aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/i2c
diff options
context:
space:
mode:
Diffstat (limited to 'drivers/i2c')
-rw-r--r--drivers/i2c/busses/i2c-aspeed.c54
-rw-r--r--drivers/i2c/busses/i2c-mt65xx.c2
-rw-r--r--drivers/i2c/busses/i2c-stm32f7.c21
3 files changed, 48 insertions, 29 deletions
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
index fa66951b05d0..7b098ff5f5dd 100644
--- a/drivers/i2c/busses/i2c-aspeed.c
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -108,6 +108,12 @@
#define ASPEED_I2CD_S_TX_CMD BIT(2)
#define ASPEED_I2CD_M_TX_CMD BIT(1)
#define ASPEED_I2CD_M_START_CMD BIT(0)
+#define ASPEED_I2CD_MASTER_CMDS_MASK \
+ (ASPEED_I2CD_M_STOP_CMD | \
+ ASPEED_I2CD_M_S_RX_CMD_LAST | \
+ ASPEED_I2CD_M_RX_CMD | \
+ ASPEED_I2CD_M_TX_CMD | \
+ ASPEED_I2CD_M_START_CMD)
/* 0x18 : I2CD Slave Device Address Register */
#define ASPEED_I2CD_DEV_ADDR_MASK GENMASK(6, 0)
@@ -336,18 +342,19 @@ static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
u8 slave_addr = i2c_8bit_addr_from_msg(msg);
- bus->master_state = ASPEED_I2C_MASTER_START;
-
#if IS_ENABLED(CONFIG_I2C_SLAVE)
/*
* If it's requested in the middle of a slave session, set the master
* state to 'pending' then H/W will continue handling this master
* command when the bus comes back to the idle state.
*/
- if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE)
+ if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE) {
bus->master_state = ASPEED_I2C_MASTER_PENDING;
+ return;
+ }
#endif /* CONFIG_I2C_SLAVE */
+ bus->master_state = ASPEED_I2C_MASTER_START;
bus->buf_index = 0;
if (msg->flags & I2C_M_RD) {
@@ -422,20 +429,6 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
}
}
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
- /*
- * A pending master command will be started by H/W when the bus comes
- * back to idle state after completing a slave operation so change the
- * master state from 'pending' to 'start' at here if slave is inactive.
- */
- if (bus->master_state == ASPEED_I2C_MASTER_PENDING) {
- if (bus->slave_state != ASPEED_I2C_SLAVE_INACTIVE)
- goto out_no_complete;
-
- bus->master_state = ASPEED_I2C_MASTER_START;
- }
-#endif /* CONFIG_I2C_SLAVE */
-
/* Master is not currently active, irq was for someone else. */
if (bus->master_state == ASPEED_I2C_MASTER_INACTIVE ||
bus->master_state == ASPEED_I2C_MASTER_PENDING)
@@ -462,11 +455,15 @@ static u32 aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus, u32 irq_status)
#if IS_ENABLED(CONFIG_I2C_SLAVE)
/*
* If a peer master starts a xfer immediately after it queues a
- * master command, change its state to 'pending' then H/W will
- * continue the queued master xfer just after completing the
- * slave mode session.
+ * master command, clear the queued master command and change
+ * its state to 'pending'. To simplify handling of pending
+ * cases, it uses S/W solution instead of H/W command queue
+ * handling.
*/
if (unlikely(irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH)) {
+ writel(readl(bus->base + ASPEED_I2C_CMD_REG) &
+ ~ASPEED_I2CD_MASTER_CMDS_MASK,
+ bus->base + ASPEED_I2C_CMD_REG);
bus->master_state = ASPEED_I2C_MASTER_PENDING;
dev_dbg(bus->dev,
"master goes pending due to a slave start\n");
@@ -629,6 +626,14 @@ static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
irq_handled |= aspeed_i2c_master_irq(bus,
irq_remaining);
}
+
+ /*
+ * Start a pending master command at here if a slave operation is
+ * completed.
