aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c/busses
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c/busses')
-rw-r--r--drivers/i2c/busses/Kconfig36
-rw-r--r--drivers/i2c/busses/Makefile4
-rw-r--r--drivers/i2c/busses/i2c-acorn.c2
-rw-r--r--drivers/i2c/busses/i2c-gpio.c12
-rw-r--r--drivers/i2c/busses/i2c-i801.c249
-rw-r--r--drivers/i2c/busses/i2c-iop3xx.c3
-rw-r--r--drivers/i2c/busses/i2c-isa.c192
-rw-r--r--drivers/i2c/busses/i2c-mpc.c26
-rw-r--r--drivers/i2c/busses/i2c-mv64xxx.c3
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c44
-rw-r--r--drivers/i2c/busses/i2c-piix4.c4
-rw-r--r--drivers/i2c/busses/i2c-pmcmsp.c653
-rw-r--r--drivers/i2c/busses/i2c-powermac.c3
-rw-r--r--drivers/i2c/busses/i2c-pxa.c9
-rw-r--r--drivers/i2c/busses/i2c-rpx.c101
-rw-r--r--drivers/i2c/busses/i2c-savage4.c21
-rw-r--r--drivers/i2c/busses/i2c-sis5595.c27
-rw-r--r--drivers/i2c/busses/i2c-taos-evm.c330
-rw-r--r--drivers/i2c/busses/i2c-viapro.c5
-rw-r--r--drivers/i2c/busses/scx200_acb.c16
20 files changed, 1302 insertions, 438 deletions
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 838dc1c19d61..da1647869f91 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -207,6 +207,7 @@ config I2C_PIIX4
ATI IXP300
ATI IXP400
ATI SB600
+ ATI SB700
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
@@ -236,9 +237,6 @@ config I2C_IOP3XX
This driver can also be built as a module. If so, the module
will be called i2c-iop3xx.
-config I2C_ISA
- tristate
-
config I2C_IXP4XX
tristate "IXP4xx GPIO-Based I2C Interface (DEPRECATED)"
depends on ARCH_IXP4XX
@@ -390,11 +388,6 @@ config I2C_PROSAVAGE
This support is also available as a module. If so, the module
will be called i2c-prosavage.
-config I2C_RPXLITE
- tristate "Embedded Planet RPX Lite/Classic support"
- depends on RPXLITE || RPXCLASSIC
- select I2C_ALGO8XX
-
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
depends on ARCH_S3C2410
@@ -512,6 +505,22 @@ config I2C_SIS96X
This driver can also be built as a module. If so, the module
will be called i2c-sis96x.
+config I2C_TAOS_EVM
+ tristate "TAOS evaluation module"
+ depends on EXPERIMENTAL
+ select SERIO
+ select SERIO_SERPORT
+ default n
+ help
+ This supports TAOS evaluation modules on serial port. In order to
+ use this driver, you will need the inputattach tool, which is part
+ of the input-utils package.
+
+ If unsure, say N.
+
+ This support is also available as a module. If so, the module
+ will be called i2c-taos-evm.
+
config I2C_STUB
tristate "I2C/SMBus Test Stub"
depends on EXPERIMENTAL && m
@@ -548,7 +557,7 @@ config I2C_VERSATILE
will be called i2c-versatile.
config I2C_ACORN
- bool "Acorn IOC/IOMD I2C bus support"
+ tristate "Acorn IOC/IOMD I2C bus support"
depends on ARCH_ACORN
default y
select I2C_ALGOBIT
@@ -635,4 +644,13 @@ config I2C_PNX
This driver can also be built as a module. If so, the module
will be called i2c-pnx.
+config I2C_PMCMSP
+ tristate "PMC MSP I2C TWI Controller"
+ depends on PMC_MSP
+ help
+ This driver supports the PMC TWI controller on MSP devices.
+
+ This driver can also be built as module. If so, the module
+ will be called i2c-pmcmsp.
+
endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 14d1432f698b..5b752e4e1918 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -18,7 +18,6 @@ obj-$(CONFIG_I2C_I801) += i2c-i801.o
obj-$(CONFIG_I2C_I810) += i2c-i810.o
obj-$(CONFIG_I2C_IBM_IIC) += i2c-ibm_iic.o
obj-$(CONFIG_I2C_IOP3XX) += i2c-iop3xx.o
-obj-$(CONFIG_I2C_ISA) += i2c-isa.o
obj-$(CONFIG_I2C_IXP2000) += i2c-ixp2000.o
obj-$(CONFIG_I2C_IXP4XX) += i2c-ixp4xx.o
obj-$(CONFIG_I2C_POWERMAC) += i2c-powermac.o
@@ -32,10 +31,10 @@ obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o
obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o
obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o
obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o
+obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o
obj-$(CONFIG_I2C_PNX) += i2c-pnx.o
obj-$(CONFIG_I2C_PROSAVAGE) += i2c-prosavage.o
obj-$(CONFIG_I2C_PXA) += i2c-pxa.o
-obj-$(CONFIG_I2C_RPXLITE) += i2c-rpx.o
obj-$(CONFIG_I2C_S3C2410) += i2c-s3c2410.o
obj-$(CONFIG_I2C_SAVAGE4) += i2c-savage4.o
obj-$(CONFIG_I2C_SIBYTE) += i2c-sibyte.o
@@ -44,6 +43,7 @@ obj-$(CONFIG_I2C_SIS5595) += i2c-sis5595.o
obj-$(CONFIG_I2C_SIS630) += i2c-sis630.o
obj-$(CONFIG_I2C_SIS96X) += i2c-sis96x.o
obj-$(CONFIG_I2C_STUB) += i2c-stub.o
+obj-$(CONFIG_I2C_TAOS_EVM) += i2c-taos-evm.o
obj-$(CONFIG_I2C_TINY_USB) += i2c-tiny-usb.o
obj-$(CONFIG_I2C_VERSATILE) += i2c-versatile.o
obj-$(CONFIG_I2C_ACORN) += i2c-acorn.o
diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c
index 09bd7f40b90c..7c2be3558a24 100644
--- a/drivers/i2c/busses/i2c-acorn.c
+++ b/drivers/i2c/busses/i2c-acorn.c
@@ -94,4 +94,4 @@ static int __init i2c_ioc_init(void)
return i2c_bit_add_bus(&ioc_ops);
}
-__initcall(i2c_ioc_init);
+module_init(i2c_ioc_init);
diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c
index a7dd54654a9a..025f19423faf 100644
--- a/drivers/i2c/busses/i2c-gpio.c
+++ b/drivers/i2c/busses/i2c-gpio.c
@@ -63,14 +63,14 @@ static void i2c_gpio_setscl_val(void *data, int state)
gpio_set_value(pdata->scl_pin, state);
}
-int i2c_gpio_getsda(void *data)
+static int i2c_gpio_getsda(void *data)
{
struct i2c_gpio_platform_data *pdata = data;
return gpio_get_value(pdata->sda_pin);
}
-int i2c_gpio_getscl(void *data)
+static int i2c_gpio_getscl(void *data)
{
struct i2c_gpio_platform_data *pdata = data;
@@ -142,7 +142,13 @@ static int __init i2c_gpio_probe(struct platform_device *pdev)
adap->algo_data = bit_data;
adap->dev.parent = &pdev->dev;
- ret = i2c_bit_add_bus(adap);
+ /*
+ * If "dev->id" is negative we consider it as zero.
+ * The reason to do so is to avoid sysfs names that only make
+ * sense when there are multiple adapters.
