1 files changed, 115 insertions, 17 deletions

diff --git a/drivers/hwmon/lis3lv02d_i2c.c b/drivers/hwmon/lis3lv02d_i2c.c
index 8e5933b72d19..9f4bae07f719 100644
--- a/drivers/hwmon/lis3lv02d_i2c.c
+++ b/drivers/hwmon/lis3lv02d_i2c.c
@@ -29,10 +29,30 @@
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
+#include <linux/pm_runtime.h>
+#include <linux/delay.h>
 #include "lis3lv02d.h"
 
 #define DRV_NAME 	"lis3lv02d_i2c"
 
+static const char reg_vdd[]    = "Vdd";
+static const char reg_vdd_io[] = "Vdd_IO";
+
+static int lis3_reg_ctrl(struct lis3lv02d *lis3, bool state)
+{
+	int ret;
+	if (state == LIS3_REG_OFF) {
+		ret = regulator_bulk_disable(ARRAY_SIZE(lis3->regulators),
+					lis3->regulators);
+	} else {
+		ret = regulator_bulk_enable(ARRAY_SIZE(lis3->regulators),
+					lis3->regulators);
+		/* Chip needs time to wakeup. Not mentioned in datasheet */
+		usleep_range(10000, 20000);
+	}
+	return ret;
+}
+
 static inline s32 lis3_i2c_write(struct lis3lv02d *lis3, int reg, u8 value)
 {
 	struct i2c_client *c = lis3->bus_priv;
@@ -46,24 +66,38 @@ static inline s32 lis3_i2c_read(struct lis3lv02d *lis3, int reg, u8 *v)
 	return 0;
 }
 
+static inline s32 lis3_i2c_blockread(struct lis3lv02d *lis3, int reg, int len,
+				u8 *v)
+{
+	struct i2c_client *c = lis3->bus_priv;
+	reg |= (1 << 7); /* 7th bit enables address auto incrementation */
+	return i2c_smbus_read_i2c_block_data(c, reg, len, v);
+}
+
 static int lis3_i2c_init(struct lis3lv02d *lis3)
 {
 	u8 reg;
 	int ret;
 
+	if (lis3->reg_ctrl)
+		lis3_reg_ctrl(lis3, LIS3_REG_ON);
+
+	lis3->read(lis3, WHO_AM_I, &reg);
+	if (reg != lis3->whoami)
+		printk(KERN_ERR "lis3: power on failure\n");
+
 	/* power up the device */
 	ret = lis3->read(lis3, CTRL_REG1, &reg);
 	if (ret < 0)
 		return ret;
 
-	reg |= CTRL1_PD0;
+	reg |= CTRL1_PD0 | CTRL1_Xen | CTRL1_Yen | CTRL1_Zen;
 	return lis3->write(lis3, CTRL_REG1, reg);
 }
 
 /* Default axis mapping but it can be overwritten by platform data */
-static struct axis_conversion lis3lv02d_axis_map = { LIS3_DEV_X,
-						     LIS3_DEV_Y,
-						     LIS3_DEV_Z };
+static union axis_conversion lis3lv02d_axis_map =
+	{ .as_array = { LIS3_DEV_X, LIS3_DEV_Y, LIS3_DEV_Z } };
 
 static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
 					const struct i2c_device_id *id)
@@ -72,6 +106,15 @@ static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
 	struct lis3lv02d_platform_data *pdata = client->dev.platform_data;
 
 	if (pdata) {
+		/* Regulator control is optional */
+		if (pdata->driver_features & LIS3_USE_REGULATOR_CTRL)
+			lis3_dev.reg_ctrl = lis3_reg_ctrl;
+
+		if ((pdata->driver_features & LIS3_USE_BLOCK_READ) &&
+			(i2c_check_functionality(client->adapter,
+						I2C_FUNC_SMBUS_I2C_BLOCK)))
+			lis3_dev.blkread  = lis3_i2c_blockread;
+
 		if (pdata->axis_x)
 			lis3lv02d_axis_map.x = pdata->axis_x;
 
@@ -88,6 +131,16 @@ static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
 			goto fail;
 	}
 
