diff options
Diffstat (limited to 'drivers/input/touchscreen')
-rw-r--r-- | drivers/input/touchscreen/88pm860x-ts.c | 127 | ||||
-rw-r--r-- | drivers/input/touchscreen/Kconfig | 2 | ||||
-rw-r--r-- | drivers/input/touchscreen/atmel_mxt_ts.c | 6 | ||||
-rw-r--r-- | drivers/input/touchscreen/egalax_ts.c | 23 | ||||
-rw-r--r-- | drivers/input/touchscreen/s3c2410_ts.c | 4 | ||||
-rw-r--r-- | drivers/input/touchscreen/tsc40.c | 1 | ||||
-rw-r--r-- | drivers/input/touchscreen/wm831x-ts.c | 2 |
7 files changed, 138 insertions, 27 deletions
diff --git a/drivers/input/touchscreen/88pm860x-ts.c b/drivers/input/touchscreen/88pm860x-ts.c index 05f30b73c3c3..326218dbd6e6 100644 --- a/drivers/input/touchscreen/88pm860x-ts.c +++ b/drivers/input/touchscreen/88pm860x-ts.c @@ -10,6 +10,7 @@ */ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/of.h> #include <linux/platform_device.h> #include <linux/i2c.h> #include <linux/input.h> @@ -113,14 +114,69 @@ static void pm860x_touch_close(struct input_dev *dev) pm860x_set_bits(touch->i2c, MEAS_EN3, data, 0); } +#ifdef CONFIG_OF +static int __devinit pm860x_touch_dt_init(struct platform_device *pdev, + struct pm860x_chip *chip, + int *res_x) +{ + struct device_node *np = pdev->dev.parent->of_node; + struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \ + : chip->companion; + int data, n, ret; + if (!np) + return -ENODEV; + np = of_find_node_by_name(np, "touch"); + if (!np) { + dev_err(&pdev->dev, "Can't find touch node\n"); + return -EINVAL; + } + /* set GPADC MISC1 register */ + data = 0; + if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-prebias", &n)) + data |= (n << 1) & PM8607_GPADC_PREBIAS_MASK; + if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-slot-cycle", &n)) + data |= (n << 3) & PM8607_GPADC_SLOT_CYCLE_MASK; + if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-off-scale", &n)) + data |= (n << 5) & PM8607_GPADC_OFF_SCALE_MASK; + if (!of_property_read_u32(np, "marvell,88pm860x-gpadc-sw-cal", &n)) + data |= (n << 7) & PM8607_GPADC_SW_CAL_MASK; + if (data) { + ret = pm860x_reg_write(i2c, PM8607_GPADC_MISC1, data); + if (ret < 0) + return -EINVAL; + } + /* set tsi prebias time */ + if (!of_property_read_u32(np, "marvell,88pm860x-tsi-prebias", &data)) { + ret = pm860x_reg_write(i2c, PM8607_TSI_PREBIAS, data); + if (ret < 0) + return -EINVAL; + } + /* set prebias & prechg time of pen detect */ + data = 0; + if (!of_property_read_u32(np, "marvell,88pm860x-pen-prebias", &n)) + data |= n & PM8607_PD_PREBIAS_MASK; + if (!of_property_read_u32(np, "marvell,88pm860x-pen-prechg", &n)) + data |= n & PM8607_PD_PRECHG_MASK; + if (data) { + ret = pm860x_reg_write(i2c, PM8607_PD_PREBIAS, data); + if (ret < 0) + return -EINVAL; + } + of_property_read_u32(np, "marvell,88pm860x-resistor-X", res_x); + return 0; +} +#else +#define pm860x_touch_dt_init(x, y, z) (-1) +#endif + static int __devinit pm860x_touch_probe(struct platform_device *pdev) { struct pm860x_chip *chip = dev_get_drvdata(pdev->dev.parent); - struct pm860x_platform_data *pm860x_pdata = \ - pdev->dev.parent->platform_data; - struct pm860x_touch_pdata *pdata = NULL; + struct pm860x_touch_pdata *pdata = pdev->dev.platform_data; struct pm860x_touch *touch; - int irq, ret; + struct i2c_client *i2c = (chip->id == CHIP_PM8607) ? chip->client \ + : chip->companion; + int irq, ret, res_x = 0, data = 0; irq = platform_get_irq(pdev, 0); if (irq < 0) { @@ -128,16 +184,55 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev) return -EINVAL; } - if (!pm860x_pdata) { - dev_err(&pdev->dev, "platform data is missing\n"); - return -EINVAL; - } - - pdata = pm860x_pdata->touch; - if (!pdata) { - dev_err(&pdev->dev, "touchscreen data is missing\n"); - return -EINVAL; + if (pm860x_touch_dt_init(pdev, chip, &res_x)) { + if (pdata) { + /* set GPADC MISC1 register */ + data = 0; + data |= (pdata->gpadc_prebias << 1) + & PM8607_GPADC_PREBIAS_MASK; + data |= (pdata->slot_cycle << 3) + & PM8607_GPADC_SLOT_CYCLE_MASK; + data |= (pdata->off_scale << 5) + & PM8607_GPADC_OFF_SCALE_MASK; + data |= (pdata->sw_cal << 7) + & PM8607_GPADC_SW_CAL_MASK; + if (data) { + ret = pm860x_reg_write(i2c, + PM8607_GPADC_MISC1, data); + if (ret < 0) + return -EINVAL; + } + /* set tsi prebias time */ + if (pdata->tsi_prebias) { + data = pdata->tsi_prebias; + ret = pm860x_reg_write(i2c, + PM8607_TSI_PREBIAS, data); + if (ret < 0) + return -EINVAL; + } + /* set prebias & prechg time of pen detect */ + data = 0; + data |= pdata->pen_prebias + & PM8607_PD_PREBIAS_MASK; + data |= (pdata->pen_prechg << 5) + & PM8607_PD_PRECHG_MASK; + if (data) { + ret = pm860x_reg_write(i2c, + PM8607_PD_PREBIAS, data); + if (ret < 0) + return -EINVAL; + } + res_x = pdata->res_x; + } else { + dev_err(&pdev->dev, "failed to get platform data\n"); + return -EINVAL; + } } + /* enable GPADC */ + ret = pm860x_set_bits(i2c, PM8607_GPADC_MISC1, PM8607_GPADC_EN, + PM8607_GPADC_EN); + if (ret) + return ret; touch = kzalloc(sizeof(struct pm860x_touch), GFP_KERNEL); if (touch == NULL) @@ -158,9 +253,9 @@ static int __devinit pm860x_touch_probe(struct platform_device *pdev) touch->idev->open = pm860x_touch_open; touch->idev->close = pm860x_touch_close; touch->chip = chip; - touch->i2c = (chip->id == CHIP_PM8607) ? chip->client : chip->companion; - touch->irq = irq + chip->irq_base; - touch->res_x = pdata->res_x; + touch->i2c = i2c; + touch->irq = irq; + touch->res_x = res_x; input_set_drvdata(touch->idev, touch); ret = request_threaded_irq(touch->irq, NULL, pm860x_touch_handler, diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 1ba232cbc09d..f7668b24c378 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -239,7 +239,7 @@ config TOUCHSCREEN_EETI config TOUCHSCREEN_EGALAX tristate "EETI eGalax multi-touch panel support" - depends on I2C + depends on I2C && OF help Say Y here to enable support for I2C connected EETI eGalax multi-touch panels. diff --git a/drivers/input/touchscreen/atmel_mxt_ts.c b/drivers/input/touchscreen/atmel_mxt_ts.c index e92615d0b1b0..1df2396af008 100644 --- a/drivers/input/touchscreen/atmel_mxt_ts.c +++ b/drivers/input/touchscreen/atmel_mxt_ts.c @@ -320,10 +320,8 @@ static bool mxt_object_writable(unsigned int type) static void mxt_dump_message(struct device *dev, struct mxt_message *message) { - dev_dbg(dev, "reportid: %u\tmessage: %02x %02x %02x %02x %02x %02x %02x\n", - message->reportid, message->message[0], message->message[1], - message->message[2], message->message[3], message->message[4], - message->message[5], message->message[6]); + dev_dbg(dev, "reportid: %u\tmessage: %*ph\n", + message->reportid, 7, message->message); } static int mxt_check_bootloader(struct i2c_client *client, diff --git a/drivers/input/touchscreen/egalax_ts.c b/drivers/input/touchscreen/egalax_ts.c index c1e3460f1195..13fa62fdfb0b 100644 --- a/drivers/input/touchscreen/egalax_ts.c +++ b/drivers/input/touchscreen/egalax_ts.c @@ -28,6 +28,7 @@ #include <linux/slab.h> #include <linux/bitops.h> #include <linux/input/mt.h> +#include <linux/of_gpio.h> /* * Mouse Mode: some panel may configure the controller to mouse mode, @@ -122,9 +123,17 @@ static irqreturn_t egalax_ts_interrupt(int irq, void *dev_id) /* wake up controller by an falling edge of interrupt gpio. */ static int egalax_wake_up_device(struct i2c_client *client) { - int gpio = irq_to_gpio(client->irq); + struct device_node *np = client->dev.of_node; + int gpio; int ret; + if (!np) + return -ENODEV; + + gpio = of_get_named_gpio(np, "wakeup-gpios", 0); + if (!gpio_is_valid(gpio)) + return -ENODEV; + ret = gpio_request(gpio, "egalax_irq"); if (ret < 0) { dev_err(&client->dev, @@ -181,7 +190,11 @@ static int __devinit egalax_ts_probe(struct i2c_client *client, ts->input_dev = input_dev; /* controller may be in sleep, wake it up. */ - egalax_wake_up_device(client); + error = egalax_wake_up_device(client); + if (error) { + dev_err(&client->dev, "Failed to wake up the controller\n"); + goto err_free_dev; + } ret = egalax_firmware_version(client); if (ret < 0) { @@ -274,11 +287,17 @@ static int egalax_ts_resume(struct device *dev) static SIMPLE_DEV_PM_OPS(egalax_ts_pm_ops, egalax_ts_suspend, egalax_ts_resume); +static struct of_device_id egalax_ts_dt_ids[] = { + { .compatible = "eeti,egalax_ts" }, + { /* sentinel */ } +}; + static struct i2c_driver egalax_ts_driver = { .driver = { .name = "egalax_ts", .owner = THIS_MODULE, .pm = &egalax_ts_pm_ops, + .of_match_table = of_match_ptr(egalax_ts_dt_ids), }, .id_table = egalax_ts_id, .probe = egalax_ts_probe, diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c index bf1a06400067..549fa29548f8 100644 --- a/drivers/input/touchscreen/s3c2410_ts.c +++ b/drivers/input/touchscreen/s3c2410_ts.c @@ -37,7 +37,7 @@ #include <plat/adc.h> #include <plat/regs-adc.h> -#include <plat/ts.h> +#include <linux/platform_data/touchscreen-s3c2410.h> #define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0)) @@ -406,7 +406,7 @@ static int s3c2410ts_resume(struct device *dev) return 0; } -static struct dev_pm_ops s3c_ts_pmops = { +static const struct dev_pm_ops s3c_ts_pmops = { .suspend = s3c2410ts_suspend, .resume = s3c2410ts_resume, }; diff --git a/drivers/input/touchscreen/tsc40.c b/drivers/input/touchscreen/tsc40.c index 63209aaa55f0..eb96f168fb9d 100644 --- a/drivers/input/touchscreen/tsc40.c +++ b/drivers/input/touchscreen/tsc40.c @@ -107,7 +107,6 @@ static int tsc_connect(struct serio *serio, struct serio_driver *drv) __set_bit(BTN_TOUCH, input_dev->keybit); input_set_abs_params(ptsc->dev, ABS_X, 0, 0x3ff, 0, 0); input_set_abs_params(ptsc->dev, ABS_Y, 0, 0x3ff, 0, 0); - input_set_abs_params(ptsc->dev, ABS_PRESSURE, 0, 0, 0, 0); serio_set_drvdata(serio, ptsc); diff --git a/drivers/input/touchscreen/wm831x-ts.c b/drivers/input/touchscreen/wm831x-ts.c index e83410721e38..52abb98a8ae5 100644 --- a/drivers/input/touchscreen/wm831x-ts.c +++ b/drivers/input/touchscreen/wm831x-ts.c @@ -221,7 +221,7 @@ static void wm831x_ts_input_close(struct input_dev *idev) synchronize_irq(wm831x_ts->pd_irq); /* Make sure the IRQ completion work is quiesced */ - flush_work_sync(&wm831x_ts->pd_data_work); + flush_work(&wm831x_ts->pd_data_work); /* If we ended up with the pen down then make sure we revert back * to pen detection state for the next time we start up. |