diff options
Diffstat (limited to 'drivers/i2c/chips/adm1021.c')
| -rw-r--r-- | drivers/i2c/chips/adm1021.c | 402 |
1 files changed, 0 insertions, 402 deletions
diff --git a/drivers/i2c/chips/adm1021.c b/drivers/i2c/chips/adm1021.c deleted file mode 100644 index d2c774c32f45..000000000000 --- a/drivers/i2c/chips/adm1021.c +++ /dev/null @@ -1,402 +0,0 @@ -/* - adm1021.c - Part of lm_sensors, Linux kernel modules for hardware - monitoring - Copyright (c) 1998, 1999 Frodo Looijaard <frodol@dds.nl> and - Philip Edelbrock <phil@netroedge.com> - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. -*/ - -#include <linux/module.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <linux/jiffies.h> -#include <linux/i2c.h> -#include <linux/i2c-sensor.h> - - -/* Addresses to scan */ -static unsigned short normal_i2c[] = { 0x18, 0x19, 0x1a, - 0x29, 0x2a, 0x2b, - 0x4c, 0x4d, 0x4e, - I2C_CLIENT_END }; -static unsigned int normal_isa[] = { I2C_CLIENT_ISA_END }; - -/* Insmod parameters */ -SENSORS_INSMOD_8(adm1021, adm1023, max1617, max1617a, thmc10, lm84, gl523sm, mc1066); - -/* adm1021 constants specified below */ - -/* The adm1021 registers */ -/* Read-only */ -#define ADM1021_REG_TEMP 0x00 -#define ADM1021_REG_REMOTE_TEMP 0x01 -#define ADM1021_REG_STATUS 0x02 -#define ADM1021_REG_MAN_ID 0x0FE /* 0x41 = AMD, 0x49 = TI, 0x4D = Maxim, 0x23 = Genesys , 0x54 = Onsemi*/ -#define ADM1021_REG_DEV_ID 0x0FF /* ADM1021 = 0x0X, ADM1023 = 0x3X */ -#define ADM1021_REG_DIE_CODE 0x0FF /* MAX1617A */ -/* These use different addresses for reading/writing */ -#define ADM1021_REG_CONFIG_R 0x03 -#define ADM1021_REG_CONFIG_W 0x09 -#define ADM1021_REG_CONV_RATE_R 0x04 -#define ADM1021_REG_CONV_RATE_W 0x0A -/* These are for the ADM1023's additional precision on the remote temp sensor */ -#define ADM1021_REG_REM_TEMP_PREC 0x010 -#define ADM1021_REG_REM_OFFSET 0x011 -#define ADM1021_REG_REM_OFFSET_PREC 0x012 -#define ADM1021_REG_REM_TOS_PREC 0x013 -#define ADM1021_REG_REM_THYST_PREC 0x014 -/* limits */ -#define ADM1021_REG_TOS_R 0x05 -#define ADM1021_REG_TOS_W 0x0B -#define ADM1021_REG_REMOTE_TOS_R 0x07 -#define ADM1021_REG_REMOTE_TOS_W 0x0D -#define ADM1021_REG_THYST_R 0x06 -#define ADM1021_REG_THYST_W 0x0C -#define ADM1021_REG_REMOTE_THYST_R 0x08 -#define ADM1021_REG_REMOTE_THYST_W 0x0E -/* write-only */ -#define ADM1021_REG_ONESHOT 0x0F - - -/* Conversions. Rounding and limit checking is only done on the TO_REG - variants. Note that you should be a bit careful with which arguments - these macros are called: arguments may be evaluated more than once. - Fixing this is just not worth it. */ -/* Conversions note: 1021 uses normal integer signed-byte format*/ -#define TEMP_FROM_REG(val) (val > 127 ? (val-256)*1000 : val*1000) -#define TEMP_TO_REG(val) (SENSORS_LIMIT((val < 0 ? (val/1000)+256 : val/1000),0,255)) - -/* Initial values */ - -/* Note: Even though I left the low and high limits named os and hyst, -they don't quite work like a thermostat the way the LM75 does. I.e., -a lower temp than THYST actually triggers an alarm instead of -clearing it. Weird, ey? --Phil */ - -/* Each client has this additional data */ -struct adm1021_data { - struct i2c_client client; - enum chips type; - - struct semaphore update_lock; - char valid; /* !