diff options
Diffstat (limited to 'drivers/i2c/busses/i2c-designware-core.c')
| -rw-r--r-- | drivers/i2c/busses/i2c-designware-core.c | 45 |
1 files changed, 11 insertions, 34 deletions
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 6d81c56184d3..e9db857c6226 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -475,30 +475,28 @@ static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev) static void i2c_dw_xfer_init(struct dw_i2c_dev *dev) { struct i2c_msg *msgs = dev->msgs; - u32 ic_tar = 0; + u32 ic_con, ic_tar = 0; /* Disable the adapter */ __i2c_dw_enable_and_wait(dev, false); /* if the slave address is ten bit address, enable 10BITADDR */ - if (dev->dynamic_tar_update_enabled) { + ic_con = dw_readl(dev, DW_IC_CON); + if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) { + ic_con |= DW_IC_CON_10BITADDR_MASTER; /* * If I2C_DYNAMIC_TAR_UPDATE is set, the 10-bit addressing - * mode has to be enabled via bit 12 of IC_TAR register, - * otherwise bit 4 of IC_CON is used. + * mode has to be enabled via bit 12 of IC_TAR register. + * We set it always as I2C_DYNAMIC_TAR_UPDATE can't be + * detected from registers. */ - if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) - ic_tar = DW_IC_TAR_10BITADDR_MASTER; + ic_tar = DW_IC_TAR_10BITADDR_MASTER; } else { - u32 ic_con = dw_readl(dev, DW_IC_CON); - - if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) - ic_con |= DW_IC_CON_10BITADDR_MASTER; - else - ic_con &= ~DW_IC_CON_10BITADDR_MASTER; - dw_writel(dev, ic_con, DW_IC_CON); + ic_con &= ~DW_IC_CON_10BITADDR_MASTER; } + dw_writel(dev, ic_con, DW_IC_CON); + /* * Set the slave (target) address and enable 10-bit addressing mode * if applicable. @@ -963,7 +961,6 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) { struct i2c_adapter *adap = &dev->adapter; int r; - u32 reg; init_completion(&dev->cmd_complete); @@ -971,26 +968,6 @@ int i2c_dw_probe(struct dw_i2c_dev *dev) if (r) return r; - r = i2c_dw_acquire_lock(dev); - if (r) - return r; - - /* - * Test if dynamic TAR update is enabled in this controller by writing - * to IC_10BITADDR_MASTER field in IC_CON: when it is enabled this - * field is read-only so it should not succeed - */ - reg = dw_readl(dev, DW_IC_CON); - dw_writel(dev, reg ^ DW_IC_CON_10BITADDR_MASTER, DW_IC_CON); - - if ((dw_readl(dev, DW_IC_CON) & DW_IC_CON_10BITADDR_MASTER) == - (reg & DW_IC_CON_10BITADDR_MASTER)) { - dev->dynamic_tar_update_enabled = true; - dev_dbg(dev->dev, "Dynamic TAR update enabled"); - } - - i2c_dw_release_lock(dev); - snprintf(adap->name, sizeof(adap->name), "Synopsys DesignWare I2C adapter"); adap->retries = 3; |