1 files changed, 251 insertions, 0 deletions
diff --git a/drivers/gpu/drm/i915/intel_guc_fw.c b/drivers/gpu/drm/i915/intel_guc_fw.c
new file mode 100644
index 000000000000..ef67a36354c5
--- /dev/null
+++ b/drivers/gpu/drm/i915/intel_guc_fw.c
@@ -0,0 +1,251 @@
+/*
+ * Copyright © 2014 Intel Corporation
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice (including the next
+ * paragraph) shall be included in all copies or substantial portions of the
+ * Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
+ * IN THE SOFTWARE.
+ *
+ * Authors:
+ *    Vinit Azad <vinit.azad@intel.com>
+ *    Ben Widawsky <ben@bwidawsk.net>
+ *    Dave Gordon <david.s.gordon@intel.com>
+ *    Alex Dai <yu.dai@intel.com>
+ */
+
+#include "intel_guc_fw.h"
+#include "i915_drv.h"
+
+#define SKL_FW_MAJOR 6
+#define SKL_FW_MINOR 1
+
+#define BXT_FW_MAJOR 8
+#define BXT_FW_MINOR 7
+
+#define KBL_FW_MAJOR 9
+#define KBL_FW_MINOR 14
+
+#define GLK_FW_MAJOR 10
+#define GLK_FW_MINOR 56
+
+#define GUC_FW_PATH(platform, major, minor) \
+       "i915/" __stringify(platform) "_guc_ver" __stringify(major) "_" __stringify(minor) ".bin"
+
+#define I915_SKL_GUC_UCODE GUC_FW_PATH(skl, SKL_FW_MAJOR, SKL_FW_MINOR)
+MODULE_FIRMWARE(I915_SKL_GUC_UCODE);
+
+#define I915_BXT_GUC_UCODE GUC_FW_PATH(bxt, BXT_FW_MAJOR, BXT_FW_MINOR)
+MODULE_FIRMWARE(I915_BXT_GUC_UCODE);
+
+#define I915_KBL_GUC_UCODE GUC_FW_PATH(kbl, KBL_FW_MAJOR, KBL_FW_MINOR)
+MODULE_FIRMWARE(I915_KBL_GUC_UCODE);
+
+#define I915_GLK_GUC_UCODE GUC_FW_PATH(glk, GLK_FW_MAJOR, GLK_FW_MINOR)
+
+/**
+ * intel_guc_fw_select() - selects GuC firmware for uploading
+ *
+ * @guc:	intel_guc struct
+ *
+ * Return: zero when we know firmware, non-zero in other case
+ */
+int intel_guc_fw_select(struct intel_guc *guc)
+{
+	struct drm_i915_private *dev_priv = guc_to_i915(guc);
+
+	intel_uc_fw_init(&guc->fw, INTEL_UC_FW_TYPE_GUC);
+
+	if (i915_modparams.guc_firmware_path) {
+		guc->fw.path = i915_modparams.guc_firmware_path;
+		guc->fw.major_ver_wanted = 0;
+		guc->fw.minor_ver_wanted = 0;
+	} else if (IS_SKYLAKE(dev_priv)) {
+		guc->fw.path = I915_SKL_GUC_UCODE;
+		guc->fw.major_ver_wanted = SKL_FW_MAJOR;
+		guc->fw.minor_ver_wanted = SKL_FW_MINOR;
+	} else if (IS_BROXTON(dev_priv)) {
+		guc->fw.path = I915_BXT_GUC_UCODE;
+		guc->fw.major_ver_wanted = BXT_FW_MAJOR;
+		guc->fw.minor_ver_wanted = BXT_FW_MINOR;
+	} else if (IS_KABYLAKE(dev_priv) || IS_COFFEELAKE(dev_priv)) {
+		guc->fw.path = I915_KBL_GUC_UCODE;
+		guc->fw.major_ver_wanted = KBL_FW_MAJOR;
+		guc->fw.minor_ver_wanted = KBL_FW_MINOR;
+	} else if (IS_GEMINILAKE(dev_priv)) {
+		guc->fw.path = I915_GLK_GUC_UCODE;
+		guc->fw.major_ver_wanted = GLK_FW_MAJOR;
+		guc->fw.minor_ver_wanted = GLK_FW_MINOR;
+	} else {
+		DRM_ERROR("No GuC firmware known for platform with GuC!\n");
+		return -ENOENT;
+	}
+
+	return 0;
+}
+
+/*
+ * Read the GuC status register (GUC_STATUS) and store it in the
+ * specified location; then return a boolean indicating whether
+ * the value matches either of two values representing completion
+ * of the GuC boot process.
+ *
+ * This is used for polling the GuC status in a wait_for()
+ * loop below.
+ */
+static inline bool guc_ucode_response(struct drm_i915_private *dev_priv,
+				      u32 *status)
+{
+	u32 val = I915_READ(GUC_STATUS);
+	u32 uk_val = val & GS_UKERNEL_MASK;
+	*status = val;
+	return (uk_val == GS_UKERNEL_READY ||
+		((val & GS_MIA_CORE_STATE) && uk_val == GS_UKERNEL_LAPIC_DONE));
+}
+
+/*
+ * Transfer the firmware image to RAM for execution by the microcontroller.
+ *
+ * Architecturally, the DMA engine is bidirectional, and can potentially even
+ * transfer between GTT locations. This functionality is left out of the API
+ * for now as there is no need for it.
+ *
+ * Note that GuC needs the CSS header plus uKernel code to be copied by the
+ * DMA engine in one operation, whereas the RSA signature is loaded via MMIO.
