diff options
Diffstat (limited to 'drivers/media/dvb')
78 files changed, 5727 insertions, 4388 deletions
diff --git a/drivers/media/dvb/Kconfig b/drivers/media/dvb/Kconfig index 01387f883cdf..3f0ec6be03ae 100644 --- a/drivers/media/dvb/Kconfig +++ b/drivers/media/dvb/Kconfig @@ -40,6 +40,10 @@ comment "Supported BT878 Adapters" depends on DVB_CORE && PCI source "drivers/media/dvb/bt8xx/Kconfig" +comment "Supported Pluto2 Adapters" + depends on DVB_CORE && PCI +source "drivers/media/dvb/pluto2/Kconfig" + comment "Supported DVB Frontends" depends on DVB_CORE source "drivers/media/dvb/frontends/Kconfig" diff --git a/drivers/media/dvb/Makefile b/drivers/media/dvb/Makefile index 3c6ff1619103..a7ad0841e6fc 100644 --- a/drivers/media/dvb/Makefile +++ b/drivers/media/dvb/Makefile @@ -2,4 +2,4 @@ # Makefile for the kernel multimedia device drivers. # -obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ +obj-y := dvb-core/ frontends/ ttpci/ ttusb-dec/ ttusb-budget/ b2c2/ bt8xx/ cinergyT2/ dvb-usb/ pluto2/ diff --git a/drivers/media/dvb/b2c2/Kconfig b/drivers/media/dvb/b2c2/Kconfig index fafd0ab3a28f..d7417eac2aba 100644 --- a/drivers/media/dvb/b2c2/Kconfig +++ b/drivers/media/dvb/b2c2/Kconfig @@ -35,17 +35,3 @@ config DVB_B2C2_FLEXCOP_DEBUG help Say Y if you want to enable the module option to control debug messages of all B2C2 FlexCop drivers. - -config DVB_B2C2_SKYSTAR - tristate "B2C2/Technisat Air/Sky/CableStar 2 PCI" - depends on DVB_CORE && PCI - select DVB_STV0299 - select DVB_MT352 - select DVB_MT312 - select DVB_NXT2002 - help - Support for the Skystar2 PCI DVB card by Technisat, which - is equipped with the FlexCopII chipset by B2C2, and - for the B2C2/BBTI Air2PC-ATSC card. - - Say Y if you own such a device and want to use it. diff --git a/drivers/media/dvb/b2c2/Makefile b/drivers/media/dvb/b2c2/Makefile index 7703812af34f..1a1c3bca55fa 100644 --- a/drivers/media/dvb/b2c2/Makefile +++ b/drivers/media/dvb/b2c2/Makefile @@ -9,6 +9,4 @@ obj-$(CONFIG_DVB_B2C2_FLEXCOP_PCI) += b2c2-flexcop-pci.o b2c2-flexcop-usb-objs = flexcop-usb.o obj-$(CONFIG_DVB_B2C2_FLEXCOP_USB) += b2c2-flexcop-usb.o -obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o - EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/b2c2/flexcop-common.h b/drivers/media/dvb/b2c2/flexcop-common.h index 773d158032df..a94912ac1872 100644 --- a/drivers/media/dvb/b2c2/flexcop-common.h +++ b/drivers/media/dvb/b2c2/flexcop-common.h @@ -108,6 +108,8 @@ void flexcop_device_kfree(struct flexcop_device*); int flexcop_device_initialize(struct flexcop_device*); void flexcop_device_exit(struct flexcop_device *fc); +void flexcop_reset_block_300(struct flexcop_device *fc); + /* from flexcop-dma.c */ int flexcop_dma_allocate(struct pci_dev *pdev, struct flexcop_dma *dma, u32 size); void flexcop_dma_free(struct flexcop_dma *dma); @@ -115,7 +117,8 @@ void flexcop_dma_free(struct flexcop_dma *dma); int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff); -int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index); +int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx); +int flexcop_dma_xfer_control(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, flexcop_dma_addr_index_t index, int onoff); int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles); int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets); @@ -151,6 +154,7 @@ int flexcop_sram_init(struct flexcop_device *fc); /* from flexcop-misc.c */ void flexcop_determine_revision(struct flexcop_device *fc); void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const char *suffix); +void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num); /* from flexcop-hw-filter.c */ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *dvbdmxfeed, int onoff); diff --git a/drivers/media/dvb/b2c2/flexcop-dma.c b/drivers/media/dvb/b2c2/flexcop-dma.c index 8d2706075360..cf4ed1df6086 100644 --- a/drivers/media/dvb/b2c2/flexcop-dma.c +++ b/drivers/media/dvb/b2c2/flexcop-dma.c @@ -37,22 +37,90 @@ void flexcop_dma_free(struct flexcop_dma *dma) } EXPORT_SYMBOL(flexcop_dma_free); -int flexcop_dma_control_timer_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +int flexcop_dma_config(struct flexcop_device *fc, + struct flexcop_dma *dma, + flexcop_dma_index_t dma_idx) { - flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); + flexcop_ibi_value v0x0,v0x4,v0xc; + v0x0.raw = v0x4.raw = v0xc.raw = 0; - if (no & FC_DMA_1) - v.ctrl_208.DMA1_Timer_Enable_sig = onoff; + v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; + v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; + v0x4.dma_0x4_write.dma_addr_size = dma->size / 4; - if (no & FC_DMA_2) - v.ctrl_208.DMA2_Timer_Enable_sig = onoff; + if ((dma_idx & FC_DMA_1) == dma_idx) { + fc->write_ibi_reg(fc,dma1_000,v0x0); + fc->write_ibi_reg(fc,dma1_004,v0x4); + fc->write_ibi_reg(fc,dma1_00c,v0xc); + } else if ((dma_idx & FC_DMA_2) == dma_idx) { + fc->write_ibi_reg(fc,dma2_010,v0x0); + fc->write_ibi_reg(fc,dma2_014,v0x4); + fc->write_ibi_reg(fc,dma2_01c,v0xc); + } else { + err("either DMA1 or DMA2 can be configured at the within one flexcop_dma_config call."); + return -EINVAL; + } - fc->write_ibi_reg(fc,ctrl_208,v); return 0; } -EXPORT_SYMBOL(flexcop_dma_control_timer_irq); +EXPORT_SYMBOL(flexcop_dma_config); + +/* start the DMA transfers, but not the DMA IRQs */ +int flexcop_dma_xfer_control(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + flexcop_dma_addr_index_t index, + int onoff) +{ + flexcop_ibi_value v0x0,v0xc; + flexcop_ibi_register r0x0,r0xc; + + if ((dma_idx & FC_DMA_1) == dma_idx) { + r0x0 = dma1_000; + r0xc = dma1_00c; + } else if ((dma_idx & FC_DMA_2) == dma_idx) { + r0x0 = dma2_010; + r0xc = dma2_01c; + } else { + err("either transfer DMA1 or DMA2 can be started within one flexcop_dma_xfer_control call."); + return -EINVAL; + } + + v0x0 = fc->read_ibi_reg(fc,r0x0); + v0xc = fc->read_ibi_reg(fc,r0xc); + + deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw); + deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw); + + if (index & FC_DMA_SUBADDR_0) + v0x0.dma_0x0.dma_0start = onoff; + + if (index & FC_DMA_SUBADDR_1) + v0xc.dma_0xc.dma_1start = onoff; + + fc->write_ibi_reg(fc,r0x0,v0x0); + fc->write_ibi_reg(fc,r0xc,v0xc); + + deb_rdump("reg: %03x: %x\n",r0x0,v0x0.raw); + deb_rdump("reg: %03x: %x\n",r0xc,v0xc.raw); + return 0; +} +EXPORT_SYMBOL(flexcop_dma_xfer_control); + +static int flexcop_dma_remap(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + int onoff) +{ + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + deb_info("%s\n",__FUNCTION__); + v.dma_0xc.remap_enable = onoff; + fc->write_ibi_reg(fc,r,v); + return 0; +} -int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +int flexcop_dma_control_size_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, + int onoff) { flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); @@ -67,75 +135,64 @@ int flexcop_dma_control_size_irq(struct flexcop_device *fc, flexcop_dma_index_t } EXPORT_SYMBOL(flexcop_dma_control_size_irq); -int flexcop_dma_control_packet_irq(struct flexcop_device *fc, flexcop_dma_index_t no, int onoff) +int flexcop_dma_control_timer_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, + int onoff) { flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); if (no & FC_DMA_1) - v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff; + v.ctrl_208.DMA1_Timer_Enable_sig = onoff; if (no & FC_DMA_2) - v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff; + v.ctrl_208.DMA2_Timer_Enable_sig = onoff; fc->write_ibi_reg(fc,ctrl_208,v); return 0; } -EXPORT_SYMBOL(flexcop_dma_control_packet_irq); +EXPORT_SYMBOL(flexcop_dma_control_timer_irq); -int flexcop_dma_config(struct flexcop_device *fc, struct flexcop_dma *dma, flexcop_dma_index_t dma_idx,flexcop_dma_addr_index_t index) +/* 1 cycles = 1.97 msec */ +int flexcop_dma_config_timer(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + u8 cycles) { + flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; + flexcop_ibi_value v = fc->read_ibi_reg(fc,r); - flexcop_ibi_value v0x0,v0x4,v0xc; - v0x0.raw = v0x4.raw = v0xc.raw = 0; - - v0x0.dma_0x0.dma_address0 = dma->dma_addr0 >> 2; - v0xc.dma_0xc.dma_address1 = dma->dma_addr1 >> 2; - v0x4.dma_0x4_write.dma_addr_size = dma->size / 4; - - if (index & FC_DMA_SUBADDR_0) - v0x0.dma_0x0.dma_0start = 1; - - if (index & FC_DMA_SUBADDR_1) - v0xc.dma_0xc.dma_1start = 1; - - if (dma_idx & FC_DMA_1) { - fc->write_ibi_reg(fc,dma1_000,v0x0); - fc->write_ibi_reg(fc,dma1_004,v0x4); - fc->write_ibi_reg(fc,dma1_00c,v0xc); - } else { /* (dma_idx & FC_DMA_2) */ - fc->write_ibi_reg(fc,dma2_010,v0x0); - fc->write_ibi_reg(fc,dma2_014,v0x4); - fc->write_ibi_reg(fc,dma2_01c,v0xc); - } - - return 0; -} -EXPORT_SYMBOL(flexcop_dma_config); + flexcop_dma_remap(fc,dma_idx,0); -static int flexcop_dma_remap(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, int onoff) -{ - flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_00c : dma2_01c; - flexcop_ibi_value v = fc->read_ibi_reg(fc,r); - v.dma_0xc.remap_enable = onoff; + deb_info("%s\n",__FUNCTION__); + v.dma_0x4_write.dmatimer = cycles; fc->write_ibi_reg(fc,r,v); return 0; } +EXPORT_SYMBOL(flexcop_dma_config_timer); -/* 1 cycles = 1.97 msec */ -int flexcop_dma_config_timer(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 cycles) +/* packet IRQ does not exist in FCII or FCIIb - according to data book and tests */ +int flexcop_dma_control_packet_irq(struct flexcop_device *fc, + flexcop_dma_index_t no, + int onoff) { - flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; - flexcop_ibi_value v = fc->read_ibi_reg(fc,r); + flexcop_ibi_value v = fc->read_ibi_reg(fc,ctrl_208); - flexcop_dma_remap(fc,dma_idx,0); + deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw); + if (no & FC_DMA_1) + v.ctrl_208.DMA1_Size_IRQ_Enable_sig = onoff; + + if (no & FC_DMA_2) + v.ctrl_208.DMA2_Size_IRQ_Enable_sig = onoff; + + fc->write_ibi_reg(fc,ctrl_208,v); + deb_rdump("reg: %03x: %x\n",ctrl_208,v.raw); - v.dma_0x4_write.dmatimer = cycles >> 1; - fc->write_ibi_reg(fc,r,v); return 0; } -EXPORT_SYMBOL(flexcop_dma_config_timer); +EXPORT_SYMBOL(flexcop_dma_control_packet_irq); -int flexcop_dma_config_packet_count(struct flexcop_device *fc, flexcop_dma_index_t dma_idx, u8 packets) +int flexcop_dma_config_packet_count(struct flexcop_device *fc, + flexcop_dma_index_t dma_idx, + u8 packets) { flexcop_ibi_register r = (dma_idx & FC_DMA_1) ? dma1_004 : dma2_014; flexcop_ibi_value v = fc->read_ibi_reg(fc,r); diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c index 2baf43d3ce8f..75cf237196eb 100644 --- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c +++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c @@ -10,6 +10,8 @@ static void flexcop_rcv_data_ctrl(struct flexcop_device *fc, int onoff) { flexcop_set_ibi_value(ctrl_208,Rcv_Data_sig,onoff); + + deb_ts("rcv_data is now: '%s'\n",onoff ? "on" : "off"); } void flexcop_smc_ctrl(struct flexcop_device *fc, int onoff) @@ -151,7 +153,7 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d { int max_pid_filter = 6 + fc->has_32_hw_pid_filter*32; - fc->feedcount += onoff ? 1 : -1; + fc->feedcount += onoff ? 1 : -1; /* the number of PIDs/Feed currently requested */ if (dvbdmxfeed->index >= max_pid_filter) fc->extra_feedcount += onoff ? 1 : -1; @@ -178,8 +180,14 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d /* if it was the first or last feed request change the stream-status */ if (fc->feedcount == onoff) { flexcop_rcv_data_ctrl(fc,onoff); - if (fc->stream_control) + if (fc->stream_control) /* device specific stream control */ fc->stream_control(fc,onoff); + + /* feeding stopped -> reset the flexcop filter*/ + if (onoff == 0) { + flexcop_reset_block_300(fc); + flexcop_hw_filter_init(fc); + } } return 0; diff --git a/drivers/media/dvb/b2c2/flexcop-misc.c b/drivers/media/dvb/b2c2/flexcop-misc.c index 23082545651f..3a08d38b318a 100644 --- a/drivers/media/dvb/b2c2/flexcop-misc.c +++ b/drivers/media/dvb/b2c2/flexcop-misc.c @@ -65,3 +65,15 @@ void flexcop_device_name(struct flexcop_device *fc,const char *prefix,const flexcop_device_names[fc->dev_type],flexcop_bus_names[fc->bus_type], flexcop_revision_names[fc->rev],suffix); } + +void flexcop_dump_reg(struct flexcop_device *fc, flexcop_ibi_register reg, int num) +{ + flexcop_ibi_value v; + int i; + for (i = 0; i < num; i++) { + v = fc->read_ibi_reg(fc,reg+4*i); + deb_rdump("0x%03x: %08x, ",reg+4*i, v.raw); + } + deb_rdump("\n"); +} +EXPORT_SYMBOL(flexcop_dump_reg); diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index ed717c0073d5..2f76eb3fea40 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -13,6 +13,10 @@ static int enable_pid_filtering = 1; module_param(enable_pid_filtering, int, 0444); MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1"); +static int irq_chk_intv; +module_param(irq_chk_intv, int, 0644); +MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging)."); + #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG #define dprintk(level,args...) \ do { if ((debug & level)) printk(args); } while (0) @@ -26,6 +30,7 @@ MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported #define deb_reg(args...) dprintk(0x02,args) #define deb_ts(args...) dprintk(0x04,args) #define deb_irq(args...) dprintk(0x08,args) +#define deb_chk(args...) dprintk(0x10,args) static int debug = 0; module_param(debug, int, 0644); @@ -56,6 +61,10 @@ struct flexcop_pci { spinlock_t irq_lock; + unsigned long last_irq; + + struct work_struct irq_check_work; + struct flexcop_device *fc_dev; }; @@ -88,18 +97,55 @@ static int flexcop_pci_write_ibi_reg(struct flexcop_device *fc, flexcop_ibi_regi return 0; } +static void flexcop_pci_irq_check_work(void *data) +{ + struct flexcop_pci *fc_pci = data; + struct flexcop_device *fc = fc_pci->fc_dev; + + flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714); + + flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4); + + if (v.sram_dest_reg_714.net_ovflow_error) + deb_chk("sram net_ovflow_error\n"); + if (v.sram_dest_reg_714.media_ovflow_error) + deb_chk("sram media_ovflow_error\n"); + if (v.sram_dest_reg_714.cai_ovflow_error) + deb_chk("sram cai_ovflow_error\n"); + if (v.sram_dest_reg_714.cai_ovflow_error) + deb_chk("sram cai_ovflow_error\n"); + + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); +} + /* When PID filtering is turned on, we use the timer IRQ, because small amounts * of data need to be passed to the user space instantly as well. When PID * filtering is turned off, we use the page-change-IRQ */ -static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) +static irqreturn_t flexcop_pci_isr(int irq, void *dev_id, struct pt_regs *regs) { struct flexcop_pci *fc_pci = dev_id; struct flexcop_device *fc = fc_pci->fc_dev; - flexcop_ibi_value v = fc->read_ibi_reg(fc,irq_20c); + flexcop_ibi_value v; irqreturn_t ret = IRQ_HANDLED; spin_lock_irq(&fc_pci->irq_lock); + v = fc->read_ibi_reg(fc,irq_20c); + + /* errors */ + if (v.irq_20c.Data_receiver_error) + deb_chk("data receiver error\n"); + if (v.irq_20c.Continuity_error_flag) + deb_chk("Contunuity error flag is set\n"); + if (v.irq_20c.LLC_SNAP_FLAG_set) + deb_chk("LLC_SNAP_FLAG_set is set\n"); + if (v.irq_20c.Transport_Error) + deb_chk("Transport error\n"); + + if ((fc_pci->count % 1000) == 0) + deb_chk("%d valid irq took place so far\n",fc_pci->count); + if (v.irq_20c.DMA1_IRQ_Status == 1) { if (fc_pci->active_dma1_addr == 0) flexcop_pass_dmx_packets(fc_pci->fc_dev,fc_pci->dma[0].cpu_addr0,fc_pci->dma[0].size / 188); @@ -115,8 +161,9 @@ static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) fc->read_ibi_reg(fc,dma1_008).dma_0x8.dma_cur_addr << 2; u32 cur_pos = cur_addr - fc_pci->dma[0].dma_addr0; - deb_irq("irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ", - v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos); + deb_irq("%u irq: %08x cur_addr: %08x: cur_pos: %08x, last_cur_pos: %08x ", + jiffies_to_usecs(jiffies - fc_pci->last_irq),v.raw,cur_addr,cur_pos,fc_pci->last_dma1_cur_pos); + fc_pci->last_irq = jiffies; /* buffer end was reached, restarted from the beginning * pass the data from last_cur_pos to the buffer end to the demux @@ -127,7 +174,6 @@ static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) fc_pci->dma[0].cpu_addr0 + fc_pci->last_dma1_cur_pos, (fc_pci->dma[0].size*2) - fc_pci->last_dma1_cur_pos); fc_pci->last_dma1_cur_pos = 0; - fc_pci->count = 0; } if (cur_pos > fc_pci->last_dma1_cur_pos) { @@ -139,16 +185,14 @@ static irqreturn_t flexcop_pci_irq(int irq, void *dev_id, struct pt_regs *regs) deb_irq("\n"); fc_pci->last_dma1_cur_pos = cur_pos; - } else + fc_pci->count++; + } else { + deb_irq("isr for flexcop called, apparently without reason (%08x)\n",v.raw); ret = IRQ_NONE; + } spin_unlock_irq(&fc_pci->irq_lock); -/* packet count would be ideal for hw filtering, but it isn't working. Either - * the data book is wrong, or I'm unable to read it correctly */ - -/* if (v.irq_20c.DMA1_Size_IRQ_Status == 1) { packet counter */ - return ret; } @@ -156,30 +200,35 @@ static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff) { struct flexcop_pci *fc_pci = fc->bus_specific; if (onoff) { - flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1); - flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1); - flexcop_dma_config_timer(fc,FC_DMA_1,1); + flexcop_dma_config(fc,&fc_pci->dma[0],FC_DMA_1); + flexcop_dma_config(fc,&fc_pci->dma[1],FC_DMA_2); - if (fc_pci->fc_dev->pid_filtering) { - fc_pci->last_dma1_cur_pos = 0; - flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); - } else { - fc_pci->active_dma1_addr = 0; - flexcop_dma_control_size_irq(fc,FC_DMA_1,1); - } + flexcop_dma_config_timer(fc,FC_DMA_1,0); -/* flexcop_dma_config_packet_count(fc,FC_DMA_1,0xc0); - flexcop_dma_control_packet_irq(fc,FC_DMA_1,1); */ + flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,1); + deb_irq("DMA xfer enabled\n"); - deb_irq("irqs enabled\n"); + fc_pci->last_dma1_cur_pos = 0; + flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); + deb_irq("IRQ enabled\n"); + +// fc_pci->active_dma1_addr = 0; +// flexcop_dma_control_size_irq(fc,FC_DMA_1,1); + + if (irq_chk_intv > 0) + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); } else { - if (fc_pci->fc_dev->pid_filtering) - flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); - else - flexcop_dma_control_size_irq(fc,FC_DMA_1,0); + if (irq_chk_intv > 0) + cancel_delayed_work(&fc_pci->irq_check_work); + + flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); + deb_irq("IRQ disabled\n"); -// flexcop_dma_control_packet_irq(fc,FC_DMA_1,0); - deb_irq("irqs disabled\n"); +// flexcop_dma_control_size_irq(fc,FC_DMA_1,0); + + flexcop_dma_xfer_control(fc,FC_DMA_1,FC_DMA_SUBADDR_0 | FC_DMA_SUBADDR_1,0); + deb_irq("DMA xfer disabled\n"); } return 0; @@ -198,6 +247,7 @@ static int flexcop_pci_dma_init(struct flexcop_pci *fc_pci) flexcop_sram_set_dest(fc_pci->fc_dev,FC_SRAM_DEST_CAO | FC_SRAM_DEST_CAI, FC_SRAM_DEST_TARGET_DMA2); fc_pci->init_state |= FC_PCI_DMA_INIT; + goto success; dma1_free: flexcop_dma_free(&fc_pci->dma[0]); @@ -244,7 +294,7 @@ static int flexcop_pci_init(struct flexcop_pci *fc_pci) pci_set_drvdata(fc_pci->pdev, fc_pci); - if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_irq, + if ((ret = request_irq(fc_pci->pdev->irq, flexcop_pci_isr, SA_SHIRQ, DRIVER_NAME, fc_pci)) != 0) goto err_pci_iounmap; @@ -324,6 +374,8 @@ static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e if ((ret = flexcop_pci_dma_init(fc_pci)) != 0) goto err_fc_exit; + INIT_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work, fc_pci); + goto success; err_fc_exit: flexcop_device_exit(fc); @@ -350,17 +402,17 @@ static void flexcop_pci_remove(struct pci_dev *pdev) static struct pci_device_id flexcop_pci_tbl[] = { { PCI_DEVICE(0x13d0, 0x2103) }, -/* { PCI_DEVICE(0x13d0, 0x2200) }, PCI FlexCopIII ? */ +/* { PCI_DEVICE(0x13d0, 0x2200) }, ? */ { }, }; MODULE_DEVICE_TABLE(pci, flexcop_pci_tbl); static struct pci_driver flexcop_pci_driver = { - .name = "Technisat/B2C2 FlexCop II/IIb/III PCI", + .name = "b2c2_flexcop_pci", .id_table = flexcop_pci_tbl, - .probe = flexcop_pci_probe, - .remove = flexcop_pci_remove, + .probe = flexcop_pci_probe, + .remove = flexcop_pci_remove, }; static int __init flexcop_pci_module_init(void) diff --git a/drivers/media/dvb/b2c2/flexcop-reg.h b/drivers/media/dvb/b2c2/flexcop-reg.h index 75b50f21afe6..4ae1eb5bfe98 100644 --- a/drivers/media/dvb/b2c2/flexcop-reg.h +++ b/drivers/media/dvb/b2c2/flexcop-reg.h @@ -36,555 +36,21 @@ typedef enum { extern const char *flexcop_device_names[]; /* FlexCop IBI Registers */ +#if defined(__LITTLE_ENDIAN) + #include "flexcop_ibi_value_le.h" +#elif defined(__BIG_ENDIAN) + #include "flexcop_ibi_value_be.h" +#else + #error no endian defined +#endif -/* flexcop_ibi_reg - a huge union representing the register structure */ -typedef union { - u32 raw; - -/* DMA 0x000 to 0x01c - * DMA1 0x000 to 0x00c - * DMA2 0x010 to 0x01c - */ - struct { - u32 dma_0start : 1; /* set: data will be delivered to dma1_address0 */ - u32 dma_0No_update : 1; /* set: dma1_cur_address will be updated, unset: no update */ - u32 dma_address0 :30; /* physical/virtual host memory address0 DMA */ - } dma_0x0; - - struct { - u32 DMA_maxpackets : 8; /* (remapped) PCI DMA1 Packet Count Interrupt. This variable - is able to be read and written while bit(1) of register - 0x00c (remap_enable) is set. This variable represents - the number of packets that will be transmitted to the PCI - host using PCI DMA1 before an interrupt to the PCI is - asserted. This functionality may be enabled using bit(20) - of register 0x208. N=0 disables the IRQ. */ - u32 dma_addr_size :24; /* size of memory buffer in DWORDs (bytesize / 4) for DMA */ - } dma_0x4_remap; - - struct { - u32 dma1timer : 7; /* reading PCI DMA1 timer ... when remap_enable is 0 */ - u32 unused : 1; - u32 dma_addr_size :24; - } dma_0x4_read; - - struct { - u32 unused : 1; - u32 dmatimer : 7; /* writing PCI DMA1 timer ... when remap_enable is 0 */ - u32 dma_addr_size :24; - } dma_0x4_write; - - struct { - u32 unused : 2; - u32 dma_cur_addr :30; /* current physical host memory address pointer for DMA */ - } dma_0x8; - - struct { - u32 dma_1start : 1; /* set: data will be delivered to dma_address1, when dma_address0 is full */ - u32 remap_enable : 1; /* remap enable for 0x0x4(7:0) */ - u32 dma_address1 :30; /* Physical/virtual address 1 on DMA */ - } dma_0xc; - -/* Two-wire Serial Master and Clock 0x100-0x110 */ - struct { -// u32 slave_transmitter : 1; /* ???*/ - u32 chipaddr : 7; /* two-line serial address of the target slave */ - u32 reserved1 : 1; - u32 baseaddr : 8; /* address of the location of the read/write operation */ - u32 data1_reg : 8; /* first byte in two-line serial read/write operation */ - u32 working_start : 1; /* when doing a write operation this indicator is 0 when ready - * set to 1 when doing a write operation */ - u32 twoWS_rw : 1; /* read/write indicator (1 = read, 0 write) */ - u32 total_bytes : 2; /* number of data bytes in each two-line serial transaction (0 = 1 byte, 11 = 4byte)*/ - u32 twoWS_port_reg : 2; /* port selection: 01 - Front End/Demod, 10 - EEPROM, 11 - Tuner */ - u32 no_base_addr_ack_error : 1; /* writing: write-req: frame is produced w/o baseaddr, read-req: read-cycles w/o - * preceding address assignment write frame - * ACK_ERROR = 1 when no ACK from slave in the last transaction */ - u32 st_done : 1; /* indicator for transaction is done */ - } tw_sm_c_100; - - struct { - u32 data2_reg : 8; /* 2nd data byte */ - u32 data3_reg : 8; /* 3rd data byte */ - u32 data4_reg : 8; /* 4th data byte */ - u32 exlicit_stops : 1; /* when set, transactions are produced w/o trailing STOP flag, then send isolated STOP flags */ - u32 force_stop : 1; /* isolated stop flag */ - u32 unused : 6; - } tw_sm_c_104; - -/* Clock. The register allows the FCIII to convert an incoming Master clock - * (MCLK) signal into a lower frequency clock through the use of a LowCounter - * (TLO) and a High- Counter (THI). The time counts for THI and TLO are - * measured in MCLK; each count represents 4 MCLK input clock cycles. - * - * The default output for port #1 is set for Front End Demod communication. (0x108) - * The default output for port #2 is set for EEPROM communication. (0x10c) - * The default output for port #3 is set for Tuner communication. (0x110) - */ - struct { - u32 thi1 : 6; /* Thi for port #1 (def: 100110b; 38) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #1 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_108; - - struct { - u32 thi1 : 6; /* Thi for port #2 (def: 111001b; 57) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #2 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_10c; - - struct { - u32 thi1 : 6; /* Thi for port #3 (def: 111001b; 57) */ - u32 reserved1 : 2; - u32 tlo1 : 5; /* Tlo for port #3 (def: 11100b; 28) */ - u32 reserved2 :19; - } tw_sm_c_110; - -/* LNB Switch Frequency 0x200 - * Clock that creates the LNB switch tone. The default is set to have a fixed - * low output (not oscillating) to the LNB_CTL line. - */ - struct { - u32 LNB_CTLHighCount_sig :15; /* It is the number of pre-scaled clock cycles that will be low. */ - u32 LNB_CTLLowCount_sig :15; /* For example, to obtain a 22KHz output given a 45 Mhz Master - Clock signal (MCLK), set PreScalar=01 and LowCounter value to 0x1ff. */ - u32 LNB_CTLPrescaler_sig : 2; /* pre-scaler divides MCLK: 00 (no division), 01 by 2, 10 by 4, 11 by 12 */ - } lnb_switch_freq_200; - -/* ACPI, Peripheral Reset, LNB Polarity - * ACPI power conservation mode, LNB polarity selection (low or high voltage), - * and peripheral reset. - */ - struct { - u32 ACPI1_sig : 1; /* turn of the power of tuner and LNB, not implemented in FCIII */ - u32 ACPI3_sig : 1; /* turn of power of the complete satelite receiver board (except FCIII) */ - u32 LNB_L_H_sig : 1; /* low or high voltage for LNB. (0 = low, 1 = high) */ - u32 Per_reset_sig : 1; /* misc. init reset (default: 1), to reset set to low and back to high */ - u32 reserved :20; - u32 Rev_N_sig_revision_hi : 4;/* 0xc in case of FCIII */ - u32 Rev_N_sig_reserved1 : 2; - u32 Rev_N_sig_caps : 1; /* if 1, FCIII has 32 PID- and MAC-filters and is capable of IP multicast */ - u32 Rev_N_sig_reserved2 : 1; - } misc_204; - -/* Control and Status 0x208 to 0x21c */ -/* Gross enable and disable control */ - struct { - u32 Stream1_filter_sig : 1; /* Stream1 PID filtering */ - u32 Stream2_filter_sig : 1; /* Stream2 PID filtering */ - u32 PCR_filter_sig : 1; /* PCR PID filter */ - u32 PMT_filter_sig : 1; /* PMT PID filter */ - - u32 EMM_filter_sig : 1; /* EMM PID filter */ - u32 ECM_filter_sig : 1; /* ECM PID filter */ - u32 Null_filter_sig : 1; /* Filters null packets, PID=0x1fff. */ - u32 Mask_filter_sig : 1; /* mask PID filter */ - - u32 WAN_Enable_sig : 1; /* WAN output line through V8 memory space is activated. */ - u32 WAN_CA_Enable_sig : 1; /* not in FCIII */ - u32 CA_Enable_sig : 1; /* not in FCIII */ - u32 SMC_Enable_sig : 1; /* CI stream data (CAI) goes directly to the smart card intf (opposed IBI 0x600 or SC-cmd buf). */ - - u32 Per_CA_Enable_sig : 1; /* not in FCIII */ - u32 Multi2_Enable_sig : 1; /* ? */ - u32 MAC_filter_Mode_sig : 1; /* (MAC_filter_enable) Globally enables MAC filters for Net PID filteres. */ - u32 Rcv_Data_sig : 1; /* PID filtering module enable. When this bit is a one, the PID filter will - examine and process packets according to all other (individual) PID - filtering controls. If it a zero, no packet processing of any kind will - take place. All data from the tuner will be thrown away. */ - - u32 DMA1_IRQ_Enable_sig : 1; /* When set, a DWORD counter is enabled on PCI DMA1 that asserts the PCI - * interrupt after the specified count for filling the buffer. */ - u32 DMA1_Timer_Enable_sig : 1; /* When set, a timer is enabled on PCI DMA1 that asserts the PCI interrupt - after a specified amount of time. */ - u32 DMA2_IRQ_Enable_sig : 1; /* same as DMA1_IRQ_Enable_sig but for DMA2 */ - u32 DMA2_Timer_Enable_sig : 1; /* same as DMA1_Timer_Enable_sig but for DMA2 */ - - u32 DMA1_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA1 that asserts the PCI interrupt. */ - u32 DMA2_Size_IRQ_Enable_sig : 1; /* When set, a packet count detector is enabled on PCI DMA2 that asserts the PCI interrupt. */ - u32 Mailbox_from_V8_Enable_sig: 1; /* When set, writes to the mailbox register produce an interrupt to the - PCI host to indicate that mailbox data is available. */ - - u32 unused : 9; - } ctrl_208; - -/* General status. When a PCI interrupt occurs, this register is read to - * discover the reason for the interrupt. - */ - struct { - u32 DMA1_IRQ_Status : 1; /* When set(1) the DMA1 counter had generated an IRQ. Read Only. */ - u32 DMA1_Timer_Status : 1; /* When set(1) the DMA1 timer had generated an IRQ. Read Only. */ - u32 DMA2_IRQ_Status : 1; /* When set(1) the DMA2 counter had generated an IRQ. Read Only. */ - u32 DMA2_Timer_Status : 1; /* When set(1) the DMA2 timer had generated an IRQ. Read Only. */ - u32 DMA1_Size_IRQ_Status : 1; /* (Read only). This register is read after an interrupt to */ - u32 DMA2_Size_IRQ_Status : 1; /* find out why we had an IRQ. Reading this register will clear this bit. Packet count*/ - u32 Mailbox_from_V8_Status_sig: 1; /* Same as above. Reading this register will clear this bit. */ - u32 Data_receiver_error : 1; /* 1 indicate an error in the receiver Front End (Tuner module) */ - u32 Continuity_error_flag : 1; /* 1 indicates a continuity error in the TS stream. */ - u32 LLC_SNAP_FLAG_set : 1; /* 1 indicates that the LCC_SNAP_FLAG was set. */ - u32 Transport_Error : 1; /* When set indicates that an unexpected packet was received. */ - u32 reserved :21; - } irq_20c; - - -/* Software reset register */ - struct { - u32 reset_blocks : 8; /* Enabled when Block_reset_enable = 0xB2 and 0x208 bits 15:8 = 0x00. - Each bit location represents a 0x100 block of registers. Writing - a one in a bit location resets that block of registers and the logic - that it controls. */ - u32 Block_reset_enable : 8; /* This variable is set to 0xB2 when the register is written. */ - u32 Special_controls :16; /* Asserts Reset_V8 => 0xC258; Turns on pci encryption => 0xC25A; - Turns off pci encryption => 0xC259 Note: pci_encryption default - at power-up is ON. */ - } sw_reset_210; - - struct { - u32 vuart_oe_sig : 1; /* When clear, the V8 processor has sole control of the serial UART - (RS-232 Smart Card interface). When set, the IBI interface - defined by register 0x600 controls the serial UART. */ - u32 v2WS_oe_sig : 1; /* When clear, the V8 processor has direct control of the Two-line - Serial Master EEPROM target. When set, the Two-line Serial Master - EEPROM target interface is controlled by IBI register 0x100. */ - u32 halt_V8_sig : 1; /* When set, contiguous wait states are applied to the V8-space - bus masters. Once this signal is cleared, normal V8-space - operations resume. */ - u32 section_pkg_enable_sig: 1; /* When set, this signal enables the front end translation circuitry - to process section packed transport streams. */ - u32 s2p_sel_sig : 1; /* Serial to parallel conversion. When set, polarized transport data - within the FlexCop3 front end circuitry is converted from a serial - stream into parallel data before downstream processing otherwise - interprets the data. */ - u32 unused1 : 3; - u32 polarity_PS_CLK_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream CLOCK signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_VALID_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream VALID signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_SYNC_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream SYNC signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 polarity_PS_ERR_sig: 1; /* This signal is used to invert the input polarity of the tranport - stream ERROR signal before any processing occurs on the transport - stream within FlexCop3. */ - u32 unused2 :20; - } misc_214; - -/* Mailbox from V8 to host */ - struct { - u32 Mailbox_from_V8 :32; /* When this register is written by either the V8 processor or by an - end host, an interrupt is generated to the PCI host to indicate - that mailbox data is available. Reading register 20c will clear - the IRQ. */ - } mbox_v8_to_host_218; - -/* Mailbox from host to v8 Mailbox_to_V8 - * Mailbox_to_V8 mailbox storage register - * used to send messages from PCI to V8. Writing to this register will send an - * IRQ to the V8. Then it can read the data from here. Reading this register - * will clear the IRQ. If the V8 is halted and bit 31 of this register is set, - * then this register is used instead as a direct interface to access the - * V8space memory. - */ - struct { - u32 sysramaccess_data : 8; /* Data byte written or read from the specified address in V8 SysRAM. */ - u32 sysramaccess_addr :15; /* 15 bit address used to access V8 Sys-RAM. */ - u32 unused : 7; - u32 sysramaccess_write: 1; /* Write flag used to latch data into the V8 SysRAM. */ - u32 sysramaccess_busmuster: 1; /* Setting this bit when the V8 is halted at 0x214 Bit(2) allows - this IBI register interface to directly drive the V8-space memory. */ - } mbox_host_to_v8_21c; - - -/* PIDs, Translation Bit, SMC Filter Select 0x300 to 0x31c */ - struct { - u32 Stream1_PID :13; /* Primary use is receiving Net data, so these 13 bits normally - hold the PID value for the desired network stream. */ - u32 Stream1_trans : 1; /* When set, Net translation will take place for Net data ferried in TS packets. */ - u32 MAC_Multicast_filter : 1; /* When clear, multicast MAC filtering is not allowed for Stream1 and PID_n filters. */ - u32 debug_flag_pid_saved : 1; - u32 Stream2_PID :13; /* 13 bits for Stream 2 PID filter value. General use. */ - u32 Stream2_trans : 1; /* When set Tables/CAI translation will take place for the data ferried in - Stream2_PID TS packets. */ - u32 debug_flag_write_status00 : 1; - u32 debug_fifo_problem : 1; - } pid_filter_300; - - struct { - u32 PCR_PID :13; /* PCR stream PID filter value. Primary use is Program Clock Reference stream filtering. */ - u32 PCR_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 debug_overrun3 : 1; - u32 debug_overrun2 : 1; - u32 PMT_PID :13; /* stream PID filter value. Primary use is Program Management Table segment filtering. */ - u32 PMT_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 reserved : 2; - } pid_filter_304; - - struct { - u32 EMM_PID :13; /* EMM PID filter value. Primary use is Entitlement Management Messaging for - conditional access-related data. */ - u32 EMM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 EMM_filter_4 : 1; /* When set will pass only EMM data possessing the same ID code as the - first four bytes (32 bits) of the end-user s 6-byte Smart Card ID number Select */ - u32 EMM_filter_6 : 1; /* When set will pass only EMM data possessing the same 6-byte code as the end-users - complete 6-byte Smart Card ID number. */ - u32 ECM_PID :13; /* ECM PID filter value. Primary use is Entitlement Control Messaging for conditional - access-related data. */ - u32 ECM_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 reserved : 2; - } pid_filter_308; - - struct { - u32 Group_PID :13; /* PID value for group filtering. */ - u32 Group_trans : 1; /* When set, Tables/CAI translation will take place for these packets. */ - u32 unused1 : 2; - u32 Group_mask :13; /* Mask value used in logical "and" equation that defines group filtering */ - u32 unused2 : 3; - } pid_filter_30c_ext_ind_0_7; - - struct { - u32 net_master_read :17; - u32 unused :15; - } pid_filter_30c_ext_ind_1; - - struct { - u32 net_master_write :17; - u32 unused :15; - } pid_filter_30c_ext_ind_2; - - struct { - u32 next_net_master_write :17; - u32 unused :15; - } pid_filter_30c_ext_ind_3; - - struct { - u32 unused1 : 1; - u32 state_write :10; - u32 reserved1 : 6; /* default: 000100 */ - u32 stack_read :10; - u32 reserved2 : 5; /* default: 00100 */ - } pid_filter_30c_ext_ind_4; - - struct { - u32 stack_cnt :10; - u32 unused :22; - } pid_filter_30c_ext_ind_5; - - struct { - u32 pid_fsm_save_reg0 : 2; - u32 pid_fsm_save_reg1 : 2; - u32 pid_fsm_save_reg2 : 2; - u32 pid_fsm_save_reg3 : 2; - u32 pid_fsm_save_reg4 : 2; - u32 pid_fsm_save_reg300 : 2; - u32 write_status1 : 2; - u32 write_status4 : 2; - u32 data_size_reg :12; - u32 unused : 4; - } pid_filter_30c_ext_ind_6; - - struct { - u32 index_reg : 5; /* (Index pointer) Points at an internal PIDn register. A binary code - representing one of 32 internal PIDn registers as well as its - corresponding internal MAC_lown register. */ - u32 extra_index_reg : 3; /* This vector is used to select between sets of debug signals routed to register 0x30c. */ - u32 AB_select : 1; /* Used in conjunction with 0x31c. read/write to the MAC_highA or MAC_highB register - 0=MAC_highB register, 1=MAC_highA */ - u32 pass_alltables : 1; /* 1=Net packets are not filtered against the Network Table ID found in register 0x400. - All types of networks (DVB, ATSC, ISDB) are passed. */ - u32 unused :22; - } index_reg_310; - - struct { - u32 PID :13; /* PID value */ - u32 PID_trans : 1; /* translation will take place for packets filtered */ - u32 PID_enable_bit : 1; /* When set this PID filter is enabled */ - u32 reserved :17; - } pid_n_reg_314; - - struct { - u32 A4_byte : 8; - u32 A5_byte : 8; - u32 A6_byte : 8; - u32 Enable_bit : 1; /* enabled (1) or disabled (1) */ - u32 HighAB_bit : 1; /* use MAC_highA (1) or MAC_highB (0) as MSB */ - u32 reserved : 6; - } mac_low_reg_318; - - struct { - u32 A1_byte : 8; - u32 A2_byte : 8; - u32 A3_byte : 8; - u32 reserved : 8; - } mac_high_reg_31c; - -/* Table, SMCID,MACDestination Filters 0x400 to 0x41c */ - struct { - u32 reserved :16; #define fc_data_Tag_ID_DVB 0x3e #define fc_data_Tag_ID_ATSC 0x3f #define fc_data_Tag_ID_IDSB 0x8b - u32 data_Tag_ID :16; - } data_tag_400; - - struct { - u32 Card_IDbyte6 : 8; - u32 Card_IDbyte5 : 8; - u32 Card_IDbyte4 : 8; - u32 Card_IDbyte3 : 8; - } card_id_408; - - struct { - u32 Card_IDbyte2 : 8; - u32 Card_IDbyte1 : 8; - } card_id_40c; - - /* holding the unique mac address of the receiver which houses the FlexCopIII */ - struct { - u32 MAC1 : 8; - u32 MAC2 : 8; - u32 MAC3 : 8; - u32 MAC6 : 8; - } mac_address_418; - - struct { - u32 MAC7 : 8; - u32 MAC8 : 8; - u32 reserved : 16; - } mac_address_41c; - - struct { - u32 transmitter_data_byte : 8; - u32 ReceiveDataReady : 1; - u32 ReceiveByteFrameError: 1; - u32 txbuffempty : 1; - u32 reserved :21; - } ci_600; - - struct { - u32 pi_d : 8; - u32 pi_ha :20; - u32 pi_rw : 1; - u32 pi_component_reg : 3; - } pi_604; - - struct { - u32 serialReset : 1; - u32 oncecycle_read : 1; - u32 Timer_Read_req : 1; - u32 Timer_Load_req : 1; - u32 timer_data : 7; - u32 unused : 1; /* ??? not mentioned in data book */ - u32 Timer_addr : 5; - u32 reserved : 3; - u32 pcmcia_a_mod_pwr_n : 1; - u32 pcmcia_b_mod_pwr_n : 1; - u32 config_Done_stat : 1; - u32 config_Init_stat : 1; - u32 config_Prog_n : 1; - u32 config_wr_n : 1; - u32 config_cs_n : 1; - u32 config_cclk : 1; - u32 pi_CiMax_IRQ_n : 1; - u32 pi_timeout_status : 1; - u32 pi_wait_n : 1; - u32 pi_busy_n : 1; - } pi_608; - struct { - u32 PID :13; - u32 key_enable : 1; #define fc_key_code_default 0x1 #define fc_key_code_even 0x2 #define fc_key_code_odd 0x3 - u32 key_code : 2; - u32 key_array_col : 3; - u32 key_array_row : 5; - u32 dvb_en : 1; /* 0=TS bypasses the Descrambler */ - u32 rw_flag : 1; - u32 reserved : 6; - } dvb_reg_60c; - -/* SRAM and Output Destination 0x700 to 0x714 */ - struct { - u32 sram_addr :15; - u32 sram_rw : 1; /* 0=write, 1=read */ - u32 sram_data : 8; - u32 sc_xfer_bit : 1; - u32 reserved1 : 3; - u32 oe_pin_reg : 1; - u32 ce_pin_reg : 1; - u32 reserved2 : 1; - u32 start_sram_ibi : 1; - } sram_ctrl_reg_700; - - struct { - u32 net_addr_read :16; - u32 net_addr_write :16; - } net_buf_reg_704; - - struct { - u32 cai_read :11; - u32 reserved1 : 5; - u32 cai_write :11; - u32 reserved2 : 6; - u32 cai_cnt : 4; - } cai_buf_reg_708; - - struct { - u32 cao_read :11; - u32 reserved1 : 5; - u32 cap_write :11; - u32 reserved2 : 6; - u32 cao_cnt : 4; - } cao_buf_reg_70c; - - struct { - u32 media_read :11; - u32 reserved1 : 5; - u32 media_write :11; - u32 reserved2 : 6; - u32 media_cnt : 4; - } media_buf_reg_710; - - struct { - u32 NET_Dest : 2; - u32 CAI_Dest : 2; - u32 CAO_Dest : 2; - u32 MEDIA_Dest : 2; - u32 net_ovflow_error : 1; - u32 media_ovflow_error : 1; - u32 cai_ovflow_error : 1; - u32 cao_ovflow_error : 1; - u32 ctrl_usb_wan : 1; - u32 ctrl_sramdma : 1; - u32 ctrl_maximumfill : 1; - u32 reserved :17; - } sram_dest_reg_714; - - struct { - u32 net_cnt :12; - u32 reserved1 : 4; - u32 net_addr_read : 1; - u32 reserved2 : 3; - u32 net_addr_write : 1; - u32 reserved3 :11; - } net_buf_reg_718; - - struct { - u32 wan_speed_sig : 2; - u32 reserved1 : 6; - u32 wan_wait_state : 8; - u32 sram_chip : 2; - u32 sram_memmap : 2; - u32 reserved2 : 4; - u32 wan_pkt_frame : 4; - u32 reserved3 : 4; - } wan_ctrl_reg_71c; -} flexcop_ibi_value; extern flexcop_ibi_value ibi_zero; diff --git a/drivers/media/dvb/b2c2/flexcop-usb.c b/drivers/media/dvb/b2c2/flexcop-usb.c index 0113449abd15..0a78ba3737a5 100644 --- a/drivers/media/dvb/b2c2/flexcop-usb.c +++ b/drivers/media/dvb/b2c2/flexcop-usb.c @@ -545,7 +545,7 @@ static struct usb_device_id flexcop_usb_table [] = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver flexcop_usb_driver = { .owner = THIS_MODULE, - .name = "Technisat/B2C2 FlexCop II/IIb/III USB", + .name = "b2c2_flexcop_usb", .probe = flexcop_usb_probe, .disconnect = flexcop_usb_disconnect, .id_table = flexcop_usb_table, diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index 8b5d14dd36e3..12873d435406 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -46,7 +46,7 @@ int b2c2_flexcop_debug; module_param_named(debug, b2c2_flexcop_debug, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram (|-able))." DEBSTATUS); +MODULE_PARM_DESC(debug, "set debug level (1=info,2=tuner,4=i2c,8=ts,16=sram,32=reg (|-able))." DEBSTATUS); #undef DEBSTATUS /* global zero for ibi values */ @@ -173,9 +173,20 @@ static void flexcop_reset(struct flexcop_device *fc) fc->write_ibi_reg(fc,ctrl_208,ibi_zero); v210.raw = 0; - v210.sw_reset_210.reset_blocks = 0xff; + v210.sw_reset_210.reset_block_000 = 1; + v210.sw_reset_210.reset_block_100 = 1; + v210.sw_reset_210.reset_block_200 = 1; + v210.sw_reset_210.reset_block_300 = 1; + v210.sw_reset_210.reset_block_400 = 1; + v210.sw_reset_210.reset_block_500 = 1; + v210.sw_reset_210.reset_block_600 = 1; + v210.sw_reset_210.reset_block_700 = 1; v210.sw_reset_210.Block_reset_enable = 0xb2; + + v210.sw_reset_210.Special_controls = 0xc259; + fc->write_ibi_reg(fc,sw_reset_210,v210); + msleep(1); /* reset the periphical devices */ @@ -186,6 +197,25 @@ static void flexcop_reset(struct flexcop_device *fc) fc->write_ibi_reg(fc,misc_204,v204); } +void flexcop_reset_block_300(struct flexcop_device *fc) +{ + flexcop_ibi_value v208_save = fc->read_ibi_reg(fc,ctrl_208), + v210 = fc->read_ibi_reg(fc,sw_reset_210); + + deb_rdump("208: %08x, 210: %08x\n",v208_save.raw,v210.raw); + + fc->write_ibi_reg(fc,ctrl_208,ibi_zero); + + v210.sw_reset_210.reset_block_300 = 1; + v210.sw_reset_210.Block_reset_enable = 0xb2; + + fc->write_ibi_reg(fc,sw_reset_210,v210); + msleep(1); + + fc->write_ibi_reg(fc,ctrl_208,v208_save); +} +EXPORT_SYMBOL(flexcop_reset_block_300); + struct flexcop_device *flexcop_device_kmalloc(size_t bus_specific_len) { void *bus; diff --git a/drivers/media/dvb/b2c2/flexcop.h b/drivers/media/dvb/b2c2/flexcop.h index caa343a97bdc..0cebe1d92e0b 100644 --- a/drivers/media/dvb/b2c2/flexcop.h +++ b/drivers/media/dvb/b2c2/flexcop.h @@ -26,5 +26,6 @@ extern int b2c2_flexcop_debug; #define deb_i2c(args...) dprintk(0x04,args) #define deb_ts(args...) dprintk(0x08,args) #define deb_sram(args...) dprintk(0x10,args) +#define deb_rdump(args...) dprintk(0x20,args) #endif diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h new file mode 100644 index 000000000000..ed9a6756b194 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop_ibi_value_be.h @@ -0,0 +1,458 @@ +/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * register descriptions + * + * see flexcop.c for copyright information. + */ + +/* This file is automatically generated, do not edit things here. */ +#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ +#define __FLEXCOP_IBI_VALUE_INCLUDED__ + +typedef union { + u32 raw; + + struct { + u32 dma_address0 :30; + u32 dma_0No_update : 1; + u32 dma_0start : 1; + } dma_0x0; + + struct { + u32 dma_addr_size :24; + u32 DMA_maxpackets : 8; + } dma_0x4_remap; + + struct { + u32 dma_addr_size :24; + u32 unused : 1; + u32 dma1timer : 7; + } dma_0x4_read; + + struct { + u32 dma_addr_size :24; + u32 dmatimer : 7; + u32 unused : 1; + } dma_0x4_write; + + struct { + u32 dma_cur_addr :30; + u32 unused : 2; + } dma_0x8; + + struct { + u32 dma_address1 :30; + u32 remap_enable : 1; + u32 dma_1start : 1; + } dma_0xc; + + struct { + u32 st_done : 1; + u32 no_base_addr_ack_error : 1; + u32 twoWS_port_reg : 2; + u32 total_bytes : 2; + u32 twoWS_rw : 1; + u32 working_start : 1; + u32 data1_reg : 8; + u32 baseaddr : 8; + u32 reserved1 : 1; + u32 chipaddr : 7; + } tw_sm_c_100; + + struct { + u32 unused : 6; + u32 force_stop : 1; + u32 exlicit_stops : 1; + u32 data4_reg : 8; + u32 data3_reg : 8; + u32 data2_reg : 8; + } tw_sm_c_104; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_108; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_10c; + + struct { + u32 reserved2 :19; + u32 tlo1 : 5; + u32 reserved1 : 2; + u32 thi1 : 6; + } tw_sm_c_110; + + struct { + u32 LNB_CTLPrescaler_sig : 2; + u32 LNB_CTLLowCount_sig :15; + u32 LNB_CTLHighCount_sig :15; + } lnb_switch_freq_200; + + struct { + u32 Rev_N_sig_reserved2 : 1; + u32 Rev_N_sig_caps : 1; + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_revision_hi : 4; + u32 reserved :20; + u32 Per_reset_sig : 1; + u32 LNB_L_H_sig : 1; + u32 ACPI3_sig : 1; + u32 ACPI1_sig : 1; + } misc_204; + + struct { + u32 unused : 9; + u32 Mailbox_from_V8_Enable_sig : 1; + u32 DMA2_Size_IRQ_Enable_sig : 1; + u32 DMA1_Size_IRQ_Enable_sig : 1; + u32 DMA2_Timer_Enable_sig : 1; + u32 DMA2_IRQ_Enable_sig : 1; + u32 DMA1_Timer_Enable_sig : 1; + u32 DMA1_IRQ_Enable_sig : 1; + u32 Rcv_Data_sig : 1; + u32 MAC_filter_Mode_sig : 1; + u32 Multi2_Enable_sig : 1; + u32 Per_CA_Enable_sig : 1; + u32 SMC_Enable_sig : 1; + u32 CA_Enable_sig : 1; + u32 WAN_CA_Enable_sig : 1; + u32 WAN_Enable_sig : 1; + u32 Mask_filter_sig : 1; + u32 Null_filter_sig : 1; + u32 ECM_filter_sig : 1; + u32 EMM_filter_sig : 1; + u32 PMT_filter_sig : 1; + u32 PCR_filter_sig : 1; + u32 Stream2_filter_sig : 1; + u32 Stream1_filter_sig : 1; + } ctrl_208; + + struct { + u32 reserved :21; + u32 Transport_Error : 1; + u32 LLC_SNAP_FLAG_set : 1; + u32 Continuity_error_flag : 1; + u32 Data_receiver_error : 1; + u32 Mailbox_from_V8_Status_sig : 1; + u32 DMA2_Size_IRQ_Status : 1; + u32 DMA1_Size_IRQ_Status : 1; + u32 DMA2_Timer_Status : 1; + u32 DMA2_IRQ_Status : 1; + u32 DMA1_Timer_Status : 1; + u32 DMA1_IRQ_Status : 1; + } irq_20c; + + struct { + u32 Special_controls :16; + u32 Block_reset_enable : 8; + u32 reset_block_700 : 1; + u32 reset_block_600 : 1; + u32 reset_block_500 : 1; + u32 reset_block_400 : 1; + u32 reset_block_300 : 1; + u32 reset_block_200 : 1; + u32 reset_block_100 : 1; + u32 reset_block_000 : 1; + } sw_reset_210; + + struct { + u32 unused2 :20; + u32 polarity_PS_ERR_sig : 1; + u32 polarity_PS_SYNC_sig : 1; + u32 polarity_PS_VALID_sig : 1; + u32 polarity_PS_CLK_sig : 1; + u32 unused1 : 3; + u32 s2p_sel_sig : 1; + u32 section_pkg_enable_sig : 1; + u32 halt_V8_sig : 1; + u32 v2WS_oe_sig : 1; + u32 vuart_oe_sig : 1; + } misc_214; + + struct { + u32 Mailbox_from_V8 :32; + } mbox_v8_to_host_218; + + struct { + u32 sysramaccess_busmuster : 1; + u32 sysramaccess_write : 1; + u32 unused : 7; + u32 sysramaccess_addr :15; + u32 sysramaccess_data : 8; + } mbox_host_to_v8_21c; + + struct { + u32 debug_fifo_problem : 1; + u32 debug_flag_write_status00 : 1; + u32 Stream2_trans : 1; + u32 Stream2_PID :13; + u32 debug_flag_pid_saved : 1; + u32 MAC_Multicast_filter : 1; + u32 Stream1_trans : 1; + u32 Stream1_PID :13; + } pid_filter_300; + + struct { + u32 reserved : 2; + u32 PMT_trans : 1; + u32 PMT_PID :13; + u32 debug_overrun2 : 1; + u32 debug_overrun3 : 1; + u32 PCR_trans : 1; + u32 PCR_PID :13; + } pid_filter_304; + + struct { + u32 reserved : 2; + u32 ECM_trans : 1; + u32 ECM_PID :13; + u32 EMM_filter_6 : 1; + u32 EMM_filter_4 : 1; + u32 EMM_trans : 1; + u32 EMM_PID :13; + } pid_filter_308; + + struct { + u32 unused2 : 3; + u32 Group_mask :13; + u32 unused1 : 2; + u32 Group_trans : 1; + u32 Group_PID :13; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 unused :15; + u32 net_master_read :17; + } pid_filter_30c_ext_ind_1; + + struct { + u32 unused :15; + u32 net_master_write :17; + } pid_filter_30c_ext_ind_2; + + struct { + u32 unused :15; + u32 next_net_master_write :17; + } pid_filter_30c_ext_ind_3; + + struct { + u32 reserved2 : 5; + u32 stack_read :10; + u32 reserved1 : 6; + u32 state_write :10; + u32 unused1 : 1; + } pid_filter_30c_ext_ind_4; + + struct { + u32 unused :22; + u32 stack_cnt :10; + } pid_filter_30c_ext_ind_5; + + struct { + u32 unused : 4; + u32 data_size_reg :12; + u32 write_status4 : 2; + u32 write_status1 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg0 : 2; + } pid_filter_30c_ext_ind_6; + + struct { + u32 unused :22; + u32 pass_alltables : 1; + u32 AB_select : 1; + u32 extra_index_reg : 3; + u32 index_reg : 5; + } index_reg_310; + + struct { + u32 reserved :17; + u32 PID_enable_bit : 1; + u32 PID_trans : 1; + u32 PID :13; + } pid_n_reg_314; + + struct { + u32 reserved : 6; + u32 HighAB_bit : 1; + u32 Enable_bit : 1; + u32 A6_byte : 8; + u32 A5_byte : 8; + u32 A4_byte : 8; + } mac_low_reg_318; + + struct { + u32 reserved : 8; + u32 A3_byte : 8; + u32 A2_byte : 8; + u32 A1_byte : 8; + } mac_high_reg_31c; + + struct { + u32 data_Tag_ID :16; + u32 reserved :16; + } data_tag_400; + + struct { + u32 Card_IDbyte3 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte6 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte1 : 8; + u32 Card_IDbyte2 : 8; + } card_id_40c; + + struct { + u32 MAC6 : 8; + u32 MAC3 : 8; + u32 MAC2 : 8; + u32 MAC1 : 8; + } mac_address_418; + + struct { + u32 reserved :16; + u32 MAC8 : 8; + u32 MAC7 : 8; + } mac_address_41c; + + struct { + u32 reserved :21; + u32 txbuffempty : 1; + u32 ReceiveByteFrameError : 1; + u32 ReceiveDataReady : 1; + u32 transmitter_data_byte : 8; + } ci_600; + + struct { + u32 pi_component_reg : 3; + u32 pi_rw : 1; + u32 pi_ha :20; + u32 pi_d : 8; + } pi_604; + + struct { + u32 pi_busy_n : 1; + u32 pi_wait_n : 1; + u32 pi_timeout_status : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 config_cclk : 1; + u32 config_cs_n : 1; + u32 config_wr_n : 1; + u32 config_Prog_n : 1; + u32 config_Init_stat : 1; + u32 config_Done_stat : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 pcmcia_a_mod_pwr_n : 1; + u32 reserved : 3; + u32 Timer_addr : 5; + u32 unused : 1; + u32 timer_data : 7; + u32 Timer_Load_req : 1; + u32 Timer_Read_req : 1; + u32 oncecycle_read : 1; + u32 serialReset : 1; + } pi_608; + + struct { + u32 reserved : 6; + u32 rw_flag : 1; + u32 dvb_en : 1; + u32 key_array_row : 5; + u32 key_array_col : 3; + u32 key_code : 2; + u32 key_enable : 1; + u32 PID :13; + } dvb_reg_60c; + + struct { + u32 start_sram_ibi : 1; + u32 reserved2 : 1; + u32 ce_pin_reg : 1; + u32 oe_pin_reg : 1; + u32 reserved1 : 3; + u32 sc_xfer_bit : 1; + u32 sram_data : 8; + u32 sram_rw : 1; + u32 sram_addr :15; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_write :16; + u32 net_addr_read :16; + } net_buf_reg_704; + + struct { + u32 cai_cnt : 4; + u32 reserved2 : 6; + u32 cai_write :11; + u32 reserved1 : 5; + u32 cai_read :11; + } cai_buf_reg_708; + + struct { + u32 cao_cnt : 4; + u32 reserved2 : 6; + u32 cap_write :11; + u32 reserved1 : 5; + u32 cao_read :11; + } cao_buf_reg_70c; + + struct { + u32 media_cnt : 4; + u32 reserved2 : 6; + u32 media_write :11; + u32 reserved1 : 5; + u32 media_read :11; + } media_buf_reg_710; + + struct { + u32 reserved :17; + u32 ctrl_maximumfill : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_usb_wan : 1; + u32 cao_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 net_ovflow_error : 1; + u32 MEDIA_Dest : 2; + u32 CAO_Dest : 2; + u32 CAI_Dest : 2; + u32 NET_Dest : 2; + } sram_dest_reg_714; + + struct { + u32 reserved3 :11; + u32 net_addr_write : 1; + u32 reserved2 : 3; + u32 net_addr_read : 1; + u32 reserved1 : 4; + u32 net_cnt :12; + } net_buf_reg_718; + + struct { + u32 reserved3 : 4; + u32 wan_pkt_frame : 4; + u32 reserved2 : 4; + u32 sram_memmap : 2; + u32 sram_chip : 2; + u32 wan_wait_state : 8; + u32 reserved1 : 6; + u32 wan_speed_sig : 2; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +#endif diff --git a/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h new file mode 100644 index 000000000000..49f2315b6e58 --- /dev/null +++ b/drivers/media/dvb/b2c2/flexcop_ibi_value_le.h @@ -0,0 +1,458 @@ +/* This file is part of linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III + * + * register descriptions + * + * see flexcop.c for copyright information. + */ + +/* This file is automatically generated, do not edit things here. */ +#ifndef __FLEXCOP_IBI_VALUE_INCLUDED__ +#define __FLEXCOP_IBI_VALUE_INCLUDED__ + +typedef union { + u32 raw; + + struct { + u32 dma_0start : 1; + u32 dma_0No_update : 1; + u32 dma_address0 :30; + } dma_0x0; + + struct { + u32 DMA_maxpackets : 8; + u32 dma_addr_size :24; + } dma_0x4_remap; + + struct { + u32 dma1timer : 7; + u32 unused : 1; + u32 dma_addr_size :24; + } dma_0x4_read; + + struct { + u32 unused : 1; + u32 dmatimer : 7; + u32 dma_addr_size :24; + } dma_0x4_write; + + struct { + u32 unused : 2; + u32 dma_cur_addr :30; + } dma_0x8; + + struct { + u32 dma_1start : 1; + u32 remap_enable : 1; + u32 dma_address1 :30; + } dma_0xc; + + struct { + u32 chipaddr : 7; + u32 reserved1 : 1; + u32 baseaddr : 8; + u32 data1_reg : 8; + u32 working_start : 1; + u32 twoWS_rw : 1; + u32 total_bytes : 2; + u32 twoWS_port_reg : 2; + u32 no_base_addr_ack_error : 1; + u32 st_done : 1; + } tw_sm_c_100; + + struct { + u32 data2_reg : 8; + u32 data3_reg : 8; + u32 data4_reg : 8; + u32 exlicit_stops : 1; + u32 force_stop : 1; + u32 unused : 6; + } tw_sm_c_104; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_108; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_10c; + + struct { + u32 thi1 : 6; + u32 reserved1 : 2; + u32 tlo1 : 5; + u32 reserved2 :19; + } tw_sm_c_110; + + struct { + u32 LNB_CTLHighCount_sig :15; + u32 LNB_CTLLowCount_sig :15; + u32 LNB_CTLPrescaler_sig : 2; + } lnb_switch_freq_200; + + struct { + u32 ACPI1_sig : 1; + u32 ACPI3_sig : 1; + u32 LNB_L_H_sig : 1; + u32 Per_reset_sig : 1; + u32 reserved :20; + u32 Rev_N_sig_revision_hi : 4; + u32 Rev_N_sig_reserved1 : 2; + u32 Rev_N_sig_caps : 1; + u32 Rev_N_sig_reserved2 : 1; + } misc_204; + + struct { + u32 Stream1_filter_sig : 1; + u32 Stream2_filter_sig : 1; + u32 PCR_filter_sig : 1; + u32 PMT_filter_sig : 1; + u32 EMM_filter_sig : 1; + u32 ECM_filter_sig : 1; + u32 