diff options
Diffstat (limited to 'drivers/iio/light/Kconfig')
| -rw-r--r-- | drivers/iio/light/Kconfig | 275 |
1 files changed, 138 insertions, 137 deletions
diff --git a/drivers/iio/light/Kconfig b/drivers/iio/light/Kconfig index 5190eacfeb0a..e3fd00b595d0 100644 --- a/drivers/iio/light/Kconfig +++ b/drivers/iio/light/Kconfig @@ -1,3 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0-only # # Light sensors @@ -13,11 +14,11 @@ config ACPI_ALS select IIO_TRIGGERED_BUFFER select IIO_KFIFO_BUF help - Say Y here if you want to build a driver for the ACPI0008 - Ambient Light Sensor. + Say Y here if you want to build a driver for the ACPI0008 + Ambient Light Sensor. - To compile this driver as a module, choose M here: the module will - be called acpi-als. + To compile this driver as a module, choose M here: the module will + be called acpi-als. config ADJD_S311 tristate "ADJD-S311-CR999 digital color sensor" @@ -25,31 +26,31 @@ config ADJD_S311 select IIO_TRIGGERED_BUFFER depends on I2C help - If you say yes here you get support for the Avago ADJD-S311-CR999 - digital color light sensor. + If you say yes here you get support for the Avago ADJD-S311-CR999 + digital color light sensor. - This driver can also be built as a module. If so, the module - will be called adjd_s311. + This driver can also be built as a module. If so, the module + will be called adjd_s311. config AL3320A tristate "AL3320A ambient light sensor" depends on I2C help - Say Y here if you want to build a driver for the Dyna Image AL3320A - ambient light sensor. + Say Y here if you want to build a driver for the Dyna Image AL3320A + ambient light sensor. - To compile this driver as a module, choose M here: the - module will be called al3320a. + To compile this driver as a module, choose M here: the + module will be called al3320a. config APDS9300 tristate "APDS9300 ambient light sensor" depends on I2C help - Say Y here if you want to build a driver for the Avago APDS9300 - ambient light sensor. + Say Y here if you want to build a driver for the Avago APDS9300 + ambient light sensor. - To compile this driver as a module, choose M here: the - module will be called apds9300. + To compile this driver as a module, choose M here: the + module will be called apds9300. config APDS9960 tristate "Avago APDS9960 gesture/RGB/ALS/proximity sensor" @@ -68,74 +69,74 @@ config BH1750 tristate "ROHM BH1750 ambient light sensor" depends on I2C help - Say Y here to build support for the ROHM BH1710, BH1715, BH1721, - BH1750, BH1751 ambient light sensors. + Say Y here to build support for the ROHM BH1710, BH1715, BH1721, + BH1750, BH1751 ambient light sensors. - To compile this driver as a module, choose M here: the module will - be called bh1750. + To compile this driver as a module, choose M here: the module will + be called bh1750. config BH1780 tristate "ROHM BH1780 ambient light sensor" depends on I2C help - Say Y here to build support for the ROHM BH1780GLI ambient - light sensor. + Say Y here to build support for the ROHM BH1780GLI ambient + light sensor. - To compile this driver as a module, choose M here: the module will - be called bh1780. + To compile this driver as a module, choose M here: the module will + be called bh1780. config CM32181 depends on I2C tristate "CM32181 driver" help - Say Y here if you use cm32181. - This option enables ambient light sensor using - Capella cm32181 device driver. + Say Y here if you use cm32181. + This option enables ambient light sensor using + Capella cm32181 device driver. - To compile this driver as a module, choose M here: - the module will be called cm32181. + To compile this driver as a module, choose M here: + the module will be called cm32181. config CM3232 depends on I2C tristate "CM3232 ambient light sensor" help - Say Y here if you use cm3232. - This option enables ambient light sensor using - Capella Microsystems cm3232 device driver. + Say Y here if you use cm3232. + This option enables ambient light sensor using + Capella Microsystems cm3232 device driver. - To compile this driver as a module, choose M here: - the module will be called cm3232. + To compile this driver as a module, choose M here: + the module will be called cm3232. config CM3323 depends on I2C tristate "Capella CM3323 color light sensor" help - Say Y here if you want to build a driver for Capella CM3323 - color sensor. + Say Y here if you want to build a driver for Capella CM3323 + color sensor. - To compile this driver as a module, choose M here: the module will - be called cm3323. + To compile this driver as a module, choose M here: the module will + be called cm3323. config CM3605 tristate "Capella CM3605 ambient light and proximity sensor" depends on OF help - Say Y here if you want to build a driver for Capella CM3605 - ambient light and short range proximity sensor. + Say Y here if you want to build a driver for Capella CM3605 + ambient light and short range proximity sensor. - To compile this driver as a module, choose M here: the module will - be called cm3605. + To compile this driver as a module, choose M here: the module will + be called cm3605. config CM36651 depends on I2C tristate "CM36651 driver" help - Say Y here if you use cm36651. - This option enables proximity & RGB sensor using - Capella cm36651 device driver. + Say Y here if you use cm36651. + This option enables proximity & RGB sensor using + Capella cm36651 device driver. - To compile this driver as a module, choose M here: - the module will be called cm36651. + To compile this driver as a module, choose M here: + the module will be called cm36651. config IIO_CROS_EC_LIGHT_PROX tristate "ChromeOS EC Light and Proximity Sensors" @@ -167,21 +168,21 @@ config SENSORS_ISL29018 select REGMAP_I2C default n help - If you say yes here you get support for ambient light sensing and - proximity infrared sensing from Intersil ISL29018. - This driver will provide the measurements of ambient light intensity - in lux, proximity infrared sensing and normal infrared sensing. - Data from sensor is accessible via sysfs. + If you say yes here you get support for ambient light sensing and + proximity infrared sensing from Intersil ISL29018. + This driver will provide the measurements of ambient light intensity + in lux, proximity infrared sensing and normal infrared sensing. + Data from sensor is accessible via sysfs. config SENSORS_ISL29028 tristate "Intersil ISL29028 Concurrent Light and Proximity Sensor" depends on I2C select REGMAP_I2C help - Provides driver for the Intersil's ISL29028 device. - This driver supports the sysfs interface to get the ALS, IR intensity, - Proximity value via iio. The ISL29028 provides the concurrent sensing - of ambient light and proximity. + Provides driver for the Intersil's ISL29028 device. + This driver supports the sysfs interface to get the ALS, IR intensity, + Proximity value via iio. The ISL29028 provides the concurrent sensing + of ambient light and proximity. config ISL29125 tristate "Intersil ISL29125 digital color light sensor" @@ -228,22 +229,22 @@ config JSA1212 depends on I2C select REGMAP_I2C help - Say Y here if you want to build a IIO driver for JSA1212 - proximity & ALS sensor device. + Say Y here if you want to build a IIO driver for JSA1212 + proximity & ALS sensor device. - To compile this driver as a module, choose M here: - the module will be called jsa1212. + To compile this driver as a module, choose M here: + the module will be called jsa1212. config RPR0521 tristate "ROHM RPR0521 ALS and proximity sensor driver" depends on I2C select REGMAP_I2C help - Say Y here if you want to build support for ROHM's RPR0521 - ambient light and proximity sensor device. + Say Y here if you want to build support for ROHM's RPR0521 + ambient light and proximity sensor device. - To compile this driver as a module, choose M here: - the module will be called rpr0521. + To compile this driver as a module, choose M here: + the module will be called rpr0521. config SENSORS_LM3533 tristate "LM3533 ambient light sensor" @@ -269,22 +270,22 @@ config LTR501 select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - If you say yes here you get support for the Lite-On LTR-501ALS-01 - ambient light and proximity sensor. This driver also supports LTR-559 - ALS/PS or LTR-301 ALS sensors. + If you say yes here you get support for the Lite-On LTR-501ALS-01 + ambient light and proximity sensor. This driver also supports LTR-559 + ALS/PS or LTR-301 ALS sensors. - This driver can also be built