diff options
Diffstat (limited to 'drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpc.fuc')
| -rw-r--r-- | drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpc.fuc | 137 |
1 files changed, 53 insertions, 84 deletions
diff --git a/drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpc.fuc b/drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpc.fuc index 5547c1b3f4f2..96cbcea3b2c9 100644 --- a/drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpc.fuc +++ b/drivers/gpu/drm/nouveau/core/engine/graph/fuc/gpc.fuc @@ -58,12 +58,9 @@ mmio_list_base: // error: push $r14 - mov $r14 -0x67ec // 0x9814 - sethi $r14 0x400000 - call #nv_wr32 // HUB_CTXCTL_CC_SCRATCH[5] = error code - add b32 $r14 0x41c + nv_wr32(NV_PGRAPH_FECS_CC_SCRATCH_VAL(5), $r15) mov $r15 1 - call #nv_wr32 // HUB_CTXCTL_INTR_UP_SET + nv_wr32(NV_PGRAPH_FECS_INTR_UP_SET, $r15) pop $r14 ret @@ -84,46 +81,40 @@ init: mov $sp $r0 // enable fifo access - mov $r1 0x1200 - mov $r2 2 - iowr I[$r1 + 0x000] $r2 // FIFO_ENABLE + mov $r2 NV_PGRAPH_GPCX_GPCCS_ACCESS_FIFO + nv_iowr(NV_PGRAPH_GPCX_GPCCS_ACCESS, 0, $r2) // setup i0 handler, and route all interrupts to it mov $r1 #ih mov $iv0 $r1 - mov $r1 0x400 - iowr I[$r1 + 0x300] $r0 // INTR_DISPATCH + nv_iowr(NV_PGRAPH_GPCX_GPCCS_INTR_ROUTE, 0, $r0) // enable fifo interrupt - mov $r2 4 - iowr I[$r1 + 0x000] $r2 // INTR_EN_SET + mov $r2 NV_PGRAPH_GPCX_GPCCS_INTR_EN_SET_FIFO + nv_iowr(NV_PGRAPH_GPCX_GPCCS_INTR_EN_SET, 0, $r2) // enable interrupts bset $flags ie0 // figure out which GPC we are, and how many TPCs we have - mov $r1 0x608 - shl b32 $r1 6 - iord $r2 I[$r1 + 0x000] // UNITS + nv_iord($r2, NV_PGRAPH_GPCX_GPCCS_UNITS, 0) mov $r3 1 and $r2 0x1f shl b32 $r3 $r2 sub b32 $r3 1 st b32 D[$r0 + #tpc_count] $r2 st b32 D[$r0 + #tpc_mask] $r3 - add b32 $r1 0x400 - iord $r2 I[$r1 + 0x000] // MYINDEX + nv_iord($r2, NV_PGRAPH_GPCX_GPCCS_MYINDEX, 0) st b32 D[$r0 + #gpc_id] $r2 #if NV_PGRAPH_GPCX_UNK__SIZE > 0 // figure out which, and how many, UNKs are actually present - mov $r14 0x0c30 - sethi $r14 0x500000 + imm32($r14, 0x500c30) clear b32 $r2 clear b32 $r3 clear b32 $r4 init_unk_loop: - call #nv_rd32 + call(nv_rd32) cmp b32 $r15 0 bra z #init_unk_next mov $r15 1 @@ -146,23 +137,21 @@ init: // set mmctx base addresses now so we don't have to do it later, // they don't currently ever change - mov $r4 0x700 - shl b32 $r4 6 shr b32 $r5 $r2 8 - iowr I[$r4 + 0x000] $r5 // MMCTX_SAVE_SWBASE - iowr I[$r4 + 0x100] $r5 // MMCTX_LOAD_SWBASE + nv_iowr(NV_PGRAPH_GPCX_GPCCS_MMCTX_SAVE_SWBASE, 0, $r5) + nv_iowr(NV_PGRAPH_GPCX_GPCCS_MMCTX_LOAD_SWBASE, 0, $r5) // calculate GPC mmio context size ld b32 $r14 D[$r0 + #gpc_mmio_list_head] ld b32 $r15 D[$r0 + #gpc_mmio_list_tail] - call #mmctx_size + call(mmctx_size) add b32 $r2 $r15 add b32 $r3 $r15 // calculate per-TPC mmio context size ld b32 $r14 D[$r0 + #tpc_mmio_list_head] ld b32 $r15 D[$r0 + #tpc_mmio_list_tail] - call #mmctx_size + call(mmctx_size) ld b32 $r14 D[$r0 + #tpc_count] mulu $r14 $r15 add b32 $r2 $r14 @@ -172,7 +161,7 @@ init: // calculate per-UNK mmio context size ld b32 $r14 D[$r0 + #unk_mmio_list_head] ld b32 $r15 D[$r0 + #unk_mmio_list_tail] - call #mmctx_size + call(mmctx_size) ld b32 $r14 D[$r0 + #unk_count] mulu $r14 $r15 add b32 $r2 $r14 @@ -180,9 +169,8 @@ init: #endif // round up base/size to 256 byte boundary (for strand SWBASE) - add b32 $r4 0x1300 shr b32 $r3 2 - iowr I[$r4 + 0x000] $r3 // MMCTX_LOAD_COUNT, wtf for?!? + nv_iowr(NV_PGRAPH_GPCX_GPCCS_MMCTX_LOAD_COUNT, 0, $r3) // wtf for?! shr b32 $r2 8 shr b32 $r3 6 add b32 $r2 1 @@ -192,7 +180,7 @@ init: // calculate size of strand context data mov b32 $r15 $r2 - call #strand_ctx_init + call(strand_ctx_init) add b32 $r3 $r15 // save context size, and tell HUB we're done @@ -208,7 +196,7 @@ main: bset $flags $p0 sleep $p0 mov $r13 #cmd_queue - call #queue_get + call(queue_get) bra $p1 #main // 0x0000-0x0003 are all context transfers @@ -224,13 +212,13 @@ main: or $r1 $r14 mov $flags $r1 // transfer context data - call #ctx_xfer + call(ctx_xfer) bra #main main_not_ctx_xfer: shl b32 $r15 $r14 16 or $r15 E_BAD_COMMAND - call #error + call(error) bra #main // interrupt handler @@ -247,22 +235,20 @@ ih: clear b32 $r0 // incoming fifo command? - iord $r10 I[$r0 + 0x200] // INTR - and $r11 $r10 0x00000004 + nv_iord($r10, NV_PGRAPH_GPCX_GPCCS_INTR, 0) + and $r11 $r10 NV_PGRAPH_GPCX_GPCCS_INTR_FIFO bra e #ih_no_fifo // queue incoming fifo command for later processing - mov $r11 0x1900 mov $r13 #cmd_queue - iord $r14 I[$r11 + 0x100] // FIFO_CMD - iord $r15 I[$r11 + 0x000] // FIFO_DATA - call #queue_put - add b32 $r11 0x400 + nv_iord($r14, NV_PGRAPH_GPCX_GPCCS_FIFO_CMD, 0) + nv_iord($r15, NV_PGRAPH_GPCX_GPCCS_FIFO_DATA, 0) + call(queue_put) mov $r14 1 - iowr I[$r11 + 0x000] $r14 // FIFO_ACK + nv_iowr(NV_PGRAPH_GPCX_GPCCS_FIFO_ACK, 0, $r14) // ack, and wake up main() ih_no_fifo: - iowr I[$r0 + 0x100] $r10 // INTR_ACK + nv_iowr(NV_PGRAPH_GPCX_GPCCS_INTR_ACK, 0, $r10) pop $r15 pop $r14 @@ -283,9 +269,7 @@ hub_barrier_done: mov $r15 1 ld b32 $r14 D[$r0 + #gpc_id] shl b32 $r15 $r14 - mov $r14 -0x6be8 // 0x409418 - HUB_BAR_SET - sethi $r14 0x400000 - call #nv_wr32 + nv_wr32(0x409418, $r15) // 0x409418 - HUB_BAR_SET ret // Disables various things, waits a bit, and re-enables them.. @@ -295,16 +279,15 @@ hub_barrier_done: // funny things happen. // ctx_redswitch: - mov $r14 0x614 - shl b32 $r14 6 - mov $r15 0x020 - iowr I[$r14] $r15 // GPC_RED_SWITCH = POWER - mov $r15 8 + mov $r15 NV_PGRAPH_GPCX_GPCCS_RED_SWITCH_POWER + nv_iowr(NV_PGRAPH_GPCX_GPCCS_RED_SWITCH, 0, $r15) + mov $r14 8 ctx_redswitch_delay: - sub b32 $r15 1 + sub b32 $r14 1 bra ne #ctx_redswitch_delay - mov $r15 0xa20 - iowr I[$r14] $r15 // GPC_RED_SWITCH = UNK11, ENABLE, POWER + or $r15 NV_PGRAPH_GPCX_GPCCS_RED_SWITCH_UNK11 + or $r15 NV_PGRAPH_GPCX_GPCCS_RED_SWITCH_ENABLE + nv_iowr(NV_PGRAPH_GPCX_GPCCS_RED_SWITCH, 0, $r15) ret // Transfer GPC context data between GPU and storage area @@ -317,46 +300,37 @@ ctx_redswitch: // ctx_xfer: // set context base address - mov $r1 0xa04 - shl b32 $r1 6 - iowr I[$r1 + 0x000] $r15// MEM_BASE + nv_iowr(NV_PGRAPH_GPCX_GPCCS_MEM_BASE, 0, $r15) bra not $p1 #ctx_xfer_not_load - call #ctx_redswitch + call(ctx_redswitch) ctx_xfer_not_load: // strands - mov $r1 0x4afc - sethi $r1 0x20000 - mov $r2 0xc - iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0c - call #strand_wait - mov $r2 0x47fc - sethi $r2 0x20000 - iowr I[$r2] $r0 // STRAND_FIRST_GENE(0x3f) = 0x00 - xbit $r2 $flags $p1 - add b32 $r2 3 - iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x03/0x04 (SAVE/LOAD) + call(strand_pre) + clear b32 $r2 + nv_iowr(NV_PGRAPH_GPCX_GPCCS_STRAND_SELECT, 0x3f, $r2) + xbit $r2 $flags $p1 // SAVE/LOAD + add b32 $r2 NV_PGRAPH_GPCX_GPCCS_STRAND_CMD_SAVE + nv_iowr(NV_PGRAPH_GPCX_GPCCS_STRAND_CMD, 0x3f, $r2) // mmio context xbit $r10 $flags $p1 // direction or $r10 2 // first - mov $r11 0x0000 - sethi $r11 0x500000 + imm32($r11,0x500000) ld b32 $r12 D[$r0 + #gpc_id] shl b32 $r12 15 add b32 $r11 $r12 // base = NV_PGRAPH_GPCn ld b32 $r12 D[$r0 + #gpc_mmio_list_head] ld b32 $r13 D[$r0 + #gpc_mmio_list_tail] mov $r14 0 // not multi - call #mmctx_xfer + call(mmctx_xfer) // per-TPC mmio context xbit $r10 $flags $p1 // direction #if !NV_PGRAPH_GPCX_UNK__SIZE or $r10 4 // last #endif - mov $r11 0x4000 - sethi $r11 0x500000 // base = NV_PGRAPH_GPC0_TPC0 + imm32($r11, 0x504000) ld b32 $r12 D[$r0 + #gpc_id] shl b32 $r12 15 add b32 $r11 $r12 // base = NV_PGRAPH_GPCn_TPC0 @@ -364,14 +338,13 @@ ctx_xfer: ld b32 $r13 D[$r0 + #tpc_mmio_list_tail] ld b32 $r15 D[$r0 + #tpc_mask] mov $r14 0x800 // stride = 0x800 - call #mmctx_xfer + call(mmctx_xfer) #if NV_PGRAPH_GPCX_UNK__SIZE > 0 // per-UNK mmio context xbit $r10 $flags $p1 // direction or $r10 4 // last - mov $r11 0x3000 - sethi $r11 0x500000 // base = NV_PGRAPH_GPC0_UNK0 + imm32($r11, 0x503000) ld b32 $r12 D[$r0 + #gpc_id] shl b32 $r12 15 add b32 $r11 $r12 // base = NV_PGRAPH_GPCn_UNK0 @@ -379,11 +352,11 @@ ctx_xfer: ld b32 $r13 D[$r0 + #unk_mmio_list_tail] ld b32 $r15 D[$r0 + #unk_mask] mov $r14 0x200 // stride = 0x200 - call #mmctx_xfer + call(mmctx_xfer) #endif // wait for strands to finish - call #strand_wait + call(strand_wait) // if load, or a save without a load following, do some // unknown stuff that's done after finishing a block of @@ -391,14 +364,10 @@ ctx_xfer: bra $p1 #ctx_xfer_post bra not $p2 #ctx_xfer_done ctx_xfer_post: - mov $r1 0x4afc - sethi $r1 0x20000 - mov $r2 0xd - iowr I[$r1] $r2 // STRAND_CMD(0x3f) = 0x0d - call #strand_wait + call(strand_post) // mark completion in HUB's barrier ctx_xfer_done: - call #hub_barrier_done + call(hub_barrier_done) ret #endif |