=0 if following fields are valid */ - unsigned long last_updated; /* In jiffies */ - - u8 temp_max; /* Register values */ - u8 temp_hyst; - u8 temp_input; - u8 remote_temp_max; - u8 remote_temp_hyst; - u8 remote_temp_input; - u8 alarms; - /* Special values for ADM1023 only */ - u8 remote_temp_prec; - u8 remote_temp_os_prec; - u8 remote_temp_hyst_prec; - u8 remote_temp_offset; - u8 remote_temp_offset_prec; -}; - -static int adm1021_attach_adapter(struct i2c_adapter *adapter); -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind); -static void adm1021_init_client(struct i2c_client *client); -static int adm1021_detach_client(struct i2c_client *client); -static int adm1021_read_value(struct i2c_client *client, u8 reg); -static int adm1021_write_value(struct i2c_client *client, u8 reg, - u16 value); -static struct adm1021_data *adm1021_update_device(struct device *dev); - -/* (amalysh) read only mode, otherwise any limit's writing confuse BIOS */ -static int read_only = 0; - - -/* This is the driver that will be inserted */ -static struct i2c_driver adm1021_driver = { - .owner = THIS_MODULE, - .name = "adm1021", - .id = I2C_DRIVERID_ADM1021, - .flags = I2C_DF_NOTIFY, - .attach_adapter = adm1021_attach_adapter, - .detach_client = adm1021_detach_client, -}; - -#define show(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1021_data *data = adm1021_update_device(dev); \ - return sprintf(buf, "%d\n", TEMP_FROM_REG(data->value)); \ -} -show(temp_max); -show(temp_hyst); -show(temp_input); -show(remote_temp_max); -show(remote_temp_hyst); -show(remote_temp_input); - -#define show2(value) \ -static ssize_t show_##value(struct device *dev, struct device_attribute *attr, char *buf) \ -{ \ - struct adm1021_data *data = adm1021_update_device(dev); \ - return sprintf(buf, "%d\n", data->value); \ -} -show2(alarms); - -#define set(value, reg) \ -static ssize_t set_##value(struct device *dev, struct device_attribute *attr, const char *buf, size_t count) \ -{ \ - struct i2c_client *client = to_i2c_client(dev); \ - struct adm1021_data *data = i2c_get_clientdata(client); \ - int temp = simple_strtoul(buf, NULL, 10); \ - \ - down(&data->update_lock); \ - data->value = TEMP_TO_REG(temp); \ - adm1021_write_value(client, reg, data->value); \ - up(&data->update_lock); \ - return count; \ -} -set(temp_max, ADM1021_REG_TOS_W); -set(temp_hyst, ADM1021_REG_THYST_W); -set(remote_temp_max, ADM1021_REG_REMOTE_TOS_W); -set(remote_temp_hyst, ADM1021_REG_REMOTE_THYST_W); - -static DEVICE_ATTR(temp1_max, S_IWUSR | S_IRUGO, show_temp_max, set_temp_max); -static DEVICE_ATTR(temp1_min, S_IWUSR | S_IRUGO, show_temp_hyst, set_temp_hyst); -static DEVICE_ATTR(temp1_input, S_IRUGO, show_temp_input, NULL); -static DEVICE_ATTR(temp2_max, S_IWUSR | S_IRUGO, show_remote_temp_max, set_remote_temp_max); -static DEVICE_ATTR(temp2_min, S_IWUSR | S_IRUGO, show_remote_temp_hyst, set_remote_temp_hyst); -static DEVICE_ATTR(temp2_input, S_IRUGO, show_remote_temp_input, NULL); -static DEVICE_ATTR(alarms, S_IRUGO, show_alarms, NULL); - - -static int adm1021_attach_adapter(struct i2c_adapter *adapter) -{ - if (!