as a module. If so, the module - will be called ltr501. + This driver can also be built as a module. If so, the module + will be called ltr501. config LV0104CS tristate "LV0104CS Ambient Light Sensor" depends on I2C help - Say Y here if you want to build support for the On Semiconductor - LV0104CS ambient light sensor. + Say Y here if you want to build support for the On Semiconductor + LV0104CS ambient light sensor. - To compile this driver as a module, choose M here: - the module will be called lv0104cs. + To compile this driver as a module, choose M here: + the module will be called lv0104cs. config MAX44000 tristate "MAX44000 Ambient and Infrared Proximity Sensor" @@ -293,11 +294,11 @@ config MAX44000 select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - Say Y here if you want to build support for Maxim Integrated's - MAX44000 ambient and infrared proximity sensor device. + Say Y here if you want to build support for Maxim Integrated's + MAX44000 ambient and infrared proximity sensor device. - To compile this driver as a module, choose M here: - the module will be called max44000. + To compile this driver as a module, choose M here: + the module will be called max44000. config MAX44009 tristate "MAX44009 Ambient Light Sensor" @@ -320,15 +321,15 @@ config OPT3001 opt3001. config PA12203001 - tristate "TXC PA12203001 light and proximity sensor" - depends on I2C - select REGMAP_I2C - help - If you say yes here you get support for the TXC PA12203001 - ambient light and proximity sensor. + tristate "TXC PA12203001 light and proximity sensor" + depends on I2C + select REGMAP_I2C + help + If you say yes here you get support for the TXC PA12203001 + ambient light and proximity sensor. - This driver can also be built as a module. If so, the module - will be called pa12203001. + This driver can also be built as a module. If so, the module + will be called pa12203001. config SI1133 tristate "SI1133 UV Index Sensor and Ambient Light Sensor" @@ -359,12 +360,12 @@ config STK3310 depends on I2C select REGMAP_I2C help - Say yes here to get support for the Sensortek STK3310 ambient light - and proximity sensor. The STK3311 model is also supported by this - driver. + Say yes here to get support for the Sensortek STK3310 ambient light + and proximity sensor. The STK3311 model is also supported by this + driver. - Choosing M will build the driver as a module. If so, the module - will be called stk3310. + Choosing M will build the driver as a module. If so, the module + will be called stk3310. config ST_UVIS25 tristate "STMicroelectronics UVIS25 sensor driver" @@ -396,11 +397,11 @@ config TCS3414 select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - If you say yes here you get support for the TAOS TCS3414 - family of digital color sensors. + If you say yes here you get support for the TAOS TCS3414 + family of digital color sensors. - This driver can also be built as a module. If so, the module - will be called tcs3414. + This driver can also be built as a module. If so, the module + will be called tcs3414. config TCS3472 tristate "TAOS TCS3472 color light-to-digital converter" @@ -408,67 +409,67 @@ config TCS3472 select IIO_BUFFER select IIO_TRIGGERED_BUFFER help - If you say yes here you get support for the TAOS TCS3472 - family of color light-to-digital converters with IR filter. + If you say yes here you get support for the TAOS TCS3472 + family of color light-to-digital converters with IR filter. - This driver can also be built as a module. If so, the module - will be called tcs3472. + This driver can also be built as a module. If so, the module + will be called tcs3472. config SENSORS_TSL2563 tristate "TAOS TSL2560, TSL2561, TSL2562 and TSL2563 ambient light sensors" depends on I2C help - If you say yes here you get support for the Taos TSL2560, - TSL2561, TSL2562 and TSL2563 ambient light sensors. + If you say yes here you get support for the Taos TSL2560, + TSL2561, TSL2562 and TSL2563 ambient light sensors. - This driver can also be built as a module. If so, the module - will be called tsl2563. + This driver can also be built as a module. If so, the module + will be called tsl2563. config TSL2583 tristate "TAOS TSL2580, TSL2581 and TSL2583 light-to-digital converters" depends