+ */
+ adap->nr = pdev->id >= 0 ? pdev->id : 0;
+ ret = i2c_bit_add_numbered_bus(adap);
if (ret)
goto err_add_bus;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 611b57192c96..8f5c686123b8 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -22,12 +22,12 @@
/*
SUPPORTED DEVICES PCI ID
- 82801AA 2413
- 82801AB 2423
- 82801BA 2443
- 82801CA/CAM 2483
- 82801DB 24C3 (HW PEC supported, 32 byte buffer not supported)
- 82801EB 24D3 (HW PEC supported, 32 byte buffer not supported)
+ 82801AA 2413
+ 82801AB 2423
+ 82801BA 2443
+ 82801CA/CAM 2483
+ 82801DB 24C3 (HW PEC supported)
+ 82801EB 24D3 (HW PEC supported)
6300ESB 25A4
ICH6 266A
ICH7 27DA
@@ -74,6 +74,13 @@
#define SMBHSTCFG_SMB_SMI_EN 2
#define SMBHSTCFG_I2C_EN 4
+/* Auxillary control register bits, ICH4+ only */
+#define SMBAUXCTL_CRC 1
+#define SMBAUXCTL_E32B 2
+
+/* kill bit for SMBHSTCNT */
+#define SMBHSTCNT_KILL 2
+
/* Other settings */
#define MAX_TIMEOUT 100
#define ENABLE_INT9 0 /* set to 0x01 to enable - untested */
@@ -91,10 +98,15 @@
#define I801_START 0x40
#define I801_PEC_EN 0x80 /* ICH4 only */
-
-static int i801_transaction(void);
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command, int hwpec);
+/* I801 Hosts Status register bits */
+#define SMBHSTSTS_BYTE_DONE 0x80
+#define SMBHSTSTS_INUSE_STS 0x40
+#define SMBHSTSTS_SMBALERT_STS 0x20
+#define SMBHSTSTS_FAILED 0x10
+#define SMBHSTSTS_BUS_ERR 0x08
+#define SMBHSTSTS_DEV_ERR 0x04
+#define SMBHSTSTS_INTR 0x02
+#define SMBHSTSTS_HOST_BUSY 0x01
static unsigned long i801_smba;
static unsigned char i801_original_hstcfg;
@@ -102,7 +114,7 @@ static struct pci_driver i801_driver;
static struct pci_dev *I801_dev;
static int isich4;
-static int i801_transaction(void)
+static int i801_transaction(int xact)
{
int temp;
int result = 0;
@@ -127,33 +139,40 @@ static int i801_transaction(void)
}
}
- outb_p(inb(SMBHSTCNT) | I801_START, SMBHSTCNT);
+ /* the current contents of SMBHSTCNT can be overwritten, since PEC,
+ * INTREN, SMBSCMD are passed in xact */
+ outb_p(xact | I801_START, SMBHSTCNT);
/* We will always wait for a fraction of a second! */
do {
msleep(1);
temp = inb_p(SMBHSTSTS);
- } while ((temp & 0x01) && (timeout++ < MAX_TIMEOUT));
+ } while ((temp & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
result = -1;
+ /* try to stop the current command */
+ dev_dbg(&I801_dev->dev, "Terminating the current operation\n");
+ outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
+ msleep(1);
+ outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL), SMBHSTCNT);
}
- if (temp & 0x10) {
+ if (temp & SMBHSTSTS_FAILED) {
result = -1;
dev_dbg(&I801_dev->dev, "Error: Failed bus transaction\n");
}
- if (temp & 0x08) {
+ if (temp & SMBHSTSTS_BUS_ERR) {
result = -1;
dev_err(&I801_dev->dev, "Bus collision! SMBus may be locked "
"until next hard reset. (sorry!)\n");
/* Clock stops and slave is stuck in mid-transmission */
}
- if (temp & 0x04) {
+ if (temp & SMBHSTSTS_DEV_ERR) {
result = -1;
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
@@ -172,44 +191,70 @@ static int i801_transaction(void)
return result;
}
-/* All-inclusive block transaction function */
-static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
- int command, int hwpec)
+/* wait for INTR bit as advised by Intel */
+static void i801_wait_hwpec(void)
+{
+ int timeout = 0;
+ int temp;
+
+ do {
+ msleep(1);
+ temp = inb_p(SMBHSTSTS);
+ } while ((!(temp & SMBHSTSTS_INTR))
+ && (timeout++ < MAX_TIMEOUT));
+
+ if (timeout >= MAX_TIMEOUT) {
+ dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+ }
+ outb_p(temp, SMBHSTSTS);
+}
+
+static int i801_block_transaction_by_block(union i2c_smbus_data *data,
+ char read_write, int hwpec)
+{
+ int i, len;
+
+ inb_p(SMBHSTCNT); /* reset the data buffer index */
+
+ /* Use 32-byte buffer to process this transaction */
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ outb_p(len, SMBHSTDAT0);
+ for (i = 0; i < len; i++)
+ outb_p(data->block[i+1], SMBBLKDAT);
+ }
+
+ if (i801_transaction(I801_BLOCK_DATA | ENABLE_INT9 |
+ I801_PEC_EN * hwpec))
+ return -1;
+
+ if (read_write == I2C_SMBUS_READ) {
+ len = inb_p(SMBHSTDAT0);
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -1;
+
+ data->block[0] = len;
+ for (i = 0; i < len; i++)
+ data->block[i + 1] = inb_p(SMBBLKDAT);
+ }
+ return 0;
+}
+
+static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
+ char read_write, int hwpec)
{
int i, len;
int smbcmd;
int temp;
int result = 0;
int timeout;
- unsigned char hostc, errmask;
+ unsigned char errmask;
- if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
- if (read_write == I2C_SMBUS_WRITE) {
- /* set I2C_EN bit in configuration register */
- pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
- pci_write_config_byte(I801_dev, SMBHSTCFG,
- hostc | SMBHSTCFG_I2C_EN);
- } else {
- dev_err(&I801_dev->dev,
- "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
- return -1;
- }
- }
+ len = data->block[0];
if (read_write == I2C_SMBUS_WRITE) {
- len = data->block[0];
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
outb_p(len, SMBHSTDAT0);
outb_p(data->block[1], SMBBLKDAT);
- } else {
- len = 32; /* max for reads */
- }
-
- if(isich4 && command != I2C_SMBUS_I2C_BLOCK_DATA) {
- /* set 32 byte buffer */
}
for (i = 1; i <= len; i++) {
@@ -227,13 +272,13 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
/* Make sure the SMBus host is ready to start transmitting */
temp = inb_p(SMBHSTSTS);
if (i == 1) {
- /* Erronenous conditions before transaction:
+ /* Erronenous conditions before transaction:
* Byte_Done, Failed, Bus_Err, Dev_Err, Intr, Host_Busy */
- errmask=0x9f;
+ errmask = 0x9f;
} else {
- /* Erronenous conditions during transaction:
+ /* Erronenous conditions during transaction:
* Failed, Bus_Err, Dev_Err, Intr */
- errmask=0x1e;
+ errmask = 0x1e;
}
if (temp & errmask) {
dev_dbg(&I801_dev->dev, "SMBus busy (%02x). "
@@ -242,14 +287,11 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
if (((temp = inb_p(SMBHSTSTS)) & errmask) != 0x00) {
dev_err(&I801_dev->dev,
"Reset failed! (%02x)\n", temp);
- result = -1;
- goto END;
+ return -1;
}
- if (i != 1) {
+ if (i != 1)
/* if die in middle of block transaction, fail */
- result = -1;
- goto END;
- }
+ return -1;
}
if (i == 1)
@@ -261,33 +303,38 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
msleep(1);
temp = inb_p(SMBHSTSTS);
}
- while ((!(temp & 0x80))
- && (timeout++ < MAX_TIMEOUT));
+ while ((!(temp & SMBHSTSTS_BYTE_DONE))
+ && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
if (timeout >= MAX_TIMEOUT) {
+ /* try to stop the current command */
+ dev_dbg(&I801_dev->dev, "Terminating the current "
+ "operation\n");
+ outb_p(inb_p(SMBHSTCNT) | SMBHSTCNT_KILL, SMBHSTCNT);
+ msleep(1);
+ outb_p(inb_p(SMBHSTCNT) & (~SMBHSTCNT_KILL),
+ SMBHSTCNT);
result = -1;
dev_dbg(&I801_dev->dev, "SMBus Timeout!\n");
}
- if (temp & 0x10) {
+ if (temp & SMBHSTSTS_FAILED) {
result = -1;
dev_dbg(&I801_dev->dev,
"Error: Failed bus transaction\n");
- } else if (temp & 0x08) {
+ } else if (temp & SMBHSTSTS_BUS_ERR) {
result = -1;
dev_err(&I801_dev->dev, "Bus collision!\n");
- } else if (temp & 0x04) {
+ } else if (temp & SMBHSTSTS_DEV_ERR) {
result = -1;
dev_dbg(&I801_dev->dev, "Error: no response!\n");
}
if (i == 1 && read_write == I2C_SMBUS_READ) {
len = inb_p(SMBHSTDAT0);
- if (len < 1)
- len = 1;
- if (len > 32)
- len = 32;
+ if (len < 1 || len > I2C_SMBUS_BLOCK_MAX)
+ return -1;
data->block[0] = len;
}
@@ -310,25 +357,58 @@ static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
inb_p(SMBHSTDAT0), inb_p(SMBBLKDAT));
if (result < 0)
- goto END;
+ return result;
}
+ return result;
+}
- if (hwpec) {
- /* wait for INTR bit as advised by Intel */
- timeout = 0;
- do {
- msleep(1);
- temp = inb_p(SMBHSTSTS);
- } while ((!(temp & 0x02))
- && (timeout++ < MAX_TIMEOUT));
+static int i801_set_block_buffer_mode(void)
+{
+ outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_E32B, SMBAUXCTL);
+ if ((inb_p(SMBAUXCTL) & SMBAUXCTL_E32B) == 0)
+ return -1;
+ return 0;
+}
- if (timeout >= MAX_TIMEOUT) {
- dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
+/* Block transaction function */
+static int i801_block_transaction(union i2c_smbus_data *data, char read_write,
+ int command, int hwpec)
+{
+ int result = 0;
+ unsigned char hostc;
+
+ if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
+ if (read_write == I2C_SMBUS_WRITE) {
+ /* set I2C_EN bit in configuration register */
+ pci_read_config_byte(I801_dev, SMBHSTCFG, &hostc);
+ pci_write_config_byte(I801_dev, SMBHSTCFG,
+ hostc | SMBHSTCFG_I2C_EN);
+ } else {
+ dev_err(&I801_dev->dev,
+ "I2C_SMBUS_I2C_BLOCK_READ not DB!\n");
+ return -1;
}
- outb_p(temp, SMBHSTSTS);
}
- result = 0;
-END:
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ if (data->block[0] < 1)
+ data->block[0] = 1;
+ if (data->block[0] > I2C_SMBUS_BLOCK_MAX)
+ data->block[0] = I2C_SMBUS_BLOCK_MAX;
+ } else {
+ data->block[0] = 32; /* max for reads */
+ }
+
+ if (isich4 && i801_set_block_buffer_mode() == 0 )
+ result = i801_block_transaction_by_block(data, read_write,
+ hwpec);
+ else
+ result = i801_block_transaction_byte_by_byte(data, read_write,
+ hwpec);
+
+ if (result == 0 && hwpec)
+ i801_wait_hwpec();
+
if (command == I2C_SMBUS_I2C_BLOCK_DATA) {
/* restore saved configuration register value */
pci_write_config_byte(I801_dev, SMBHSTCFG, hostc);
@@ -393,19 +473,22 @@ static s32 i801_access(struct i2c_adapter * adap, u16 addr,
return -1;
}
- outb_p(hwpec, SMBAUXCTL); /* enable/disable hardware PEC */
+ if (hwpec) /* enable/disable hardware PEC */
+ outb_p(inb_p(SMBAUXCTL) | SMBAUXCTL_CRC, SMBAUXCTL);
+ else
+ outb_p(inb_p(SMBAUXCTL) & (~SMBAUXCTL_CRC), SMBAUXCTL);
if(block)
ret = i801_block_transaction(data, read_write, size, hwpec);
- else {
- outb_p(xact | ENABLE_INT9, SMBHSTCNT);
- ret = i801_transaction();
- }
+ else
+ ret = i801_transaction(xact | ENABLE_INT9);
/* Some BIOSes don't like it when PEC is enabled at reboot or resume
- time, so we forcibly disable it after every transaction. */
+ time, so we forcibly disable it after every transaction. Turn off
+ E32B for the same reason. */
if (hwpec)
- outb_p(0, SMBAUXCTL);
+ outb_p(inb_p(SMBAUXCTL) & ~(SMBAUXCTL_CRC | SMBAUXCTL_E32B),
+ SMBAUXCTL);
if(block)
return ret;
diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c
index 90e2d9350c1b..440342bc62e1 100644
--- a/drivers/i2c/busses/i2c-iop3xx.c
+++ b/drivers/i2c/busses/i2c-iop3xx.c
@@ -491,6 +491,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
new_adapter->id = I2C_HW_IOP3XX;
new_adapter->owner = THIS_MODULE;
new_adapter->dev.parent = &pdev->dev;
+ new_adapter->nr = pdev->id;
/*
* Default values...should these come in from board code?
