diff options
Diffstat (limited to 'drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c')
| -rw-r--r-- | drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c | 777 |
1 files changed, 777 insertions, 0 deletions
diff --git a/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c new file mode 100644 index 000000000000..66fbcd94642d --- /dev/null +++ b/drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_shub.c @@ -0,0 +1,777 @@ +/* + * STMicroelectronics st_lsm6dsx i2c controller driver + * + * i2c controller embedded in lsm6dx series can connect up to four + * slave devices using accelerometer sensor as trigger for i2c + * read/write operations. Current implementation relies on SLV0 channel + * for slave configuration and SLV{1,2,3} to read data and push them into + * the hw FIFO + * + * Copyright (C) 2018 Lorenzo Bianconi <lorenzo.bianconi83@gmail.com> + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ +#include <linux/module.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/bitfield.h> + +#include "st_lsm6dsx.h" + +#define ST_LSM6DSX_MAX_SLV_NUM 3 +#define ST_LSM6DSX_SLV_ADDR(n, base) ((base) + (n) * 3) +#define ST_LSM6DSX_SLV_SUB_ADDR(n, base) ((base) + 1 + (n) * 3) +#define ST_LSM6DSX_SLV_CONFIG(n, base) ((base) + 2 + (n) * 3) + +#define ST_LS6DSX_READ_OP_MASK GENMASK(2, 0) + +static const struct st_lsm6dsx_ext_dev_settings st_lsm6dsx_ext_dev_table[] = { + /* LIS2MDL */ + { + .i2c_addr = { 0x1e }, + .wai = { + .addr = 0x4f, + .val = 0x40, + }, + .id = ST_LSM6DSX_ID_MAGN, + .odr_table = { + .reg = { + .addr = 0x60, + .mask = GENMASK(3, 2), + }, + .odr_avl[0] = { 10, 0x0 }, + .odr_avl[1] = { 20, 0x1 }, + .odr_avl[2] = { 50, 0x2 }, + .odr_avl[3] = { 100, 0x3 }, + }, + .fs_table = { + .fs_avl[0] = { + .gain = 1500, + .val = 0x0, + }, /* 1500 uG/LSB */ + }, + .temp_comp = { + .addr = 0x60, + .mask = BIT(7), + }, + .pwr_table = { + .reg = { + .addr = 0x60, + .mask = GENMASK(1, 0), + }, + .off_val = 0x2, + .on_val = 0x0, + }, + .off_canc = { + .addr = 0x61, + .mask = BIT(1), + }, + .bdu = { + .addr = 0x62, + .mask = BIT(4), + }, + .out = { + .addr = 0x68, + .len = 6, + }, + }, +}; + +static void st_lsm6dsx_shub_wait_complete(struct st_lsm6dsx_hw *hw) +{ + struct st_lsm6dsx_sensor *sensor; + + sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + msleep((2000U / sensor->odr) + 1); +} + +/** + * st_lsm6dsx_shub_read_reg - read i2c controller register + * + * Read st_lsm6dsx i2c controller register + */ +static int st_lsm6dsx_shub_read_reg(struct st_lsm6dsx_hw *hw, u8 addr, + u8 *data, int len) +{ + int err; + + mutex_lock(&hw->page_lock); + + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + err = regmap_bulk_read(hw->regmap, addr, data, len); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +/** + * st_lsm6dsx_shub_write_reg - write i2c controller register + * + * Write st_lsm6dsx i2c controller register + */ +static int st_lsm6dsx_shub_write_reg(struct st_lsm6dsx_hw *hw, u8 addr, + u8 *data, int len) +{ + int err; + + mutex_lock(&hw->page_lock); + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + err = regmap_bulk_write(hw->regmap, addr, data, len); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +static int +st_lsm6dsx_shub_write_reg_with_mask(struct st_lsm6dsx_hw *hw, u8 addr, + u8 mask, u8 val) +{ + int err; + + mutex_lock(&hw->page_lock); + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + err = regmap_update_bits(hw->regmap, addr, mask, val); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +static