diff options
Diffstat (limited to 'drivers/iio/adc/Kconfig')
| -rw-r--r-- | drivers/iio/adc/Kconfig | 263 |
1 files changed, 229 insertions, 34 deletions
diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 82e33082958c..791612ca6012 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -39,6 +39,18 @@ config AD7124 To compile this driver as a module, choose M here: the module will be called ad7124. +config AD7192 + tristate "Analog Devices AD7190 AD7192 AD7193 AD7195 ADC driver" + depends on SPI + select AD_SIGMA_DELTA + help + Say yes here to build support for Analog Devices AD7190, + AD7192, AD7193 or AD7195 SPI analog to digital converters (ADC). + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called ad7192. + config AD7266 tristate "Analog Devices AD7265/AD7266 ADC driver" depends on SPI_MASTER @@ -52,6 +64,17 @@ config AD7266 To compile this driver as a module, choose M here: the module will be called ad7266. +config AD7280 + tristate "Analog Devices AD7280A Lithium Ion Battery Monitoring System" + depends on SPI + select CRC8 + help + Say yes here to build support for Analog Devices AD7280A + Lithium Ion Battery Monitoring System. + + To compile this driver as a module, choose M here: the + module will be called ad7280a + config AD7291 tristate "Analog Devices AD7291 ADC driver" depends on I2C @@ -85,7 +108,7 @@ config AD7298 module will be called ad7298. config AD7476 - tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD an TI" + tristate "Analog Devices AD7476 1-channel ADCs driver and other similar devices from AD and TI" depends on SPI select IIO_BUFFER select IIO_TRIGGERED_BUFFER @@ -234,6 +257,43 @@ config AD799X To compile this driver as a module, choose M here: the module will be called ad799x. +config AD9467 + tristate "Analog Devices AD9467 High Speed ADC driver" + depends on SPI + depends on ADI_AXI_ADC + help + Say yes here to build support for Analog Devices: + * AD9467 16-Bit, 200 MSPS/250 MSPS Analog-to-Digital Converter + + The driver requires the assistance of the AXI ADC IP core to operate, + since SPI is used for configuration only, while data has to be + streamed into memory via DMA. + + To compile this driver as a module, choose M here: the module will be + called ad9467. + +config ADI_AXI_ADC + tristate "Analog Devices Generic AXI ADC IP core driver" + select IIO_BUFFER + select IIO_BUFFER_HW_CONSUMER + select IIO_BUFFER_DMAENGINE + depends on HAS_IOMEM + depends on OF + help + Say yes here to build support for Analog Devices Generic + AXI ADC IP core. The IP core is used for interfacing with + analog-to-digital (ADC) converters that require either a high-speed + serial interface (JESD204B/C) or a source synchronous parallel + interface (LVDS/CMOS). + Typically (for such devices) SPI will be used for configuration only, + while this IP core handles the streaming of data into memory via DMA. + + Link: https://wiki.analog.com/resources/fpga/docs/axi_adc_ip + If unsure, say N (but it's safe to say "Y"). + + To compile this driver as a module, choose M here: the + module will be called adi-axi-adc. + config ASPEED_ADC tristate "Aspeed ADC" depends on ARCH_ASPEED || COMPILE_TEST @@ -247,8 +307,8 @@ config ASPEED_ADC config AT91_ADC tristate "Atmel AT91 ADC" - depends on ARCH_AT91 - depends on INPUT && SYSFS + depends on ARCH_AT91 || COMPILE_TEST + depends on INPUT && SYSFS && OF select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -293,7 +353,7 @@ config AXP288_ADC config BCM_IPROC_ADC tristate "Broadcom IPROC ADC driver" - depends on ARCH_BCM_IPROC || COMPILE_TEST + depends on (ARCH_BCM_IPROC && OF) || COMPILE_TEST depends on MFD_SYSCON default ARCH_BCM_CYGNUS help @@ -305,7 +365,7 @@ config BCM_IPROC_ADC config BERLIN2_ADC tristate "Marvell Berlin2 ADC driver" - depends on ARCH_BERLIN + depends on ARCH_BERLIN || COMPILE_TEST help Marvell Berlin2 ADC driver. This ADC has 8 channels, with one used for temperature measurement. @@ -357,7 +417,6 @@ config DLN2_ADC config ENVELOPE_DETECTOR tristate "Envelope detector using a DAC and a comparator" - depends on OF help Say yes here to build support for an envelope detector using a DAC and a comparator. @@ -381,9 +440,9 @@ config EXYNOS_ADC depends on ARCH_EXYNOS || ARCH_S3C24XX || ARCH_S3C64XX || ARCH_S5PV210 || (OF && COMPILE_TEST) depends on HAS_IOMEM help - Core support for the ADC block found in the Samsung EXYNOS series - of SoCs for drivers such as the touchscreen and hwmon to use to share - this resource. + Driver for the ADC block found in the Samsung S3C (S3C2410, S3C2416, + S3C2440, S3C2443, S3C6410), S5Pv210 and Exynos SoCs. + Choose Y here only if you build for such Samsung SoC. To compile this driver as a module, choose M here: the module will be called exynos_adc. @@ -453,6 +512,7 @@ config INA2XX_ADC config