@@ -508,7 +509,7 @@ iop3xx_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, new_adapter);
new_adapter->algo_data = adapter_data;
- i2c_add_adapter(new_adapter);
+ i2c_add_numbered_adapter(new_adapter);
return 0;
diff --git a/drivers/i2c/busses/i2c-isa.c b/drivers/i2c/busses/i2c-isa.c
deleted file mode 100644
index b0e1370075de..000000000000
--- a/drivers/i2c/busses/i2c-isa.c
+++ /dev/null
@@ -1,192 +0,0 @@
-/*
- i2c-isa.c - an i2c-core-like thing for ISA hardware monitoring chips
- Copyright (C) 2005 Jean Delvare <khali@linux-fr.org>
-
- Based on the i2c-isa pseudo-adapter from the lm_sensors project
- Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl>
-
- This program is free software; you can redistribute it and/or modify
- it under the terms of the GNU General Public License as published by
- the Free Software Foundation; either version 2 of the License, or
- (at your option) any later version.
-
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
-
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
-*/
-
-/* This implements an i2c-core-like thing for ISA hardware monitoring
- chips. Such chips are linked to the i2c subsystem for historical
- reasons (because the early ISA hardware monitoring chips such as the
- LM78 had both an I2C and an ISA interface). They used to be
- registered with the main i2c-core, but as a first step in the
- direction of a clean separation between I2C and ISA chip drivers,
- we now have this separate core for ISA ones. It is significantly
- more simple than the real one, of course, because we don't have to
- handle multiple busses: there is only one (fake) ISA adapter.
- It is worth noting that we still rely on i2c-core for some things
- at the moment - but hopefully this won't last. */
-
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/i2c.h>
-#include <linux/i2c-isa.h>
-#include <linux/platform_device.h>
-#include <linux/completion.h>
-
-/* Exported by i2c-core for i2c-isa only */
-extern void i2c_adapter_dev_release(struct device *dev);
-extern struct class i2c_adapter_class;
-
-static u32 isa_func(struct i2c_adapter *adapter);
-
-/* This is the actual algorithm we define */
-static const struct i2c_algorithm isa_algorithm = {
- .functionality = isa_func,
-};
-
-/* There can only be one... */
-static struct i2c_adapter isa_adapter = {
- .owner = THIS_MODULE,
- .id = I2C_HW_ISA,
- .class = I2C_CLASS_HWMON,
- .algo = &isa_algorithm,
- .name = "ISA main adapter",
-};
-
-/* We can't do a thing... */
-static u32 isa_func(struct i2c_adapter *adapter)
-{
- return 0;
-}
-
-
-/* We implement an interface which resembles i2c_{add,del}_driver,
- but for i2c-isa drivers. We don't have to remember and handle lists
- of drivers and adapters so this is much more simple, of course. */
-
-int i2c_isa_add_driver(struct i2c_driver *driver)
-{
- int res;
-
- /* Add the driver to the list of i2c drivers in the driver core */
- driver->driver.bus = &i2c_bus_type;
- res = driver_register(&driver->driver);
- if (res)
- return res;
- dev_dbg(&isa_adapter.dev, "Driver %s registered\n", driver->driver.name);
-
- /* Now look for clients */
- res = driver->attach_adapter(&isa_adapter);
- if (res) {
- dev_dbg(&isa_adapter.dev,
- "Driver %s failed to attach adapter, unregistering\n",
- driver->driver.name);
- driver_unregister(&driver->driver);
- }
- return res;
-}
-
-int i2c_isa_del_driver(struct i2c_driver *driver)
-{
- struct list_head *item, *_n;
- struct i2c_client *client;
- int res;
-
- /* Detach all clients belonging to this one driver */
- list_for_each_safe(item, _n, &isa_adapter.clients) {
- client = list_entry(item, struct i2c_client, list);
- if (client->driver != driver)
- continue;
- dev_dbg(&isa_adapter.dev, "Detaching client %s at 0x%x\n",
- client->name, client->addr);
- if ((res = driver->detach_client(client))) {
- dev_err(&isa_adapter.dev, "Failed, driver "
- "%s not unregistered!\n",
- driver->driver.name);
- return res;
- }
- }
-
- /* Get the driver off the core list */
- driver_unregister(&driver->driver);
- dev_dbg(&isa_adapter.dev, "Driver %s unregistered\n", driver->driver.name);
-
- return 0;
-}
-
-
-static int __init i2c_isa_init(void)
-{
- int err;
-
- mutex_init(&isa_adapter.clist_lock);
- INIT_LIST_HEAD(&isa_adapter.clients);
-
- isa_adapter.nr = ANY_I2C_ISA_BUS;
- isa_adapter.dev.parent = &platform_bus;
- sprintf(isa_adapter.dev.bus_id, "i2c-%d", isa_adapter.nr);
- isa_adapter.dev.release = &i2c_adapter_dev_release;
- isa_adapter.dev.class = &i2c_adapter_class;
- err = device_register(&isa_adapter.dev);
- if (err) {
- printk(KERN_ERR "i2c-isa: Failed to register device\n");
- goto exit;
- }
-
- dev_dbg(&isa_adapter.dev, "%s registered\n", isa_adapter.name);
-
- return 0;
-
-exit:
- return err;
-}
-
-static void __exit i2c_isa_exit(void)
-{
-#ifdef DEBUG
- struct list_head *item, *_n;
- struct i2c_client *client = NULL;
-#endif
-
- /* There should be no more active client */
-#ifdef DEBUG
- dev_dbg(&isa_adapter.dev, "Looking for clients\n");
- list_for_each_safe(item, _n, &isa_adapter.clients) {
- client = list_entry(item, struct i2c_client, list);
- dev_err(&isa_adapter.dev, "Driver %s still has an active "
- "ISA client at 0x%x\n", client->driver->driver.name,
- client->addr);
- }
- if (client != NULL)
- return;
-#endif
-
- /* Clean up the sysfs representation */
- dev_dbg(&isa_adapter.dev, "Unregistering from sysfs\n");
- init_completion(&isa_adapter.dev_released);
- device_unregister(&isa_adapter.dev);
-
- /* Wait for sysfs to drop all references */
- dev_dbg(&isa_adapter.dev, "Waiting for sysfs completion\n");
- wait_for_completion(&isa_adapter.dev_released);
-
- dev_dbg(&isa_adapter.dev, "%s unregistered\n", isa_adapter.name);
-}
-
-EXPORT_SYMBOL(i2c_isa_add_driver);
-EXPORT_SYMBOL(i2c_isa_del_driver);
-
-MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
-MODULE_DESCRIPTION("ISA bus access through i2c");
-MODULE_LICENSE("GPL");
-
-module_init(i2c_isa_init);
-module_exit(i2c_isa_exit);
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index c6b6898592b1..851c3ed513d0 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -74,6 +74,25 @@ static irqreturn_t mpc_i2c_isr(int irq, void *dev_id)
return IRQ_HANDLED;
}
+/* Sometimes 9th clock pulse isn't generated, and slave doesn't release
+ * the bus, because it wants to send ACK.
+ * Following sequence of enabling/disabling and sending start/stop generates
+ * the pulse, so it's all OK.
+ */
+static void mpc_i2c_fixup(struct mpc_i2c *i2c)
+{
+ writeccr(i2c, 0);
+ udelay(30);
+ writeccr(i2c, CCR_MEN);
+ udelay(30);
+ writeccr(i2c, CCR_MSTA | CCR_MTX);
+ udelay(30);
+ writeccr(i2c, CCR_MSTA | CCR_MTX | CCR_MEN);
+ udelay(30);
+ writeccr(i2c, CCR_MEN);
+ udelay(30);
+}
+
static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
{
unsigned long orig_jiffies = jiffies;
@@ -153,6 +172,7 @@ static void mpc_i2c_start(struct mpc_i2c *i2c)
static void mpc_i2c_stop(struct mpc_i2c *i2c)
{
writeccr(i2c, CCR_MEN);
+ writeccr(i2c, 0);
}
static int mpc_write(struct mpc_i2c *i2c, int target,
@@ -245,6 +265,9 @@ static int mpc_xfer(struct i2c_adapter *adap, struct i2c_msg *msgs, int num)
}
if (time_after(jiffies, orig_jiffies + HZ)) {
pr_debug("I2C: timeout\n");
+ if (readb(i2c->base + MPC_I2C_SR) ==
+ (CSR_MCF | CSR_MBB | CSR_RXAK))
+ mpc_i2c_fixup(i2c);
return -EIO;
}
schedule();
@@ -327,9 +350,10 @@ static int fsl_i2c_probe(struct platform_device *pdev)
platform_set_drvdata(pdev, i2c);
i2c->adap = mpc_ops;
+ i2c->adap.nr = pdev->id;
i2c_set_adapdata(&i2c->adap, i2c);
i2c->adap.dev.parent = &pdev->dev;
- if ((result = i2c_add_adapter(&i2c->adap)) < 0) {
+ if ((result = i2c_add_numbered_adapter(&i2c->adap)) < 0) {
printk(KERN_ERR "i2c-mpc - failed to add adapter\n");
goto fail_add;
}
diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c
index a55b3335d1be..251154ae5d97 100644
--- a/drivers/i2c/busses/i2c-mv64xxx.c
+++ b/drivers/i2c/busses/i2c-mv64xxx.c
@@ -527,6 +527,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->adapter.class = I2C_CLASS_HWMON;
drv_data->adapter.timeout = pdata->timeout;
drv_data->adapter.retries = pdata->retries;
+ drv_data->adapter.nr = pd->id;
platform_set_drvdata(pd, drv_data);
i2c_set_adapdata(&drv_data->adapter, drv_data);
@@ -539,7 +540,7 @@ mv64xxx_i2c_probe(struct platform_device *pd)
drv_data->irq);
rc = -EINVAL;
goto exit_unmap_regs;
- } else if ((rc = i2c_add_adapter(&drv_data->adapter)) != 0) {
+ } else if ((rc = i2c_add_numbered_adapter(&drv_data->adapter)) != 0) {
dev_err(&drv_data->adapter.dev,
"mv64xxx: Can't add i2c adapter, rc: %d\n", -rc);
goto exit_free_irq;
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 3cd0d63e7b50..c48140f782d0 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -61,6 +61,7 @@ struct nforce2_smbus {
struct i2c_adapter adapter;
int base;
int size;
+ int blockops;
};
@@ -80,6 +81,8 @@ struct nforce2_smbus {
#define NVIDIA_SMB_ADDR (smbus->base + 0x02) /* address */
#define NVIDIA_SMB_CMD (smbus->base + 0x03) /* command */
#define NVIDIA_SMB_DATA (smbus->base + 0x04) /* 32 data registers */
+#define NVIDIA_SMB_BCNT (smbus->base + 0x24) /* number of data
+ bytes */
#define NVIDIA_SMB_STS_DONE 0x80
#define NVIDIA_SMB_STS_ALRM 0x40
@@ -92,6 +95,7 @@ struct nforce2_smbus {
#define NVIDIA_SMB_PRTCL_BYTE 0x04
#define NVIDIA_SMB_PRTCL_BYTE_DATA 0x06
#define NVIDIA_SMB_PRTCL_WORD_DATA 0x08
+#define NVIDIA_SMB_PRTCL_BLOCK_DATA 0x0a
#define NVIDIA_SMB_PRTCL_PEC 0x80
static struct pci_driver nforce2_driver;
@@ -103,6 +107,8 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
{
struct nforce2_smbus *smbus = adap->algo_data;
unsigned char protocol, pec, temp;
+ u8 len;
+ int i;
protocol = (read_write == I2C_SMBUS_READ) ? NVIDIA_SMB_PRTCL_READ :
NVIDIA_SMB_PRTCL_WRITE;
@@ -137,6 +143,25 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
protocol |= NVIDIA_SMB_PRTCL_WORD_DATA | pec;
break;
+ case I2C_SMBUS_BLOCK_DATA:
+ outb_p(command, NVIDIA_SMB_CMD);
+ if (read_write == I2C_SMBUS_WRITE) {
+ len = data->block[0];
+ if ((len == 0) || (len > I2C_SMBUS_BLOCK_MAX)) {
+ dev_err(&adap->dev,
+ "Transaction failed "
+ "(requested block size: %d)\n",
+ len);
+ return -1;
+ }
+ outb_p(len, NVIDIA_SMB_BCNT);
+ for (i = 0; i < I2C_SMBUS_BLOCK_MAX; i++)
+ outb_p(data->block[i + 1],
+ NVIDIA_SMB_DATA+i);
+ }
+ protocol |= NVIDIA_SMB_PRTCL_BLOCK_DATA | pec;
+ break;
+
default:
dev_err(&adap->dev, "Unsupported transaction %d\n", size);
return -1;
@@ -174,6 +199,14 @@ static s32 nforce2_access(struct i2c_adapter * adap, u16 addr,
case I2C_SMBUS_WORD_DATA:
data->word = inb_p(NVIDIA_SMB_DATA) | (inb_p(NVIDIA_SMB_DATA+1) << 8);
break;
+
+ case I2C_SMBUS_BLOCK_DATA:
+ len = inb_p(NVIDIA_SMB_BCNT);
+ len = min_t(u8, len, I2C_SMBUS_BLOCK_MAX);
+ for (i = 0; i < len; i++)
+ data->block[i+1] = inb_p(NVIDIA_SMB_DATA + i);
+ data->block[0] = len;
+ break;
}
return 0;
@@ -184,7 +217,9 @@ static u32 nforce2_func(struct i2c_adapter *adapter)
{
/* other functionality might be possible, but is not tested */
return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
- I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA;
+ I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
+ (((struct nforce2_smbus*)adapter->algo_data)->blockops ?