Null_filter_sig : 1; + u32 Mask_filter_sig : 1; + u32 WAN_Enable_sig : 1; + u32 WAN_CA_Enable_sig : 1; + u32 CA_Enable_sig : 1; + u32 SMC_Enable_sig : 1; + u32 Per_CA_Enable_sig : 1; + u32 Multi2_Enable_sig : 1; + u32 MAC_filter_Mode_sig : 1; + u32 Rcv_Data_sig : 1; + u32 DMA1_IRQ_Enable_sig : 1; + u32 DMA1_Timer_Enable_sig : 1; + u32 DMA2_IRQ_Enable_sig : 1; + u32 DMA2_Timer_Enable_sig : 1; + u32 DMA1_Size_IRQ_Enable_sig : 1; + u32 DMA2_Size_IRQ_Enable_sig : 1; + u32 Mailbox_from_V8_Enable_sig : 1; + u32 unused : 9; + } ctrl_208; + + struct { + u32 DMA1_IRQ_Status : 1; + u32 DMA1_Timer_Status : 1; + u32 DMA2_IRQ_Status : 1; + u32 DMA2_Timer_Status : 1; + u32 DMA1_Size_IRQ_Status : 1; + u32 DMA2_Size_IRQ_Status : 1; + u32 Mailbox_from_V8_Status_sig : 1; + u32 Data_receiver_error : 1; + u32 Continuity_error_flag : 1; + u32 LLC_SNAP_FLAG_set : 1; + u32 Transport_Error : 1; + u32 reserved :21; + } irq_20c; + + struct { + u32 reset_block_000 : 1; + u32 reset_block_100 : 1; + u32 reset_block_200 : 1; + u32 reset_block_300 : 1; + u32 reset_block_400 : 1; + u32 reset_block_500 : 1; + u32 reset_block_600 : 1; + u32 reset_block_700 : 1; + u32 Block_reset_enable : 8; + u32 Special_controls :16; + } sw_reset_210; + + struct { + u32 vuart_oe_sig : 1; + u32 v2WS_oe_sig : 1; + u32 halt_V8_sig : 1; + u32 section_pkg_enable_sig : 1; + u32 s2p_sel_sig : 1; + u32 unused1 : 3; + u32 polarity_PS_CLK_sig : 1; + u32 polarity_PS_VALID_sig : 1; + u32 polarity_PS_SYNC_sig : 1; + u32 polarity_PS_ERR_sig : 1; + u32 unused2 :20; + } misc_214; + + struct { + u32 Mailbox_from_V8 :32; + } mbox_v8_to_host_218; + + struct { + u32 sysramaccess_data : 8; + u32 sysramaccess_addr :15; + u32 unused : 7; + u32 sysramaccess_write : 1; + u32 sysramaccess_busmuster : 1; + } mbox_host_to_v8_21c; + + struct { + u32 Stream1_PID :13; + u32 Stream1_trans : 1; + u32 MAC_Multicast_filter : 1; + u32 debug_flag_pid_saved : 1; + u32 Stream2_PID :13; + u32 Stream2_trans : 1; + u32 debug_flag_write_status00 : 1; + u32 debug_fifo_problem : 1; + } pid_filter_300; + + struct { + u32 PCR_PID :13; + u32 PCR_trans : 1; + u32 debug_overrun3 : 1; + u32 debug_overrun2 : 1; + u32 PMT_PID :13; + u32 PMT_trans : 1; + u32 reserved : 2; + } pid_filter_304; + + struct { + u32 EMM_PID :13; + u32 EMM_trans : 1; + u32 EMM_filter_4 : 1; + u32 EMM_filter_6 : 1; + u32 ECM_PID :13; + u32 ECM_trans : 1; + u32 reserved : 2; + } pid_filter_308; + + struct { + u32 Group_PID :13; + u32 Group_trans : 1; + u32 unused1 : 2; + u32 Group_mask :13; + u32 unused2 : 3; + } pid_filter_30c_ext_ind_0_7; + + struct { + u32 net_master_read :17; + u32 unused :15; + } pid_filter_30c_ext_ind_1; + + struct { + u32 net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_2; + + struct { + u32 next_net_master_write :17; + u32 unused :15; + } pid_filter_30c_ext_ind_3; + + struct { + u32 unused1 : 1; + u32 state_write :10; + u32 reserved1 : 6; + u32 stack_read :10; + u32 reserved2 : 5; + } pid_filter_30c_ext_ind_4; + + struct { + u32 stack_cnt :10; + u32 unused :22; + } pid_filter_30c_ext_ind_5; + + struct { + u32 pid_fsm_save_reg0 : 2; + u32 pid_fsm_save_reg1 : 2; + u32 pid_fsm_save_reg2 : 2; + u32 pid_fsm_save_reg3 : 2; + u32 pid_fsm_save_reg4 : 2; + u32 pid_fsm_save_reg300 : 2; + u32 write_status1 : 2; + u32 write_status4 : 2; + u32 data_size_reg :12; + u32 unused : 4; + } pid_filter_30c_ext_ind_6; + + struct { + u32 index_reg : 5; + u32 extra_index_reg : 3; + u32 AB_select : 1; + u32 pass_alltables : 1; + u32 unused :22; + } index_reg_310; + + struct { + u32 PID :13; + u32 PID_trans : 1; + u32 PID_enable_bit : 1; + u32 reserved :17; + } pid_n_reg_314; + + struct { + u32 A4_byte : 8; + u32 A5_byte : 8; + u32 A6_byte : 8; + u32 Enable_bit : 1; + u32 HighAB_bit : 1; + u32 reserved : 6; + } mac_low_reg_318; + + struct { + u32 A1_byte : 8; + u32 A2_byte : 8; + u32 A3_byte : 8; + u32 reserved : 8; + } mac_high_reg_31c; + + struct { + u32 reserved :16; + u32 data_Tag_ID :16; + } data_tag_400; + + struct { + u32 Card_IDbyte6 : 8; + u32 Card_IDbyte5 : 8; + u32 Card_IDbyte4 : 8; + u32 Card_IDbyte3 : 8; + } card_id_408; + + struct { + u32 Card_IDbyte2 : 8; + u32 Card_IDbyte1 : 8; + } card_id_40c; + + struct { + u32 MAC1 : 8; + u32 MAC2 : 8; + u32 MAC3 : 8; + u32 MAC6 : 8; + } mac_address_418; + + struct { + u32 MAC7 : 8; + u32 MAC8 : 8; + u32 reserved :16; + } mac_address_41c; + + struct { + u32 transmitter_data_byte : 8; + u32 ReceiveDataReady : 1; + u32 ReceiveByteFrameError : 1; + u32 txbuffempty : 1; + u32 reserved :21; + } ci_600; + + struct { + u32 pi_d : 8; + u32 pi_ha :20; + u32 pi_rw : 1; + u32 pi_component_reg : 3; + } pi_604; + + struct { + u32 serialReset : 1; + u32 oncecycle_read : 1; + u32 Timer_Read_req : 1; + u32 Timer_Load_req : 1; + u32 timer_data : 7; + u32 unused : 1; + u32 Timer_addr : 5; + u32 reserved : 3; + u32 pcmcia_a_mod_pwr_n : 1; + u32 pcmcia_b_mod_pwr_n : 1; + u32 config_Done_stat : 1; + u32 config_Init_stat : 1; + u32 config_Prog_n : 1; + u32 config_wr_n : 1; + u32 config_cs_n : 1; + u32 config_cclk : 1; + u32 pi_CiMax_IRQ_n : 1; + u32 pi_timeout_status : 1; + u32 pi_wait_n : 1; + u32 pi_busy_n : 1; + } pi_608; + + struct { + u32 PID :13; + u32 key_enable : 1; + u32 key_code : 2; + u32 key_array_col : 3; + u32 key_array_row : 5; + u32 dvb_en : 1; + u32 rw_flag : 1; + u32 reserved : 6; + } dvb_reg_60c; + + struct { + u32 sram_addr :15; + u32 sram_rw : 1; + u32 sram_data : 8; + u32 sc_xfer_bit : 1; + u32 reserved1 : 3; + u32 oe_pin_reg : 1; + u32 ce_pin_reg : 1; + u32 reserved2 : 1; + u32 start_sram_ibi : 1; + } sram_ctrl_reg_700; + + struct { + u32 net_addr_read :16; + u32 net_addr_write :16; + } net_buf_reg_704; + + struct { + u32 cai_read :11; + u32 reserved1 : 5; + u32 cai_write :11; + u32 reserved2 : 6; + u32 cai_cnt : 4; + } cai_buf_reg_708; + + struct { + u32 cao_read :11; + u32 reserved1 : 5; + u32 cap_write :11; + u32 reserved2 : 6; + u32 cao_cnt : 4; + } cao_buf_reg_70c; + + struct { + u32 media_read :11; + u32 reserved1 : 5; + u32 media_write :11; + u32 reserved2 : 6; + u32 media_cnt : 4; + } media_buf_reg_710; + + struct { + u32 NET_Dest : 2; + u32 CAI_Dest : 2; + u32 CAO_Dest : 2; + u32 MEDIA_Dest : 2; + u32 net_ovflow_error : 1; + u32 media_ovflow_error : 1; + u32 cai_ovflow_error : 1; + u32 cao_ovflow_error : 1; + u32 ctrl_usb_wan : 1; + u32 ctrl_sramdma : 1; + u32 ctrl_maximumfill : 1; + u32 reserved :17; + } sram_dest_reg_714; + + struct { + u32 net_cnt :12; + u32 reserved1 : 4; + u32 net_addr_read : 1; + u32 reserved2 : 3; + u32 net_addr_write : 1; + u32 reserved3 :11; + } net_buf_reg_718; + + struct { + u32 wan_speed_sig : 2; + u32 reserved1 : 6; + u32 wan_wait_state : 8; + u32 sram_chip : 2; + u32 sram_memmap : 2; + u32 reserved2 : 4; + u32 wan_pkt_frame : 4; + u32 reserved3 : 4; + } wan_ctrl_reg_71c; +} flexcop_ibi_value; + +#endif diff --git a/drivers/media/dvb/b2c2/skystar2.c b/drivers/media/dvb/b2c2/skystar2.c deleted file mode 100644 index acbc4c34f72a..000000000000 --- a/drivers/media/dvb/b2c2/skystar2.c +++ /dev/null @@ -1,2644 +0,0 @@ -/* - * skystar2.c - driver for the Technisat SkyStar2 PCI DVB card - * based on the FlexCopII by B2C2,Inc. - * - * Copyright (C) 2003 Vadim Catana, skystar@moldova.cc - * - * FIX: DISEQC Tone Burst in flexcop_diseqc_ioctl() - * FIX: FULL soft DiSEqC for skystar2 (FlexCopII rev 130) VP310 equipped - * Vincenzo Di Massa, hawk.it at tiscalinet.it - * - * Converted to Linux coding style - * Misc reorganization, polishing, restyling - * Roberto Ragusa, skystar2-c5b8 at robertoragusa dot it - * - * Added hardware filtering support, - * Niklas Peinecke, peinecke at gdv.uni-hannover.de - * - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU Lesser General Public License - * as published by the Free Software Foundation; either version 2.1 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU Lesser General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - */ - -#include <linux/module.h> -#include <linux/moduleparam.h> -#include <linux/delay.h> -#include <linux/pci.h> -#include <linux/init.h> -#include <linux/version.h> - -#include <asm/io.h> - -#include "dvb_frontend.h" - -#include <linux/dvb/frontend.h> -#include <linux/dvb/dmx.h> -#include "dvb_demux.h" -#include "dmxdev.h" -#include "dvb_filter.h" -#include "dvbdev.h" -#include "demux.h" -#include "dvb_net.h" -#include "stv0299.h" -#include "mt352.h" -#include "mt312.h" -#include "nxt2002.h" - -static int debug; -static int enable_hw_filters = 2; - -module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "Set debugging level (0 = default, 1 = most messages, 2 = all messages)."); -module_param(enable_hw_filters, int, 0444); -MODULE_PARM_DESC(enable_hw_filters, "enable hardware filters: supported values: 0 (none), 1, 2"); - -#define dprintk(x...) do { if (debug>=1) printk(x); } while (0) -#define ddprintk(x...) do { if (debug>=2) printk(x); } while (0) - -#define SIZE_OF_BUF_DMA1 0x3ac00 -#define SIZE_OF_BUF_DMA2 0x758 - -#define MAX_N_HW_FILTERS (6+32) -#define N_PID_SLOTS 256 - -struct dmaq { - u32 bus_addr; - u32 head; - u32 tail; - u32 buffer_size; - u8 *buffer; -}; - -#if LINUX_VERSION_CODE < KERNEL_VERSION(2,6,9) -#define __iomem -#endif - -struct adapter { - struct pci_dev *pdev; - - u8 card_revision; - u32 b2c2_revision; - u32 pid_filter_max; - u32 mac_filter_max; - u32 irq; - void __iomem *io_mem; - unsigned long io_port; - u8 mac_addr[8]; - u32 dw_sram_type; - - struct dvb_adapter dvb_adapter; - struct dvb_demux demux; - struct dmxdev dmxdev; - struct dmx_frontend hw_frontend; - struct dmx_frontend mem_frontend; - struct i2c_adapter i2c_adap; - struct dvb_net dvbnet; - - struct semaphore i2c_sem; - - struct dmaq dmaq1; - struct dmaq dmaq2; - - u32 dma_ctrl; - u32 dma_status; - - int capturing; - - spinlock_t lock; - - int useable_hw_filters; - u16 hw_pids[MAX_N_HW_FILTERS]; - u16 pid_list[N_PID_SLOTS]; - int pid_rc[N_PID_SLOTS]; // ref counters for the pids - int pid_count; - int whole_bandwidth_count; - u32 mac_filter; - - struct dvb_frontend* fe; - int (*fe_sleep)(struct dvb_frontend* fe); -}; - -#define write_reg_dw(adapter,reg,value) writel(value, adapter->io_mem + reg) -#define read_reg_dw(adapter,reg) readl(adapter->io_mem + reg) - -static void write_reg_bitfield(struct adapter *adapter, u32 reg, u32 zeromask, u32 orvalue) -{ - u32 tmp; - - tmp = read_reg_dw(adapter, reg); - tmp = (tmp & ~zeromask) | orvalue; - write_reg_dw(adapter, reg, tmp); -} - -/* i2c functions */ -static int i2c_main_write_for_flex2(struct adapter *adapter, u32 command, u8 *buf, int retries) -{ - int i; - u32 value; - - write_reg_dw(adapter, 0x100, 0); - write_reg_dw(adapter, 0x100, command); - - for (i = 0; i < retries; i++) { - value = read_reg_dw(adapter, 0x100); - - if ((value & 0x40000000) == 0) { - if ((value & 0x81000000) == 0x80000000) { - if (buf != 0) - *buf = (value >> 0x10) & 0xff; - - return 1; - } - } else { - write_reg_dw(adapter, 0x100, 0); - write_reg_dw(adapter, 0x100, command); - } - } - - return 0; -} - -/* device = 0x10000000 for tuner, 0x20000000 for eeprom */ -static void i2c_main_setup(u32 device, u32 chip_addr, u8 op, u8 addr, u32 value, u32 len, u32 *command) -{ - *command = device | ((len - 1) << 26) | (value << 16) | (addr << 8) | chip_addr; - - if (op != 0) - *command = *command | 0x03000000; - else - *command = *command | 0x01000000; -} - -static int flex_i2c_read4(struct adapter *adapter, u32 device, u32 chip_addr, u16 addr, u8 *buf, u8 len) -{ - u32 command; - u32 value; - - int result, i; - - i2c_main_setup(device, chip_addr, 1, addr, 0, len, &command); - - result = i2c_main_write_for_flex2(adapter, command, buf, 100000); - - if ((result & 0xff) != 0) { - if (len > 1) { - value = read_reg_dw(adapter, 0x104); - - for (i = 1; i < len; i++) { - buf[i] = value & 0xff; - value = value >> 8; - } - } - } - - return result; -} - -static int flex_i2c_write4(struct adapter *adapter, u32 device, u32 chip_addr, u32 addr, u8 *buf, u8 len) -{ - u32 command; - u32 value; - int i; - - if (len > 1) { - value = 0; - - for (i = len; i > 1; i--) { - value = value << 8; - value = value | buf[i - 1]; - } - - write_reg_dw(adapter, 0x104, value); - } - - i2c_main_setup(device, chip_addr, 0, addr, buf[0], len, &command); - - return i2c_main_write_for_flex2(adapter, command, NULL, 100000); -} - -static void fixchipaddr(u32 device, u32 bus, u32 addr, u32 *ret) -{ - if (device == 0x20000000) - *ret = bus | ((addr >> 8) & 3); - else - *ret = bus; -} - -static u32 flex_i2c_read(struct adapter *adapter, u32 device, u32 bus, u32 addr, u8 *buf, u32 len) -{ - u32 chipaddr; - u32 bytes_to_transfer; - u8 *start; - - ddprintk("%s:\n", __FUNCTION__); - - start = buf; - - while (len != 0) { - bytes_to_transfer = len; - - if (bytes_to_transfer > 4) - bytes_to_transfer = 4; - - fixchipaddr(device, bus, addr, &chipaddr); - - if (flex_i2c_read4(adapter, device, chipaddr, addr, buf, bytes_to_transfer) == 0) - return buf - start; - - buf = buf + bytes_to_transfer; - addr = addr + bytes_to_transfer; - len = len - bytes_to_transfer; - }; - - return buf - start; -} - -static u32 flex_i2c_write(struct adapter *adapter, u32 device, u32 bus, u32 addr, u8 *buf, u32 len) -{ - u32 chipaddr; - u32 bytes_to_transfer; - u8 *start; - - ddprintk("%s:\n", __FUNCTION__); - - start = buf; - - while (len != 0) { - bytes_to_transfer = len; - - if (bytes_to_transfer > 4) - bytes_to_transfer = 4; - - fixchipaddr(device, bus, addr, &chipaddr); - - if (flex_i2c_write4(adapter, device, chipaddr, addr, buf, bytes_to_transfer) == 0) - return buf - start; - - buf = buf + bytes_to_transfer; - addr = addr + bytes_to_transfer; - len = len - bytes_to_transfer; - } - - return buf - start; -} - -static int master_xfer(struct i2c_adapter* adapter, struct i2c_msg *msgs, int num) -{ - struct adapter *tmp = i2c_get_adapdata(adapter); - int i, ret = 0; - - if (down_interruptible(&tmp->i2c_sem)) - return -ERESTARTSYS; - - ddprintk("%s: %d messages to transfer\n", __FUNCTION__, num); - - for (i = 0; i < num; i++) { - ddprintk("message %d: flags=0x%x, addr=0x%x, buf=0x%x, len=%d \n", i, - msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len); - } - - // read command - if ((num == 2) && (msgs[0].flags == 0) && (msgs[1].flags == I2C_M_RD) && (msgs[0].buf != NULL) && (msgs[1].buf != NULL)) { - - ret = flex_i2c_read(tmp, 0x10000000, msgs[0].addr, msgs[0].buf[0], msgs[1].buf, msgs[1].len); - - up(&tmp->i2c_sem); - - if (ret != msgs[1].len) { - dprintk("%s: read error !\n", __FUNCTION__); - - for (i = 0; i < 2; i++) { - dprintk("message %d: flags=0x%x, addr=0x%x, buf=0x%x, len=%d \n", i, - msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len); - } - - return -EREMOTEIO; - } - - return num; - } - // write command - for (i = 0; i < num; i++) { - - if ((msgs[i].flags != 0) || (msgs[i].buf == NULL) || (msgs[i].len < 2)) - return -EINVAL; - - ret = flex_i2c_write(tmp, 0x10000000, msgs[i].addr, msgs[i].buf[0], &msgs[i].buf[1], msgs[i].len - 1); - - up(&tmp->i2c_sem); - - if (ret != msgs[0].len - 1) { - dprintk("%s: write error %i !\n", __FUNCTION__, ret); - - dprintk("message %d: flags=0x%x, addr=0x%x, buf[0]=0x%x, len=%d \n", i, - msgs[i].flags, msgs[i].addr, msgs[i].buf[0], msgs[i].len); - - return -EREMOTEIO; - } - - return num; - } - - printk("%s: unknown command format !\n", __FUNCTION__); - - return -EINVAL; -} - -/* SRAM (Skystar2 rev2.3 has one "ISSI IS61LV256" chip on board, - but it seems that FlexCopII can work with more than one chip) */ -static void sram_set_net_dest(struct adapter *adapter, u8 dest) -{ - u32 tmp; - - udelay(1000); - - tmp = (read_reg_dw(adapter, 0x714) & 0xfffffffc) | (dest & 3); - - udelay(1000); - - write_reg_dw(adapter, 0x714, tmp); - write_reg_dw(adapter, 0x714, tmp); - - udelay(1000); - - /* return value is never used? */ -/* return tmp; */ -} - -static void sram_set_cai_dest(struct adapter *adapter, u8 dest) -{ - u32 tmp; - - udelay(1000); - - tmp = (read_reg_dw(adapter, 0x714) & 0xfffffff3) | ((dest & 3) << 2); - - udelay(1000); - udelay(1000); - - write_reg_dw(adapter, 0x714, tmp); - write_reg_dw(adapter, 0x714, tmp); - - udelay(1000); - - /* return value is never used? */ -/* return tmp; */ -} - -static void sram_set_cao_dest(struct adapter *adapter, u8 dest) -{ - u32 tmp; - - udelay(1000); - - tmp = (read_reg_dw(adapter, 0x714) & 0xffffffcf) | ((dest & 3) << 4); - - udelay(1000); - udelay(1000); - - write_reg_dw(adapter, 0x714, tmp); - write_reg_dw(adapter, 0x714, tmp); - - udelay(1000); - - /* return value is never used? */ -/* return tmp; */ -} - -static void sram_set_media_dest(struct adapter *adapter, u8 dest) -{ - u32 tmp; - - udelay(1000); - - tmp = (read_reg_dw(adapter, 0x714) & 0xffffff3f) | ((dest & 3) << 6); - - udelay(1000); - udelay(1000); - - write_reg_dw(adapter, 0x714, tmp); - write_reg_dw(adapter, 0x714, tmp); - - udelay(1000); - - /* return value is never used? */ -/* return tmp; */ -} - -/* SRAM memory is accessed through a buffer register in the FlexCop - chip (0x700). This register has the following structure: - bits 0-14 : address - bit 15 : read/write flag - bits 16-23 : 8-bit word to write - bits 24-27 : = 4 - bits 28-29 : memory bank selector - bit 31 : busy flag -*/ -static void flex_sram_write(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) -{ - int i, retries; - u32 command; - - for (i = 0; i < len; i++) { - command = bank | addr | 0x04000000 | (*buf << 0x10); - - retries = 2; - - while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { - mdelay(1); - retries--; - }; - - if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); - - write_reg_dw(adapter, 0x700, command); - - buf++; - addr++; - } -} - -static void flex_sram_read(struct adapter *adapter, u32 bank, u32 addr, u8 *buf, u32 len) -{ - int i, retries; - u32 command, value; - - for (i = 0; i < len; i++) { - command = bank | addr | 0x04008000; - - retries = 10000; - - while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { - mdelay(1); - retries--; - }; - - if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); - - write_reg_dw(adapter, 0x700, command); - - retries = 10000; - - while (((read_reg_dw(adapter, 0x700) & 0x80000000) != 0) && (retries > 0)) { - mdelay(1); - retries--; - }; - - if (retries == 0) - printk("%s: SRAM timeout\n", __FUNCTION__); - - value = read_reg_dw(adapter, 0x700) >> 0x10; - - *buf = (value & 0xff); - - addr++; - buf++; - } -} - -static void sram_write_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) -{ - u32 bank; - - bank = 0; - - if (adapter->dw_sram_type == 0x20000) { - bank = (addr & 0x18000) << 0x0d; - } - - if (adapter->dw_sram_type == 0x00000) { - if ((addr >> 0x0f) == 0) - bank = 0x20000000; - else - bank = 0x10000000; - } - - flex_sram_write(adapter, bank, addr & 0x7fff, buf, len); -} - -static void sram_read_chunk(struct adapter *adapter, u32 addr, u8 *buf, u16 len) -{ - u32 bank; - - bank = 0; - - if (adapter->dw_sram_type == 0x20000) { - bank = (addr & 0x18000) << 0x0d; - } - - if (adapter->dw_sram_type == 0x00000) { - if ((addr >> 0x0f) == 0) - bank = 0x20000000; - else - bank = 0x10000000; - } - - flex_sram_read(adapter, bank, addr & 0x7fff, buf, len); -} - -static void sram_read(struct adapter *adapter, u32 addr, u8 *buf, u32 len) -{ - u32 length; - - while (len != 0) { - length = len; - - // check if the address range belongs to the same - // 32K memory chip. If not, the data is read from - // one chip at a time. - if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { - length = (((addr >> 0x0f) + 1) << 0x0f) - addr; - } - - sram_read_chunk(adapter, addr, buf, length); - - addr = addr + length; - buf = buf + length; - len = len - length; - } -} - -static void sram_write(struct adapter *adapter, u32 addr, u8 *buf, u32 len) -{ - u32 length; - - while (len != 0) { - length = len; - - // check if the address range belongs to the same - // 32K memory chip. If not, the data is written to - // one chip at a time. - if ((addr >> 0x0f) != ((addr + len - 1) >> 0x0f)) { - length = (((addr >> 0x0f) + 1) << 0x0f) - addr; - } - - sram_write_chunk(adapter, addr, buf, length); - - addr = addr + length; - buf = buf + length; - len = len - length; - } -} - -static void sram_set_size(struct adapter *adapter, u32 mask) -{ - write_reg_dw(adapter, 0x71c, (mask | (~0x30000 & read_reg_dw(adapter, 0x71c)))); -} - -static void sram_init(struct adapter *adapter) -{ - u32 tmp; - - tmp = read_reg_dw(adapter, 0x71c); - - write_reg_dw(adapter, 0x71c, 1); - - if (read_reg_dw(adapter, 0x71c) != 0) { - write_reg_dw(adapter, 0x71c, tmp); - - adapter->dw_sram_type = tmp & 0x30000; - - ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); - - } else { - - adapter->dw_sram_type = 0x10000; - - ddprintk("%s: dw_sram_type = %x\n", __FUNCTION__, adapter->dw_sram_type); - } - - /* return value is never used? */ -/* return adapter->dw_sram_type; */ -} - -static int sram_test_location(struct adapter *adapter, u32 mask, u32 addr) -{ - u8 tmp1, tmp2; - - dprintk("%s: mask = %x, addr = %x\n", __FUNCTION__, mask, addr); - - sram_set_size(adapter, mask); - sram_init(adapter); - - tmp2 = 0xa5; - tmp1 = 0x4f; - - sram_write(adapter, addr, &tmp2, 1); - sram_write(adapter, addr + 4, &tmp1, 1); - - tmp2 = 0; - - mdelay(20); - - sram_read(adapter, addr, &tmp2, 1); - sram_read(adapter, addr, &tmp2, 1); - - dprintk("%s: wrote 0xa5, read 0x%2x\n", __FUNCTION__, tmp2); - - if (tmp2 != 0xa5) - return 0; - - tmp2 = 0x5a; - tmp1 = 0xf4; - - sram_write(adapter, addr, &tmp2, 1); - sram_write(adapter, addr + 4, &tmp1, 1); - - tmp2 = 0; - - mdelay(20); - - sram_read(adapter, addr, &tmp2, 1); - sram_read(adapter, addr, &tmp2, 1); - - dprintk("%s: wrote 0x5a, read 0x%2x\n", __FUNCTION__, tmp2); - - if (tmp2 != 0x5a) - return 0; - - return 1; -} - -static u32 sram_length(struct adapter *adapter) -{ - if (adapter->dw_sram_type == 0x10000) - return 32768; // 32K - if (adapter->dw_sram_type == 0x00000) - return 65536; // 64K - if (adapter->dw_sram_type == 0x20000) - return 131072; // 128K - - return 32768; // 32K -} - -/* FlexcopII can work with 32K, 64K or 128K of external SRAM memory. - - for 128K there are 4x32K chips at bank 0,1,2,3. - - for 64K there are 2x32K chips at bank 1,2. - - for 32K there is one 32K chip at bank 0. - - FlexCop works only with one bank at a time. The bank is selected - by bits 28-29 of the 0x700 register. - - bank 0 covers addresses 0x00000-0x07fff - bank 1 covers addresses 0x08000-0x0ffff - bank 2 covers addresses 0x10000-0x17fff - bank 3 covers addresses 0x18000-0x1ffff -*/ -static int sram_detect_for_flex2(struct adapter *adapter) -{ - u32 tmp, tmp2, tmp3; - - dprintk("%s:\n", __FUNCTION__); - - tmp = read_reg_dw(adapter, 0x208); - write_reg_dw(adapter, 0x208, 0); - - tmp2 = read_reg_dw(adapter, 0x71c); - - dprintk("%s: tmp2 = %x\n", __FUNCTION__, tmp2); - - write_reg_dw(adapter, 0x71c, 1); - - tmp3 = read_reg_dw(adapter, 0x71c); - - dprintk("%s: tmp3 = %x\n", __FUNCTION__, tmp3); - - write_reg_dw(adapter, 0x71c, tmp2); - - // check for internal SRAM ??? - tmp3--; - if (tmp3 != 0) { - sram_set_size(adapter, 0x10000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: sram size = 32K\n", __FUNCTION__); - - return 32; - } - - if (sram_test_location(adapter, 0x20000, 0x18000) != 0) { - sram_set_size(adapter, 0x20000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: sram size = 128K\n", __FUNCTION__); - - return 128; - } - - if (sram_test_location(adapter, 0x00000, 0x10000) != 0) { - sram_set_size(adapter, 0x00000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: sram size = 64K\n", __FUNCTION__); - - return 64; - } - - if (sram_test_location(adapter, 0x10000, 0x00000) != 0) { - sram_set_size(adapter, 0x10000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: sram size = 32K\n", __FUNCTION__); - - return 32; - } - - sram_set_size(adapter, 0x10000); - sram_init(adapter); - write_reg_dw(adapter, 0x208, tmp); - - dprintk("%s: SRAM detection failed. Set to 32K \n", __FUNCTION__); - - return 0; -} - -static void sll_detect_sram_size(struct adapter *adapter) -{ - sram_detect_for_flex2(adapter); -} - -/* EEPROM (Skystar2 has one "24LC08B" chip on board) */ -/* -static int eeprom_write(struct adapter *adapter, u16 addr, u8 *buf, u16 len) -{ - return flex_i2c_write(adapter, 0x20000000, 0x50, addr, buf, len); -} -*/ - -static int eeprom_read(struct adapter *adapter, u16 addr, u8 *buf, u16 len) -{ - return flex_i2c_read(adapter, 0x20000000, 0x50, addr, buf, len); -} - -static u8 calc_lrc(u8 *buf, int len) -{ - int i; - u8 sum; - - sum = 0; - - for (i = 0; i < len; i++) - sum = sum ^ buf[i]; - - return sum; -} - -static int eeprom_lrc_read(struct adapter *adapter, u32 addr, u32 len, u8 *buf, int retries) -{ - int i; - - for (i = 0; i < retries; i++) { - if (eeprom_read(adapter, addr, buf, len) == len) { - if (calc_lrc(buf, len - 1) == buf[len - 1]) - return 1; - } - } - - return 0; -} - -/* -static int eeprom_lrc_write(struct adapter *adapter, u32 addr, u32 len, u8 *wbuf, u8 *rbuf, int retries) -{ - int i; - - for (i = 0; i < retries; i++) { - if (eeprom_write(adapter, addr, wbuf, len) == len) { - if (eeprom_lrc_read(adapter, addr, len, rbuf, retries) == 1) - return 1; - } - } - - return 0; -} -*/ - - -/* These functions could be used to unlock SkyStar2 cards. */ - -/* -static int eeprom_writeKey(struct adapter *adapter, u8 *key, u32 len) -{ - u8 rbuf[20]; - u8 wbuf[20]; - - if (len != 16) - return 0; - - memcpy(wbuf, key, len); - - wbuf[16] = 0; - wbuf[17] = 0; - wbuf[18] = 0; - wbuf[19] = calc_lrc(wbuf, 19); - - return eeprom_lrc_write(adapter, 0x3e4, 20, wbuf, rbuf, 4); -} - -static int eeprom_readKey(struct adapter *adapter, u8 *key, u32 len) -{ - u8 buf[20]; - - if (len != 16) - return 0; - - if (eeprom_lrc_read(adapter, 0x3e4, 20, buf, 4) == 0) - return 0; - - memcpy(key, buf, len); - - return 1; -} -*/ - -static int eeprom_get_mac_addr(struct adapter *adapter, char type, u8 *mac) -{ - u8 tmp[8]; - - if (eeprom_lrc_read(adapter, 0x3f8, 8, tmp, 4) != 0) { - if (type != 0) { - mac[0] = tmp[0]; - mac[1] = tmp[1]; - mac[2] = tmp[2]; - mac[3] = 0xfe; - mac[4] = 0xff; - mac[5] = tmp[3]; - mac[6] = tmp[4]; - mac[7] = tmp[5]; - - } else { - - mac[0] = tmp[0]; - mac[1] = tmp[1]; - mac[2] = tmp[2]; - mac[3] = tmp[3]; - mac[4] = tmp[4]; - mac[5] = tmp[5]; - } - - return 1; - - } else { - - if (type == 0) { - memset(mac, 0, 6); - - } else { - - memset(mac, 0, 8); - } - - return 0; - } -} - -/* -static char eeprom_set_mac_addr(struct adapter *adapter, char type, u8 *mac) -{ - u8 tmp[8]; - - if (type != 0) { - tmp[0] = mac[0]; - tmp[1] = mac[1]; - tmp[2] = mac[2]; - tmp[3] = mac[5]; - tmp[4] = mac[6]; - tmp[5] = mac[7]; - - } else { - - tmp[0] = mac[0]; - tmp[1] = mac[1]; - tmp[2] = mac[2]; - tmp[3] = mac[3]; - tmp[4] = mac[4]; - tmp[5] = mac[5]; - } - - tmp[6] = 0; - tmp[7] = calc_lrc(tmp, 7); - - if (eeprom_write(adapter, 0x3f8, tmp, 8) == 8) - return 1; - - return 0; -} -*/ - -/* PID filter */ - -/* every flexcop has 6 "lower" hw PID filters */ -/* these are enabled by setting bits 0-5 of 0x208 */ -/* for the 32 additional filters we have to select one */ -/* of them through 0x310 and modify through 0x314 */ -/* op: 0=disable, 1=enable */ -static void filter_enable_hw_filter(struct adapter *adapter, int id, u8 op) -{ - dprintk("%s: id=%d op=%d\n", __FUNCTION__, id, op); - if (id <= 5) { - u32 mask = (0x00000001 << id); - write_reg_bitfield(adapter, 0x208, mask, op ? mask : 0); - } else { - /* select */ - write_reg_bitfield(adapter, 0x310, 0x1f, (id - 6) & 0x1f); - /* modify */ - write_reg_bitfield(adapter, 0x314, 0x00006000, op ? 