on I2C help - Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. - Access ALS data via iio, sysfs. + Provides support for the TAOS tsl2580, tsl2581 and tsl2583 devices. + Access ALS data via iio, sysfs. config TSL2772 tristate "TAOS TSL/TMD2x71 and TSL/TMD2x72 Family of light and proximity sensors" depends on I2C help - Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, - tmd2672, tsl2772, tmd2772 devices. - Provides iio_events and direct access via sysfs. + Support for: tsl2571, tsl2671, tmd2671, tsl2771, tmd2771, tsl2572, tsl2672, + tmd2672, tsl2772, tmd2772 devices. + Provides iio_events and direct access via sysfs. config TSL4531 tristate "TAOS TSL4531 ambient light sensors" depends on I2C help - Say Y here if you want to build a driver for the TAOS TSL4531 family - of ambient light sensors with direct lux output. + Say Y here if you want to build a driver for the TAOS TSL4531 family + of ambient light sensors with direct lux output. - To compile this driver as a module, choose M here: the - module will be called tsl4531. + To compile this driver as a module, choose M here: the + module will be called tsl4531. config US5182D tristate "UPISEMI light and proximity sensor" depends on I2C help - If you say yes here you get support for the UPISEMI US5182D - ambient light and proximity sensor. + If you say yes here you get support for the UPISEMI US5182D + ambient light and proximity sensor. - This driver can also be built as a module. If so, the module - will be called us5182d. + This driver can also be built as a module. If so, the module + will be called us5182d. config VCNL4000 tristate "VCNL4000/4010/4020/4200 combined ALS and proximity sensor" depends on I2C help - Say Y here if you want to build a driver for the Vishay VCNL4000, - VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity - sensor. + Say Y here if you want to build a driver for the Vishay VCNL4000, + VCNL4010, VCNL4020, VCNL4200 combined ambient light and proximity + sensor. - To compile this driver as a module, choose M here: the - module will be called vcnl4000. + To compile this driver as a module, choose M here: the + module will be called vcnl4000. config VCNL4035 tristate "VCNL4035 combined ALS and proximity sensor" @@ -476,41 +477,41 @@ config VCNL4035 select REGMAP_I2C depends on I2C help - Say Y here if you want to build a driver for the Vishay VCNL4035, - combined ambient light (ALS) and proximity sensor. Currently only ALS - function is available. + Say Y here if you want to build a driver for the Vishay VCNL4035, + combined ambient light (ALS) and proximity sensor. Currently only ALS + function is available. - To compile this driver as a module, choose M here: the - module will be called vcnl4035. + To compile this driver as a module, choose M here: the + module will be called vcnl4035. config VEML6070 tristate "VEML6070 UV A light sensor" depends on I2C help - Say Y here if you want to build a driver for the Vishay VEML6070 UV A - light sensor. + Say Y here if you want to build a driver for the Vishay VEML6070 UV A + light sensor. - To compile this driver as a module, choose M here: the - module will be called veml6070. + To compile this driver as a module, choose M here: the + module will be called veml6070. config VL6180 tristate "VL6180 ALS, range and proximity sensor" depends on I2C help - Say Y here if you want to build a driver for the STMicroelectronics - VL6180 combined ambient light, range and proximity sensor. + Say Y here if you want to build a driver for the STMicroelectronics + VL6180 combined ambient light, range and proximity sensor. - To compile this driver as a module, choose M here: the - module will be called vl6180. + To compile this driver as a module, choose M here: the + module will be called vl6180. config ZOPT2201 tristate "ZOPT2201 ALS and UV B sensor" depends on I2C help - Say Y here if you want to build a driver for the IDT - ZOPT2201 ambient light and UV B sensor. + Say Y here if you want to build a driver for the IDT + ZOPT2201 ambient light and UV B sensor. - To compile this driver as a module, choose M here: the - module will be called zopt2201. + To compile this driver as a module, choose M here: the + module will be called zopt2201. endmenu |