+ I2C_FUNC_SMBUS_BLOCK_DATA : 0);
}
static struct i2c_algorithm smbus_algorithm = {
@@ -268,6 +303,13 @@ static int __devinit nforce2_probe(struct pci_dev *dev, const struct pci_device_
return -ENOMEM;
pci_set_drvdata(dev, smbuses);
+ switch(dev->device) {
+ case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SMBUS:
+ case PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SMBUS:
+ smbuses[0].blockops = 1;
+ smbuses[1].blockops = 1;
+ }
+
/* SMBus adapter 1 */
res1 = nforce2_probe_smb(dev, 4, NFORCE_PCI_SMB1, &smbuses[0], "SMB1");
if (res1 < 0) {
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index 5a52bf5e3fb0..debc76cd2161 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -23,7 +23,7 @@
Supports:
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000
- ATI IXP200, IXP300, IXP400, SB600
+ ATI IXP200, IXP300, IXP400, SB600, SB700
SMSC Victory66
Note: we assume there can only be one device, with one SMBus interface.
@@ -399,6 +399,8 @@ static struct pci_device_id piix4_ids[] = {
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP600_SMBUS),
.driver_data = 0 },
+ { PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP700_SMBUS),
+ .driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4),
.driver_data = 0 },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_CSB5),
diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c
new file mode 100644
index 000000000000..17cecf1ea797
--- /dev/null
+++ b/drivers/i2c/busses/i2c-pmcmsp.c
@@ -0,0 +1,653 @@
+/*
+ * Specific bus support for PMC-TWI compliant implementation on MSP71xx.
+ *
+ * Copyright 2005-2007 PMC-Sierra, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/completion.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <asm/io.h>
+
+#define DRV_NAME "pmcmsptwi"
+
+#define MSP_TWI_SF_CLK_REG_OFFSET 0x00
+#define MSP_TWI_HS_CLK_REG_OFFSET 0x04
+#define MSP_TWI_CFG_REG_OFFSET 0x08
+#define MSP_TWI_CMD_REG_OFFSET 0x0c
+#define MSP_TWI_ADD_REG_OFFSET 0x10
+#define MSP_TWI_DAT_0_REG_OFFSET 0x14
+#define MSP_TWI_DAT_1_REG_OFFSET 0x18
+#define MSP_TWI_INT_STS_REG_OFFSET 0x1c
+#define MSP_TWI_INT_MSK_REG_OFFSET 0x20
+#define MSP_TWI_BUSY_REG_OFFSET 0x24
+
+#define MSP_TWI_INT_STS_DONE (1 << 0)
+#define MSP_TWI_INT_STS_LOST_ARBITRATION (1 << 1)
+#define MSP_TWI_INT_STS_NO_RESPONSE (1 << 2)
+#define MSP_TWI_INT_STS_DATA_COLLISION (1 << 3)
+#define MSP_TWI_INT_STS_BUSY (1 << 4)
+#define MSP_TWI_INT_STS_ALL 0x1f
+
+#define MSP_MAX_BYTES_PER_RW 8
+#define MSP_MAX_POLL 5
+#define MSP_POLL_DELAY 10
+#define MSP_IRQ_TIMEOUT (MSP_MAX_POLL * MSP_POLL_DELAY)
+
+/* IO Operation macros */
+#define pmcmsptwi_readl __raw_readl
+#define pmcmsptwi_writel __raw_writel
+
+/* TWI command type */
+enum pmcmsptwi_cmd_type {
+ MSP_TWI_CMD_WRITE = 0, /* Write only */
+ MSP_TWI_CMD_READ = 1, /* Read only */
+ MSP_TWI_CMD_WRITE_READ = 2, /* Write then Read */
+};
+
+/* The possible results of the xferCmd */
+enum pmcmsptwi_xfer_result {
+ MSP_TWI_XFER_OK = 0,
+ MSP_TWI_XFER_TIMEOUT,
+ MSP_TWI_XFER_BUSY,
+ MSP_TWI_XFER_DATA_COLLISION,
+ MSP_TWI_XFER_NO_RESPONSE,
+ MSP_TWI_XFER_LOST_ARBITRATION,
+};
+
+/* Corresponds to a PMCTWI clock configuration register */
+struct pmcmsptwi_clock {
+ u8 filter; /* Bits 15:12, default = 0x03 */
+ u16 clock; /* Bits 9:0, default = 0x001f */
+};
+
+struct pmcmsptwi_clockcfg {
+ struct pmcmsptwi_clock standard; /* The standard/fast clock config */
+ struct pmcmsptwi_clock highspeed; /* The highspeed clock config */
+};
+
+/* Corresponds to the main TWI configuration register */
+struct pmcmsptwi_cfg {
+ u8 arbf; /* Bits 15:12, default=0x03 */
+ u8 nak; /* Bits 11:8, default=0x03 */
+ u8 add10; /* Bit 7, default=0x00 */
+ u8 mst_code; /* Bits 6:4, default=0x00 */
+ u8 arb; /* Bit 1, default=0x01 */
+ u8 highspeed; /* Bit 0, default=0x00 */
+};
+
+/* A single pmctwi command to issue */
+struct pmcmsptwi_cmd {
+ u16 addr; /* The slave address (7 or 10 bits) */
+ enum pmcmsptwi_cmd_type type; /* The command type */
+ u8 write_len; /* Number of bytes in the write buffer */
+ u8 read_len; /* Number of bytes in the read buffer */
+ u8 *write_data; /* Buffer of characters to send */
+ u8 *read_data; /* Buffer to fill with incoming data */
+};
+
+/* The private data */
+struct pmcmsptwi_data {
+ void __iomem *iobase; /* iomapped base for IO */
+ int irq; /* IRQ to use (0 disables) */
+ struct completion wait; /* Completion for xfer */
+ struct mutex lock; /* Used for threadsafeness */
+ enum pmcmsptwi_xfer_result last_result; /* result of last xfer */
+};
+
+/* The default settings */
+const static struct pmcmsptwi_clockcfg pmcmsptwi_defclockcfg = {
+ .standard = {
+ .filter = 0x3,
+ .clock = 0x1f,
+ },
+ .highspeed = {
+ .filter = 0x3,
+ .clock = 0x1f,
+ },
+};
+
+const static struct pmcmsptwi_cfg pmcmsptwi_defcfg = {
+ .arbf = 0x03,
+ .nak = 0x03,
+ .add10 = 0x00,
+ .mst_code = 0x00,
+ .arb = 0x01,
+ .highspeed = 0x00,
+};
+
+static struct pmcmsptwi_data pmcmsptwi_data;
+
+static struct i2c_adapter pmcmsptwi_adapter;
+
+/* inline helper functions */
+static inline u32 pmcmsptwi_clock_to_reg(
+ const struct pmcmsptwi_clock *clock)
+{
+ return ((clock->filter & 0xf) << 12) | (clock->clock & 0x03ff);
+}
+
+static inline void pmcmsptwi_reg_to_clock(
+ u32 reg, struct pmcmsptwi_clock *clock)
+{
+ clock->filter = (reg >> 12) & 0xf;
+ clock->clock = reg & 0x03ff;
+}
+
+static inline u32 pmcmsptwi_cfg_to_reg(const struct pmcmsptwi_cfg *cfg)
+{
+ return ((cfg->arbf & 0xf) << 12) |
+ ((cfg->nak & 0xf) << 8) |
+ ((cfg->add10 & 0x1) << 7) |
+ ((cfg->mst_code & 0x7) << 4) |
+ ((cfg->arb & 0x1) << 1) |
+ (cfg->highspeed & 0x1);
+}
+
+static inline void pmcmsptwi_reg_to_cfg(u32 reg, struct pmcmsptwi_cfg *cfg)
+{
+ cfg->arbf = (reg >> 12) & 0xf;
+ cfg->nak = (reg >> 8) & 0xf;
+ cfg->add10 = (reg >> 7) & 0x1;
+ cfg->mst_code = (reg >> 4) & 0x7;
+ cfg->arb = (reg >> 1) & 0x1;
+ cfg->highspeed = reg & 0x1;
+}
+
+/*
+ * Sets the current clock configuration
+ */
+static void pmcmsptwi_set_clock_config(const struct pmcmsptwi_clockcfg *cfg,
+ struct pmcmsptwi_data *data)
+{
+ mutex_lock(&data->lock);
+ pmcmsptwi_writel(pmcmsptwi_clock_to_reg(&cfg->standard),
+ data->iobase + MSP_TWI_SF_CLK_REG_OFFSET);