+ */
+static int guc_ucode_xfer_dma(struct drm_i915_private *dev_priv,
+			      struct i915_vma *vma)
+{
+	struct intel_uc_fw *guc_fw = &dev_priv->guc.fw;
+	unsigned long offset;
+	struct sg_table *sg = vma->pages;
+	u32 status, rsa[UOS_RSA_SCRATCH_MAX_COUNT];
+	int i, ret = 0;
+
+	/* where RSA signature starts */
+	offset = guc_fw->rsa_offset;
+
+	/* Copy RSA signature from the fw image to HW for verification */
+	sg_pcopy_to_buffer(sg->sgl, sg->nents, rsa, sizeof(rsa), offset);
+	for (i = 0; i < UOS_RSA_SCRATCH_MAX_COUNT; i++)
+		I915_WRITE(UOS_RSA_SCRATCH(i), rsa[i]);
+
+	/* The header plus uCode will be copied to WOPCM via DMA, excluding any
+	 * other components */
+	I915_WRITE(DMA_COPY_SIZE, guc_fw->header_size + guc_fw->ucode_size);
+
+	/* Set the source address for the new blob */
+	offset = guc_ggtt_offset(vma) + guc_fw->header_offset;
+	I915_WRITE(DMA_ADDR_0_LOW, lower_32_bits(offset));
+	I915_WRITE(DMA_ADDR_0_HIGH, upper_32_bits(offset) & 0xFFFF);
+
+	/*
+	 * Set the DMA destination. Current uCode expects the code to be
+	 * loaded at 8k; locations below this are used for the stack.
+	 */
+	I915_WRITE(DMA_ADDR_1_LOW, 0x2000);
+	I915_WRITE(DMA_ADDR_1_HIGH, DMA_ADDRESS_SPACE_WOPCM);
+
+	/* Finally start the DMA */
+	I915_WRITE(DMA_CTRL, _MASKED_BIT_ENABLE(UOS_MOVE | START_DMA));
+
+	/*
+	 * Wait for the DMA to complete & the GuC to start up.
+	 * NB: Docs recommend not using the interrupt for completion.
+	 * Measurements indicate this should take no more than 20ms, so a
+	 * timeout here indicates that the GuC has failed and is unusable.
+	 * (Higher levels of the driver will attempt to fall back to
+	 * execlist mode if this happens.)
+	 */
+	ret = wait_for(guc_ucode_response(dev_priv, &status), 100);
+
+	DRM_DEBUG_DRIVER("DMA status 0x%x, GuC status 0x%x\n",
+			I915_READ(DMA_CTRL), status);
+
+	if ((status & GS_BOOTROM_MASK) == GS_BOOTROM_RSA_FAILED) {
+		DRM_ERROR("GuC firmware signature verification failed\n");
+		ret = -ENOEXEC;
+	}
+
+	DRM_DEBUG_DRIVER("returning %d\n", ret);
+
+	return ret;
+}
+
+/*
+ * Load the GuC firmware blob into the MinuteIA.
+ */
+static int guc_ucode_xfer(struct intel_uc_fw *guc_fw, struct i915_vma *vma)
+{
+	struct intel_guc *guc = container_of(guc_fw, struct intel_guc, fw);
+	struct drm_i915_private *dev_priv = guc_to_i915(guc);
+	int ret;
+
+	GEM_BUG_ON(guc_fw->type != INTEL_UC_FW_TYPE_GUC);
+
+	intel_uncore_forcewake_get(dev_priv, FORCEWAKE_ALL);
+
+	/* Enable MIA caching. GuC clock gating is disabled. */
+	I915_WRITE(GUC_SHIM_CONTROL, GUC_SHIM_CONTROL_VALUE);
+
+	/* WaDisableMinuteIaClockGating:bxt */
+	if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_A1)) {
+		I915_WRITE(GUC_SHIM_CONTROL, (I915_READ(GUC_SHIM_CONTROL) &
+					      ~GUC_ENABLE_MIA_CLOCK_GATING));
+	}
+
+	/* WaC6DisallowByGfxPause:bxt */
+	if (IS_BXT_REVID(dev_priv, 0, BXT_REVID_B0))
+		I915_WRITE(GEN6_GFXPAUSE, 0x30FFF);
+
+	if (IS_GEN9_LP(dev_priv))
+		I915_WRITE(GEN9LP_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
+	else
+		I915_WRITE(GEN9_GT_PM_CONFIG, GT_DOORBELL_ENABLE);
+
+	if (IS_GEN9(dev_priv)) {
+		/* DOP Clock Gating Enable for GuC clocks */
+		I915_WRITE(GEN7_MISCCPCTL, (GEN8_DOP_CLOCK_GATE_GUC_ENABLE |
+					    I915_READ(GEN7_MISCCPCTL)));
+
+		/* allows for 5us (in 10ns units) before GT can go to RC6 */
+		I915_WRITE(GUC_ARAT_C6DIS, 0x1FF);
+	}
+
+	ret = guc_ucode_xfer_dma(dev_priv, vma);
+
+	intel_uncore_forcewake_put(dev_priv, FORCEWAKE_ALL);
+
+	return ret;
+}
+
+/**
+ * intel_guc_fw_upload() - finish preparing the GuC for activity
+ * @guc: intel_guc structure
+ *
+ * Called during driver loading and also after a GPU reset.
+ *
+ * The main action required here it to load the GuC uCode into the device.
+ * The firmware image should have already been fetched into memory by the
+ * earlier call to intel_guc_init(), so here we need only check that
+ * worked, and then transfer the image to the h/w.
+ *
+ * Return:	non-zero code on error
+ */
+int intel_guc_fw_upload(struct intel_guc *guc)
+{
+	return intel_uc_fw_upload(&guc->fw, guc_ucode_xfer);
+}