diff options
Diffstat (limited to 'drivers/input/keyboard')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 11 | ||||
| -rw-r--r-- | drivers/input/keyboard/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/keyboard/adp5588-keys.c | 2 | ||||
| -rw-r--r-- | drivers/input/keyboard/dlink-dir685-touchkeys.c | 155 | ||||
| -rw-r--r-- | drivers/input/keyboard/gpio_keys.c | 17 | ||||
| -rw-r--r-- | drivers/input/keyboard/lm8323.c | 2 | ||||
| -rw-r--r-- | drivers/input/keyboard/mcs_touchkey.c | 2 |
7 files changed, 186 insertions, 4 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 97acd6524ad7..4c4ab1ced235 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -178,6 +178,17 @@ config KEYBOARD_CLPS711X To compile this driver as a module, choose M here: the module will be called clps711x-keypad. +config KEYBOARD_DLINK_DIR685 + tristate "D-Link DIR-685 touchkeys support" + depends on I2C + default ARCH_GEMINI + help + If you say yes here you get support for the D-Link DIR-685 + touchkeys. + + To compile this driver as a module, choose M here: the + module will be called dlink-dir685-touchkeys. + config KEYBOARD_LKKBD tristate "DECstation/VAXstation LK201/LK401 keyboard" select SERIO diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 7d9acff819a7..d2338bacdad1 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_KEYBOARD_CAP11XX) += cap11xx.o obj-$(CONFIG_KEYBOARD_CLPS711X) += clps711x-keypad.o obj-$(CONFIG_KEYBOARD_CROS_EC) += cros_ec_keyb.o obj-$(CONFIG_KEYBOARD_DAVINCI) += davinci_keyscan.o +obj-$(CONFIG_KEYBOARD_DLINK_DIR685) += dlink-dir685-touchkeys.o obj-$(CONFIG_KEYBOARD_EP93XX) += ep93xx_keypad.o obj-$(CONFIG_KEYBOARD_GOLDFISH_EVENTS) += goldfish_events.o obj-$(CONFIG_KEYBOARD_GPIO) += gpio_keys.o diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 53fe9a3fb620..f9d273c8b306 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -20,7 +20,7 @@ #include <linux/gpio.h> #include <linux/slab.h> -#include <linux/i2c/adp5588.h> +#include <linux/platform_data/adp5588.h> /* Key Event Register xy */ #define KEY_EV_PRESSED (1 << 7) diff --git a/drivers/input/keyboard/dlink-dir685-touchkeys.c b/drivers/input/keyboard/dlink-dir685-touchkeys.c new file mode 100644 index 000000000000..88e321b76397 --- /dev/null +++ b/drivers/input/keyboard/dlink-dir685-touchkeys.c @@ -0,0 +1,155 @@ +/* + * D-Link DIR-685 router I2C-based Touchkeys input driver + * Copyright (C) 2017 Linus Walleij <linus.walleij@linaro.org> + * + * This is a one-off touchkey controller based on the Cypress Semiconductor + * CY8C214 MCU with some firmware in its internal 8KB flash. The circuit + * board inside the router is named E119921 + */ + +#include <linux/module.h> +#include <linux/i2c.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/input.h> +#include <linux/slab.h> +#include <linux/bitops.h> + +struct dir685_touchkeys { + struct device *dev; + struct i2c_client *client; + struct input_dev *input; + unsigned long cur_key; + u16 codes[7]; +}; + +static irqreturn_t dir685_tk_irq_thread(int irq, void *data) +{ + struct dir685_touchkeys *tk = data; + const int num_bits = min_t(int, ARRAY_SIZE(tk->codes), 16); + unsigned long changed; + u8 buf[6]; + unsigned long key; + int i; + int err; + + memset(buf, 0, sizeof(buf)); + err = i2c_master_recv(tk->client, buf, sizeof(buf)); + if (err != sizeof(buf)) { + dev_err(tk->dev, "short read %d\n", err); + return IRQ_HANDLED; + } + + dev_dbg(tk->dev, "IN: %*ph\n", (int)sizeof(buf), buf); + key = be16_to_cpup((__be16 *) &buf[4]); + + /* Figure out if any bits went high or low since last message */ + changed = tk->cur_key ^ key; + for_each_set_bit(i, &changed, num_bits) { + dev_dbg(tk->dev, "key %d is %s\n", i, + test_bit(i, &key) ? "down" : "up"); + input_report_key(tk->input, tk->codes[i], test_bit(i, &key)); + } + + /* Store currently down keys */ + tk->cur_key = key; + input_sync(tk->input); + + return IRQ_HANDLED; +} + +static int dir685_tk_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct dir685_touchkeys *tk; + struct device *dev = &client->dev; + u8 bl_data[] = { 0xa7, 0x40 }; + int err; + int i; + + tk = devm_kzalloc(&client->dev, sizeof(*tk), GFP_KERNEL); + if (!tk) + return -ENOMEM; + + tk->input = devm_input_allocate_device(dev); + if (!tk->input) + return -ENOMEM; + + tk->client = client; + tk->dev = dev; + + tk->input->keycodesize = sizeof(u16); + tk->input->keycodemax = ARRAY_SIZE(tk->codes); + tk->input->keycode = tk->codes; + tk->codes[0] = KEY_UP; + tk->codes[1] = KEY_DOWN; + tk->codes[2] = KEY_LEFT; + tk->codes[3] = KEY_RIGHT; + tk->codes[4] = KEY_ENTER; + tk->codes[5] = KEY_WPS_BUTTON; + /* + * This key appears in the vendor driver, but I have + * not been able to activate it. + */ + tk->codes[6] = KEY_RESERVED; + + __set_bit(EV_KEY, tk->input->evbit); + for (i = 0; i < ARRAY_SIZE(tk->codes); i++) + __set_bit(tk->codes[i], tk->input->keybit); + __clear_bit(KEY_RESERVED, tk->input->keybit); + + tk->input->name = "D-Link DIR-685 touchkeys"; + tk->input->id.bustype = BUS_I2C; + + err = input_register_device(tk->input); + if (err) + return err; + + /* Set the brightness to max level */ + err = i2c_master_send(client, bl_data, sizeof(bl_data)); + if (err != sizeof(bl_data)) + dev_warn(tk->dev, "error setting brightness level\n"); + + if (!client->irq) { + dev_err(dev, "no IRQ on the I2C device\n"); + return -ENODEV; + } + err = devm_request_threaded_irq(dev, client->irq, + NULL, dir685_tk_irq_thread, + IRQF_ONESHOT, + "dir685-tk", tk); + if (err) { + dev_err(dev, "can't request IRQ\n"); + return err; + } + + return 0; +} + +static const struct i2c_device_id dir685_tk_id[] = { + { "dir685tk", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, dir685_tk_id); + +#ifdef CONFIG_OF +static const struct of_device_id dir685_tk_of_match[] = { + { .compatible = "dlink,dir685-touchkeys" }, + {}, +}; +MODULE_DEVICE_TABLE(of, dir685_tk_of_match); +#endif + +static struct i2c_driver dir685_tk_i2c_driver = { + .driver = { + .name = "dlin-dir685-touchkeys", + .of_match_table = of_match_ptr(dir685_tk_of_match), + }, + .probe = dir685_tk_probe, + .id_table = dir685_tk_id, +}; +module_i2c_driver(dir685_tk_i2c_driver); + +MODULE_AUTHOR("Linus Walleij <linus.walleij@linaro.org>"); +MODULE_DESCRIPTION("D-Link DIR-685 touchkeys driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index da3d362f21b1..a047b9af8369 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -48,6 +48,7 @@ struct gpio_button_data { spinlock_t lock; bool disabled; bool key_pressed; + bool suspended; }; struct gpio_keys_drvdata { @@ -396,8 +397,20 @@ static irqreturn_t gpio_keys_gpio_isr(int irq, void *dev_id) BUG_ON(irq != bdata->irq); - if (bdata->button->wakeup) + if (bdata->button->wakeup) { + const struct gpio_keys_button *button = bdata->button; + pm_stay_awake(bdata->input->dev.parent); + if (bdata->suspended && + (button->type == 0 || button->type == EV_KEY)) { + /* + * Simulate wakeup key press in case the key has + * already released by the time we got interrupt + * handler to run. + */ + input_report_key(bdata->input, button->code, 1); + } + } mod_delayed_work(system_wq, &bdata->work, @@ -855,6 +868,7 @@ static int __maybe_unused gpio_keys_suspend(struct device *dev) struct gpio_button_data *bdata = &ddata->data[i]; if (bdata->button->wakeup) enable_irq_wake(bdata->irq); + bdata->suspended = true; } } else { mutex_lock(&input->mutex); @@ -878,6 +892,7 @@ static int __maybe_unused gpio_keys_resume(struct device *dev) struct gpio_button_data *bdata = &ddata->data[i]; if (bdata->button->wakeup) disable_irq_wake(bdata->irq); + bdata->suspended = false; } } else { mutex_lock(&input->mutex); diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c index 21bea52d4365..04a5d7e134d7 100644 --- a/drivers/input/keyboard/lm8323.c +++ b/drivers/input/keyboard/lm8323.c @@ -30,8 +30,8 @@ #include <linux/delay.h> #include <linux/input.h> #include <linux/leds.h> +#include <linux/platform_data/lm8323.h> #include <linux/pm.h> -#include <linux/i2c/lm8323.h> #include <linux/slab.h> /* Commands to send to the chip. */ diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c index 31090d71a685..be56d4f262a7 100644 --- a/drivers/input/keyboard/mcs_touchkey.c +++ b/drivers/input/keyboard/mcs_touchkey.c @@ -13,11 +13,11 @@ #include <linux/module.h> #include <linux/i2c.h> -#include <linux/i2c/mcs.h> #include <linux/interrupt.h> #include <linux/input.h> #include <linux/irq.h> #include <linux/slab.h> +#include <linux/platform_data/mcs.h> #include <linux/pm.h> /* MCS5000 Touchkey */ |