+ pmcmsptwi_writel(pmcmsptwi_clock_to_reg(&cfg->highspeed),
+ data->iobase + MSP_TWI_HS_CLK_REG_OFFSET);
+ mutex_unlock(&data->lock);
+}
+
+/*
+ * Gets the current TWI bus configuration
+ */
+static void pmcmsptwi_get_twi_config(struct pmcmsptwi_cfg *cfg,
+ struct pmcmsptwi_data *data)
+{
+ mutex_lock(&data->lock);
+ pmcmsptwi_reg_to_cfg(pmcmsptwi_readl(
+ data->iobase + MSP_TWI_CFG_REG_OFFSET), cfg);
+ mutex_unlock(&data->lock);
+}
+
+/*
+ * Sets the current TWI bus configuration
+ */
+static void pmcmsptwi_set_twi_config(const struct pmcmsptwi_cfg *cfg,
+ struct pmcmsptwi_data *data)
+{
+ mutex_lock(&data->lock);
+ pmcmsptwi_writel(pmcmsptwi_cfg_to_reg(cfg),
+ data->iobase + MSP_TWI_CFG_REG_OFFSET);
+ mutex_unlock(&data->lock);
+}
+
+/*
+ * Parses the 'int_sts' register and returns a well-defined error code
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_get_result(u32 reg)
+{
+ if (reg & MSP_TWI_INT_STS_LOST_ARBITRATION) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: Lost arbitration\n");
+ return MSP_TWI_XFER_LOST_ARBITRATION;
+ } else if (reg & MSP_TWI_INT_STS_NO_RESPONSE) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: No response\n");
+ return MSP_TWI_XFER_NO_RESPONSE;
+ } else if (reg & MSP_TWI_INT_STS_DATA_COLLISION) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: Data collision\n");
+ return MSP_TWI_XFER_DATA_COLLISION;
+ } else if (reg & MSP_TWI_INT_STS_BUSY) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: Bus busy\n");
+ return MSP_TWI_XFER_BUSY;
+ }
+
+ dev_dbg(&pmcmsptwi_adapter.dev, "Result: Operation succeeded\n");
+ return MSP_TWI_XFER_OK;
+}
+
+/*
+ * In interrupt mode, handle the interrupt.
+ * NOTE: Assumes data->lock is held.
+ */
+static irqreturn_t pmcmsptwi_interrupt(int irq, void *ptr)
+{
+ struct pmcmsptwi_data *data = ptr;
+
+ u32 reason = pmcmsptwi_readl(data->iobase +
+ MSP_TWI_INT_STS_REG_OFFSET);
+ pmcmsptwi_writel(reason, data->iobase + MSP_TWI_INT_STS_REG_OFFSET);
+
+ dev_dbg(&pmcmsptwi_adapter.dev, "Got interrupt 0x%08x\n", reason);
+ if (!(reason & MSP_TWI_INT_STS_DONE))
+ return IRQ_NONE;
+
+ data->last_result = pmcmsptwi_get_result(reason);
+ complete(&data->wait);
+
+ return IRQ_HANDLED;
+}
+
+/*
+ * Probe for and register the device and return 0 if there is one.
+ */
+static int __devinit pmcmsptwi_probe(struct platform_device *pldev)
+{
+ struct resource *res;
+ int rc = -ENODEV;
+
+ /* get the static platform resources */
+ res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pldev->dev, "IOMEM resource not found\n");
+ goto ret_err;
+ }
+
+ /* reserve the memory region */
+ if (!request_mem_region(res->start, res->end - res->start + 1,
+ pldev->name)) {
+ dev_err(&pldev->dev,
+ "Unable to get memory/io address region 0x%08x\n",
+ res->start);
+ rc = -EBUSY;
+ goto ret_err;
+ }
+
+ /* remap the memory */
+ pmcmsptwi_data.iobase = ioremap_nocache(res->start,
+ res->end - res->start + 1);
+ if (!pmcmsptwi_data.iobase) {
+ dev_err(&pldev->dev,
+ "Unable to ioremap address 0x%08x\n", res->start);
+ rc = -EIO;
+ goto ret_unreserve;
+ }
+
+ /* request the irq */
+ pmcmsptwi_data.irq = platform_get_irq(pldev, 0);
+ if (pmcmsptwi_data.irq) {
+ rc = request_irq(pmcmsptwi_data.irq, &pmcmsptwi_interrupt,
+ IRQF_SHARED | IRQF_DISABLED | IRQF_SAMPLE_RANDOM,
+ pldev->name, &pmcmsptwi_data);
+ if (rc == 0) {
+ /*
+ * Enable 'DONE' interrupt only.
+ *
+ * If you enable all interrupts, you will get one on
+ * error and another when the operation completes.
+ * This way you only have to handle one interrupt,
+ * but you can still check all result flags.
+ */
+ pmcmsptwi_writel(MSP_TWI_INT_STS_DONE,
+ pmcmsptwi_data.iobase +
+ MSP_TWI_INT_MSK_REG_OFFSET);
+ } else {
+ dev_warn(&pldev->dev,
+ "Could not assign TWI IRQ handler "
+ "to irq %d (continuing with poll)\n",
+ pmcmsptwi_data.irq);
+ pmcmsptwi_data.irq = 0;
+ }
+ }
+
+ init_completion(&pmcmsptwi_data.wait);
+ mutex_init(&pmcmsptwi_data.lock);
+
+ pmcmsptwi_set_clock_config(&pmcmsptwi_defclockcfg, &pmcmsptwi_data);
+ pmcmsptwi_set_twi_config(&pmcmsptwi_defcfg, &pmcmsptwi_data);
+
+ printk(KERN_INFO DRV_NAME ": Registering MSP71xx I2C adapter\n");
+
+ pmcmsptwi_adapter.dev.parent = &pldev->dev;
+ platform_set_drvdata(pldev, &pmcmsptwi_adapter);
+ i2c_set_adapdata(&pmcmsptwi_adapter, &pmcmsptwi_data);
+
+ rc = i2c_add_adapter(&pmcmsptwi_adapter);
+ if (rc) {
+ dev_err(&pldev->dev, "Unable to register I2C adapter\n");
+ goto ret_unmap;
+ }
+
+ return 0;
+
+ret_unmap:
+ platform_set_drvdata(pldev, NULL);
+ if (pmcmsptwi_data.irq) {
+ pmcmsptwi_writel(0,
+ pmcmsptwi_data.iobase + MSP_TWI_INT_MSK_REG_OFFSET);
+ free_irq(pmcmsptwi_data.irq, &pmcmsptwi_data);
+ }
+
+ iounmap(pmcmsptwi_data.iobase);
+
+ret_unreserve:
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ret_err:
+ return rc;
+}
+
+/*
+ * Release the device and return 0 if there is one.
+ */
+static int __devexit pmcmsptwi_remove(struct platform_device *pldev)
+{
+ struct resource *res;
+
+ i2c_del_adapter(&pmcmsptwi_adapter);
+
+ platform_set_drvdata(pldev, NULL);
+ if (pmcmsptwi_data.irq) {
+ pmcmsptwi_writel(0,
+ pmcmsptwi_data.iobase + MSP_TWI_INT_MSK_REG_OFFSET);
+ free_irq(pmcmsptwi_data.irq, &pmcmsptwi_data);
+ }
+
+ iounmap(pmcmsptwi_data.iobase);
+
+ res = platform_get_resource(pldev, IORESOURCE_MEM, 0);
+ release_mem_region(res->start, res->end - res->start + 1);
+
+ return 0;
+}
+
+/*
+ * Polls the 'busy' register until the command is complete.
+ * NOTE: Assumes data->lock is held.
+ */
+static void pmcmsptwi_poll_complete(struct pmcmsptwi_data *data)
+{
+ int i;
+
+ for (i = 0; i < MSP_MAX_POLL; i++) {
+ u32 val = pmcmsptwi_readl(data->iobase +
+ MSP_TWI_BUSY_REG_OFFSET);
+ if (val == 0) {
+ u32 reason = pmcmsptwi_readl(data->iobase +
+ MSP_TWI_INT_STS_REG_OFFSET);
+ pmcmsptwi_writel(reason, data->iobase +
+ MSP_TWI_INT_STS_REG_OFFSET);
+ data->last_result = pmcmsptwi_get_result(reason);
+ return;
+ }
+ udelay(MSP_POLL_DELAY);
+ }
+
+ dev_dbg(&pmcmsptwi_adapter.dev, "Result: Poll timeout\n");
+ data->last_result = MSP_TWI_XFER_TIMEOUT;
+}
+
+/*
+ * Do the transfer (low level):
+ * May use interrupt-driven or polling, depending on if an IRQ is
+ * presently registered.
+ * NOTE: Assumes data->lock is held.
