1 files changed, 10 insertions, 59 deletions

diff --git a/drivers/gpu/drm/i915/intel_dp.c b/drivers/gpu/drm/i915/intel_dp.c
index c4e36759a756..0936d08aa982 100644
--- a/drivers/gpu/drm/i915/intel_dp.c
+++ b/drivers/gpu/drm/i915/intel_dp.c
@@ -1868,42 +1868,6 @@ intel_dp_compute_link_config_wide(struct intel_dp *intel_dp,
 	return -EINVAL;
 }
 
-/* Optimize link config in order: max bpp, min lanes, min clock */
-static int
-intel_dp_compute_link_config_fast(struct intel_dp *intel_dp,
-				  struct intel_crtc_state *pipe_config,
-				  const struct link_config_limits *limits)
-{
-	struct drm_display_mode *adjusted_mode = &pipe_config->base.adjusted_mode;
-	int bpp, clock, lane_count;
-	int mode_rate, link_clock, link_avail;
-
-	for (bpp = limits->max_bpp; bpp >= limits->min_bpp; bpp -= 2 * 3) {
-		mode_rate = intel_dp_link_required(adjusted_mode->crtc_clock,
-						   bpp);
-
-		for (lane_count = limits->min_lane_count;
-		     lane_count <= limits->max_lane_count;
-		     lane_count <<= 1) {
-			for (clock = limits->min_clock; clock <= limits->max_clock; clock++) {
-				link_clock = intel_dp->common_rates[clock];
-				link_avail = intel_dp_max_data_rate(link_clock,
-								    lane_count);
-
-				if (mode_rate <= link_avail) {
-					pipe_config->lane_count = lane_count;
-					pipe_config->pipe_bpp = bpp;
-					pipe_config->port_clock = link_clock;
-
-					return 0;
-				}
-			}
-		}
-	}
-
-	return -EINVAL;
-}
-
 static int intel_dp_dsc_compute_bpp(struct intel_dp *intel_dp, u8 dsc_max_bpc)
 {
 	int i, num_bpc;
@@ -2040,15 +2004,13 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
 	limits.min_bpp = 6 * 3;
 	limits.max_bpp = intel_dp_compute_bpp(intel_dp, pipe_config);
 
-	if (intel_dp_is_edp(intel_dp) && intel_dp->edp_dpcd[0] < DP_EDP_14) {
+	if (intel_dp_is_edp(intel_dp)) {
 		/*
 		 * Use the maximum clock and number of lanes the eDP panel
-		 * advertizes being capable of. The eDP 1.3 and earlier panels
-		 * are generally designed to support only a single clock and
-		 * lane configuration, and typically these values correspond to
-		 * the native resolution of the panel. With eDP 1.4 rate select
-		 * and DSC, this is decreasingly the case, and we need to be
-		 * able to select less than maximum link config.
+		 * advertizes being capable of. The panels are generally
+		 * designed to support only a single clock and lane
+		 * configuration, and typically these values correspond to the
+		 * native resolution of the panel.
 		 */
 		limits.min_lane_count = limits.max_lane_count;
 		limits.min_clock = limits.max_clock;
@@ -2062,22 +2024,11 @@ intel_dp_compute_link_config(struct intel_encoder *encoder,
 		      intel_dp->common_rates[limits.max_clock],
 		      limits.max_bpp, adjusted_mode->crtc_clock);
 
-	if (intel_dp_is_edp(intel_dp))
-		/*
-		 * Optimize for fast and narrow. eDP 1.3 section 3.3 and eDP 1.4
-		 * section A.1: "It is recommended that the minimum number of
-		 * lanes be used, using the minimum link rate allowed for that
-		 * lane configuration."
-		 *
-		 * Note that we use the max clock and lane count for eDP 1.3 and
-		 * earlier, and fast vs. wide is irrelevant.
-		 */
-		ret = intel_dp_compute_link_config_fast(intel_dp, pipe_config,
-							&limits);
-	else
-		/* Optimize for slow and wide. */
-		ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config,
-							&limits);
+	/*
+	 * Optimize for slow and wide. This is the place to add alternative
+	 * optimization policy.
+	 */
+	ret = intel_dp_compute_link_config_wide(intel_dp, pipe_config, &limits);
 
 	/* enable compression if the mode doesn't fit available BW */
 	DRM_DEBUG_KMS("Force DSC en = %d\n", intel_dp->force_dsc_en);