INGENIC_ADC tristate "Ingenic JZ47xx SoCs ADC driver" depends on MIPS || COMPILE_TEST + select IIO_BUFFER help Say yes here to build support for the Ingenic JZ47xx SoCs ADC unit. @@ -480,6 +540,16 @@ config IMX7D_ADC This driver can also be built as a module. If so, the module will be called imx7d_adc. +config IMX8QXP_ADC + tristate "NXP IMX8QXP ADC driver" + depends on ARCH_MXC || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to build support for IMX8QXP ADC. + + This driver can also be built as a module. If so, the module will be + called imx8qxp-adc. + config LP8788_ADC tristate "LP8788 ADC driver" depends on MFD_LP8788 @@ -492,7 +562,7 @@ config LP8788_ADC config LPC18XX_ADC tristate "NXP LPC18xx ADC driver" depends on ARCH_LPC18XX || COMPILE_TEST - depends on OF && HAS_IOMEM + depends on HAS_IOMEM help Say yes here to build support for NXP LPC18XX ADC. @@ -583,6 +653,30 @@ config MAX1118 To compile this driver as a module, choose M here: the module will be called max1118. +config MAX11205 + tristate "Maxim max11205 ADC driver" + depends on SPI + select AD_SIGMA_DELTA + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + + help + Say yes here to build support for Maxim max11205 16-bit, single-channel + ultra-low power delta-sigma ADC. + + To compile this driver as a module, choose M here: the module will be + called max11205. + +config MAX1241 + tristate "Maxim max1241 ADC driver" + depends on SPI_MASTER + help + Say yes here to build support for Maxim max1241 12-bit, single-channel + ADC. + + To compile this driver as a module, choose M here: the module will be + called max1241. + config MAX1363 tristate "Maxim max1363 ADC driver" depends on I2C @@ -638,6 +732,8 @@ config MCP3422 config MCP3911 tristate "Microchip Technology MCP3911 driver" depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for Microchip Technology's MCP3911 analog to digital converter. @@ -645,6 +741,17 @@ config MCP3911 This driver can also be built as a module. If so, the module will be called mcp3911. +config MEDIATEK_MT6360_ADC + tristate "Mediatek MT6360 ADC driver" + depends on MFD_MT6360 + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to enable MT6360 ADC support. + Integrated for System Monitoring includes + is used in smartphones and tablets and supports a 11 channel + general purpose ADC. + config MEDIATEK_MT6577_AUXADC tristate "MediaTek AUXADC driver" depends on ARCH_MEDIATEK || COMPILE_TEST @@ -680,6 +787,16 @@ config MESON_SARADC To compile this driver as a module, choose M here: the module will be called meson_saradc. +config MP2629_ADC + tristate "Monolithic MP2629 ADC driver" + depends on MFD_MP2629 + help + Say yes to have support for battery charger IC MP2629 ADC device + accessed over I2C. + + This driver provides ADC conversion of system, input power supply + and battery voltage & current information. + config NAU7802 tristate "Nuvoton NAU7802 ADC driver" depends on I2C @@ -721,6 +838,18 @@ config QCOM_PM8XXX_XOADC To compile this driver as a module, choose M here: the module will be called qcom-pm8xxx-xoadc. +config QCOM_SPMI_RRADC + tristate "Qualcomm SPMI RRADC" + depends on MFD_SPMI_PMIC + help + This is for the PMIC Round Robin ADC driver. + + This driver exposes the battery ID resistor, battery thermal, PMIC die + temperature, charger USB in and DC in voltage and current. + + To compile this driver as a module, choose M here: the module will + be called qcom-qpmi-rradc. + config QCOM_SPMI_IADC tristate "Qualcomm SPMI PMIC current ADC" depends on SPMI @@ -783,10 +912,22 @@ config RCAR_GYRO_ADC To compile this driver as a module, choose M here: the module will be called rcar-gyroadc. +config RN5T618_ADC + tristate "ADC for the RN5T618/RC5T619 family of chips" + depends on MFD_RN5T618 + help + Say yes here to build support for the integrated ADC inside the + RN5T618/619 series PMICs: + + This driver can also be built as a module. If so, the module + will be called rn5t618-adc. + config ROCKCHIP_SARADC tristate "Rockchip SARADC driver" - depends on ARCH_ROCKCHIP || (ARM && COMPILE_TEST) + depends on ARCH_ROCKCHIP || COMPILE_TEST depends on RESET_CONTROLLER + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER help Say yes here to build support for the SARADC found in SoCs from Rockchip. @@ -794,6 +935,31 @@ config ROCKCHIP_SARADC To compile this driver as a module, choose M here: the module will be called rockchip_saradc. +config RICHTEK_RTQ6056 + tristate "Richtek RTQ6056 Current and Power Monitor ADC" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to enable RQT6056 ADC support. + RTQ6056 is a high accuracy current-sense monitor with I2C and SMBus + compatible interface, and the device provides full information for + system by reading out the load current and power. + + This driver