diff options
Diffstat (limited to 'drivers/input/mouse/elantech.c')
| -rw-r--r-- | drivers/input/mouse/elantech.c | 32 |
1 files changed, 28 insertions, 4 deletions
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c index 6e22682c8255..ce3d40004458 100644 --- a/drivers/input/mouse/elantech.c +++ b/drivers/input/mouse/elantech.c @@ -315,7 +315,7 @@ static void elantech_report_semi_mt_data(struct input_dev *dev, unsigned int x2, unsigned int y2) { elantech_set_slot(dev, 0, num_fingers != 0, x1, y1); - elantech_set_slot(dev, 1, num_fingers == 2, x2, y2); + elantech_set_slot(dev, 1, num_fingers >= 2, x2, y2); } /* @@ -893,6 +893,21 @@ static psmouse_ret_t elantech_process_byte(struct psmouse *psmouse) } /* + * This writes the reg_07 value again to the hardware at the end of every + * set_rate call because the register loses its value. reg_07 allows setting + * absolute mode on v4 hardware + */ +static void elantech_set_rate_restore_reg_07(struct psmouse *psmouse, + unsigned int rate) +{ + struct elantech_data *etd = psmouse->private; + + etd->original_set_rate(psmouse, rate); + if (elantech_write_reg(psmouse, 0x07, etd->reg_07)) + psmouse_err(psmouse, "restoring reg_07 failed\n"); +} + +/* * Put the touchpad into absolute mode */ static int elantech_set_absolute_mode(struct psmouse *psmouse) @@ -1094,6 +1109,8 @@ static int elantech_get_resolution_v4(struct psmouse *psmouse, * Asus K53SV 0x450f01 78, 15, 0c 2 hw buttons * Asus G46VW 0x460f02 00, 18, 0c 2 hw buttons * Asus G750JX 0x360f00 00, 16, 0c 2 hw buttons + * Asus TP500LN 0x381f17 10, 14, 0e clickpad + * Asus X750JN 0x381f17 10, 14, 0e clickpad * Asus UX31 0x361f00 20, 15, 0e clickpad * Asus UX32VD 0x361f02 00, 15, 0e clickpad * Avatar AVIU-145A2 0x361f00 ? clickpad @@ -1359,10 +1376,11 @@ static bool elantech_is_signature_valid(const unsigned char *param) return true; /* - * Some models have a revision higher then 20. Meaning param[2] may - * be 10 or 20, skip the rates check for these. + * Some hw_version >= 4 models have a revision higher then 20. Meaning + * that param[2] may be 10 or 20, skip the rates check for these. */ - if (param[0] == 0x46 && (param[1] & 0xef) == 0x0f && param[2] < 40) + if ((param[0] & 0x0f) >= 0x06 && (param[1] & 0xaf) == 0x0f && + param[2] < 40) return true; for (i = 0; i < ARRAY_SIZE(rates); i++) @@ -1538,6 +1556,7 @@ static int elantech_set_properties(struct elantech_data *etd) case 9: case 10: case 13: + case 14: etd->hw_version = 4; break; default: @@ -1635,6 +1654,11 @@ int elantech_init(struct psmouse *psmouse) goto init_fail; } + if (etd->fw_version == 0x381f17) { + etd->original_set_rate = psmouse->set_rate; + psmouse->set_rate = elantech_set_rate_restore_reg_07; + } + if (elantech_set_input_params(psmouse)) { psmouse_err(psmouse, "failed to query touchpad range.\n"); goto init_fail; |