diff options
Diffstat (limited to 'drivers/input/keyboard')
| -rw-r--r-- | drivers/input/keyboard/Kconfig | 31 | ||||
| -rw-r--r-- | drivers/input/keyboard/Makefile | 3 | ||||
| -rw-r--r-- | drivers/input/keyboard/adp5588-keys.c | 351 | ||||
| -rw-r--r-- | drivers/input/keyboard/gpio_keys.c | 41 | ||||
| -rw-r--r-- | drivers/input/keyboard/hil_kbd.c | 21 | ||||
| -rw-r--r-- | drivers/input/keyboard/lm8323.c | 12 | ||||
| -rw-r--r-- | drivers/input/keyboard/matrix_keypad.c | 108 | ||||
| -rw-r--r-- | drivers/input/keyboard/mcs_touchkey.c | 239 | ||||
| -rw-r--r-- | drivers/input/keyboard/samsung-keypad.c | 491 | ||||
| -rw-r--r-- | drivers/input/keyboard/stmpe-keypad.c | 386 |
10 files changed, 1627 insertions, 56 deletions
diff --git a/drivers/input/keyboard/Kconfig b/drivers/input/keyboard/Kconfig index 1ba25145b333..9cc488d21490 100644 --- a/drivers/input/keyboard/Kconfig +++ b/drivers/input/keyboard/Kconfig @@ -297,6 +297,18 @@ config KEYBOARD_MAX7359 To compile this driver as a module, choose M here: the module will be called max7359_keypad. +config KEYBOARD_MCS + tristate "MELFAS MCS Touchkey" + depends on I2C + help + Say Y here if you have the MELFAS MCS5000/5080 touchkey controller + chip in your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called mcs_touchkey. + config KEYBOARD_IMX tristate "IMX keypad support" depends on ARCH_MXC @@ -342,6 +354,15 @@ config KEYBOARD_PXA930_ROTARY To compile this driver as a module, choose M here: the module will be called pxa930_rotary. +config KEYBOARD_SAMSUNG + tristate "Samsung keypad support" + depends on SAMSUNG_DEV_KEYPAD + help + Say Y here if you want to use the Samsung keypad. + + To compile this driver as a module, choose M here: the + module will be called samsung-keypad. + config KEYBOARD_STOWAWAY tristate "Stowaway keyboard" select SERIO @@ -374,6 +395,16 @@ config KEYBOARD_SH_KEYSC To compile this driver as a module, choose M here: the module will be called sh_keysc. +config KEYBOARD_STMPE + tristate "STMPE keypad support" + depends on MFD_STMPE + help + Say Y here if you want to use the keypad controller on STMPE I/O + expanders. + + To compile this driver as a module, choose M here: the module will be + called stmpe-keypad. + config KEYBOARD_DAVINCI tristate "TI DaVinci Key Scan" depends on ARCH_DAVINCI_DM365 diff --git a/drivers/input/keyboard/Makefile b/drivers/input/keyboard/Makefile index 4596d0c6f922..504b591be0cd 100644 --- a/drivers/input/keyboard/Makefile +++ b/drivers/input/keyboard/Makefile @@ -26,13 +26,16 @@ obj-$(CONFIG_KEYBOARD_LOCOMO) += locomokbd.o obj-$(CONFIG_KEYBOARD_MAPLE) += maple_keyb.o obj-$(CONFIG_KEYBOARD_MATRIX) += matrix_keypad.o obj-$(CONFIG_KEYBOARD_MAX7359) += max7359_keypad.o +obj-$(CONFIG_KEYBOARD_MCS) += mcs_touchkey.o obj-$(CONFIG_KEYBOARD_NEWTON) += newtonkbd.o obj-$(CONFIG_KEYBOARD_OMAP) += omap-keypad.o obj-$(CONFIG_KEYBOARD_OPENCORES) += opencores-kbd.o obj-$(CONFIG_KEYBOARD_PXA27x) += pxa27x_keypad.o obj-$(CONFIG_KEYBOARD_PXA930_ROTARY) += pxa930_rotary.o obj-$(CONFIG_KEYBOARD_QT2160) += qt2160.o +obj-$(CONFIG_KEYBOARD_SAMSUNG) += samsung-keypad.o obj-$(CONFIG_KEYBOARD_SH_KEYSC) += sh_keysc.o +obj-$(CONFIG_KEYBOARD_STMPE) += stmpe-keypad.o obj-$(CONFIG_KEYBOARD_STOWAWAY) += stowaway.o obj-$(CONFIG_KEYBOARD_SUNKBD) += sunkbd.o obj-$(CONFIG_KEYBOARD_TWL4030) += twl4030_keypad.o diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 744600eff222..d6918cb966c0 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -19,6 +19,7 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/i2c.h> +#include <linux/gpio.h> #include <linux/slab.h> #include <linux/i2c/adp5588.h> @@ -54,6 +55,10 @@ #define KEYP_MAX_EVENT 10 +#define MAXGPIO 18 +#define ADP_BANK(offs) ((offs) >> 3) +#define ADP_BIT(offs) (1u << ((offs) & 0x7)) + /* * Early pre 4.0 Silicon required to delay readout by at least 25ms, * since the Event Counter Register updated 25ms after the interrupt @@ -67,6 +72,16 @@ struct adp5588_kpad { struct delayed_work work; unsigned long delay; unsigned short keycode[ADP5588_KEYMAPSIZE]; + const struct adp5588_gpi_map *gpimap; + unsigned short gpimapsize; +#ifdef CONFIG_GPIOLIB + unsigned char gpiomap[MAXGPIO]; + bool export_gpio; + struct gpio_chip gc; + struct mutex gpio_lock; /* Protect cached dir, dat_out */ + u8 dat_out[3]; + u8 dir[3]; +#endif }; static int adp5588_read(struct i2c_client *client, u8 reg) @@ -84,12 +99,222 @@ static int adp5588_write(struct i2c_client *client, u8 reg, u8 val) return i2c_smbus_write_byte_data(client, reg, val); } +#ifdef CONFIG_GPIOLIB +static int adp5588_gpio_get_value(struct gpio_chip *chip, unsigned off) +{ + struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); + unsigned int bank = ADP_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + + return !!(adp5588_read(kpad->client, GPIO_DAT_STAT1 + bank) & bit); +} + +static void adp5588_gpio_set_value(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); + unsigned int bank = ADP_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + + mutex_lock(&kpad->gpio_lock); + + if (val) + kpad->dat_out[bank] |= bit; + else + kpad->dat_out[bank] &= ~bit; + + adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank, + kpad->dat_out[bank]); + + mutex_unlock(&kpad->gpio_lock); +} + +static int adp5588_gpio_direction_input(struct gpio_chip *chip, unsigned off) +{ + struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); + unsigned int bank = ADP_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + int ret; + + mutex_lock(&kpad->gpio_lock); + + kpad->dir[bank] &= ~bit; + ret = adp5588_write(kpad->client, GPIO_DIR1 + bank, kpad->dir[bank]); + + mutex_unlock(&kpad->gpio_lock); + + return ret; +} + +static int adp5588_gpio_direction_output(struct gpio_chip *chip, + unsigned off, int val) +{ + struct adp5588_kpad *kpad = container_of(chip, struct adp5588_kpad, gc); + unsigned int bank = ADP_BANK(kpad->gpiomap[off]); + unsigned int bit = ADP_BIT(kpad->gpiomap[off]); + int ret; + + mutex_lock(&kpad->gpio_lock); + + kpad->dir[bank] |= bit; + + if (val) + kpad->dat_out[bank] |= bit; + else + kpad->dat_out[bank] &= ~bit; + + ret = adp5588_write(kpad->client, GPIO_DAT_OUT1 + bank, + kpad->dat_out[bank]); + ret |= adp5588_write(kpad->client, GPIO_DIR1 + bank, + kpad->dir[bank]); + + mutex_unlock(&kpad->gpio_lock); + + return ret; +} + +static int __devinit adp5588_build_gpiomap(struct adp5588_kpad *kpad, + const struct adp5588_kpad_platform_data *pdata) +{ + bool pin_used[MAXGPIO]; + int n_unused = 0; + int i; + + memset(pin_used, 0, sizeof(pin_used)); + + for (i = 0; i < pdata->rows; i++) + pin_used[i] = true; + + for (i = 0; i < pdata->cols; i++) + pin_used[i + GPI_PIN_COL_BASE - GPI_PIN_BASE] = true; + + for (i = 0; i < kpad->gpimapsize; i++) + pin_used[kpad->gpimap[i].pin - GPI_PIN_BASE] = true; + + for (i = 0; i < MAXGPIO; i++) + if (!pin_used[i]) + kpad->gpiomap[n_unused++] = i; + + return n_unused; +} + +static int __devinit adp5588_gpio_add(struct adp5588_kpad *kpad) +{ + struct device *dev = &kpad->client->dev; + const struct adp5588_kpad_platform_data *pdata = dev->platform_data; + const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data; + int i, error; + + if (!gpio_data) + return 0; + + kpad->gc.ngpio = adp5588_build_gpiomap(kpad, pdata); + if (kpad->gc.ngpio == 0) { + dev_info(dev, "No unused gpios left to export\n"); + return 0; + } + + kpad->export_gpio = true; + + kpad->gc.direction_input = adp5588_gpio_direction_input; + kpad->gc.direction_output = adp5588_gpio_direction_output; + kpad->gc.get = adp5588_gpio_get_value; + kpad->gc.set = adp5588_gpio_set_value; + kpad->gc.can_sleep = 1; + + kpad->gc.base = gpio_data->gpio_start; + kpad->gc.label = kpad->client->name; + kpad->gc.owner = THIS_MODULE; + + mutex_init(&kpad->gpio_lock); + + error = gpiochip_add(&kpad->gc); + if (error) { + dev_err(dev, "gpiochip_add failed, err: %d\n", error); + return error; + } + + for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + kpad->dat_out[i] = adp5588_read(kpad->client, + GPIO_DAT_OUT1 + i); + kpad->dir[i] = adp5588_read(kpad->client, GPIO_DIR1 + i); + } + + if (gpio_data->setup) { + error = gpio_data->setup(kpad->client, + kpad->gc.base, kpad->gc.ngpio, + gpio_data->context); + if (error) + dev_warn(dev, "setup failed, %d\n", error); + } + + return 0; +} + +static void __devexit adp5588_gpio_remove(struct adp5588_kpad *kpad) +{ + struct device *dev = &kpad->client->dev; + const struct adp5588_kpad_platform_data *pdata = dev->platform_data; + const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data; + int error; + + if (!kpad->export_gpio) + return; + + if (gpio_data->teardown) { + error = gpio_data->teardown(kpad->client, + kpad->gc.base, kpad->gc.ngpio, + gpio_data->context); + if (error) + dev_warn(dev, "teardown failed %d\n", error); + } + + error = gpiochip_remove(&kpad->gc); + if (error) + dev_warn(dev, "gpiochip_remove failed %d\n", error); +} +#else +static inline int adp5588_gpio_add(struct adp5588_kpad *kpad) +{ + return 0; +} + +static inline void adp5588_gpio_remove(struct adp5588_kpad *kpad) +{ +} +#endif + +static void adp5588_report_events(struct adp5588_kpad *kpad, int ev_cnt) +{ + int i, j; + + for (i = 0; i < ev_cnt; i++) { + int key = adp5588_read(kpad->client, Key_EVENTA + i); + int key_val = key & KEY_EV_MASK; + + if (key_val >= GPI_PIN_BASE && key_val <= GPI_PIN_END) { + for (j = 0; j < kpad->gpimapsize; j++) { + if (key_val == kpad->gpimap[j].pin) { + input_report_switch(kpad->input, + kpad->gpimap[j].sw_evt, + key & KEY_EV_PRESSED); + break; + } + } + } else { + input_report_key(kpad->input, + kpad->keycode[key_val - 1], + key & KEY_EV_PRESSED); + } + } +} + static void adp5588_work(struct work_struct *work) { struct adp5588_kpad *kpad = container_of(work, struct adp5588_kpad, work.work); struct i2c_client *client = kpad->client; - int i, key, status, ev_cnt; + int status, ev_cnt; status = adp5588_read(client, INT_STAT); @@ -99,12 +324,7 @@ static void adp5588_work(struct work_struct *work) if (status & KE_INT) { ev_cnt = adp5588_read(client, KEY_LCK_EC_STAT) & KEC; if (ev_cnt) { - for (i = 0; i < ev_cnt; i++) { - key = adp5588_read(client, Key_EVENTA + i); - input_report_key(kpad->input, - kpad->keycode[(key & KEY_EV_MASK) - 1], - key & KEY_EV_PRESSED); - } + adp5588_report_events(kpad, ev_cnt); input_sync(kpad->input); } } @@ -128,8 +348,10 @@ static irqreturn_t adp5588_irq(int irq, void *handle) static int __devinit adp5588_setup(struct i2c_client *client) { - struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + const struct adp5588_gpio_platform_data *gpio_data = pdata->gpio_data; int i, ret; + unsigned char evt_mode1 = 0, evt_mode2 = 0, evt_mode3 = 0; ret = adp5588_write(client, KP_GPIO1, KP_SEL(pdata->rows)); ret |= adp5588_write(client, KP_GPIO2, KP_SEL(pdata->cols) & 0xFF); @@ -144,6 +366,32 @@ static int __devinit adp5588_setup(struct i2c_client *client) for (i = 0; i < KEYP_MAX_EVENT; i++) ret |= adp5588_read(client, Key_EVENTA); + for (i = 0; i < pdata->gpimapsize; i++) { + unsigned short pin = pdata->gpimap[i].pin; + + if (pin <= GPI_PIN_ROW_END) { + evt_mode1 |= (1 << (pin - GPI_PIN_ROW_BASE)); + } else { + evt_mode2 |= ((1 << (pin - GPI_PIN_COL_BASE)) & 0xFF); + evt_mode3 |= ((1 << (pin - GPI_PIN_COL_BASE)) >> 8); + } + } + + if (pdata->gpimapsize) { + ret |= adp5588_write(client, GPI_EM1, evt_mode1); + ret |= adp5588_write(client, GPI_EM2, evt_mode2); + ret |= adp5588_write(client, GPI_EM3, evt_mode3); + } + + if (gpio_data) { + for (i = 0; i <= ADP_BANK(MAXGPIO); i++) { + int pull_mask = gpio_data->pullup_dis_mask; + + ret |= adp5588_write(client, GPIO_PULL1 + i, + (pull_mask >> (8 * i)) & 0xFF); + } + } + ret |= adp5588_write(client, INT_STAT, CMP2_INT | CMP1_INT | OVR_FLOW_INT | K_LCK_INT | GPI_INT | KE_INT); /* Status is W1C */ @@ -158,11 +406,49 @@ static int __devinit adp5588_setup(struct i2c_client *client) return 0; } +static void __devinit adp5588_report_switch_state(struct adp5588_kpad *kpad) +{ + int gpi_stat1 = adp5588_read(kpad->client, GPIO_DAT_STAT1); + int gpi_stat2 = adp5588_read(kpad->client, GPIO_DAT_STAT2); + int gpi_stat3 = adp5588_read(kpad->client, GPIO_DAT_STAT3); + int gpi_stat_tmp, pin_loc; + int i; + + for (i = 0; i < kpad->gpimapsize; i++) { + unsigned short pin = kpad->gpimap[i].pin; + + if (pin <= GPI_PIN_ROW_END) { + gpi_stat_tmp = gpi_stat1; + pin_loc = pin - GPI_PIN_ROW_BASE; + } else if ((pin - GPI_PIN_COL_BASE) < 8) { + gpi_stat_tmp = gpi_stat2; + pin_loc = pin - GPI_PIN_COL_BASE; + } else { + gpi_stat_tmp = gpi_stat3; + pin_loc = pin - GPI_PIN_COL_BASE - 8; + } + + if (gpi_stat_tmp < 0) { + dev_err(&kpad->client->dev, + "Can't read GPIO_DAT_STAT switch %d default to OFF\n", + pin); + gpi_stat_tmp = 0; + } + + input_report_switch(kpad->input, + kpad->gpimap[i].sw_evt, + !(gpi_stat_tmp & (1 << pin_loc))); + } + + input_sync(kpad->input); +} + + static int __devinit adp5588_probe(struct i2c_client *client, const struct i2c_device_id *id) { struct adp5588_kpad *kpad; - struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; + const struct adp5588_kpad_platform_data *pdata = client->dev.platform_data; struct input_dev *input; unsigned int revid; int ret, i; @@ -189,6 +475,37 @@ static int __devinit adp5588_probe(struct i2c_client *client, return -EINVAL; } + if (!pdata->gpimap && pdata->gpimapsize) { + dev_err(&client->dev, "invalid gpimap from pdata\n"); + return -EINVAL; + } + + if (pdata->gpimapsize > ADP5588_GPIMAPSIZE_MAX) { + dev_err(&client->dev, "invalid gpimapsize\n"); + return -EINVAL; + } + + for (i = 0; i < pdata->gpimapsize; i++) { + unsigned short pin = pdata->gpimap[i].pin; + + if (pin < GPI_PIN_BASE || pin > GPI_PIN_END) { + dev_err(&client->dev, "invalid gpi pin data\n"); + return -EINVAL; + } + + if (pin <= GPI_PIN_ROW_END) { + if (pin - GPI_PIN_ROW_BASE + 1 <= pdata->rows) { + dev_err(&client->dev, "invalid gpi row data\n"); + return -EINVAL; + } + } else { + if (pin - GPI_PIN_COL_BASE + 1 <= pdata->cols) { + dev_err(&client->dev, "invalid gpi col data\n"); + return -EINVAL; + } + } + } + if (!client->irq) { dev_err(&client->dev, "no IRQ?