0x00004000 : 0); - } -} - -/* this sets the PID that should pass the specified filter */ -static void pid_set_hw_pid(struct adapter *adapter, int id, u16 pid) -{ - dprintk("%s: id=%d pid=%d\n", __FUNCTION__, id, pid); - if (id <= 5) { - u32 adr = 0x300 + ((id & 6) << 1); - int shift = (id & 1) ? 16 : 0; - dprintk("%s: id=%d addr=%x %c pid=%d\n", __FUNCTION__, id, adr, (id & 1) ? 'h' : 'l', pid); - write_reg_bitfield(adapter, adr, (0x7fff) << shift, (pid & 0x1fff) << shift); - } else { - /* select */ - write_reg_bitfield(adapter, 0x310, 0x1f, (id - 6) & 0x1f); - /* modify */ - write_reg_bitfield(adapter, 0x314, 0x1fff, pid & 0x1fff); - } -} - - -/* -static void filter_enable_null_filter(struct adapter *adapter, u32 op) -{ - dprintk("%s: op=%x\n", __FUNCTION__, op); - - write_reg_bitfield(adapter, 0x208, 0x00000040, op?0x00000040:0); -} -*/ - -static void filter_enable_mask_filter(struct adapter *adapter, u32 op) -{ - dprintk("%s: op=%x\n", __FUNCTION__, op); - - write_reg_bitfield(adapter, 0x208, 0x00000080, op ? 0x00000080 : 0); -} - - -static void ctrl_enable_mac(struct adapter *adapter, u32 op) -{ - write_reg_bitfield(adapter, 0x208, 0x00004000, op ? 0x00004000 : 0); -} - -static int ca_set_mac_dst_addr_filter(struct adapter *adapter, u8 *mac) -{ - u32 tmp1, tmp2; - - tmp1 = (mac[3] << 0x18) | (mac[2] << 0x10) | (mac[1] << 0x08) | mac[0]; - tmp2 = (mac[5] << 0x08) | mac[4]; - - write_reg_dw(adapter, 0x418, tmp1); - write_reg_dw(adapter, 0x41c, tmp2); - - return 0; -} - -/* -static void set_ignore_mac_filter(struct adapter *adapter, u8 op) -{ - if (op != 0) { - write_reg_bitfield(adapter, 0x208, 0x00004000, 0); - adapter->mac_filter = 1; - } else { - if (adapter->mac_filter != 0) { - adapter->mac_filter = 0; - write_reg_bitfield(adapter, 0x208, 0x00004000, 0x00004000); - } - } -} -*/ - -/* -static void check_null_filter_enable(struct adapter *adapter) -{ - filter_enable_null_filter(adapter, 1); - filter_enable_mask_filter(adapter, 1); -} -*/ - -static void pid_set_group_pid(struct adapter *adapter, u16 pid) -{ - u32 value; - - dprintk("%s: pid=%x\n", __FUNCTION__, pid); - value = (pid & 0x3fff) | (read_reg_dw(adapter, 0x30c) & 0xffff0000); - write_reg_dw(adapter, 0x30c, value); -} - -static void pid_set_group_mask(struct adapter *adapter, u16 pid) -{ - u32 value; - - dprintk("%s: pid=%x\n", __FUNCTION__, pid); - value = ((pid & 0x3fff) << 0x10) | (read_reg_dw(adapter, 0x30c) & 0xffff); - write_reg_dw(adapter, 0x30c, value); -} - -/* -static int pid_get_group_pid(struct adapter *adapter) -{ - return read_reg_dw(adapter, 0x30c) & 0x00001fff; -} - -static int pid_get_group_mask(struct adapter *adapter) -{ - return (read_reg_dw(adapter, 0x30c) >> 0x10)& 0x00001fff; -} -*/ - -/* -static void reset_hardware_pid_filter(struct adapter *adapter) -{ - pid_set_stream1_pid(adapter, 0x1fff); - - pid_set_stream2_pid(adapter, 0x1fff); - filter_enable_stream2_filter(adapter, 0); - - pid_set_pcr_pid(adapter, 0x1fff); - filter_enable_pcr_filter(adapter, 0); - - pid_set_pmt_pid(adapter, 0x1fff); - filter_enable_pmt_filter(adapter, 0); - - pid_set_ecm_pid(adapter, 0x1fff); - filter_enable_ecm_filter(adapter, 0); - - pid_set_emm_pid(adapter, 0x1fff); - filter_enable_emm_filter(adapter, 0); -} -*/ - -static void init_pids(struct adapter *adapter) -{ - int i; - - adapter->pid_count = 0; - adapter->whole_bandwidth_count = 0; - for (i = 0; i < adapter->useable_hw_filters; i++) { - dprintk("%s: setting filter %d to 0x1fff\n", __FUNCTION__, i); - adapter->hw_pids[i] = 0x1fff; - pid_set_hw_pid(adapter, i, 0x1fff); -} - - pid_set_group_pid(adapter, 0); - pid_set_group_mask(adapter, 0x1fe0); -} - -static void open_whole_bandwidth(struct adapter *adapter) -{ - dprintk("%s:\n", __FUNCTION__); - pid_set_group_pid(adapter, 0); - pid_set_group_mask(adapter, 0); -/* - filter_enable_mask_filter(adapter, 1); -*/ -} - -static void close_whole_bandwidth(struct adapter *adapter) -{ - dprintk("%s:\n", __FUNCTION__); - pid_set_group_pid(adapter, 0); - pid_set_group_mask(adapter, 0x1fe0); -/* - filter_enable_mask_filter(adapter, 1); -*/ -} - -static void whole_bandwidth_inc(struct adapter *adapter) -{ - if (adapter->whole_bandwidth_count++ == 0) - open_whole_bandwidth(adapter); -} - -static void whole_bandwidth_dec(struct adapter *adapter) -{ - if (--adapter->whole_bandwidth_count <= 0) - close_whole_bandwidth(adapter); -} - -/* The specified PID has to be let through the - hw filters. - We try to allocate an hardware filter and open whole - bandwidth when allocation is impossible. - All pids<=0x1f pass through the group filter. - Returns 1 on success, -1 on error */ -static int add_hw_pid(struct adapter *adapter, u16 pid) -{ - int i; - - dprintk("%s: pid=%d\n", __FUNCTION__, pid); - - if (pid <= 0x1f) - return 1; - - /* we can't use a filter for 0x2000, so no search */ - if (pid != 0x2000) { - /* find an unused hardware filter */ - for (i = 0; i < adapter->useable_hw_filters; i++) { - dprintk("%s: pid=%d searching slot=%d\n", __FUNCTION__, pid, i); - if (adapter->hw_pids[i] == 0x1fff) { - dprintk("%s: pid=%d slot=%d\n", __FUNCTION__, pid, i); - adapter->hw_pids[i] = pid; - pid_set_hw_pid(adapter, i, pid); - filter_enable_hw_filter(adapter, i, 1); - return 1; - } - } - } - /* if we have not used a filter, this pid depends on whole bandwidth */ - dprintk("%s: pid=%d whole_bandwidth\n", __FUNCTION__, pid); - whole_bandwidth_inc(adapter); - return 1; - } - -/* returns -1 if the pid was not present in the filters */ -static int remove_hw_pid(struct adapter *adapter, u16 pid) -{ - int i; - - dprintk("%s: pid=%d\n", __FUNCTION__, pid); - - if (pid <= 0x1f) - return 1; - - /* we can't use a filter for 0x2000, so no search */ - if (pid != 0x2000) { - for (i = 0; i < adapter->useable_hw_filters; i++) { - dprintk("%s: pid=%d searching slot=%d\n", __FUNCTION__, pid, i); - if (adapter->hw_pids[i] == pid) { // find the pid slot - dprintk("%s: pid=%d slot=%d\n", __FUNCTION__, pid, i); - adapter->hw_pids[i] = 0x1fff; - pid_set_hw_pid(adapter, i, 0x1fff); - filter_enable_hw_filter(adapter, i, 0); - return 1; - } - } - } - /* if we have not used a filter, this pid depended on whole bandwith */ - dprintk("%s: pid=%d whole_bandwidth\n", __FUNCTION__, pid); - whole_bandwidth_dec(adapter); - return 1; - } - -/* Adds a PID to the filters. - Adding a pid more than once is possible, we keep reference counts. - Whole stream available through pid==0x2000. - Returns 1 on success, -1 on error */ -static int add_pid(struct adapter *adapter, u16 pid) -{ - int i; - - dprintk("%s: pid=%d\n", __FUNCTION__, pid); - - if (pid > 0x1ffe && pid != 0x2000) - return -1; - - // check if the pid is already present - for (i = 0; i < adapter->pid_count; i++) - if (adapter->pid_list[i] == pid) { - adapter->pid_rc[i]++; // increment ref counter - return 1; - } - - if (adapter->pid_count == N_PID_SLOTS) - return -1; // no more pids can be added - adapter->pid_list[adapter->pid_count] = pid; // register pid - adapter->pid_rc[adapter->pid_count] = 1; - adapter->pid_count++; - // hardware setting - add_hw_pid(adapter, pid); - - return 1; - } - -/* Removes a PID from the filters. */ -static int remove_pid(struct adapter *adapter, u16 pid) -{ - int i; - - dprintk("%s: pid=%d\n", __FUNCTION__, pid); - - if (pid > 0x1ffe && pid != 0x2000) - return -1; - - // check if the pid is present (it must be!) - for (i = 0; i < adapter->pid_count; i++) { - if (adapter->pid_list[i] == pid) { - adapter->pid_rc[i]--; - if (adapter->pid_rc[i] <= 0) { - // remove from the list - adapter->pid_count--; - adapter->pid_list[i]=adapter->pid_list[adapter->pid_count]; - adapter->pid_rc[i] = adapter->pid_rc[adapter->pid_count]; - // hardware setting - remove_hw_pid(adapter, pid); - } - return 1; - } - } - - return -1; -} - - -/* dma & irq */ -static void ctrl_enable_smc(struct adapter *adapter, u32 op) -{ - write_reg_bitfield(adapter, 0x208, 0x00000800, op ? 0x00000800 : 0); -} - -static void dma_enable_disable_irq(struct adapter *adapter, u32 flag1, u32 flag2, u32 flag3) -{ - adapter->dma_ctrl = adapter->dma_ctrl & 0x000f0000; - - if (flag1 == 0) { - if (flag2 == 0) - adapter->dma_ctrl = adapter->dma_ctrl & ~0x00010000; - else - adapter->dma_ctrl = adapter->dma_ctrl | 0x00010000; - - if (flag3 == 0) - adapter->dma_ctrl = adapter->dma_ctrl & ~0x00020000; - else - adapter->dma_ctrl = adapter->dma_ctrl | 0x00020000; - - } else { - - if (flag2 == 0) - adapter->dma_ctrl = adapter->dma_ctrl & ~0x00040000; - else - adapter->dma_ctrl = adapter->dma_ctrl | 0x00040000; - - if (flag3 == 0) - adapter->dma_ctrl = adapter->dma_ctrl & ~0x00080000; - else - adapter->dma_ctrl = adapter->dma_ctrl | 0x00080000; - } -} - -static void irq_dma_enable_disable_irq(struct adapter *adapter, u32 op) -{ - u32 value; - - value = read_reg_dw(adapter, 0x208) & 0xfff0ffff; - - if (op != 0) - value = value | (adapter->dma_ctrl & 0x000f0000); - - write_reg_dw(adapter, 0x208, value); -} - -/* FlexCopII has 2 dma channels. DMA1 is used to transfer TS data to - system memory. - - The DMA1 buffer is divided in 2 subbuffers of equal size. - FlexCopII will transfer TS data to one subbuffer, signal an interrupt - when the subbuffer is full and continue fillig the second subbuffer. - - For DMA1: - subbuffer size in 32-bit words is stored in the first 24 bits of - register 0x004. The last 8 bits of register 0x004 contain the number - of subbuffers. - - the first 30 bits of register 0x000 contain the address of the first - subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1, - when dma1 is enabled. - - the first 30 bits of register 0x00c contain the address of the second - subbuffer. the last 2 bits contain 1. - - register 0x008 will contain the address of the subbuffer that was filled - with TS data, when FlexCopII will generate an interrupt. - - For DMA2: - subbuffer size in 32-bit words is stored in the first 24 bits of - register 0x014. The last 8 bits of register 0x014 contain the number - of subbuffers. - - the first 30 bits of register 0x010 contain the address of the first - subbuffer. The last 2 bits contain 0, when dma1 is disabled and 1, - when dma1 is enabled. - - the first 30 bits of register 0x01c contain the address of the second - subbuffer. the last 2 bits contain 1. - - register 0x018 contains the address of the subbuffer that was filled - with TS data, when FlexCopII generates an interrupt. -*/ -static int dma_init_dma(struct adapter *adapter, u32 dma_channel) -{ - u32 subbuffers, subbufsize, subbuf0, subbuf1; - - if (dma_channel == 0) { - dprintk("%s: Initializing DMA1 channel\n", __FUNCTION__); - - subbuffers = 2; - - subbufsize = (((adapter->dmaq1.buffer_size / 2) / 4) << 8) | subbuffers; - - subbuf0 = adapter->dmaq1.bus_addr & 0xfffffffc; - - subbuf1 = ((adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) & 0xfffffffc) | 1; - - dprintk("%s: first subbuffer address = 0x%x\n", __FUNCTION__, subbuf0); - udelay(1000); - write_reg_dw(adapter, 0x000, subbuf0); - - dprintk("%s: subbuffer size = 0x%x\n", __FUNCTION__, (subbufsize >> 8) * 4); - udelay(1000); - write_reg_dw(adapter, 0x004, subbufsize); - - dprintk("%s: second subbuffer address = 0x%x\n", __FUNCTION__, subbuf1); - udelay(1000); - write_reg_dw(adapter, 0x00c, subbuf1); - - dprintk("%s: counter = 0x%x\n", __FUNCTION__, adapter->dmaq1.bus_addr & 0xfffffffc); - write_reg_dw(adapter, 0x008, adapter->dmaq1.bus_addr & 0xfffffffc); - udelay(1000); - - dma_enable_disable_irq(adapter, 0, 1, subbuffers ? 1 : 0); - - irq_dma_enable_disable_irq(adapter, 1); - - sram_set_media_dest(adapter, 1); - sram_set_net_dest(adapter, 1); - sram_set_cai_dest(adapter, 2); - sram_set_cao_dest(adapter, 2); - } - - if (dma_channel == 1) { - dprintk("%s: Initializing DMA2 channel\n", __FUNCTION__); - - subbuffers = 2; - - subbufsize = (((adapter->dmaq2.buffer_size / 2) / 4) << 8) | subbuffers; - - subbuf0 = adapter->dmaq2.bus_addr & 0xfffffffc; - - subbuf1 = ((adapter->dmaq2.bus_addr + adapter->dmaq2.buffer_size / 2) & 0xfffffffc) | 1; - - dprintk("%s: first subbuffer address = 0x%x\n", __FUNCTION__, subbuf0); - udelay(1000); - write_reg_dw(adapter, 0x010, subbuf0); - - dprintk("%s: subbuffer size = 0x%x\n", __FUNCTION__, (subbufsize >> 8) * 4); - udelay(1000); - write_reg_dw(adapter, 0x014, subbufsize); - - dprintk("%s: second buffer address = 0x%x\n", __FUNCTION__, subbuf1); - udelay(1000); - write_reg_dw(adapter, 0x01c, subbuf1); - - sram_set_cai_dest(adapter, 2); - } - - return 0; -} - -static void ctrl_enable_receive_data(struct adapter *adapter, u32 op) -{ - if (op == 0) { - write_reg_bitfield(adapter, 0x208, 0x00008000, 0); - adapter->dma_status = adapter->dma_status & ~0x00000004; - } else { - write_reg_bitfield(adapter, 0x208, 0x00008000, 0x00008000); - adapter->dma_status = adapter->dma_status | 0x00000004; - } -} - -/* bit 0 of dma_mask is set to 1 if dma1 channel has to be enabled/disabled - bit 1 of dma_mask is set to 1 if dma2 channel has to be enabled/disabled -*/ -static void dma_start_stop(struct adapter *adapter, u32 dma_mask, int start_stop) -{ - u32 dma_enable, dma1_enable, dma2_enable; - - dprintk("%s: dma_mask=%x\n", __FUNCTION__, dma_mask); - - if (start_stop == 1) { - dprintk("%s: starting dma\n", __FUNCTION__); - - dma1_enable = 0; - dma2_enable = 0; - - if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) == 0) && (adapter->dmaq1.bus_addr != 0)) { - adapter->dma_status = adapter->dma_status | 1; - dma1_enable = 1; - } - - if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) == 0) && (adapter->dmaq2.bus_addr != 0)) { - adapter->dma_status = adapter->dma_status | 2; - dma2_enable = 1; - } - // enable dma1 and dma2 - if ((dma1_enable == 1) && (dma2_enable == 1)) { - write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr | 1); - write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1); - write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr | 1); - - ctrl_enable_receive_data(adapter, 1); - - return; - } - // enable dma1 - if ((dma1_enable == 1) && (dma2_enable == 0)) { - write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr | 1); - write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1); - - ctrl_enable_receive_data(adapter, 1); - - return; - } - // enable dma2 - if ((dma1_enable == 0) && (dma2_enable == 1)) { - write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr | 1); - - ctrl_enable_receive_data(adapter, 1); - - return; - } - // start dma - if ((dma1_enable == 0) && (dma2_enable == 0)) { - ctrl_enable_receive_data(adapter, 1); - - return; - } - - } else { - - dprintk("%s: stopping dma\n", __FUNCTION__); - - dma_enable = adapter->dma_status & 0x00000003; - - if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) != 0)) { - dma_enable = dma_enable & 0xfffffffe; - } - - if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) != 0)) { - dma_enable = dma_enable & 0xfffffffd; - } - //stop dma - if ((dma_enable == 0) && ((adapter->dma_status & 4) != 0)) { - ctrl_enable_receive_data(adapter, 0); - - udelay(3000); - } - //disable dma1 - if (((dma_mask & 1) != 0) && ((adapter->dma_status & 1) != 0) && (adapter->dmaq1.bus_addr != 0)) { - write_reg_dw(adapter, 0x000, adapter->dmaq1.bus_addr); - write_reg_dw(adapter, 0x00c, (adapter->dmaq1.bus_addr + adapter->dmaq1.buffer_size / 2) | 1); - - adapter->dma_status = adapter->dma_status & ~0x00000001; - } - //disable dma2 - if (((dma_mask & 2) != 0) && ((adapter->dma_status & 2) != 0) && (adapter->dmaq2.bus_addr != 0)) { - write_reg_dw(adapter, 0x010, adapter->dmaq2.bus_addr); - - adapter->dma_status = adapter->dma_status & ~0x00000002; - } - } -} - -static void open_stream(struct adapter *adapter, u16 pid) -{ - u32 dma_mask; - - ++adapter->capturing; - - filter_enable_mask_filter(adapter, 1); - - add_pid(adapter, pid); - - dprintk("%s: adapter->dma_status=%x\n", __FUNCTION__, adapter->dma_status); - - if ((adapter->dma_status & 7) != 7) { - dma_mask = 0; - - if (((adapter->dma_status & 0x10000000) != 0) && ((adapter->dma_status & 1) == 0)) { - dma_mask = dma_mask | 1; - - adapter->dmaq1.head = 0; - adapter->dmaq1.tail = 0; - - memset(adapter->dmaq1.buffer, 0, adapter->dmaq1.buffer_size); - } - - if (((adapter->dma_status & 0x20000000) != 0) && ((adapter->dma_status & 2) == 0)) { - dma_mask = dma_mask | 2; - - adapter->dmaq2.head = 0; - adapter->dmaq2.tail = 0; - } - - if (dma_mask != 0) { - irq_dma_enable_disable_irq(adapter, 1); - - dma_start_stop(adapter, dma_mask, 1); - } - } -} - -static void close_stream(struct adapter *adapter, u16 pid) -{ - if (adapter->capturing > 0) - --adapter->capturing; - - dprintk("%s: dma_status=%x\n", __FUNCTION__, adapter->dma_status); - - if (adapter->capturing == 0) { - u32 dma_mask = 0; - - if ((adapter->dma_status & 1) != 0) - dma_mask = dma_mask | 0x00000001; - if ((adapter->dma_status & 2) != 0) - dma_mask = dma_mask | 0x00000002; - - if (dma_mask != 0) { - dma_start_stop(adapter, dma_mask, 0); - } - } - remove_pid(adapter, pid); -} - -static void interrupt_service_dma1(struct adapter *adapter) -{ - struct dvb_demux *dvbdmx = &adapter->demux; - - int n_cur_dma_counter; - u32 n_num_bytes_parsed; - u32 n_num_new_bytes_transferred; - u32 dw_default_packet_size = 188; - u8 gb_tmp_buffer[188]; - u8 *pb_dma_buf_cur_pos; - - n_cur_dma_counter = readl(adapter->io_mem + 0x008) - adapter->dmaq1.bus_addr; - n_cur_dma_counter = (n_cur_dma_counter / dw_default_packet_size) * dw_default_packet_size; - - if ((n_cur_dma_counter < 0) || (n_cur_dma_counter > adapter->dmaq1.buffer_size)) { - dprintk("%s: dma counter outside dma buffer\n", __FUNCTION__); - return; - } - - adapter->dmaq1.head = n_cur_dma_counter; - - if (adapter->dmaq1.tail <= n_cur_dma_counter) { - n_num_new_bytes_transferred = n_cur_dma_counter - adapter->dmaq1.tail; - - } else { - - n_num_new_bytes_transferred = (adapter->dmaq1.buffer_size - adapter->dmaq1.tail) + n_cur_dma_counter; - } - - ddprintk("%s: n_cur_dma_counter = %d\n", __FUNCTION__, n_cur_dma_counter); - ddprintk("%s: dmaq1.tail = %d\n", __FUNCTION__, adapter->dmaq1.tail); - ddprintk("%s: bytes_transferred = %d\n", __FUNCTION__, n_num_new_bytes_transferred); - - if (n_num_new_bytes_transferred < dw_default_packet_size) - return; - - n_num_bytes_parsed = 0; - - while (n_num_bytes_parsed < n_num_new_bytes_transferred) { - pb_dma_buf_cur_pos = adapter->dmaq1.buffer + adapter->dmaq1.tail; - - if (adapter->dmaq1.buffer + adapter->dmaq1.buffer_size < adapter->dmaq1.buffer + adapter->dmaq1.tail + 188) { - memcpy(gb_tmp_buffer, adapter->dmaq1.buffer + adapter->dmaq1.tail, - adapter->dmaq1.buffer_size - adapter->dmaq1.tail); - memcpy(gb_tmp_buffer + (adapter->dmaq1.buffer_size - adapter->dmaq1.tail), adapter->dmaq1.buffer, - (188 - (adapter->dmaq1.buffer_size - adapter->dmaq1.tail))); - - pb_dma_buf_cur_pos = gb_tmp_buffer; - } - - if (adapter->capturing != 0) { - dvb_dmx_swfilter_packets(dvbdmx, pb_dma_buf_cur_pos, dw_default_packet_size / 188); - } - - n_num_bytes_parsed = n_num_bytes_parsed + dw_default_packet_size; - - adapter->dmaq1.tail = adapter->dmaq1.tail + dw_default_packet_size; - - if (adapter->dmaq1.tail >= adapter->dmaq1.buffer_size) - adapter->dmaq1.tail = adapter->dmaq1.tail - adapter->dmaq1.buffer_size; - }; -} - -static void interrupt_service_dma2(struct adapter *adapter) -{ - printk("%s:\n", __FUNCTION__); -} - -static irqreturn_t isr(int irq, void *dev_id, struct pt_regs *regs) -{ - struct adapter *tmp = dev_id; - - u32 value; - - ddprintk("%s:\n", __FUNCTION__); - - spin_lock_irq(&tmp->lock); - - if (0 == ((value = read_reg_dw(tmp, 0x20c)) & 0x0f)) { - spin_unlock_irq(&tmp->lock); - return IRQ_NONE; - } - - while (value != 0) { - if ((value & 0x03) != 0) - interrupt_service_dma1(tmp); - if ((value & 0x0c) != 0) - interrupt_service_dma2(tmp); - value = read_reg_dw(tmp, 0x20c) & 0x0f; - } - - spin_unlock_irq(&tmp->lock); - return IRQ_HANDLED; -} - -static int init_dma_queue_one(struct adapter *adapter, struct dmaq *dmaq, - int size, int dmaq_offset) -{ - struct pci_dev *pdev = adapter->pdev; - dma_addr_t dma_addr; - - dmaq->head = 0; - dmaq->tail = 0; - - dmaq->buffer = pci_alloc_consistent(pdev, size + 0x80, &dma_addr); - if (!dmaq->buffer) - return -ENOMEM; - - dmaq->bus_addr = dma_addr; - dmaq->buffer_size = size; - - dma_init_dma(adapter, dmaq_offset); - - ddprintk("%s: allocated dma buffer at 0x%p, length=%d\n", - __FUNCTION__, dmaq->buffer, size); - - return 0; - } - -static int init_dma_queue(struct adapter *adapter) -{ - struct { - struct dmaq *dmaq; - u32 dma_status; - int size; - } dmaq_desc[] = { - { &adapter->dmaq1, 0x10000000, SIZE_OF_BUF_DMA1 }, - { &adapter->dmaq2, 0x20000000, SIZE_OF_BUF_DMA2 } - }, *p = dmaq_desc; - int i; - - for (i = 0; i < 2; i++, p++) { - if (init_dma_queue_one(adapter, p->dmaq, p->size, i) < 0) - adapter->dma_status &= ~p->dma_status; - else - adapter->dma_status |= p->dma_status; - } - return (adapter->dma_status & 0x30000000) ? 0 : -ENOMEM; -} - -static void free_dma_queue_one(struct adapter *adapter, struct dmaq *dmaq) -{ - if (dmaq->buffer) { - pci_free_consistent(adapter->pdev, dmaq->buffer_size + 0x80, - dmaq->buffer, dmaq->bus_addr); - memset(dmaq, 0, sizeof(*dmaq)); - } -} - -static void free_dma_queue(struct adapter *adapter) -{ - struct dmaq *dmaq[] = { - &adapter->dmaq1, - &adapter->dmaq2, - NULL - }, **p; - - for (p = dmaq; *p; p++) - free_dma_queue_one(adapter, *p); - } - -static void release_adapter(struct adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - - iounmap(adapter->io_mem); - pci_disable_device(pdev); - pci_release_region(pdev, 0); - pci_release_region(pdev, 1); -} - -static void free_adapter_object(struct adapter *adapter) -{ - dprintk("%s:\n", __FUNCTION__); - - close_stream(adapter, 0); - free_irq(adapter->irq, adapter); - free_dma_queue(adapter); - release_adapter(adapter); - kfree(adapter); -} - -static struct pci_driver skystar2_pci_driver; - -static int claim_adapter(struct adapter *adapter) -{ - struct pci_dev *pdev = adapter->pdev; - u16 var; - int ret; - - ret = pci_request_region(pdev, 1, skystar2_pci_driver.name); - if (ret < 0) - goto out; - - ret = pci_request_region(pdev, 0, skystar2_pci_driver.name); - if (ret < 0) - goto err_pci_release_1; - - pci_read_config_byte(pdev, PCI_CLASS_REVISION, &adapter->card_revision); - - dprintk("%s: card revision %x \n", __FUNCTION__, adapter->card_revision); - - ret = pci_enable_device(pdev); - if (ret < 0) - goto err_pci_release_0; - - pci_read_config_word(pdev, 4, &var); - - if ((var & 4) == 0) - pci_set_master(pdev); - - adapter->io_port = pdev->resource[1].start; - - adapter->io_mem = ioremap(pdev->resource[0].start, 0x800); - - if (!adapter->io_mem) { - dprintk("%s: can not map io memory\n", __FUNCTION__); - ret = -EIO; - goto err_pci_disable; - } - - dprintk("%s: io memory maped at %p\n", __FUNCTION__, adapter->io_mem); - - ret = 1; -out: - return ret; - -err_pci_disable: - pci_disable_device(pdev); -err_pci_release_0: - pci_release_region(pdev, 0); -err_pci_release_1: - pci_release_region(pdev, 1); - goto out; -} - -/* -static int sll_reset_flexcop(struct adapter *adapter) -{ - write_reg_dw(adapter, 0x208, 0); - write_reg_dw(adapter, 0x210, 0xb2ff); - - return 0; -} -*/ - -static void decide_how_many_hw_filters(struct adapter *adapter) -{ - int hw_filters; - int mod_option_hw_filters; - - // FlexCop IIb & III have 6+32 hw filters - // FlexCop II has 6 hw filters, every other should have at least 6 - switch (adapter->b2c2_revision) { - case 0x82: /* II */ - hw_filters = 6; - break; - case 0xc3: /* IIB */ - hw_filters = 6 + 32; - break; - case 0xc0: /* III */ - hw_filters = 6 + 32; - break; - default: - hw_filters = 6; - break; - } - printk("%s: the chip has %i hardware filters", __FILE__, hw_filters); - - mod_option_hw_filters = 0; - if (enable_hw_filters >= 1) - mod_option_hw_filters += 6; - if (enable_hw_filters >= 2) - mod_option_hw_filters += 32; - - if (mod_option_hw_filters >= hw_filters) { - adapter->useable_hw_filters = hw_filters; - } else { - adapter->useable_hw_filters = mod_option_hw_filters; - printk(", but only %d will be used because of module option", mod_option_hw_filters); - } - printk("\n"); - dprintk("%s: useable_hardware_filters set to %i\n", __FILE__, adapter->useable_hw_filters); -} - -static int driver_initialize(struct pci_dev *pdev) -{ - struct adapter *adapter; - u32 tmp; - int ret = -ENOMEM; - - adapter = kmalloc(sizeof(struct adapter), GFP_KERNEL); - if (!adapter) { - dprintk("%s: out of memory!\n", __FUNCTION__); - goto out; - } - - memset(adapter, 0, sizeof(struct adapter)); - - pci_set_drvdata(pdev,adapter); - - adapter->pdev = pdev; - adapter->irq = pdev->irq; - - ret = claim_adapter(adapter); - if (ret < 0) - goto err_kfree; - - irq_dma_enable_disable_irq(adapter, 0); - - ret = request_irq(pdev->irq, isr, 0x4000000, "Skystar2", adapter); - if (ret < 0) { - dprintk("%s: unable to allocate irq=%d !\n", __FUNCTION__, pdev->irq); - goto err_release_adapter; - } - - read_reg_dw(adapter, 0x208); - write_reg_dw(adapter, 0x208, 0); - write_reg_dw(adapter, 0x210, 0xb2ff); - write_reg_dw(adapter, 0x208, 0x40); - - ret = init_dma_queue(adapter); - if (ret < 0) - goto err_free_irq; - - adapter->b2c2_revision = (read_reg_dw(adapter, 0x204) >> 0x18); - - switch (adapter->b2c2_revision) { - case 0x82: - printk("%s: FlexCopII(rev.130) chip found\n", __FILE__); - break; - case 0xc3: - printk("%s: FlexCopIIB(rev.195) chip found\n", __FILE__); - break; - case 0xc0: - printk("%s: FlexCopIII(rev.192) chip found\n", __FILE__); - break; - default: - printk("%s: The revision of the FlexCop chip on your card is %d\n", __FILE__, adapter->b2c2_revision); - printk("%s: This driver works only with FlexCopII(rev.130), FlexCopIIB(rev.195) and FlexCopIII(rev.192).\n", __FILE__); - ret = -ENODEV; - goto err_free_dma_queue; - } - - decide_how_many_hw_filters(adapter); - - init_pids(adapter); - - tmp = read_reg_dw(adapter, 0x204); - - write_reg_dw(adapter, 0x204, 0); - mdelay(20); - - write_reg_dw(adapter, 0x204, tmp); - mdelay(10); - - tmp = read_reg_dw(adapter, 0x308); - write_reg_dw(adapter, 0x308, 0x4000 | tmp); - - adapter->dw_sram_type = 0x10000; - - sll_detect_sram_size(adapter); - - dprintk("%s sram length = %d, sram type= %x\n", __FUNCTION__, sram_length(adapter), adapter->dw_sram_type); - - sram_set_media_dest(adapter, 1); - sram_set_net_dest(adapter, 1); - - ctrl_enable_smc(adapter, 0); - - sram_set_cai_dest(adapter, 2); - sram_set_cao_dest(adapter, 2); - - dma_enable_disable_irq(adapter, 1, 0, 0); - - if (eeprom_get_mac_addr(adapter, 0, adapter->mac_addr) != 0) { - printk("%s MAC address = %02x:%02x:%02x:%02x:%02x:%02x:%02x:%02x \n", __FUNCTION__, adapter->mac_addr[0], - adapter->mac_addr[1], adapter->mac_addr[2], adapter->mac_addr[3], adapter->mac_addr[4], adapter->mac_addr[5], - adapter->mac_addr[6], adapter->mac_addr[7] - ); - - ca_set_mac_dst_addr_filter(adapter, adapter->mac_addr); - ctrl_enable_mac(adapter, 1); - } - - spin_lock_init(&adapter->lock); - -out: - return ret; - -err_free_dma_queue: - free_dma_queue(adapter); -err_free_irq: - free_irq(pdev->irq, adapter); -err_release_adapter: - release_adapter(adapter); -err_kfree: - pci_set_drvdata(pdev, NULL); - kfree(adapter); - goto out; -} - -static void driver_halt(struct pci_dev *pdev) -{ - struct adapter *adapter = pci_get_drvdata(pdev); - - irq_dma_enable_disable_irq(adapter, 0); - - ctrl_enable_receive_data(adapter, 0); - - free_adapter_object(adapter); - - pci_set_drvdata(pdev, NULL); -} - -static int dvb_start_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *dvbdmx = dvbdmxfeed->demux; - struct adapter *adapter = (struct adapter *) dvbdmx->priv; - - dprintk("%s: PID=%d, type=%d\n", __FUNCTION__, dvbdmxfeed->pid, dvbdmxfeed->type); - - open_stream(adapter, dvbdmxfeed->pid); - - return 0; -} - -static int dvb_stop_feed(struct dvb_demux_feed *dvbdmxfeed) -{ - struct dvb_demux *dvbdmx = dvbdmxfeed->demux; - struct adapter *adapter = (struct adapter *) dvbdmx->priv; - - dprintk("%s: PID=%d, type=%d\n", __FUNCTION__, dvbdmxfeed->pid, dvbdmxfeed->type); - - close_stream(adapter, dvbdmxfeed->pid); - - return 0; -} - -/* lnb control */ -static void set_tuner_tone(struct adapter *adapter, u8 tone) -{ - u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; - u16 ax; - - dprintk("%s: %u\n", __FUNCTION__, tone); - - switch (tone) { - case 1: - ax = wz_half_period_for_45_mhz[0]; - break; - case 2: - ax = wz_half_period_for_45_mhz[1]; - break; - case 3: - ax = wz_half_period_for_45_mhz[2]; - break; - case 4: - ax = wz_half_period_for_45_mhz[3]; - break; - - default: - ax = 0; - } - - if (ax != 0) { - write_reg_dw(adapter, 0x200, ((ax << 0x0f) + (ax & 0x7fff)) | 0x40000000); - - } else { - - write_reg_dw(adapter, 0x200, 0x40ff8000); - } -} - -static void set_tuner_polarity(struct adapter *adapter, u8 polarity) -{ - u32 var; - - dprintk("%s : polarity = %u \n", __FUNCTION__, polarity); - - var = read_reg_dw(adapter, 0x204); - - if (polarity == 0) { - dprintk("%s: LNB power off\n", __FUNCTION__); - var = var | 1; - }; - - if (polarity == 1) { - var = var & ~1; - var = var & ~4; - }; - - if (polarity == 2) { - var = var & ~1; - var = var | 4; - } - - write_reg_dw(adapter, 0x204, var); -} - -static void diseqc_send_bit(struct adapter *adapter, int data) -{ - set_tuner_tone(adapter, 1); - udelay(data ? 