diff options
Diffstat (limited to 'drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c')
| -rw-r--r-- | drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c | 99 |
1 files changed, 61 insertions, 38 deletions
diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c index 46fac545dc2b..2f2863cf8b45 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_crtc.c @@ -62,8 +62,8 @@ struct mdp5_crtc { /* current cursor being scanned out: */ struct drm_gem_object *scanout_bo; - uint32_t width; - uint32_t height; + uint32_t width, height; + uint32_t x, y; } cursor; }; #define to_mdp5_crtc(x) container_of(x, struct mdp5_crtc, base) @@ -103,8 +103,8 @@ static void crtc_flush_all(struct drm_crtc *crtc) struct drm_plane *plane; uint32_t flush_mask = 0; - /* we could have already released CTL in the disable path: */ - if (!mdp5_crtc->ctl) + /* this should not happen: */ + if (WARN_ON(!mdp5_crtc->ctl)) return; drm_atomic_crtc_for_each_plane(plane, crtc) { @@ -143,6 +143,11 @@ static void complete_flip(struct drm_crtc *crtc, struct drm_file *file) drm_atomic_crtc_for_each_plane(plane, crtc) { mdp5_plane_complete_flip(plane); } + + if (mdp5_crtc->ctl && !crtc->state->enable) { + mdp5_ctl_release(mdp5_crtc->ctl); + mdp5_crtc->ctl = NULL; + } } static void unref_cursor_worker(struct drm_flip_work *work, void *val) @@ -386,14 +391,17 @@ static void mdp5_crtc_atomic_flush(struct drm_crtc *crtc) mdp5_crtc->event = crtc->state->event; spin_unlock_irqrestore(&dev->event_lock, flags); + /* + * If no CTL has been allocated in mdp5_crtc_atomic_check(), + * it means we are trying to flush a CRTC whose state is disabled: + * nothing else needs to be done. + */ + if (unlikely(!mdp5_crtc->ctl)) + return; + blend_setup(crtc); crtc_flush_all(crtc); request_pending(crtc, PENDING_FLIP); - - if (mdp5_crtc->ctl && !crtc->state->enable) { - mdp5_ctl_release(mdp5_crtc->ctl); - mdp5_crtc->ctl = NULL; - } } static int mdp5_crtc_set_property(struct drm_crtc *crtc, @@ -403,6 +411,32 @@ static int mdp5_crtc_set_property(struct drm_crtc *crtc, return -EINVAL; } +static void get_roi(struct drm_crtc *crtc, uint32_t *roi_w, uint32_t *roi_h) +{ + struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); + uint32_t xres = crtc->mode.hdisplay; + uint32_t yres = crtc->mode.vdisplay; + + /* + * Cursor Region Of Interest (ROI) is a plane read from cursor + * buffer to render. The ROI region is determined by the visibility of + * the cursor point. In the default Cursor image the cursor point will + * be at the top left of the cursor image, unless it is specified + * otherwise using hotspot feature. + * + * If the cursor point reaches the right (xres - x < cursor.width) or + * bottom (yres - y < cursor.height) boundary of the screen, then ROI + * width and ROI height need to be evaluated to crop the cursor image + * accordingly. + * (xres-x) will be new cursor width when x > (xres - cursor.width) + * (yres-y) will be new cursor height when y > (yres - cursor.height) + */ + *roi_w = min(mdp5_crtc->cursor.width, xres - + mdp5_crtc->cursor.x); + *roi_h = min(mdp5_crtc->cursor.height, yres - + mdp5_crtc->cursor.y); +} + static int mdp5_crtc_cursor_set(struct drm_crtc *crtc, struct drm_file *file, uint32_t handle, uint32_t width, uint32_t height) @@ -416,6 +450,7 @@ static int mdp5_crtc_cursor_set(struct drm_crtc *crtc, unsigned int depth; enum mdp5_cursor_alpha cur_alpha = CURSOR_ALPHA_PER_PIXEL; uint32_t flush_mask = mdp_ctl_flush_mask_cursor(0); + uint32_t roi_w, roi_h; unsigned long flags; if ((width > CURSOR_WIDTH) || (height > CURSOR_HEIGHT)) { @@ -446,6 +481,12 @@ static int mdp5_crtc_cursor_set(struct drm_crtc *crtc, spin_lock_irqsave(&mdp5_crtc->cursor.lock, flags); old_bo = mdp5_crtc->cursor.scanout_bo; + mdp5_crtc->cursor.scanout_bo = cursor_bo; + mdp5_crtc->cursor.width = width; + mdp5_crtc->cursor.height = height; + + get_roi(crtc, &roi_w, &roi_h); + mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_STRIDE(lm), stride); mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_FORMAT(lm), MDP5_LM_CURSOR_FORMAT_FORMAT(CURSOR_FMT_ARGB8888)); @@ -453,19 +494,14 @@ static int mdp5_crtc_cursor_set(struct drm_crtc *crtc, MDP5_LM_CURSOR_IMG_SIZE_SRC_H(height) | MDP5_LM_CURSOR_IMG_SIZE_SRC_W(width)); mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_SIZE(lm), - MDP5_LM_CURSOR_SIZE_ROI_H(height) | - MDP5_LM_CURSOR_SIZE_ROI_W(width)); + MDP5_LM_CURSOR_SIZE_ROI_H(roi_h) | + MDP5_LM_CURSOR_SIZE_ROI_W(roi_w)); mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BASE_ADDR(lm), cursor_addr); - blendcfg = MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_EN; - blendcfg |= MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_TRANSP_EN; blendcfg |= MDP5_LM_CURSOR_BLEND_CONFIG_BLEND_ALPHA_SEL(cur_alpha); mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_BLEND_CONFIG(lm), blendcfg); - mdp5_crtc->cursor.scanout_bo = cursor_bo; - mdp5_crtc->cursor.width = width; - mdp5_crtc->cursor.height = height; spin_unlock_irqrestore(&mdp5_crtc->cursor.lock, flags); ret = mdp5_ctl_set_cursor(mdp5_crtc->ctl, true); @@ -489,31 +525,18 @@ static int mdp5_crtc_cursor_move(struct drm_crtc *crtc, int x, int y) struct mdp5_kms *mdp5_kms = get_kms(crtc); struct mdp5_crtc *mdp5_crtc = to_mdp5_crtc(crtc); uint32_t flush_mask = mdp_ctl_flush_mask_cursor(0); - uint32_t xres = crtc->mode.hdisplay; - uint32_t yres = crtc->mode.vdisplay; uint32_t roi_w; uint32_t roi_h; unsigned long flags; - x = (x > 0) ? x : 0; - y = (y > 0) ? y : 0; + /* In case the CRTC is disabled, just drop the cursor update */ + if (unlikely(!crtc->state->enable)) + return 0; - /* - * Cursor Region Of Interest (ROI) is a plane read from cursor - * buffer to render. The ROI region is determined by the visiblity of - * the cursor point. In the default Cursor image the cursor point will - * be at the top left of the cursor image, unless it is specified - * otherwise using hotspot feature. - * - * If the cursor point reaches the right (xres - x < cursor.width) or - * bottom (yres - y < cursor.height) boundary of the screen, then ROI - * width and ROI height need to be evaluated to crop the cursor image - * accordingly. - * (xres-x) will be new cursor width when x > (xres - cursor.width) - * (yres-y) will be new cursor height when y > (yres - cursor.height) - */ - roi_w = min(mdp5_crtc->cursor.width, xres - x); - roi_h = min(mdp5_crtc->cursor.height, yres - y); + mdp5_crtc->cursor.x = x = max(x, 0); + mdp5_crtc->cursor.y = y = max(y, 0); + + get_roi(crtc, &roi_w, &roi_h); spin_lock_irqsave(&mdp5_crtc->cursor.lock, flags); mdp5_write(mdp5_kms, REG_MDP5_LM_CURSOR_SIZE(mdp5_crtc->lm), @@ -544,8 +567,8 @@ static const struct drm_crtc_funcs mdp5_crtc_funcs = { static const struct drm_crtc_helper_funcs mdp5_crtc_helper_funcs = { .mode_fixup = mdp5_crtc_mode_fixup, .mode_set_nofb = mdp5_crtc_mode_set_nofb, - .prepare = mdp5_crtc_disable, - .commit = mdp5_crtc_enable, + .disable = mdp5_crtc_disable, + .enable = mdp5_crtc_enable, .atomic_check = mdp5_crtc_atomic_check, .atomic_begin = mdp5_crtc_atomic_begin, .atomic_flush = mdp5_crtc_atomic_flush, |