\n"); return -EINVAL; @@ -233,6 +550,9 @@ static int __devinit adp5588_probe(struct i2c_client *client, memcpy(kpad->keycode, pdata->keymap, pdata->keymapsize * input->keycodesize); + kpad->gpimap = pdata->gpimap; + kpad->gpimapsize = pdata->gpimapsize; + /* setup input device */ __set_bit(EV_KEY, input->evbit); @@ -243,6 +563,11 @@ static int __devinit adp5588_probe(struct i2c_client *client, __set_bit(kpad->keycode[i] & KEY_MAX, input->keybit); __clear_bit(KEY_RESERVED, input->keybit); + if (kpad->gpimapsize) + __set_bit(EV_SW, input->evbit); + for (i = 0; i < kpad->gpimapsize; i++) + __set_bit(kpad->gpimap[i].sw_evt, input->swbit); + error = input_register_device(input); if (error) { dev_err(&client->dev, "unable to register input device\n"); @@ -261,6 +586,13 @@ static int __devinit adp5588_probe(struct i2c_client *client, if (error) goto err_free_irq; + if (kpad->gpimapsize) + adp5588_report_switch_state(kpad); + + error = adp5588_gpio_add(kpad); + if (error) + goto err_free_irq; + device_init_wakeup(&client->dev, 1); i2c_set_clientdata(client, kpad); @@ -287,6 +619,7 @@ static int __devexit adp5588_remove(struct i2c_client *client) free_irq(client->irq, kpad); cancel_delayed_work_sync(&kpad->work); input_unregister_device(kpad->input); + adp5588_gpio_remove(kpad); kfree(kpad); return 0; diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index b8213fd13c3f..6069abe31e42 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -31,6 +31,7 @@ struct gpio_button_data { struct input_dev *input; struct timer_list timer; struct work_struct work; + int timer_debounce; /* in msecs */ bool disabled; }; @@ -38,6 +39,8 @@ struct gpio_keys_drvdata { struct input_dev *input; struct mutex disable_lock; unsigned int n_buttons; + int (*enable)(struct device *dev); + void (*disable)(struct device *dev); struct gpio_button_data data[0]; }; @@ -109,7 +112,7 @@ static void gpio_keys_disable_button(struct gpio_button_data *bdata) * Disable IRQ and possible debouncing timer. */ disable_irq(gpio_to_irq(bdata->button->gpio)); - if (bdata->button->debounce_interval) + if (bdata->timer_debounce) del_timer_sync(&bdata->timer); bdata->disabled = true; @@ -347,9 +350,9 @@ static irqreturn_t gpio_keys_isr(int irq, void *dev_id) BUG_ON(irq != gpio_to_irq(button->gpio)); - if (button->debounce_interval) + if (bdata->timer_debounce) mod_timer(&bdata->timer, - jiffies + msecs_to_jiffies(button->debounce_interval)); + jiffies + msecs_to_jiffies(bdata->timer_debounce)); else schedule_work(&bdata->work); @@ -383,6 +386,14 @@ static int __devinit gpio_keys_setup_key(struct platform_device *pdev, goto fail3; } + if (button->debounce_interval) { + error = gpio_set_debounce(button->gpio, + button->debounce_interval * 1000); + /* use timer if gpiolib doesn't provide debounce */ + if (error < 0) + bdata->timer_debounce = button->debounce_interval; + } + irq = gpio_to_irq(button->gpio); if (irq < 0) { error = irq; @@ -414,6 +425,21 @@ fail2: return error; } +static int gpio_keys_open(struct input_dev *input) +{ + struct gpio_keys_drvdata *ddata = input_get_drvdata(input); + + return ddata->enable ? ddata->enable(input->dev.parent) : 0; +} + +static void gpio_keys_close(struct input_dev *input) +{ + struct gpio_keys_drvdata *ddata = input_get_drvdata(input); + + if (ddata->disable) + ddata->disable(input->dev.parent); +} + static int __devinit gpio_keys_probe(struct platform_device *pdev) { struct gpio_keys_platform_data *pdata = pdev->dev.platform_data; @@ -435,13 +461,18 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) ddata->input = input; ddata->n_buttons = pdata->nbuttons; + ddata->enable = pdata->enable; + ddata->disable = pdata->disable; mutex_init(&ddata->disable_lock); platform_set_drvdata(pdev, ddata); + input_set_drvdata(input, ddata); input->name = pdev->name; input->phys = "gpio-keys/input0"; input->dev.parent = &pdev->dev; + input->open = gpio_keys_open; + input->close = gpio_keys_close; input->id.bustype = BUS_HOST; input->id.vendor = 0x0001; @@ -498,7 +529,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) fail2: while (--i >= 0) { free_irq(gpio_to_irq(pdata->buttons[i].gpio), &ddata->data[i]); - if (pdata->buttons[i].debounce_interval) + if (ddata->data[i].timer_debounce) del_timer_sync(&ddata->data[i].timer); cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); @@ -526,7 +557,7 @@ static int __devexit gpio_keys_remove(struct platform_device *pdev) for (i = 0; i < pdata->nbuttons; i++) { int irq = gpio_to_irq(pdata->buttons[i].gpio); free_irq(irq, &ddata->data[i]); - if (pdata->buttons[i].debounce_interval) + if (ddata->data[i].timer_debounce) del_timer_sync(&ddata->data[i].timer); cancel_work_sync(&ddata->data[i].work); gpio_free(pdata->buttons[i].gpio); diff --git a/drivers/input/keyboard/hil_kbd.c b/drivers/input/keyboard/hil_kbd.c index c83f4b2ec7d3..dcc86b97a153 100644 --- a/drivers/input/keyboard/hil_kbd.c +++ b/drivers/input/keyboard/hil_kbd.c @@ -232,15 +232,16 @@ static void hil_dev_handle_ptr_events(struct hil_dev *ptr) if (absdev) { val = lo + (hi << 8); #ifdef TABLET_AUTOADJUST - if (val < dev->absmin[ABS_X + i]) - dev->absmin[ABS_X + i] = val; - if (val > dev->absmax[ABS_X + i]) - dev->absmax[ABS_X + i] = val; + if (val < input_abs_min(dev, ABS_X + i)) + input_abs_set_min(dev, ABS_X + i, val); + if (val > input_abs_max(dev, ABS_X + i)) + input_abs_set_max(dev, ABS_X + i, val); #endif - if (i%3) val = dev->absmax[ABS_X + i] - val; + if (i % 3) + val = input_abs_max(dev, ABS_X + i) - val; input_report_abs(dev, ABS_X + i, val); } else { - val = (int) (((int8_t)lo) | ((int8_t)hi << 8)); + val = (int) (((int8_t) lo) | ((int8_t) hi << 8)); if (i % 3) val *= -1; input_report_rel(dev, REL_X + i, val); @@ -387,9 +388,11 @@ static void hil_dev_pointer_setup(struct hil_dev *ptr) #ifdef TABLET_AUTOADJUST for (i = 0; i < ABS_MAX; i++) { - int diff = input_dev->absmax[ABS_X + i] / 10; - input_dev->absmin[ABS_X + i] += diff; - input_dev->absmax[ABS_X + i] -= diff; + int diff = input_abs_max(input_dev, ABS_X + i) / 10; + input_abs_set_min(input_dev, ABS_X + i, + input_abs_min(input_dev, ABS_X + i) + diff) + input_abs_set_max(input_dev, ABS_X + i, + input_abs_max(input_dev, ABS_X + i) - diff) } #endif diff --git a/drivers/input/keyboard/lm8323.c b/drivers/input/keyboard/lm8323.c index 40b032f0e32c..f7c2a166576b 100644 --- a/drivers/input/keyboard/lm8323.c +++ b/drivers/input/keyboard/lm8323.c @@ -642,6 +642,7 @@ static int __devinit lm8323_probe(struct i2c_client *client, struct lm8323_platform_data *pdata = client->dev.platform_data; struct input_dev *idev; struct lm8323_chip *lm; + int pwm; int i, err; unsigned long tmo; u8 data[2]; @@ -710,8 +711,9 @@ static int __devinit lm8323_probe(struct i2c_client *client, goto fail1; } - for (i = 0; i < LM8323_NUM_PWMS; i++) { - err = init_pwm(lm, i + 1, &client->dev, pdata->pwm_names[i]); + for (pwm = 0; pwm < LM8323_NUM_PWMS; pwm++) { + err = init_pwm(lm, pwm + 1, &client->dev, + pdata->pwm_names[pwm]); if (err < 0) goto fail2; } @@ -764,9 +766,9 @@ fail4: fail3: device_remove_file(&client->dev, &dev_attr_disable_kp); fail2: - while (--i >= 0) - if (lm->pwm[i].enabled) - led_classdev_unregister(&lm->pwm[i].cdev); + while (--pwm >= 0) + if (lm->pwm[pwm].enabled) + led_classdev_unregister(&lm->pwm[pwm].cdev); fail1: input_free_device(idev); kfree(lm); diff --git a/drivers/input/keyboard/matrix_keypad.c b/drivers/input/keyboard/matrix_keypad.c index b443e088fd3c..b02e4268e18f 100644 --- a/drivers/input/keyboard/matrix_keypad.c +++ b/drivers/input/keyboard/matrix_keypad.c @@ -37,6 +37,7 @@ struct matrix_keypad { spinlock_t lock; bool scan_pending; bool stopped; + bool gpio_all_disabled; }; /* @@ -87,8 +88,12 @@ static void enable_row_irqs(struct matrix_keypad *keypad) const struct matrix_keypad_platform_data *pdata = keypad->pdata; int i; - for (i = 0; i < pdata->num_row_gpios; i++) - enable_irq(gpio_to_irq(pdata->row_gpios[i])); + if (pdata->clustered_irq > 0) + enable_irq(pdata->clustered_irq); + else { + for (i = 0; i < pdata->num_row_gpios; i++) + enable_irq(gpio_to_irq(pdata->row_gpios[i])); + } } static void disable_row_irqs(struct matrix_keypad *keypad) @@ -96,8 +101,12 @@ static void disable_row_irqs(struct matrix_keypad *keypad) const struct matrix_keypad_platform_data *pdata = keypad->pdata; int i; - for (i = 0; i < pdata->num_row_gpios; i++) - disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); + if (pdata->clustered_irq > 0) + disable_irq_nosync(pdata->clustered_irq); + else { + for (i = 0; i < pdata->num_row_gpios; i++) + disable_irq_nosync(gpio_to_irq(pdata->row_gpios[i])); + } } /* @@ -216,45 +225,69 @@ static void matrix_keypad_stop(struct input_dev *dev) } #ifdef CONFIG_PM -static int matrix_keypad_suspend(struct device *dev) +static void matrix_keypad_enable_wakeup(struct matrix_keypad *keypad) { - struct platform_device *pdev = to_platform_device(dev); - struct matrix_keypad *keypad = platform_get_drvdata(pdev); const struct matrix_keypad_platform_data *pdata = keypad->pdata; + unsigned int gpio; int i; - matrix_keypad_stop(keypad->input_dev); + if (pdata->clustered_irq > 0) { + if (enable_irq_wake(pdata->clustered_irq) == 0) + keypad->gpio_all_disabled = true; + } else { - if (device_may_wakeup(&pdev->dev)) { for (i = 0; i < pdata->num_row_gpios; i++) { if (!test_bit(i, keypad->disabled_gpios)) { - unsigned int gpio = pdata->row_gpios[i]; + gpio = pdata->row_gpios[i]; if (enable_irq_wake(gpio_to_irq(gpio)) == 0) __set_bit(i, keypad->disabled_gpios); } } } - - return 0; } -static int matrix_keypad_resume(struct device *dev) +static void matrix_keypad_disable_wakeup(struct matrix_keypad *keypad) { - struct platform_device *pdev = to_platform_device(dev); - struct matrix_keypad *keypad = platform_get_drvdata(pdev); const struct matrix_keypad_platform_data *pdata = keypad->pdata; + unsigned int gpio; int i; - if (device_may_wakeup(&pdev->dev)) { + if (pdata->clustered_irq > 0) { + if (keypad->gpio_all_disabled) { + disable_irq_wake(pdata->clustered_irq); + keypad->gpio_all_disabled = false; + } + } else { for (i = 0; i < pdata->num_row_gpios; i++) { if (test_and_clear_bit(i, keypad->disabled_gpios)) { - unsigned int gpio = pdata->row_gpios[i]; - + gpio = pdata->row_gpios[i]; disable_irq_wake(gpio_to_irq(gpio)); } } } +} + +static int matrix_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + + matrix_keypad_stop(keypad->input_dev); + + if (device_may_wakeup(&pdev->dev)) + matrix_keypad_enable_wakeup(keypad); + + return 0; +} + +static int matrix_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct matrix_keypad *keypad = platform_get_drvdata(pdev); + + if (device_may_wakeup(&pdev->dev)) + matrix_keypad_disable_wakeup(keypad); matrix_keypad_start(keypad->input_dev); @@ -296,17 +329,31 @@ static int __devinit init_matrix_gpio(struct platform_device *pdev, gpio_direction_input(pdata->row_gpios[i]); } - for (i = 0; i < pdata->num_row_gpios; i++) { - err = request_irq(gpio_to_irq(pdata->row_gpios[i]), + if (pdata->clustered_irq > 0) { + err = request_irq(pdata->clustered_irq, matrix_keypad_interrupt, - IRQF_DISABLED | - IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING, + pdata->clustered_irq_flags, "matrix-keypad", keypad); if (err) { dev_err(&pdev->dev, - "Unable to acquire interrupt for GPIO line %i\n", - pdata->row_gpios[i]); - goto err_free_irqs; + "Unable to acquire clustered interrupt\n"); + goto err_free_rows; + } + } else { + for (i = 0; i < pdata->num_row_gpios; i++) { + err = request_irq(gpio_to_irq(pdata->row_gpios[i]), + matrix_keypad_interrupt, + IRQF_DISABLED | + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING, + "matrix-keypad", keypad); + if (err) { + dev_err(&pdev->dev, + "Unable to acquire interrupt " + "for GPIO line %i\n", + pdata->row_gpios[i]); + goto err_free_irqs; + } } } @@ -418,11 +465,16 @@ static int __devexit matrix_keypad_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, 0); - for (i = 0; i < pdata->num_row_gpios; i++) { - free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); - gpio_free(pdata->row_gpios[i]); + if (pdata->clustered_irq > 0) { + free_irq(pdata->clustered_irq, keypad); + } else { + for (i = 0; i < pdata->num_row_gpios; i++) + free_irq(gpio_to_irq(pdata->row_gpios[i]), keypad); } + for (i = 0; i < pdata->num_row_gpios; i++) + gpio_free(pdata->row_gpios[i]); + for (i = 0; i < pdata->num_col_gpios; i++) gpio_free(pdata->col_gpios[i]); diff --git a/drivers/input/keyboard/mcs_touchkey.c b/drivers/input/keyboard/mcs_touchkey.c new file mode 100644 index 000000000000..63b849d7e90b --- /dev/null +++ b/drivers/input/keyboard/mcs_touchkey.c @@ -0,0 +1,239 @@ +/* + * mcs_touchkey.c - Touchkey driver for MELFAS MCS5000/5080 controller + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: HeungJun Kim <riverful.kim@samsung.com> + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/i2c/mcs.h> +#include <linux/interrupt.h> +#include <linux/input.h> +#include <linux/irq.h> +#include <linux/slab.h> + +/* MCS5000 Touchkey */ +#define MCS5000_TOUCHKEY_STATUS 0x04 +#define MCS5000_TOUCHKEY_STATUS_PRESS 7 +#define MCS5000_TOUCHKEY_FW 0x0a +#define MCS5000_TOUCHKEY_BASE_VAL 0x61 + +/* MCS5080 Touchkey */ +#define MCS5080_TOUCHKEY_STATUS 0x00 +#define