diff options
Diffstat (limited to 'drivers/irqchip/irq-metag.c')
| -rw-r--r-- | drivers/irqchip/irq-metag.c | 343 |
1 files changed, 0 insertions, 343 deletions
diff --git a/drivers/irqchip/irq-metag.c b/drivers/irqchip/irq-metag.c deleted file mode 100644 index 857b946747eb..000000000000 --- a/drivers/irqchip/irq-metag.c +++ /dev/null @@ -1,343 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Meta internal (HWSTATMETA) interrupt code. - * - * Copyright (C) 2011-2012 Imagination Technologies Ltd. - * - * This code is based on the code in SoC/common/irq.c and SoC/comet/irq.c - * The code base could be generalised/merged as a lot of the functionality is - * similar. Until this is done, we try to keep the code simple here. - */ - -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/irqdomain.h> - -#include <asm/irq.h> -#include <asm/hwthread.h> - -#define PERF0VECINT 0x04820580 -#define PERF1VECINT 0x04820588 -#define PERF0TRIG_OFFSET 16 -#define PERF1TRIG_OFFSET 17 - -/** - * struct metag_internal_irq_priv - private meta internal interrupt data - * @domain: IRQ domain for all internal Meta IRQs (HWSTATMETA) - * @unmasked: Record of unmasked IRQs - */ -struct metag_internal_irq_priv { - struct irq_domain *domain; - - unsigned long unmasked; -}; - -/* Private data for the one and only internal interrupt controller */ -static struct metag_internal_irq_priv metag_internal_irq_priv; - -static unsigned int metag_internal_irq_startup(struct irq_data *data); -static void metag_internal_irq_shutdown(struct irq_data *data); -static void metag_internal_irq_ack(struct irq_data *data); -static void metag_internal_irq_mask(struct irq_data *data); -static void metag_internal_irq_unmask(struct irq_data *data); -#ifdef CONFIG_SMP -static int metag_internal_irq_set_affinity(struct irq_data *data, - const struct cpumask *cpumask, bool force); -#endif - -static struct irq_chip internal_irq_edge_chip = { - .name = "HWSTATMETA-IRQ", - .irq_startup = metag_internal_irq_startup, - .irq_shutdown = metag_internal_irq_shutdown, - .irq_ack = metag_internal_irq_ack, - .irq_mask = metag_internal_irq_mask, - .irq_unmask = metag_internal_irq_unmask, -#ifdef CONFIG_SMP - .irq_set_affinity = metag_internal_irq_set_affinity, -#endif -}; - -/* - * metag_hwvec_addr - get the address of *VECINT regs of irq - * - * This function is a table of supported triggers on HWSTATMETA - * Could do with a structure, but better keep it simple. Changes - * in this code should be rare. - */ -static inline void __iomem *metag_hwvec_addr(irq_hw_number_t hw) -{ - void __iomem *addr; - - switch (hw) { - case PERF0TRIG_OFFSET: - addr = (void __iomem *)PERF0VECINT; - break; - case PERF1TRIG_OFFSET: - addr = (void __iomem *)PERF1VECINT; - break; - default: - addr = NULL; - break; - } - return addr; -} - -/* - * metag_internal_startup - setup an internal irq - * @irq: the irq to startup - * - * Multiplex interrupts for @irq onto TR1. Clear any pending - * interrupts. - */ -static unsigned int metag_internal_irq_startup(struct irq_data *data) -{ - /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */ - metag_internal_irq_ack(data); - - /* Enable the interrupt by unmasking it */ - metag_internal_irq_unmask(data); - - return 0; -} - -/* - * metag_internal_irq_shutdown - turn off the irq - * @irq: the irq number to turn off - * - * Mask @irq and clear any pending interrupts. - * Stop muxing @irq onto TR1. - */ -static void metag_internal_irq_shutdown(struct irq_data *data) -{ - /* Disable the IRQ at the core by masking it. */ - metag_internal_irq_mask(data); - - /* Clear (toggle) the bit in HWSTATMETA for our interrupt. */ - metag_internal_irq_ack(data); -} - -/* - * metag_internal_irq_ack - acknowledge irq - * @irq: the irq to ack - */ -static void metag_internal_irq_ack(struct irq_data *data) -{ - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << hw; - - if (metag_in32(HWSTATMETA) & bit) - metag_out32(bit, HWSTATMETA); -} - -/** - * metag_internal_irq_mask() - mask an internal irq by unvectoring - * @data: data for the internal irq to mask - * - * HWSTATMETA has no mask register. Instead the IRQ is unvectored from the core - * and retriggered if necessary later. - */ -static void metag_internal_irq_mask(struct irq_data *data) -{ - struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; - irq_hw_number_t hw = data->hwirq; - void __iomem *vec_addr = metag_hwvec_addr(hw); - - clear_bit(hw, &priv->unmasked); - - /* there is no interrupt mask, so unvector the interrupt */ - metag_out32(0, vec_addr); -} - -/** - * meta_intc_unmask_edge_irq_nomask() - unmask an edge irq by revectoring - * @data: data for the internal irq to unmask - * - * HWSTATMETA has no mask register. Instead the IRQ is revectored back to the - * core and retriggered if necessary. - */ -static void metag_internal_irq_unmask(struct irq_data *data) -{ - struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; - irq_hw_number_t hw = data->hwirq; - unsigned int bit = 1 << hw; - void __iomem *vec_addr = metag_hwvec_addr(hw); - unsigned int thread = hard_processor_id(); - - set_bit(hw, &priv->unmasked); - - /* there is no interrupt mask, so revector the interrupt */ - metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), vec_addr); - - /* - * Re-trigger interrupt - * - * Writing a 1 toggles, and a 0->1 transition triggers. We only - * retrigger if the status bit is already set, which means we - * need to clear it first. Retriggering is fundamentally racy - * because if the interrupt fires again after we clear it we - * could end up clearing it again and the interrupt handler - * thinking it hasn't fired. Therefore we need to keep trying to - * retrigger until the bit is set. - */ - if (metag_in32(HWSTATMETA) & bit) { - metag_out32(bit, HWSTATMETA); - while (!