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_do_xfer(
+ u32 reg, struct pmcmsptwi_data *data)
+{
+ dev_dbg(&pmcmsptwi_adapter.dev, "Writing cmd reg 0x%08x\n", reg);
+ pmcmsptwi_writel(reg, data->iobase + MSP_TWI_CMD_REG_OFFSET);
+ if (data->irq) {
+ unsigned long timeleft = wait_for_completion_timeout(
+ &data->wait, MSP_IRQ_TIMEOUT);
+ if (timeleft == 0) {
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Result: IRQ timeout\n");
+ complete(&data->wait);
+ data->last_result = MSP_TWI_XFER_TIMEOUT;
+ }
+ } else
+ pmcmsptwi_poll_complete(data);
+
+ return data->last_result;
+}
+
+/*
+ * Helper routine, converts 'pmctwi_cmd' struct to register format
+ */
+static inline u32 pmcmsptwi_cmd_to_reg(const struct pmcmsptwi_cmd *cmd)
+{
+ return ((cmd->type & 0x3) << 8) |
+ (((cmd->write_len - 1) & 0x7) << 4) |
+ ((cmd->read_len - 1) & 0x7);
+}
+
+/*
+ * Do the transfer (high level)
+ */
+static enum pmcmsptwi_xfer_result pmcmsptwi_xfer_cmd(
+ struct pmcmsptwi_cmd *cmd,
+ struct pmcmsptwi_data *data)
+{
+ enum pmcmsptwi_xfer_result retval;
+
+ if ((cmd->type == MSP_TWI_CMD_WRITE && cmd->write_len == 0) ||
+ (cmd->type == MSP_TWI_CMD_READ && cmd->read_len == 0) ||
+ (cmd->type == MSP_TWI_CMD_WRITE_READ &&
+ (cmd->read_len == 0 || cmd->write_len == 0))) {
+ dev_err(&pmcmsptwi_adapter.dev,
+ "%s: Cannot transfer less than 1 byte\n",
+ __FUNCTION__);
+ return -EINVAL;
+ }
+
+ if (cmd->read_len > MSP_MAX_BYTES_PER_RW ||
+ cmd->write_len > MSP_MAX_BYTES_PER_RW) {
+ dev_err(&pmcmsptwi_adapter.dev,
+ "%s: Cannot transfer more than %d bytes\n",
+ __FUNCTION__, MSP_MAX_BYTES_PER_RW);
+ return -EINVAL;
+ }
+
+ mutex_lock(&data->lock);
+ dev_dbg(&pmcmsptwi_adapter.dev,
+ "Setting address to 0x%04x\n", cmd->addr);
+ pmcmsptwi_writel(cmd->addr, data->iobase + MSP_TWI_ADD_REG_OFFSET);
+
+ if (cmd->type == MSP_TWI_CMD_WRITE ||
+ cmd->type == MSP_TWI_CMD_WRITE_READ) {
+ __be64 tmp = cpu_to_be64p((u64 *)cmd->write_data);
+ tmp >>= (MSP_MAX_BYTES_PER_RW - cmd->write_len) * 8;
+ dev_dbg(&pmcmsptwi_adapter.dev, "Writing 0x%016llx\n", tmp);
+ pmcmsptwi_writel(tmp & 0x00000000ffffffffLL,
+ data->iobase + MSP_TWI_DAT_0_REG_OFFSET);
+ if (cmd->write_len > 4)
+ pmcmsptwi_writel(tmp >> 32,
+ data->iobase + MSP_TWI_DAT_1_REG_OFFSET);
+ }
+
+ retval = pmcmsptwi_do_xfer(pmcmsptwi_cmd_to_reg(cmd), data);
+ if (retval != MSP_TWI_XFER_OK)
+ goto xfer_err;
+
+ if (cmd->type == MSP_TWI_CMD_READ ||
+ cmd->type == MSP_TWI_CMD_WRITE_READ) {
+ int i;
+ u64 rmsk = ~(0xffffffffffffffffLL << (cmd->read_len * 8));
+ u64 tmp = (u64)pmcmsptwi_readl(data->iobase +
+ MSP_TWI_DAT_0_REG_OFFSET);
+ if (cmd->read_len > 4)
+ tmp |= (u64)pmcmsptwi_readl(data->iobase +
+ MSP_TWI_DAT_1_REG_OFFSET) << 32;
+ tmp &= rmsk;
+ dev_dbg(&pmcmsptwi_adapter.dev, "Read 0x%016llx\n", tmp);
+
+ for (i = 0; i < cmd->read_len; i++)
+ cmd->read_data[i] = tmp >> i;
+ }
+
+xfer_err:
+ mutex_unlock(&data->lock);
+
+ return retval;
+}
+
+/* -- Algorithm functions -- */
+
+/*
+ * Sends an i2c command out on the adapter
+ */
+static int pmcmsptwi_master_xfer(struct i2c_adapter *adap,
+ struct i2c_msg *msg, int num)
+{
+ struct pmcmsptwi_data *data = i2c_get_adapdata(adap);
+ struct pmcmsptwi_cmd cmd;
+ struct pmcmsptwi_cfg oldcfg, newcfg;
+ int ret;
+
+ if (num > 2) {
+ dev_dbg(&adap->dev, "%d messages unsupported\n", num);
+ return -EINVAL;
+ } else if (num == 2) {
+ /* Check for a dual write-then-read command */
+ struct i2c_msg *nextmsg = msg + 1;
+ if (!(msg->flags & I2C_M_RD) &&
+ (nextmsg->flags & I2C_M_RD) &&
+ msg->addr == nextmsg->addr) {
+ cmd.type = MSP_TWI_CMD_WRITE_READ;
+ cmd.write_len = msg->len;
+ cmd.write_data = msg->buf;
+ cmd.read_len = nextmsg->len;
+ cmd.read_data = nextmsg->buf;
+ } else {
+ dev_dbg(&adap->dev,
+ "Non write-read dual messages unsupported\n");
+ return -EINVAL;
+ }
+ } else if (msg->flags & I2C_M_RD) {
+ cmd.type = MSP_TWI_CMD_READ;
+ cmd.read_len = msg->len;
+ cmd.read_data = msg->buf;
+ cmd.write_len = 0;
+ cmd.write_data = NULL;
+ } else {
+ cmd.type = MSP_TWI_CMD_WRITE;
+ cmd.read_len = 0;
+ cmd.read_data = NULL;
+ cmd.write_len = msg->len;
+ cmd.write_data = msg->buf;
+ }
+
+ if (msg->len == 0) {
+ dev_err(&adap->dev, "Zero-byte messages unsupported\n");
+ return -EINVAL;
+ }
+
+ cmd.addr = msg->addr;
+
+ if (msg->flags & I2C_M_TEN) {
+ pmcmsptwi_get_twi_config(&newcfg, data);
+ memcpy(&oldcfg, &newcfg, sizeof(oldcfg));
+
+ /* Set the special 10-bit address flag */
+ newcfg.add10 = 1;
+
+ pmcmsptwi_set_twi_config(&newcfg, data);
+ }
+
+ /* Execute the command */
+ ret = pmcmsptwi_xfer_cmd(&cmd, data);
+
+ if (msg->flags & I2C_M_TEN)
+ pmcmsptwi_set_twi_config(&oldcfg, data);
+
+ dev_dbg(&adap->dev, "I2C %s of %d bytes ",
+ (msg->flags & I2C_M_RD) ? "read" : "write", msg->len);
+ if (ret != MSP_TWI_XFER_OK) {
+ /*
+ * TODO: We could potentially loop and retry in the case
+ * of MSP_TWI_XFER_TIMEOUT.
+ */
+ dev_dbg(&adap->dev, "failed\n");
+ return -1;
+ }
+
+ dev_dbg(&adap->dev, "succeeded\n");
+ return 0;
+}
+
+static u32 pmcmsptwi_i2c_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_I2C | I2C_FUNC_10BIT_ADDR |
+ I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA |
+ I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL;
+}
+
+/* -- Initialization -- */
+
+static struct i2c_algorithm pmcmsptwi_algo = {
+ .master_xfer = pmcmsptwi_master_xfer,
+ .functionality = pmcmsptwi_i2c_func,
+};
+
+static struct i2c_adapter pmcmsptwi_adapter = {
+ .owner = THIS_MODULE,
+ .class = I2C_CLASS_HWMON,
+ .algo = &pmcmsptwi_algo,
+ .name = DRV_NAME,
+};
+
+static struct platform_driver pmcmsptwi_driver = {
+ .probe = pmcmsptwi_probe,
+ .remove = __devexit_p(pmcmsptwi_remove),
+ .driver = {
+ .name = DRV_NAME,
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init pmcmsptwi_init(void)
+{
+ return platform_driver_register(&pmcmsptwi_driver);
+}
+
+static void __exit pmcmsptwi_exit(void)
+{
+ platform_driver_unregister(&pmcmsptwi_driver);
+}
+
+MODULE_DESCRIPTION("PMC MSP TWI/SMBus/I2C driver");
+MODULE_LICENSE("GPL");
+
+module_init(pmcmsptwi_init);
+module_exit(pmcmsptwi_exit);
diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c
index 1425d2245c82..0ab4f2627c26 100644
--- a/drivers/i2c/busses/i2c-powermac.c
+++ b/drivers/i2c/busses/i2c-powermac.c
@@ -121,8 +121,7 @@ static s32 i2c_powermac_smbus_xfer( struct i2c_adapter* adap,
if (rc)
goto bail;
rc = pmac_i2c_xfer(bus, addrdir, 1, command,
- read ? data->block : &data->block[1],
- data->block[0]);
+ &data->block[1], data->block[0]);
break;
default:
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index 28e7b91a4553..9d6b790d4321 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -921,7 +921,14 @@ static int i2c_pxa_probe(struct platform_device *dev)
i2c->adap.class = plat->class;
}
- ret = i2c_add_adapter(&i2c->adap);
+ /*
+ * If "dev->id" is negative we consider it as zero.
+ * The reason to do so is to avoid sysfs names that only make
+ * sense when there are multiple adapters.
+ */
+ i2c->adap.nr = dev->id >= 0 ? dev->id : 0;
+
+ ret = i2c_add_numbered_adapter(&i2c->adap);
if (ret < 0) {
printk(KERN_INFO "I2C: Failed to add bus\n");
goto eadapt;
diff --git a/drivers/i2c/busses/i2c-rpx.c b/drivers/i2c/busses/i2c-rpx.c
deleted file mode 100644
index 8764df06f51d..000000000000
--- a/drivers/i2c/busses/i2c-rpx.c
+++ /dev/null
@@ -1,101 +0,0 @@
-/*
- * Embedded Planet RPX Lite MPC8xx CPM I2C interface.
- * Copyright (c) 1999 Dan Malek (dmalek@jlc.net).
- *
- * moved into proper i2c interface;
- * Brad Parker (brad@heeltoe.com)
- *
- * RPX lite specific parts of the i2c interface
- * Update: There actually isn't anything RPXLite-specific about this module.
