diff options
Diffstat (limited to 'drivers/hwmon/Kconfig')
| -rw-r--r-- | drivers/hwmon/Kconfig | 430 |
1 files changed, 398 insertions, 32 deletions
diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index 47ac20aee06f..7ac3daaf59ce 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -38,19 +38,6 @@ config HWMON_DEBUG_CHIP comment "Native drivers" -config SENSORS_AB8500 - tristate "AB8500 thermal monitoring" - depends on AB8500_GPADC && AB8500_BM && (IIO = y) - default n - help - If you say yes here you get support for the thermal sensor part - of the AB8500 chip. The driver includes thermal management for - AB8500 die and two GPADC channels. The GPADC channel are preferably - used to access sensors outside the AB8500 chip. - - This driver can also be built as a module. If so, the module - will be called abx500-temp. - config SENSORS_ABITUGURU tristate "Abit uGuru (rev 1 & 2)" depends on X86 && DMI @@ -113,6 +100,7 @@ config SENSORS_AD7418 config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C + depends on SENSORS_LM90=n help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, @@ -187,6 +175,7 @@ config SENSORS_ADM9240 config SENSORS_ADT7X10 tristate + select REGMAP help This module contains common code shared by the ADT7310/ADT7320 and ADT7410/ADT7420 temperature monitoring chip drivers. @@ -257,6 +246,29 @@ config SENSORS_ADT7475 This driver can also be built as a module. If so, the module will be called adt7475. +config SENSORS_AHT10 + tristate "Aosong AHT10" + depends on I2C + help + If you say yes here, you get support for the Aosong AHT10 + temperature and humidity sensors + + This driver can also be built as a module. If so, the module + will be called aht10. + +config SENSORS_AQUACOMPUTER_D5NEXT + tristate "Aquacomputer D5 Next, Octo, Quadro, Farbwerk, Farbwerk 360, High Flow Next" + depends on USB_HID + select CRC16 + help + If you say yes here you get support for sensors and fans of + the Aquacomputer D5 Next watercooling pump, Octo and Quadro fan + controllers, Farbwerk and Farbwerk 360 RGB controllers, High Flow + Next sensor, where available. + + This driver can also be built as a module. If so, the module + will be called aquacomputer_d5next. + config SENSORS_AS370 tristate "Synaptics AS370 SoC hardware monitoring driver" help @@ -280,6 +292,15 @@ config SENSORS_ASC7621 This driver can also be built as a module. If so, the module will be called asc7621. +config SENSORS_AXI_FAN_CONTROL + tristate "Analog Devices FAN Control HDL Core driver" + help + If you say yes here you get support for the Analog Devices + AXI HDL FAN monitoring core. + + This driver can also be built as a module. If so, the module + will be called axi-fan-control + config SENSORS_K8TEMP tristate "AMD Athlon64/FX or Opteron temperature sensor" depends on X86 && PCI @@ -361,7 +382,7 @@ config SENSORS_ARM_SCPI config SENSORS_ASB100 tristate "Asus ASB100 Bach" - depends on X86 && I2C + depends on (X86 || COMPILE_TEST) && I2C select HWMON_VID help If you say yes here you get support for the ASB100 Bach sensor @@ -372,6 +393,7 @@ config SENSORS_ASB100 config SENSORS_ASPEED tristate "ASPEED AST2400/AST2500 PWM and Fan tach driver" + depends on ARCH_ASPEED || COMPILE_TEST depends on THERMAL || THERMAL=n select REGMAP help @@ -395,6 +417,55 @@ config SENSORS_ATXP1 This driver can also be built as a module. If so, the module will be called atxp1. +config SENSORS_BT1_PVT + tristate "Baikal-T1 Process, Voltage, Temperature sensor driver" + depends on MIPS_BAIKAL_T1 || COMPILE_TEST + select POLYNOMIAL + help + If you say yes here you get support for Baikal-T1 PVT sensor + embedded into the SoC. + + This driver can also be built as a module. If so, the module will be + called bt1-pvt. + +config SENSORS_BT1_PVT_ALARMS + bool "Enable Baikal-T1 PVT sensor alarms" + depends on SENSORS_BT1_PVT + help + Baikal-T1 PVT IP-block provides threshold registers for each + supported sensor. But the corresponding interrupts