500 : 1000); - set_tuner_tone(adapter, 0); - udelay(data ? 1000 : 500); -} - - -static void diseqc_send_byte(struct adapter *adapter, int data) - { - int i, par = 1, d; - - for (i = 7; i >= 0; i--) { - d = (data >> i) & 1; - par ^= d; - diseqc_send_bit(adapter, d); - } - - diseqc_send_bit(adapter, par); - } - - -static int send_diseqc_msg(struct adapter *adapter, int len, u8 *msg, unsigned long burst) -{ - int i; - - set_tuner_tone(adapter, 0); - mdelay(16); - - for (i = 0; i < len; i++) - diseqc_send_byte(adapter, msg[i]); - - mdelay(16); - - if (burst != -1) { - if (burst) - diseqc_send_byte(adapter, 0xff); - else { - set_tuner_tone(adapter, 1); - udelay(12500); - set_tuner_tone(adapter, 0); - } - msleep(20); - } - - return 0; -} - -static int flexcop_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) -{ - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - switch(tone) { - case SEC_TONE_ON: - set_tuner_tone(adapter, 1); - break; - case SEC_TONE_OFF: - set_tuner_tone(adapter, 0); - break; - default: - return -EINVAL; - }; - - return 0; -} - -static int flexcop_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) - { - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - send_diseqc_msg(adapter, cmd->msg_len, cmd->msg, 0); - - return 0; - } - -static int flexcop_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) -{ - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - send_diseqc_msg(adapter, 0, NULL, minicmd); - - return 0; -} - -static int flexcop_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) - { - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - dprintk("%s: FE_SET_VOLTAGE\n", __FUNCTION__); - - switch (voltage) { - case SEC_VOLTAGE_13: - dprintk("%s: SEC_VOLTAGE_13, %x\n", __FUNCTION__, SEC_VOLTAGE_13); - set_tuner_polarity(adapter, 1); - return 0; - - case SEC_VOLTAGE_18: - dprintk("%s: SEC_VOLTAGE_18, %x\n", __FUNCTION__, SEC_VOLTAGE_18); - set_tuner_polarity(adapter, 2); - return 0; - - default: - return -EINVAL; - } - } - -static int flexcop_sleep(struct dvb_frontend* fe) - { - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - dprintk("%s: FE_SLEEP\n", __FUNCTION__); - set_tuner_polarity(adapter, 0); - - if (adapter->fe_sleep) return adapter->fe_sleep(fe); - return 0; - } - -static u32 flexcop_i2c_func(struct i2c_adapter *adapter) - { - printk("flexcop_i2c_func\n"); - - return I2C_FUNC_I2C; -} - -static struct i2c_algorithm flexcop_algo = { - .name = "flexcop i2c algorithm", - .id = I2C_ALGO_BIT, - .master_xfer = master_xfer, - .functionality = flexcop_i2c_func, -}; - - - - -static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend* fe, u32 srate, u32 ratio) -{ - u8 aclk = 0; - u8 bclk = 0; - - if (srate < 1500000) { aclk = 0xb7; bclk = 0x47; } - else if (srate < 3000000) { aclk = 0xb7; bclk = 0x4b; } - else if (srate < 7000000) { aclk = 0xb7; bclk = 0x4f; } - else if (srate < 14000000) { aclk = 0xb7; bclk = 0x53; } - else if (srate < 30000000) { aclk = 0xb6; bclk = 0x53; } - else if (srate < 45000000) { aclk = 0xb4; bclk = 0x51; } - - stv0299_writereg (fe, 0x13, aclk); - stv0299_writereg (fe, 0x14, bclk); - stv0299_writereg (fe, 0x1f, (ratio >> 16) & 0xff); - stv0299_writereg (fe, 0x20, (ratio >> 8) & 0xff); - stv0299_writereg (fe, 0x21, (ratio ) & 0xf0); - - return 0; -} - -static int samsung_tbmu24112_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - div = params->frequency / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = div & 0xff; - buf[2] = 0x84; // 0xC4 - buf[3] = 0x08; - - if (params->frequency < 1500000) buf[3] |= 0x10; - - if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static u8 samsung_tbmu24112_inittab[] = { - 0x01, 0x15, - 0x02, 0x30, - 0x03, 0x00, - 0x04, 0x7D, - 0x05, 0x35, - 0x06, 0x02, - 0x07, 0x00, - 0x08, 0xC3, - 0x0C, 0x00, - 0x0D, 0x81, - 0x0E, 0x23, - 0x0F, 0x12, - 0x10, 0x7E, - 0x11, 0x84, - 0x12, 0xB9, - 0x13, 0x88, - 0x14, 0x89, - 0x15, 0xC9, - 0x16, 0x00, - 0x17, 0x5C, - 0x18, 0x00, - 0x19, 0x00, - 0x1A, 0x00, - 0x1C, 0x00, - 0x1D, 0x00, - 0x1E, 0x00, - 0x1F, 0x3A, - 0x20, 0x2E, - 0x21, 0x80, - 0x22, 0xFF, - 0x23, 0xC1, - 0x28, 0x00, - 0x29, 0x1E, - 0x2A, 0x14, - 0x2B, 0x0F, - 0x2C, 0x09, - 0x2D, 0x05, - 0x31, 0x1F, - 0x32, 0x19, - 0x33, 0xFE, - 0x34, 0x93, - 0xff, 0xff, - }; - -static struct stv0299_config samsung_tbmu24112_config = { - .demod_address = 0x68, - .inittab = samsung_tbmu24112_inittab, - .mclk = 88000000UL, - .invert = 0, - .enhanced_tuning = 0, - .skip_reinit = 0, - .lock_output = STV0229_LOCKOUTPUT_LK, - .volt13_op0_op1 = STV0299_VOLT13_OP1, - .min_delay_ms = 100, - .set_symbol_rate = samsung_tbmu24112_set_symbol_rate, - .pll_set = samsung_tbmu24112_pll_set, -}; - - - -static int nxt2002_request_firmware(struct dvb_frontend* fe, const struct firmware **fw, char* name) -{ - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - return request_firmware(fw, name, &adapter->pdev->dev); -} - - -static struct nxt2002_config samsung_tbmv_config = { - .demod_address = 0x0A, - .request_firmware = nxt2002_request_firmware, -}; - -static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend* fe) -{ - static u8 mt352_clock_config [] = { 0x89, 0x18, 0x2d }; - static u8 mt352_reset [] = { 0x50, 0x80 }; - static u8 mt352_adc_ctl_1_cfg [] = { 0x8E, 0x40 }; - static u8 mt352_agc_cfg [] = { 0x67, 0x28, 0xa1 }; - static u8 mt352_capt_range_cfg[] = { 0x75, 0x32 }; - - mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); - udelay(2000); - mt352_write(fe, mt352_reset, sizeof(mt352_reset)); - mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - mt352_write(fe, mt352_capt_range_cfg, sizeof(mt352_capt_range_cfg)); - - return 0; -} - -static int samsung_tdtc9251dh0_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u8* pllbuf) -{ - u32 div; - unsigned char bs = 0; - - #define IF_FREQUENCYx6 217 /* 6 * 36.16666666667MHz */ - div = (((params->frequency + 83333) * 3) / 500000) + IF_FREQUENCYx6; - - if (params->frequency >= 48000000 && params->frequency <= 154000000) bs = 0x09; - if (params->frequency >= 161000000 && params->frequency <= 439000000) bs = 0x0a; - if (params->frequency >= 447000000 && params->frequency <= 863000000) bs = 0x08; - - pllbuf[0] = 0xc2; // Note: non-linux standard PLL i2c address - pllbuf[1] = div >> 8; - pllbuf[2] = div & 0xff; - pllbuf[3] = 0xcc; - pllbuf[4] = bs; - - return 0; -} - -static struct mt352_config samsung_tdtc9251dh0_config = { - - .demod_address = 0x0f, - .demod_init = samsung_tdtc9251dh0_demod_init, - .pll_set = samsung_tdtc9251dh0_pll_set, -}; - -static int skystar23_samsung_tbdu18132_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) -{ - u8 buf[4]; - u32 div; - struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; - struct adapter* adapter = (struct adapter*) fe->dvb->priv; - - div = (params->frequency + (125/2)) / 125; - - buf[0] = (div >> 8) & 0x7f; - buf[1] = (div >> 0) & 0xff; - buf[2] = 0x84 | ((div >> 10) & 0x60); - buf[3] = 0x80; - - if (params->frequency < 1550000) - buf[3] |= 0x02; - - if (i2c_transfer (&adapter->i2c_adap, &msg, 1) != 1) return -EIO; - return 0; -} - -static struct mt312_config skystar23_samsung_tbdu18132_config = { - - .demod_address = 0x0e, - .pll_set = skystar23_samsung_tbdu18132_pll_set, -}; - - - - -static void frontend_init(struct adapter *skystar2) -{ - switch(skystar2->pdev->device) { - case 0x2103: // Technisat Skystar2 OR Technisat Airstar2 (DVB-T or ATSC) - - // Attempt to load the Nextwave nxt2002 for ATSC support - skystar2->fe = nxt2002_attach(&samsung_tbmv_config, &skystar2->i2c_adap); - if (skystar2->fe != NULL) { - skystar2->fe_sleep = skystar2->fe->ops->sleep; - skystar2->fe->ops->sleep = flexcop_sleep; - break; - } - - // try the skystar2 v2.6 first (stv0299/Samsung tbmu24112(sl1935)) - skystar2->fe = stv0299_attach(&samsung_tbmu24112_config, &skystar2->i2c_adap); - if (skystar2->fe != NULL) { - skystar2->fe->ops->set_voltage = flexcop_set_voltage; - skystar2->fe_sleep = skystar2->fe->ops->sleep; - skystar2->fe->ops->sleep = flexcop_sleep; - break; -} - - // try the airstar2 (mt352/Samsung tdtc9251dh0(??)) - skystar2->fe = mt352_attach(&samsung_tdtc9251dh0_config, &skystar2->i2c_adap); - if (skystar2->fe != NULL) { - skystar2->fe->ops->info.frequency_min = 474000000; - skystar2->fe->ops->info.frequency_max = 858000000; - break; - } - - // try the skystar2 v2.3 (vp310/Samsung tbdu18132(tsa5059)) - skystar2->fe = vp310_attach(&skystar23_samsung_tbdu18132_config, &skystar2->i2c_adap); - if (skystar2->fe != NULL) { - skystar2->fe->ops->diseqc_send_master_cmd = flexcop_diseqc_send_master_cmd; - skystar2->fe->ops->diseqc_send_burst = flexcop_diseqc_send_burst; - skystar2->fe->ops->set_tone = flexcop_set_tone; - skystar2->fe->ops->set_voltage = flexcop_set_voltage; - skystar2->fe_sleep = skystar2->fe->ops->sleep; - skystar2->fe->ops->sleep = flexcop_sleep; - break; - } - break; - } - - if (skystar2->fe == NULL) { - printk("skystar2: A frontend driver was not found for device %04x/%04x subsystem %04x/%04x\n", - skystar2->pdev->vendor, - skystar2->pdev->device, - skystar2->pdev->subsystem_vendor, - skystar2->pdev->subsystem_device); - } else { - if (dvb_register_frontend(&skystar2->dvb_adapter, skystar2->fe)) { - printk("skystar2: Frontend registration failed!\n"); - if (skystar2->fe->ops->release) - skystar2->fe->ops->release(skystar2->fe); - skystar2->fe = NULL; - } - } -} - - -static int skystar2_probe(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - struct adapter *adapter; - struct dvb_adapter *dvb_adapter; - struct dvb_demux *dvbdemux; - struct dmx_demux *dmx; - int ret = -ENODEV; - - if (!pdev) - goto out; - - ret = driver_initialize(pdev); - if (ret < 0) - goto out; - - adapter = pci_get_drvdata(pdev); - dvb_adapter = &adapter->dvb_adapter; - - ret = dvb_register_adapter(dvb_adapter, skystar2_pci_driver.name, - THIS_MODULE); - if (ret < 0) { - printk("%s: Error registering DVB adapter\n", __FUNCTION__); - goto err_halt; - } - - dvb_adapter->priv = adapter; - - - init_MUTEX(&adapter->i2c_sem); - - - memset(&adapter->i2c_adap, 0, sizeof(struct i2c_adapter)); - strcpy(adapter->i2c_adap.name, "SkyStar2"); - - i2c_set_adapdata(&adapter->i2c_adap, adapter); - -#ifdef I2C_ADAP_CLASS_TV_DIGITAL - adapter->i2c_adap.class = I2C_ADAP_CLASS_TV_DIGITAL; -#else - adapter->i2c_adap.class = I2C_CLASS_TV_DIGITAL; -#endif - adapter->i2c_adap.algo = &flexcop_algo; - adapter->i2c_adap.algo_data = NULL; - adapter->i2c_adap.id = I2C_ALGO_BIT; - - ret = i2c_add_adapter(&adapter->i2c_adap); - if (ret < 0) - goto err_dvb_unregister; - - dvbdemux = &adapter->demux; - - dvbdemux->priv = adapter; - dvbdemux->filternum = N_PID_SLOTS; - dvbdemux->feednum = N_PID_SLOTS; - dvbdemux->start_feed = dvb_start_feed; - dvbdemux->stop_feed = dvb_stop_feed; - dvbdemux->write_to_decoder = NULL; - dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); - - ret = dvb_dmx_init(&adapter->demux); - if (ret < 0) - goto err_i2c_del; - - dmx = &dvbdemux->dmx; - - adapter->hw_frontend.source = DMX_FRONTEND_0; - adapter->dmxdev.filternum = N_PID_SLOTS; - adapter->dmxdev.demux = dmx; - adapter->dmxdev.capabilities = 0; - - ret = dvb_dmxdev_init(&adapter->dmxdev, &adapter->dvb_adapter); - if (ret < 0) - goto err_dmx_release; - - ret = dmx->add_frontend(dmx, &adapter->hw_frontend); - if (ret < 0) - goto err_dmxdev_release; - - adapter->mem_frontend.source = DMX_MEMORY_FE; - - ret = dmx->add_frontend(dmx, &adapter->mem_frontend); - if (ret < 0) - goto err_remove_hw_frontend; - - ret = dmx->connect_frontend(dmx, &adapter->hw_frontend); - if (ret < 0) - goto err_remove_mem_frontend; - - dvb_net_init(&adapter->dvb_adapter, &adapter->dvbnet, &dvbdemux->dmx); - - frontend_init(adapter); -out: - return ret; - -err_remove_mem_frontend: - dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &adapter->mem_frontend); -err_remove_hw_frontend: - dvbdemux->dmx.remove_frontend(&dvbdemux->dmx, &adapter->hw_frontend); -err_dmxdev_release: - dvb_dmxdev_release(&adapter->dmxdev); -err_dmx_release: - dvb_dmx_release(&adapter->demux); -err_i2c_del: - i2c_del_adapter(&adapter->i2c_adap); -err_dvb_unregister: - dvb_unregister_adapter(&adapter->dvb_adapter); -err_halt: - driver_halt(pdev); - goto out; -} - -static void skystar2_remove(struct pci_dev *pdev) -{ - struct adapter *adapter = pci_get_drvdata(pdev); - struct dvb_demux *dvbdemux; - struct dmx_demux *dmx; - - if (!adapter) - return; - - dvb_net_release(&adapter->dvbnet); - dvbdemux = &adapter->demux; - dmx = &dvbdemux->dmx; - - dmx->close(dmx); - dmx->remove_frontend(dmx, &adapter->hw_frontend); - dmx->remove_frontend(dmx, &adapter->mem_frontend); - - dvb_dmxdev_release(&adapter->dmxdev); - dvb_dmx_release(dvbdemux); - - if (adapter->fe != NULL) - dvb_unregister_frontend(adapter->fe); - - dvb_unregister_adapter(&adapter->dvb_adapter); - - i2c_del_adapter(&adapter->i2c_adap); - - driver_halt(pdev); - } - -static struct pci_device_id skystar2_pci_tbl[] = { - {0x000013d0, 0x00002103, 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, 0x00000000}, -/* {0x000013d0, 0x00002200, 0xffffffff, 0xffffffff, 0x00000000, 0x00000000, 0x00000000}, UNDEFINED HARDWARE - mail linuxtv.org list */ //FCIII - {0,}, -}; - -MODULE_DEVICE_TABLE(pci, skystar2_pci_tbl); - -static struct pci_driver skystar2_pci_driver = { - .name = "SkyStar2", - .id_table = skystar2_pci_tbl, - .probe = skystar2_probe, - .remove = skystar2_remove, -}; - -static int skystar2_init(void) -{ - return pci_register_driver(&skystar2_pci_driver); -} - -static void skystar2_cleanup(void) -{ - pci_unregister_driver(&skystar2_pci_driver); -} - -module_init(skystar2_init); -module_exit(skystar2_cleanup); - -MODULE_DESCRIPTION("Technisat SkyStar2 DVB PCI Driver"); -MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/bt8xx/dst.c b/drivers/media/dvb/bt8xx/dst.c index 1339912c308b..07a0b0a968a6 100644 --- a/drivers/media/dvb/bt8xx/dst.c +++ b/drivers/media/dvb/bt8xx/dst.c @@ -258,10 +258,10 @@ int write_dst(struct dst_state *state, u8 *data, u8 len) if (debug && (verbose > 4)) { u8 i; if (verbose > 4) { - dprintk("%s writing", __FUNCTION__); + dprintk("%s writing [ ", __FUNCTION__); for (i = 0; i < len; i++) - dprintk(" %02x", data[i]); - dprintk("\n"); + dprintk("%02x ", data[i]); + dprintk("]\n"); } } for (cnt = 0; cnt < 2; cnt++) { @@ -320,10 +320,29 @@ int read_dst(struct dst_state *state, u8 * ret, u8 len) } EXPORT_SYMBOL(read_dst); -static int dst_set_freq(struct dst_state *state, u32 freq) +static int dst_set_polarization(struct dst_state *state) { - u8 *val; + switch (state->voltage) { + case SEC_VOLTAGE_13: // vertical + printk("%s: Polarization=[Vertical]\n", __FUNCTION__); + state->tx_tuna[8] &= ~0x40; //1 + break; + + case SEC_VOLTAGE_18: // horizontal + printk("%s: Polarization=[Horizontal]\n", __FUNCTION__); + state->tx_tuna[8] |= 0x40; // 0 + break; + + case SEC_VOLTAGE_OFF: + + break; + } + + return 0; +} +static int dst_set_freq(struct dst_state *state, u32 freq) +{ state->frequency = freq; if (debug > 4) dprintk("%s: set Frequency %u\n", __FUNCTION__, freq); @@ -332,46 +351,30 @@ static int dst_set_freq(struct dst_state *state, u32 freq) freq = freq / 1000; if (freq < 950 || freq > 2150) return -EINVAL; - val = &state->tx_tuna[0]; - val[2] = (freq >> 8) & 0x7f; - val[3] = (u8) freq; - val[4] = 1; - val[8] &= ~4; - if (freq < 1531) - val[8] |= 4; + + state->tx_tuna[2] = (freq >> 8); + state->tx_tuna[3] = (u8) freq; + state->tx_tuna[4] = 0x01; + state->tx_tuna[8] &= ~0x04; + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) { + if (freq < 1531) + state->tx_tuna[8] |= 0x04; + } + } else if (state->dst_type == DST_TYPE_IS_TERR) { freq = freq / 1000; if (freq < 137000 || freq > 858000) return -EINVAL; - val = &state->tx_tuna[0]; - val[2] = (freq >> 16) & 0xff; - val[3] = (freq >> 8) & 0xff; - val[4] = (u8) freq; - val[5] = 0; - switch (state->bandwidth) { - case BANDWIDTH_6_MHZ: - val[6] = 6; - break; - case BANDWIDTH_7_MHZ: - case BANDWIDTH_AUTO: - val[6] = 7; - break; + state->tx_tuna[2] = (freq >> 16) & 0xff; + state->tx_tuna[3] = (freq >> 8) & 0xff; + state->tx_tuna[4] = (u8) freq; - case BANDWIDTH_8_MHZ: - val[6] = 8; - break; - } - - val[7] = 0; - val[8] = 0; } else if (state->dst_type == DST_TYPE_IS_CABLE) { - /* guess till will get one */ - freq = freq / 1000; - val = &state->tx_tuna[0]; - val[2] = (freq >> 16) & 0xff; - val[3] = (freq >> 8) & 0xff; - val[4] = (u8) freq; + state->tx_tuna[2] = (freq >> 16) & 0xff; + state->tx_tuna[3] = (freq >> 8) & 0xff; + state->tx_tuna[4] = (u8) freq; + } else return -EINVAL; return 0; @@ -379,51 +382,58 @@ static int dst_set_freq(struct dst_state *state, u32 freq) static int dst_set_bandwidth(struct dst_state* state, fe_bandwidth_t bandwidth) { - u8 *val; - state->bandwidth = bandwidth; if (state->dst_type != DST_TYPE_IS_TERR) return 0; - val = &state->tx_tuna[0]; switch (bandwidth) { - case BANDWIDTH_6_MHZ: - val[6] = 6; - break; + case BANDWIDTH_6_MHZ: + if (state->dst_hw_cap & DST_TYPE_HAS_CA) + state->tx_tuna[7] = 0x06; + else { + state->tx_tuna[6] = 0x06; + state->tx_tuna[7] = 0x00; + } + break; - case BANDWIDTH_7_MHZ: - val[6] = 7; - break; + case BANDWIDTH_7_MHZ: + if (state->dst_hw_cap & DST_TYPE_HAS_CA) + state->tx_tuna[7] = 0x07; + else { + state->tx_tuna[6] = 0x07; + state->tx_tuna[7] = 0x00; + } + break; - case BANDWIDTH_8_MHZ: - val[6] = 8; - break; + case BANDWIDTH_8_MHZ: + if (state->dst_hw_cap & DST_TYPE_HAS_CA) + state->tx_tuna[7] = 0x08; + else { + state->tx_tuna[6] = 0x08; + state->tx_tuna[7] = 0x00; + } + break; - default: - return -EINVAL; + default: + return -EINVAL; } return 0; } static int dst_set_inversion(struct dst_state* state, fe_spectral_inversion_t inversion) { - u8 *val; - state->inversion = inversion; - - val = &state->tx_tuna[0]; - - val[8] &= ~0x80; - switch (inversion) { - case INVERSION_OFF: - break; - case INVERSION_ON: - val[8] |= 0x80; - break; - default: - return -EINVAL; + case INVERSION_OFF: // Inversion = Normal + state->tx_tuna[8] &= ~0x80; + break; + + case INVERSION_ON: + state->tx_tuna[8] |= 0x80; + break; + default: + return -EINVAL; } return 0; } @@ -478,6 +488,52 @@ static int dst_set_symbolrate(struct dst_state* state, u32 srate) return 0; } + +static int dst_set_modulation(struct dst_state *state, fe_modulation_t modulation) +{ + if (state->dst_type != DST_TYPE_IS_CABLE) + return 0; + + state->modulation = modulation; + switch (modulation) { + case QAM_16: + state->tx_tuna[8] = 0x10; + break; + + case QAM_32: + state->tx_tuna[8] = 0x20; + break; + + case QAM_64: + state->tx_tuna[8] = 0x40; + break; + + case QAM_128: + state->tx_tuna[8] = 0x80; + break; + + case QAM_256: + state->tx_tuna[8] = 0x00; + break; + + case QPSK: + case QAM_AUTO: + case VSB_8: + case VSB_16: + default: + return -EINVAL; + + } + + return 0; +} + +static fe_modulation_t dst_get_modulation(struct dst_state *state) +{ + return state->modulation; +} + + u8 dst_check_sum(u8 * buf, u32 len) { u32 i; @@ -577,7 +633,7 @@ struct dst_types dst_tlist[] = { .device_id = "200103A", .offset = 0, .dst_type = DST_TYPE_IS_SAT, - .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1, + .type_flags = DST_TYPE_HAS_SYMDIV | DST_TYPE_HAS_FW_1 | DST_TYPE_HAS_OBS_REGS, .dst_feature = 0 }, /* obsolete */ @@ -626,7 +682,7 @@ struct dst_types dst_tlist[] = { .device_id = "DSTMCI", .offset = 1, .dst_type = DST_TYPE_IS_SAT, - .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD, + .type_flags = DST_TYPE_HAS_NEWTUNE | DST_TYPE_HAS_FW_2 | DST_TYPE_HAS_FW_BUILD | DST_TYPE_HAS_INC_COUNT, .dst_feature = DST_TYPE_HAS_CA | DST_TYPE_HAS_DISEQC3 | DST_TYPE_HAS_DISEQC4 | DST_TYPE_HAS_MOTO | DST_TYPE_HAS_MAC }, @@ -872,7 +928,7 @@ static int dst_get_signal(struct dst_state* state) { int retval; u8 get_signal[] = { 0x00, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0xfb }; - + dprintk("%s: Getting Signal strength and other parameters\n", __FUNCTION__); if ((state->diseq_flags & ATTEMPT_TUNE) == 0) { state->decode_lock = state->decode_strength = state->decode_snr = 0; return 0; @@ -954,15 +1010,8 @@ static int dst_get_tuna(struct dst_state* state) state->decode_freq = ((state->rx_tuna[2] & 0x7f) << 8) + state->rx_tuna[3]; state->decode_lock = 1; - /* - dst->decode_n1 = (dst->rx_tuna[4] << 8) + - (dst->rx_tuna[5]); - - dst->decode_n2 = (dst->rx_tuna[8] << 8) + - (dst->rx_tuna[7]); - */ state->diseq_flags |= HAS_LOCK; - /* dst->cur_jiff = jiffies; */ + return 1; } @@ -1098,7 +1147,11 @@ static int dst_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) switch (tone) { case SEC_TONE_OFF: - state->tx_tuna[2] = 0xff; + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) + state->tx_tuna[2] = 0x00; + else + state->tx_tuna[2] = 0xff; + break; case SEC_TONE_ON: @@ -1145,7 +1198,8 @@ static int dst_init(struct dvb_frontend* fe) static u8 ini_tvci_tuna[] = { 9, 0, 3, 0xb6, 1, 7, 0x0, 0x0, 0, 0 }; static u8 ini_cabfta_tuna[] = { 0, 0, 3, 0xb6, 1, 7, 0x0, 0x0, 0, 0 }; static u8 ini_cabci_tuna[] = { 9, 0, 3, 0xb6, 1, 7, 0x0, 0x0, 0, 0 }; - state->inversion = INVERSION_ON; +// state->inversion = INVERSION_ON; + state->inversion = INVERSION_OFF; state->voltage = SEC_VOLTAGE_13; state->tone = SEC_TONE_OFF; state->symbol_rate = 29473000; @@ -1174,7 +1228,7 @@ static int dst_read_status(struct dvb_frontend* fe, fe_status_t* status) *status = 0; if (state->diseq_flags & HAS_LOCK) { - dst_get_signal(state); +// dst_get_signal(state); // don't require(?) to ask MCU if (state->decode_lock) *status |= FE_HAS_LOCK | FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_SYNC | FE_HAS_VITERBI; } @@ -1208,20 +1262,25 @@ static int dst_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet dst_set_freq(state, p->frequency); if (verbose > 4) - dprintk("Set Frequency = [%d]\n", p->frequency); + dprintk("Set Frequency=[%d]\n", p->frequency); - dst_set_inversion(state, p->inversion); +// dst_set_inversion(state, p->inversion); if (state->dst_type == DST_TYPE_IS_SAT) { + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) + dst_set_inversion(state, p->inversion); + dst_set_fec(state, p->u.qpsk.fec_inner); dst_set_symbolrate(state, p->u.qpsk.symbol_rate); + dst_set_polarization(state); if (verbose > 4) - dprintk("Set Symbolrate = [%d]\n", p->u.qpsk.symbol_rate); + dprintk("Set Symbolrate=[%d]\n", p->u.qpsk.symbol_rate); } else if (state->dst_type == DST_TYPE_IS_TERR) { dst_set_bandwidth(state, p->u.ofdm.bandwidth); } else if (state->dst_type == DST_TYPE_IS_CABLE) { dst_set_fec(state, p->u.qam.fec_inner); dst_set_symbolrate(state, p->u.qam.symbol_rate); + dst_set_modulation(state, p->u.qam.modulation); } dst_write_tuna(fe); @@ -1233,8 +1292,11 @@ static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet struct dst_state* state = fe->demodulator_priv; p->frequency = state->decode_freq; - p->inversion = state->inversion; +// p->inversion = state->inversion; if (state->dst_type == DST_TYPE_IS_SAT) { + if (state->type_flags & DST_TYPE_HAS_OBS_REGS) + p->inversion = state->inversion; + p->u.qpsk.symbol_rate = state->symbol_rate; p->u.qpsk.fec_inner = dst_get_fec(state); } else if (state->dst_type == DST_TYPE_IS_TERR) { @@ -1242,7 +1304,8 @@ static int dst_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_paramet } else if (state->dst_type == DST_TYPE_IS_CABLE) { p->u.qam.symbol_rate = state->symbol_rate; p->u.qam.fec_inner = dst_get_fec(state); - p->u.qam.modulation = QAM_AUTO; +// p->u.qam.modulation = QAM_AUTO; + p->u.qam.modulation = dst_get_modulation(state); } return 0; diff --git a/drivers/media/dvb/bt8xx/dst_ca.c b/drivers/media/dvb/bt8xx/dst_ca.c index d781504cc2fa..bfaacd5fc20f 100644 --- a/drivers/media/dvb/bt8xx/dst_ca.c +++ b/drivers/media/dvb/bt8xx/dst_ca.c @@ -32,7 +32,7 @@ #include "dst_ca.h" #include "dst_common.h" -static unsigned int verbose = 1; +static unsigned int verbose = 5; module_param(verbose, int, 0644); MODULE_PARM_DESC(verbose, "verbose startup messages, default is 1 (yes)"); @@ -295,34 +295,28 @@ static int ca_get_message(struct dst_state *state, struct ca_msg *p_ca_message, return 0; } -static int handle_en50221_tag(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer) +static int handle_dst_tag(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u32 length) { if (state->dst_hw_cap & DST_TYPE_HAS_SESSION) { hw_buffer->msg[2] = p_ca_message->msg[1]; /* MSB */ hw_buffer->msg[3] = p_ca_message->msg[2]; /* LSB */ } else { + hw_buffer->msg[0] = (length & 0xff) + 7; + hw_buffer->msg[1] = 0x40; hw_buffer->msg[2] = 0x03; hw_buffer->msg[3] = 0x00; + hw_buffer->msg[4] = 0x03; + hw_buffer->msg[5] = length & 0xff; + hw_buffer->msg[6] = 0x00; } return 0; } -static int debug_8820_buffer(struct ca_msg *hw_buffer) -{ - unsigned int i; - - dprintk("%s:Debug=[", __FUNCTION__); - for (i = 0; i < (hw_buffer->msg[0] + 1); i++) - dprintk(" %02x", hw_buffer->msg[i]); - dprintk("]\n"); - - return 0; -} -static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 reply) +static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 length, u8 reply) { - if ((dst_put_ci(state, hw_buffer->msg, (hw_buffer->length + 1), hw_buffer->msg, reply)) < 0) { + if ((dst_put_ci(state, hw_buffer->msg, length, hw_buffer->msg, reply)) < 0) { dprintk("%s: DST-CI Command failed.\n", __FUNCTION__); dprintk("%s: Resetting DST.\n", __FUNCTION__); rdc_reset_state(state); @@ -334,234 +328,141 @@ static int write_to_8820(struct dst_state *state, struct ca_msg *hw_buffer, u8 r return 0; } - -static int ca_set_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u8 reply, u8 query) +u32 asn_1_decode(u8 *asn_1_array) { - u32 hw_offset, buf_offset, i, k; - u32 program_info_length = 0, es_info_length = 0, length = 0, words = 0; - u8 found_prog_ca_desc = 0, found_stream_ca_desc = 0, error_condition = 0, hw_buffer_length = 0; - - if (verbose > 3) - dprintk("%s, p_ca_message length %d (0x%x)\n", __FUNCTION__,p_ca_message->length,p_ca_message->length ); - - handle_en50221_tag(state, p_ca_message, hw_buffer); /* EN50221 tag */ - - /* Handle the length field (variable) */ - if (!