1 files changed, 121 insertions, 122 deletions

diff --git a/drivers/iio/accel/bmc150-accel.c b/drivers/iio/accel/bmc150-accel.c
index cc5a35750b50..0104cdef8709 100644
--- a/drivers/iio/accel/bmc150-accel.c
+++ b/drivers/iio/accel/bmc150-accel.c
@@ -151,6 +151,7 @@ struct bmc150_scale_info {
 };
 
 struct bmc150_accel_chip_info {
+	const char *name;
 	u8 chip_id;
 	const struct iio_chan_spec *channels;
 	int num_channels;
@@ -241,7 +242,6 @@ static const struct {
 				       {500000, BMC150_ACCEL_SLEEP_500_MS},
 				       {1000000, BMC150_ACCEL_SLEEP_1_SEC} };
 
-
 static int bmc150_accel_set_mode(struct bmc150_accel_data *data,
 				 enum bmc150_power_modes mode,
 				 int dur_us)
@@ -259,8 +259,9 @@ static int bmc150_accel_set_mode(struct bmc150_accel_data *data,
 				dur_val =
 				bmc150_accel_sleep_value_table[i].reg_value;
 		}
-	} else
+	} else {
 		dur_val = 0;
+	}
 
 	if (dur_val < 0)
 		return -EINVAL;
@@ -288,7 +289,7 @@ static int bmc150_accel_set_bw(struct bmc150_accel_data *data, int val,
 
 	for (i = 0; i < ARRAY_SIZE(bmc150_accel_samp_freq_table); ++i) {
 		if (bmc150_accel_samp_freq_table[i].val == val &&
-				bmc150_accel_samp_freq_table[i].val2 == val2) {
+		    bmc150_accel_samp_freq_table[i].val2 == val2) {
 			ret = i2c_smbus_write_byte_data(
 				data->client,
 				BMC150_ACCEL_REG_PMU_BW,
@@ -345,65 +346,6 @@ static int bmc150_accel_any_motion_setup(struct bmc150_accel_trigger *t,
 	return 0;
 }
 
-static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
-{
-	int ret;
-
-	ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID);
-	if (ret < 0) {
-		dev_err(&data->client->dev,
-			"Error: Reading chip id\n");
-		return ret;
-	}
-
-	dev_dbg(&data->client->dev, "Chip Id %x\n", ret);
-	if (ret != data->chip_info->chip_id) {
-		dev_err(&data->client->dev, "Invalid chip %x\n", ret);
-		return -ENODEV;
-	}
-
-	ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
-	if (ret < 0)
-		return ret;
-
-	/* Set Bandwidth */
-	ret = bmc150_accel_set_bw(data, BMC150_ACCEL_DEF_BW, 0);
-	if (ret < 0)
-		return ret;
-
-	/* Set Default Range */
-	ret = i2c_smbus_write_byte_data(data->client,
-					BMC150_ACCEL_REG_PMU_RANGE,
-					BMC150_ACCEL_DEF_RANGE_4G);
-	if (ret < 0) {
-		dev_err(&data->client->dev,
-					"Error writing reg_pmu_range\n");
-		return ret;
-	}
-
-	data->range = BMC150_ACCEL_DEF_RANGE_4G;
-
-	/* Set default slope duration and thresholds */
-	data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD;
-	data->slope_dur = BMC150_ACCEL_DEF_SLOPE_DURATION;
-	ret = bmc150_accel_update_slope(data);
-	if (ret < 0)
-		return ret;
-
-	/* Set default as latched interrupts */
-	ret = i2c_smbus_write_byte_data(data->client,
-					BMC150_ACCEL_REG_INT_RST_LATCH,
-					BMC150_ACCEL_INT_MODE_LATCH_INT |
-					BMC150_ACCEL_INT_MODE_LATCH_RESET);
-	if (ret < 0) {
-		dev_err(&data->client->dev,
-			"Error writing reg_int_rst_latch\n");
-		return ret;
-	}
-
-	return 0;
-}
-
 static int bmc150_accel_get_bw(struct bmc150_accel_data *data, int *val,
 			       int *val2)
 {
@@ -437,12 +379,13 @@ static int bmc150_accel_set_power_state(struct bmc150_accel_data *data, bool on)
 {
 	int ret;
 