might be + generated by the thresholds comparator only in synchronization with + a data conversion. Additionally there is only one sensor data can + be converted at a time. All of these makes the interface impossible + to be used for the hwmon alarms implementation without periodic + switch between the PVT sensors. By default the data conversion is + performed on demand from the user-space. If this config is enabled + the data conversion will be periodically performed and the data will be + saved in the internal driver cache. + +config SENSORS_CORSAIR_CPRO + tristate "Corsair Commander Pro controller" + depends on HID + help + If you say yes here you get support for the Corsair Commander Pro + controller. + + This driver can also be built as a module. If so, the module + will be called corsair-cpro. + +config SENSORS_CORSAIR_PSU + tristate "Corsair PSU HID controller" + depends on HID + help + If you say yes here you get support for Corsair PSUs with a HID + interface. + Currently this driver supports the (RM/HX)550i, (RM/HX)650i, + (RM/HX)750i, (RM/HX)850i, (RM/HX)1000i and HX1200i power supplies + by Corsair. + + This driver can also be built as a module. If so, the module + will be called corsair-psu. + config SENSORS_DRIVETEMP tristate "Hard disk drives with temperature sensors" depends on SCSI && ATA @@ -403,7 +474,7 @@ config SENSORS_DRIVETEMP hard disk drives. This driver can also be built as a module. If so, the module - will be called satatemp. + will be called drivetemp. config SENSORS_DS620 tristate "Dallas Semiconductor DS620" @@ -433,6 +504,7 @@ config SENSORS_DS1621 config SENSORS_DELL_SMM tristate "Dell laptop SMM BIOS hwmon driver" depends on X86 + imply THERMAL help This hwmon driver adds support for reporting temperature of different sensors and controls the fans on Dell laptops via System Management @@ -441,6 +513,21 @@ config SENSORS_DELL_SMM When option I8K is also enabled this driver provides legacy /proc/i8k userspace interface for i8kutils package. +config I8K + bool "Legacy /proc/i8k interface of Dell laptop SMM BIOS hwmon driver" + depends on SENSORS_DELL_SMM + depends on PROC_FS + help + This option enables the legacy /proc/i8k userspace interface of the + dell-smm-hwmon driver. The character file /proc/i8k exposes the BIOS + version, temperatures and allows control of fan speeds of some Dell + laptops. Sometimes it also reports power and hotkey status. + + This interface is required to run programs from the i8kutils package. + + Say Y if you intend to run userspace programs that use this interface. + Say N otherwise. + config SENSORS_DA9052_ADC tristate "Dialog DA9052/DA9053 ADC" depends on PMIC_DA9052 @@ -471,6 +558,16 @@ config SENSORS_I5K_AMB This driver can also be built as a module. If so, the module will be called i5k_amb. +config SENSORS_SPARX5 + tristate "Sparx5 SoC temperature sensor" + depends on ARCH_SPARX5 || COMPILE_TEST + help + If you say yes here you get support for temperature monitoring + with the Microchip Sparx5 SoC. + + This driver can also be built as a module. If so, the module + will be called sparx5-temp. + config SENSORS_F71805F tristate "Fintek F71805F/FG, F71806F/FG and F71872F/FG" depends on !PPC @@ -514,6 +611,15 @@ config SENSORS_F75375S This driver can also be built as a module. If so, the module will be called f75375s. +config SENSORS_GSC + tristate "Gateworks System Controller ADC" + depends on MFD_GATEWORKS_GSC + help + Support for the Gateworks System Controller A/D converters. + + To compile this driver as a module, choose M here: + the module will be called gsc-hwmon. + config SENSORS_MC13783_ADC tristate "Freescale MC13783/MC13892 ADC" depends on MFD_MC13XXX @@ -522,7 +628,7 @@ config SENSORS_MC13783_ADC config SENSORS_FSCHMD tristate "Fujitsu Siemens Computers sensor chips" - depends on X86 && I2C + depends on (X86 || COMPILE_TEST) && I2C help If you say yes here you get support for the following Fujitsu Siemens Computers (FSC) sensor chips: Poseidon, Scylla, Hermes, @@ -715,6 +821,18 @@ config SENSORS_POWR1220 This driver can also be built as a module. If so, the module will be called powr1220. +config SENSORS_LAN966X + tristate "Microchip LAN966x Hardware Monitoring" + depends on SOC_LAN966 || COMPILE_TEST + select REGMAP + select POLYNOMIAL + help + If you say yes here you get support for temperature monitoring + on the Microchip LAN966x SoC. + + This driver can also be built as a module. If so, the module + will be called lan966x-hwmon. + config SENSORS_LINEAGE tristate "Lineage Compact Power Line Power Entry Module" depends on I2C @@ -785,6 +903,18 @@ config SENSORS_LTC2990 This driver can also be built as a module. If so, the module will be called ltc2990. +config SENSORS_LTC2992 + tristate "Linear Technology LTC2992" + depends on I2C + depends on GPIOLIB + help + If you say yes here you get support for Linear Technology LTC2992 + I2C System Monitor. The LTC2992 measures current, voltage, and + power of two supplies. + + This driver can also be built as a module. If so, the module will + be called ltc2992. + config SENSORS_LTC4151 tristate "Linear Technology LTC4151" depends on I2C @@ -849,7 +979,7 @@ config SENSORS_LTC4261 config SENSORS_LTQ_CPUTEMP bool "Lantiq cpu temperature sensor driver" - depends on LANTIQ + depends on SOC_XWAY help If you say yes here you get support for the temperature sensor inside your CPU. @@ -864,6 +994,15 @@ config SENSORS_MAX1111 This driver can also be built as a module. If so, the module will be called max1111. +config SENSORS_MAX127 + tristate "Maxim MAX127 12-bit 8-channel Data Acquisition System" + depends on I2C + help + Say y here to support Maxim's MAX127 DAS chips. + + This driver can also be built as a module. If so, the module + will be called max127. + config SENSORS_MAX16065 tristate "Maxim MAX16065 System Manager and compatibles" depends on I2C @@ -928,6 +1067,28 @@ config SENSORS_MAX31730 This driver can also be built as a module. If so, the module will be called max31730. +config SENSORS_MAX31760 + tristate "MAX31760 fan speed controller" + depends on I2C + select REGMAP_I2C + help + Support for the Analog Devices MAX31760 Precision Fan-Speed + Controller. MAX31760 integrates temperature sensing along with + precision PWM fan control. + + This driver can also be built as a module. If so, the module + will be called max31760. + +config SENSORS_MAX6620 + tristate "Maxim MAX6620 fan controller" + depends on I2C + help + If you say yes here you get support for the MAX6620 + fan controller. + + This driver can also be built as a module. If so, the module + will be called max6620. + config SENSORS_MAX6621 tristate "Maxim MAX6621 sensor chip" depends on I2C @@ -955,6 +1116,7 @@ config SENSORS_MAX6639 config SENSORS_MAX6642 tristate "Maxim MAX6642 sensor chip" depends on I2C + depends on SENSORS_LM90=n help If you say yes here you get support for MAX6642 sensor chip. MAX6642 is a SMBus-Compatible Remote/Local Temperature Sensor @@ -1007,7 +1169,7 @@ config SENSORS_MCP3021 will be called mcp3021. config SENSORS_MLXREG_FAN - tristate "Mellanox Mellanox FAN driver" + tristate "Mellanox FAN driver" depends on MELLANOX_PLATFORM imply THERMAL select REGMAP @@ -1029,6 +1191,17 @@ config SENSORS_TC654 This driver can also be built as a module. If so, the module will be called tc654. +config SENSORS_TPS23861 + tristate "Texas Instruments TPS23861 PoE PSE" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments + TPS23861 802.3at PoE PSE chips. + + This driver can also be built as a module. If so, the module + will be called tps23861. + config SENSORS_MENF21BMC_HWMON tristate "MEN 14F021P00 BMC Hardware Monitoring" depends on MFD_MENF21BMC @@ -1039,6 +1212,16 @@ config SENSORS_MENF21BMC_HWMON This driver can also be built as a module. If so the module will be called menf21bmc_hwmon. +config SENSORS_MR75203 + tristate "Moortec Semiconductor MR75203 PVT Controller" + select