- * This should work for most any 8xx board. The console messages have been
- * changed to eliminate RPXLite references.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/stddef.h>
-#include <linux/i2c.h>
-#include <linux/i2c-algo-8xx.h>
-#include <asm/mpc8xx.h>
-#include <asm/commproc.h>
-
-
-static void
-rpx_iic_init(struct i2c_algo_8xx_data *data)
-{
- volatile cpm8xx_t *cp;
- volatile immap_t *immap;
-
- cp = cpmp; /* Get pointer to Communication Processor */
- immap = (immap_t *)IMAP_ADDR; /* and to internal registers */
-
- data->iip = (iic_t *)&cp->cp_dparam[PROFF_IIC];
-
- /* Check for and use a microcode relocation patch.
- */
- if ((data->reloc = data->iip->iic_rpbase))
- data->iip = (iic_t *)&cp->cp_dpmem[data->iip->iic_rpbase];
-
- data->i2c = (i2c8xx_t *)&(immap->im_i2c);
- data->cp = cp;
-
- /* Initialize Port B IIC pins.
- */
- cp->cp_pbpar |= 0x00000030;
- cp->cp_pbdir |= 0x00000030;
- cp->cp_pbodr |= 0x00000030;
-
- /* Allocate space for two transmit and two receive buffer
- * descriptors in the DP ram.
- */
- data->dp_addr = cpm_dpalloc(sizeof(cbd_t) * 4, 8);
-
- /* ptr to i2c area */
- data->i2c = (i2c8xx_t *)&(((immap_t *)IMAP_ADDR)->im_i2c);
-}
-
-static int rpx_install_isr(int irq, void (*func)(void *), void *data)
-{
- /* install interrupt handler */
- cpm_install_handler(irq, func, data);
-
- return 0;
-}
-
-static struct i2c_algo_8xx_data rpx_data = {
- .setisr = rpx_install_isr
-};
-
-static struct i2c_adapter rpx_ops = {
- .owner = THIS_MODULE,
- .name = "m8xx",
- .id = I2C_HW_MPC8XX_EPON,
- .algo_data = &rpx_data,
-};
-
-int __init i2c_rpx_init(void)
-{
- printk(KERN_INFO "i2c-rpx: i2c MPC8xx driver\n");
-
- /* reset hardware to sane state */
- rpx_iic_init(&rpx_data);
-
- if (i2c_8xx_add_bus(&rpx_ops) < 0) {
- printk(KERN_ERR "i2c-rpx: Unable to register with I2C\n");
- return -ENODEV;
- }
-
- return 0;
-}
-
-void __exit i2c_rpx_exit(void)
-{
- i2c_8xx_del_bus(&rpx_ops);
-}
-
-MODULE_AUTHOR("Dan Malek <dmalek@jlc.net>");
-MODULE_DESCRIPTION("I2C-Bus adapter routines for MPC8xx boards");
-
-module_init(i2c_rpx_init);
-module_exit(i2c_rpx_exit);
diff --git a/drivers/i2c/busses/i2c-savage4.c b/drivers/i2c/busses/i2c-savage4.c
index b7fb65c30112..8adf4abaa035 100644
--- a/drivers/i2c/busses/i2c-savage4.c
+++ b/drivers/i2c/busses/i2c-savage4.c
@@ -25,8 +25,6 @@
/* This interfaces to the I2C bus of the Savage4 to gain access to
the BT869 and possibly other I2C devices. The DDC bus is not
yet supported because its register is not memory-mapped.
- However we leave the DDC code here, commented out, to make
- it easier to add later.
*/
#include <linux/kernel.h>
@@ -37,36 +35,19 @@
#include <linux/i2c-algo-bit.h>
#include <asm/io.h>
-/* 3DFX defines */
-#define PCI_CHIP_SAVAGE3D 0x8A20
-#define PCI_CHIP_SAVAGE3D_MV 0x8A21
+/* device IDs */
#define PCI_CHIP_SAVAGE4 0x8A22
#define PCI_CHIP_SAVAGE2000 0x9102
-#define PCI_CHIP_PROSAVAGE_PM 0x8A25
-#define PCI_CHIP_PROSAVAGE_KM 0x8A26
-#define PCI_CHIP_SAVAGE_MX_MV 0x8c10
-#define PCI_CHIP_SAVAGE_MX 0x8c11
-#define PCI_CHIP_SAVAGE_IX_MV 0x8c12
-#define PCI_CHIP_SAVAGE_IX 0x8c13
#define REG 0xff20 /* Serial Port 1 Register */
/* bit locations in the register */
-#define DDC_ENAB 0x00040000
-#define DDC_SCL_OUT 0x00080000
-#define DDC_SDA_OUT 0x00100000
-#define DDC_SCL_IN 0x00200000
-#define DDC_SDA_IN 0x00400000
#define I2C_ENAB 0x00000020
#define I2C_SCL_OUT 0x00000001
#define I2C_SDA_OUT 0x00000002
#define I2C_SCL_IN 0x00000008
#define I2C_SDA_IN 0x00000010
-/* initialization states */
-#define INIT2 0x20
-#define INIT3 0x04
-
/* delays */
#define CYCLE_DELAY 10
#define TIMEOUT (HZ / 2)
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index a6feed449dbe..283769cecee2 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -129,6 +129,7 @@ MODULE_PARM_DESC(force_addr, "Initialize the base address of the i2c controller"
static struct pci_driver sis5595_driver;
static unsigned short sis5595_base;
+static struct pci_dev *sis5595_pdev;
static u8 sis5595_read(u8 reg)
{
@@ -379,6 +380,8 @@ MODULE_DEVICE_TABLE (pci, sis5595_ids);
static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_id *id)
{
+ int err;
+
if (sis5595_setup(dev)) {
dev_err(&dev->dev, "SIS5595 not detected, module not inserted.\n");
return -ENODEV;
@@ -389,20 +392,24 @@ static int __devinit sis5595_probe(struct pci_dev *dev, const struct pci_device_
sprintf(sis5595_adapter.name, "SMBus SIS5595 adapter at %04x",
sis5595_base + SMB_INDEX);
- return i2c_add_adapter(&sis5595_adapter);
-}
+ err = i2c_add_adapter(&sis5595_adapter);
+ if (err) {
+ release_region(sis5595_base + SMB_INDEX, 2);
+ return err;
+ }
-static void __devexit sis5595_remove(struct pci_dev *dev)
-{
- i2c_del_adapter(&sis5595_adapter);
- release_region(sis5595_base + SMB_INDEX, 2);
+ /* Always return failure here. This is to allow other drivers to bind
+ * to this pci device. We don't really want to have control over the
+ * pci device, we only wanted to read as few register values from it.
+ */
+ sis5595_pdev = pci_dev_get(dev);
+ return -ENODEV;
}
static struct pci_driver sis5595_driver = {
.name = "sis5595_smbus",
.id_table = sis5595_ids,
.probe = sis5595_probe,
- .remove = __devexit_p(sis5595_remove),
};
static int __init i2c_sis5595_init(void)
@@ -413,6 +420,12 @@ static int __init i2c_sis5595_init(void)
static void __exit i2c_sis5595_exit(void)
{
pci_unregister_driver(&sis5595_driver);
+ if (sis5595_pdev) {
+ i2c_del_adapter(&sis5595_adapter);
+ release_region(sis5595_base + SMB_INDEX, 2);
+ pci_dev_put(sis5595_pdev);
+ sis5595_pdev = NULL;
+ }
}
MODULE_AUTHOR("Frodo Looijaard <frodol@dds.nl>");
diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c
new file mode 100644
index 000000000000..1b0cfd5472fd
--- /dev/null
+++ b/drivers/i2c/busses/i2c-taos-evm.c
@@ -0,0 +1,330 @@
+/*
+ * Driver for the TAOS evaluation modules
+ * These devices include an I2C master which can be controlled over the
+ * serial port.