MCS5080_TOUCHKEY_STATUS_PRESS 3 +#define MCS5080_TOUCHKEY_FW 0x01 +#define MCS5080_TOUCHKEY_BASE_VAL 0x1 + +enum mcs_touchkey_type { + MCS5000_TOUCHKEY, + MCS5080_TOUCHKEY, +}; + +struct mcs_touchkey_chip { + unsigned int status_reg; + unsigned int pressbit; + unsigned int press_invert; + unsigned int baseval; +}; + +struct mcs_touchkey_data { + struct i2c_client *client; + struct input_dev *input_dev; + struct mcs_touchkey_chip chip; + unsigned int key_code; + unsigned int key_val; + unsigned short keycodes[]; +}; + +static irqreturn_t mcs_touchkey_interrupt(int irq, void *dev_id) +{ + struct mcs_touchkey_data *data = dev_id; + struct mcs_touchkey_chip *chip = &data->chip; + struct i2c_client *client = data->client; + struct input_dev *input = data->input_dev; + unsigned int key_val; + unsigned int pressed; + int val; + + val = i2c_smbus_read_byte_data(client, chip->status_reg); + if (val < 0) { + dev_err(&client->dev, "i2c read error [%d]\n", val); + goto out; + } + + pressed = (val & (1 << chip->pressbit)) >> chip->pressbit; + if (chip->press_invert) + pressed ^= chip->press_invert; + + /* key_val is 0 when released, so we should use key_val of press. */ + if (pressed) { + key_val = val & (0xff >> (8 - chip->pressbit)); + if (!key_val) + goto out; + key_val -= chip->baseval; + data->key_code = data->keycodes[key_val]; + data->key_val = key_val; + } + + input_event(input, EV_MSC, MSC_SCAN, data->key_val); + input_report_key(input, data->key_code, pressed); + input_sync(input); + + dev_dbg(&client->dev, "key %d %d %s\n", data->key_val, data->key_code, + pressed ? "pressed" : "released"); + + out: + return IRQ_HANDLED; +} + +static int __devinit mcs_touchkey_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + const struct mcs_platform_data *pdata; + struct mcs_touchkey_data *data; + struct input_dev *input_dev; + unsigned int fw_reg; + int fw_ver; + int error; + int i; + + pdata = client->dev.platform_data; + if (!pdata) { + dev_err(&client->dev, "no platform data defined\n"); + return -EINVAL; + } + + data = kzalloc(sizeof(struct mcs_touchkey_data) + + sizeof(data->keycodes[0]) * (pdata->key_maxval + 1), + GFP_KERNEL); + input_dev = input_allocate_device(); + if (!data || !input_dev) { + dev_err(&client->dev, "Failed to allocate memory\n"); + error = -ENOMEM; + goto err_free_mem; + } + + data->client = client; + data->input_dev = input_dev; + + if (id->driver_data == MCS5000_TOUCHKEY) { + data->chip.status_reg = MCS5000_TOUCHKEY_STATUS; + data->chip.pressbit = MCS5000_TOUCHKEY_STATUS_PRESS; + data->chip.baseval = MCS5000_TOUCHKEY_BASE_VAL; + fw_reg = MCS5000_TOUCHKEY_FW; + } else { + data->chip.status_reg = MCS5080_TOUCHKEY_STATUS; + data->chip.pressbit = MCS5080_TOUCHKEY_STATUS_PRESS; + data->chip.press_invert = 1; + data->chip.baseval = MCS5080_TOUCHKEY_BASE_VAL; + fw_reg = MCS5080_TOUCHKEY_FW; + } + + fw_ver = i2c_smbus_read_byte_data(client, fw_reg); + if (fw_ver < 0) { + error = fw_ver; + dev_err(&client->dev, "i2c read error[%d]\n", error); + goto err_free_mem; + } + dev_info(&client->dev, "Firmware version: %d\n", fw_ver); + + input_dev->name = "MELPAS MCS Touchkey"; + input_dev->id.bustype = BUS_I2C; + input_dev->dev.parent = &client->dev; + input_dev->evbit[0] = BIT_MASK(EV_KEY); + if (!pdata->no_autorepeat) + input_dev->evbit[0] |= BIT_MASK(EV_REP); + input_dev->keycode = data->keycodes; + input_dev->keycodesize = sizeof(data->keycodes[0]); + input_dev->keycodemax = pdata->key_maxval + 1; + + for (i = 0; i < pdata->keymap_size; i++) { + unsigned int val = MCS_KEY_VAL(pdata->keymap[i]); + unsigned int code = MCS_KEY_CODE(pdata->keymap[i]); + + data->keycodes[val] = code; + __set_bit(code, input_dev->keybit); + } + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + input_set_drvdata(input_dev, data); + + if (pdata->cfg_pin) + pdata->cfg_pin(); + + error = request_threaded_irq(client->irq, NULL, mcs_touchkey_interrupt, + IRQF_TRIGGER_FALLING, client->dev.driver->name, data); + if (error) { + dev_err(&client->dev, "Failed to register interrupt\n"); + goto err_free_mem; + } + + error = input_register_device(input_dev); + if (error) + goto err_free_irq; + + i2c_set_clientdata(client, data); + return 0; + +err_free_irq: + free_irq(client->irq, data); +err_free_mem: + input_free_device(input_dev); + kfree(data); + return error; +} + +static int __devexit mcs_touchkey_remove(struct i2c_client *client) +{ + struct mcs_touchkey_data *data = i2c_get_clientdata(client); + + free_irq(client->irq, data); + input_unregister_device(data->input_dev); + kfree(data); + + return 0; +} + +static const struct i2c_device_id mcs_touchkey_id[] = { + { "mcs5000_touchkey", MCS5000_TOUCHKEY }, + { "mcs5080_touchkey", MCS5080_TOUCHKEY }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mcs_touchkey_id); + +static struct i2c_driver mcs_touchkey_driver = { + .driver = { + .name = "mcs_touchkey", + .owner = THIS_MODULE, + }, + .probe = mcs_touchkey_probe, + .remove = __devexit_p(mcs_touchkey_remove), + .id_table = mcs_touchkey_id, +}; + +static int __init mcs_touchkey_init(void) +{ + return i2c_add_driver(&mcs_touchkey_driver); +} + +static void __exit mcs_touchkey_exit(void) +{ + i2c_del_driver(&mcs_touchkey_driver); +} + +module_init(mcs_touchkey_init); +module_exit(mcs_touchkey_exit); + +/* Module information */ +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); +MODULE_AUTHOR("HeungJun Kim <riverful.kim@samsung.com>"); +MODULE_DESCRIPTION("Touchkey driver for MELFAS MCS5000/5080 controller"); +MODULE_LICENSE("GPL"); diff --git a/drivers/input/keyboard/samsung-keypad.c b/drivers/input/keyboard/samsung-keypad.c new file mode 100644 index 000000000000..f689f49e3109 --- /dev/null +++ b/drivers/input/keyboard/samsung-keypad.c @@ -0,0 +1,491 @@ +/* + * Samsung keypad driver + * + * Copyright (C) 2010 Samsung Electronics Co.Ltd + * Author: Joonyoung Shim <jy0922.shim@samsung.com> + * Author: Donghwa Lee <dh09.lee@samsung.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/init.