diff options
Diffstat (limited to 'drivers/i2c/busses/Kconfig')
| -rw-r--r-- | drivers/i2c/busses/Kconfig | 499 |
1 files changed, 499 insertions, 0 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig new file mode 100644 index 000000000000..edf8051da3b4 --- /dev/null +++ b/drivers/i2c/busses/Kconfig @@ -0,0 +1,499 @@ +# +# Sensor device configuration +# + +menu "I2C Hardware Bus support" + depends on I2C + +config I2C_ALI1535 + tristate "ALI 1535" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the SMB + Host controller on Acer Labs Inc. (ALI) M1535 South Bridges. The SMB + controller is part of the 7101 device, which is an ACPI-compliant + Power Management Unit (PMU). + + This driver can also be built as a module. If so, the module + will be called i2c-ali1535. + +config I2C_ALI1563 + tristate "ALI 1563" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the SMB + Host controller on Acer Labs Inc. (ALI) M1563 South Bridges. The SMB + controller is part of the 7101 device, which is an ACPI-compliant + Power Management Unit (PMU). + + This driver can also be built as a module. If so, the module + will be called i2c-ali1563. + +config I2C_ALI15X3 + tristate "ALI 15x3" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + Acer Labs Inc. (ALI) M1514 and M1543 motherboard I2C interfaces. + + This driver can also be built as a module. If so, the module + will be called i2c-ali15x3. + +config I2C_AMD756 + tristate "AMD 756/766/768/8111 and nVidia nForce" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the AMD + 756/766/768 mainboard I2C interfaces. The driver also includes + support for the first (SMBus 1.0) I2C interface of the AMD 8111 and + the nVidia nForce I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-amd756. + +config I2C_AMD756_S4882 + tristate "SMBus multiplexing on the Tyan S4882" + depends on I2C_AMD756 && EXPERIMENTAL + help + Enabling this option will add specific SMBus support for the Tyan + S4882 motherboard. On this 4-CPU board, the SMBus is multiplexed + over 8 different channels, where the various memory module EEPROMs + and temperature sensors live. Saying yes here will give you access + to these in addition to the trunk. + + This driver can also be built as a module. If so, the module + will be called i2c-amd756-s4882. + +config I2C_AMD8111 + tristate "AMD 8111" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + second (SMBus 2.0) AMD 8111 mainboard I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-amd8111. + +config I2C_AU1550 + tristate "Au1550 SMBus interface" + depends on I2C && SOC_AU1550 + help + If you say yes to this option, support will be included for the + Au1550 SMBus interface. + + This driver can also be built as a module. If so, the module + will be called i2c-au1550. + +config I2C_ELEKTOR + tristate "Elektor ISA card" + depends on I2C && ISA && BROKEN_ON_SMP + select I2C_ALGOPCF + help + This supports the PCF8584 ISA bus I2C adapter. Say Y if you own + such an adapter. + + This support is also available as a module. If so, the module + will be called i2c-elektor. + +config I2C_HYDRA + tristate "CHRP Apple Hydra Mac I/O I2C interface" + depends on I2C && PCI && PPC_CHRP && EXPERIMENTAL + select I2C_ALGOBIT + help + This supports the use of the I2C interface in the Apple Hydra Mac + I/O chip on some CHRP machines (e.g. the LongTrail). Say Y if you + have such a machine. + + This support is also available as a module. If so, the module + will be called i2c-hydra. + +config I2C_I801 + tristate "Intel 82801 (ICH)" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the Intel + 801 family of mainboard I2C interfaces. Specifically, the following + versions of the chipset are supported: + 82801AA + 82801AB + 82801BA + 82801CA/CAM + 82801DB + 82801EB/ER (ICH5/ICH5R) + 6300ESB + ICH6 + ICH7 + + This driver can also be built as a module. If so, the module + will be called i2c-i801. + +config I2C_I810 + tristate "Intel 810/815" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the Intel + 810/815 family of mainboard I2C interfaces. Specifically, the + following versions of the chipset is supported: + i810AA + i810AB + i810E + i815 + + This driver can also be built as a module. If so, the module + will be called i2c-i810. + +config I2C_PIIX4 + tristate "Intel PIIX4" + depends on I2C && PCI + help + If you say yes to this option, support will be included for the Intel + PIIX4 family of mainboard I2C interfaces. Specifically, the following + versions of the chipset are supported: + Intel PIIX4 + Intel 440MX + Serverworks OSB4 + Serverworks CSB5 + Serverworks CSB6 + SMSC Victory66 + + This driver can also be built as a module. If so, the module + will be called i2c-piix4. + +config I2C_IBM_IIC + tristate "IBM PPC 