(p_ca_message->msg[3] & 0x80)) { /* Length = 1 */ - length = p_ca_message->msg[3] & 0x7f; - words = 0; /* domi's suggestion */ - } - else { /* Length = words */ - words = p_ca_message->msg[3] & 0x7f; - for (i = 0; i < words; i++) { - length = length << 8; - length = length | p_ca_message->msg[4 + i]; + u8 length_field = 0, word_count = 0, count = 0; + u32 length = 0; + + length_field = asn_1_array[0]; + dprintk("%s: Length field=[%02x]\n", __FUNCTION__, length_field); + if (length_field < 0x80) { + length = length_field & 0x7f; + dprintk("%s: Length=[%02x]\n", __FUNCTION__, length); + } else { + word_count = length_field & 0x7f; + for (count = 0; count < word_count; count++) { + length = (length | asn_1_array[count + 1]) << 8; + dprintk("%s: Length=[%04x]\n", __FUNCTION__, length); } } - if (verbose > 4) { - dprintk("%s:Length=[%d (0x%x)], Words=[%d]\n", __FUNCTION__, length,length, words); - - /* Debug Input string */ - for (i = 0; i < length; i++) - dprintk(" %02x", p_ca_message->msg[i]); - dprintk("]\n"); - } - - hw_offset = 7; - buf_offset = words + 4; - - /* Program Header */ - if (verbose > 4) - dprintk("\n%s:Program Header=[", __FUNCTION__); - for (i = 0; i < 6; i++) { - hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; - if (verbose > 4) - dprintk(" %02x", p_ca_message->msg[buf_offset]); - hw_offset++, buf_offset++, hw_buffer_length++; - } - if (verbose > 4) - dprintk("]\n"); + return length; +} - program_info_length = 0; - program_info_length = (((program_info_length | p_ca_message->msg[words + 8]) & 0x0f) << 8) | p_ca_message->msg[words + 9]; - if (verbose > 4) - dprintk("%s:Program info Length=[%d][%02x], hw_offset=[%d], buf_offset=[%d] \n", - __FUNCTION__, program_info_length, program_info_length, hw_offset, buf_offset); +static int init_buffer(u8 *buffer, u32 length) +{ + u32 i; + for (i = 0; i < length; i++) + buffer[i] = 0; - if (program_info_length && (program_info_length < 256)) { /* If program_info_length */ - hw_buffer->msg[11] = hw_buffer->msg[11] & 0x0f; /* req only 4 bits */ - hw_buffer->msg[12] = hw_buffer->msg[12] + 1; /* increment! ASIC bug! */ + return 0; +} - if (p_ca_message->msg[buf_offset + 1] == 0x09) { /* Check CA descriptor */ - found_prog_ca_desc = 1; - if (verbose > 4) - dprintk("%s: Found CA descriptor @ Program level\n", __FUNCTION__); - } +static int debug_string(u8 *msg, u32 length, u32 offset) +{ + u32 i; - if (found_prog_ca_desc) { /* Command only if CA descriptor */ - hw_buffer->msg[13] = p_ca_message->msg[buf_offset]; /* CA PMT command ID */ - hw_offset++, buf_offset++, hw_buffer_length++; - } + dprintk(" String=[ "); + for (i = offset; i < length; i++) + dprintk("%02x ", msg[i]); + dprintk("]\n"); - /* Program descriptors */ - if (verbose > 4) { - dprintk("%s:**********>buf_offset=[%d], hw_offset=[%d]\n", __FUNCTION__, buf_offset, hw_offset); - dprintk("%s:Program descriptors=[", __FUNCTION__); - } - while (program_info_length && !error_condition) { /* Copy prog descriptors */ - if (program_info_length > p_ca_message->length) { /* Error situation */ - dprintk ("%s:\"WARNING\" Length error, line=[%d], prog_info_length=[%d]\n", - __FUNCTION__, __LINE__, program_info_length); - dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__); - error_condition = 1; - break; - } + return 0; +} - hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; - dprintk(" %02x", p_ca_message->msg[buf_offset]); - hw_offset++, buf_offset++, hw_buffer_length++, program_info_length--; - } - if (verbose > 4) { - dprintk("]\n"); - dprintk("%s:**********>buf_offset=[%d], hw_offset=[%d]\n", __FUNCTION__, buf_offset, hw_offset); - } - if (found_prog_ca_desc) { - if (!reply) { - hw_buffer->msg[13] = 0x01; /* OK descrambling */ - if (verbose > 1) - dprintk("CA PMT Command = OK Descrambling\n"); - } - else { - hw_buffer->msg[13] = 0x02; /* Ok MMI */ - if (verbose > 1) - dprintk("CA PMT Command = Ok MMI\n"); - } - if (query) { - hw_buffer->msg[13] = 0x03; /* Query */ - if (verbose > 1) - dprintk("CA PMT Command = CA PMT query\n"); - } - } - } - else { - hw_buffer->msg[11] = hw_buffer->msg[11] & 0xf0; /* Don't write to ASIC */ - hw_buffer->msg[12] = hw_buffer->msg[12] = 0x00; +static int copy_string(u8 *destination, u8 *source, u32 dest_offset, u32 source_offset, u32 length) +{ + u32 i; + dprintk("%s: Copying [", __FUNCTION__); + for (i = 0; i < length; i++) { + destination[i + dest_offset] = source[i + source_offset]; + dprintk(" %02x", source[i + source_offset]); } - if (verbose > 4) - dprintk("%s:**********>p_ca_message->length=[%d], buf_offset=[%d], hw_offset=[%d]\n", - __FUNCTION__, p_ca_message->length, buf_offset, hw_offset); - - while ((buf_offset < p_ca_message->length) && !error_condition) { - /* Bail out in case of an indefinite loop */ - if ((es_info_length > p_ca_message->length) || (buf_offset > p_ca_message->length)) { - dprintk("%s:\"WARNING\" Length error, line=[%d], prog_info_length=[%d], buf_offset=[%d]\n", - __FUNCTION__, __LINE__, program_info_length, buf_offset); - - dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__); - error_condition = 1; - break; - } - - /* Stream Header */ - - for (k = 0; k < 5; k++) { - hw_buffer->msg[hw_offset + k] = p_ca_message->msg[buf_offset + k]; - } + dprintk("]\n"); - es_info_length = 0; - es_info_length = (es_info_length | (p_ca_message->msg[buf_offset + 3] & 0x0f)) << 8 | p_ca_message->msg[buf_offset + 4]; + return i; +} - if (verbose > 4) { - dprintk("\n%s:----->Stream header=[%02x %02x %02x %02x %02x]\n", __FUNCTION__, - p_ca_message->msg[buf_offset + 0], p_ca_message->msg[buf_offset + 1], - p_ca_message->msg[buf_offset + 2], p_ca_message->msg[buf_offset + 3], - p_ca_message->msg[buf_offset + 4]); +static int modify_4_bits(u8 *message, u32 pos) +{ + message[pos] &= 0x0f; - dprintk("%s:----->Stream type=[%02x], es length=[%d (0x%x)], Chars=[%02x] [%02x], buf_offset=[%d]\n", __FUNCTION__, - p_ca_message->msg[buf_offset + 0], es_info_length, es_info_length, - p_ca_message->msg[buf_offset + 3], p_ca_message->msg[buf_offset + 4], buf_offset); - } + return 0; +} - hw_buffer->msg[hw_offset + 3] &= 0x0f; /* req only 4 bits */ - if (found_prog_ca_desc) { - hw_buffer->msg[hw_offset + 3] = 0x00; - hw_buffer->msg[hw_offset + 4] = 0x00; - } - hw_offset += 5, buf_offset += 5, hw_buffer_length += 5; +static int ca_set_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer, u8 reply, u8 query) +{ + u32 length = 0, count = 0; + u8 asn_1_words, program_header_length; + u16 program_info_length = 0, es_info_length = 0; + u32 hw_offset = 0, buf_offset = 0, i; + u8 dst_tag_length; - /* Check for CA descriptor */ - if (p_ca_message->msg[buf_offset + 1] == 0x09) { - if (verbose > 4) - dprintk("%s:Found CA descriptor @ Stream level\n", __FUNCTION__); - found_stream_ca_desc = 1; - } + length = asn_1_decode(&p_ca_message->msg[3]); + dprintk("%s: CA Message length=[%d]\n", __FUNCTION__, length); + dprintk("%s: ASN.1 ", __FUNCTION__); + debug_string(&p_ca_message->msg[4], length, 0); // length does not include tag and length - /* ES descriptors */ - - if (es_info_length && !error_condition && !found_prog_ca_desc && found_stream_ca_desc) { -// if (!ca_pmt_done) { - hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; /* CA PMT cmd(es) */ - if (verbose > 4) - printk("%s:----->CA PMT Command ID=[%02x]\n", __FUNCTION__, p_ca_message->msg[buf_offset]); -// hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--, ca_pmt_done = 1; - hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--; -// } - if (verbose > 4) - dprintk("%s:----->ES descriptors=[", __FUNCTION__); - - while (es_info_length && !error_condition) { /* ES descriptors */ - if ((es_info_length > p_ca_message->length) || (buf_offset > p_ca_message->length)) { - if (verbose > 4) { - dprintk("%s:\"WARNING\" ES Length error, line=[%d], es_info_length=[%d], buf_offset=[%d]\n", - __FUNCTION__, __LINE__, es_info_length, buf_offset); - - dprintk("%s:\"WARNING\" Bailing out of possible loop\n", __FUNCTION__); - } - error_condition = 1; - break; - } + init_buffer(hw_buffer->msg, length); + handle_dst_tag(state, p_ca_message, hw_buffer, length); - hw_buffer->msg[hw_offset] = p_ca_message->msg[buf_offset]; - if (verbose > 3) - dprintk("%02x ", hw_buffer->msg[hw_offset]); - hw_offset++, buf_offset++, hw_buffer_length++, es_info_length--; - } - found_stream_ca_desc = 0; /* unset for new streams */ - dprintk("]\n"); + hw_offset = 7; + asn_1_words = 1; // just a hack to test, should compute this one + buf_offset = 3; + program_header_length = 6; + dst_tag_length = 7; + +// debug_twinhan_ca_params(state, p_ca_message, hw_buffer, reply, query, length, hw_offset, buf_offset); +// dprintk("%s: Program Header(BUF)", __FUNCTION__); +// debug_string(&p_ca_message->msg[4], program_header_length, 0); +// dprintk("%s: Copying Program header\n", __FUNCTION__); + copy_string(hw_buffer->msg, p_ca_message->msg, hw_offset, (buf_offset + asn_1_words), program_header_length); + buf_offset += program_header_length, hw_offset += program_header_length; + modify_4_bits(hw_buffer->msg, (hw_offset - 2)); + if (state->type_flags & DST_TYPE_HAS_INC_COUNT) { // workaround + dprintk("%s: Probably an ASIC bug !!!\n", __FUNCTION__); + debug_string(hw_buffer->msg, (hw_offset + program_header_length), 0); + hw_buffer->msg[hw_offset - 1] += 1; + } + +// dprintk("%s: Program Header(HW), Count=[%d]", __FUNCTION__, count); +// debug_string(hw_buffer->msg, hw_offset, 0); + + program_info_length = ((program_info_length | (p_ca_message->msg[buf_offset - 1] & 0x0f)) << 8) | p_ca_message->msg[buf_offset]; + dprintk("%s: Program info length=[%02x]\n", __FUNCTION__, program_info_length); + if (program_info_length) { + count = copy_string(hw_buffer->msg, p_ca_message->msg, hw_offset, (buf_offset + 1), (program_info_length + 1) ); // copy next elem, not current + buf_offset += count, hw_offset += count; +// dprintk("%s: Program level ", __FUNCTION__); +// debug_string(hw_buffer->msg, hw_offset, 0); + } + + buf_offset += 1;// hw_offset += 1; + for (i = buf_offset; i < length; i++) { +// dprintk("%s: Stream Header ", __FUNCTION__); + count = copy_string(hw_buffer->msg, p_ca_message->msg, hw_offset, buf_offset, 5); + modify_4_bits(hw_buffer->msg, (hw_offset + 3)); + + hw_offset += 5, buf_offset += 5, i += 4; +// debug_string(hw_buffer->msg, hw_offset, (hw_offset - 5)); + es_info_length = ((es_info_length | (p_ca_message->msg[buf_offset - 1] & 0x0f)) << 8) | p_ca_message->msg[buf_offset]; + dprintk("%s: ES info length=[%02x]\n", __FUNCTION__, es_info_length); + if (es_info_length) { + // copy descriptors @ STREAM level + dprintk("%s: Descriptors @ STREAM level...!!! \n", __FUNCTION__); } - } - - /* MCU Magic words */ - - hw_buffer_length += 7; - hw_buffer->msg[0] = hw_buffer_length; - hw_buffer->msg[1] = 64; - hw_buffer->msg[4] = 3; - hw_buffer->msg[5] = hw_buffer->msg[0] - 7; - hw_buffer->msg[6] = 0; - - /* Fix length */ - hw_buffer->length = hw_buffer->msg[0]; - - put_checksum(&hw_buffer->msg[0], hw_buffer->msg[0]); - /* Do the actual write */ - if (verbose > 4) { - dprintk("%s:======================DEBUGGING================================\n", __FUNCTION__); - dprintk("%s: Actual Length=[%d]\n", __FUNCTION__, hw_buffer_length); } - /* Only for debugging! */ - if (verbose > 2) - debug_8820_buffer(hw_buffer); - if (verbose > 3) - dprintk("%s: Reply = [%d]\n", __FUNCTION__, reply); - write_to_8820(state, hw_buffer, reply); + hw_buffer->msg[length + dst_tag_length] = dst_check_sum(hw_buffer->msg, (length + dst_tag_length)); +// dprintk("%s: Total length=[%d], Checksum=[%02x]\n", __FUNCTION__, (length + dst_tag_length), hw_buffer->msg[length + dst_tag_length]); + debug_string(hw_buffer->msg, (length + dst_tag_length + 1), 0); // dst tags also + write_to_8820(state, hw_buffer, (length + dst_tag_length + 1), reply); // checksum return 0; } + /* Board supports CA PMT reply ? */ static int dst_check_ca_pmt(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer) { @@ -605,7 +506,7 @@ static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, struct ca_msg *hw_buffer; if ((hw_buffer = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) { - printk("%s: Memory allocation failure\n", __FUNCTION__); + dprintk("%s: Memory allocation failure\n", __FUNCTION__); return -ENOMEM; } if (verbose > 3) @@ -630,8 +531,10 @@ static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, switch (command) { case CA_PMT: if (verbose > 3) +// dprintk("Command = SEND_CA_PMT\n"); dprintk("Command = SEND_CA_PMT\n"); - if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) { +// if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) { + if ((ca_set_pmt(state, p_ca_message, hw_buffer, 0, 0)) < 0) { // code simplification started dprintk("%s: -->CA_PMT Failed !\n", __FUNCTION__); return -1; } @@ -664,7 +567,7 @@ static int ca_send_message(struct dst_state *state, struct ca_msg *p_ca_message, return -1; } if (verbose > 3) - printk("%s: -->CA_APP_INFO_ENQUIRY Success !\n", __FUNCTION__); + dprintk("%s: -->CA_APP_INFO_ENQUIRY Success !\n", __FUNCTION__); break; } @@ -681,17 +584,17 @@ static int dst_ca_ioctl(struct inode *inode, struct file *file, unsigned int cmd struct ca_msg *p_ca_message; if ((p_ca_message = (struct ca_msg *) kmalloc(sizeof (struct ca_msg), GFP_KERNEL)) == NULL) { - printk("%s: Memory allocation failure\n", __FUNCTION__); + dprintk("%s: Memory allocation failure\n", __FUNCTION__); return -ENOMEM; } if ((p_ca_slot_info = (struct ca_slot_info *) kmalloc(sizeof (struct ca_slot_info), GFP_KERNEL)) == NULL) { - printk("%s: Memory allocation failure\n", __FUNCTION__); + dprintk("%s: Memory allocation failure\n", __FUNCTION__); return -ENOMEM; } if ((p_ca_caps = (struct ca_caps *) kmalloc(sizeof (struct ca_caps), GFP_KERNEL)) == NULL) { - printk("%s: Memory allocation failure\n", __FUNCTION__); + dprintk("%s: Memory allocation failure\n", __FUNCTION__); return -ENOMEM; } diff --git a/drivers/media/dvb/bt8xx/dst_common.h b/drivers/media/dvb/bt8xx/dst_common.h index 0b3da29245fb..ef532a6aceaa 100644 --- a/drivers/media/dvb/bt8xx/dst_common.h +++ b/drivers/media/dvb/bt8xx/dst_common.h @@ -47,6 +47,8 @@ #define DST_TYPE_HAS_FW_2 16 #define DST_TYPE_HAS_FW_3 32 #define DST_TYPE_HAS_FW_BUILD 64 +#define DST_TYPE_HAS_OBS_REGS 128 +#define DST_TYPE_HAS_INC_COUNT 256 /* Card capability list */ @@ -110,6 +112,7 @@ struct dst_state { u32 dst_hw_cap; u8 dst_fw_version; fe_sec_mini_cmd_t minicmd; + fe_modulation_t modulation; u8 messages[256]; }; diff --git a/drivers/media/dvb/cinergyT2/cinergyT2.c b/drivers/media/dvb/cinergyT2/cinergyT2.c index 96c57fde95a0..7d8b3cad350b 100644 --- a/drivers/media/dvb/cinergyT2/cinergyT2.c +++ b/drivers/media/dvb/cinergyT2/cinergyT2.c @@ -699,6 +699,8 @@ static void cinergyt2_query_rc (void *data) for (n=0; len>0 && n<(len/sizeof(rc_events[0])); n++) { int i; +/* dprintk(1,"rc_events[%d].value = %x, type=%x\n",n,le32_to_cpu(rc_events[n].value),rc_events[n].type);*/ + if (rc_events[n].type == CINERGYT2_RC_EVENT_TYPE_NEC && rc_events[n].value == ~0) { @@ -714,7 +716,7 @@ static void cinergyt2_query_rc (void *data) cinergyt2->rc_input_event = KEY_MAX; for (i=0; i<sizeof(rc_keys)/sizeof(rc_keys[0]); i+=3) { if (rc_keys[i+0] == rc_events[n].type && - rc_keys[i+1] == rc_events[n].value) + rc_keys[i+1] == le32_to_cpu(rc_events[n].value)) { cinergyt2->rc_input_event = rc_keys[i+2]; break; diff --git a/drivers/media/dvb/dvb-core/dmxdev.c b/drivers/media/dvb/dvb-core/dmxdev.c index c225de7ffd82..68050cd527cb 100644 --- a/drivers/media/dvb/dvb-core/dmxdev.c +++ b/drivers/media/dvb/dvb-core/dmxdev.c @@ -42,12 +42,6 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off)."); #define dprintk if (debug) printk -static inline struct dmxdev_filter * -dvb_dmxdev_file_to_filter(struct file *file) -{ - return (struct dmxdev_filter *) file->private_data; -} - static inline void dvb_dmxdev_buffer_init(struct dmxdev_buffer *buffer) { buffer->data=NULL; @@ -669,8 +663,10 @@ static int dvb_dmxdev_filter_start(struct dmxdev_filter *filter) ret = filter->feed.ts->start_filtering(filter->feed.ts); - if (ret < 0) + if (ret < 0) { + dmxdev->demux->release_ts_feed(dmxdev->demux, *tsfeed); return ret; + } break; } @@ -842,7 +838,7 @@ static ssize_t dvb_dmxdev_read_sec(struct dmxdev_filter *dfil, static ssize_t dvb_demux_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) { - struct dmxdev_filter *dmxdevfilter=dvb_dmxdev_file_to_filter(file); + struct dmxdev_filter *dmxdevfilter= file->private_data; int ret=0; if (down_interruptible(&dmxdevfilter->mutex)) @@ -863,7 +859,7 @@ dvb_demux_read(struct file *file, char __user *buf, size_t count, loff_t *ppos) static int dvb_demux_do_ioctl(struct inode *inode, struct file *file, unsigned int cmd, void *parg) { - struct dmxdev_filter *dmxdevfilter=dvb_dmxdev_file_to_filter(file); + struct dmxdev_filter *dmxdevfilter = file->private_data; struct dmxdev *dmxdev=dmxdevfilter->dev; unsigned long arg=(unsigned long) parg; int ret=0; @@ -960,7 +956,7 @@ static int dvb_demux_ioctl(struct inode *inode, struct file *file, static unsigned int dvb_demux_poll (struct file *file, poll_table *wait) { - struct dmxdev_filter *dmxdevfilter = dvb_dmxdev_file_to_filter(file); + struct dmxdev_filter *dmxdevfilter = file->private_data; unsigned int mask = 0; if (!dmxdevfilter) @@ -985,7 +981,7 @@ static unsigned int dvb_demux_poll (struct file *file, poll_table *wait) static int dvb_demux_release(struct inode *inode, struct file *file) { - struct dmxdev_filter *dmxdevfilter = dvb_dmxdev_file_to_filter(file); + struct dmxdev_filter *dmxdevfilter = file->private_data; struct dmxdev *dmxdev = dmxdevfilter->dev; return dvb_dmxdev_filter_free(dmxdev, dmxdevfilter); @@ -1109,7 +1105,6 @@ dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter) dvb_dmxdev_filter_state_set(&dmxdev->filter[i], DMXDEV_STATE_FREE); dmxdev->dvr[i].dev=dmxdev; dmxdev->dvr[i].buffer.data=NULL; - dvb_dmxdev_filter_state_set(&dmxdev->filter[i], DMXDEV_STATE_FREE); dvb_dmxdev_dvr_state_set(&dmxdev->dvr[i], DMXDEV_STATE_FREE); } diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.c b/drivers/media/dvb/dvb-core/dvb_frontend.c index f11daae91cd4..a8bc84240b50 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb/dvb-core/dvb_frontend.c @@ -42,6 +42,8 @@ #include "dvb_frontend.h" #include "dvbdev.h" +// #define DEBUG_LOCKLOSS 1 + static int dvb_frontend_debug; static int dvb_shutdown_timeout = 5; static int dvb_force_auto_inversion; @@ -113,6 +115,7 @@ struct dvb_frontend_private { int exit; int wakeup; fe_status_t status; + fe_sec_tone_mode_t tone; }; @@ -434,9 +437,26 @@ static int dvb_frontend_thread(void *data) /* we're tuned, and the lock is still good... */ if (s & FE_HAS_LOCK) continue; - else { - /* if we _WERE_ tuned, but now don't have a lock, - * need to zigzag */ + else { /* if we _WERE_ tuned, but now don't have a lock */ +#ifdef DEBUG_LOCKLOSS + /* first of all try setting the tone again if it was on - this + * sometimes works around problems with noisy power supplies */ + if (fe->ops->set_tone && (fepriv->tone == SEC_TONE_ON)) { + fe->ops->set_tone(fe, fepriv->tone); + mdelay(100); + s = 0; + fe->ops->read_status(fe, &s); + if (s & FE_HAS_LOCK) { + printk("DVB%i: Lock was lost, but regained by setting " + "the tone. This may indicate your power supply " + "is noisy/slightly incompatable with this DVB-S " + "adapter\n", fe->dvb->num); + fepriv->state = FESTATE_TUNED; + continue; + } + } +#endif + /* some other reason for losing the lock - start zigzagging */ fepriv->state = FESTATE_ZIGZAG_FAST; fepriv->started_auto_step = fepriv->auto_step; check_wrapped = 0; @@ -626,11 +646,21 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, break; } - case FE_READ_STATUS: + case FE_READ_STATUS: { + fe_status_t* status = parg; + + /* if retune was requested but hasn't occured yet, prevent + * that user get signal state from previous tuning */ + if(fepriv->state == FESTATE_RETUNE) { + err=0; + *status = 0; + break; + } + if (fe->ops->read_status) - err = fe->ops->read_status(fe, (fe_status_t*) parg); + err = fe->ops->read_status(fe, status); break; - + } case FE_READ_BER: if (fe->ops->read_ber) err = fe->ops->read_ber(fe, (__u32*) parg); @@ -681,6 +711,7 @@ static int dvb_frontend_ioctl(struct inode *inode, struct file *file, err = fe->ops->set_tone(fe, (fe_sec_tone_mode_t) parg); fepriv->state = FESTATE_DISEQC; fepriv->status = 0; + fepriv->tone = (fe_sec_tone_mode_t) parg; } break; @@ -883,6 +914,7 @@ int dvb_register_frontend(struct dvb_adapter* dvb, init_MUTEX (&fepriv->events.sem); fe->dvb = dvb; fepriv->inversion = INVERSION_OFF; + fepriv->tone = SEC_TONE_OFF; printk ("DVB: registering frontend %i (%s)...\n", fe->dvb->num, diff --git a/drivers/media/dvb/dvb-core/dvb_frontend.h b/drivers/media/dvb/dvb-core/dvb_frontend.h index d2b021792791..9c2c1d1136bd 100644 --- a/drivers/media/dvb/dvb-core/dvb_frontend.h +++ b/drivers/media/dvb/dvb-core/dvb_frontend.h @@ -40,28 +40,6 @@ #include "dvbdev.h" -/* FIXME: Move to i2c-id.h */ -#define I2C_DRIVERID_DVBFE_SP8870 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_CX22700 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_AT76C651 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_CX24110 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_CX22702 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_DIB3000MB I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_DST I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_DUMMY I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_L64781 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_MT312 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_MT352 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_NXT6000 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_SP887X I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_STV0299 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_TDA1004X I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_TDA8083 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_VES1820 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_VES1X93 I2C_DRIVERID_EXP2 -#define I2C_DRIVERID_DVBFE_TDA80XX I2C_DRIVERID_EXP2 - - struct dvb_frontend_tune_settings { int min_delay_ms; int step_size; diff --git a/drivers/media/dvb/dvb-usb/Kconfig b/drivers/media/dvb/dvb-usb/Kconfig index 8aa32f6e447b..612e5b087b1c 100644 --- a/drivers/media/dvb/dvb-usb/Kconfig +++ b/drivers/media/dvb/dvb-usb/Kconfig @@ -3,30 +3,35 @@ config DVB_USB depends on DVB_CORE && USB select FW_LOADER help - By enabling this you will be able to choose the various USB 1.1 and - USB2.0 DVB devices. + By enabling this you will be able to choose the various supported + USB1.1 and USB2.0 DVB devices. Almost every USB device needs a firmware, please look into - <file:Documentation/dvb/README.dvb-usb> + <file:Documentation/dvb/README.dvb-usb>. - Say Y if you own an USB DVB device. + For a complete list of supported USB devices see the LinuxTV DVB Wiki: + <http://www.linuxtv.org/wiki/index.php/DVB_USB> + + Say Y if you own a USB DVB device. config DVB_USB_DEBUG bool "Enable extended debug support for all DVB-USB devices" depends on DVB_USB help - Say Y if you want to enable debuging. See modinfo dvb-usb (and the + Say Y if you want to enable debugging. See modinfo dvb-usb (and the appropriate drivers) for debug levels. config DVB_USB_A800 tristate "AVerMedia AverTV DVB-T USB 2.0 (A800)" depends on DVB_USB + select DVB_DIB3000MC help Say Y here to support the AVerMedia AverTV DVB-T USB 2.0 (A800) receiver. config DVB_USB_DIBUSB_MB tristate "DiBcom USB DVB-T devices (based on the DiB3000M-B) (see help for device list)" depends on DVB_USB + select DVB_DIB3000MB help Support for USB 1.1 and 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-B demodulator. @@ -52,6 +57,7 @@ config DVB_USB_DIBUSB_MB config DVB_USB_DIBUSB_MC tristate "DiBcom USB DVB-T devices (based on the DiB3000M-C/P) (see help for device list)" depends on DVB_USB + select DVB_DIB3000MC help Support for 2.0 DVB-T receivers based on reference designs made by DiBcom (<http://www.dibcom.fr>) equipped with a DiB3000M-C/P demodulator. @@ -66,12 +72,23 @@ config DVB_USB_DIBUSB_MC config DVB_USB_UMT_010 tristate "HanfTek UMT-010 DVB-T USB2.0 support" depends on DVB_USB + select DVB_DIB3000MC help Say Y here to support the HanfTek UMT-010 USB2.0 stick-sized DVB-T receiver. +config DVB_USB_CXUSB + tristate "Medion MD95700 hybrid USB2.0 (Conexant) support" + depends on DVB_USB + select DVB_CX22702 + help + Say Y here to support the Medion MD95700 hybrid USB2.0 device. Currently + only the DVB-T part is supported. + config DVB_USB_DIGITV tristate "Nebula Electronics uDigiTV DVB-T USB2.0 support" depends on DVB_USB + select DVB_NXT6000 + select DVB_MT352 help Say Y here to support the Nebula Electronics uDigitV USB2.0 DVB-T receiver. @@ -87,13 +104,16 @@ config DVB_USB_VP7045 config DVB_USB_NOVA_T_USB2 tristate "Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 support" depends on DVB_USB + select DVB_DIB3000MC help Say Y here to support the Hauppauge WinTV-NOVA-T usb2 DVB-T USB2.0 receiver. config DVB_USB_DTT200U - tristate "Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 support" + tristate "WideView WT-200U and WT-220U (pen) DVB-T USB2.0 support (Yakumo/Hama/Typhoon/Yuan)" depends on DVB_USB help - Say Y here to support the Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. + Say Y here to support the WideView/Yakumo/Hama/Typhoon/Yuan DVB-T USB2.0 receiver. The receivers are also known as DTT200U (Yakumo) and UB300 (Yuan). + + The WT-220U and its clones are pen-sized. diff --git a/drivers/media/dvb/dvb-usb/Makefile b/drivers/media/dvb/dvb-usb/Makefile index d65b50f9abb0..746d87ed6f32 100644 --- a/drivers/media/dvb/dvb-usb/Makefile +++ b/drivers/media/dvb/dvb-usb/Makefile @@ -27,4 +27,7 @@ obj-$(CONFIG_DVB_USB_UMT_010) += dvb-usb-dibusb-common.o dvb-usb-umt-010.o dvb-usb-digitv-objs = digitv.o obj-$(CONFIG_DVB_USB_DIGITV) += dvb-usb-digitv.o +dvb-usb-cxusb-objs = cxusb.o +obj-$(CONFIG_DVB_USB_CXUSB) += dvb-usb-cxusb.o + EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/dvb-usb/a800.c b/drivers/media/dvb/dvb-usb/a800.c index a3542935604f..f2fcc2f1f846 100644 --- a/drivers/media/dvb/dvb-usb/a800.c +++ b/drivers/media/dvb/dvb-usb/a800.c @@ -61,6 +61,12 @@ static struct dvb_usb_rc_key a800_rc_keys[] = { { 0x02, 0x00, KEY_LAST }, /* >>| / BLUE */ { 0x02, 0x04, KEY_EPG }, /* EPG */ { 0x02, 0x15, KEY_MENU }, /* MENU */ + + { 0x03, 0x03, KEY_CHANNELUP }, /* CH UP */ + { 0x03, 0x02, KEY_CHANNELDOWN }, /* CH DOWN */ + { 0x03, 0x01, KEY_FIRST }, /* |<< / GREEN */ + { 0x03, 0x00, KEY_LAST }, /* >>| / BLUE */ + }; int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state) @@ -68,7 +74,7 @@ int a800_rc_query(struct dvb_usb_device *d, u32 *event, int *state) u8 key[5]; if (usb_control_msg(d->udev,usb_rcvctrlpipe(d->udev,0), 0x04, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, key, 5, - 2*HZ) != 5) + 2000) != 5) return -ENODEV; /* call the universal NEC remote processor, to find out the key's state and event */ @@ -143,7 +149,7 @@ static struct dvb_usb_properties a800_properties = { static struct usb_driver a800_driver = { .owner = THIS_MODULE, - .name = "AVerMedia AverTV DVB-T USB 2.0 (A800)", + .name = "dvb_usb_a800", .probe = a800_probe, .disconnect = dvb_usb_device_exit, .id_table = a800_table, diff --git a/drivers/media/dvb/dvb-usb/cxusb.c b/drivers/media/dvb/dvb-usb/cxusb.c new file mode 100644 index 000000000000..c3e1b661aae6 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cxusb.c @@ -0,0 +1,295 @@ +/* DVB USB compliant linux driver for Conexant USB reference design. + * + * The Conexant reference design I saw on their website was only for analogue + * capturing (using the cx25842). The box I took to write this driver (reverse + * engineered) is the one labeled Medion MD95700. In addition to the cx25842 + * for analogue capturing it also has a cx22702 DVB-T demodulator on the main + * board. Besides it has a atiremote (X10) and a USB2.0 hub onboard. + * + * Maybe it is a little bit premature to call this driver cxusb, but I assume + * the USB protocol is identical or at least inherited from the reference + * design, so it can be reused for the "analogue-only" device (if it will + * appear at all). + * + * TODO: check if the cx25840-driver (from ivtv) can be used for the analogue + * part + * + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the Free + * Software Foundation, version 2. + * + * see Documentation/dvb/README.dvb-usb for more information + */ +#include "cxusb.h" + +#include "cx22702.h" + +/* debug */ +int dvb_usb_cxusb_debug; +module_param_named(debug,dvb_usb_cxusb_debug, int, 0644); +MODULE_PARM_DESC(debug, "set debugging level (1=rc (or-able))." DVB_USB_DEBUG_STATUS); + +static int cxusb_ctrl_msg(struct dvb_usb_device *d, + u8 cmd, u8 *wbuf, int wlen, u8 *rbuf, int rlen) +{ + int wo = (rbuf == NULL || rlen == 0); /* write-only */ + u8 sndbuf[1+wlen]; + memset(sndbuf,0,1+wlen); + + sndbuf[0] = cmd; + memcpy(&sndbuf[1],wbuf,wlen); + if (wo) + dvb_usb_generic_write(d,sndbuf,1+wlen); + else + dvb_usb_generic_rw(d,sndbuf,1+wlen,rbuf,rlen,0); + + return 0; +} + +/* I2C */ +static void cxusb_set_i2c_path(struct dvb_usb_device *d, enum cxusb_i2c_pathes path) +{ + struct cxusb_state *st = d->priv; + u8 o[2],i; + + if (path == st->cur_i2c_path) + return; + + o[0] = IOCTL_SET_I2C_PATH; + switch (path) { + case PATH_CX22702: + o[1] = 0; + break; + case PATH_TUNER_OTHER: + o[1] = 1; + break; + default: + err("unkown i2c path"); + return; + } + cxusb_ctrl_msg(d,CMD_IOCTL,o,2,&i,1); + + if (i != 0x01) + deb_info("i2c_path setting failed.