(metag_in32(HWSTATMETA) & bit)) - metag_out32(bit, HWSTATMETA); - } -} - -#ifdef CONFIG_SMP -/* - * metag_internal_irq_set_affinity - set the affinity for an interrupt - */ -static int metag_internal_irq_set_affinity(struct irq_data *data, - const struct cpumask *cpumask, bool force) -{ - unsigned int cpu, thread; - irq_hw_number_t hw = data->hwirq; - /* - * Wire up this interrupt from *VECINT to the Meta core. - * - * Note that we can't wire up *VECINT to interrupt more than - * one cpu (the interrupt code doesn't support it), so we just - * pick the first cpu we find in 'cpumask'. - */ - cpu = cpumask_any_and(cpumask, cpu_online_mask); - thread = cpu_2_hwthread_id[cpu]; - - metag_out32(TBI_TRIG_VEC(TBID_SIGNUM_TR1(thread)), - metag_hwvec_addr(hw)); - - return 0; -} -#endif - -/* - * metag_internal_irq_demux - irq de-multiplexer - * @irq: the interrupt number - * @desc: the interrupt description structure for this irq - * - * The cpu receives an interrupt on TR1 when an interrupt has - * occurred. It is this function's job to demux this irq and - * figure out exactly which trigger needs servicing. - */ -static void metag_internal_irq_demux(struct irq_desc *desc) -{ - struct metag_internal_irq_priv *priv = irq_desc_get_handler_data(desc); - irq_hw_number_t hw; - unsigned int irq_no; - u32 status; - -recalculate: - status = metag_in32(HWSTATMETA) & priv->unmasked; - - for (hw = 0; status != 0; status >>= 1, ++hw) { - if (status & 0x1) { - /* - * Map the hardware IRQ number to a virtual Linux IRQ - * number. - */ - irq_no = irq_linear_revmap(priv->domain, hw); - - /* - * Only fire off interrupts that are - * registered to be handled by the kernel. - * Other interrupts are probably being - * handled by other Meta hardware threads. - */ - generic_handle_irq(irq_no); - - /* - * The handler may have re-enabled interrupts - * which could have caused a nested invocation - * of this code and make the copy of the - * status register we are using invalid. - */ - goto recalculate; - } - } -} - -/** - * internal_irq_map() - Map an internal meta IRQ to a virtual IRQ number. - * @hw: Number of the internal IRQ. Must be in range. - * - * Returns: The virtual IRQ number of the Meta internal IRQ specified by - * @hw. - */ -int internal_irq_map(unsigned int hw) -{ - struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; - if (!priv->domain) - return -ENODEV; - return irq_create_mapping(priv->domain, hw); -} - -/** - * metag_internal_irq_init_cpu - regsister with the Meta cpu - * @cpu: the CPU to register on - * - * Configure @cpu's TR1 irq so that we can demux irqs. - */ -static void metag_internal_irq_init_cpu(struct metag_internal_irq_priv *priv, - int cpu) -{ - unsigned int thread = cpu_2_hwthread_id[cpu]; - unsigned int signum = TBID_SIGNUM_TR1(thread); - int irq = tbisig_map(signum); - - /* Register the multiplexed IRQ handler */ - irq_set_chained_handler_and_data(irq, metag_internal_irq_demux, priv); - irq_set_irq_type(irq, IRQ_TYPE_LEVEL_LOW); -} - -/** - * metag_internal_intc_map() - map an internal irq - * @d: irq domain of internal trigger block - * @irq: virtual irq number - * @hw: hardware irq number within internal trigger block - * - * This sets up a virtual irq for a specified hardware interrupt. The irq chip - * and handler is configured. - */ -static int metag_internal_intc_map(struct irq_domain *d, unsigned int irq, - irq_hw_number_t hw) -{ - /* only register interrupt if it is mapped */ - if (!metag_hwvec_addr(hw)) - return -EINVAL; - - irq_set_chip_and_handler(irq, &internal_irq_edge_chip, - handle_edge_irq); - return 0; -} - -static const struct irq_domain_ops metag_internal_intc_domain_ops = { - .map = metag_internal_intc_map, -}; - -/** - * metag_internal_irq_register - register internal IRQs - * - * Register the irq chip and handler function for all internal IRQs - */ -int __init init_internal_IRQ(void) -{ - struct metag_internal_irq_priv *priv = &metag_internal_irq_priv; - unsigned int cpu; - - /* Set up an IRQ domain */ - priv->domain = irq_domain_add_linear(NULL, 32, - &metag_internal_intc_domain_ops, - priv); - if (unlikely(!priv->domain)) { - pr_err("meta-internal-intc: cannot add IRQ domain\n"); - return -ENOMEM; - } - - /* Setup TR1 for all cpus. */ - for_each_possible_cpu(cpu) - metag_internal_irq_init_cpu(priv, cpu); - - return 0; -}; |