4xx on-chip I2C interface" + depends on IBM_OCP && I2C + help + Say Y here if you want to use IIC peripheral found on + embedded IBM PPC 4xx based systems. + + This driver can also be built as a module. If so, the module + will be called i2c-ibm_iic. + +config I2C_IOP3XX + tristate "Intel IOP3xx and IXP4xx on-chip I2C interface" + depends on (ARCH_IOP3XX || ARCH_IXP4XX) && I2C + help + Say Y here if you want to use the IIC bus controller on + the Intel IOP3xx I/O Processors or IXP4xx Network Processors. + + This driver can also be built as a module. If so, the module + will be called i2c-iop3xx. + +config I2C_ISA + tristate "ISA Bus support" + depends on I2C && EXPERIMENTAL + help + If you say yes to this option, support will be included for i2c + interfaces that are on the ISA bus. + + This driver can also be built as a module. If so, the module + will be called i2c-isa. + +config I2C_ITE + tristate "ITE I2C Adapter" + depends on I2C && MIPS_ITE8172 + select I2C_ALGOITE + help + This supports the ITE8172 I2C peripheral found on some MIPS + systems. Say Y if you have one of these. You should also say Y for + the ITE I2C driver algorithm support above. + + This support is also available as a module. If so, the module + will be called i2c-ite. + +config I2C_IXP4XX + tristate "IXP4xx GPIO-Based I2C Interface" + depends on I2C && ARCH_IXP4XX + select I2C_ALGOBIT + help + Say Y here if you have an Intel IXP4xx(420,421,422,425) based + system and are using GPIO lines for an I2C bus. + + This support is also available as a module. If so, the module + will be called i2c-ixp4xx. + +config I2C_IXP2000 + tristate "IXP2000 GPIO-Based I2C Interface" + depends on I2C && ARCH_IXP2000 + select I2C_ALGOBIT + help + Say Y here if you have an Intel IXP2000(2400, 2800, 2850) based + system and are using GPIO lines for an I2C bus. + + This support is also available as a module. If so, the module + will be called i2c-ixp2000. + +config I2C_KEYWEST + tristate "Powermac Keywest I2C interface" + depends on I2C && PPC_PMAC + help + This supports the use of the I2C interface in the combo-I/O + chip on recent Apple machines. Say Y if you have such a machine. + + This support is also available as a module. If so, the module + will be called i2c-keywest. + +config I2C_MPC + tristate "MPC107/824x/85xx/52xx" + depends on I2C && PPC + help + If you say yes to this option, support will be included for the + built-in I2C interface on the MPC107/Tsi107/MPC8240/MPC8245 and + MPC85xx family processors. The driver may also work on 52xx + family processors, though interrupts are known not to work. + + This driver can also be built as a module. If so, the module + will be called i2c-mpc. + +config I2C_NFORCE2 + tristate "Nvidia Nforce2" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the Nvidia + Nforce2 family of mainboard I2C interfaces. + This driver also supports the nForce3 Pro 150 MCP. + + This driver can also be built as a module. If so, the module + will be called i2c-nforce2. + +config I2C_PARPORT + tristate "Parallel port adapter" + depends on I2C && PARPORT + select I2C_ALGOBIT + help + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. + + This driver is a replacement for (and was inspired by) an older + driver named i2c-philips-par. The new driver supports more devices, + and makes it easier to add support for new devices. + + Another driver exists, named i2c-parport-light, which doesn't depend + on the parport driver. This is meant for embedded systems. Don't say + Y here if you intend to say Y or M there. + + This support is also available as a module. If so, the module + will be called i2c-parport. + +config I2C_PARPORT_LIGHT + tristate "Parallel port adapter (light)" + depends on I2C + select I2C_ALGOBIT + help + This supports parallel port I2C adapters such as the ones made by + Philips or Velleman, Analog Devices evaluation boards, and more. + Basically any adapter using the parallel port as an I2C bus with + no extra chipset is supported by this driver, or could be. + + This driver is a light version of i2c-parport. It doesn't depend + on the parport driver, and uses direct I/O access instead. This + might be prefered on embedded systems where wasting memory for + the clean but heavy parport handling is not an option. The + drawback is a reduced portability and the impossibility to + dasiy-chain other parallel port devices. + + Don't say Y here if you said Y or M to i2c-parport. Saying M to + both is possible but both modules should not be loaded at the same + time. + + This support is also available as a module. If so, the module + will be called i2c-parport-light. + +config I2C_PROSAVAGE + tristate "S3/VIA (Pro)Savage" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the + I2C bus and DDC bus of the S3VIA embedded Savage4 and ProSavage8 + graphics processors. + chipsets supported: + S3/VIA KM266/VT8375 aka ProSavage8 + S3/VIA KM133/VT8365 aka Savage4 + + This support is also available as a module. If so, the module + will be called i2c-prosavage. + +config I2C_RPXLITE + tristate "Embedded Planet RPX Lite/Classic support" + depends on (RPXLITE || RPXCLASSIC) && I2C + select I2C_ALGO8XX + +config I2C_S3C2410 + tristate "S3C2410 I2C Driver" + depends on I2C && ARCH_S3C2410 + help + Say Y here to include support for I2C controller in the + Samsung S3C2410 based System-on-Chip devices. + +config I2C_SAVAGE4 + tristate "S3 Savage 4" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the + S3 Savage 4 I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-savage4. + +config I2C_SIBYTE + tristate "SiByte SMBus interface" + depends on SIBYTE_SB1xxx_SOC && I2C + help + Supports the SiByte SOC on-chip I2C interfaces (2 channels). + +config SCx200_I2C + tristate "NatSemi SCx200 I2C using GPIO pins" + depends on SCx200_GPIO && I2C + select I2C_ALGOBIT + help + Enable the use of two GPIO pins of a SCx200 processor as an I2C bus. + + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_i2c. + +config SCx200_I2C_SCL + int "GPIO pin used for SCL" + depends on SCx200_I2C + default "12" + help + Enter the GPIO pin number used for the SCL signal. This value can + also be specified with a module parameter. + +config SCx200_I2C_SDA + int "GPIO pin used for SDA" + depends on SCx200_I2C + default "13" + help + Enter the GPIO pin number used for the SSA signal. This value can + also be specified with a module parameter. + +config SCx200_ACB + tristate "NatSemi SCx200 ACCESS.bus" + depends on I2C && PCI + help + Enable the use of the ACCESS.bus controllers of a SCx200 processor. + + If you don't know what to do here, say N. + + This support is also available as a module. If so, the module + will be called scx200_acb. + +config I2C_SIS5595 + tristate "SiS 5595" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + SiS5595 SMBus (a subset of I2C) interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sis5595. + +config I2C_SIS630 + tristate "SiS 630/730" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + SiS630 and SiS730 SMBus (a subset of I2C) interface. + + This driver can also be built as a module. If so, the module + will be called i2c-sis630. + +config I2C_SIS96X + tristate "SiS 96x" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the SiS + 96x SMBus (a subset of I2C) interfaces. Specifically, the following + chipsets are supported: + 645/961 + 645DX/961 + 645DX/962 + 648/961 + 650/961 + 735 + + This driver can also be built as a module. If so, the module + will be called i2c-sis96x. + +config I2C_STUB + tristate "I2C/SMBus Test Stub" + depends on I2C && EXPERIMENTAL && 'm' + default 'n' + help + This module may be useful to developers of SMBus client drivers, + especially for certain kinds of sensor chips. + + If you do build this module, be sure to read the notes and warnings + in <file:Documentation/i2c/i2c-stub>. + + If you don't know what to do here, definitely say N. + +config I2C_VIA + tristate "VIA 82C586B" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the VIA + 82C586B I2C interface + + This driver can also be built as a module. If so, the module + will be called i2c-via. + +config I2C_VIAPRO + tristate "VIA 82C596/82C686/823x" + depends on I2C && PCI && EXPERIMENTAL + help + If you say yes to this option, support will be included for the VIA + 82C596/82C686/823x I2C interfaces. Specifically, the following + chipsets are supported: + 82C596A/B + 82C686A/B + 8231 + 8233 + 8233A + 8235 + 8237 + + This driver can also be built as a module. If so, the module + will be called i2c-viapro. + +config I2C_VOODOO3 + tristate "Voodoo 3" + depends on I2C && PCI && EXPERIMENTAL + select I2C_ALGOBIT + help + If you say yes to this option, support will be included for the + Voodoo 3 I2C interface. + + This driver can also be built as a module. If so, the module + will be called i2c-voodoo3. + +config I2C_PCA_ISA + tristate "PCA9564 on an ISA bus" + depends on I2C + select I2C_ALGOPCA + help + This driver supports ISA boards using the Philips PCA 9564 + Parallel bus to I2C bus controller + + This driver can also be built as a module. If so, the module + will be called i2c-pca-isa. + +config I2C_MV64XXX + tristate "Marvell mv64xxx I2C Controller" + depends on I2C && MV64X60 && EXPERIMENTAL + help + If you say yes to this option, support will be included for the + built-in I2C interface on the Marvell 64xxx line of host bridges. + + This driver can also be built as a module. If so, the module + will be called i2c-mv64xxx. + +endmenu |