\n"); + + st->cur_i2c_path = path; +} + +static int cxusb_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num) +{ + struct dvb_usb_device *d = i2c_get_adapdata(adap); + int i; + + if (down_interruptible(&d->i2c_sem) < 0) + return -EAGAIN; + + if (num > 2) + warn("more than 2 i2c messages at a time is not handled yet. TODO."); + + for (i = 0; i < num; i++) { + + switch (msg[i].addr) { + case 0x63: + cxusb_set_i2c_path(d,PATH_CX22702); + break; + default: + cxusb_set_i2c_path(d,PATH_TUNER_OTHER); + break; + } + + /* read request */ + if (i+1 < num && (msg[i+1].flags & I2C_M_RD)) { + u8 obuf[3+msg[i].len], ibuf[1+msg[i+1].len]; + obuf[0] = msg[i].len; + obuf[1] = msg[i+1].len; + obuf[2] = msg[i].addr; + memcpy(&obuf[3],msg[i].buf,msg[i].len); + + if (cxusb_ctrl_msg(d, CMD_I2C_READ, + obuf, 3+msg[i].len, + ibuf, 1+msg[i+1].len) < 0) + break; + + if (ibuf[0] != 0x08) + deb_info("i2c read could have been failed\n"); + + memcpy(msg[i+1].buf,&ibuf[1],msg[i+1].len); + + i++; + } else { /* write */ + u8 obuf[2+msg[i].len], ibuf; + obuf[0] = msg[i].addr; + obuf[1] = msg[i].len; + memcpy(&obuf[2],msg[i].buf,msg[i].len); + + if (cxusb_ctrl_msg(d,CMD_I2C_WRITE, obuf, 2+msg[i].len, &ibuf,1) < 0) + break; + if (ibuf != 0x08) + deb_info("i2c write could have been failed\n"); + } + } + + up(&d->i2c_sem); + return i; +} + +static u32 cxusb_i2c_func(struct i2c_adapter *adapter) +{ + return I2C_FUNC_I2C; +} + +static struct i2c_algorithm cxusb_i2c_algo = { + .name = "Conexant USB I2C algorithm", + .id = I2C_ALGO_BIT, + .master_xfer = cxusb_i2c_xfer, + .functionality = cxusb_i2c_func, +}; + +static int cxusb_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + return 0; +} + +static int cxusb_streaming_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 buf[2] = { 0x03, 0x00 }; + if (onoff) + cxusb_ctrl_msg(d,0x36, buf, 2, NULL, 0); + else + cxusb_ctrl_msg(d,0x37, NULL, 0, NULL, 0); + + return 0; +} + +struct cx22702_config cxusb_cx22702_config = { + .demod_address = 0x63, + + .output_mode = CX22702_PARALLEL_OUTPUT, + + .pll_init = dvb_usb_pll_init_i2c, + .pll_set = dvb_usb_pll_set_i2c, +}; + +/* Callbacks for DVB USB */ +static int cxusb_tuner_attach(struct dvb_usb_device *d) +{ + u8 bpll[4] = { 0x0b, 0xdc, 0x9c, 0xa0 }; + d->pll_addr = 0x61; + memcpy(d->pll_init,bpll,4); + d->pll_desc = &dvb_pll_fmd1216me; + return 0; +} + +static int cxusb_frontend_attach(struct dvb_usb_device *d) +{ + u8 buf[2] = { 0x03, 0x00 }; + u8 b = 0; + + if (usb_set_interface(d->udev,0,0) < 0) + err("set interface to alts=0 failed"); + + cxusb_ctrl_msg(d,0xde,&b,0,NULL,0); + cxusb_set_i2c_path(d,PATH_TUNER_OTHER); + cxusb_ctrl_msg(d,CMD_POWER_OFF, NULL, 0, &b, 1); + + if (usb_set_interface(d->udev,0,6) < 0) + err("set interface failed"); + + cxusb_ctrl_msg(d,0x36, buf, 2, NULL, 0); + cxusb_set_i2c_path(d,PATH_CX22702); + cxusb_ctrl_msg(d,CMD_POWER_ON, NULL, 0, &b, 1); + + if ((d->fe = cx22702_attach(&cxusb_cx22702_config, &d->i2c_adap)) != NULL) + return 0; + + return -EIO; +} + +/* DVB USB Driver stuff */ +static struct dvb_usb_properties cxusb_properties; + +static int cxusb_probe(struct usb_interface *intf, + const struct usb_device_id *id) +{ + return dvb_usb_device_init(intf,&cxusb_properties,THIS_MODULE); +} + +static struct usb_device_id cxusb_table [] = { + { USB_DEVICE(USB_VID_MEDION, USB_PID_MEDION_MD95700) }, + {} /* Terminating entry */ +}; +MODULE_DEVICE_TABLE (usb, cxusb_table); + +static struct dvb_usb_properties cxusb_properties = { + .caps = DVB_USB_IS_AN_I2C_ADAPTER, + + .usb_ctrl = CYPRESS_FX2, + + .size_of_priv = sizeof(struct cxusb_state), + + .streaming_ctrl = cxusb_streaming_ctrl, + .power_ctrl = cxusb_power_ctrl, + .frontend_attach = cxusb_frontend_attach, + .tuner_attach = cxusb_tuner_attach, + + .i2c_algo = &cxusb_i2c_algo, + + .generic_bulk_ctrl_endpoint = 0x01, + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_ISOC, + .count = 5, + .endpoint = 0x02, + .u = { + .isoc = { + .framesperurb = 32, + .framesize = 940, + .interval = 5, + } + } + }, + + .num_device_descs = 1, + .devices = { + { "Medion MD95700 (MDUSBTV-HYBRID)", + { NULL }, + { &cxusb_table[0], NULL }, + }, + } +}; + +static struct usb_driver cxusb_driver = { + .owner = THIS_MODULE, + .name = "dvb_usb_cxusb", + .probe = cxusb_probe, + .disconnect = dvb_usb_device_exit, + .id_table = cxusb_table, +}; + +/* module stuff */ +static int __init cxusb_module_init(void) +{ + int result; + if ((result = usb_register(&cxusb_driver))) { + err("usb_register failed. Error number %d",result); + return result; + } + + return 0; +} + +static void __exit cxusb_module_exit(void) +{ + /* deregister this driver from the USB subsystem */ + usb_deregister(&cxusb_driver); +} + +module_init (cxusb_module_init); +module_exit (cxusb_module_exit); + +MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); +MODULE_DESCRIPTION("Driver for Conexant USB2.0 hybrid reference design"); +MODULE_VERSION("1.0-alpha"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/cxusb.h b/drivers/media/dvb/dvb-usb/cxusb.h new file mode 100644 index 000000000000..1d79016e3195 --- /dev/null +++ b/drivers/media/dvb/dvb-usb/cxusb.h @@ -0,0 +1,30 @@ +#ifndef _DVB_USB_CXUSB_H_ +#define _DVB_USB_CXUSB_H_ + +#define DVB_USB_LOG_PREFIX "digitv" +#include "dvb-usb.h" + +extern int dvb_usb_cxusb_debug; +#define deb_info(args...) dprintk(dvb_usb_cxusb_debug,0x01,args) + +/* usb commands - some of it are guesses, don't have a reference yet */ +#define CMD_I2C_WRITE 0x08 +#define CMD_I2C_READ 0x09 + +#define CMD_IOCTL 0x0e +#define IOCTL_SET_I2C_PATH 0x02 + +#define CMD_POWER_OFF 0x50 +#define CMD_POWER_ON 0x51 + +enum cxusb_i2c_pathes { + PATH_UNDEF = 0x00, + PATH_CX22702 = 0x01, + PATH_TUNER_OTHER = 0x02, +}; + +struct cxusb_state { + enum cxusb_i2c_pathes cur_i2c_path; +}; + +#endif diff --git a/drivers/media/dvb/dvb-usb/dibusb-mb.c b/drivers/media/dvb/dvb-usb/dibusb-mb.c index a0ffbb59fa14..828b5182e16c 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mb.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mb.c @@ -31,10 +31,17 @@ static int dibusb_dib3000mb_frontend_attach(struct dvb_usb_device *d) return 0; } -/* some of the dibusb 1.1 device aren't equipped with the default tuner +static int dibusb_thomson_tuner_attach(struct dvb_usb_device *d) +{ + d->pll_addr = 0x61; + d->pll_desc = &dvb_pll_tua6010xs; + return 0; +} + +/* Some of the Artec 1.1 device aren't equipped with the default tuner * (Thomson Cable), but with a Panasonic ENV77H11D5. This function figures * this out. */ -static int dibusb_dib3000mb_tuner_attach (struct dvb_usb_device *d) +static int dibusb_tuner_probe_and_attach(struct dvb_usb_device *d) { u8 b[2] = { 0,0 }, b2[1]; int ret = 0; @@ -59,8 +66,7 @@ static int dibusb_dib3000mb_tuner_attach (struct dvb_usb_device *d) if (b2[0] == 0xfe) { info("this device has the Thomson Cable onboard. Which is default."); - d->pll_addr = 0x61; - d->pll_desc = &dvb_pll_tua6010xs; + dibusb_thomson_tuner_attach(d); } else { u8 bpll[4] = { 0x0b, 0xf5, 0x85, 0xab }; info("this device has the Panasonic ENV77H11D5 onboard."); @@ -90,8 +96,8 @@ static int dibusb_probe(struct usb_interface *intf, /* do not change the order of the ID table */ static struct usb_device_id dibusb_dib3000mb_table [] = { -/* 00 */ { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_AVERMEDIA_DVBT_USB_COLD)}, -/* 01 */ { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_AVERMEDIA_DVBT_USB_WARM)}, +/* 00 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_COLD)}, +/* 01 */ { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_AVERMEDIA_DVBT_USB_WARM)}, /* 02 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_COLD) }, /* 03 */ { USB_DEVICE(USB_VID_COMPRO, USB_PID_COMPRO_DVBU2000_WARM) }, /* 04 */ { USB_DEVICE(USB_VID_COMPRO_UNK, USB_PID_COMPRO_DVBU2000_UNK_COLD) }, @@ -114,7 +120,17 @@ static struct usb_device_id dibusb_dib3000mb_table [] = { /* 21 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_COLD) }, /* 22 */ { USB_DEVICE(USB_VID_ULTIMA_ELECTRONIC, USB_PID_ULTIMA_TVBOX_AN2235_WARM) }, /* 23 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_COLD) }, + +/* device ID with default DIBUSB2_0-firmware and with the hacked firmware */ /* 24 */ { USB_DEVICE(USB_VID_ADSTECH, USB_PID_ADSTECH_USB2_WARM) }, +/* 25 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_COLD) }, +/* 26 */ { USB_DEVICE(USB_VID_KYE, USB_PID_KYE_DVB_T_WARM) }, + +// #define DVB_USB_DIBUSB_MB_FAULTY_USB_IDs + +#ifdef DVB_USB_DIBUSB_MB_FAULTY_USB_IDs +/* 27 */ { USB_DEVICE(USB_VID_ANCHOR, USB_PID_ULTIMA_TVBOX_ANCHOR_COLD) }, +#endif { } /* Terminating entry */ }; MODULE_DEVICE_TABLE (usb, dibusb_dib3000mb_table); @@ -134,7 +150,7 @@ static struct dvb_usb_properties dibusb1_1_properties = { .pid_filter_ctrl = dibusb_pid_filter_ctrl, .power_ctrl = dibusb_power_ctrl, .frontend_attach = dibusb_dib3000mb_frontend_attach, - .tuner_attach = dibusb_dib3000mb_tuner_attach, + .tuner_attach = dibusb_tuner_probe_and_attach, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dibusb_rc_keys, @@ -156,7 +172,7 @@ static struct dvb_usb_properties dibusb1_1_properties = { } }, - .num_device_descs = 8, + .num_device_descs = 9, .devices = { { "AVerMedia AverTV DVBT USB1.1", { &dibusb_dib3000mb_table[0], NULL }, @@ -190,11 +206,17 @@ static struct dvb_usb_properties dibusb1_1_properties = { { &dibusb_dib3000mb_table[19], NULL }, { &dibusb_dib3000mb_table[20], NULL }, }, + { "VideoWalker DVB-T USB", + { &dibusb_dib3000mb_table[25], NULL }, + { &dibusb_dib3000mb_table[26], NULL }, + }, } }; static struct dvb_usb_properties dibusb1_1_an2235_properties = { .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 16, + .usb_ctrl = CYPRESS_AN2235, .firmware = "dvb-usb-dibusb-an2235-01.fw", @@ -206,7 +228,7 @@ static struct dvb_usb_properties dibusb1_1_an2235_properties = { .pid_filter_ctrl = dibusb_pid_filter_ctrl, .power_ctrl = dibusb_power_ctrl, .frontend_attach = dibusb_dib3000mb_frontend_attach, - .tuner_attach = dibusb_dib3000mb_tuner_attach, + .tuner_attach = dibusb_tuner_probe_and_attach, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dibusb_rc_keys, @@ -228,20 +250,32 @@ static struct dvb_usb_properties dibusb1_1_an2235_properties = { } }, +#ifdef DVB_USB_DIBUSB_MB_FAULTY_USB_IDs + .num_device_descs = 2, +#else .num_device_descs = 1, +#endif .devices = { { "Artec T1 USB1.1 TVBOX with AN2235", { &dibusb_dib3000mb_table[20], NULL }, { &dibusb_dib3000mb_table[21], NULL }, }, +#ifdef DVB_USB_DIBUSB_MB_FAULTY_USB_IDs + { "Artec T1 USB1.1 TVBOX with AN2235 (faulty USB IDs)", + { &dibusb_dib3000mb_table[27], NULL }, + { NULL }, + }, +#endif } }; static struct dvb_usb_properties dibusb2_0b_properties = { .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_PID_FILTER_CAN_BE_TURNED_OFF | DVB_USB_IS_AN_I2C_ADAPTER, + .pid_filter_count = 32, + .usb_ctrl = CYPRESS_FX2, - .firmware = "dvb-usb-adstech-usb2-01.fw", + .firmware = "dvb-usb-adstech-usb2-02.fw", .size_of_priv = sizeof(struct dibusb_state), @@ -250,7 +284,7 @@ static struct dvb_usb_properties dibusb2_0b_properties = { .pid_filter_ctrl = dibusb_pid_filter_ctrl, .power_ctrl = dibusb2_0_power_ctrl, .frontend_attach = dibusb_dib3000mb_frontend_attach, - .tuner_attach = dibusb_dib3000mb_tuner_attach, + .tuner_attach = dibusb_thomson_tuner_attach, .rc_interval = DEFAULT_RC_INTERVAL, .rc_key_map = dibusb_rc_keys, @@ -272,18 +306,18 @@ static struct dvb_usb_properties dibusb2_0b_properties = { } }, - .num_device_descs = 2, + .num_device_descs = 1, .devices = { { "KWorld/ADSTech Instant DVB-T USB 2.0", { &dibusb_dib3000mb_table[23], NULL }, - { &dibusb_dib3000mb_table[24], NULL }, /* device ID with default DIBUSB2_0-firmware */ + { &dibusb_dib3000mb_table[24], NULL }, }, } }; static struct usb_driver dibusb_driver = { .owner = THIS_MODULE, - .name = "DiBcom based USB DVB-T devices (DiB3000M-B based)", + .name = "dvb_usb_dibusb_mb", .probe = dibusb_probe, .disconnect = dvb_usb_device_exit, .id_table = dibusb_dib3000mb_table, diff --git a/drivers/media/dvb/dvb-usb/dibusb-mc.c b/drivers/media/dvb/dvb-usb/dibusb-mc.c index aad8ed3fe005..e9dac430f37d 100644 --- a/drivers/media/dvb/dvb-usb/dibusb-mc.c +++ b/drivers/media/dvb/dvb-usb/dibusb-mc.c @@ -83,7 +83,7 @@ static struct dvb_usb_properties dibusb_mc_properties = { static struct usb_driver dibusb_mc_driver = { .owner = THIS_MODULE, - .name = "DiBcom based USB2.0 DVB-T (DiB3000M-C/P based) devices", + .name = "dvb_usb_dibusb_mc", .probe = dibusb_mc_probe, .disconnect = dvb_usb_device_exit, .id_table = dibusb_dib3000mc_table, diff --git a/drivers/media/dvb/dvb-usb/digitv.c b/drivers/media/dvb/dvb-usb/digitv.c index 5acf3fde9522..9a676afc1d6e 100644 --- a/drivers/media/dvb/dvb-usb/digitv.c +++ b/drivers/media/dvb/dvb-usb/digitv.c @@ -1,10 +1,9 @@ /* DVB USB compliant linux driver for Nebula Electronics uDigiTV DVB-T USB2.0 * receiver * - * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) and - * Allan Third (allan.third@cs.man.ac.uk) + * Copyright (C) 2005 Patrick Boettcher (patrick.boettcher@desy.de) * - * partly based on the SDK published by Nebula Electronics (TODO do we want this line ?) + * partly based on the SDK published by Nebula Electronics * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free @@ -38,7 +37,7 @@ static int digitv_ctrl_msg(struct dvb_usb_device *d, dvb_usb_generic_write(d,sndbuf,7); } else { dvb_usb_generic_rw(d,sndbuf,7,rcvbuf,7,10); - memcpy(&rbuf,&rcvbuf[3],rlen); + memcpy(rbuf,&rcvbuf[3],rlen); } return 0; } @@ -95,41 +94,20 @@ static int digitv_identify_state (struct usb_device *udev, struct static int digitv_mt352_demod_init(struct dvb_frontend *fe) { - static u8 mt352_clock_config[] = { 0x89, 0x38, 0x2d }; - static u8 mt352_reset[] = { 0x50, 0x80 }; - static u8 mt352_mclk_ratio[] = { 0x8b, 0x00 }; - - static u8 mt352_agc_cfg[] = { 0x68, 0xa0 }; - static u8 mt352_adc_ctl_1_cfg[] = { 0x8E, 0xa0 }; - static u8 mt352_acq_ctl[] = { 0x53, 0x50 }; - static u8 mt352_agc_target[] = { 0x67, 0x20 }; - - static u8 mt352_rs_err_per[] = { 0x7c, 0x00, 0x01 }; - static u8 mt352_snr_select[] = { 0x79, 0x00, 0x20 }; - - static u8 mt352_input_freq_1[] = { 0x56, 0x31, 0x05 }; + static u8 reset_buf[] = { 0x89, 0x38, 0x8a, 0x2d, 0x50, 0x80 }; + static u8 init_buf[] = { 0x68, 0xa0, 0x8e, 0x40, 0x53, 0x50, + 0x67, 0x20, 0x7d, 0x01, 0x7c, 0x00, 0x7a, 0x00, + 0x79, 0x20, 0x57, 0x05, 0x56, 0x31, 0x88, 0x0f, + 0x75, 0x32 }; + int i; - static u8 mt352_scan_ctl[] = { 0x88, 0x0f }; - static u8 mt352_capt_range[] = { 0x75, 0x32 }; + for (i = 0; i < ARRAY_SIZE(reset_buf); i += 2) + mt352_write(fe, &reset_buf[i], 2); - mt352_write(fe, mt352_clock_config, sizeof(mt352_clock_config)); - mt352_write(fe, mt352_reset, sizeof(mt352_reset)); msleep(1); - mt352_write(fe, mt352_mclk_ratio, sizeof(mt352_mclk_ratio)); - - mt352_write(fe, mt352_agc_cfg, sizeof(mt352_agc_cfg)); - mt352_write(fe, mt352_adc_ctl_1_cfg, sizeof(mt352_adc_ctl_1_cfg)); - mt352_write(fe, mt352_acq_ctl, sizeof(mt352_acq_ctl)); - mt352_write(fe, mt352_agc_target, sizeof(mt352_agc_target)); - - - mt352_write(fe, mt352_rs_err_per, sizeof(mt352_rs_err_per)); - mt352_write(fe, mt352_snr_select, sizeof(mt352_snr_select)); - mt352_write(fe, mt352_input_freq_1, sizeof(mt352_input_freq_1)); - - mt352_write(fe, mt352_scan_ctl, sizeof(mt352_scan_ctl)); - mt352_write(fe, mt352_capt_range, sizeof(mt352_capt_range)); + for (i = 0; i < ARRAY_SIZE(init_buf); i += 2) + mt352_write(fe, &init_buf[i], 2); return 0; } @@ -137,7 +115,7 @@ static int digitv_mt352_demod_init(struct dvb_frontend *fe) static struct mt352_config digitv_mt352_config = { .demod_address = 0x0, /* ignored by the digitv anyway */ .demod_init = digitv_mt352_demod_init, - .pll_set = NULL, /* TODO */ + .pll_set = dvb_usb_pll_set, }; static struct nxt6000_config digitv_nxt6000_config = { @@ -150,9 +128,9 @@ static struct nxt6000_config digitv_nxt6000_config = { static int digitv_frontend_attach(struct dvb_usb_device *d) { - if ((d->fe = mt352_attach(&digitv_mt352_config, &d->i2c_adap)) == NULL) + if ((d->fe = mt352_attach(&digitv_mt352_config, &d->i2c_adap)) != NULL) return 0; - if ((d->fe = nxt6000_attach(&digitv_nxt6000_config, &d->i2c_adap)) == NULL) { + if ((d->fe = nxt6000_attach(&digitv_nxt6000_config, &d->i2c_adap)) != NULL) { warn("nxt6000 support is not done yet, in fact you are one of the first " "person who wants to use this device in Linux. Please report to " @@ -163,6 +141,13 @@ static int digitv_frontend_attach(struct dvb_usb_device *d) return -EIO; } +static int digitv_tuner_attach(struct dvb_usb_device *d) +{ + d->pll_addr = 0x60; + d->pll_desc = &dvb_pll_tded4; + return 0; +} + static struct dvb_usb_rc_key digitv_rc_keys[] = { { 0x00, 0x16, KEY_POWER }, /* dummy key */ }; @@ -184,7 +169,6 @@ int digitv_rc_query(struct dvb_usb_device *d, u32 *event, int *state) return 0; } - /* DVB USB Driver stuff */ static struct dvb_usb_properties digitv_properties; @@ -208,13 +192,8 @@ static struct dvb_usb_properties digitv_properties = { .size_of_priv = 0, - .streaming_ctrl = NULL, - .pid_filter = NULL, - .pid_filter_ctrl = NULL, - .power_ctrl = NULL, .frontend_attach = digitv_frontend_attach, - .tuner_attach = NULL, // digitv_tuner_attach, - .read_mac_address = NULL, + .tuner_attach = digitv_tuner_attach, .rc_interval = 1000, .rc_key_map = digitv_rc_keys, @@ -238,7 +217,7 @@ static struct dvb_usb_properties digitv_properties = { } }, - .num_device_descs = 2, + .num_device_descs = 1, .devices = { { "Nebula Electronics uDigiTV DVB-T USB2.0)", { &digitv_table[0], NULL }, @@ -249,7 +228,7 @@ static struct dvb_usb_properties digitv_properties = { static struct usb_driver digitv_driver = { .owner = THIS_MODULE, - .name = "Nebula Electronics uDigiTV DVB-T USB2.0 device", + .name = "dvb_usb_digitv", .probe = digitv_probe, .disconnect = dvb_usb_device_exit, .id_table = digitv_table, diff --git a/drivers/media/dvb/dvb-usb/dtt200u-fe.c b/drivers/media/dvb/dvb-usb/dtt200u-fe.c index d17d768038c6..b032523b07bc 100644 --- a/drivers/media/dvb/dvb-usb/dtt200u-fe.c +++ b/drivers/media/dvb/dvb-usb/dtt200u-fe.c @@ -1,5 +1,5 @@ -/* Frontend part of the Linux driver for the Yakumo/Hama/Typhoon DVB-T - * USB2.0 receiver. +/* Frontend part of the Linux driver for the WideView/ Yakumo/ Hama/ + * Typhoon/ Yuan DVB-T USB2.0 receiver. * * Copyright (C) 2005 Patrick Boettcher <patrick.boettcher@desy.de> * @@ -14,61 +14,58 @@ struct dtt200u_fe_state { struct dvb_usb_device *d; + fe_status_t stat; + struct dvb_frontend_parameters fep; struct dvb_frontend frontend; }; -#define moan(which,what) info("unexpected value in '%s' for cmd '%02x' - please report to linux-dvb@linuxtv.org",which,what) - static int dtt200u_fe_read_status(struct dvb_frontend* fe, fe_status_t *stat) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_TUNE_STAT; - u8 br[3] = { 0 }; -// u8 bdeb[5] = { 0 }; + u8 st = GET_TUNE_STATUS, b[3]; + + dvb_usb_generic_rw(state->d,&st,1,b,3,0); - dvb_usb_generic_rw(state->d,&bw,1,br,3,0); - switch (br[0]) { + switch (b[0]) { case 0x01: - *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; + *stat = FE_HAS_SIGNAL | FE_HAS_CARRIER | + FE_HAS_VITERBI | FE_HAS_SYNC | FE_HAS_LOCK; break; - case 0x00: - *stat = 0; + case 0x00: /* pending */ + *stat = FE_TIMEDOUT; /* during set_frontend */ break; default: - moan("br[0]",GET_TUNE_STAT); + case 0x02: /* failed */ + *stat = 0; break; } - -// bw[0] = 0x88; -// dvb_usb_generic_rw(state->d,bw,1,bdeb,5,0); - -// deb_info("%02x: %02x %02x %02x %02x %02x\n",bw[0],bdeb[0],bdeb[1],bdeb[2],bdeb[3],bdeb[4]); - return 0; } + static int dtt200u_fe_read_ber(struct dvb_frontend* fe, u32 *ber) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_BER; - *ber = 0; - dvb_usb_generic_rw(state->d,&bw,1,(u8*) ber,3,0); + u8 bw = GET_VIT_ERR_CNT,b[3]; + dvb_usb_generic_rw(state->d,&bw,1,b,3,0); + *ber = (b[0] << 16) | (b[1] << 8) | b[2]; return 0; } static int dtt200u_fe_read_unc_blocks(struct dvb_frontend* fe, u32 *unc) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_UNK; - *unc = 0; - dvb_usb_generic_rw(state->d,&bw,1,(u8*) unc,3,0); + u8 bw = GET_RS_UNCOR_BLK_CNT,b[2]; + + dvb_usb_generic_rw(state->d,&bw,1,b,2,0); + *unc = (b[0] << 8) | b[1]; return 0; } static int dtt200u_fe_read_signal_strength(struct dvb_frontend* fe, u16 *strength) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 bw = GET_SIG_STRENGTH, b; + u8 bw = GET_AGC, b; dvb_usb_generic_rw(state->d,&bw,1,&b,1,0); *strength = (b << 8) | b; return 0; @@ -86,7 +83,7 @@ static int dtt200u_fe_read_snr(struct dvb_frontend* fe, u16 *snr) static int dtt200u_fe_init(struct dvb_frontend* fe) { struct dtt200u_fe_state *state = fe->demodulator_priv; - u8 b = RESET_DEMOD; + u8 b = SET_INIT; return dvb_usb_generic_write(state->d,&b,1); } @@ -98,8 +95,8 @@ static int dtt200u_fe_sleep(struct dvb_frontend* fe) static int dtt200u_fe_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) { tune->min_delay_ms = 1500; - tune->step_size = 166667; - tune->max_drift = 166667 * 2; + tune->step_size = 0; + tune->max_drift = 0; return 0; } @@ -107,27 +104,32 @@ static int dtt200u_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *fep) { struct dtt200u_fe_state *state = fe->demodulator_priv; + int i; + fe_status_t st; u16 freq = fep->frequency / 250000; - u8 bw,bwbuf[2] = { SET_BANDWIDTH, 0 }, freqbuf[3] = { SET_FREQUENCY, 0, 0 }; + u8 bwbuf[2] = { SET_BANDWIDTH, 0 },freqbuf[3] = { SET_RF_FREQ, 0, 0 }; switch (fep->u.ofdm.bandwidth) { - case BANDWIDTH_8_MHZ: bw = 8; break; - case BANDWIDTH_7_MHZ: bw = 7; break; - case BANDWIDTH_6_MHZ: bw = 6; break; + case BANDWIDTH_8_MHZ: bwbuf[1] = 8; break; + case BANDWIDTH_7_MHZ: bwbuf[1] = 7; break; + case BANDWIDTH_6_MHZ: bwbuf[1] = 6; break; case BANDWIDTH_AUTO: return -EOPNOTSUPP; default: return -EINVAL; } - deb_info("set_frontend\n"); - bwbuf[1] = bw; dvb_usb_generic_write(state->d,bwbuf,2); freqbuf[1] = freq & 0xff; freqbuf[2] = (freq >> 8) & 0xff; dvb_usb_generic_write(state->d,freqbuf,3); - memcpy(&state->fep,fep,sizeof(struct dvb_frontend_parameters)); + for (i = 0; i < 30; i++) { + msleep(20); + dtt200u_fe_read_status(fe, &st); + if (st & FE_TIMEDOUT) + continue; + } return 0; } @@ -174,7 +176,7 @@ success: static struct dvb_frontend_ops dtt200u_fe_ops = { .info = { - .name = "DTT200U (Yakumo/Typhoon/Hama) DVB-T", + .name = "WideView USB DVB-T", .type = FE_OFDM, .frequency_min = 44250000, .frequency_max = 867250000, diff --git a/drivers/media/dvb/dvb-usb/dtt200u.c b/drivers/media/dvb/dvb-usb/dtt200u.c index fb2b5a2da137..47dba6e45968 100644 --- a/drivers/media/dvb/dvb-usb/dtt200u.c +++ b/drivers/media/dvb/dvb-usb/dtt200u.c @@ -1,8 +1,10 @@ -/* DVB USB library compliant Linux driver for the Yakumo/Hama/Typhoon DVB-T - * USB2.0 receiver. +/* DVB USB library compliant Linux driver for the WideView/ Yakumo/ Hama/ + * Typhoon/ Yuan DVB-T USB2.0 receiver. * * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) * + * Thanks to Steve Chang from WideView for providing support for the WT-220U. + * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the Free * Software Foundation, version 2. @@ -16,14 +18,24 @@ int dvb_usb_dtt200u_debug; module_param_named(debug,dvb_usb_dtt200u_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2 (or-able))." DVB_USB_DEBUG_STATUS); +static int dtt200u_power_ctrl(struct dvb_usb_device *d, int onoff) +{ + u8 b = SET_INIT; + + if (onoff) + dvb_usb_generic_write(d,&b,2); + + return 0; +} + static int dtt200u_streaming_ctrl(struct dvb_usb_device *d, int onoff) { - u8 b_streaming[2] = { SET_TS_CTRL, onoff }; + u8 b_streaming[2] = { SET_STREAMING, onoff }; u8 b_rst_pid = RESET_PID_FILTER; dvb_usb_generic_write(d,b_streaming,2); - if (!onoff) + if (onoff == 0) dvb_usb_generic_write(d,&b_rst_pid,1); return 0; } @@ -36,7 +48,7 @@ static int dtt200u_pid_filter(struct dvb_usb_device *d, int index, u16 pid, int b_pid[0] = SET_PID_FILTER; b_pid[1] = index; b_pid[2] = pid & 0xff; - b_pid[3] = (pid >> 8) & 0xff; + b_pid[3] = (pid >> 8) & 0x1f; return dvb_usb_generic_write(d,b_pid,4); } @@ -54,9 +66,9 @@ static struct dvb_usb_rc_key dtt200u_rc_keys[] = { { 0x80, 0x08, KEY_5 }, { 0x80, 0x09, KEY_6 }, { 0x80, 0x0a, KEY_7 }, - { 0x00, 0x0c, KEY_ZOOM }, + { 0x80, 0x0c, KEY_ZOOM }, { 0x80, 0x0d, KEY_0 }, - { 0x00, 0x0e, KEY_SELECT }, + { 0x80, 0x0e, KEY_SELECT }, { 0x80, 0x12, KEY_POWER }, { 0x80, 0x1a, KEY_CHANNELUP }, { 0x80, 0x1b, KEY_8 }, @@ -66,7 +78,7 @@ static struct dvb_usb_rc_key dtt200u_rc_keys[] = { static int dtt200u_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { - u8 key[5],cmd = GET_RC_KEY; + u8 key[5],cmd = GET_RC_CODE; dvb_usb_generic_rw(d,&cmd,1,key,5,0); dvb_usb_nec_rc_key_to_event(d,key,event,state); if (key[0] != 0) @@ -81,32 +93,41 @@ static int dtt200u_frontend_attach(struct dvb_usb_device *d) } static struct dvb_usb_properties dtt200u_properties; +static struct dvb_usb_properties wt220u_properties; static int dtt200u_usb_probe(struct usb_interface *intf, const struct usb_device_id *id) { - return dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE); + if (dvb_usb_device_init(intf,&dtt200u_properties,THIS_MODULE) == 0 || + dvb_usb_device_init(intf,&wt220u_properties,THIS_MODULE) == 0) + return 0; + + return -ENODEV; } static struct usb_device_id dtt200u_usb_table [] = { - { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_DTT200U_COLD) }, - { USB_DEVICE(USB_VID_AVERMEDIA_UNK, USB_PID_DTT200U_WARM) }, +// { USB_DEVICE(0x04b4,0x8613) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_COLD) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_DTT200U_WARM) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_COLD) }, + { USB_DEVICE(USB_VID_WIDEVIEW, USB_PID_WT220U_WARM) }, { 0 }, }; MODULE_DEVICE_TABLE(usb, dtt200u_usb_table); static struct dvb_usb_properties dtt200u_properties = { .