1 files changed, 125 insertions, 24 deletions

diff --git a/drivers/gpu/drm/pl111/pl111_drv.c b/drivers/gpu/drm/pl111/pl111_drv.c
index 581c452cede1..201d57d5cb54 100644
--- a/drivers/gpu/drm/pl111/pl111_drv.c
+++ b/drivers/gpu/drm/pl111/pl111_drv.c
@@ -41,9 +41,6 @@
  * - Fix race between setting plane base address and getting IRQ for
  *   vsync firing the pageflip completion.
  *
- * - Expose the correct set of formats we can support based on the
- *   "arm,pl11x,tft-r0g0b0-pads" DT property.
- *
  * - Use the "max-memory-bandwidth" DT property to filter the
  *   supported formats.
  *
@@ -68,8 +65,12 @@
 #include <drm/drm_gem_cma_helper.h>
 #include <drm/drm_gem_framebuffer_helper.h>
 #include <drm/drm_fb_cma_helper.h>
+#include <drm/drm_of.h>
+#include <drm/drm_bridge.h>
+#include <drm/drm_panel.h>
 
 #include "pl111_drm.h"
+#include "pl111_versatile.h"
 
 #define DRIVER_DESC      "DRM module for PL111"
 
@@ -83,6 +84,8 @@ static int pl111_modeset_init(struct drm_device *dev)
 {
 	struct drm_mode_config *mode_config;
 	struct pl111_drm_dev_private *priv = dev->dev_private;
+	struct drm_panel *panel;
+	struct drm_bridge *bridge;
 	int ret = 0;
 
 	drm_mode_config_init(dev);
@@ -93,34 +96,43 @@ static int pl111_modeset_init(struct drm_device *dev)
 	mode_config->min_height = 1;
 	mode_config->max_height = 768;
 
-	ret = pl111_connector_init(dev);
-	if (ret) {
-		dev_err(dev->dev, "Failed to create pl111_drm_connector\n");
-		goto out_config;
-	}
-
-	/* Don't actually attach if we didn't find a drm_panel
-	 * attached to us.  This will allow a kernel to include both
-	 * the fbdev pl111 driver and this one, and choose between
-	 * them based on which subsystem has support for the panel.
-	 */
-	if (!priv->connector.panel) {
-		dev_info(dev->dev,
-			 "Disabling due to lack of DRM panel device.\n");
-		ret = -ENODEV;
-		goto out_config;
+	ret = drm_of_find_panel_or_bridge(dev->dev->of_node,
+					  0, 0, &panel, &bridge);
+	if (ret && ret != -ENODEV)
+		return ret;
+	if (panel) {
+		bridge = drm_panel_bridge_add(panel,
+					      DRM_MODE_CONNECTOR_Unknown);
+		if (IS_ERR(bridge)) {
+			ret = PTR_ERR(bridge);
+			goto out_config;
+		}
+		/*
+		 * TODO: when we are using a different bridge than a panel
+		 * (such as a dumb VGA connector) we need to devise a different
+		 * method to get the connector out of the bridge.
+		 */
 	}
 
 	ret = pl111_display_init(dev);
 	if (ret != 0) {
 		dev_err(dev->dev, "Failed to init display\n");
-		goto out_config;
+		goto out_bridge;
 	}
 
+	ret = drm_simple_display_pipe_attach_bridge(&priv->pipe,
+						    bridge);
+	if (ret)
+		return ret;
+
+	priv->bridge = bridge;
+	priv->panel = panel;
+	priv->connector = panel->connector;
+
 	ret = drm_vblank_init(dev, 1);
 	if (ret != 0) {
 		dev_err(dev->dev, "Failed to init vblank\n");
-		goto out_config;
+		goto out_bridge;
 	}
 
 	drm_mode_config_reset(dev);
@@ -132,6 +144,9 @@ static int pl111_modeset_init(struct drm_device *dev)
 
 	goto finish;
 
+out_bridge:
+	if (panel)
+		drm_panel_bridge_remove(bridge);
 out_config:
 	drm_mode_config_cleanup(dev);
 finish:
@@ -183,6 +198,7 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
 {
 	struct device *dev = &amba_dev->dev;
 	struct pl111_drm_dev_private *priv;
+	struct pl111_variant_data *variant = id->data;
 	struct drm_device *drm;
 	int ret;
 
