diff options
Diffstat (limited to 'drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c')
-rw-r--r-- | drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c | 166 |
1 files changed, 166 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c b/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c new file mode 100644 index 000000000000..5528224448f6 --- /dev/null +++ b/drivers/gpu/drm/i915/gt/uc/intel_guc_fw.c @@ -0,0 +1,166 @@ +// SPDX-License-Identifier: MIT +/* + * Copyright © 2014-2019 Intel Corporation + * + * Authors: + * Vinit Azad <vinit.azad@intel.com> + * Ben Widawsky <ben@bwidawsk.net> + * Dave Gordon <david.s.gordon@intel.com> + * Alex Dai <yu.dai@intel.com> + */ + +#include "gt/intel_gt.h" +#include "intel_guc_fw.h" +#include "i915_drv.h" + +/** + * intel_guc_fw_init_early() - initializes GuC firmware struct + * @guc: intel_guc struct + * + * On platforms with GuC selects firmware for uploading + */ +void intel_guc_fw_init_early(struct intel_guc *guc) +{ + struct drm_i915_private *i915 = guc_to_gt(guc)->i915; + + intel_uc_fw_init_early(&guc->fw, INTEL_UC_FW_TYPE_GUC, HAS_GT_UC(i915), + INTEL_INFO(i915)->platform, INTEL_REVID(i915)); +} + +static void guc_prepare_xfer(struct intel_uncore *uncore) +{ + u32 shim_flags = GUC_DISABLE_SRAM_INIT_TO_ZEROES | + GUC_ENABLE_READ_CACHE_LOGIC | + GUC_ENABLE_MIA_CACHING | + GUC_ENABLE_READ_CACHE_FOR_SRAM_DATA | + GUC_ENABLE_READ_CACHE_FOR_WOPCM_DATA | + GUC_ENABLE_MIA_CLOCK_GATING; + + /* Must program this register before loading the ucode with DMA */ + intel_uncore_write(uncore, GUC_SHIM_CONTROL, shim_flags); + + if (IS_GEN9_LP(uncore->i915)) + intel_uncore_write(uncore, GEN9LP_GT_PM_CONFIG, GT_DOORBELL_ENABLE); + else + intel_uncore_write(uncore, GEN9_GT_PM_CONFIG, GT_DOORBELL_ENABLE); + + if (IS_GEN(uncore->i915, 9)) { + /* DOP Clock Gating Enable for GuC clocks */ + intel_uncore_rmw(uncore, GEN7_MISCCPCTL, + 0, GEN8_DOP_CLOCK_GATE_GUC_ENABLE); + + /* allows for 5us (in 10ns units) before GT can go to RC6 */ + intel_uncore_write(uncore, GUC_ARAT_C6DIS, 0x1FF); + } +} + +/* Copy RSA signature from the fw image to HW for verification */ +static void guc_xfer_rsa(struct intel_uc_fw *guc_fw, + struct intel_uncore *uncore) +{ + u32 rsa[UOS_RSA_SCRATCH_COUNT]; + size_t copied; + int i; + + copied = intel_uc_fw_copy_rsa(guc_fw, rsa, sizeof(rsa)); + GEM_BUG_ON(copied < sizeof(rsa)); + + for (i = 0; i < UOS_RSA_SCRATCH_COUNT; i++) + intel_uncore_write(uncore, UOS_RSA_SCRATCH(i), rsa[i]); +} + +/* + * Read the GuC status register (GUC_STATUS) and store it in the + * specified location; then return a boolean indicating whether + * the value matches either of two values representing completion + * of the GuC boot process. + * + * This is used for polling the GuC status in a wait_for() + * loop below. + */ +static inline bool guc_ready(struct intel_uncore *uncore, u32 *status) +{ + u32 val = intel_uncore_read(uncore, GUC_STATUS); + u32 uk_val = val & GS_UKERNEL_MASK; + + *status = val; + return (uk_val == GS_UKERNEL_READY) || + ((val & GS_MIA_CORE_STATE) && (uk_val == GS_UKERNEL_LAPIC_DONE)); +} + +static int guc_wait_ucode(struct intel_uncore *uncore) +{ + u32 status; + int ret; + + /* + * Wait for the GuC to start up. + * NB: Docs recommend not using the interrupt for completion. + * Measurements indicate this should take no more than 20ms, so a + * timeout here indicates that the GuC has failed and is unusable. + * (Higher levels of the driver may decide to reset the GuC and + * attempt the ucode load again if this happens.) + */ + ret = wait_for(guc_ready(uncore, &status), 100); + DRM_DEBUG_DRIVER("GuC status %#x\n", status); + + if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) { + DRM_ERROR("GuC firmware signature verification failed\n"); + ret = -ENOEXEC; + } + + if ((status & GS_UKERNEL_MASK) == GS_UKERNEL_EXCEPTION) { + DRM_ERROR("GuC firmware exception. EIP: %#x\n", + intel_uncore_read(uncore, SOFT_SCRATCH(13))); + ret = -ENXIO; + } + + return ret; +} + +/** + * intel_guc_fw_upload() - load GuC uCode to device + * @guc: intel_guc structure + * + * Called from intel_uc_init_hw() during driver load, resume from sleep and + * after a GPU reset. + * + * The firmware image should have already been fetched into memory, so only + * check that fetch succeeded, and then transfer the image to the h/w. + * + * Return: non-zero code on error + */ +int intel_guc_fw_upload(struct intel_guc *guc) +{ + struct intel_gt *gt = guc_to_gt(guc); + struct intel_uncore *uncore = gt->uncore; + int ret; + + guc_prepare_xfer(uncore); + + /* + * Note that GuC needs the CSS header plus uKernel code to be copied + * by the DMA engine in one operation, whereas the RSA signature is + * loaded via MMIO. + */ + guc_xfer_rsa(&guc->fw, uncore); + + /* + * Current uCode expects the code to be loaded at 8k; locations below + * this are used for the stack. + */ + ret = intel_uc_fw_upload(&guc->fw, gt, 0x2000, UOS_MOVE); + if (ret) + goto out; + + ret = guc_wait_ucode(uncore); + if (ret) + goto out; + + intel_uc_fw_change_status(&guc->fw, INTEL_UC_FIRMWARE_RUNNING); + return 0; + +out: + intel_uc_fw_change_status(&guc->fw, INTEL_UC_FIRMWARE_FAIL); + return ret; +} |