(adapter->class & I2C_CLASS_HWMON)) - return 0; - return i2c_detect(adapter, &addr_data, adm1021_detect); -} - -static int adm1021_detect(struct i2c_adapter *adapter, int address, int kind) -{ - int i; - struct i2c_client *new_client; - struct adm1021_data *data; - int err = 0; - const char *type_name = ""; - - /* Make sure we aren't probing the ISA bus!! This is just a safety check - at this moment; i2c_detect really won't call us. */ -#ifdef DEBUG - if (i2c_is_isa_adapter(adapter)) { - dev_dbg(&adapter->dev, "adm1021_detect called for an ISA bus adapter?!?\n"); - return 0; - } -#endif - - if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_BYTE_DATA)) - goto error0; - - /* OK. For now, we presume we have a valid client. We now create the - client structure, even though we cannot fill it completely yet. - But it allows us to access adm1021_{read,write}_value. */ - - if (!(data = kmalloc(sizeof(struct adm1021_data), GFP_KERNEL))) { - err = -ENOMEM; - goto error0; - } - memset(data, 0, sizeof(struct adm1021_data)); - - new_client = &data->client; - i2c_set_clientdata(new_client, data); - new_client->addr = address; - new_client->adapter = adapter; - new_client->driver = &adm1021_driver; - new_client->flags = 0; - - /* Now, we do the remaining detection. */ - if (kind < 0) { - if ((adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0x03) != 0x00 - || (adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x3F) != 0x00 - || (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) & 0xF8) != 0x00) { - err = -ENODEV; - goto error1; - } - } - - /* Determine the chip type. */ - if (kind <= 0) { - i = adm1021_read_value(new_client, ADM1021_REG_MAN_ID); - if (i == 0x41) - if ((adm1021_read_value(new_client, ADM1021_REG_DEV_ID) & 0x0F0) == 0x030) - kind = adm1023; - else - kind = adm1021; - else if (i == 0x49) - kind = thmc10; - else if (i == 0x23) - kind = gl523sm; - else if ((i == 0x4d) && - (adm1021_read_value(new_client, ADM1021_REG_DEV_ID) == 0x01)) - kind = max1617a; - else if (i == 0x54) - kind = mc1066; - /* LM84 Mfr ID in a different place, and it has more unused bits */ - else if (adm1021_read_value(new_client, ADM1021_REG_CONV_RATE_R) == 0x00 - && (kind == 0 /* skip extra detection */ - || ((adm1021_read_value(new_client, ADM1021_REG_CONFIG_R) & 0x7F) == 0x00 - && (adm1021_read_value(new_client, ADM1021_REG_STATUS) & 0xAB) == 0x00))) - kind = lm84; - else - kind = max1617; - } - - if (kind == max1617) { - type_name = "max1617"; - } else if (kind == max1617a) { - type_name = "max1617a"; - } else if (kind == adm1021) { - type_name = "adm1021"; - } else if (kind == adm1023) { - type_name = "adm1023"; - } else if (kind == thmc10) { - type_name = "thmc10"; - } else if (kind == lm84) { - type_name = "lm84"; - } else if (kind == gl523sm) { - type_name = "gl523sm"; - } else if (kind == mc1066) { - type_name = "mc1066"; - } - - /* Fill in the remaining client fields and put it into the global list */ - strlcpy(new_client->name, type_name, I2C_NAME_SIZE); - data->type = kind; - data->valid = 0; - init_MUTEX(&data->update_lock); - - /* Tell the I2C layer a new client has arrived */ - if ((err = i2c_attach_client(new_client))) - goto error1; - - /* Initialize the ADM1021 chip */ - if (kind != lm84) - adm1021_init_client(new_client); - - /* Register sysfs hooks */ - device_create_file(&new_client->dev, &dev_attr_temp1_max); - device_create_file(&new_client->dev, &dev_attr_temp1_min); - device_create_file(&new_client->dev, &dev_attr_temp1_input); - device_create_file(&new_client->dev, &dev_attr_temp2_max); - device_create_file(&new_client->dev, &dev_attr_temp2_min); - device_create_file(&new_client->dev, &dev_attr_temp2_input); - device_create_file(&new_client->dev, &dev_attr_alarms); - - return 0; - -error1: - kfree(data); -error0: - return err; -} - -static void adm1021_init_client(struct i2c_client *client) -{ - /* Enable ADC and disable suspend mode */ - adm1021_write_value(client, ADM1021_REG_CONFIG_W, - adm1021_read_value(client, ADM1021_REG_CONFIG_R) & 0xBF); - /* Set Conversion rate to 1/sec (this can be tinkered with) */ - adm1021_write_value(client, ADM1021_REG_CONV_RATE_W, 0x04); -} - -static int adm1021_detach_client(struct i2c_client *client) -{ - int err; - - if ((err = i2c_detach_client(client))) { - dev_err(&client->dev, "Client deregistration failed, client not detached.\n"); - return err; - } - - kfree(i2c_get_clientdata(client)); - return 0; -} - -/* All registers are byte-sized */ -static int adm1021_read_value(struct i2c_client *client, u8 reg) -{ - return i2c_smbus_read_byte_data(client, reg); -} - -static int adm1021_write_value(struct i2c_client *client, u8 reg, u16 value) -{ - if (!read_only) - return i2c_smbus_write_byte_data(client, reg, value); - return 0; -} - -static struct adm1021_data *adm1021_update_device(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct adm1021_data *data = i2c_get_clientdata(client); - - down(&data->update_lock); - - if (time_after(jiffies, data->last_updated + HZ + HZ / 2) - || !data->valid) { - dev_dbg(&client->dev, "Starting adm1021 update\n"); - - data->temp_input = adm1021_read_value(client, ADM1021_REG_TEMP); - data->temp_max = adm1021_read_value(client, ADM1021_REG_TOS_R); - data->temp_hyst = adm1021_read_value(client, ADM1021_REG_THYST_R); - data->remote_temp_input = adm1021_read_value(client, ADM1021_REG_REMOTE_TEMP); - data->remote_temp_max = adm1021_read_value(client, ADM1021_REG_REMOTE_TOS_R); - data->remote_temp_hyst = adm1021_read_value(client, ADM1021_REG_REMOTE_THYST_R); - data->alarms = adm1021_read_value(client, ADM1021_REG_STATUS) & 0x7c; - if (data->type == adm1023) { - data->remote_temp_prec = adm1021_read_value(client, ADM1021_REG_REM_TEMP_PREC); - data->remote_temp_os_prec = adm1021_read_value(client, ADM1021_REG_REM_TOS_PREC); - data->remote_temp_hyst_prec = adm1021_read_value(client, ADM1021_REG_REM_THYST_PREC); - data->remote_temp_offset = adm1021_read_value(client, ADM1021_REG_REM_OFFSET); - data->remote_temp_offset_prec = adm1021_read_value(client, ADM1021_REG_REM_OFFSET_PREC); - } - data->last_updated = jiffies; - data->valid = 1; - } - - up(&data->update_lock); - - return data; -} - -static int __init sensors_adm1021_init(void) -{ - return i2c_add_driver(&adm1021_driver); -} - -static void __exit sensors_adm1021_exit(void) -{ - i2c_del_driver(&adm1021_driver); -} - -MODULE_AUTHOR ("Frodo Looijaard <frodol@dds.nl> and " - "Philip Edelbrock <phil@netroedge.com>"); -MODULE_DESCRIPTION("adm1021 driver"); -MODULE_LICENSE("GPL"); - -module_param(read_only, bool, 0); -MODULE_PARM_DESC(read_only, "Don't set any values, read only mode"); - -module_init(sensors_adm1021_init) -module_exit(sensors_adm1021_exit) |