diff options
Diffstat (limited to 'drivers/gpu/drm/mcde/mcde_drv.c')
| -rw-r--r-- | drivers/gpu/drm/mcde/mcde_drv.c | 46 |
1 files changed, 34 insertions, 12 deletions
diff --git a/drivers/gpu/drm/mcde/mcde_drv.c b/drivers/gpu/drm/mcde/mcde_drv.c index 9d25181bd7e2..e60566a5739c 100644 --- a/drivers/gpu/drm/mcde/mcde_drv.c +++ b/drivers/gpu/drm/mcde/mcde_drv.c @@ -22,13 +22,13 @@ * The hardware has four display pipes, and the layout is a little * bit like this:: * - * Memory -> Overlay -> Channel -> FIFO -> 5 formatters -> DSI/DPI - * External 0..5 0..3 A,B, 3 x DSI bridge + * Memory -> Overlay -> Channel -> FIFO -> 8 formatters -> DSI/DPI + * External 0..5 0..3 A,B, 6 x DSI bridge * source 0..9 C0,C1 2 x DPI * * FIFOs A and B are for LCD and HDMI while FIFO CO/C1 are for * panels with embedded buffer. - * 3 of the formatters are for DSI. + * 6 of the formatters are for DSI, 3 pairs for VID/CMD respectively. * 2 of the formatters are for DPI. * * Behind the formatters are the DSI or DPI ports that route to @@ -130,9 +130,37 @@ static int mcde_modeset_init(struct drm_device *drm) struct mcde *mcde = to_mcde(drm); int ret; + /* + * If no other bridge was found, check if we have a DPI panel or + * any other bridge connected directly to the MCDE DPI output. + * If a DSI bridge is found, DSI will take precedence. + * + * TODO: more elaborate bridge selection if we have more than one + * thing attached to the system. + */ if (!mcde->bridge) { - dev_err(drm->dev, "no display output bridge yet\n"); - return -EPROBE_DEFER; + struct drm_panel *panel; + struct drm_bridge *bridge; + + ret = drm_of_find_panel_or_bridge(drm->dev->of_node, + 0, 0, &panel, &bridge); + if (ret) { + dev_err(drm->dev, + "Could not locate any output bridge or panel\n"); + return ret; + } + if (panel) { + bridge = drm_panel_bridge_add_typed(panel, + DRM_MODE_CONNECTOR_DPI); + if (IS_ERR(bridge)) { + dev_err(drm->dev, + "Could not connect panel bridge\n"); + return PTR_ERR(bridge); + } + } + mcde->dpi_output = true; + mcde->bridge = bridge; + mcde->flow_mode = MCDE_DPI_FORMATTER_FLOW; } mode_config = &drm->mode_config; @@ -156,13 +184,7 @@ static int mcde_modeset_init(struct drm_device *drm) return ret; } - /* - * Attach the DSI bridge - * - * TODO: when adding support for the DPI bridge or several DSI bridges, - * we selectively connect the bridge(s) here instead of this simple - * attachment. - */ + /* Attach the bridge. */ ret = drm_simple_display_pipe_attach_bridge(&mcde->pipe, mcde->bridge); if (ret) { |