diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_display.c')
| -rw-r--r-- | drivers/gpu/drm/i915/intel_display.c | 226 |
1 files changed, 223 insertions, 3 deletions
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c index bb5f2a570a1d..5ee5d8cd9cd1 100644 --- a/drivers/gpu/drm/i915/intel_display.c +++ b/drivers/gpu/drm/i915/intel_display.c @@ -5196,6 +5196,181 @@ static void modeset_update_crtc_power_domains(struct drm_atomic_state *state) intel_display_set_init_power(dev_priv, false); } +void broxton_set_cdclk(struct drm_device *dev, int frequency) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t divider; + uint32_t ratio; + uint32_t current_freq; + int ret; + + /* frequency = 19.2MHz * ratio / 2 / div{1,1.5,2,4} */ + switch (frequency) { + case 144000: + divider = BXT_CDCLK_CD2X_DIV_SEL_4; + ratio = BXT_DE_PLL_RATIO(60); + break; + case 288000: + divider = BXT_CDCLK_CD2X_DIV_SEL_2; + ratio = BXT_DE_PLL_RATIO(60); + break; + case 384000: + divider = BXT_CDCLK_CD2X_DIV_SEL_1_5; + ratio = BXT_DE_PLL_RATIO(60); + break; + case 576000: + divider = BXT_CDCLK_CD2X_DIV_SEL_1; + ratio = BXT_DE_PLL_RATIO(60); + break; + case 624000: + divider = BXT_CDCLK_CD2X_DIV_SEL_1; + ratio = BXT_DE_PLL_RATIO(65); + break; + case 19200: + /* + * Bypass frequency with DE PLL disabled. Init ratio, divider + * to suppress GCC warning. + */ + ratio = 0; + divider = 0; + break; + default: + DRM_ERROR("unsupported CDCLK freq %d", frequency); + + return; + } + + mutex_lock(&dev_priv->rps.hw_lock); + /* Inform power controller of upcoming frequency change */ + ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, + 0x80000000); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret) { + DRM_ERROR("PCode CDCLK freq change notify failed (err %d, freq %d)\n", + ret, frequency); + return; + } + + current_freq = I915_READ(CDCLK_CTL) & CDCLK_FREQ_DECIMAL_MASK; + /* convert from .1 fixpoint MHz with -1MHz offset to kHz */ + current_freq = current_freq * 500 + 1000; + + /* + * DE PLL has to be disabled when + * - setting to 19.2MHz (bypass, PLL isn't used) + * - before setting to 624MHz (PLL needs toggling) + * - before setting to any frequency from 624MHz (PLL needs toggling) + */ + if (frequency == 19200 || frequency == 624000 || + current_freq == 624000) { + I915_WRITE(BXT_DE_PLL_ENABLE, ~BXT_DE_PLL_PLL_ENABLE); + /* Timeout 200us */ + if (wait_for(!(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK), + 1)) + DRM_ERROR("timout waiting for DE PLL unlock\n"); + } + + if (frequency != 19200) { + uint32_t val; + + val = I915_READ(BXT_DE_PLL_CTL); + val &= ~BXT_DE_PLL_RATIO_MASK; + val |= ratio; + I915_WRITE(BXT_DE_PLL_CTL, val); + + I915_WRITE(BXT_DE_PLL_ENABLE, BXT_DE_PLL_PLL_ENABLE); + /* Timeout 200us */ + if (wait_for(I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_LOCK, 1)) + DRM_ERROR("timeout waiting for DE PLL lock\n"); + + val = I915_READ(CDCLK_CTL); + val &= ~BXT_CDCLK_CD2X_DIV_SEL_MASK; + val |= divider; + /* + * Disable SSA Precharge when CD clock frequency < 500 MHz, + * enable otherwise. + */ + val &= ~BXT_CDCLK_SSA_PRECHARGE_ENABLE; + if (frequency >= 500000) + val |= BXT_CDCLK_SSA_PRECHARGE_ENABLE; + + val &= ~CDCLK_FREQ_DECIMAL_MASK; + /* convert from kHz to .1 fixpoint MHz with -1MHz offset */ + val |= (frequency - 1000) / 500; + I915_WRITE(CDCLK_CTL, val); + } + + mutex_lock(&dev_priv->rps.hw_lock); + ret = sandybridge_pcode_write(dev_priv, HSW_PCODE_DE_WRITE_FREQ_REQ, + DIV_ROUND_UP(frequency, 25000)); + mutex_unlock(&dev_priv->rps.hw_lock); + + if (ret) { + DRM_ERROR("PCode CDCLK freq set failed, (err %d, freq %d)\n", + ret, frequency); + return; + } + + dev_priv->cdclk_freq = frequency; +} + +void broxton_init_cdclk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + uint32_t val; + + /* + * NDE_RSTWRN_OPT RST PCH Handshake En must always be 0b on BXT + * or else the reset will hang because there is no PCH to respond. + * Move the handshake programming to initialization sequence. + * Previously was left up to BIOS. + */ + val = I915_READ(HSW_NDE_RSTWRN_OPT); + val &= ~RESET_PCH_HANDSHAKE_ENABLE; + I915_WRITE(HSW_NDE_RSTWRN_OPT, val); + + /* Enable PG1 for cdclk */ + intel_display_power_get(dev_priv, POWER_DOMAIN_PLLS); + + /* check if cd clock is enabled */ + if (I915_READ(BXT_DE_PLL_ENABLE) & BXT_DE_PLL_PLL_ENABLE) { + DRM_DEBUG_KMS("Display already initialized\n"); + return; + } + + /* + * FIXME: + * - The initial CDCLK needs to be read from VBT. + * Need to make this change after VBT has changes for BXT. + * - check if setting the max (or any) cdclk freq is really necessary + * here, it belongs to modeset time + */ + broxton_set_cdclk(dev, 624000); + + I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) | DBUF_POWER_REQUEST); + udelay(10); + + if (!(I915_READ(DBUF_CTL) & DBUF_POWER_STATE)) + DRM_ERROR("DBuf power enable timeout!\n"); +} + +void broxton_uninit_cdclk(struct drm_device *dev) +{ + struct drm_i915_private *dev_priv = dev->dev_private; + + I915_WRITE(DBUF_CTL, I915_READ(DBUF_CTL) & ~DBUF_POWER_REQUEST); + udelay(10); + + if (I915_READ(DBUF_CTL) & DBUF_POWER_STATE) + DRM_ERROR("DBuf power disable timeout!\n"); + + /* Set minimum (bypass) frequency, in effect turning off the DE PLL */ + broxton_set_cdclk(dev, 19200); + + intel_display_power_put(dev_priv, POWER_DOMAIN_PLLS); +} + /* returns HPLL frequency in kHz */ static int valleyview_get_vco(struct drm_i915_private *dev_priv) { @@ -5363,6 +5538,26 @@ static int valleyview_calc_cdclk(struct drm_i915_private *dev_priv, return 200000; } +static int broxton_calc_cdclk(struct drm_i915_private *dev_priv, + int max_pixclk) +{ + /* + * FIXME: + * - remove the guardband, it's not needed on BXT + * - set 19.2MHz bypass frequency if there are no active pipes + */ + if (max_pixclk > 576000*9/10) + return 624000; + else if (max_pixclk > 384000*9/10) + return 576000; + else if (max_pixclk > 288000*9/10) + return 384000; + else if (max_pixclk > 144000*9/10) + return 288000; + else + return 144000; +} + /* compute the max pixel clock for new configuration */ static int intel_mode_max_pixclk(struct drm_atomic_state *state) { @@ -5392,12 +5587,17 @@ static int valleyview_modeset_global_pipes(struct drm_atomic_state *state, struct drm_i915_private *dev_priv = to_i915(state->dev); struct intel_crtc *intel_crtc; int max_pixclk = intel_mode_max_pixclk(state); + int cdclk; if (max_pixclk < 0) return max_pixclk; - if (valleyview_calc_cdclk(dev_priv, max_pixclk) == - dev_priv->cdclk_freq) + if (IS_VALLEYVIEW(dev_priv)) + cdclk = valleyview_calc_cdclk(dev_priv, max_pixclk); + else + cdclk = broxton_calc_cdclk(dev_priv, max_pixclk); + + if (cdclk == dev_priv->cdclk_freq) return 0; /* disable/enable all currently active pipes while we change cdclk */ @@ -8827,6 +9027,23 @@ void hsw_disable_pc8(struct drm_i915_private *dev_priv) intel_prepare_ddi(dev); } +static void broxton_modeset_global_resources(struct drm_atomic_state *state) +{ + struct drm_device *dev = state->dev; + struct drm_i915_private *dev_priv = dev->dev_private; + int max_pixclk = intel_mode_max_pixclk(state); + int req_cdclk; + + /* see the comment in valleyview_modeset_global_resources */ + if (WARN_ON(max_pixclk < 0)) + return; + + req_cdclk = broxton_calc_cdclk(dev_priv, max_pixclk); + + if (req_cdclk != dev_priv->cdclk_freq) + broxton_set_cdclk(dev, req_cdclk); +} + static int haswell_crtc_compute_clock(struct intel_crtc *crtc, struct intel_crtc_state *crtc_state) { @@ -11983,7 +12200,7 @@ static int __intel_set_mode(struct drm_crtc *crtc, * mode set on this crtc. For other crtcs we need to use the * adjusted_mode bits in the crtc directly. */ - if (IS_VALLEYVIEW(dev)) { + if (IS_VALLEYVIEW(dev) || IS_BROXTON(dev)) { ret = valleyview_modeset_global_pipes(state, &prepare_pipes); if (ret) goto done; @@ -14005,6 +14222,9 @@ static void intel_init_display(struct drm_device *dev) } else if (IS_VALLEYVIEW(dev)) { dev_priv->display.modeset_global_resources = valleyview_modeset_global_resources; + } else if (IS_BROXTON(dev)) { + dev_priv->display.modeset_global_resources = + broxton_modeset_global_resources; } switch (INTEL_INFO(dev)->gen) { |