursor_y; - } - - if (fb) { - crtc_w = fb->width; - crtc_h = fb->height; - src_w = fb->width << 16; - src_h = fb->height << 16; - } - - /* - * setplane_internal will take care of deref'ing either the old or new - * framebuffer depending on success. - */ - ret = __setplane_internal(crtc->cursor, crtc, fb, - crtc_x, crtc_y, crtc_w, crtc_h, - 0, 0, src_w, src_h); - - /* Update successful; save new cursor position, if necessary */ - if (ret == 0 && req->flags & DRM_MODE_CURSOR_MOVE) { - crtc->cursor_x = req->x; - crtc->cursor_y = req->y; - } - - return ret; -} - -static int drm_mode_cursor_common(struct drm_device *dev, - struct drm_mode_cursor2 *req, - struct drm_file *file_priv) -{ - struct drm_crtc *crtc; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - if (!req->flags || (~DRM_MODE_CURSOR_FLAGS & req->flags)) - return -EINVAL; - - crtc = drm_crtc_find(dev, req->crtc_id); - if (!crtc) { - DRM_DEBUG_KMS("Unknown CRTC ID %d\n", req->crtc_id); - return -ENOENT; - } - - /* - * If this crtc has a universal cursor plane, call that plane's update - * handler rather than using legacy cursor handlers. - */ - drm_modeset_lock_crtc(crtc, crtc->cursor); - if (crtc->cursor) { - ret = drm_mode_cursor_universal(crtc, req, file_priv); - goto out; - } - - if (req->flags & DRM_MODE_CURSOR_BO) { - if (!crtc->funcs->cursor_set && !crtc->funcs->cursor_set2) { - ret = -ENXIO; - goto out; - } - /* Turns off the cursor if handle is 0 */ - if (crtc->funcs->cursor_set2) - ret = crtc->funcs->cursor_set2(crtc, file_priv, req->handle, - req->width, req->height, req->hot_x, req->hot_y); - else - ret = crtc->funcs->cursor_set(crtc, file_priv, req->handle, - req->width, req->height); - } - - if (req->flags & DRM_MODE_CURSOR_MOVE) { - if (crtc->funcs->cursor_move) { - ret = crtc->funcs->cursor_move(crtc, req->x, req->y); - } else { - ret = -EFAULT; - goto out; - } - } -out: - drm_modeset_unlock_crtc(crtc); - - return ret; - -} - - -/** - * drm_mode_cursor_ioctl - set CRTC's cursor configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Set the cursor configuration based on user request. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_cursor_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_cursor *req = data; - struct drm_mode_cursor2 new_req; - - memcpy(&new_req, req, sizeof(struct drm_mode_cursor)); - new_req.hot_x = new_req.hot_y = 0; - - return drm_mode_cursor_common(dev, &new_req, file_priv); -} - -/** - * drm_mode_cursor2_ioctl - set CRTC's cursor configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Set the cursor configuration based on user request. This implements the 2nd - * version of the cursor ioctl, which allows userspace to additionally specify - * the hotspot of the pointer. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_cursor2_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_cursor2 *req = data; - - return drm_mode_cursor_common(dev, req, file_priv); -} - -/** - * drm_mode_legacy_fb_format - compute drm fourcc code from legacy description - * @bpp: bits per pixels - * @depth: bit depth per pixel - * - * Computes a drm fourcc pixel format code for the given @bpp/@depth values. - * Useful in fbdev emulation code, since that deals in those values. - */ -uint32_t drm_mode_legacy_fb_format(uint32_t bpp, uint32_t depth) -{ - uint32_t fmt; - - switch (bpp) { - case 8: - fmt = DRM_FORMAT_C8; - break; - case 16: - if (depth == 15) - fmt = DRM_FORMAT_XRGB1555; - else - fmt = DRM_FORMAT_RGB565; - break; - case 24: - fmt = DRM_FORMAT_RGB888; - break; - case 32: - if (depth == 24) - fmt = DRM_FORMAT_XRGB8888; - else if (depth == 30) - fmt = DRM_FORMAT_XRGB2101010; - else - fmt = DRM_FORMAT_ARGB8888; - break; - default: - DRM_ERROR("bad bpp, assuming x8r8g8b8 pixel format\n"); - fmt = DRM_FORMAT_XRGB8888; - break; - } - - return fmt; -} -EXPORT_SYMBOL(drm_mode_legacy_fb_format); - -/** - * drm_mode_addfb - add an FB to the graphics configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Add a new FB to the specified CRTC, given a user request. This is the - * original addfb ioctl which only supported RGB formats. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_addfb(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_fb_cmd *or = data; - struct drm_mode_fb_cmd2 r = {}; - int ret; - - /* convert to new format and call new ioctl */ - r.fb_id = or->fb_id; - r.width = or->width; - r.height = or->height; - r.pitches[0] = or->pitch; - r.pixel_format = drm_mode_legacy_fb_format(or->bpp, or->depth); - r.handles[0] = or->handle; - - ret = drm_mode_addfb2(dev, &r, file_priv); - if (ret) - return ret; - - or->fb_id = r.fb_id; - - return 0; -} - -static int format_check(const struct drm_mode_fb_cmd2 *r) -{ - uint32_t format = r->pixel_format & ~DRM_FORMAT_BIG_ENDIAN; - - switch (format) { - case DRM_FORMAT_C8: - case DRM_FORMAT_RGB332: - case DRM_FORMAT_BGR233: - case DRM_FORMAT_XRGB4444: - case DRM_FORMAT_XBGR4444: - case DRM_FORMAT_RGBX4444: - case DRM_FORMAT_BGRX4444: - case DRM_FORMAT_ARGB4444: - case DRM_FORMAT_ABGR4444: - case DRM_FORMAT_RGBA4444: - case DRM_FORMAT_BGRA4444: - case DRM_FORMAT_XRGB1555: - case DRM_FORMAT_XBGR1555: - case DRM_FORMAT_RGBX5551: - case DRM_FORMAT_BGRX5551: - case DRM_FORMAT_ARGB1555: - case DRM_FORMAT_ABGR1555: - case DRM_FORMAT_RGBA5551: - case DRM_FORMAT_BGRA5551: - case DRM_FORMAT_RGB565: - case DRM_FORMAT_BGR565: - case DRM_FORMAT_RGB888: - case DRM_FORMAT_BGR888: - case DRM_FORMAT_XRGB8888: - case DRM_FORMAT_XBGR8888: - case DRM_FORMAT_RGBX8888: - case DRM_FORMAT_BGRX8888: - case DRM_FORMAT_ARGB8888: - case DRM_FORMAT_ABGR8888: - case DRM_FORMAT_RGBA8888: - case DRM_FORMAT_BGRA8888: - case DRM_FORMAT_XRGB2101010: - case DRM_FORMAT_XBGR2101010: - case DRM_FORMAT_RGBX1010102: - case DRM_FORMAT_BGRX1010102: - case DRM_FORMAT_ARGB2101010: - case DRM_FORMAT_ABGR2101010: - case DRM_FORMAT_RGBA1010102: - case DRM_FORMAT_BGRA1010102: - case DRM_FORMAT_YUYV: - case DRM_FORMAT_YVYU: - case DRM_FORMAT_UYVY: - case DRM_FORMAT_VYUY: - case DRM_FORMAT_AYUV: - case DRM_FORMAT_NV12: - case DRM_FORMAT_NV21: - case DRM_FORMAT_NV16: - case DRM_FORMAT_NV61: - case DRM_FORMAT_NV24: - case DRM_FORMAT_NV42: - case DRM_FORMAT_YUV410: - case DRM_FORMAT_YVU410: - case DRM_FORMAT_YUV411: - case DRM_FORMAT_YVU411: - case DRM_FORMAT_YUV420: - case DRM_FORMAT_YVU420: - case DRM_FORMAT_YUV422: - case DRM_FORMAT_YVU422: - case DRM_FORMAT_YUV444: - case DRM_FORMAT_YVU444: - return 0; - default: - DRM_DEBUG_KMS("invalid pixel format %s\n", - drm_get_format_name(r->pixel_format)); - return -EINVAL; - } -} - -static int framebuffer_check(const struct drm_mode_fb_cmd2 *r) -{ - int ret, hsub, vsub, num_planes, i; - - ret = format_check(r); - if (ret) { - DRM_DEBUG_KMS("bad framebuffer format %s\n", - drm_get_format_name(r->pixel_format)); - return ret; - } - - hsub = drm_format_horz_chroma_subsampling(r->pixel_format); - vsub = drm_format_vert_chroma_subsampling(r->pixel_format); - num_planes = drm_format_num_planes(r->pixel_format); - - if (r->width == 0 || r->width % hsub) { - DRM_DEBUG_KMS("bad framebuffer width %u\n", r->width); - return -EINVAL; - } - - if (r->height == 0 || r->height % vsub) { - DRM_DEBUG_KMS("bad framebuffer height %u\n", r->height); - return -EINVAL; - } - - for (i = 0; i < num_planes; i++) { - unsigned int width = r->width / (i != 0 ? hsub : 1); - unsigned int height = r->height / (i != 0 ? vsub : 1); - unsigned int cpp = drm_format_plane_cpp(r->pixel_format, i); - - if (!r->handles[i]) { - DRM_DEBUG_KMS("no buffer object handle for plane %d\n", i); - return -EINVAL; - } - - if ((uint64_t) width * cpp > UINT_MAX) - return -ERANGE; - - if ((uint64_t) height * r->pitches[i] + r->offsets[i] > UINT_MAX) - return -ERANGE; - - if (r->pitches[i] < width * cpp) { - DRM_DEBUG_KMS("bad pitch %u for plane %d\n", r->pitches[i], i); - return -EINVAL; - } - - if (r->modifier[i] && !(r->flags & DRM_MODE_FB_MODIFIERS)) { - DRM_DEBUG_KMS("bad fb modifier %llu for plane %d\n", - r->modifier[i], i); - return -EINVAL; - } - - /* modifier specific checks: */ - switch (r->modifier[i]) { - case DRM_FORMAT_MOD_SAMSUNG_64_32_TILE: - /* NOTE: the pitch restriction may be lifted later if it turns - * out that no hw has this restriction: - */ - if (r->pixel_format != DRM_FORMAT_NV12 || - width % 128 || height % 32 || - r->pitches[i] % 128) { - DRM_DEBUG_KMS("bad modifier data for plane %d\n", i); - return -EINVAL; - } - break; - - default: - break; - } - } - - for (i = num_planes; i < 4; i++) { - if (r->modifier[i]) { - DRM_DEBUG_KMS("non-zero modifier for unused plane %d\n", i); - return -EINVAL; - } - - /* Pre-FB_MODIFIERS userspace didn't clear the structs properly. */ - if (!