+ */
+ if (bus->master_state == ASPEED_I2C_MASTER_PENDING &&
+ bus->slave_state == ASPEED_I2C_SLAVE_INACTIVE)
+ aspeed_i2c_do_start(bus);
#else
irq_handled = aspeed_i2c_master_irq(bus, irq_remaining);
#endif /* CONFIG_I2C_SLAVE */
@@ -691,6 +696,15 @@ static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
ASPEED_I2CD_BUS_BUSY_STS))
aspeed_i2c_recover_bus(bus);
+ /*
+ * If timed out and the state is still pending, drop the pending
+ * master command.
+ */
+ spin_lock_irqsave(&bus->lock, flags);
+ if (bus->master_state == ASPEED_I2C_MASTER_PENDING)
+ bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+ spin_unlock_irqrestore(&bus->lock, flags);
+
return -ETIMEDOUT;
}
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index 29eae1bf4f86..2152ec5f535c 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -875,7 +875,7 @@ static irqreturn_t mtk_i2c_irq(int irqno, void *dev_id)
static u32 mtk_i2c_functionality(struct i2c_adapter *adap)
{
- if (adap->quirks->flags & I2C_AQ_NO_ZERO_LEN)
+ if (i2c_check_quirks(adap, I2C_AQ_NO_ZERO_LEN))
return I2C_FUNC_I2C |
(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
else
diff --git a/drivers/i2c/busses/i2c-stm32f7.c b/drivers/i2c/busses/i2c-stm32f7.c
index d36cf08461f7..b24e7b937f21 100644
--- a/drivers/i2c/busses/i2c-stm32f7.c
+++ b/drivers/i2c/busses/i2c-stm32f7.c
@@ -305,7 +305,7 @@ struct stm32f7_i2c_dev {
struct regmap *regmap;
};
-/**
+/*
* All these values are coming from I2C Specification, Version 6.0, 4th of
* April 2014.
*
@@ -1192,6 +1192,8 @@ static void stm32f7_i2c_slave_start(struct stm32f7_i2c_dev *i2c_dev)
STM32F7_I2C_CR1_TXIE;
stm32f7_i2c_set_bits(base + STM32F7_I2C_CR1, mask);
+ /* Write 1st data byte */
+ writel_relaxed(value, base + STM32F7_I2C_TXDR);
} else {
/* Notify i2c slave that new write transfer is starting */
i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
@@ -1501,7 +1503,7 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
void __iomem *base = i2c_dev->base;
struct device *dev = i2c_dev->dev;
struct stm32_i2c_dma *dma = i2c_dev->dma;
- u32 mask, status;
+ u32 status;
status = readl_relaxed(i2c_dev->base + STM32F7_I2C_ISR);
@@ -1526,12 +1528,15 @@ static irqreturn_t stm32f7_i2c_isr_error(int irq, void *data)
f7_msg->result = -EINVAL;
}
- /* Disable interrupts */
- if (stm32f7_i2c_is_slave_registered(i2c_dev))
- mask = STM32F7_I2C_XFER_IRQ_MASK;
- else
- mask = STM32F7_I2C_ALL_IRQ_MASK;
- stm32f7_i2c_disable_irq(i2c_dev, mask);
+ if (!i2c_dev->slave_running) {
+ u32 mask;
+ /* Disable interrupts */
+ if (stm32f7_i2c_is_slave_registered(i2c_dev))
+ mask = STM32F7_I2C_XFER_IRQ_MASK;
+ else
+ mask = STM32F7_I2C_ALL_IRQ_MASK;
+ stm32f7_i2c_disable_irq(i2c_dev, mask);
+ }
/* Disable dma */
if (i2c_dev->use_dma) {
Copyright © 1996 – 2023 Jason A. Donenfeld. All Rights Reverse Engineered.