int st_lsm6dsx_shub_master_enable(struct st_lsm6dsx_sensor *sensor, + bool enable) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + unsigned int data; + int err; + + /* enable acc sensor as trigger */ + err = st_lsm6dsx_sensor_set_enable(sensor, enable); + if (err < 0) + return err; + + mutex_lock(&hw->page_lock); + + hub_settings = &hw->settings->shub_settings; + err = st_lsm6dsx_set_page(hw, true); + if (err < 0) + goto out; + + data = ST_LSM6DSX_SHIFT_VAL(enable, hub_settings->master_en.mask); + err = regmap_update_bits(hw->regmap, hub_settings->master_en.addr, + hub_settings->master_en.mask, data); + + st_lsm6dsx_set_page(hw, false); +out: + mutex_unlock(&hw->page_lock); + + return err; +} + +/** + * st_lsm6dsx_shub_read - read data from slave device register + * + * Read data from slave device register. SLV0 is used for + * one-shot read operation + */ +static int +st_lsm6dsx_shub_read(struct st_lsm6dsx_sensor *sensor, u8 addr, + u8 *data, int len) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + u8 config[3], slv_addr; + int err; + + hub_settings = &hw->settings->shub_settings; + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + + config[0] = (sensor->ext_info.addr << 1) | 1; + config[1] = addr; + config[2] = len & ST_LS6DSX_READ_OP_MASK; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + err = st_lsm6dsx_shub_read_reg(hw, hub_settings->shub_out, data, + len & ST_LS6DSX_READ_OP_MASK); + + st_lsm6dsx_shub_master_enable(sensor, false); + + memset(config, 0, sizeof(config)); + return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); +} + +/** + * st_lsm6dsx_shub_write - write data to slave device register + * + * Write data from slave device register. SLV0 is used for + * one-shot write operation + */ +static int +st_lsm6dsx_shub_write(struct st_lsm6dsx_sensor *sensor, u8 addr, + u8 *data, int len) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_hw *hw = sensor->hw; + u8 config[2], slv_addr; + int err, i; + + hub_settings = &hw->settings->shub_settings; + if (hub_settings->wr_once.addr) { + unsigned int data; + + data = ST_LSM6DSX_SHIFT_VAL(1, hub_settings->wr_once.mask); + err = st_lsm6dsx_shub_write_reg_with_mask(hw, + hub_settings->wr_once.addr, + hub_settings->wr_once.mask, + data); + if (err < 0) + return err; + } + + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + config[0] = sensor->ext_info.addr << 1; + for (i = 0 ; i < len; i++) { + config[1] = addr + i; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_write_reg(hw, hub_settings->dw_slv0_addr, + &data[i], 1); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + st_lsm6dsx_shub_master_enable(sensor, false); + } + + memset(config, 0, sizeof(config)); + return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, sizeof(config)); +} + +static int +st_lsm6dsx_shub_write_with_mask(struct st_lsm6dsx_sensor *sensor, + u8 addr, u8 mask, u8 val) +{ + int err; + u8 data; + + err = st_lsm6dsx_shub_read(sensor, addr, &data, sizeof(data)); + if (err < 0) + return err; + + data = ((data & ~mask) | (val << __ffs(mask) & mask)); + + return st_lsm6dsx_shub_write(sensor, addr, &data, sizeof(data)); +} + +static int +st_lsm6dsx_shub_get_odr_val(struct st_lsm6dsx_sensor *sensor, + u16 odr, u16 *val) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int i; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) + if (settings->odr_table.odr_avl[i].hz == odr) + break; + + if (i == ST_LSM6DSX_ODR_LIST_SIZE) + return -EINVAL; + + *val = settings->odr_table.odr_avl[i].val; + return 0; +} + +static int +st_lsm6dsx_shub_set_odr(struct st_lsm6dsx_sensor *sensor, u16 odr) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + u16 val; + int err; + + err = st_lsm6dsx_shub_get_odr_val(sensor, odr, &val); + if (err < 0) + return err; + + settings = sensor->ext_info.settings; + return st_lsm6dsx_shub_write_with_mask(sensor, + settings->odr_table.reg.addr, + settings->odr_table.reg.mask, + val); +} + +/* use SLV{1,2,3} for FIFO read operations */ +static int +st_lsm6dsx_shub_config_channels(struct st_lsm6dsx_sensor *sensor, + bool enable) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + const struct st_lsm6dsx_ext_dev_settings *settings; + u8 config[9] = {}, enable_mask, slv_addr; + struct st_lsm6dsx_hw *hw = sensor->hw; + struct st_lsm6dsx_sensor *cur_sensor; + int i, j = 0; + + hub_settings = &hw->settings->shub_settings; + if (enable) + enable_mask = hw->enable_mask | BIT(sensor->id); + else + enable_mask = hw->enable_mask & ~BIT(sensor->id); + + for (i = ST_LSM6DSX_ID_EXT0; i <= ST_LSM6DSX_ID_EXT2; i++) { + if (!hw->iio_devs[i]) + continue; + + cur_sensor = iio_priv(hw->iio_devs[i]); + if (!(enable_mask & BIT(cur_sensor->id))) + continue; + + settings = cur_sensor->ext_info.settings; + config[j] = (sensor->ext_info.addr << 1) | 1; + config[j + 1] = settings->out.addr; + config[j + 2] = (settings->out.len & ST_LS6DSX_READ_OP_MASK) | + hub_settings->batch_en; + j += 3; + } + + slv_addr = ST_LSM6DSX_SLV_ADDR(1, hub_settings->slv0_addr); + return st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); +} + +int st_lsm6dsx_shub_set_enable(struct st_lsm6dsx_sensor *sensor, bool enable) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int err; + + err = st_lsm6dsx_shub_config_channels(sensor, enable); + if (err < 0) + return err; + + settings = sensor->ext_info.settings; + if (enable) { + err = st_lsm6dsx_shub_set_odr(sensor, sensor->odr); + if (err < 0) + return err; + } else { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->odr_table.reg.addr, + settings->odr_table.reg.mask, 0); + if (err < 0) + return err; + } + + if (settings->pwr_table.reg.addr) { + u8 val; + + val = enable ? settings->pwr_table.on_val + : settings->pwr_table.off_val; + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->pwr_table.reg.addr, + settings->pwr_table.reg.mask, val); + if (err < 0) + return err; + } + + return st_lsm6dsx_shub_master_enable(sensor, enable); +} + +static int +st_lsm6dsx_shub_read_oneshot(struct st_lsm6dsx_sensor *sensor, + struct iio_chan_spec const *ch, + int *val) +{ + int err, delay, len; + u8 data[4]; + + err = st_lsm6dsx_shub_set_enable(sensor, true); + if (err < 0) + return err; + + delay = 1000000 / sensor->odr; + usleep_range(delay, 2 * delay); + + len = min_t(int, sizeof(data), ch->scan_type.realbits >> 3); + err = st_lsm6dsx_shub_read(sensor, ch->address, data, len); + + st_lsm6dsx_shub_set_enable(sensor, false); + + if (err < 0) + return err; + + switch (len) { + case 2: + *val = (s16)le16_to_cpu(*((__le16 *)data)); + break; + default: + return -EINVAL; + } + + return IIO_VAL_INT; +} + +static int +st_lsm6dsx_shub_read_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *ch, + int *val, int *val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = iio_device_claim_direct_mode(iio_dev); + if (ret) + break; + + ret = st_lsm6dsx_shub_read_oneshot(sensor, ch, val); + iio_device_release_direct_mode(iio_dev); + break; + case IIO_CHAN_INFO_SAMP_FREQ: + *val = sensor->odr; + ret = IIO_VAL_INT; + break; + case IIO_CHAN_INFO_SCALE: + *val = 0; + *val2 = sensor->gain; + ret = IIO_VAL_INT_PLUS_MICRO; + break; + default: + ret = -EINVAL; + break; + } + + return ret; +} + +static int +st_lsm6dsx_shub_write_raw(struct iio_dev *iio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(iio_dev); + int err; + + err = iio_device_claim_direct_mode(iio_dev); + if (err) + return err; + + switch (mask) { + case IIO_CHAN_INFO_SAMP_FREQ: { + u16 data; + + err = st_lsm6dsx_shub_get_odr_val(sensor, val, &data); + if (!err) + sensor->odr = val; + break; + } + default: + err = -EINVAL; + break; + } + + iio_device_release_direct_mode(iio_dev); + + return err; +} + +static ssize_t +st_lsm6dsx_shub_sampling_freq_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + const struct st_lsm6dsx_ext_dev_settings *settings; + int i, len = 0; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_ODR_LIST_SIZE; i++) { + u16 val = settings->odr_table.odr_avl[i].hz; + + if (val > 0) + len += scnprintf(buf + len, PAGE_SIZE - len, "%d ", + val); + } + buf[len - 1] = '\n'; + + return len; +} + +static ssize_t st_lsm6dsx_shub_scale_avail(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct st_lsm6dsx_sensor *sensor = iio_priv(dev_get_drvdata(dev)); + const struct st_lsm6dsx_ext_dev_settings *settings; + int i, len = 0; + + settings = sensor->ext_info.settings; + for (i = 0; i < ST_LSM6DSX_FS_LIST_SIZE; i++) { + u16 val = settings->fs_table.fs_avl[i].gain; + + if (val > 0) + len += scnprintf(buf + len, PAGE_SIZE - len, "0.%06u ", + val); + } + buf[len - 1] = '\n'; + + return len; +} + +static IIO_DEV_ATTR_SAMP_FREQ_AVAIL(st_lsm6dsx_shub_sampling_freq_avail); +static IIO_DEVICE_ATTR(in_scale_available, 0444, + st_lsm6dsx_shub_scale_avail, NULL, 0); +static struct attribute *st_lsm6dsx_ext_attributes[] = { + &iio_dev_attr_sampling_frequency_available.dev_attr.attr, + &iio_dev_attr_in_scale_available.dev_attr.attr, + NULL, +}; + +static const struct attribute_group st_lsm6dsx_ext_attribute_group = { + .attrs = st_lsm6dsx_ext_attributes, +}; + +static const struct iio_info st_lsm6dsx_ext_info = { + .attrs = &st_lsm6dsx_ext_attribute_group, + .read_raw = st_lsm6dsx_shub_read_raw, + .write_raw = st_lsm6dsx_shub_write_raw, + .hwfifo_set_watermark = st_lsm6dsx_set_watermark, +}; + +static struct iio_dev * +st_lsm6dsx_shub_alloc_iiodev(struct st_lsm6dsx_hw *hw, + enum st_lsm6dsx_sensor_id id, + const struct st_lsm6dsx_ext_dev_settings *info, + u8 i2c_addr, const char *name) +{ + struct iio_chan_spec *ext_channels; + struct st_lsm6dsx_sensor *sensor; + struct iio_dev *iio_dev; + + iio_dev = devm_iio_device_alloc(hw->dev, sizeof(*sensor)); + if (!iio_dev) + return NULL; + + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->dev.parent = hw->dev; + iio_dev->info = &st_lsm6dsx_ext_info; + + sensor = iio_priv(iio_dev); + sensor->id = id; + sensor->hw = hw; + sensor->odr = info->odr_table.odr_avl[0].hz; + sensor->gain = info->fs_table.fs_avl[0].gain; + sensor->ext_info.settings = info; + sensor->ext_info.addr = i2c_addr; + sensor->watermark = 1; + + switch (info->id) { + case ST_LSM6DSX_ID_MAGN: { + const struct iio_chan_spec magn_channels[] = { + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr, + IIO_MOD_X, 0), + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 2, + IIO_MOD_Y, 