(r->flags & DRM_MODE_FB_MODIFIERS)) - continue; - - if (r->handles[i]) { - DRM_DEBUG_KMS("buffer object handle for unused plane %d\n", i); - return -EINVAL; - } - - if (r->pitches[i]) { - DRM_DEBUG_KMS("non-zero pitch for unused plane %d\n", i); - return -EINVAL; - } - - if (r->offsets[i]) { - DRM_DEBUG_KMS("non-zero offset for unused plane %d\n", i); - return -EINVAL; - } - } - - return 0; -} - -static struct drm_framebuffer * -internal_framebuffer_create(struct drm_device *dev, - const struct drm_mode_fb_cmd2 *r, - struct drm_file *file_priv) -{ - struct drm_mode_config *config = &dev->mode_config; - struct drm_framebuffer *fb; - int ret; - - if (r->flags & ~(DRM_MODE_FB_INTERLACED | DRM_MODE_FB_MODIFIERS)) { - DRM_DEBUG_KMS("bad framebuffer flags 0x%08x\n", r->flags); - return ERR_PTR(-EINVAL); - } - - if ((config->min_width > r->width) || (r->width > config->max_width)) { - DRM_DEBUG_KMS("bad framebuffer width %d, should be >= %d && <= %d\n", - r->width, config->min_width, config->max_width); - return ERR_PTR(-EINVAL); - } - if ((config->min_height > r->height) || (r->height > config->max_height)) { - DRM_DEBUG_KMS("bad framebuffer height %d, should be >= %d && <= %d\n", - r->height, config->min_height, config->max_height); - return ERR_PTR(-EINVAL); - } - - if (r->flags & DRM_MODE_FB_MODIFIERS && - !dev->mode_config.allow_fb_modifiers) { - DRM_DEBUG_KMS("driver does not support fb modifiers\n"); - return ERR_PTR(-EINVAL); - } - - ret = framebuffer_check(r); - if (ret) - return ERR_PTR(ret); - - fb = dev->mode_config.funcs->fb_create(dev, file_priv, r); - if (IS_ERR(fb)) { - DRM_DEBUG_KMS("could not create framebuffer\n"); - return fb; - } - - return fb; -} - -/** - * drm_mode_addfb2 - add an FB to the graphics configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Add a new FB to the specified CRTC, given a user request with format. This is - * the 2nd version of the addfb ioctl, which supports multi-planar framebuffers - * and uses fourcc codes as pixel format specifiers. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_addfb2(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_fb_cmd2 *r = data; - struct drm_framebuffer *fb; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - fb = internal_framebuffer_create(dev, r, file_priv); - if (IS_ERR(fb)) - return PTR_ERR(fb); - - DRM_DEBUG_KMS("[FB:%d]\n", fb->base.id); - r->fb_id = fb->base.id; - - /* Transfer ownership to the filp for reaping on close */ - mutex_lock(&file_priv->fbs_lock); - list_add(&fb->filp_head, &file_priv->fbs); - mutex_unlock(&file_priv->fbs_lock); - - return 0; -} - -struct drm_mode_rmfb_work { - struct work_struct work; - struct list_head fbs; -}; - -static void drm_mode_rmfb_work_fn(struct work_struct *w) -{ - struct drm_mode_rmfb_work *arg = container_of(w, typeof(*arg), work); - - while (!list_empty(&arg->fbs)) { - struct drm_framebuffer *fb = - list_first_entry(&arg->fbs, typeof(*fb), filp_head); - - list_del_init(&fb->filp_head); - drm_framebuffer_remove(fb); - } -} - -/** - * drm_mode_rmfb - remove an FB from the configuration - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Remove the FB specified by the user. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_rmfb(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_framebuffer *fb = NULL; - struct drm_framebuffer *fbl = NULL; - uint32_t *id = data; - int found = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - fb = drm_framebuffer_lookup(dev, *id); - if (!fb) - return -ENOENT; - - mutex_lock(&file_priv->fbs_lock); - list_for_each_entry(fbl, &file_priv->fbs, filp_head) - if (fb == fbl) - found = 1; - if (!found) { - mutex_unlock(&file_priv->fbs_lock); - goto fail_unref; - } - - list_del_init(&fb->filp_head); - mutex_unlock(&file_priv->fbs_lock); - - /* drop the reference we picked up in framebuffer lookup */ - drm_framebuffer_unreference(fb); - - /* - * we now own the reference that was stored in the fbs list - * - * drm_framebuffer_remove may fail with -EINTR on pending signals, - * so run this in a separate stack as there's no way to correctly - * handle this after the fb is already removed from the lookup table. - */ - if (drm_framebuffer_read_refcount(fb) > 1) { - struct drm_mode_rmfb_work arg; - - INIT_WORK_ONSTACK(&arg.work, drm_mode_rmfb_work_fn); - INIT_LIST_HEAD(&arg.fbs); - list_add_tail(&fb->filp_head, &arg.fbs); - - schedule_work(&arg.work); - flush_work(&arg.work); - destroy_work_on_stack(&arg.work); - } else - drm_framebuffer_unreference(fb); - - return 0; - -fail_unref: - drm_framebuffer_unreference(fb); - return -ENOENT; -} - -/** - * drm_mode_getfb - get FB info - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Lookup the FB given its ID and return info about it. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getfb(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_fb_cmd *r = data; - struct drm_framebuffer *fb; - int ret; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - fb = drm_framebuffer_lookup(dev, r->fb_id); - if (!fb) - return -ENOENT; - - r->height = fb->height; - r->width = fb->width; - r->depth = fb->depth; - r->bpp = fb->bits_per_pixel; - r->pitch = fb->pitches[0]; - if (fb->funcs->create_handle) { - if (drm_is_current_master(file_priv) || capable(CAP_SYS_ADMIN) || - drm_is_control_client(file_priv)) { - ret = fb->funcs->create_handle(fb, file_priv, - &r->handle); - } else { - /* GET_FB() is an unprivileged ioctl so we must not - * return a buffer-handle to non-master processes! For - * backwards-compatibility reasons, we cannot make - * GET_FB() privileged, so just return an invalid handle - * for non-masters. */ - r->handle = 0; - ret = 0; - } - } else { - ret = -ENODEV; - } - - drm_framebuffer_unreference(fb); - - return ret; -} - -/** - * drm_mode_dirtyfb_ioctl - flush frontbuffer rendering on an FB - * @dev: drm device for the ioctl - * @data: data pointer for the ioctl - * @file_priv: drm file for the ioctl call - * - * Lookup the FB and flush out the damaged area supplied by userspace as a clip - * rectangle list. Generic userspace which does frontbuffer rendering must call - * this ioctl to flush out the changes on manual-update display outputs, e.g. - * usb display-link, mipi manual update panels or edp panel self refresh modes. - * - * Modesetting drivers which always update the frontbuffer do not need to - * implement the corresponding ->dirty framebuffer callback. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_dirtyfb_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_clip_rect __user *clips_ptr; - struct drm_clip_rect *clips = NULL; - struct drm_mode_fb_dirty_cmd *r = data; - struct drm_framebuffer *fb; - unsigned flags; - int num_clips; - int ret; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - fb = drm_framebuffer_lookup(dev, r->fb_id); - if (!fb) - return -ENOENT; - - num_clips = r->num_clips; - clips_ptr = (struct drm_clip_rect __user *)(unsigned long)r->clips_ptr; - - if (!num_clips != !clips_ptr) { - ret = -EINVAL; - goto out_err1; - } - - flags = DRM_MODE_FB_DIRTY_FLAGS & r->flags; - - /* If userspace annotates copy, clips must come in pairs */ - if (flags & DRM_MODE_FB_DIRTY_ANNOTATE_COPY && (num_clips % 2)) { - ret = -EINVAL; - goto out_err1; - } - - if (num_clips && clips_ptr) { - if (num_clips < 0 || num_clips > DRM_MODE_FB_DIRTY_MAX_CLIPS) { - ret = -EINVAL; - goto out_err1; - } - clips = kcalloc(num_clips, sizeof(*clips), GFP_KERNEL); - if (!clips) { - ret = -ENOMEM; - goto out_err1; - } - - ret = copy_from_user(clips, clips_ptr, - num_clips * sizeof(*clips)); - if (ret) { - ret = -EFAULT; - goto out_err2; - } - } - - if (fb->funcs->dirty) { - ret = fb->funcs->dirty(fb, file_priv, flags, r->color, - clips, num_clips); - } else { - ret = -ENOSYS; - } - -out_err2: - kfree(clips); -out_err1: - drm_framebuffer_unreference(fb); - - return ret; -} - -/** - * drm_fb_release - remove and free the FBs on this file - * @priv: drm file for the ioctl - * - * Destroy all the FBs associated with @filp. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -void drm_fb_release(struct drm_file *priv) -{ - struct drm_framebuffer *fb, *tfb; - struct drm_mode_rmfb_work arg; - - INIT_LIST_HEAD(&arg.fbs); - - /* - * When the file gets released that means no one else can access the fb - * list any more, so no need to grab fpriv->fbs_lock. And we need to - * avoid upsetting lockdep since the universal cursor code adds a - * framebuffer while holding mutex locks. - * - * Note that a real deadlock between fpriv->fbs_lock and the modeset - * locks is impossible here since no one else but this function can get - * at it any more. - */ - list_for_each_entry_safe(fb, tfb, &priv->fbs, filp_head) { - if (drm_framebuffer_read_refcount(fb) > 1) { - list_move_tail(&fb->filp_head, &arg.fbs); - } else { - list_del_init(&fb->filp_head); - - /* This drops the fpriv->fbs reference. */ - drm_framebuffer_unreference(fb); - } - } - - if (!list_empty(&arg.fbs)) { - INIT_WORK_ONSTACK(&arg.work, drm_mode_rmfb_work_fn); - - schedule_work(&arg.work); - flush_work(&arg.work); - destroy_work_on_stack(&arg.work); - } -} - -static bool drm_property_type_valid(struct drm_property *property) -{ - if (property->flags & DRM_MODE_PROP_EXTENDED_TYPE) - return !(property->flags & DRM_MODE_PROP_LEGACY_TYPE); - return !!(property->flags & DRM_MODE_PROP_LEGACY_TYPE); -} - -/** - * drm_property_create - create a new property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @num_values: number of pre-defined values - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Note that the DRM core keeps a per-device list of properties and that, if - * drm_mode_config_cleanup() is called, it will destroy all properties created - * by the driver. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create(struct drm_device *dev, int flags, - const char *name, int num_values) -{ - struct drm_property *property = NULL; - int ret; - - property = kzalloc(sizeof(struct drm_property), GFP_KERNEL); - if (!property) - return NULL; - - property->dev = dev; - - if (num_values) { - property->values = kcalloc(num_values, sizeof(uint64_t), - GFP_KERNEL); - if (!property->values) - goto fail; - } - - ret = drm_mode_object_get(dev, &property->base, DRM_MODE_OBJECT_PROPERTY); - if (ret) - goto fail; - - property->flags = flags; - property->num_values = num_values; - INIT_LIST_HEAD(&property->enum_list); - - if (name) { - strncpy(property->name, name, DRM_PROP_NAME_LEN); - property->name[DRM_PROP_NAME_LEN-1] = '\0'; - } - - list_add_tail(&property->head, &dev->mode_config.property_list); - - WARN_ON(!drm_property_type_valid(property)); - - return property; -fail: - kfree(property->values); - kfree(property); - return NULL; -} -EXPORT_SYMBOL(drm_property_create); - -/** - * drm_property_create_enum - create a new enumeration property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @props: enumeration lists with property values - * @num_values: number of pre-defined values - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Userspace is only allowed to set one of the predefined values for enumeration - * properties. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_enum(struct drm_device *dev, int flags, - const char *name, - const struct drm_prop_enum_list *props, - int num_values) -{ - struct drm_property *property; - int i, ret; - - flags |= DRM_MODE_PROP_ENUM; - - property = drm_property_create(dev, flags, name, num_values); - if (!property) - return NULL; - - for (i = 0; i < num_values; i++) { - ret = drm_property_add_enum(property, i, - props[i].type, - props[i].name); - if (ret) { - drm_property_destroy(dev, property); - return NULL; - } - } - - return property; -} -EXPORT_SYMBOL(drm_property_create_enum); - -/** - * drm_property_create_bitmask - create a new bitmask property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @props: enumeration lists with property bitflags - * @num_props: size of the @props array - * @supported_bits: bitmask of all supported enumeration values - * - * This creates a new bitmask drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Compared to plain enumeration properties userspace is allowed to set any - * or'ed together combination of the predefined property bitflag values - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_bitmask(struct drm_device *dev, - int flags, const char *name, - const struct drm_prop_enum_list *props, - int num_props, - uint64_t supported_bits) -{ - struct drm_property *property; - int i, ret, index = 0; - int num_values = hweight64(supported_bits); - - flags |= DRM_MODE_PROP_BITMASK; - - property = drm_property_create(dev, flags, name, num_values); - if (!property) - return NULL; - for (i = 0; i < num_props; i++) { - if (!(supported_bits & (1ULL << props[i].type))) - continue; - - if (WARN_ON(index >= num_values)) { - drm_property_destroy(dev, property); - return NULL; - } - - ret = drm_property_add_enum(property, index++, - props[i].type, - props[i].name); - if (ret) { - drm_property_destroy(dev, property); - return NULL; - } - } - - return property; -} -EXPORT_SYMBOL(drm_property_create_bitmask); - -static struct drm_property *property_create_range(struct drm_device *dev, - int flags, const char *name, - uint64_t min, uint64_t max) -{ - struct drm_property *property; - - property = drm_property_create(dev, flags, name, 2); - if (!property) - return NULL; - - property->values[0] = min; - property->values[1] = max; - - return property; -} - -/** - * drm_property_create_range - create a new unsigned ranged property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @min: minimum value of the property - * @max: maximum value of the property - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Userspace is allowed to set any unsigned integer value in the (min, max) - * range inclusive. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_range(struct drm_device *dev, int flags, - const char *name, - uint64_t min, uint64_t max) -{ - return property_create_range(dev, DRM_MODE_PROP_RANGE | flags, - name, min, max); -} -EXPORT_SYMBOL(drm_property_create_range); - -/** - * drm_property_create_signed_range - create a new signed ranged property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @min: minimum value of the property - * @max: maximum value of the property - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Userspace is allowed to set any signed integer value in the (min, max) - * range inclusive. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_signed_range(struct drm_device *dev, - int flags, const char *name, - int64_t min, int64_t max) -{ - return property_create_range(dev, DRM_MODE_PROP_SIGNED_RANGE | flags, - name, I642U64(min), I642U64(max)); -} -EXPORT_SYMBOL(drm_property_create_signed_range); - -/** - * drm_property_create_object - create a new object property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * @type: object type from DRM_MODE_OBJECT_* defines - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * Userspace is only allowed to set this to any property value of the given - * @type. Only useful for atomic properties, which is enforced. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_object(struct drm_device *dev, - int flags, const char *name, uint32_t type) -{ - struct drm_property *property; - - flags |= DRM_MODE_PROP_OBJECT; - - if (WARN_ON(!(flags & DRM_MODE_PROP_ATOMIC))) - return NULL; - - property = drm_property_create(dev, flags, name, 1); - if (!property) - return NULL; - - property->values[0] = type; - - return property; -} -EXPORT_SYMBOL(drm_property_create_object); - -/** - * drm_property_create_bool - create a new boolean property type - * @dev: drm device - * @flags: flags specifying the property type - * @name: name of the property - * - * This creates a new generic drm property which can then be attached to a drm - * object with drm_object_attach_property. The returned property object must be - * freed with drm_property_destroy. - * - * This is implemented as a ranged property with only {0, 1} as valid values. - * - * Returns: - * A pointer to the newly created property on success, NULL on failure. - */ -struct drm_property *drm_property_create_bool(struct drm_device *dev, int flags, - const char *name) -{ - return drm_property_create_range(dev, flags, name, 0, 1); -} -EXPORT_SYMBOL(drm_property_create_bool); - -/** - * drm_property_add_enum - add a possible value to an enumeration property - * @property: enumeration property to change - * @index: index of the new enumeration - * @value: value of the new enumeration - * @name: symbolic name of the new enumeration - * - * This functions adds enumerations to a property. - * - * It's use is deprecated, drivers should use one of the more specific helpers - * to directly create the property with all enumerations already attached. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_property_add_enum(struct drm_property *property, int index, - uint64_t value, const char *name) -{ - struct drm_property_enum *prop_enum; - - if (!(drm_property_type_is(property, DRM_MODE_PROP_ENUM) || - drm_property_type_is(property, DRM_MODE_PROP_BITMASK))) - return -EINVAL; - - /* - * Bitmask enum properties have the additional constraint of values - * from 0 to 63 - */ - if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK) && - (value > 63)) - return -EINVAL; - - if (!list_empty(&property->enum_list)) { - list_for_each_entry(prop_enum, &property->enum_list, head) { - if (prop_enum->value == value) { - strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); - prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; - return 0; - } - } - } - - prop_enum = kzalloc(sizeof(struct drm_property_enum), GFP_KERNEL); - if (!prop_enum) - return -ENOMEM; - - strncpy(prop_enum->name, name, DRM_PROP_NAME_LEN); - prop_enum->name[DRM_PROP_NAME_LEN-1] = '\0'; - prop_enum->value = value; - - property->values[index] = value; - list_add_tail(&prop_enum->head, &property->enum_list); - return 0; -} -EXPORT_SYMBOL(drm_property_add_enum); - -/** - * drm_property_destroy - destroy a drm property - * @dev: drm device - * @property: property to destry - * - * This function frees a property including any attached resources like - * enumeration values. - */ -void drm_property_destroy(struct drm_device *dev, struct drm_property *property) -{ - struct drm_property_enum *prop_enum, *pt; - - list_for_each_entry_safe(prop_enum, pt, &property->enum_list, head) { - list_del(&prop_enum->head); - kfree(prop_enum); - } - - if (property->num_values) - kfree(property->values); - drm_mode_object_unregister(dev, &property->base); - list_del(&property->head); - kfree(property); -} -EXPORT_SYMBOL(drm_property_destroy); - -/** - * drm_object_attach_property - attach a property to a modeset object - * @obj: drm modeset object - * @property: property to attach - * @init_val: initial value of the property - * - * This attaches the given property to the modeset object with the given initial - * value. Currently this function cannot fail since the properties are stored in - * a statically sized array. - */ -void drm_object_attach_property(struct drm_mode_object *obj, - struct drm_property *property, - uint64_t init_val) -{ - int count = obj->properties->count; - - if (count == DRM_OBJECT_MAX_PROPERTY) { - WARN(1, "Failed to attach object property (type: 0x%x). Please " - "increase DRM_OBJECT_MAX_PROPERTY by 1 for each time " - "you see this message on the same object type.\n", - obj->type); - return; - } - - obj->properties->properties[count] = property; - obj->properties->values[count] = init_val; - obj->properties->count++; - if (property->flags & DRM_MODE_PROP_ATOMIC) - obj->properties->atomic_count++; -} -EXPORT_SYMBOL(drm_object_attach_property); - -/** - * drm_object_property_set_value - set the value of a property - * @obj: drm mode object to set property value for - * @property: property to set - * @val: value the property should be set to - * - * This functions sets a given property on a given object. This function only - * changes the software state of the property, it does not call into the - * driver's ->set_property callback. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_object_property_set_value(struct drm_mode_object *obj, - struct drm_property *property, uint64_t val) -{ - int i; - - for (i = 0; i < obj->properties->count; i++) { - if (obj->properties->properties[i] == property) { - obj->properties->values[i] = val; - return 0; - } - } - - return -EINVAL; -} -EXPORT_SYMBOL(drm_object_property_set_value); - -/** - * drm_object_property_get_value - retrieve the value of a property - * @obj: drm mode object to get property value from - * @property: property to retrieve - * @val: storage for the property value - * - * This function retrieves the softare state of the given property for the given - * property. Since there is no driver callback to retrieve the current property - * value this might be out of sync with the hardware, depending upon the driver - * and property. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_object_property_get_value(struct drm_mode_object *obj, - struct drm_property *property, uint64_t *val) -{ - int i; - - /* read-only properties bypass atomic mechanism and still store - * their value in obj->properties->values[].. mostly to avoid - * having to deal w/ EDID and similar props in atomic paths: - */ - if (drm_core_check_feature(property->dev, DRIVER_ATOMIC) && - !(property->flags & DRM_MODE_PROP_IMMUTABLE)) - return drm_atomic_get_property(obj, property, val); - - for (i = 0; i < obj->properties->count; i++) { - if (obj->properties->properties[i] == property) { - *val = obj->properties->values[i]; - return 0; - } - } - - return -EINVAL; -} -EXPORT_SYMBOL(drm_object_property_get_value); - -/** - * drm_mode_getproperty_ioctl - get the property metadata - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function retrieves the metadata for a given property, like the different - * possible values for an enum property or the limits for a range property. - * - * Blob properties are special - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getproperty_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_get_property *out_resp = data; - struct drm_property *property; - int enum_count = 0; - int value_count = 0; - int ret = 0, i; - int copied; - struct drm_property_enum *prop_enum; - struct drm_mode_property_enum __user *enum_ptr; - uint64_t __user *values_ptr; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - drm_modeset_lock_all(dev); - property = drm_property_find(dev, out_resp->prop_id); - if (!property) { - ret = -ENOENT; - goto done; - } - - if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) || - drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { - list_for_each_entry(prop_enum, &property->enum_list, head) - enum_count++; - } - - value_count = property->num_values; - - strncpy(out_resp->name, property->name, DRM_PROP_NAME_LEN); - out_resp->name[DRM_PROP_NAME_LEN-1] = 0; - out_resp->flags = property->flags; - - if ((out_resp->count_values >= value_count) && value_count) { - values_ptr = (uint64_t __user *)(unsigned long)out_resp->values_ptr; - for (i = 0; i < value_count; i++) { - if (copy_to_user(values_ptr + i, &property->values[i], sizeof(uint64_t))) { - ret = -EFAULT; - goto done; - } - } - } - out_resp->count_values = value_count; - - if (drm_property_type_is(property, DRM_MODE_PROP_ENUM) || - drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { - if ((out_resp->count_enum_blobs >= enum_count) && enum_count) { - copied = 0; - enum_ptr = (struct drm_mode_property_enum __user *)(unsigned long)out_resp->enum_blob_ptr; - list_for_each_entry(prop_enum, &property->enum_list, head) { - - if (copy_to_user(&enum_ptr[copied].value, &prop_enum->value, sizeof(uint64_t))) { - ret = -EFAULT; - goto done; - } - - if (copy_to_user(&enum_ptr[copied].name, - &prop_enum->name, DRM_PROP_NAME_LEN)) { - ret = -EFAULT; - goto done; - } - copied++; - } - } - out_resp->count_enum_blobs = enum_count; - } - - /* - * NOTE: The idea seems to have been to use this to read all the blob - * property values. But nothing ever added them to the corresponding - * list, userspace always used the special-purpose get_blob ioctl to - * read the value for a blob property. It also doesn't make a lot of - * sense to return values here when everything else is just metadata for - * the property itself. - */ - if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) - out_resp->count_enum_blobs = 0; -done: - drm_modeset_unlock_all(dev); - return ret; -} - -static void drm_property_free_blob(struct kref *kref) -{ - struct drm_property_blob *blob = - container_of(kref, struct drm_property_blob, base.refcount); - - mutex_lock(&blob->dev->mode_config.blob_lock); - list_del(&blob->head_global); - mutex_unlock(&blob->dev->mode_config.blob_lock); - - drm_mode_object_unregister(blob->dev, &blob->base); - - kfree(blob); -} - -/** - * drm_property_create_blob - Create new blob property - * - * Creates a new blob property for a specified DRM device, optionally - * copying data. - * - * @dev: DRM device to create property for - * @length: Length to allocate for blob data - * @data: If specified, copies data into blob - * - * Returns: - * New blob property with a single reference on success, or an ERR_PTR - * value on failure. - */ -struct drm_property_blob * -drm_property_create_blob(struct drm_device *dev, size_t length, - const void *data) -{ - struct drm_property_blob *blob; - int ret; - - if (!length || length > ULONG_MAX - sizeof(struct drm_property_blob)) - return ERR_PTR(-EINVAL); - - blob = kzalloc(sizeof(struct drm_property_blob)+length, GFP_KERNEL); - if (!blob) - return ERR_PTR(-ENOMEM); - - /* This must be explicitly initialised, so we can safely call list_del - * on it in the removal handler, even if it isn't in a file list. */ - INIT_LIST_HEAD(&blob->head_file); - blob->length = length; - blob->dev = dev; - - if (data) - memcpy(blob->data, data, length); - - ret = drm_mode_object_get_reg(dev, &blob->base, DRM_MODE_OBJECT_BLOB, - true, drm_property_free_blob); - if (ret) { - kfree(blob); - return ERR_PTR(-EINVAL); - } - - mutex_lock(&dev->mode_config.blob_lock); - list_add_tail(&blob->head_global, - &dev->mode_config.property_blob_list); - mutex_unlock(&dev->mode_config.blob_lock); - - return blob; -} -EXPORT_SYMBOL(drm_property_create_blob); - -/** - * drm_property_unreference_blob - Unreference a blob property - * - * Drop a reference on a blob property. May free the object. - * - * @blob: Pointer to blob property - */ -void drm_property_unreference_blob(struct drm_property_blob *blob) -{ - if (!blob) - return; - - drm_mode_object_unreference(&blob->base); -} -EXPORT_SYMBOL(drm_property_unreference_blob); - -/** - * drm_property_destroy_user_blobs - destroy all blobs created by this client - * @dev: DRM device - * @file_priv: destroy all blobs owned by this file handle - */ -void drm_property_destroy_user_blobs(struct drm_device *dev, - struct drm_file *file_priv) -{ - struct drm_property_blob *blob, *bt; - - /* - * When the file gets released that means no one else can access the - * blob list any more, so no need to grab dev->blob_lock. - */ - list_for_each_entry_safe(blob, bt, &file_priv->blobs, head_file) { - list_del_init(&blob->head_file); - drm_property_unreference_blob(blob); - } -} - -/** - * drm_property_reference_blob - Take a reference on an existing property - * - * Take a new reference on an existing blob property. - * - * @blob: Pointer to blob property - */ -struct drm_property_blob *drm_property_reference_blob(struct drm_property_blob *blob) -{ - drm_mode_object_reference(&blob->base); - return blob; -} -EXPORT_SYMBOL(drm_property_reference_blob); - -/** - * drm_property_lookup_blob - look up a blob property and take a reference - * @dev: drm device - * @id: id of the blob property - * - * If successful, this takes an additional reference to the blob property. - * callers need to make sure to eventually unreference the returned property - * again, using @drm_property_unreference_blob. - */ -struct drm_property_blob *drm_property_lookup_blob(struct drm_device *dev, - uint32_t id) -{ - struct drm_mode_object *obj; - struct drm_property_blob *blob = NULL; - - obj = _object_find(dev, id, DRM_MODE_OBJECT_BLOB); - if (obj) - blob = obj_to_blob(obj); - return blob; -} -EXPORT_SYMBOL(drm_property_lookup_blob); - -/** - * drm_property_replace_global_blob - atomically replace existing blob property - * @dev: drm device - * @replace: location of blob property pointer to be replaced - * @length: length of data for new blob, or 0 for no data - * @data: content for new blob, or NULL for no data - * @obj_holds_id: optional object for property holding blob ID - * @prop_holds_id: optional property holding blob ID - * @return 0 on success or error on failure - * - * This function will atomically replace a global property in the blob list, - * optionally updating a property which holds the ID of that property. It is - * guaranteed to be atomic: no caller will be allowed to see intermediate - * results, and either the entire operation will succeed and clean up the - * previous property, or it will fail and the state will be unchanged. - * - * If length is 0 or data is NULL, no new blob will be created, and the holding - * property, if specified, will be set to 0. - * - * Access to the replace pointer is assumed to be protected by the caller, e.g. - * by holding the relevant modesetting object lock for its parent. - * - * For example, a drm_connector has a 'PATH' property, which contains the ID - * of a blob property with the value of the MST path information. Calling this - * function with replace pointing to the connector's path_blob_ptr, length and - * data set for the new path information, obj_holds_id set to the connector's - * base object, and prop_holds_id set to the path property name, will perform - * a completely atomic update. The access to path_blob_ptr is protected by the - * caller holding a lock on the connector. - */ -static int drm_property_replace_global_blob(struct drm_device *dev, - struct drm_property_blob **replace, - size_t length, - const void *data, - struct drm_mode_object *obj_holds_id, - struct drm_property *prop_holds_id) -{ - struct drm_property_blob *new_blob = NULL; - struct drm_property_blob *old_blob = NULL; - int ret; - - WARN_ON(replace == NULL); - - old_blob = *replace; - - if (length && data) { - new_blob = drm_property_create_blob(dev, length, data); - if (IS_ERR(new_blob)) - return PTR_ERR(new_blob); - } - - /* This does not need to be synchronised with blob_lock, as the - * get_properties ioctl locks all modesetting objects, and - * obj_holds_id must be locked before calling here, so we cannot - * have its value out of sync with the list membership modified - * below under blob_lock. */ - if (obj_holds_id) { - ret = drm_object_property_set_value(obj_holds_id, - prop_holds_id, - new_blob ? - new_blob->base.id : 0); - if (ret != 0) - goto err_created; - } - - drm_property_unreference_blob(old_blob); - *replace = new_blob; - - return 0; - -err_created: - drm_property_unreference_blob(new_blob); - return ret; -} - -/** - * drm_mode_getblob_ioctl - get the contents of a blob property value - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function retrieves the contents of a blob property. The value stored in - * an object's blob property is just a normal modeset object id. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_getblob_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_get_blob *out_resp = data; - struct drm_property_blob *blob; - int ret = 0; - void __user *blob_ptr; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - blob = drm_property_lookup_blob(dev, out_resp->blob_id); - if (!blob) - return -ENOENT; - - if (out_resp->length == blob->length) { - blob_ptr = (void __user *)(unsigned long)out_resp->data; - if (copy_to_user(blob_ptr, blob->data, blob->length)) { - ret = -EFAULT; - goto unref; - } - } - out_resp->length = blob->length; -unref: - drm_property_unreference_blob(blob); - - return ret; -} - -/** - * drm_mode_createblob_ioctl - create a new blob property - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function creates a new blob property with user-defined values. In order - * to give us sensible validation and checking when creating, rather than at - * every potential use, we also require a type to be provided upfront. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_createblob_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_create_blob *out_resp = data; - struct drm_property_blob *blob; - void __user *blob_ptr; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - blob = drm_property_create_blob(dev, out_resp->length, NULL); - if (IS_ERR(blob)) - return PTR_ERR(blob); - - blob_ptr = (void __user *)(unsigned long)out_resp->data; - if (copy_from_user(blob->data, blob_ptr, out_resp->length)) { - ret = -EFAULT; - goto out_blob; - } - - /* Dropping the lock between create_blob and our access here is safe - * as only the same file_priv can remove the blob; at this point, it is - * not associated with any file_priv. */ - mutex_lock(&dev->mode_config.blob_lock); - out_resp->blob_id = blob->base.id; - list_add_tail(&blob->head_file, &file_priv->blobs); - mutex_unlock(&dev->mode_config.blob_lock); - - return 0; - -out_blob: - drm_property_unreference_blob(blob); - return ret; -} - -/** - * drm_mode_destroyblob_ioctl - destroy a user blob property - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * Destroy an existing user-defined blob property. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_destroyblob_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_destroy_blob *out_resp = data; - struct drm_property_blob *blob = NULL, *bt; - bool found = false; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - blob = drm_property_lookup_blob(dev, out_resp->blob_id); - if (!blob) - return -ENOENT; - - mutex_lock(&dev->mode_config.blob_lock); - /* Ensure the property was actually created by this user. */ - list_for_each_entry(bt, &file_priv->blobs, head_file) { - if (bt == blob) { - found = true; - break; - } - } - - if (!found) { - ret = -EPERM; - goto err; - } - - /* We must drop head_file here, because we may not be the last - * reference on the blob. */ - list_del_init(&blob->head_file); - mutex_unlock(&dev->mode_config.blob_lock); - - /* One reference from lookup, and one from the filp. */ - drm_property_unreference_blob(blob); - drm_property_unreference_blob(blob); - - return 0; - -err: - mutex_unlock(&dev->mode_config.blob_lock); - drm_property_unreference_blob(blob); - - return ret; -} - -/** - * drm_mode_connector_set_path_property - set tile property on connector - * @connector: connector to set property on. - * @path: path to use for property; must not be NULL. - * - * This creates a property to expose to userspace to specify a - * connector path. This is mainly used for DisplayPort MST where - * connectors have a topology and we want to allow userspace to give - * them more meaningful names. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_connector_set_path_property(struct drm_connector *connector, - const char *path) -{ - struct drm_device *dev = connector->dev; - int ret; - - ret = drm_property_replace_global_blob(dev, - &connector->path_blob_ptr, - strlen(path) + 1, - path, - &connector->base, - dev->mode_config.path_property); - return ret; -} -EXPORT_SYMBOL(drm_mode_connector_set_path_property); - -/** - * drm_mode_connector_set_tile_property - set tile property on connector - * @connector: connector to set property on. - * - * This looks up the tile information for a connector, and creates a - * property for userspace to parse if it exists. The property is of - * the form of 8 integers using ':' as a separator. - * - * Returns: - * Zero on success, errno on failure. - */ -int drm_mode_connector_set_tile_property(struct drm_connector *connector) -{ - struct drm_device *dev = connector->dev; - char tile[256]; - int ret; - - if (!connector->has_tile) { - ret = drm_property_replace_global_blob(dev, - &connector->tile_blob_ptr, - 0, - NULL, - &connector->base, - dev->mode_config.tile_property); - return ret; - } - - snprintf(tile, 256, "%d:%d:%d:%d:%d:%d:%d:%d", - connector->tile_group->id, connector->tile_is_single_monitor, - connector->num_h_tile, connector->num_v_tile, - connector->tile_h_loc, connector->tile_v_loc, - connector->tile_h_size, connector->tile_v_size); - - ret = drm_property_replace_global_blob(dev, - &connector->tile_blob_ptr, - strlen(tile) + 1, - tile, - &connector->base, - dev->mode_config.tile_property); - return ret; -} -EXPORT_SYMBOL(drm_mode_connector_set_tile_property); - -/** - * drm_mode_connector_update_edid_property - update the edid property of a connector - * @connector: drm connector - * @edid: new value of the edid property - * - * This function creates a new blob modeset object and assigns its id to the - * connector's edid property. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_connector_update_edid_property(struct drm_connector *connector, - const struct edid *edid) -{ - struct drm_device *dev = connector->dev; - size_t size = 0; - int ret; - - /* ignore requests to set edid when overridden */ - if (connector->override_edid) - return 0; - - if (edid) - size = EDID_LENGTH * (1 + edid->extensions); - - ret = drm_property_replace_global_blob(dev, - &connector->edid_blob_ptr, - size, - edid, - &connector->base, - dev->mode_config.edid_property); - return ret; -} -EXPORT_SYMBOL(drm_mode_connector_update_edid_property); - -/* Some properties could refer to dynamic refcnt'd objects, or things that - * need special locking to handle lifetime issues (ie. to ensure the prop - * value doesn't become invalid part way through the property update due to - * race). The value returned by reference via 'obj' should be passed back - * to drm_property_change_valid_put() after the property is set (and the - * object to which the property is attached has a chance to take it's own - * reference). - */ -bool drm_property_change_valid_get(struct drm_property *property, - uint64_t value, struct drm_mode_object **ref) -{ - int i; - - if (property->flags & DRM_MODE_PROP_IMMUTABLE) - return false; - - *ref = NULL; - - if (drm_property_type_is(property, DRM_MODE_PROP_RANGE)) { - if (value < property->values[0] || value > property->values[1]) - return false; - return true; - } else if (drm_property_type_is(property, DRM_MODE_PROP_SIGNED_RANGE)) { - int64_t svalue = U642I64(value); - - if (svalue < U642I64(property->values[0]) || - svalue > U642I64(property->values[1])) - return false; - return true; - } else if (drm_property_type_is(property, DRM_MODE_PROP_BITMASK)) { - uint64_t valid_mask = 0; - - for (i = 0; i < property->num_values; i++) - valid_mask |= (1ULL << property->values[i]); - return !(value & ~valid_mask); - } else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) { - struct drm_property_blob *blob; - - if (value == 0) - return true; - - blob = drm_property_lookup_blob(property->dev, value); - if (blob) { - *ref = &blob->base; - return true; - } else { - return false; - } - } else if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) { - /* a zero value for an object property translates to null: */ - if (value == 0) - return true; - - *ref = _object_find(property->dev, value, property->values[0]); - return *ref != NULL; - } - - for (i = 0; i < property->num_values; i++) - if (property->values[i] == value) - return true; - return false; -} - -void drm_property_change_valid_put(struct drm_property *property, - struct drm_mode_object *ref) -{ - if (!ref) - return; - - if (drm_property_type_is(property, DRM_MODE_PROP_OBJECT)) { - drm_mode_object_unreference(ref); - } else if (drm_property_type_is(property, DRM_MODE_PROP_BLOB)) - drm_property_unreference_blob(obj_to_blob(ref)); -} - -/** - * drm_mode_connector_property_set_ioctl - set the current value of a connector property - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function sets the current value for a connectors's property. It also - * calls into a driver's ->set_property callback to update the hardware state - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_connector_property_set_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_connector_set_property *conn_set_prop = data; - struct drm_mode_obj_set_property obj_set_prop = { - .value = conn_set_prop->value, - .prop_id = conn_set_prop->prop_id, - .obj_id = conn_set_prop->connector_id, - .obj_type = DRM_MODE_OBJECT_CONNECTOR - }; - - /* It does all the locking and checking we need */ - return drm_mode_obj_set_property_ioctl(dev, &obj_set_prop, file_priv); -} - -static int drm_mode_connector_set_obj_prop(struct drm_mode_object *obj, - struct drm_property *property, - uint64_t value) -{ - int ret = -EINVAL; - struct drm_connector *connector = obj_to_connector(obj); - - /* Do DPMS ourselves */ - if (property == connector->dev->mode_config.dpms_property) { - ret = (*connector->funcs->dpms)(connector, (int)value); - } else if (connector->funcs->set_property) - ret = connector->funcs->set_property(connector, property, value); - - /* store the property value if successful */ - if (!ret) - drm_object_property_set_value(&connector->base, property, value); - return ret; -} - -static int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, - struct drm_property *property, - uint64_t value) +int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, + struct drm_property *property, + uint64_t value) { int ret = -EINVAL; struct drm_crtc *crtc = obj_to_crtc(obj); @@ -5004,497 +904,6 @@ static int drm_mode_crtc_set_obj_prop(struct drm_mode_object *obj, } /** - * drm_mode_plane_set_obj_prop - set the value of a property - * @plane: drm plane object to set property value for - * @property: property to set - * @value: value the property should be set to - * - * This functions sets a given property on a given plane object. This function - * calls the driver's ->set_property callback and changes the software state of - * the property if the callback succeeds. - * - * Returns: - * Zero on success, error code on failure. - */ -int drm_mode_plane_set_obj_prop(struct drm_plane *plane, - struct drm_property *property, - uint64_t value) -{ - int ret = -EINVAL; - struct drm_mode_object *obj = &plane->base; - - if (plane->funcs->set_property) - ret = plane->funcs->set_property(plane, property, value); - if (!ret) - drm_object_property_set_value(obj, property, value); - - return ret; -} -EXPORT_SYMBOL(drm_mode_plane_set_obj_prop); - -/** - * drm_mode_obj_get_properties_ioctl - get the current value of a object's property - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function retrieves the current value for an object's property. Compared - * to the connector specific ioctl this one is extended to also work on crtc and - * plane objects. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_obj_get_properties_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_obj_get_properties *arg = data; - struct drm_mode_object *obj; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - drm_modeset_lock_all(dev); - - obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type); - if (!obj) { - ret = -ENOENT; - goto out; - } - if (!obj->properties) { - ret = -EINVAL; - goto out_unref; - } - - ret = get_properties(obj, file_priv->atomic, - (uint32_t __user *)(unsigned long)(arg->props_ptr), - (uint64_t __user *)(unsigned long)(arg->prop_values_ptr), - &arg->count_props); - -out_unref: - drm_mode_object_unreference(obj); -out: - drm_modeset_unlock_all(dev); - return ret; -} - -/** - * drm_mode_obj_set_property_ioctl - set the current value of an object's property - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This function sets the current value for an object's property. It also calls - * into a driver's ->set_property callback to update the hardware state. - * Compared to the connector specific ioctl this one is extended to also work on - * crtc and plane objects. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_obj_set_property_ioctl(struct drm_device *dev, void *data, - struct drm_file *file_priv) -{ - struct drm_mode_obj_set_property *arg = data; - struct drm_mode_object *arg_obj; - struct drm_mode_object *prop_obj; - struct drm_property *property; - int i, ret = -EINVAL; - struct drm_mode_object *ref; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - drm_modeset_lock_all(dev); - - arg_obj = drm_mode_object_find(dev, arg->obj_id, arg->obj_type); - if (!arg_obj) { - ret = -ENOENT; - goto out; - } - if (!arg_obj->properties) - goto out_unref; - - for (i = 0; i < arg_obj->properties->count; i++) - if (arg_obj->properties->properties[i]->base.id == arg->prop_id) - break; - - if (i == arg_obj->properties->count) - goto out_unref; - - prop_obj = drm_mode_object_find(dev, arg->prop_id, - DRM_MODE_OBJECT_PROPERTY); - if (!prop_obj) { - ret = -ENOENT; - goto out_unref; - } - property = obj_to_property(prop_obj); - - if (!drm_property_change_valid_get(property, arg->value, &ref)) - goto out_unref; - - switch (arg_obj->type) { - case DRM_MODE_OBJECT_CONNECTOR: - ret = drm_mode_connector_set_obj_prop(arg_obj, property, - arg->value); - break; - case DRM_MODE_OBJECT_CRTC: - ret = drm_mode_crtc_set_obj_prop(arg_obj, property, arg->value); - break; - case DRM_MODE_OBJECT_PLANE: - ret = drm_mode_plane_set_obj_prop(obj_to_plane(arg_obj), - property, arg->value); - break; - } - - drm_property_change_valid_put(property, ref); - -out_unref: - drm_mode_object_unreference(arg_obj); -out: - drm_modeset_unlock_all(dev); - return ret; -} - -/** - * drm_mode_connector_attach_encoder - attach a connector to an encoder - * @connector: connector to attach - * @encoder: encoder to attach @connector to - * - * This function links up a connector to an encoder. Note that the routing - * restrictions between encoders and crtcs are exposed to userspace through the - * possible_clones and possible_crtcs bitmasks. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_connector_attach_encoder(struct drm_connector *connector, - struct drm_encoder *encoder) -{ - int i; - - /* - * In the past, drivers have attempted to model the static association - * of connector to encoder in simple connector/encoder devices using a - * direct assignment of connector->encoder = encoder. This connection - * is a logical one and the responsibility of the core, so drivers are - * expected not to mess with this. - * - * Note that the error return should've been enough here, but a large - * majority of drivers ignores the return value, so add in a big WARN - * to get people's attention. - */ - if (WARN_ON(connector->encoder)) - return -EINVAL; - - for (i = 0; i < DRM_CONNECTOR_MAX_ENCODER; i++) { - if (connector->encoder_ids[i] == 0) { - connector->encoder_ids[i] = encoder->base.id; - return 0; - } - } - return -ENOMEM; -} -EXPORT_SYMBOL(drm_mode_connector_attach_encoder); - -/** - * drm_mode_crtc_set_gamma_size - set the gamma table size - * @crtc: CRTC to set the gamma table size for - * @gamma_size: size of the gamma table - * - * Drivers which support gamma tables should set this to the supported gamma - * table size when initializing the CRTC. Currently the drm core only supports a - * fixed gamma table size. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_crtc_set_gamma_size(struct drm_crtc *crtc, - int gamma_size) -{ - uint16_t *r_base, *g_base, *b_base; - int i; - - crtc->gamma_size = gamma_size; - - crtc->gamma_store = kcalloc(gamma_size, sizeof(uint16_t) * 3, - GFP_KERNEL); - if (!crtc->gamma_store) { - crtc->gamma_size = 0; - return -ENOMEM; - } - - r_base = crtc->gamma_store; - g_base = r_base + gamma_size; - b_base = g_base + gamma_size; - for (i = 0; i < gamma_size; i++) { - r_base[i] = i << 8; - g_base[i] = i << 8; - b_base[i] = i << 8; - } - - - return 0; -} -EXPORT_SYMBOL(drm_mode_crtc_set_gamma_size); - -/** - * drm_mode_gamma_set_ioctl - set the gamma table - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * Set the gamma table of a CRTC to the one passed in by the user. Userspace can - * inquire the required gamma table size through drm_mode_gamma_get_ioctl. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_gamma_set_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_crtc_lut *crtc_lut = data; - struct drm_crtc *crtc; - void *r_base, *g_base, *b_base; - int size; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - drm_modeset_lock_all(dev); - crtc = drm_crtc_find(dev, crtc_lut->crtc_id); - if (!crtc) { - ret = -ENOENT; - goto out; - } - - if (crtc->funcs->gamma_set == NULL) { - ret = -ENOSYS; - goto out; - } - - /* memcpy into gamma store */ - if (crtc_lut->gamma_size != crtc->gamma_size) { - ret = -EINVAL; - goto out; - } - - size = crtc_lut->gamma_size * (sizeof(uint16_t)); - r_base = crtc->gamma_store; - if (copy_from_user(r_base, (void __user *)(unsigned long)crtc_lut->red, size)) { - ret = -EFAULT; - goto out; - } - - g_base = r_base + size; - if (copy_from_user(g_base, (void __user *)(unsigned long)crtc_lut->green, size)) { - ret = -EFAULT; - goto out; - } - - b_base = g_base + size; - if (copy_from_user(b_base, (void __user *)(unsigned long)crtc_lut->blue, size)) { - ret = -EFAULT; - goto out; - } - - ret = crtc->funcs->gamma_set(crtc, r_base, g_base, b_base, crtc->gamma_size); - -out: - drm_modeset_unlock_all(dev); - return ret; - -} - -/** - * drm_mode_gamma_get_ioctl - get the gamma table - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * Copy the current gamma table into the storage provided. This also provides - * the gamma table size the driver expects, which can be used to size the - * allocated storage. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_gamma_get_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_crtc_lut *crtc_lut = data; - struct drm_crtc *crtc; - void *r_base, *g_base, *b_base; - int size; - int ret = 0; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - drm_modeset_lock_all(dev); - crtc = drm_crtc_find(dev, crtc_lut->crtc_id); - if (!crtc) { - ret = -ENOENT; - goto out; - } - - /* memcpy into gamma store */ - if (crtc_lut->gamma_size != crtc->gamma_size) { - ret = -EINVAL; - goto out; - } - - size = crtc_lut->gamma_size * (sizeof(uint16_t)); - r_base = crtc->gamma_store; - if (copy_to_user((void __user *)(unsigned long)crtc_lut->red, r_base, size)) { - ret = -EFAULT; - goto out; - } - - g_base = r_base + size; - if (copy_to_user((void __user *)(unsigned long)crtc_lut->green, g_base, size)) { - ret = -EFAULT; - goto out; - } - - b_base = g_base + size; - if (copy_to_user((void __user *)(unsigned long)crtc_lut->blue, b_base, size)) { - ret = -EFAULT; - goto out; - } -out: - drm_modeset_unlock_all(dev); - return ret; -} - -/** - * drm_mode_page_flip_ioctl - schedule an asynchronous fb update - * @dev: DRM device - * @data: ioctl data - * @file_priv: DRM file info - * - * This schedules an asynchronous update on a given CRTC, called page flip. - * Optionally a drm event is generated to signal the completion of the event. - * Generic drivers cannot assume that a pageflip with changed framebuffer - * properties (including driver specific metadata like tiling layout) will work, - * but some drivers support e.g. pixel format changes through the pageflip - * ioctl. - * - * Called by the user via ioctl. - * - * Returns: - * Zero on success, negative errno on failure. - */ -int drm_mode_page_flip_ioctl(struct drm_device *dev, - void *data, struct drm_file *file_priv) -{ - struct drm_mode_crtc_page_flip *page_flip = data; - struct drm_crtc *crtc; - struct drm_framebuffer *fb = NULL; - struct drm_pending_vblank_event *e = NULL; - int ret = -EINVAL; - - if (!drm_core_check_feature(dev, DRIVER_MODESET)) - return -EINVAL; - - if (page_flip->flags & ~DRM_MODE_PAGE_FLIP_FLAGS || - page_flip->reserved != 0) - return -EINVAL; - - if ((page_flip->flags & DRM_MODE_PAGE_FLIP_ASYNC) && !dev->mode_config.async_page_flip) - return -EINVAL; - - crtc = drm_crtc_find(dev, page_flip->crtc_id); - if (!crtc) - return -ENOENT; - - drm_modeset_lock_crtc(crtc, crtc->primary); - if (crtc->primary->fb == NULL) { - /* The framebuffer is currently unbound, presumably - * due to a hotplug event, that userspace has not - * yet discovered. - */ - ret = -EBUSY; - goto out; - } - - if (crtc->funcs->page_flip == NULL) - goto out; - - fb = drm_framebuffer_lookup(dev, page_flip->fb_id); - if (!fb) { - ret = -ENOENT; - goto out; - } - - if (crtc->state) { - const struct drm_plane_state *state = crtc->primary->state; - - ret = check_src_coords(state->src_x, state->src_y, - state->src_w, state->src_h, fb); - } else { - ret = drm_crtc_check_viewport(crtc, crtc->x, crtc->y, &crtc->mode, fb); - } - if (ret) - goto out; - - if (crtc->primary->fb->pixel_format != fb->pixel_format) { - DRM_DEBUG_KMS("Page flip is not allowed to change frame buffer format.\n"); - ret = -EINVAL; - goto out; - } - - if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) { - e = kzalloc(sizeof *e, GFP_KERNEL); - if (!e) { - ret = -ENOMEM; - goto out; - } - e->event.base.type = DRM_EVENT_FLIP_COMPLETE; - e->event.base.length = sizeof(e->event); - e->event.user_data = page_flip->user_data; - ret = drm_event_reserve_init(dev, file_priv, &e->base, &e->event.base); - if (ret) { - kfree(e); - goto out; - } - } - - crtc->primary->old_fb = crtc->primary->fb; - ret = crtc->funcs->page_flip(crtc, fb, e, page_flip->flags); - if (ret) { - if (page_flip->flags & DRM_MODE_PAGE_FLIP_EVENT) - drm_event_cancel_free(dev, &e->base); - /* Keep the old fb, don't unref it. */ - crtc->primary->old_fb = NULL; - } else { - crtc->primary->fb = fb; - /* Unref only the old framebuffer. */ - fb = NULL; - } - -out: - if (fb) - drm_framebuffer_unreference(fb); - if (crtc->primary->old_fb) - drm_framebuffer_unreference(crtc->primary->old_fb); - crtc->primary->old_fb = NULL; - drm_modeset_unlock_crtc(crtc); - - return ret; -} - -/** * drm_mode_config_reset - call ->reset callbacks * @dev: drm device * @@ -5639,37 +1048,6 @@ int drm_mode_destroy_dumb_ioctl(struct drm_device *dev, } /** - * drm_rotation_simplify() - Try to simplify the rotation - * @rotation: Rotation to be simplified - * @supported_rotations: Supported rotations - * - * Attempt to simplify the rotation to a form that is supported. - * Eg. if the hardware supports everything except DRM_REFLECT_X - * one could call this function like this: - * - * drm_rotation_simplify(rotation, BIT(DRM_ROTATE_0) | - * BIT(DRM_ROTATE_90) | BIT(DRM_ROTATE_180) | - * BIT(DRM_ROTATE_270) | BIT(DRM_REFLECT_Y)); - * - * to eliminate the DRM_ROTATE_X flag. Depending on what kind of - * transforms the hardware supports, this function may not - * be able to produce a supported transform, so the caller should - * check the result afterwards. - */ -unsigned int drm_rotation_simplify(unsigned int rotation, - unsigned int supported_rotations) -{ - if (rotation & ~supported_rotations) { - rotation ^= BIT(DRM_REFLECT_X) | BIT(DRM_REFLECT_Y); - rotation = (rotation & DRM_REFLECT_MASK) | - BIT((ffs(rotation & DRM_ROTATE_MASK) + 1) % 4); - } - - return rotation; -} -EXPORT_SYMBOL(drm_rotation_simplify); - -/** * drm_mode_config_init - initialize DRM mode_configuration structure * @dev: DRM device * @@ -5785,24 +1163,6 @@ void drm_mode_config_cleanup(struct drm_device *dev) } EXPORT_SYMBOL(drm_mode_config_cleanup); -struct drm_property *drm_mode_create_rotation_property(struct drm_device *dev, - unsigned int supported_rotations) -{ - static const struct drm_prop_enum_list props[] = { - { DRM_ROTATE_0, "rotate-0" }, - { DRM_ROTATE_90, "rotate-90" }, - { DRM_ROTATE_180, "rotate-180" }, - { DRM_ROTATE_270, "rotate-270" }, - { DRM_REFLECT_X, "reflect-x" }, - { DRM_REFLECT_Y, "reflect-y" }, - }; - - return drm_property_create_bitmask(dev, 0, "rotation", - props, ARRAY_SIZE(props), - supported_rotations); -} -EXPORT_SYMBOL(drm_mode_create_rotation_property); - /** * DOC: Tile group * @@ -5901,48 +1261,3 @@ struct drm_tile_group *drm_mode_create_tile_group(struct drm_device *dev, return tg; } EXPORT_SYMBOL(drm_mode_create_tile_group); - -/** - * drm_crtc_enable_color_mgmt - enable color management properties - * @crtc: DRM CRTC - * @degamma_lut_size: the size of the degamma lut (before CSC) - * @has_ctm: whether to attach ctm_property for CSC matrix - * @gamma_lut_size: the size of the gamma lut (after CSC) - * - * This function lets the driver enable the color correction - * properties on a CRTC. This includes 3 degamma, csc and gamma - * properties that userspace can set and 2 size properties to inform - * the userspace of the lut sizes. Each of the properties are - * optional. The gamma and degamma properties are only attached if - * their size is not 0 and ctm_property is only attached if has_ctm is - * true. - */ -void drm_crtc_enable_color_mgmt(struct drm_crtc *crtc, - uint degamma_lut_size, - bool has_ctm, - uint gamma_lut_size) -{ - struct drm_device *dev = crtc->dev; - struct drm_mode_config *config = &dev->mode_config; - - if (degamma_lut_size) { - drm_object_attach_property(&crtc->base, - config->degamma_lut_property, 0); - drm_object_attach_property(&crtc->base, - config->degamma_lut_size_property, - degamma_lut_size); - } - - if (has_ctm) - drm_object_attach_property(&crtc->base, - config->ctm_property, 0); - - if (gamma_lut_size) { - drm_object_attach_property(&crtc->base, - config->gamma_lut_property, 0); - drm_object_attach_property(&crtc->base, - config->gamma_lut_size_property, - gamma_lut_size); - } -} -EXPORT_SYMBOL(drm_crtc_enable_color_mgmt); |