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/sched.h> +#include <plat/keypad.h> + +#define SAMSUNG_KEYIFCON 0x00 +#define SAMSUNG_KEYIFSTSCLR 0x04 +#define SAMSUNG_KEYIFCOL 0x08 +#define SAMSUNG_KEYIFROW 0x0c +#define SAMSUNG_KEYIFFC 0x10 + +/* SAMSUNG_KEYIFCON */ +#define SAMSUNG_KEYIFCON_INT_F_EN (1 << 0) +#define SAMSUNG_KEYIFCON_INT_R_EN (1 << 1) +#define SAMSUNG_KEYIFCON_DF_EN (1 << 2) +#define SAMSUNG_KEYIFCON_FC_EN (1 << 3) +#define SAMSUNG_KEYIFCON_WAKEUPEN (1 << 4) + +/* SAMSUNG_KEYIFSTSCLR */ +#define SAMSUNG_KEYIFSTSCLR_P_INT_MASK (0xff << 0) +#define SAMSUNG_KEYIFSTSCLR_R_INT_MASK (0xff << 8) +#define SAMSUNG_KEYIFSTSCLR_R_INT_OFFSET 8 +#define S5PV210_KEYIFSTSCLR_P_INT_MASK (0x3fff << 0) +#define S5PV210_KEYIFSTSCLR_R_INT_MASK (0x3fff << 16) +#define S5PV210_KEYIFSTSCLR_R_INT_OFFSET 16 + +/* SAMSUNG_KEYIFCOL */ +#define SAMSUNG_KEYIFCOL_MASK (0xff << 0) +#define S5PV210_KEYIFCOLEN_MASK (0xff << 8) + +/* SAMSUNG_KEYIFROW */ +#define SAMSUNG_KEYIFROW_MASK (0xff << 0) +#define S5PV210_KEYIFROW_MASK (0x3fff << 0) + +/* SAMSUNG_KEYIFFC */ +#define SAMSUNG_KEYIFFC_MASK (0x3ff << 0) + +enum samsung_keypad_type { + KEYPAD_TYPE_SAMSUNG, + KEYPAD_TYPE_S5PV210, +}; + +struct samsung_keypad { + struct input_dev *input_dev; + struct clk *clk; + void __iomem *base; + wait_queue_head_t wait; + bool stopped; + int irq; + unsigned int row_shift; + unsigned int rows; + unsigned int cols; + unsigned int row_state[SAMSUNG_MAX_COLS]; + unsigned short keycodes[]; +}; + +static int samsung_keypad_is_s5pv210(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + enum samsung_keypad_type type = + platform_get_device_id(pdev)->driver_data; + + return type == KEYPAD_TYPE_S5PV210; +} + +static void samsung_keypad_scan(struct samsung_keypad *keypad, + unsigned int *row_state) +{ + struct device *dev = keypad->input_dev->dev.parent; + unsigned int col; + unsigned int val; + + for (col = 0; col < keypad->cols; col++) { + if (samsung_keypad_is_s5pv210(dev)) { + val = S5PV210_KEYIFCOLEN_MASK; + val &= ~(1 << col) << 8; + } else { + val = SAMSUNG_KEYIFCOL_MASK; + val &= ~(1 << col); + } + + writel(val, keypad->base + SAMSUNG_KEYIFCOL); + mdelay(1); + + val = readl(keypad->base + SAMSUNG_KEYIFROW); + row_state[col] = ~val & ((1 << keypad->rows) - 1); + } + + /* KEYIFCOL reg clear */ + writel(0, keypad->base + SAMSUNG_KEYIFCOL); +} + +static bool samsung_keypad_report(struct samsung_keypad *keypad, + unsigned int *row_state) +{ + struct input_dev *input_dev = keypad->input_dev; + unsigned int changed; + unsigned int pressed; + unsigned int key_down = 0; + unsigned int val; + unsigned int col, row; + + for (col = 0; col < keypad->cols; col++) { + changed = row_state[col] ^ keypad->row_state[col]; + key_down |= row_state[col]; + if (!changed) + continue; + + for (row = 0; row < keypad->rows; row++) { + if (!(changed & (1 << row))) + continue; + + pressed = row_state[col] & (1 << row); + + dev_dbg(&keypad->input_dev->dev, + "key %s, row: %d, col: %d\n", + pressed ? "pressed" : "released", row, col); + + val = MATRIX_SCAN_CODE(row, col, keypad->row_shift); + + input_event(input_dev, EV_MSC, MSC_SCAN, val); + input_report_key(input_dev, + keypad->keycodes[val], pressed); + } + input_sync(keypad->input_dev); + } + + memcpy(keypad->row_state, row_state, sizeof(keypad->row_state)); + + return key_down; +} + +static irqreturn_t samsung_keypad_irq(int irq, void *dev_id) +{ + struct samsung_keypad *keypad = dev_id; + unsigned int row_state[SAMSUNG_MAX_COLS]; + unsigned int val; + bool key_down; + + do { + val = readl(keypad->base + SAMSUNG_KEYIFSTSCLR); + /* Clear interrupt. */ + writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR); + + samsung_keypad_scan(keypad, row_state); + + key_down = samsung_keypad_report(keypad, row_state); + if (key_down) + wait_event_timeout(keypad->wait, keypad->stopped, + msecs_to_jiffies(50)); + + } while (key_down && !keypad->stopped); + + return IRQ_HANDLED; +} + +static void samsung_keypad_start(struct samsung_keypad *keypad) +{ + unsigned int val; + + /* Tell IRQ thread that it may poll the device. */ + keypad->stopped = false; + + clk_enable(keypad->clk); + + /* Enable interrupt bits. */ + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val |= SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN; + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + /* KEYIFCOL reg clear. */ + writel(0, keypad->base + SAMSUNG_KEYIFCOL); +} + +static void samsung_keypad_stop(struct samsung_keypad *keypad) +{ + unsigned int val; + + /* Signal IRQ thread to stop polling and disable the handler. */ + keypad->stopped = true; + wake_up(&keypad->wait); + disable_irq(keypad->irq); + + /* Clear interrupt. */ + writel(~0x0, keypad->base + SAMSUNG_KEYIFSTSCLR); + + /* Disable interrupt bits. */ + val = readl(keypad->base + SAMSUNG_KEYIFCON); + val &= ~(SAMSUNG_KEYIFCON_INT_F_EN | SAMSUNG_KEYIFCON_INT_R_EN); + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + clk_disable(keypad->clk); + + /* + * Now that chip should not generate interrupts we can safely + * re-enable the handler. + */ + enable_irq(keypad->irq); +} + +static int samsung_keypad_open(struct input_dev *input_dev) +{ + struct samsung_keypad *keypad = input_get_drvdata(input_dev); + + samsung_keypad_start(keypad); + + return 0; +} + +static void samsung_keypad_close(struct input_dev *input_dev) +{ + struct samsung_keypad *keypad = input_get_drvdata(input_dev); + + samsung_keypad_stop(keypad); +} + +static int __devinit samsung_keypad_probe(struct platform_device *pdev) +{ + const struct samsung_keypad_platdata *pdata; + const struct matrix_keymap_data *keymap_data; + struct samsung_keypad *keypad; + struct resource *res; + struct input_dev *input_dev; + unsigned int row_shift; + unsigned int keymap_size; + int error; + + pdata = pdev->dev.platform_data; + if (!pdata) { + dev_err(&pdev->dev, "no platform data defined\n"); + return -EINVAL; + } + + keymap_data = pdata->keymap_data; + if (!keymap_data) { + dev_err(&pdev->dev, "no keymap data defined\n"); + return -EINVAL; + } + + if (!pdata->rows || pdata->rows > SAMSUNG_MAX_ROWS) + return -EINVAL; + + if (!pdata->cols || pdata->cols > SAMSUNG_MAX_COLS) + return -EINVAL; + + /* initialize the gpio */ + if (pdata->cfg_gpio) + pdata->cfg_gpio(pdata->rows, pdata->cols); + + row_shift = get_count_order(pdata->cols); + keymap_size = (pdata->rows << row_shift) * sizeof(keypad->keycodes[0]); + + keypad = kzalloc(sizeof(*keypad) + keymap_size, GFP_KERNEL); + input_dev = input_allocate_device(); + if (!keypad || !input_dev) { + error = -ENOMEM; + goto err_free_mem; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + error = -ENODEV; + goto err_free_mem; + } + + keypad->base = ioremap(res->start, resource_size(res)); + if (!keypad->base) { + error = -EBUSY; + goto err_free_mem; + } + + keypad->clk = clk_get(&pdev->dev, "keypad"); + if (IS_ERR(keypad->clk)) { + dev_err(&pdev->dev, "failed to get keypad clk\n"); + error = PTR_ERR(keypad->clk); + goto err_unmap_base; + } + + keypad->input_dev = input_dev; + keypad->row_shift = row_shift; + keypad->rows = pdata->rows; + keypad->cols = pdata->cols; + init_waitqueue_head(&keypad->wait); + + input_dev->name = pdev->name; + input_dev->id.bustype = BUS_HOST; + input_dev->dev.parent = &pdev->dev; + input_set_drvdata(input_dev, keypad); + + input_dev->open = samsung_keypad_open; + input_dev->close = samsung_keypad_close; + + input_dev->evbit[0] = BIT_MASK(EV_KEY); + if (!pdata->no_autorepeat) + input_dev->evbit[0] |= BIT_MASK(EV_REP); + + input_set_capability(input_dev, EV_MSC, MSC_SCAN); + + input_dev->keycode = keypad->keycodes; + input_dev->keycodesize = sizeof(keypad->keycodes[0]); + input_dev->keycodemax = pdata->rows << row_shift; + + matrix_keypad_build_keymap(keymap_data, row_shift, + input_dev->keycode, input_dev->keybit); + + keypad->irq = platform_get_irq(pdev, 0); + if (keypad->irq < 0) { + error = keypad->irq; + goto err_put_clk; + } + + error = request_threaded_irq(keypad->irq, NULL, samsung_keypad_irq, + IRQF_ONESHOT, dev_name(&pdev->dev), keypad); + if (error) { + dev_err(&pdev->dev, "failed to register keypad interrupt\n"); + goto err_put_clk; + } + + error = input_register_device(keypad->input_dev); + if (error) + goto err_free_irq; + + device_init_wakeup(&pdev->dev, pdata->wakeup); + platform_set_drvdata(pdev, keypad); + return 0; + +err_free_irq: + free_irq(keypad->irq, keypad); +err_put_clk: + clk_put(keypad->clk); +err_unmap_base: + iounmap(keypad->base); +err_free_mem: + input_free_device(input_dev); + kfree(keypad); + + return error; +} + +static int __devexit samsung_keypad_remove(struct platform_device *pdev) +{ + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + + device_init_wakeup(&pdev->dev, 0); + platform_set_drvdata(pdev, NULL); + + input_unregister_device(keypad->input_dev); + + /* + * It is safe to free IRQ after unregistering device because + * samsung_keypad_close will shut off interrupts. + */ + free_irq(keypad->irq, keypad); + + clk_put(keypad->clk); + + iounmap(keypad->base); + kfree(keypad); + + return 0; +} + +#ifdef CONFIG_PM +static void samsung_keypad_toggle_wakeup(struct samsung_keypad *keypad, + bool enable) +{ + struct device *dev = keypad->input_dev->dev.parent; + unsigned int val; + + clk_enable(keypad->clk); + + val = readl(keypad->base + SAMSUNG_KEYIFCON); + if (enable) { + val |= SAMSUNG_KEYIFCON_WAKEUPEN; + if (device_may_wakeup(dev)) + enable_irq_wake(keypad->irq); + } else { + val &= ~SAMSUNG_KEYIFCON_WAKEUPEN; + if (device_may_wakeup(dev)) + disable_irq_wake(keypad->irq); + } + writel(val, keypad->base + SAMSUNG_KEYIFCON); + + clk_disable(keypad->clk); +} + +static int samsung_keypad_suspend(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + if (input_dev->users) + samsung_keypad_stop(keypad); + + samsung_keypad_toggle_wakeup(keypad, true); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static int samsung_keypad_resume(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct samsung_keypad *keypad = platform_get_drvdata(pdev); + struct input_dev *input_dev = keypad->input_dev; + + mutex_lock(&input_dev->mutex); + + samsung_keypad_toggle_wakeup(keypad, false); + + if (input_dev->users) + samsung_keypad_start(keypad); + + mutex_unlock(&input_dev->mutex); + + return 0; +} + +static const struct dev_pm_ops samsung_keypad_pm_ops = { + .suspend = samsung_keypad_suspend, + .resume = samsung_keypad_resume, +}; +#endif + +static struct platform_device_id samsung_keypad_driver_ids[] = { + { + .name = "samsung-keypad", + .driver_data = KEYPAD_TYPE_SAMSUNG, + }, { + .name = "s5pv210-keypad", + .driver_data = KEYPAD_TYPE_S5PV210, + }, + { }, +}; +MODULE_DEVICE_TABLE(platform, samsung_keypad_driver_ids); + +static struct platform_driver samsung_keypad_driver = { + .probe = samsung_keypad_probe, + .remove = __devexit_p(samsung_keypad_remove), + .driver = { + .name = "samsung-keypad", + .owner = THIS_MODULE, +#ifdef CONFIG_PM + .pm = &samsung_keypad_pm_ops, +#endif + }, + .id_table = samsung_keypad_driver_ids, +}; + +static int __init samsung_keypad_init(void) +{ + return platform_driver_register(&samsung_keypad_driver); +} +module_init(samsung_keypad_init); + +static void __exit samsung_keypad_exit(void) +{ + platform_driver_unregister(&samsung_keypad_driver); +} +module_exit(samsung_keypad_exit); + +MODULE_DESCRIPTION("Samsung keypad driver"); +MODULE_AUTHOR("Joonyoung Shim <jy0922.shim@samsung.com>"); +MODULE_AUTHOR("Donghwa Lee <dh09.lee@samsung.com>"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:samsung-keypad"); diff --git a/drivers/input/keyboard/stmpe-keypad.c b/drivers/input/keyboard/stmpe-keypad.c new file mode 100644 index 000000000000..ab7610ca10eb --- /dev/null +++ b/drivers/input/keyboard/stmpe-keypad.c @@ -0,0 +1,386 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License, version 2 + * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/input/matrix_keypad.h> +#include <linux/mfd/stmpe.h> + +/* These are at the same addresses in all STMPE variants */ +#define STMPE_KPC_COL 0x60 +#define STMPE_KPC_ROW_MSB 0x61 +#define STMPE_KPC_ROW_LSB 0x62 +#define STMPE_KPC_CTRL_MSB 0x63 +#define STMPE_KPC_CTRL_LSB 0x64 +#define STMPE_KPC_COMBI_KEY_0 0x65 +#define STMPE_KPC_COMBI_KEY_1 0x66 +#define STMPE_KPC_COMBI_KEY_2 0x67 +#define STMPE_KPC_DATA_BYTE0 0x68 +#define STMPE_KPC_DATA_BYTE1 0x69 +#define STMPE_KPC_DATA_BYTE2 0x6a +#define STMPE_KPC_DATA_BYTE3 0x6b +#define STMPE_KPC_DATA_BYTE4 0x6c + +#define STMPE_KPC_CTRL_LSB_SCAN (0x1 << 0) +#define STMPE_KPC_CTRL_LSB_DEBOUNCE (0x7f << 1) +#define STMPE_KPC_CTRL_MSB_SCAN_COUNT (0xf << 4) + +#define STMPE_KPC_ROW_MSB_ROWS 0xff + +#define STMPE_KPC_DATA_UP (0x1 << 7) +#define STMPE_KPC_DATA_ROW (0xf << 3) +#define STMPE_KPC_DATA_COL (0x7 << 0) +#define STMPE_KPC_DATA_NOKEY_MASK 0x78 + +#define STMPE_KEYPAD_MAX_DEBOUNCE 127 +#define STMPE_KEYPAD_MAX_SCAN_COUNT 15 + +#define STMPE_KEYPAD_MAX_ROWS 8 +#define STMPE_KEYPAD_MAX_COLS 8 +#define STMPE_KEYPAD_ROW_SHIFT 3 +#define STMPE_KEYPAD_KEYMAP_SIZE \ + (STMPE_KEYPAD_MAX_ROWS * STMPE_KEYPAD_MAX_COLS) + +/** + * struct stmpe_keypad_variant - model-specific attributes + * @auto_increment: whether the KPC_DATA_BYTE register address + * auto-increments on multiple read + * @num_data: number of data bytes + * @num_normal_data: number of normal keys' data bytes + * @max_cols: maximum number of columns supported + * @max_rows: maximum number of rows supported + * @col_gpios: bitmask of gpios which can be used for columns + * @row_gpios: bitmask of gpios which can be used for rows + */ +struct stmpe_keypad_variant { + bool auto_increment; + int num_data; + int num_normal_data; + int max_cols; + int max_rows; + unsigned int col_gpios; + unsigned int row_gpios; +}; + +static const struct stmpe_keypad_variant stmpe_keypad_variants[] = { + [STMPE1601] = { + .auto_increment = true, + .num_data = 5, + .num_normal_data = 3, + .max_cols = 8, + .max_rows = 8, + .col_gpios = 0x000ff, /* GPIO 0 - 7 */ + .row_gpios = 0x0ff00, /* GPIO 8 - 15 */ + }, + [STMPE2401] = { + .auto_increment = false, + .num_data = 3, + .num_normal_data = 2, + .max_cols = 8, + .max_rows = 12, + .col_gpios = 0x0000ff, /* GPIO 0 - 7*/ + .