-	if (on)
+	if (on) {
 		ret = pm_runtime_get_sync(&data->client->dev);
-	else {
+	} else {
 		pm_runtime_mark_last_busy(&data->client->dev);
 		ret = pm_runtime_put_autosuspend(&data->client->dev);
 	}
+
 	if (ret < 0) {
 		dev_err(&data->client->dev,
 			"Failed: bmc150_accel_set_power_state for %d\n", on);
@@ -514,13 +457,13 @@ static int bmc150_accel_set_interrupt(struct bmc150_accel_data *data, int i,
 	}
 
 	/*
-	 * We will expect the enable and disable to do operation in
-	 * in reverse order. This will happen here anyway as our
-	 * resume operation uses sync mode runtime pm calls, the
-	 * suspend operation will be delayed by autosuspend delay
-	 * So the disable operation will still happen in reverse of
-	 * enable operation. When runtime pm is disabled the mode
-	 * is always on so sequence doesn't matter
+	 * We will expect the enable and disable to do operation in reverse
+	 * order. This will happen here anyway, as our resume operation uses
+	 * sync mode runtime pm calls. The suspend operation will be delayed
+	 * by autosuspend delay.
+	 * So the disable operation will still happen in reverse order of
+	 * enable operation. When runtime pm is disabled the mode is always on,
+	 * so sequence doesn't matter.
 	 */
 	ret = bmc150_accel_set_power_state(data, state);
 	if (ret < 0)
@@ -574,7 +517,6 @@ out_fix_power_state:
 	return ret;
 }
 
-
 static int bmc150_accel_set_scale(struct bmc150_accel_data *data, int val)
 {
 	int ret, i;
@@ -674,8 +616,9 @@ static int bmc150_accel_read_raw(struct iio_dev *indio_dev,
 		if (chan->type == IIO_TEMP) {
 			*val = BMC150_ACCEL_TEMP_CENTER_VAL;
 			return IIO_VAL_INT;
-		} else
+		} else {
 			return -EINVAL;
+		}
 	case IIO_CHAN_INFO_SCALE:
 		*val = 0;
 		switch (chan->type) {
@@ -776,7 +719,7 @@ static int bmc150_accel_write_event(struct iio_dev *indio_dev,
 
 	switch (info) {
 	case IIO_EV_INFO_VALUE:
-		data->slope_thres = val & 0xFF;
+		data->slope_thres = val & BMC150_ACCEL_SLOPE_THRES_MASK;
 		break;
 	case IIO_EV_INFO_PERIOD:
 		data->slope_dur = val & BMC150_ACCEL_SLOPE_DUR_MASK;
@@ -793,7 +736,6 @@ static int bmc150_accel_read_event_config(struct iio_dev *indio_dev,
 					  enum iio_event_type type,
 					  enum iio_event_direction dir)
 {
-
 	struct bmc150_accel_data *data = iio_priv(indio_dev);
 
 	return data->ev_enable_state;
@@ -827,7 +769,7 @@ static int bmc150_accel_write_event_config(struct iio_dev *indio_dev,
 }
 
 static int bmc150_accel_validate_trigger(struct iio_dev *indio_dev,
-				   struct iio_trigger *trig)
+					 struct iio_trigger *trig)
 {
 	struct bmc150_accel_data *data = iio_priv(indio_dev);
 	int i;
@@ -963,6 +905,7 @@ static int __bmc150_accel_fifo_flush(struct iio_dev *indio_dev,
 	u16 buffer[BMC150_ACCEL_FIFO_LENGTH * 3];
 	int64_t tstamp;
 	uint64_t sample_period;
+
 	ret = i2c_smbus_read_byte_data(data->client,
 				       BMC150_ACCEL_REG_FIFO_STATUS);
 	if (ret < 0) {
@@ -1120,6 +1063,7 @@ enum {
 