+ *
+ * Copyright (C) 2007 Jean Delvare <khali@linux-fr.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/input.h>
+#include <linux/serio.h>
+#include <linux/init.h>
+#include <linux/i2c.h>
+
+#define TAOS_BUFFER_SIZE 63
+
+#define TAOS_STATE_INIT 0
+#define TAOS_STATE_IDLE 1
+#define TAOS_STATE_SEND 2
+#define TAOS_STATE_RECV 3
+
+#define TAOS_CMD_RESET 0x12
+
+static DECLARE_WAIT_QUEUE_HEAD(wq);
+
+struct taos_data {
+ struct i2c_adapter adapter;
+ struct i2c_client *client;
+ int state;
+ u8 addr; /* last used address */
+ unsigned char buffer[TAOS_BUFFER_SIZE];
+ unsigned int pos; /* position inside the buffer */
+};
+
+/* TAOS TSL2550 EVM */
+static struct i2c_board_info tsl2550_info = {
+ I2C_BOARD_INFO("tsl2550", 0x39),
+ .type = "tsl2550",
+};
+
+/* Instantiate i2c devices based on the adapter name */
+static struct i2c_client *taos_instantiate_device(struct i2c_adapter *adapter)
+{
+ if (!strncmp(adapter->name, "TAOS TSL2550 EVM", 16)) {
+ dev_info(&adapter->dev, "Instantiating device %s at 0x%02x\n",
+ tsl2550_info.driver_name, tsl2550_info.addr);
+ return i2c_new_device(adapter, &tsl2550_info);
+ }
+
+ return NULL;
+}
+
+static int taos_smbus_xfer(struct i2c_adapter *adapter, u16 addr,
+ unsigned short flags, char read_write, u8 command,
+ int size, union i2c_smbus_data *data)
+{
+ struct serio *serio = adapter->algo_data;
+ struct taos_data *taos = serio_get_drvdata(serio);
+ char *p;
+
+ /* Encode our transaction. "@" is for the device address, "$" for the
+ SMBus command and "#" for the data. */
+ p = taos->buffer;
+
+ /* The device remembers the last used address, no need to send it
+ again if it's the same */
+ if (addr != taos->addr)
+ p += sprintf(p, "@%02X", addr);
+
+ switch (size) {
+ case I2C_SMBUS_BYTE:
+ if (read_write == I2C_SMBUS_WRITE)
+ sprintf(p, "$#%02X", command);
+ else
+ sprintf(p, "$");
+ break;
+ case I2C_SMBUS_BYTE_DATA:
+ if (read_write == I2C_SMBUS_WRITE)
+ sprintf(p, "$%02X#%02X", command, data->byte);
+ else
+ sprintf(p, "$%02X", command);
+ break;
+ default:
+ dev_dbg(&adapter->dev, "Unsupported transaction size %d\n",
+ size);
+ return -EINVAL;
+ }
+
+ /* Send the transaction to the TAOS EVM */
+ dev_dbg(&adapter->dev, "Command buffer: %s\n", taos->buffer);
+ taos->pos = 0;
+ taos->state = TAOS_STATE_SEND;
+ serio_write(serio, taos->buffer[0]);
+ wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+ msecs_to_jiffies(250));
+ if (taos->state != TAOS_STATE_IDLE) {
+ dev_err(&adapter->dev, "Transaction failed "
+ "(state=%d, pos=%d)\n", taos->state, taos->pos);
+ taos->addr = 0;
+ return -EIO;
+ }
+ taos->addr = addr;
+
+ /* Start the transaction and read the answer */
+ taos->pos = 0;
+ taos->state = TAOS_STATE_RECV;
+ serio_write(serio, read_write == I2C_SMBUS_WRITE ? '>' : '<');
+ wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+ msecs_to_jiffies(150));
+ if (taos->state != TAOS_STATE_IDLE
+ || taos->pos != 6) {
+ dev_err(&adapter->dev, "Transaction timeout (pos=%d)\n",
+ taos->pos);
+ return -EIO;
+ }
+ dev_dbg(&adapter->dev, "Answer buffer: %s\n", taos->buffer);
+
+ /* Interpret the returned string */
+ p = taos->buffer + 2;
+ p[3] = '\0';
+ if (!strcmp(p, "NAK"))
+ return -ENODEV;
+
+ if (read_write == I2C_SMBUS_WRITE) {
+ if (!strcmp(p, "ACK"))
+ return 0;
+ } else {
+ if (p[0] == 'x') {
+ data->byte = simple_strtol(p + 1, NULL, 16);
+ return 0;
+ }
+ }
+
+ return -EIO;
+}
+
+static u32 taos_smbus_func(struct i2c_adapter *adapter)
+{
+ return I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA;
+}
+
+static const struct i2c_algorithm taos_algorithm = {
+ .smbus_xfer = taos_smbus_xfer,
+ .functionality = taos_smbus_func,
+};
+
+static irqreturn_t taos_interrupt(struct serio *serio, unsigned char data,
+ unsigned int flags)
+{
+ struct taos_data *taos = serio_get_drvdata(serio);
+
+ switch (taos->state) {
+ case TAOS_STATE_INIT:
+ taos->buffer[taos->pos++] = data;
+ if (data == ':'
+ || taos->pos == TAOS_BUFFER_SIZE - 1) {
+ taos->buffer[taos->pos] = '\0';
+ taos->state = TAOS_STATE_IDLE;
+ wake_up_interruptible(&wq);
+ }
+ break;
+ case TAOS_STATE_SEND:
+ if (taos->buffer[++taos->pos])
+ serio_write(serio, taos->buffer[taos->pos]);
+ else {
+ taos->state = TAOS_STATE_IDLE;
+ wake_up_interruptible(&wq);
+ }
+ break;
+ case TAOS_STATE_RECV:
+ taos->buffer[taos->pos++] = data;
+ if (data == ']') {
+ taos->buffer[taos->pos] = '\0';
+ taos->state = TAOS_STATE_IDLE;
+ wake_up_interruptible(&wq);
+ }
+ break;
+ }
+
+ return IRQ_HANDLED;
+}
+
+/* Extract the adapter name from the buffer received after reset.
+ The buffer is modified and a pointer inside the buffer is returned. */
+static char *taos_adapter_name(char *buffer)
+{
+ char *start, *end;
+
+ start = strstr(buffer, "TAOS ");
+ if (!start)
+ return NULL;
+
+ end = strchr(start, '\r');
+ if (!end)
+ return NULL;
+ *end = '\0';
+
+ return start;
+}
+
+static int taos_connect(struct serio *serio, struct serio_driver *drv)
+{
+ struct taos_data *taos;
+ struct i2c_adapter *adapter;
+ char *name;
+ int err;
+
+ taos = kzalloc(sizeof(struct taos_data), GFP_KERNEL);
+ if (!taos) {
+ err = -ENOMEM;
+ goto exit;
+ }
+ taos->state = TAOS_STATE_INIT;
+ serio_set_drvdata(serio, taos);
+
+ err = serio_open(serio, drv);
+ if (err)
+ goto exit_kfree;
+
+ adapter = &taos->adapter;
+ adapter->owner = THIS_MODULE;
+ adapter->algo = &taos_algorithm;
+ adapter->algo_data = serio;
+ adapter->dev.parent = &serio->dev;
+
+ /* Reset the TAOS evaluation module to identify it */
+ serio_write(serio, TAOS_CMD_RESET);
+ wait_event_interruptible_timeout(wq, taos->state == TAOS_STATE_IDLE,
+ msecs_to_jiffies(2000));
+
+ if (taos->state != TAOS_STATE_IDLE) {
+ err = -ENODEV;
+ dev_dbg(&serio->dev, "TAOS EVM reset failed (state=%d, "
+ "pos=%d)\n", taos->state, taos->pos);
+ goto exit_close;
+ }
+
+ name = taos_adapter_name(taos->buffer);
+ if (!name) {
+ err = -ENODEV;
+ dev_err(&serio->dev, "TAOS EVM identification failed\n");
+ goto exit_close;
+ }
+ strlcpy(adapter->name, name, sizeof(adapter->name));
+
+ err = i2c_add_adapter(adapter);
+ if (err)
+ goto exit_close;
+ dev_dbg(&serio->dev, "Connected to TAOS EVM\n");
+
+ taos->client = taos_instantiate_device(adapter);
+ return 0;
+
+ exit_close:
+ serio_close(serio);
+ exit_kfree:
+ serio_set_drvdata(serio, NULL);
+ kfree(taos);
+ exit:
+ return err;
+}
+
+static void taos_disconnect(struct serio *serio)
+{
+ struct taos_data *taos = serio_get_drvdata(serio);
+
+ if (taos->client)
+ i2c_unregister_device(taos->client);
+ i2c_del_adapter(&taos->adapter);
+ serio_close(serio);
+ serio_set_drvdata(serio, NULL);
+ kfree(taos);
+
+ dev_dbg(&serio->dev, "Disconnected from TAOS EVM\n");
+}
+
+static struct serio_device_id taos_serio_ids[] = {
+ {
+ .type = SERIO_RS232,
+ .proto = SERIO_TAOSEVM,
+ .id = SERIO_ANY,
+ .extra = SERIO_ANY,
+ },
+ { 0 }
+};
+MODULE_DEVICE_TABLE(serio, taos_serio_ids);
+
+static struct serio_driver taos_drv = {
+ .driver = {
+ .name = "taos-evm",
+ },
+ .description = "TAOS evaluation module driver",
+ .id_table = taos_serio_ids,
+ .connect = taos_connect,
+ .disconnect = taos_disconnect,
+ .interrupt = taos_interrupt,
+};
+
+static int __init taos_init(void)
+{
+ return serio_register_driver(&taos_drv);
+}
+
+static void __exit taos_exit(void)
+{
+ serio_unregister_driver(&taos_drv);
+}
+
+MODULE_AUTHOR("Jean Delvare <khali@linux-fr.org>");
+MODULE_DESCRIPTION("TAOS evaluation module driver");
+MODULE_LICENSE("GPL");
+
+module_init(taos_init);
+module_exit(taos_exit);
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 7a2bc06304fc..edc275002f80 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -235,7 +235,7 @@ static s32 vt596_access(struct i2c_adapter *adap, u16 addr,
if (!(vt596_features & FEATURE_I2CBLOCK))
goto exit_unsupported;
if (read_write == I2C_SMBUS_READ)
- outb_p(I2C_SMBUS_BLOCK_MAX, SMBHSTDAT0);
+ outb_p(data->block[0], SMBHSTDAT0);
/* Fall through */
case I2C_SMBUS_BLOCK_DATA:
outb_p(command, SMBHSTCMD);
@@ -397,8 +397,7 @@ found:
case PCI_DEVICE_ID_VIA_82C686_4:
/* The VT82C686B (rev 0x40) does support I2C block
transactions, but the VT82C686A (rev 0x30) doesn't */
- if (!pci_read_config_byte(pdev, PCI_REVISION_ID, &temp)
- && temp >= 0x40)
+ if (pdev->revision >= 0x40)
vt596_features |= FEATURE_I2CBLOCK;
break;
}
diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c
index 0d6bd4f7b7fa..e6c4a2b762ec 100644
--- a/drivers/i2c/busses/scx200_acb.c
+++ b/drivers/i2c/busses/scx200_acb.c
@@ -310,8 +310,6 @@ static s32 scx200_acb_smbus_xfer(struct i2c_adapter *adapter,
break;
case I2C_SMBUS_I2C_BLOCK_DATA:
- if (rw == I2C_SMBUS_READ)
- data->block[0] = I2C_SMBUS_BLOCK_MAX; /* For now */
len = data->block[0];
if (len == 0 || len > I2C_SMBUS_BLOCK_MAX)
return -EINVAL;
@@ -388,7 +386,7 @@ static const struct i2c_algorithm scx200_acb_algorithm = {
};
static struct scx200_acb_iface *scx200_acb_list;
-static DECLARE_MUTEX(scx200_acb_list_mutex);
+static DEFINE_MUTEX(scx200_acb_list_mutex);
static __init int scx200_acb_probe(struct scx200_acb_iface *iface)
{
@@ -472,10 +470,10 @@ static int __init scx200_acb_create(struct scx200_acb_iface *iface)
return -ENODEV;
}
- down(&scx200_acb_list_mutex);
+ mutex_lock(&scx200_acb_list_mutex);
iface->next = scx200_acb_list;
scx200_acb_list = iface;
- up(&scx200_acb_list_mutex);
+ mutex_unlock(&scx200_acb_list_mutex);
return 0;
}
@@ -633,10 +631,10 @@ static void __exit scx200_acb_cleanup(void)
{
struct scx200_acb_iface *iface;
- down(&scx200_acb_list_mutex);
+ mutex_lock(&scx200_acb_list_mutex);
while ((iface = scx200_acb_list) != NULL) {
scx200_acb_list = iface->next;
- up(&scx200_acb_list_mutex);
+ mutex_unlock(&scx200_acb_list_mutex);
i2c_del_adapter(&iface->adapter);
@@ -648,9 +646,9 @@ static void __exit scx200_acb_cleanup(void)
release_region(iface->base, 8);
kfree(iface);
- down(&scx200_acb_list_mutex);
+ mutex_lock(&scx200_acb_list_mutex);
}
- up(&scx200_acb_list_mutex);
+ mutex_unlock(&scx200_acb_list_mutex);
}
module_init(scx200_acb_init);
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.