can also be built as a module. If so, the module will be + called rtq6056. + +config RZG2L_ADC + tristate "Renesas RZ/G2L ADC driver" + depends on ARCH_RZG2L || COMPILE_TEST + help + Say yes here to build support for the ADC found in Renesas + RZ/G2L family. + + To compile this driver as a module, choose M here: the + module will be called rzg2l_adc. + config SC27XX_ADC tristate "Spreadtrum SC27xx series PMICs ADC" depends on MFD_SC27XX_PMIC || COMPILE_TEST @@ -817,7 +983,6 @@ config SPEAR_ADC config SD_ADC_MODULATOR tristate "Generic sigma delta modulator" - depends on OF select IIO_BUFFER select IIO_TRIGGERED_BUFFER help @@ -832,6 +997,7 @@ config STM32_ADC_CORE depends on ARCH_STM32 || COMPILE_TEST depends on OF depends on REGULATOR + depends on HAS_IOMEM select IIO_BUFFER select MFD_STM32_TIMERS select IIO_STM32_TIMER_TRIGGER @@ -887,22 +1053,6 @@ config STMPE_ADC Say yes here to build support for ST Microelectronics STMPE built-in ADC block (stmpe811). -config STX104 - tristate "Apex Embedded Systems STX104 driver" - depends on PC104 && X86 - select ISA_BUS_API - select GPIOLIB - help - Say yes here to build support for the Apex Embedded Systems STX104 - integrated analog PC/104 card. - - This driver supports the 16 channels of single-ended (8 channels of - differential) analog inputs, 2 channels of analog output, 4 digital - inputs, and 4 digital outputs provided by the STX104. - - The base port addresses for the devices may be configured via the base - array module parameter. - config SUN4I_GPADC tristate "Support for the Allwinner SoCs GPADC" depends on IIO @@ -1032,7 +1182,7 @@ config TI_ADS7950 config TI_ADS8344 tristate "Texas Instruments ADS8344" - depends on SPI && OF + depends on SPI help If you say yes here you get support for Texas Instruments ADS8344 ADC chips @@ -1042,7 +1192,7 @@ config TI_ADS8344 config TI_ADS8688 tristate "Texas Instruments ADS8688" - depends on SPI && OF + depends on SPI help If you say yes here you get support for Texas Instruments ADS8684 and and ADS8688 ADC chips @@ -1052,7 +1202,7 @@ config TI_ADS8688 config TI_ADS124S08 tristate "Texas Instruments ADS124S08" - depends on SPI && OF + depends on SPI help If you say yes here you get support for Texas Instruments ADS124S08 and ADS124S06 ADC chips @@ -1060,6 +1210,18 @@ config TI_ADS124S08 This driver can also be built as a module. If so, the module will be called ti-ads124s08. +config TI_ADS131E08 + tristate "Texas Instruments ADS131E08" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to get support for Texas Instruments ADS131E04, ADS131E06 + and ADS131E08 chips. + + This driver can also be built as a module. If so, the module will be + called ti-ads131e08. + config TI_AM335X_ADC tristate "TI's AM335X ADC driver" depends on MFD_TI_AM335X_TSCADC && HAS_DMA @@ -1084,6 +1246,18 @@ config TI_TLC4541 This driver can also be built as a module. If so, the module will be called ti-tlc4541. +config TI_TSC2046 + tristate "Texas Instruments TSC2046 ADC driver" + depends on SPI + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say yes here to build support for ADC functionality of Texas + Instruments TSC2046 touch screen controller. + + This driver can also be built as a module. If so, the module will be + called ti-tsc2046. + config TWL4030_MADC tristate "TWL4030 MADC (Monitoring A/D Converter)" depends on TWL4030_CORE @@ -1110,7 +1284,6 @@ config TWL6030_GPADC config VF610_ADC tristate "Freescale vf610 ADC driver" - depends on OF depends on HAS_IOMEM select IIO_BUFFER select IIO_TRIGGERED_BUFFER @@ -1137,10 +1310,32 @@ config XILINX_XADC select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say yes here to have support for the Xilinx XADC. The driver does support - both the ZYNQ interface to the XADC as well as the AXI-XADC interface. + Say yes here to have support for the Xilinx 7 Series XADC or + UltraScale/UltraScale+ System Management Wizard. + + For the 7 Series the driver does support both the ZYNQ interface + to the XADC as well as the AXI-XADC interface. + + The driver also support the Xilinx System Management Wizard IP core + that can be used to access the System Monitor ADC on the Xilinx + UltraScale and UltraScale+ FPGAs. The driver can also be build as a module. If so, the module will be called xilinx-xadc. +config XILINX_AMS + tristate "Xilinx AMS driver" + depends on ARCH_ZYNQMP || COMPILE_TEST + depends on HAS_IOMEM + help + Say yes here to have support for the Xilinx AMS for Ultrascale/Ultrascale+ + System Monitor. With this you can measure and monitor the Voltages and + Temperature values on the SOC. + + The driver supports Voltage and Temperature monitoring on Xilinx Ultrascale + devices. + + The driver can also be built as a module. If so, the module will be called + xilinx-ams. + endmenu |