1 files changed, 141 insertions, 0 deletions
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
new file mode 100644
index 000000000000..69deafe1c10d
--- /dev/null
+++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx.h
@@ -0,0 +1,141 @@
+/*
+ * STMicroelectronics st_lsm6dsx sensor driver
+ *
+ * Copyright 2016 STMicroelectronics Inc.
+ *
+ * Lorenzo Bianconi <lorenzo.bianconi@st.com>
+ * Denis Ciocca <denis.ciocca@st.com>
+ *
+ * Licensed under the GPL-2.
+ */
+
+#ifndef ST_LSM6DSX_H
+#define ST_LSM6DSX_H
+
+#include <linux/device.h>
+
+#define ST_LSM6DS3_DEV_NAME	"lsm6ds3"
+#define ST_LSM6DSM_DEV_NAME	"lsm6dsm"
+
+enum st_lsm6dsx_hw_id {
+	ST_LSM6DS3_ID,
+	ST_LSM6DSM_ID,
+};
+
+#define ST_LSM6DSX_CHAN_SIZE		2
+#define ST_LSM6DSX_SAMPLE_SIZE		6
+#define ST_LSM6DSX_SAMPLE_DEPTH		(ST_LSM6DSX_SAMPLE_SIZE / \
+					 ST_LSM6DSX_CHAN_SIZE)
+
+#if defined(CONFIG_SPI_MASTER)
+#define ST_LSM6DSX_RX_MAX_LENGTH	256
+#define ST_LSM6DSX_TX_MAX_LENGTH	8
+
+struct st_lsm6dsx_transfer_buffer {
+	u8 rx_buf[ST_LSM6DSX_RX_MAX_LENGTH];
+	u8 tx_buf[ST_LSM6DSX_TX_MAX_LENGTH] ____cacheline_aligned;
+};
+#endif /* CONFIG_SPI_MASTER */
+
+struct st_lsm6dsx_transfer_function {
+	int (*read)(struct device *dev, u8 addr, int len, u8 *data);
+	int (*write)(struct device *dev, u8 addr, int len, u8 *data);
+};
+
+struct st_lsm6dsx_reg {
+	u8 addr;
+	u8 mask;
+};
+
+struct st_lsm6dsx_settings {
+	u8 wai;
+	u16 max_fifo_size;
+	enum st_lsm6dsx_hw_id id;
+};
+
+enum st_lsm6dsx_sensor_id {
+	ST_LSM6DSX_ID_ACC,
+	ST_LSM6DSX_ID_GYRO,
+	ST_LSM6DSX_ID_MAX,
+};
+
+enum st_lsm6dsx_fifo_mode {
+	ST_LSM6DSX_FIFO_BYPASS = 0x0,
+	ST_LSM6DSX_FIFO_CONT = 0x6,
+};
+
+/**
+ * struct st_lsm6dsx_sensor - ST IMU sensor instance
+ * @id: Sensor identifier.
+ * @hw: Pointer to instance of struct st_lsm6dsx_hw.
+ * @gain: Configured sensor sensitivity.
+ * @odr: Output data rate of the sensor [Hz].
+ * @watermark: Sensor watermark level.
+ * @sip: Number of samples in a given pattern.
+ * @decimator: FIFO decimation factor.
+ * @decimator_mask: Sensor mask for decimation register.
+ * @delta_ts: Delta time between two consecutive interrupts.
+ * @ts: Latest timestamp from the interrupt handler.
+ */
+struct st_lsm6dsx_sensor {
+	enum st_lsm6dsx_sensor_id id;
+	struct st_lsm6dsx_hw *hw;
+
+	u32 gain;
+	u16 odr;
+
+	u16 watermark;
+	u8 sip;
+	u8 decimator;
+	u8 decimator_mask;
+
+	s64 delta_ts;
+	s64 ts;
+};
+
+/**
+ * struct st_lsm6dsx_hw - ST IMU MEMS hw instance
+ * @dev: Pointer to instance of struct device (I2C or SPI).
+ * @irq: Device interrupt line (I2C or SPI).
+ * @lock: Mutex to protect read and write operations.
+ * @fifo_lock: Mutex to prevent concurrent access to the hw FIFO.
+ * @fifo_mode: FIFO operating mode supported by the device.
+ * @enable_mask: Enabled sensor bitmask.
+ * @sip: Total number of samples (acc/gyro) in a given pattern.
+ * @iio_devs: Pointers to acc/gyro iio_dev instances.
+ * @settings: Pointer to the specific sensor settings in use.
+ * @tf: Transfer function structure used by I/O operations.
+ * @tb: Transfer buffers used by SPI I/O operations.
+ */
+struct st_lsm6dsx_hw {
+	struct device *dev;
+	int irq;
+
+	struct mutex lock;
+	struct mutex fifo_lock;
+
+	enum st_lsm6dsx_fifo_mode fifo_mode;
+	u8 enable_mask;
+	u8 sip;
+
+	struct iio_dev *iio_devs[ST_LSM6DSX_ID_MAX];
+
+	const struct st_lsm6dsx_settings *settings;
+
+	const struct st_lsm6dsx_transfer_function *tf;
+#if defined(CONFIG_SPI_MASTER)
+	struct st_lsm6dsx_transfer_buffer tb;
+#endif /* CONFIG_SPI_MASTER */
+};
+
+int st_lsm6dsx_probe(struct device *dev, int irq, int hw_id,
+		     const struct st_lsm6dsx_transfer_function *tf_ops);
+int st_lsm6dsx_sensor_enable(struct st_lsm6dsx_sensor *sensor);
+int st_lsm6dsx_sensor_disable(struct st_lsm6dsx_sensor *sensor);
+int st_lsm6dsx_fifo_setup(struct st_lsm6dsx_hw *hw);
+int st_lsm6dsx_write_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, u8 mask,
+			       u8 val);
+int st_lsm6dsx_update_watermark(struct st_lsm6dsx_sensor *sensor,
+				u16 watermark);
+
+#endif /* ST_LSM6DSX_H */