REGMAP_MMIO + help + If you say yes here you get support for Moortec MR75203 + PVT controller. + + This driver can also be built as a module. If so, the module + will be called mr75203. + config SENSORS_ADCXX tristate "National Semiconductor ADCxxxSxxx" depends on SPI_MASTER @@ -1073,8 +1256,8 @@ config SENSORS_LM70 depends on SPI_MASTER help If you say yes here you get support for the National Semiconductor - LM70, LM71, LM74 and Texas Instruments TMP121/TMP123 digital tempera- - ture sensor chips. + LM70, LM71, LM74 and Texas Instruments TMP121/TMP123, TMP122/TMP124, + TMP125 digital temperature sensor chips. This driver can also be built as a module. If so, the module will be called lm70. @@ -1097,6 +1280,7 @@ config SENSORS_LM75 temperature sensor chip, with models including: - Analog Devices ADT75 + - Atmel (now Microchip) AT30TS74 - Dallas Semiconductor DS75, DS1775 and DS7505 - Global Mixed-mode Technology (GMT) G751 - Maxim MAX6625 and MAX6626 @@ -1153,6 +1337,7 @@ config SENSORS_LM80 config SENSORS_LM83 tristate "National Semiconductor LM83 and compatibles" depends on I2C + select REGMAP help If you say yes here you get support for National Semiconductor LM82 and LM83 sensor chips. @@ -1187,12 +1372,16 @@ config SENSORS_LM90 tristate "National Semiconductor LM90 and compatibles" depends on I2C help - If you say yes here you get support for National Semiconductor LM90, - LM86, LM89 and LM99, Analog Devices ADM1032, ADT7461, and ADT7461A, - Maxim MAX6646, MAX6647, MAX6648, MAX6649, MAX6657, MAX6658, MAX6659, - MAX6680, MAX6681, MAX6692, MAX6695, MAX6696, ON Semiconductor NCT1008, - Winbond/Nuvoton W83L771W/G/AWG/ASG, Philips SA56004, GMT G781, and - Texas Instruments TMP451 sensor chips. + If you say yes here you get support for National Semiconductor LM84, + LM90, LM86, LM89 and LM99, Analog Devices ADM1020, ADM2021, ADM1021A, + ADM1023, ADM1032, ADT7461, ADT7461A, ADT7481, ADT7482, and ADT7483A, + Maxim MAX1617, MAX6642, MAX6646, MAX6647, MAX6648, MAX6649, MAX6654, + MAX6657, MAX6658, MAX6659, MAX6680, MAX6681, MAX6692, MAX6695, + MAX6696, + ON Semiconductor NCT1008, NCT210, NCT72, NCT214, NCT218, + Winbond/Nuvoton W83L771W/G/AWG/ASG, + Philips NE1618, SA56004, GMT G781, Texas Instruments TMP451 and TMP461 + sensor chips. This driver can also be built as a module. If so, the module will be called lm90. @@ -1278,8 +1467,8 @@ config SENSORS_PC87427 will be called pc87427. config SENSORS_NTC_THERMISTOR - tristate "NTC thermistor support from Murata" - depends on !OF || IIO=n || IIO + tristate "NTC thermistor support" + depends on IIO depends on THERMAL || !THERMAL_OF help This driver supports NTC thermistors sensor reading and its @@ -1304,10 +1493,23 @@ config SENSORS_NCT6683 This driver can also be built as a module. If so, the module will be called nct6683. +config SENSORS_NCT6775_CORE + tristate + select REGMAP + help + This module contains common code shared by the platform and + i2c versions of the nct6775 driver; it is not useful on its + own. + + If built as a module, the module will be called + nct6775-core. + config SENSORS_NCT6775 - tristate "Nuvoton NCT6775F and compatibles" + tristate "Platform driver for Nuvoton NCT6775F and compatibles" depends on !PPC + depends on ACPI_WMI || ACPI_WMI=n select HWMON_VID + select SENSORS_NCT6775_CORE help If you say yes here you get support for the hardware monitoring functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, @@ -1318,6 +1520,23 @@ config SENSORS_NCT6775 This driver can also be built as a module. If so, the module will be called nct6775. +config SENSORS_NCT6775_I2C + tristate "I2C driver for Nuvoton NCT6775F and compatibles" + depends on I2C + select REGMAP_I2C + select SENSORS_NCT6775_CORE + help + If you say yes here you get support for the hardware monitoring + functionality of the Nuvoton NCT6106D, NCT6775F, NCT6776F, NCT6779D, + NCT6791D, NCT6792D, NCT6793D, NCT6795D, NCT6796D, and compatible + Super-I/O