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */ + }, + [STMPE2403] = { + .auto_increment = true, + .num_data = 5, + .num_normal_data = 3, + .max_cols = 8, + .max_rows = 12, + .col_gpios = 0x0000ff, /* GPIO 0 - 7*/ + .row_gpios = 0x1fef00, /* GPIO 8-14, 16-20 */ + }, +}; + +struct stmpe_keypad { + struct stmpe *stmpe; + struct input_dev *input; + const struct stmpe_keypad_variant *variant; + const struct stmpe_keypad_platform_data *plat; + + unsigned int rows; + unsigned int cols; + + unsigned short keymap[STMPE_KEYPAD_KEYMAP_SIZE]; +}; + +static int stmpe_keypad_read_data(struct stmpe_keypad *keypad, u8 *data) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + struct stmpe *stmpe = keypad->stmpe; + int ret; + int i; + + if (variant->auto_increment) + return stmpe_block_read(stmpe, STMPE_KPC_DATA_BYTE0, + variant->num_data, data); + + for (i = 0; i < variant->num_data; i++) { + ret = stmpe_reg_read(stmpe, STMPE_KPC_DATA_BYTE0 + i); + if (ret < 0) + return ret; + + data[i] = ret; + } + + return 0; +} + +static irqreturn_t stmpe_keypad_irq(int irq, void *dev) +{ + struct stmpe_keypad *keypad = dev; + struct input_dev *input = keypad->input; + const struct stmpe_keypad_variant *variant = keypad->variant; + u8 fifo[variant->num_data]; + int ret; + int i; + + ret = stmpe_keypad_read_data(keypad, fifo); + if (ret < 0) + return IRQ_NONE; + + for (i = 0; i < variant->num_normal_data; i++) { + u8 data = fifo[i]; + int row = (data & STMPE_KPC_DATA_ROW) >> 3; + int col = data & STMPE_KPC_DATA_COL; + int code = MATRIX_SCAN_CODE(row, col, STMPE_KEYPAD_ROW_SHIFT); + bool up = data & STMPE_KPC_DATA_UP; + + if ((data & STMPE_KPC_DATA_NOKEY_MASK) + == STMPE_KPC_DATA_NOKEY_MASK) + continue; + + input_event(input, EV_MSC, MSC_SCAN, code); + input_report_key(input, keypad->keymap[code], !up); + input_sync(input); + } + + return IRQ_HANDLED; +} + +static int __devinit stmpe_keypad_altfunc_init(struct stmpe_keypad *keypad) +{ + const struct stmpe_keypad_variant *variant = keypad->variant; + unsigned int col_gpios = variant->col_gpios; + unsigned int row_gpios = variant->row_gpios; + struct stmpe *stmpe = keypad->stmpe; + unsigned int pins = 0; + int i; + + /* + * Figure out which pins need to be set to the keypad alternate + * function. + * + * {cols,rows}_gpios are bitmasks of which pins on the chip can be used + * for the keypad. + * + * keypad->{cols,rows} are a bitmask of which pins (of the ones useable + * for the keypad) are used on the board. + */ + + for (i = 0; i < variant->max_cols; i++) { + int num = __ffs(col_gpios); + + if (keypad->cols & (1 << i)) + pins |= 1 << num; + + col_gpios &= ~(1 << num); + } + + for (i = 0; i < variant->max_rows; i++) { + int num = __ffs(row_gpios); + + if (keypad->rows & (1 << i)) + pins |= 1 << num; + + row_gpios &= ~(1 << num); + } + + return stmpe_set_altfunc(stmpe, pins, STMPE_BLOCK_KEYPAD); +} + +static int __devinit stmpe_keypad_chip_init(struct stmpe_keypad *keypad) +{ + const struct stmpe_keypad_platform_data *plat = keypad->plat; + const struct stmpe_keypad_variant *variant = keypad->variant; + struct stmpe *stmpe = keypad->stmpe; + int ret; + + if (plat->debounce_ms > STMPE_KEYPAD_MAX_DEBOUNCE) + return -EINVAL; + + if (plat->scan_count > STMPE_KEYPAD_MAX_SCAN_COUNT) + return -EINVAL; + + ret = stmpe_enable(stmpe, STMPE_BLOCK_KEYPAD); + if (ret < 0) + return ret; + + ret = stmpe_keypad_altfunc_init(keypad); + if (ret < 0) + return ret; + + ret = stmpe_reg_write(stmpe, STMPE_KPC_COL, keypad->cols); + if (ret < 0) + return ret; + + ret = stmpe_reg_write(stmpe, STMPE_KPC_ROW_LSB, keypad->rows); + if (ret < 0) + return ret; + + if (variant->max_rows > 8) { + ret = stmpe_set_bits(stmpe, STMPE_KPC_ROW_MSB, + STMPE_KPC_ROW_MSB_ROWS, + keypad->rows >> 8); + if (ret < 0) + return ret; + } + + ret = stmpe_set_bits(stmpe, STMPE_KPC_CTRL_MSB, + STMPE_KPC_CTRL_MSB_SCAN_COUNT, + plat->scan_count << 4); + if (ret < 0) + return ret; + + return stmpe_set_bits(stmpe, STMPE_KPC_CTRL_LSB, + STMPE_KPC_CTRL_LSB_SCAN | + STMPE_KPC_CTRL_LSB_DEBOUNCE, + STMPE_KPC_CTRL_LSB_SCAN | + (plat->debounce_ms << 1)); +} + +static int __devinit stmpe_keypad_probe(struct platform_device *pdev) +{ + struct stmpe *stmpe = dev_get_drvdata(pdev->dev.parent); + struct stmpe_keypad_platform_data *plat; + struct stmpe_keypad *keypad; + struct input_dev *input; + int ret; + int irq; + int i; + + plat = stmpe->pdata->keypad; + if (!plat) + return -ENODEV; + + irq = platform_get_irq(pdev, 0); + if (irq < 0) + return irq; + + keypad = kzalloc(sizeof(struct stmpe_keypad), GFP_KERNEL); + if (!keypad) + return -ENOMEM; + + input = input_allocate_device(); + if (!input) { + ret = -ENOMEM; + goto out_freekeypad; + } + + input->name = "STMPE keypad"; + input->id.bustype = BUS_I2C; + input->dev.parent = &pdev->dev; + + input_set_capability(input, EV_MSC, MSC_SCAN); + + __set_bit(EV_KEY, input->evbit); + if (!plat->no_autorepeat) + __set_bit(EV_REP, input->evbit); + + input->keycode = keypad->keymap; + input->keycodesize = sizeof(keypad->keymap[0]); + input->keycodemax = ARRAY_SIZE(keypad->keymap); + + matrix_keypad_build_keymap(plat->keymap_data, STMPE_KEYPAD_ROW_SHIFT, + input->keycode, input->keybit); + + for (i = 0; i < plat->keymap_data->keymap_size; i++) { + unsigned int key = plat->keymap_data->keymap[i]; + + keypad->cols |= 1 << KEY_COL(key); + keypad->rows |= 1 << KEY_ROW(key); + } + + keypad->stmpe = stmpe; + keypad->plat = plat; + keypad->input = input; + keypad->variant = &stmpe_keypad_variants[stmpe->partnum]; + + ret = stmpe_keypad_chip_init(keypad); + if (ret < 0) + goto out_freeinput; + + ret = input_register_device(input); + if (ret) { + dev_err(&pdev->dev, + "unable to register input device: %d\n", ret); + goto out_freeinput; + } + + ret = request_threaded_irq(irq, NULL, stmpe_keypad_irq, IRQF_ONESHOT, + "stmpe-keypad", keypad); + if (ret) { + dev_err(&pdev->dev, "unable to get irq: %d\n", ret); + goto out_unregisterinput; + } + + platform_set_drvdata(pdev, keypad); + + return 0; + +out_unregisterinput: + input_unregister_device(input); + input = NULL; +out_freeinput: + input_free_device(input); +out_freekeypad: + kfree(keypad); + return ret; +} + +static int __devexit stmpe_keypad_remove(struct platform_device *pdev) +{ + struct stmpe_keypad *keypad = platform_get_drvdata(pdev); + struct stmpe *stmpe = keypad->stmpe; + int irq = platform_get_irq(pdev, 0); + + stmpe_disable(stmpe, STMPE_BLOCK_KEYPAD); + + free_irq(irq, keypad); + input_unregister_device(keypad->input); + platform_set_drvdata(pdev, NULL); + kfree(keypad); + + return 0; +} + +static struct platform_driver stmpe_keypad_driver = { + .driver.name = "stmpe-keypad", + .driver.owner = THIS_MODULE, + .probe = stmpe_keypad_probe, + .remove = __devexit_p(stmpe_keypad_remove), +}; + +static int __init stmpe_keypad_init(void) +{ + return platform_driver_register(&stmpe_keypad_driver); +} +module_init(stmpe_keypad_init); + +static void __exit stmpe_keypad_exit(void) +{ + platform_driver_unregister(&stmpe_keypad_driver); +} +module_exit(stmpe_keypad_exit); + +MODULE_LICENSE("GPL v2"); +MODULE_DESCRIPTION("STMPExxxx keypad driver"); +MODULE_AUTHOR("Rabin Vincent <rabin.vincent@stericsson.com>"); |