 static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
 	[bmc150] = {
+		.name = "BMC150A",
 		.chip_id = 0xFA,
 		.channels = bmc150_accel_channels,
 		.num_channels = ARRAY_SIZE(bmc150_accel_channels),
@@ -1129,6 +1073,7 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
 				 {76590, BMC150_ACCEL_DEF_RANGE_16G} },
 	},
 	[bmi055] = {
+		.name = "BMI055A",
 		.chip_id = 0xFA,
 		.channels = bmc150_accel_channels,
 		.num_channels = ARRAY_SIZE(bmc150_accel_channels),
@@ -1138,6 +1083,7 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
 				 {76590, BMC150_ACCEL_DEF_RANGE_16G} },
 	},
 	[bma255] = {
+		.name = "BMA0255",
 		.chip_id = 0xFA,
 		.channels = bmc150_accel_channels,
 		.num_channels = ARRAY_SIZE(bmc150_accel_channels),
@@ -1147,6 +1093,7 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
 				 {76590, BMC150_ACCEL_DEF_RANGE_16G} },
 	},
 	[bma250e] = {
+		.name = "BMA250E",
 		.chip_id = 0xF9,
 		.channels = bma250e_accel_channels,
 		.num_channels = ARRAY_SIZE(bma250e_accel_channels),
@@ -1156,6 +1103,7 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
 				 {306457, BMC150_ACCEL_DEF_RANGE_16G} },
 	},
 	[bma222e] = {
+		.name = "BMA222E",
 		.chip_id = 0xF8,
 		.channels = bma222e_accel_channels,
 		.num_channels = ARRAY_SIZE(bma222e_accel_channels),
@@ -1165,6 +1113,7 @@ static const struct bmc150_accel_chip_info bmc150_accel_chip_info_tbl[] = {
 				 {1225831, BMC150_ACCEL_DEF_RANGE_16G} },
 	},
 	[bma280] = {
+		.name = "BMA0280",
 		.chip_id = 0xFB,
 		.channels = bma280_accel_channels,
 		.num_channels = ARRAY_SIZE(bma280_accel_channels),
@@ -1255,7 +1204,7 @@ static int bmc150_accel_trig_try_reen(struct iio_trigger *trig)
 }
 
 static int bmc150_accel_trigger_set_state(struct iio_trigger *trig,
-						   bool state)
+					  bool state)
 {
 	struct bmc150_accel_trigger *t = iio_trigger_get_drvdata(trig);
 	struct bmc150_accel_data *data = t->data;
@@ -1314,26 +1263,32 @@ static int bmc150_accel_handle_roc_event(struct iio_dev *indio_dev)
 		dir = IIO_EV_DIR_RISING;
 
 	if (ret & BMC150_ACCEL_ANY_MOTION_BIT_X)
-		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
-							0,
-							IIO_MOD_X,
-							IIO_EV_TYPE_ROC,
-							dir),
-							data->timestamp);
+		iio_push_event(indio_dev,
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_X,
+						  IIO_EV_TYPE_ROC,
+						  dir),
+			       data->timestamp);
+
 	if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Y)
-		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
-							0,
-							IIO_MOD_Y,
-							IIO_EV_TYPE_ROC,
-							dir),
-							data->timestamp);
+		iio_push_event(indio_dev,
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_Y,
+						  IIO_EV_TYPE_ROC,
+						  dir),
+			       data->timestamp);
+
 	if (ret & BMC150_ACCEL_ANY_MOTION_BIT_Z)
-		iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL,
-							0,
-							IIO_MOD_Z,
-							IIO_EV_TYPE_ROC,
-							dir),
-							data->timestamp);
+		iio_push_event(indio_dev,
+			       IIO_MOD_EVENT_CODE(IIO_ACCEL,
+						  0,
+						  IIO_MOD_Z,
+						  IIO_EV_TYPE_ROC,
+						  dir),
+			       data->timestamp);
+
 	return ret;
 }
 
@@ -1365,7 +1320,9 @@ static irqreturn_t bmc150_accel_irq_thread_handler(int irq, void *private)
 					BMC150_ACCEL_INT_MODE_LATCH_INT |
 					BMC150_ACCEL_INT_MODE_LATCH_RESET);
 		if (ret)
-			dev_err(&data->client->dev, "Error writing reg_int_rst_latch\n");
+			dev_err(&data->client->dev,
+				"Error writing reg_int_rst_latch\n");
+
 		ret = IRQ_HANDLED;
 	} else {
 		ret = IRQ_NONE;
@@ -1403,22 +1360,8 @@ static irqreturn_t bmc150_accel_irq_handler(int irq, void *private)
 	return IRQ_NONE;
 }
 
-static const char *bmc150_accel_match_acpi_device(struct device *dev, int *data)
-{
-	const struct acpi_device_id *id;
-
-	id = acpi_match_device(dev->driver->acpi_match_table, dev);
-
-	if (!id)
-		return NULL;
-
-	*data = (int) id->driver_data;
-
-	return dev_name(dev);
-}
-
 static int bmc150_accel_gpio_probe(struct i2c_client *client,
-					struct bmc150_accel_data *data)
+				   struct bmc150_accel_data *data)
 {
 	struct device *dev;
 	struct gpio_desc *gpio;
@@ -1611,6 +1554,70 @@ static const struct iio_buffer_setup_ops bmc150_accel_buffer_ops = {
 	.postdisable = bmc150_accel_buffer_postdisable,
 };
 