chips via their I2C interface. + + If you're not building a kernel for a BMC, this is probably + not the driver you want (see CONFIG_SENSORS_NCT6775). + + This driver can also be built as a module. If so, the module + will be called nct6775-i2c. + config SENSORS_NCT7802 tristate "Nuvoton NCT7802Y" depends on I2C @@ -1331,10 +1550,12 @@ config SENSORS_NCT7802 config SENSORS_NCT7904 tristate "Nuvoton NCT7904" - depends on I2C + depends on I2C && WATCHDOG + select WATCHDOG_CORE help If you say yes here you get support for the Nuvoton NCT7904 - hardware monitoring chip, including manual fan speed control. + hardware monitoring chip, including manual fan speed control + and support for the integrated watchdog. This driver can also be built as a module. If so, the module will be called nct7904. @@ -1364,6 +1585,26 @@ config SENSORS_NSA320 This driver can also be built as a module. If so, the module will be called nsa320-hwmon. +config SENSORS_NZXT_KRAKEN2 + tristate "NZXT Kraken X42/X51/X62/X72 liquid coolers" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT Kraken X42/X52/X62/X72 all-in-one CPU liquid coolers. + + This driver can also be built as a module. If so, the module + will be called nzxt-kraken2. + +config SENSORS_NZXT_SMART2 + tristate "NZXT RGB & Fan Controller/Smart Device v2" + depends on USB_HID + help + If you say yes here you get support for hardware monitoring for the + NZXT RGB & Fan Controller/Smart Device v2. + + This driver can also be built as a module. If so, the module + will be called nzxt-smart2. + source "drivers/hwmon/occ/Kconfig" config SENSORS_PCF8591 @@ -1379,6 +1620,8 @@ config SENSORS_PCF8591 These devices are hard to detect and rarely found on mainstream hardware. If unsure, say N. +source "drivers/hwmon/peci/Kconfig" + source "drivers/hwmon/pmbus/Kconfig" config SENSORS_PWM_FAN @@ -1403,6 +1646,36 @@ config SENSORS_RASPBERRYPI_HWMON This driver can also be built as a module. If so, the module will be called raspberrypi-hwmon. +config SENSORS_SL28CPLD + tristate "Kontron sl28cpld hardware monitoring driver" + depends on MFD_SL28CPLD || COMPILE_TEST + help + If you say yes here you get support for the fan supervisor of the + sl28cpld board management controller. + + This driver can also be built as a module. If so, the module + will be called sl28cpld-hwmon. + +config SENSORS_SBTSI + tristate "Emulated SB-TSI temperature sensor" + depends on I2C + help + If you say yes here you get support for emulated temperature + sensors on AMD SoCs with SB-TSI interface connected to a BMC device. + + This driver can also be built as a module. If so, the module will + be called sbtsi_temp. + +config SENSORS_SBRMI + tristate "Emulated SB-RMI sensor" + depends on I2C + help + If you say yes here you get support for emulated RMI + sensors on AMD SoCs with APML interface connected to a BMC device. + + This driver can also be built as a module. If so, the module will + be called sbrmi. + config SENSORS_SHT15 tristate "Sensiron humidity and temperature sensors. SHT15 and compat." depends on GPIOLIB || COMPILE_TEST @@ -1435,6 +1708,17 @@ config SENSORS_SHT3x This driver can also be built as a module. If so, the module will be called sht3x. +config SENSORS_SHT4x + tristate "Sensiron humidity and temperature sensors. SHT4x and compat." + depends on I2C + select CRC8 + help + If you say yes here you get support for the Sensiron SHT40, SHT41 and + SHT45 humidity and temperature sensors. + + This driver can also be built as a module. If so, the module + will be called sht4x. + config SENSORS_SHTC1 tristate "Sensiron humidity and temperature sensors. SHTC1 and compat." depends on I2C @@ -1472,6 +1756,16 @@ config SENSORS_SIS5595 This driver can also be built as a module. If so, the module will be called sis5595. +config SENSORS_SY7636A + tristate "Silergy SY7636A" + depends on MFD_SY7636A + help + If you say yes here you get support for the thermistor readout of + the Silergy SY7636A