1), + ST_LSM6DSX_CHANNEL(IIO_MAGN, info->out.addr + 4, + IIO_MOD_Z, 2), + IIO_CHAN_SOFT_TIMESTAMP(3), + }; + + ext_channels = devm_kzalloc(hw->dev, sizeof(magn_channels), + GFP_KERNEL); + if (!ext_channels) + return NULL; + + memcpy(ext_channels, magn_channels, sizeof(magn_channels)); + iio_dev->available_scan_masks = st_lsm6dsx_available_scan_masks; + iio_dev->channels = ext_channels; + iio_dev->num_channels = ARRAY_SIZE(magn_channels); + + scnprintf(sensor->name, sizeof(sensor->name), "%s_magn", + name); + break; + } + default: + return NULL; + } + iio_dev->name = sensor->name; + + return iio_dev; +} + +static int st_lsm6dsx_shub_init_device(struct st_lsm6dsx_sensor *sensor) +{ + const struct st_lsm6dsx_ext_dev_settings *settings; + int err; + + settings = sensor->ext_info.settings; + if (settings->bdu.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->bdu.addr, + settings->bdu.mask, 1); + if (err < 0) + return err; + } + + if (settings->temp_comp.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->temp_comp.addr, + settings->temp_comp.mask, 1); + if (err < 0) + return err; + } + + if (settings->off_canc.addr) { + err = st_lsm6dsx_shub_write_with_mask(sensor, + settings->off_canc.addr, + settings->off_canc.mask, 1); + if (err < 0) + return err; + } + + return 0; +} + +static int +st_lsm6dsx_shub_check_wai(struct st_lsm6dsx_hw *hw, u8 *i2c_addr, + const struct st_lsm6dsx_ext_dev_settings *settings) +{ + const struct st_lsm6dsx_shub_settings *hub_settings; + struct st_lsm6dsx_sensor *sensor; + u8 config[3], data, slv_addr; + bool found = false; + int i, err; + + hub_settings = &hw->settings->shub_settings; + slv_addr = ST_LSM6DSX_SLV_ADDR(0, hub_settings->slv0_addr); + sensor = iio_priv(hw->iio_devs[ST_LSM6DSX_ID_ACC]); + + for (i = 0; i < ARRAY_SIZE(settings->i2c_addr); i++) { + if (!settings->i2c_addr[i]) + continue; + + /* read wai slave register */ + config[0] = (settings->i2c_addr[i] << 1) | 0x1; + config[1] = settings->wai.addr; + config[2] = 0x1; + + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + err = st_lsm6dsx_shub_master_enable(sensor, true); + if (err < 0) + return err; + + st_lsm6dsx_shub_wait_complete(hw); + + err = st_lsm6dsx_shub_read_reg(hw, + hub_settings->shub_out, + &data, sizeof(data)); + + st_lsm6dsx_shub_master_enable(sensor, false); + + if (err < 0) + return err; + + if (data != settings->wai.val) + continue; + + *i2c_addr = settings->i2c_addr[i]; + found = true; + break; + } + + /* reset SLV0 channel */ + memset(config, 0, sizeof(config)); + err = st_lsm6dsx_shub_write_reg(hw, slv_addr, config, + sizeof(config)); + if (err < 0) + return err; + + return found ? 0 : -ENODEV; +} + +int st_lsm6dsx_shub_probe(struct st_lsm6dsx_hw *hw, const char *name) +{ + enum st_lsm6dsx_sensor_id id = ST_LSM6DSX_ID_EXT0; + struct st_lsm6dsx_sensor *sensor; + int err, i, num_ext_dev = 0; + u8 i2c_addr = 0; + + for (i = 0; i < ARRAY_SIZE(st_lsm6dsx_ext_dev_table); i++) { + err = st_lsm6dsx_shub_check_wai(hw, &i2c_addr, + &st_lsm6dsx_ext_dev_table[i]); + if (err == -ENODEV) + continue; + else if (err < 0) + return err; + + hw->iio_devs[id] = st_lsm6dsx_shub_alloc_iiodev(hw, id, + &st_lsm6dsx_ext_dev_table[i], + i2c_addr, name); + if (!hw->iio_devs[id]) + return -ENOMEM; + + sensor = iio_priv(hw->iio_devs[id]); + err = st_lsm6dsx_shub_init_device(sensor); + if (err < 0) + return err; + + if (++num_ext_dev >= ST_LSM6DSX_MAX_SLV_NUM) + break; + id++; + } + + return 0; +} |