+static int bmc150_accel_chip_init(struct bmc150_accel_data *data)
+{
+	int ret, i;
+
+	ret = i2c_smbus_read_byte_data(data->client, BMC150_ACCEL_REG_CHIP_ID);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error: Reading chip id\n");
+		return ret;
+	}
+
+	dev_dbg(&data->client->dev, "Chip Id %x\n", ret);
+	for (i = 0; i < ARRAY_SIZE(bmc150_accel_chip_info_tbl); i++) {
+		if (bmc150_accel_chip_info_tbl[i].chip_id == ret) {
+			data->chip_info = &bmc150_accel_chip_info_tbl[i];
+			break;
+		}
+	}
+
+	if (!data->chip_info) {
+		dev_err(&data->client->dev, "Unsupported chip %x\n", ret);
+		return -ENODEV;
+	}
+
+	ret = bmc150_accel_set_mode(data, BMC150_ACCEL_SLEEP_MODE_NORMAL, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Set Bandwidth */
+	ret = bmc150_accel_set_bw(data, BMC150_ACCEL_DEF_BW, 0);
+	if (ret < 0)
+		return ret;
+
+	/* Set Default Range */
+	ret = i2c_smbus_write_byte_data(data->client,
+					BMC150_ACCEL_REG_PMU_RANGE,
+					BMC150_ACCEL_DEF_RANGE_4G);
+	if (ret < 0) {
+		dev_err(&data->client->dev, "Error writing reg_pmu_range\n");
+		return ret;
+	}
+
+	data->range = BMC150_ACCEL_DEF_RANGE_4G;
+
+	/* Set default slope duration and thresholds */
+	data->slope_thres = BMC150_ACCEL_DEF_SLOPE_THRESHOLD;
+	data->slope_dur = BMC150_ACCEL_DEF_SLOPE_DURATION;
+	ret = bmc150_accel_update_slope(data);
+	if (ret < 0)
+		return ret;
+
+	/* Set default as latched interrupts */
+	ret = i2c_smbus_write_byte_data(data->client,
+					BMC150_ACCEL_REG_INT_RST_LATCH,
+					BMC150_ACCEL_INT_MODE_LATCH_INT |
+					BMC150_ACCEL_INT_MODE_LATCH_RESET);
+	if (ret < 0) {
+		dev_err(&data->client->dev,
+			"Error writing reg_int_rst_latch\n");
+		return ret;
+	}
+
+	return 0;
+}
+
 static int bmc150_accel_probe(struct i2c_client *client,
 			      const struct i2c_device_id *id)
 {
@@ -1618,7 +1625,6 @@ static int bmc150_accel_probe(struct i2c_client *client,
 	struct iio_dev *indio_dev;
 	int ret;
 	const char *name = NULL;
-	int chip_id = 0;
 
 	indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data));
 	if (!indio_dev)
@@ -1628,15 +1634,8 @@ static int bmc150_accel_probe(struct i2c_client *client,
 	i2c_set_clientdata(client, indio_dev);
 	data->client = client;
 
-	if (id) {
+	if (id)
 		name = id->name;
-		chip_id = id->driver_data;
-	}
-
-	if (ACPI_HANDLE(&client->dev))
-		name = bmc150_accel_match_acpi_device(&client->dev, &chip_id);
-
-	data->chip_info = &bmc150_accel_chip_info_tbl[chip_id];
 
 	ret = bmc150_accel_chip_init(data);
 	if (ret < 0)
@@ -1647,7 +1646,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
 	indio_dev->dev.parent = &client->dev;
 	indio_dev->channels = data->chip_info->channels;
 	indio_dev->num_channels = data->chip_info->num_channels;
-	indio_dev->name = name;
+	indio_dev->name = name ? name : data->chip_info->name;
 	indio_dev->modes = INDIO_DIRECT_MODE;
 	indio_dev->info = &bmc150_accel_info;
 
@@ -1663,7 +1662,7 @@ static int bmc150_accel_probe(struct i2c_client *client,
 	if (client->irq < 0)
 		client->irq = bmc150_accel_gpio_probe(client, data);
 
-	if (client->irq >= 0) {
+	if (client->irq > 0) {
 		ret = devm_request_threaded_irq(
 						&client->dev, client->irq,
 						bmc150_accel_irq_handler,