PMIC. + + This driver can also be built as a module. If so, the module + will be called sy7636a-hwmon. + config SENSORS_DME1737 tristate "SMSC DME1737, SCH311x and compatibles" depends on I2C && !PPC @@ -1505,6 +1799,19 @@ config SENSORS_EMC2103 This driver can also be built as a module. If so, the module will be called emc2103. +config SENSORS_EMC2305 + tristate "Microchip EMC2305 and compatible EMC2301/2/3" + depends on I2C + imply THERMAL + help + If you say yes here you get support for the Microchip EMC2305 + fan controller chips. + The Microchip EMC2305 is a fan controller for up to 5 fans. + Fan rotation speeds are reported in RPM. + + This driver can also be built as a module. If so, the module + will be called emc2305. + config SENSORS_EMC6W201 tristate "SMSC EMC6W201" depends on I2C @@ -1682,6 +1989,18 @@ config SENSORS_INA2XX This driver can also be built as a module. If so, the module will be called ina2xx. +config SENSORS_INA238 + tristate "Texas Instruments INA238" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the INA238 power monitor + chip. This driver supports voltage, current, power and temperature + measurements as well as alarm configuration. + + This driver can also be built as a module. If so, the module + will be called ina238. + config SENSORS_INA3221 tristate "Texas Instruments INA3221 Triple Power Monitor" depends on I2C @@ -1749,9 +2068,10 @@ config SENSORS_TMP108 config SENSORS_TMP401 tristate "Texas Instruments TMP401 and compatibles" depends on I2C + select REGMAP help If you say yes here you get support for Texas Instruments TMP401, - TMP411, TMP431, TMP432, TMP435, and TMP461 temperature sensor chips. + TMP411, TMP431, TMP432, and TMP435 temperature sensor chips. This driver can also be built as a module. If so, the module will be called tmp401. @@ -1766,6 +2086,17 @@ config SENSORS_TMP421 This driver can also be built as a module. If so, the module will be called tmp421. +config SENSORS_TMP464 + tristate "Texas Instruments TMP464 and compatible" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for Texas Instruments TMP464 + and TMP468 temperature sensor chips. + + This driver can also be built as a module. If so, the module + will be called tmp464. + config SENSORS_TMP513 tristate "Texas Instruments TMP513 and compatibles" depends on I2C @@ -1988,6 +2319,17 @@ config SENSORS_XGENE If you say yes here you get support for the temperature and power sensors for APM X-Gene SoC. +config SENSORS_INTEL_M10_BMC_HWMON + tristate "Intel MAX10 BMC Hardware Monitoring" + depends on MFD_INTEL_M10_BMC + help + This driver provides support for the hardware monitoring functionality + on Intel MAX10 BMC chip. + + This BMC Chip is used on Intel FPGA PCIe Acceleration Cards (PAC). Its + sensors monitor various telemetry data of different components on the + card, e.g. board temperature, FPGA core temperature/voltage/current. + if ACPI comment "ACPI drivers" @@ -2014,6 +2356,30 @@ config SENSORS_ATK0110 This driver can also be built as a module. If so, the module will be called asus_atk0110. +config SENSORS_ASUS_WMI + tristate "ASUS WMI X370/X470/B450/X399" + depends on ACPI_WMI + help + If you say yes here you get support for the ACPI hardware monitoring + interface found in X370/X470/B450/X399 ASUS motherboards. This driver + will provide readings of fans, voltages and temperatures through the system + firmware. + + This driver can also be built as a module. If so, the module + will be called asus_wmi_sensors. + +config SENSORS_ASUS_EC + tristate "ASUS EC Sensors" + depends on X86 + help + If you say yes here you get support for the ACPI embedded controller + hardware monitoring interface found in ASUS motherboards. The driver + currently supports B550/X570 boards, although other ASUS boards might + provide this monitoring interface as well. + + This driver can also be built as a module. If so, the module + will be called asus_ec_sensors. + endif # ACPI endif # HWMON |