+	if (lis3_dev.reg_ctrl) {
+		lis3_dev.regulators[0].supply = reg_vdd;
+		lis3_dev.regulators[1].supply = reg_vdd_io;
+		ret = regulator_bulk_get(&client->dev,
+					ARRAY_SIZE(lis3_dev.regulators),
+					lis3_dev.regulators);
+		if (ret < 0)
+			goto fail;
+	}
+
 	lis3_dev.pdata	  = pdata;
 	lis3_dev.bus_priv = client;
 	lis3_dev.init	  = lis3_i2c_init;
@@ -95,10 +148,24 @@ static int __devinit lis3lv02d_i2c_probe(struct i2c_client *client,
 	lis3_dev.write	  = lis3_i2c_write;
 	lis3_dev.irq	  = client->irq;
 	lis3_dev.ac	  = lis3lv02d_axis_map;
+	lis3_dev.pm_dev	  = &client->dev;
 
 	i2c_set_clientdata(client, &lis3_dev);
+
+	/* Provide power over the init call */
+	if (lis3_dev.reg_ctrl)
+		lis3_reg_ctrl(&lis3_dev, LIS3_REG_ON);
+
 	ret = lis3lv02d_init_device(&lis3_dev);
+
+	if (lis3_dev.reg_ctrl)
+		lis3_reg_ctrl(&lis3_dev, LIS3_REG_OFF);
+
+	if (ret == 0)
+		return 0;
 fail:
+	if (pdata && pdata->release_resources)
+		pdata->release_resources();
 	return ret;
 }
 
@@ -111,14 +178,18 @@ static int __devexit lis3lv02d_i2c_remove(struct i2c_client *client)
 		pdata->release_resources();
 
 	lis3lv02d_joystick_disable();
-	lis3lv02d_poweroff(lis3);
+	lis3lv02d_remove_fs(&lis3_dev);
 
-	return lis3lv02d_remove_fs(&lis3_dev);
+	if (lis3_dev.reg_ctrl)
+		regulator_bulk_free(ARRAY_SIZE(lis3->regulators),
+				lis3_dev.regulators);
+	return 0;
 }
 
 #ifdef CONFIG_PM
-static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
+static int lis3lv02d_i2c_suspend(struct device *dev)
 {
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
 
 	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
@@ -126,18 +197,21 @@ static int lis3lv02d_i2c_suspend(struct i2c_client *client, pm_message_t mesg)
 	return 0;
 }
 
-static int lis3lv02d_i2c_resume(struct i2c_client *client)
+static int lis3lv02d_i2c_resume(struct device *dev)
 {
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
 	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
 
-	if (!lis3->pdata || !lis3->pdata->wakeup_flags)
+	/*
+	 * pm_runtime documentation says that devices should always
+	 * be powered on at resume. Pm_runtime turns them off after system
+	 * wide resume is complete.
+	 */
+	if (!lis3->pdata || !lis3->pdata->wakeup_flags ||
+		pm_runtime_suspended(dev))
 		lis3lv02d_poweron(lis3);
-	return 0;
-}
 
-static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
-{
-	lis3lv02d_i2c_suspend(client, PMSG_SUSPEND);
+	return 0;
 }
 #else
 #define lis3lv02d_i2c_suspend	NULL
@@ -145,6 +219,24 @@ static void lis3lv02d_i2c_shutdown(struct i2c_client *client)
 #define lis3lv02d_i2c_shutdown	NULL
 #endif
 
+static int lis3_i2c_runtime_suspend(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+	lis3lv02d_poweroff(lis3);
+	return 0;
+}
+
+static int lis3_i2c_runtime_resume(struct device *dev)
+{
+	struct i2c_client *client = container_of(dev, struct i2c_client, dev);
+	struct lis3lv02d *lis3 = i2c_get_clientdata(client);
+
+	lis3lv02d_poweron(lis3);
+	return 0;
+}
+
 static const struct i2c_device_id lis3lv02d_id[] = {
 	{"lis3lv02d", 0 },
 	{}
@@ -152,14 +244,20 @@ static const struct i2c_device_id lis3lv02d_id[] = {
 
 MODULE_DEVICE_TABLE(i2c, lis3lv02d_id);
 
+static const struct dev_pm_ops lis3_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(lis3lv02d_i2c_suspend,
+				lis3lv02d_i2c_resume)
+	SET_RUNTIME_PM_OPS(lis3_i2c_runtime_suspend,
+			   lis3_i2c_runtime_resume,
+			   NULL)
+};
+
 static struct i2c_driver lis3lv02d_i2c_driver = {
 	.driver	 = {
 		.name   = DRV_NAME,
 		.owner  = THIS_MODULE,
+		.pm     = &lis3_pm_ops,
 	},
-	.suspend = lis3lv02d_i2c_suspend,
-	.shutdown = lis3lv02d_i2c_shutdown,
-	.resume = lis3lv02d_i2c_resume,
 	.probe	= lis3lv02d_i2c_probe,
 	.remove	= __devexit_p(lis3lv02d_i2c_remove),
 	.id_table = lis3lv02d_id,