@@ -196,6 +212,33 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
 	amba_set_drvdata(amba_dev, drm);
 	priv->drm = drm;
 	drm->dev_private = priv;
+	priv->variant = variant;
+
+	/*
+	 * The PL110 and PL111 variants have two registers
+	 * swapped: interrupt enable and control. For this reason
+	 * we use offsets that we can change per variant.
+	 */
+	if (variant->is_pl110) {
+		/*
+		 * The ARM Versatile boards are even more special:
+		 * their PrimeCell ID say they are PL110 but the
+		 * control and interrupt enable registers are anyway
+		 * swapped to the PL111 order so they are not following
+		 * the PL110 datasheet.
+		 */
+		if (of_machine_is_compatible("arm,versatile-ab") ||
+		    of_machine_is_compatible("arm,versatile-pb")) {
+			priv->ienb = CLCD_PL111_IENB;
+			priv->ctrl = CLCD_PL111_CNTL;
+		} else {
+			priv->ienb = CLCD_PL110_IENB;
+			priv->ctrl = CLCD_PL110_CNTL;
+		}
+	} else {
+		priv->ienb = CLCD_PL111_IENB;
+		priv->ctrl = CLCD_PL111_CNTL;
+	}
 
 	priv->regs = devm_ioremap_resource(dev, &amba_dev->res);
 	if (IS_ERR(priv->regs)) {
@@ -204,15 +247,19 @@ static int pl111_amba_probe(struct amba_device *amba_dev,
 	}
 
 	/* turn off interrupts before requesting the irq */
-	writel(0, priv->regs + CLCD_PL111_IENB);
+	writel(0, priv->regs + priv->ienb);
 
 	ret = devm_request_irq(dev, amba_dev->irq[0], pl111_irq, 0,
-			       "pl111", priv);
+			       variant->name, priv);
 	if (ret != 0) {
 		dev_err(dev, "%s failed irq %d\n", __func__, ret);
 		return ret;
 	}
 
+	ret = pl111_versatile_init(dev, priv);
+	if (ret)
+		goto dev_unref;
+
 	ret = pl111_modeset_init(drm);
 	if (ret != 0)
 		goto dev_unref;
@@ -236,16 +283,70 @@ static int pl111_amba_remove(struct amba_device *amba_dev)
 	drm_dev_unregister(drm);
 	if (priv->fbdev)
 		drm_fbdev_cma_fini(priv->fbdev);
+	if (priv->panel)
+		drm_panel_bridge_remove(priv->bridge);
 	drm_mode_config_cleanup(drm);
 	drm_dev_unref(drm);
 
 	return 0;
 }
 
-static struct amba_id pl111_id_table[] = {
+/*
+ * This variant exist in early versions like the ARM Integrator
+ * and this version lacks the 565 and 444 pixel formats.
+ */
+static const u32 pl110_pixel_formats[] = {
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_ABGR1555,
+	DRM_FORMAT_XBGR1555,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+};
+
+static const struct pl111_variant_data pl110_variant = {
+	.name = "PL110",
+	.is_pl110 = true,
+	.formats = pl110_pixel_formats,
+	.nformats = ARRAY_SIZE(pl110_pixel_formats),
+};
+
+/* RealView, Versatile Express etc use this modern variant */
+static const u32 pl111_pixel_formats[] = {
+	DRM_FORMAT_ABGR8888,
+	DRM_FORMAT_XBGR8888,
+	DRM_FORMAT_ARGB8888,
+	DRM_FORMAT_XRGB8888,
+	DRM_FORMAT_BGR565,
+	DRM_FORMAT_RGB565,
+	DRM_FORMAT_ABGR1555,
+	DRM_FORMAT_XBGR1555,
+	DRM_FORMAT_ARGB1555,
+	DRM_FORMAT_XRGB1555,
+	DRM_FORMAT_ABGR4444,
+	DRM_FORMAT_XBGR4444,
+	DRM_FORMAT_ARGB4444,
+	DRM_FORMAT_XRGB4444,
+};
+
+static const struct pl111_variant_data pl111_variant = {
+	.name = "PL111",
+	.formats = pl111_pixel_formats,
+	.nformats = ARRAY_SIZE(pl111_pixel_formats),
+};
+
+static const struct amba_id pl111_id_table[] = {
+	{
+		.id = 0x00041110,
+		.mask = 0x000fffff,
+		.data = (void*)&pl110_variant,
+	},
 	{
 		.id = 0x00041111,
 		.mask = 0x000fffff,
+		.data = (void*)&pl111_variant,
 	},
 	{0, 0},
 };