diff options
Diffstat (limited to 'drivers/gpu/drm/i915/intel_dsi_pll.c')
-rw-r--r-- | drivers/gpu/drm/i915/intel_dsi_pll.c | 135 |
1 files changed, 105 insertions, 30 deletions
diff --git a/drivers/gpu/drm/i915/intel_dsi_pll.c b/drivers/gpu/drm/i915/intel_dsi_pll.c index 61440e5c2563..2ff2ee7f3b78 100644 --- a/drivers/gpu/drm/i915/intel_dsi_pll.c +++ b/drivers/gpu/drm/i915/intel_dsi_pll.c @@ -206,17 +206,24 @@ static bool bxt_dsi_pll_is_enabled(struct drm_i915_private *dev_priv) return false; /* - * Both dividers must be programmed with valid values even if only one - * of the PLL is used, see BSpec/Broxton Clocks. Check this here for + * Dividers must be programmed with valid values. As per BSEPC, for + * GEMINLAKE only PORT A divider values are checked while for BXT + * both divider values are validated. Check this here for * paranoia, since BIOS is known to misconfigure PLLs in this way at * times, and since accessing DSI registers with invalid dividers * causes a system hang. */ val = I915_READ(BXT_DSI_PLL_CTL); - if (!(val & BXT_DSIA_16X_MASK) || !(val & BXT_DSIC_16X_MASK)) { - DRM_DEBUG_DRIVER("PLL is enabled with invalid divider settings (%08x)\n", - val); - enabled = false; + if (IS_GEMINILAKE(dev_priv)) { + if (!(val & BXT_DSIA_16X_MASK)) { + DRM_DEBUG_DRIVER("Invalid PLL divider (%08x)\n", val); + enabled = false; + } + } else { + if (!(val & BXT_DSIA_16X_MASK) || !(val & BXT_DSIC_16X_MASK)) { + DRM_DEBUG_DRIVER("Invalid PLL divider (%08x)\n", val); + enabled = false; + } } return enabled; @@ -372,6 +379,53 @@ static void vlv_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) ESCAPE_CLOCK_DIVIDER_SHIFT); } +static void glk_dsi_program_esc_clock(struct drm_device *dev, + const struct intel_crtc_state *config) +{ + struct drm_i915_private *dev_priv = to_i915(dev); + u32 dsi_rate = 0; + u32 pll_ratio = 0; + u32 ddr_clk = 0; + u32 div1_value = 0; + u32 div2_value = 0; + u32 txesc1_div = 0; + u32 txesc2_div = 0; + + pll_ratio = config->dsi_pll.ctrl & BXT_DSI_PLL_RATIO_MASK; + + dsi_rate = (BXT_REF_CLOCK_KHZ * pll_ratio) / 2; + + ddr_clk = dsi_rate / 2; + + /* Variable divider value */ + div1_value = DIV_ROUND_CLOSEST(ddr_clk, 20000); + + /* Calculate TXESC1 divider */ + if (div1_value <= 10) + txesc1_div = div1_value; + else if ((div1_value > 10) && (div1_value <= 20)) + txesc1_div = DIV_ROUND_UP(div1_value, 2); + else if ((div1_value > 20) && (div1_value <= 30)) + txesc1_div = DIV_ROUND_UP(div1_value, 4); + else if ((div1_value > 30) && (div1_value <= 40)) + txesc1_div = DIV_ROUND_UP(div1_value, 6); + else if ((div1_value > 40) && (div1_value <= 50)) + txesc1_div = DIV_ROUND_UP(div1_value, 8); + else + txesc1_div = 10; + + /* Calculate TXESC2 divider */ + div2_value = DIV_ROUND_UP(div1_value, txesc1_div); + + if (div2_value < 10) + txesc2_div = div2_value; + else + txesc2_div = 10; + + I915_WRITE(MIPIO_TXESC_CLK_DIV1, txesc1_div & GLK_TX_ESC_CLK_DIV1_MASK); + I915_WRITE(MIPIO_TXESC_CLK_DIV2, txesc2_div & GLK_TX_ESC_CLK_DIV2_MASK); +} + /* Program BXT Mipi clocks and dividers */ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port, const struct intel_crtc_state *config) @@ -416,11 +470,7 @@ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port, rx_div_lower = rx_div & RX_DIVIDER_BIT_1_2; rx_div_upper = (rx_div & RX_DIVIDER_BIT_3_4) >> 2; - /* As per bpsec program the 8/3X clock divider to the below value */ - if (dev_priv->vbt.dsi.config->is_cmd_mode) - mipi_8by3_divider = 0x2; - else - mipi_8by3_divider = 0x3; + mipi_8by3_divider = 0x2; tmp |= BXT_MIPI_8X_BY3_DIVIDER(port, mipi_8by3_divider); tmp |= BXT_MIPI_TX_ESCLK_DIVIDER(port, tx_div); @@ -430,11 +480,12 @@ static void bxt_dsi_program_clocks(struct drm_device *dev, enum port port, I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); } -static int bxt_compute_dsi_pll(struct intel_encoder *encoder, +static int gen9lp_compute_dsi_pll(struct intel_encoder *encoder, struct intel_crtc_state *config) { + struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); struct intel_dsi *intel_dsi = enc_to_intel_dsi(&encoder->base); - u8 dsi_ratio; + u8 dsi_ratio, dsi_ratio_min, dsi_ratio_max; u32 dsi_clk; dsi_clk = dsi_clk_from_pclk(intel_dsi->pclk, intel_dsi->pixel_format, @@ -446,11 +497,20 @@ static int bxt_compute_dsi_pll(struct intel_encoder *encoder, * round 'up' the result */ dsi_ratio = DIV_ROUND_UP(dsi_clk * 2, BXT_REF_CLOCK_KHZ); - if (dsi_ratio < BXT_DSI_PLL_RATIO_MIN || - dsi_ratio > BXT_DSI_PLL_RATIO_MAX) { + + if (IS_BROXTON(dev_priv)) { + dsi_ratio_min = BXT_DSI_PLL_RATIO_MIN; + dsi_ratio_max = BXT_DSI_PLL_RATIO_MAX; + } else { + dsi_ratio_min = GLK_DSI_PLL_RATIO_MIN; + dsi_ratio_max = GLK_DSI_PLL_RATIO_MAX; + } + + if (dsi_ratio < dsi_ratio_min || dsi_ratio > dsi_ratio_max) { DRM_ERROR("Cant get a suitable ratio from DSI PLL ratios\n"); return -ECHRNG; - } + } else + DRM_DEBUG_KMS("DSI PLL calculation is Done!!\n"); /* * Program DSI ratio and Select MIPIC and MIPIA PLL output as 8x @@ -462,13 +522,13 @@ static int bxt_compute_dsi_pll(struct intel_encoder *encoder, /* As per recommendation from hardware team, * Prog PVD ratio =1 if dsi ratio <= 50 */ - if (dsi_ratio <= 50) + if (IS_BROXTON(dev_priv) && dsi_ratio <= 50) config->dsi_pll.ctrl |= BXT_DSI_PLL_PVD_RATIO_1; return 0; } -static void bxt_enable_dsi_pll(struct intel_encoder *encoder, +static void gen9lp_enable_dsi_pll(struct intel_encoder *encoder, const struct intel_crtc_state *config) { struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); @@ -483,8 +543,12 @@ static void bxt_enable_dsi_pll(struct intel_encoder *encoder, POSTING_READ(BXT_DSI_PLL_CTL); /* Program TX, RX, Dphy clocks */ - for_each_dsi_port(port, intel_dsi->ports) - bxt_dsi_program_clocks(encoder->base.dev, port, config); + if (IS_BROXTON(dev_priv)) { + for_each_dsi_port(port, intel_dsi->ports) + bxt_dsi_program_clocks(encoder->base.dev, port, config); + } else { + glk_dsi_program_esc_clock(encoder->base.dev, config); + } /* Enable DSI PLL */ val = I915_READ(BXT_DSI_PLL_ENABLE); @@ -522,7 +586,7 @@ int intel_compute_dsi_pll(struct intel_encoder *encoder, if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) return vlv_compute_dsi_pll(encoder, config); else if (IS_GEN9_LP(dev_priv)) - return bxt_compute_dsi_pll(encoder, config); + return gen9lp_compute_dsi_pll(encoder, config); return -ENODEV; } @@ -535,7 +599,7 @@ void intel_enable_dsi_pll(struct intel_encoder *encoder, if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) vlv_enable_dsi_pll(encoder, config); else if (IS_GEN9_LP(dev_priv)) - bxt_enable_dsi_pll(encoder, config); + gen9lp_enable_dsi_pll(encoder, config); } void intel_disable_dsi_pll(struct intel_encoder *encoder) @@ -548,19 +612,30 @@ void intel_disable_dsi_pll(struct intel_encoder *encoder) bxt_disable_dsi_pll(encoder); } -static void bxt_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) +static void gen9lp_dsi_reset_clocks(struct intel_encoder *encoder, + enum port port) { u32 tmp; struct drm_device *dev = encoder->base.dev; struct drm_i915_private *dev_priv = to_i915(dev); /* Clear old configurations */ - tmp = I915_READ(BXT_MIPI_CLOCK_CTL); - tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)); - tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port)); - tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port)); - tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port)); - I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); + if (IS_BROXTON(dev_priv)) { + tmp = I915_READ(BXT_MIPI_CLOCK_CTL); + tmp &= ~(BXT_MIPI_TX_ESCLK_FIXDIV_MASK(port)); + tmp &= ~(BXT_MIPI_RX_ESCLK_UPPER_FIXDIV_MASK(port)); + tmp &= ~(BXT_MIPI_8X_BY3_DIVIDER_MASK(port)); + tmp &= ~(BXT_MIPI_RX_ESCLK_LOWER_FIXDIV_MASK(port)); + I915_WRITE(BXT_MIPI_CLOCK_CTL, tmp); + } else { + tmp = I915_READ(MIPIO_TXESC_CLK_DIV1); + tmp &= ~GLK_TX_ESC_CLK_DIV1_MASK; + I915_WRITE(MIPIO_TXESC_CLK_DIV1, tmp); + + tmp = I915_READ(MIPIO_TXESC_CLK_DIV2); + tmp &= ~GLK_TX_ESC_CLK_DIV2_MASK; + I915_WRITE(MIPIO_TXESC_CLK_DIV2, tmp); + } I915_WRITE(MIPI_EOT_DISABLE(port), CLOCKSTOP); } @@ -569,7 +644,7 @@ void intel_dsi_reset_clocks(struct intel_encoder *encoder, enum port port) struct drm_i915_private *dev_priv = to_i915(encoder->base.dev); if (IS_GEN9_LP(dev_priv)) - bxt_dsi_reset_clocks(encoder, port); + gen9lp_dsi_reset_clocks(encoder, port); else if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) vlv_dsi_reset_clocks(encoder, port); } |