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING, - .pid_filter_count = 255, /* It is a guess, but there are at least 10 */ + .pid_filter_count = 15, .usb_ctrl = CYPRESS_FX2, .firmware = "dvb-usb-dtt200u-01.fw", + .power_ctrl = dtt200u_power_ctrl, .streaming_ctrl = dtt200u_streaming_ctrl, .pid_filter = dtt200u_pid_filter, .frontend_attach = dtt200u_frontend_attach, - .rc_interval = 200, + .rc_interval = 300, .rc_key_map = dtt200u_rc_keys, .rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys), .rc_query = dtt200u_rc_query, @@ -127,18 +148,59 @@ static struct dvb_usb_properties dtt200u_properties = { .num_device_descs = 1, .devices = { - { .name = "Yakumo/Hama/Typhoon DVB-T USB2.0)", - .cold_ids = { &dtt200u_usb_table[0], &dtt200u_usb_table[2] }, + { .name = "WideView/Yuan/Yakumo/Hama/Typhoon DVB-T USB2.0 (WT-200U)", + .cold_ids = { &dtt200u_usb_table[0], NULL }, .warm_ids = { &dtt200u_usb_table[1], NULL }, }, { 0 }, } }; +static struct dvb_usb_properties wt220u_properties = { + .caps = DVB_USB_HAS_PID_FILTER | DVB_USB_NEED_PID_FILTERING, + .pid_filter_count = 15, + + .usb_ctrl = CYPRESS_FX2, + .firmware = "dvb-usb-wt220u-01.fw", + + .power_ctrl = dtt200u_power_ctrl, + .streaming_ctrl = dtt200u_streaming_ctrl, + .pid_filter = dtt200u_pid_filter, + .frontend_attach = dtt200u_frontend_attach, + + .rc_interval = 300, + .rc_key_map = dtt200u_rc_keys, + .rc_key_map_size = ARRAY_SIZE(dtt200u_rc_keys), + .rc_query = dtt200u_rc_query, + + .generic_bulk_ctrl_endpoint = 0x01, + + /* parameter for the MPEG2-data transfer */ + .urb = { + .type = DVB_USB_BULK, + .count = 7, + .endpoint = 0x02, + .u = { + .bulk = { + .buffersize = 4096, + } + } + }, + + .num_device_descs = 1, + .devices = { + { .name = "WideView WT-220U PenType Receiver (and clones)", + .cold_ids = { &dtt200u_usb_table[2], NULL }, + .warm_ids = { &dtt200u_usb_table[3], NULL }, + }, + { 0 }, + } +}; + /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver dtt200u_usb_driver = { .owner = THIS_MODULE, - .name = "Yakumo/Hama/Typhoon DVB-T USB2.0", + .name = "dvb_usb_dtt200u", .probe = dtt200u_usb_probe, .disconnect = dvb_usb_device_exit, .id_table = dtt200u_usb_table, @@ -166,6 +228,6 @@ module_init(dtt200u_usb_module_init); module_exit(dtt200u_usb_module_exit); MODULE_AUTHOR("Patrick Boettcher <patrick.boettcher@desy.de>"); -MODULE_DESCRIPTION("Driver for the Yakumo/Hama/Typhoon DVB-T USB2.0 device"); +MODULE_DESCRIPTION("Driver for the WideView/Yakumo/Hama/Typhoon DVB-T USB2.0 devices"); MODULE_VERSION("1.0"); MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/dvb-usb/dtt200u.h b/drivers/media/dvb/dvb-usb/dtt200u.h index ed4142071518..6f1f3042e21a 100644 --- a/drivers/media/dvb/dvb-usb/dtt200u.h +++ b/drivers/media/dvb/dvb-usb/dtt200u.h @@ -1,5 +1,5 @@ -/* Common header file of Linux driver for the Yakumo/Hama/Typhoon DVB-T - * USB2.0 receiver. +/* Common header file of Linux driver for the WideView/ Yakumo/ Hama/ + * Typhoon/ Yuan DVB-T USB2.0 receiver. * * Copyright (C) 2004-5 Patrick Boettcher (patrick.boettcher@desy.de) * @@ -22,44 +22,34 @@ extern int dvb_usb_dtt200u_debug; /* guessed protocol description (reverse engineered): * read * 00 - USB type 0x02 for usb2.0, 0x01 for usb1.1 - * 81 - <TS_LOCK> <current frequency divided by 250000> - * 82 - crash - do not touch - * 83 - crash - do not touch - * 84 - remote control - * 85 - crash - do not touch (OK, stop testing here) * 88 - locking 2 bytes (0x80 0x40 == no signal, 0x89 0x20 == nice signal) - * 89 - noise-to-signal - * 8a - unkown 1 byte - signal_strength - * 8c - ber ??? - * 8d - ber - * 8e - unc */ -#define GET_SPEED 0x00 -#define GET_TUNE_STAT 0x81 -#define GET_RC_KEY 0x84 -#define GET_STATUS 0x88 -#define GET_SNR 0x89 -#define GET_SIG_STRENGTH 0x8a -#define GET_UNK 0x8c -#define GET_BER 0x8d -#define GET_UNC 0x8e +#define GET_SPEED 0x00 +#define GET_TUNE_STATUS 0x81 +#define GET_RC_CODE 0x84 +#define GET_CONFIGURATION 0x88 +#define GET_AGC 0x89 +#define GET_SNR 0x8a +#define GET_VIT_ERR_CNT 0x8c +#define GET_RS_ERR_CNT 0x8d +#define GET_RS_UNCOR_BLK_CNT 0x8e /* write - * 01 - reset the demod + * 01 - init * 02 - frequency (divided by 250000) * 03 - bandwidth * 04 - pid table (index pid(7:0) pid(12:8)) * 05 - reset the pid table - * 08 - demod transfer enabled or not (FX2 transfer is enabled by default) + * 08 - transfer switch */ -#define RESET_DEMOD 0x01 -#define SET_FREQUENCY 0x02 +#define SET_INIT 0x01 +#define SET_RF_FREQ 0x02 #define SET_BANDWIDTH 0x03 #define SET_PID_FILTER 0x04 #define RESET_PID_FILTER 0x05 -#define SET_TS_CTRL 0x08 +#define SET_STREAMING 0x08 extern struct dvb_frontend * dtt200u_fe_attach(struct dvb_usb_device *d); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-common.h b/drivers/media/dvb/dvb-usb/dvb-usb-common.h index 67e0d73fbceb..7300489d3e24 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-common.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-common.h @@ -12,14 +12,16 @@ #include "dvb-usb.h" extern int dvb_usb_debug; +extern int dvb_usb_disable_rc_polling; #define deb_info(args...) dprintk(dvb_usb_debug,0x01,args) #define deb_xfer(args...) dprintk(dvb_usb_debug,0x02,args) -#define deb_pll(args...) dprintk(dvb_usb_debug,0x04,args) +#define deb_pll(args...) dprintk(dvb_usb_debug,0x04,args) #define deb_ts(args...) dprintk(dvb_usb_debug,0x08,args) #define deb_err(args...) dprintk(dvb_usb_debug,0x10,args) #define deb_rc(args...) dprintk(dvb_usb_debug,0x20,args) #define deb_fw(args...) dprintk(dvb_usb_debug,0x40,args) +#define deb_mem(args...) dprintk(dvb_usb_debug,0x80,args) /* commonly used methods */ extern int usb_cypress_load_firmware(struct usb_device *, const char *, int); diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c index bdd72f779707..3491ff40885c 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-dvb.c @@ -175,7 +175,7 @@ static int dvb_usb_fe_sleep(struct dvb_frontend *fe) int dvb_usb_fe_init(struct dvb_usb_device* d) { if (d->props.frontend_attach == NULL) { - err("strange '%s' don't want to attach a frontend.",d->desc->name); + err("strange '%s' doesn't want to attach a frontend.",d->desc->name); return 0; } diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h index bcb34191868b..794d513a8480 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h @@ -12,7 +12,7 @@ /* Vendor IDs */ #define USB_VID_ADSTECH 0x06e1 #define USB_VID_ANCHOR 0x0547 -#define USB_VID_AVERMEDIA_UNK 0x14aa +#define USB_VID_WIDEVIEW 0x14aa #define USB_VID_AVERMEDIA 0x07ca #define USB_VID_COMPRO 0x185b #define USB_VID_COMPRO_UNK 0x145f @@ -24,6 +24,8 @@ #define USB_VID_HANFTEK 0x15f4 #define USB_VID_HAUPPAUGE 0x2040 #define USB_VID_HYPER_PALTEK 0x1025 +#define USB_VID_KYE 0x0458 +#define USB_VID_MEDION 0x1660 #define USB_VID_VISIONPLUS 0x13d3 #define USB_VID_TWINHAN 0x1822 #define USB_VID_ULTIMA_ELECTRONIC 0x05d8 @@ -70,6 +72,8 @@ #define USB_PID_HANFTEK_UMT_010_WARM 0x0015 #define USB_PID_DTT200U_COLD 0x0201 #define USB_PID_DTT200U_WARM 0x0301 +#define USB_PID_WT220U_COLD 0x0222 +#define USB_PID_WT220U_WARM 0x0221 #define USB_PID_WINTV_NOVA_T_USB2_COLD 0x9300 #define USB_PID_WINTV_NOVA_T_USB2_WARM 0x9301 #define USB_PID_NEBULA_DIGITV 0x0201 @@ -78,6 +82,8 @@ #define USB_PID_DVICO_BLUEBIRD_LGDT 0xd820 #define USB_PID_DVICO_BLUEBIRD_LGZ201_1 0xdb01 #define USB_PID_DVICO_BLUEBIRD_TH7579_2 0xdb11 - +#define USB_PID_MEDION_MD95700 0x0932 +#define USB_PID_KYE_DVB_T_COLD 0x701e +#define USB_PID_KYE_DVB_T_WARM 0x701f #endif diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-init.c b/drivers/media/dvb/dvb-usb/dvb-usb-init.c index 3aadec974cf1..65f0c095abc9 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-init.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-init.c @@ -18,6 +18,10 @@ int dvb_usb_debug; module_param_named(debug,dvb_usb_debug, int, 0644); MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,pll=4,ts=8,err=16,rc=32,fw=64 (or-able))." DVB_USB_DEBUG_STATUS); +int dvb_usb_disable_rc_polling; +module_param_named(disable_rc_polling, dvb_usb_disable_rc_polling, int, 0644); +MODULE_PARM_DESC(disable_rc_polling, "disable remote control polling (default: 0)."); + /* general initialization functions */ int dvb_usb_exit(struct dvb_usb_device *d) { @@ -47,17 +51,17 @@ static int dvb_usb_init(struct dvb_usb_device *d) /* speed - when running at FULL speed we need a HW PID filter */ if (d->udev->speed == USB_SPEED_FULL && !(d->props.caps & DVB_USB_HAS_PID_FILTER)) { - err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a HW PID filter)"); + err("This USB2.0 device cannot be run on a USB1.1 port. (it lacks a hardware PID filter)"); return -ENODEV; } if ((d->udev->speed == USB_SPEED_FULL && d->props.caps & DVB_USB_HAS_PID_FILTER) || (d->props.caps & DVB_USB_NEED_PID_FILTERING)) { - info("will use the device's hw PID filter."); + info("will use the device's hardware PID filter (table count: %d).",d->props.pid_filter_count); d->pid_filtering = 1; d->max_feed_count = d->props.pid_filter_count; } else { - info("will pass the complete MPEG2 transport stream to the demuxer."); + info("will pass the complete MPEG2 transport stream to the software demuxer."); d->pid_filtering = 0; d->max_feed_count = 255; } diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c index 9f1e23f82bae..fc7800f1743e 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-remote.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-remote.c @@ -21,6 +21,10 @@ static void dvb_usb_read_remote_control(void *data) /* TODO: need a lock here. We can simply skip checking for the remote control if we're busy. */ + /* when the parameter has been set to 1 via sysfs while the driver was running */ + if (dvb_usb_disable_rc_polling) + return; + if (d->props.rc_query(d,&event,&state)) { err("error while querying for an remote control event."); goto schedule; @@ -35,7 +39,7 @@ static void dvb_usb_read_remote_control(void *data) d->last_event = event; case REMOTE_KEY_REPEAT: deb_rc("key repeated\n"); - input_event(&d->rc_input_dev, EV_KEY, event, 1); + input_event(&d->rc_input_dev, EV_KEY, d->last_event, 1); input_event(&d->rc_input_dev, EV_KEY, d->last_event, 0); input_sync(&d->rc_input_dev); break; @@ -85,7 +89,9 @@ schedule: int dvb_usb_remote_init(struct dvb_usb_device *d) { int i; - if (d->props.rc_key_map == NULL) + if (d->props.rc_key_map == NULL || + d->props.rc_query == NULL || + dvb_usb_disable_rc_polling) return 0; /* Initialise the remote-control structures.*/ @@ -154,12 +160,12 @@ int dvb_usb_nec_rc_key_to_event(struct dvb_usb_device *d, break; } /* See if we can match the raw key code. */ - for (i = 0; i < sizeof(keymap)/sizeof(struct dvb_usb_rc_key); i++) + for (i = 0; i < d->props.rc_key_map_size; i++) if (keymap[i].custom == keybuf[1] && keymap[i].data == keybuf[3]) { *event = keymap[i].event; *state = REMOTE_KEY_PRESSED; - break; + return 0; } deb_err("key mapping failed - no appropriate key found in keymapping\n"); break; diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c index 83d476fb410a..f5799a4c228e 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb-urb.c +++ b/drivers/media/dvb/dvb-usb/dvb-usb-urb.c @@ -24,11 +24,12 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, if ((ret = down_interruptible(&d->usb_sem))) return ret; + deb_xfer(">>> "); debug_dump(wbuf,wlen,deb_xfer); ret = usb_bulk_msg(d->udev,usb_sndbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint), wbuf,wlen,&actlen, - 2*HZ); + 2000); if (ret) err("bulk message failed: %d (%d/%d)",ret,wlen,actlen); @@ -42,12 +43,14 @@ int dvb_usb_generic_rw(struct dvb_usb_device *d, u8 *wbuf, u16 wlen, u8 *rbuf, ret = usb_bulk_msg(d->udev,usb_rcvbulkpipe(d->udev, d->props.generic_bulk_ctrl_endpoint),rbuf,rlen,&actlen, - 2*HZ); + 2000); if (ret) err("recv bulk message failed: %d",ret); - else + else { + deb_xfer("<<< "); debug_dump(rbuf,actlen,deb_xfer); + } } up(&d->usb_sem); @@ -61,12 +64,19 @@ int dvb_usb_generic_write(struct dvb_usb_device *d, u8 *buf, u16 len) } EXPORT_SYMBOL(dvb_usb_generic_write); -static void dvb_usb_bulk_urb_complete(struct urb *urb, struct pt_regs *ptregs) + +/* URB stuff for streaming */ +static void dvb_usb_urb_complete(struct urb *urb, struct pt_regs *ptregs) { struct dvb_usb_device *d = urb->context; + int ptype = usb_pipetype(urb->pipe); + int i; + u8 *b; - deb_ts("bulk urb completed. feedcount: %d, status: %d, length: %d\n",d->feedcount,urb->status, - urb->actual_length); + deb_ts("'%s' urb completed. feedcount: %d, status: %d, length: %d/%d, pack_num: %d, errors: %d\n", + ptype == PIPE_ISOCHRONOUS ? "isoc" : "bulk", d->feedcount, + urb->status,urb->actual_length,urb->transfer_buffer_length, + urb->number_of_packets,urb->error_count); switch (urb->status) { case 0: /* success */ @@ -81,11 +91,33 @@ static void dvb_usb_bulk_urb_complete(struct urb *urb, struct pt_regs *ptregs) break; } - if (d->feedcount > 0 && urb->actual_length > 0) { - if (d->state & DVB_USB_STATE_DVB) - dvb_dmx_swfilter(&d->demux, (u8*) urb->transfer_buffer,urb->actual_length); - } else - deb_ts("URB dropped because of feedcount.\n"); + if (d->feedcount > 0) { + if (d->state & DVB_USB_STATE_DVB) { + switch (ptype) { + case PIPE_ISOCHRONOUS: + b = (u8 *) urb->transfer_buffer; + for (i = 0; i < urb->number_of_packets; i++) { + if (urb->iso_frame_desc[i].status != 0) + deb_ts("iso frame descriptor has an error: %d\n",urb->iso_frame_desc[i].status); + else if (urb->iso_frame_desc[i].actual_length > 0) { + dvb_dmx_swfilter(&d->demux,b + urb->iso_frame_desc[i].offset, + urb->iso_frame_desc[i].actual_length); + } + urb->iso_frame_desc[i].status = 0; + urb->iso_frame_desc[i].actual_length = 0; + } + debug_dump(b,20,deb_ts); + break; + case PIPE_BULK: + if (urb->actual_length > 0) + dvb_dmx_swfilter(&d->demux, (u8 *) urb->transfer_buffer,urb->actual_length); + break; + default: + err("unkown endpoint type in completition handler."); + return; + } + } + } usb_submit_urb(urb,GFP_ATOMIC); } @@ -94,7 +126,7 @@ int dvb_usb_urb_kill(struct dvb_usb_device *d) { int i; for (i = 0; i < d->urbs_submitted; i++) { - deb_info("killing URB no. %d.\n",i); + deb_ts("killing URB no. %d.\n",i); /* stop the URB */ usb_kill_urb(d->urb_list[i]); @@ -107,9 +139,9 @@ int dvb_usb_urb_submit(struct dvb_usb_device *d) { int i,ret; for (i = 0; i < d->urbs_initialized; i++) { - deb_info("submitting URB no. %d\n",i); + deb_ts("submitting URB no. %d\n",i); if ((ret = usb_submit_urb(d->urb_list[i],GFP_ATOMIC))) { - err("could not submit URB no. %d - get them all back\n",i); + err("could not submit URB no. %d - get them all back",i); dvb_usb_urb_kill(d); return ret; } @@ -118,32 +150,78 @@ int dvb_usb_urb_submit(struct dvb_usb_device *d) return 0; } -static int dvb_usb_bulk_urb_init(struct dvb_usb_device *d) +static int dvb_usb_free_stream_buffers(struct dvb_usb_device *d) { - int i,bufsize = d->props.urb.count * d->props.urb.u.bulk.buffersize; + if (d->state & DVB_USB_STATE_URB_BUF) { + while (d->buf_num) { + d->buf_num--; + deb_mem("freeing buffer %d\n",d->buf_num); + usb_buffer_free(d->udev, d->buf_size, + d->buf_list[d->buf_num], d->dma_addr[d->buf_num]); + } + kfree(d->buf_list); + kfree(d->dma_addr); + } + + d->state &= ~DVB_USB_STATE_URB_BUF; - deb_info("allocate %d bytes as buffersize for all URBs\n",bufsize); - /* allocate the actual buffer for the URBs */ - if ((d->buffer = usb_buffer_alloc(d->udev, bufsize, SLAB_ATOMIC, &d->dma_handle)) == NULL) { - deb_info("not enough memory for urb-buffer allocation.\n"); + return 0; +} + +static int dvb_usb_allocate_stream_buffers(struct dvb_usb_device *d, int num, unsigned long size) +{ + d->buf_num = 0; + d->buf_size = size; + + deb_mem("all in all I will use %lu bytes for streaming\n",num*size); + + if ((d->buf_list = kmalloc(num*sizeof(u8 *), GFP_ATOMIC)) == NULL) + return -ENOMEM; + + if ((d->dma_addr = kmalloc(num*sizeof(dma_addr_t), GFP_ATOMIC)) == NULL) { + kfree(d->buf_list); return -ENOMEM; } - deb_info("allocation successful\n"); - memset(d->buffer,0,bufsize); + memset(d->buf_list,0,num*sizeof(u8 *)); + memset(d->dma_addr,0,num*sizeof(dma_addr_t)); d->state |= DVB_USB_STATE_URB_BUF; + for (d->buf_num = 0; d->buf_num < num; d->buf_num++) { + deb_mem("allocating buffer %d\n",d->buf_num); + if (( d->buf_list[d->buf_num] = + usb_buffer_alloc(d->udev, size, SLAB_ATOMIC, + &d->dma_addr[d->buf_num]) ) == NULL) { + deb_mem("not enough memory for urb-buffer allocation.\n"); + dvb_usb_free_stream_buffers(d); + return -ENOMEM; + } + deb_mem("buffer %d: %p (dma: %d)\n",d->buf_num,d->buf_list[d->buf_num],d->dma_addr[d->buf_num]); + memset(d->buf_list[d->buf_num],0,size); + } + deb_mem("allocation successful\n"); + + return 0; +} + +static int dvb_usb_bulk_urb_init(struct dvb_usb_device *d) +{ + int i; + + if ((i = dvb_usb_allocate_stream_buffers(d,d->props.urb.count, + d->props.urb.u.bulk.buffersize)) < 0) + return i; + /* allocate the URBs */ for (i = 0; i < d->props.urb.count; i++) { - if (!(d->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC))) { + if ((d->urb_list[i] = usb_alloc_urb(0,GFP_ATOMIC)) == NULL) return -ENOMEM; - } usb_fill_bulk_urb( d->urb_list[i], d->udev, usb_rcvbulkpipe(d->udev,d->props.urb.endpoint), - &d->buffer[i*d->props.urb.u.bulk.buffersize], + d->buf_list[i], d->props.urb.u.bulk.buffersize, - dvb_usb_bulk_urb_complete, d); + dvb_usb_urb_complete, d); d->urb_list[i]->transfer_flags = 0; d->urbs_initialized++; @@ -151,6 +229,47 @@ static int dvb_usb_bulk_urb_init(struct dvb_usb_device *d) return 0; } +static int dvb_usb_isoc_urb_init(struct dvb_usb_device *d) +{ + int i,j; + + if ((i = dvb_usb_allocate_stream_buffers(d,d->props.urb.count, + d->props.urb.u.isoc.framesize*d->props.urb.u.isoc.framesperurb)) < 0) + return i; + + /* allocate the URBs */ + for (i = 0; i < d->props.urb.count; i++) { + struct urb *urb; + int frame_offset = 0; + if ((d->urb_list[i] = + usb_alloc_urb(d->props.urb.u.isoc.framesperurb,GFP_ATOMIC)) == NULL) + return -ENOMEM; + + urb = d->urb_list[i]; + + urb->dev = d->udev; + urb->context = d; + urb->complete = dvb_usb_urb_complete; + urb->pipe = usb_rcvisocpipe(d->udev,d->props.urb.endpoint); + urb->transfer_flags = URB_ISO_ASAP | URB_NO_TRANSFER_DMA_MAP; + urb->interval = d->props.urb.u.isoc.interval; + urb->number_of_packets = d->props.urb.u.isoc.framesperurb; + urb->transfer_buffer_length = d->buf_size; + urb->transfer_buffer = d->buf_list[i]; + urb->transfer_dma = d->dma_addr[i]; + + for (j = 0; j < d->props.urb.u.isoc.framesperurb; j++) { + urb->iso_frame_desc[j].offset = frame_offset; + urb->iso_frame_desc[j].length = d->props.urb.u.isoc.framesize; + frame_offset += d->props.urb.u.isoc.framesize; + } + + d->urbs_initialized++; + } + return 0; + +} + int dvb_usb_urb_init(struct dvb_usb_device *d) { /* @@ -174,8 +293,7 @@ int dvb_usb_urb_init(struct dvb_usb_device *d) case DVB_USB_BULK: return dvb_usb_bulk_urb_init(d); case DVB_USB_ISOC: - err("isochronous transfer not yet implemented in dvb-usb."); - return -EINVAL; + return dvb_usb_isoc_urb_init(d); default: err("unkown URB-type for data transfer."); return -EINVAL; @@ -191,7 +309,7 @@ int dvb_usb_urb_exit(struct dvb_usb_device *d) if (d->state & DVB_USB_STATE_URB_LIST) { for (i = 0; i < d->urbs_initialized; i++) { if (d->urb_list[i] != NULL) { - deb_info("freeing URB no. %d.\n",i); + deb_mem("freeing URB no. %d.\n",i); /* free the URBs */ usb_free_urb(d->urb_list[i]); } @@ -202,10 +320,6 @@ int dvb_usb_urb_exit(struct dvb_usb_device *d) d->state &= ~DVB_USB_STATE_URB_LIST; } - if (d->state & DVB_USB_STATE_URB_BUF) - usb_buffer_free(d->udev, d->props.urb.u.bulk.buffersize * d->props.urb.count, - d->buffer, d->dma_handle); - - d->state &= ~DVB_USB_STATE_URB_BUF; + dvb_usb_free_stream_buffers(d); return 0; } diff --git a/drivers/media/dvb/dvb-usb/dvb-usb.h b/drivers/media/dvb/dvb-usb/dvb-usb.h index abcee1943f64..a80567caf508 100644 --- a/drivers/media/dvb/dvb-usb/dvb-usb.h +++ b/drivers/media/dvb/dvb-usb/dvb-usb.h @@ -189,12 +189,13 @@ struct dvb_usb_properties { struct { int framesperurb; int framesize; + int interval; } isoc; } u; } urb; int num_device_descs; - struct dvb_usb_device_description devices[8]; + struct dvb_usb_device_description devices[9]; }; @@ -207,19 +208,28 @@ struct dvb_usb_properties { * @udev: pointer to the device's struct usb_device. * @urb_list: array of dynamically allocated struct urb for the MPEG2-TS- * streaming. - * @buffer: buffer used to streaming. - * @dma_handle: dma_addr_t for buffer. + * + * @buf_num: number of buffer allocated. + * @buf_size: size of each buffer in buf_list. + * @buf_list: array containing all allocate buffers for streaming. + * @dma_addr: list of dma_addr_t for each buffer in buf_list. + * * @urbs_initialized: number of URBs initialized. * @urbs_submitted: number of URBs submitted. + * * @feedcount: number of reqested feeds (used for streaming-activation) * @pid_filtering: is hardware pid_filtering used or not. + * * @usb_sem: semaphore of USB control messages (reading needs two messages) * @i2c_sem: semaphore for i2c-transfers + * * @i2c_adap: device's i2c_adapter if it uses I2CoverUSB * @pll_addr: I2C address of the tuner for programming * @pll_init: array containing the initialization buffer * @pll_desc: pointer to the appropriate struct dvb_pll_desc - * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod + * + * @tuner_pass_ctrl: called to (de)activate tuner passthru of the demod or the board + * * @dvb_adap: device's dvb_adapter. * @dmxdev: device's dmxdev. * @demux: device's software demuxer. @@ -253,8 +263,12 @@ struct dvb_usb_device { /* usb */ struct usb_device *udev; struct urb **urb_list; - u8 *buffer; - dma_addr_t dma_handle; + + int buf_num; + unsigned long buf_size; + u8 **buf_list; + dma_addr_t *dma_addr; + int urbs_initialized; int urbs_submitted; diff --git a/drivers/media/dvb/dvb-usb/nova-t-usb2.c b/drivers/media/dvb/dvb-usb/nova-t-usb2.c index 9d83781aef95..258a92bfbcc7 100644 --- a/drivers/media/dvb/dvb-usb/nova-t-usb2.c +++ b/drivers/media/dvb/dvb-usb/nova-t-usb2.c @@ -203,7 +203,7 @@ static struct dvb_usb_properties nova_t_properties = { static struct usb_driver nova_t_driver = { .owner = THIS_MODULE, - .name = "Hauppauge WinTV-NOVA-T usb2", + .name = "dvb_usb_nova_t_usb2", .probe = nova_t_probe, .disconnect = dvb_usb_device_exit, .id_table = nova_t_table, diff --git a/drivers/media/dvb/dvb-usb/umt-010.c b/drivers/media/dvb/dvb-usb/umt-010.c index aa560422ce7c..2112ac3cf5e2 100644 --- a/drivers/media/dvb/dvb-usb/umt-010.c +++ b/drivers/media/dvb/dvb-usb/umt-010.c @@ -129,7 +129,7 @@ static struct dvb_usb_properties umt_properties = { static struct usb_driver umt_driver = { .owner = THIS_MODULE, - .name = "HanfTek UMT-010 USB2.0 DVB-T devices", + .name = "dvb_usb_umt_010", .probe = umt_probe, .disconnect = dvb_usb_device_exit, .id_table = umt_table, diff --git a/drivers/media/dvb/dvb-usb/vp7045.c b/drivers/media/dvb/dvb-usb/vp7045.c index 02ecc9a8e3b6..9ac95f54f9fc 100644 --- a/drivers/media/dvb/dvb-usb/vp7045.c +++ b/drivers/media/dvb/dvb-usb/vp7045.c @@ -44,7 +44,7 @@ int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, if (usb_control_msg(d->udev, usb_sndctrlpipe(d->udev,0), TH_COMMAND_OUT, USB_TYPE_VENDOR | USB_DIR_OUT, 0, 0, - outbuf, 20, 2*HZ) != 20) { + outbuf, 20, 2000) != 20) { err("USB control message 'out' went wrong."); ret = -EIO; goto unlock; @@ -55,7 +55,7 @@ int vp7045_usb_op(struct dvb_usb_device *d, u8 cmd, u8 *out, int outlen, u8 *in, if (usb_control_msg(d->udev, usb_rcvctrlpipe(d->udev,0), TH_COMMAND_IN, USB_TYPE_VENDOR | USB_DIR_IN, 0, 0, - inbuf, 12, 2*HZ) != 12) { + inbuf, 12, 2000) != 12) { err("USB control message 'in' went wrong."); ret = -EIO; goto unlock; @@ -94,16 +94,41 @@ static int vp7045_power_ctrl(struct dvb_usb_device *d, int onoff) /* The keymapping struct. Somehow this should be loaded to the driver, but * currently it is hardcoded. */ static struct dvb_usb_rc_key vp7045_rc_keys[] = { - /* insert the keys like this. to make the raw keys visible, enable - * debug=0x04 when loading dvb-usb-vp7045. */ - - /* these keys are probably wrong. I don't have a working IR-receiver on my - * vp7045, so I can't test it. Patches are welcome. */ - { 0x00, 0x01, KEY_1 }, - { 0x00, 0x02, KEY_2 }, + { 0x00, 0x16, KEY_POWER }, + { 0x00, 0x10, KEY_MUTE }, + { 0x00, 0x03, KEY_1 }, + { 0x00, 0x01, KEY_2 }, + { 0x00, 0x06, KEY_3 }, + { 0x00, 0x09, KEY_4 }, + { 0x00, 0x1d, KEY_5 }, + { 0x00, 0x1f, KEY_6 }, + { 0x00, 0x0d, KEY_7 }, + { 0x00, 0x19, KEY_8 }, + { 0x00, 0x1b, KEY_9 }, + { 0x00, 0x15, KEY_0 }, + { 0x00, 0x05, KEY_CHANNELUP }, + { 0x00, 0x02, KEY_CHANNELDOWN }, + { 0x00, 0x1e, KEY_VOLUMEUP }, + { 0x00, 0x0a, KEY_VOLUMEDOWN }, + { 0x00, 0x11, KEY_RECORD }, + { 0x00, 0x17, KEY_FAVORITES }, /* Heart symbol - Channel list. */ + { 0x00, 0x14, KEY_PLAY }, + { 0x00, 0x1a, KEY_STOP }, + { 0x00, 0x40, KEY_REWIND }, + { 0x00, 0x12, KEY_FASTFORWARD }, + { 0x00, 0x0e, KEY_PREVIOUS }, /* Recall - Previous channel. */ + { 0x00, 0x4c, KEY_PAUSE }, + { 0x00, 0x4d, KEY_SCREEN }, /* Full screen mode. */ + { 0x00, 0x54, KEY_AUDIO }, /* MTS - Switch to secondary audio. */ + { 0x00, 0x0c, KEY_CANCEL }, /* Cancel */ + { 0x00, 0x1c, KEY_EPG }, /* EPG */ + { 0x00, 0x00, KEY_TAB }, /* Tab */ + { 0x00, 0x48, KEY_INFO }, /* Preview */ + { 0x00, 0x04, KEY_LIST }, /* RecordList */ + { 0x00, 0x0f, KEY_TEXT } /* Teletext */ }; -static int vp7045_rc_query(struct dvb_usb_device *d, u32 *key_buf, int *state) +static int vp7045_rc_query(struct dvb_usb_device *d, u32 *event, int *state) { u8 key; int i; @@ -119,7 +144,7 @@ static int vp7045_rc_query(struct dvb_usb_device *d, u32 *key_buf, int *state) for (i = 0; i < sizeof(vp7045_rc_keys)/sizeof(struct dvb_usb_rc_key); i++) if (vp7045_rc_keys[i].data == key) { *state = REMOTE_KEY_PRESSED; - *key_buf = vp7045_rc_keys[i].event; + *event = vp7045_rc_keys[i].event; break; } return 0; @@ -230,7 +255,7 @@ static struct dvb_usb_properties vp7045_properties = { /* usb specific object needed to register this driver with the usb subsystem */ static struct usb_driver vp7045_usb_driver = { .owner = THIS_MODULE, - .name = "dvb-usb-vp7045", + .name = "dvb_usb_vp7045", .probe = vp7045_usb_probe, .disconnect = dvb_usb_device_exit, .id_table = vp7045_usb_table, diff --git a/drivers/media/dvb/frontends/Kconfig b/drivers/media/dvb/frontends/Kconfig index b4fddf513ebe..d847c62bd837 100644 --- a/drivers/media/dvb/frontends/Kconfig +++ b/drivers/media/dvb/frontends/Kconfig @@ -40,6 +40,12 @@ config DVB_VES1X93 help A DVB-S tuner module. Say Y when you want to support this frontend. +config DVB_S5H1420 + tristate "Samsung S5H1420 based" + depends on DVB_CORE + help + A DVB-S tuner module. Say Y when you want to support this frontend. + comment "DVB-T (terrestrial) frontends" depends on DVB_CORE @@ -181,4 +187,11 @@ config DVB_BCM3510 An ATSC 8VSB/16VSB and QAM64/256 tuner module. Say Y when you want to support this frontend. +config DVB_LGDT3302 + tristate "LGDT3302 based (DViCO FusionHDTV3 Gold)" + depends on DVB_CORE + help + An ATSC 8VSB and QAM64/256 tuner module. Say Y when you want + to support this frontend. + endmenu diff --git a/drivers/media/dvb/frontends/Makefile b/drivers/media/dvb/frontends/Makefile index 91d6d3576d3d..de5e240cba7f 100644 --- a/drivers/media/dvb/frontends/Makefile +++ b/drivers/media/dvb/frontends/Makefile @@ -29,3 +29,5 @@ obj-$(CONFIG_DVB_NXT2002) += nxt2002.o obj-$(CONFIG_DVB_OR51211) += or51211.o obj-$(CONFIG_DVB_OR51132) += or51132.o obj-$(CONFIG_DVB_BCM3510) += bcm3510.o +obj-$(CONFIG_DVB_S5H1420) += s5h1420.o +obj-$(CONFIG_DVB_LGDT3302) += lgdt3302.o diff --git a/drivers/media/dvb/frontends/cx22702.c b/drivers/media/dvb/frontends/cx22702.c index f4aa44136c7c..9f639297a9f2 100644 --- a/drivers/media/dvb/frontends/cx22702.c +++ b/drivers/media/dvb/frontends/cx22702.c @@ -76,7 +76,6 @@ static u8 init_tab [] = { 0x49, 0x56, 0x6b, 0x1e, 0xc8, 0x02, - 0xf8, 0x02, 0xf9, 0x00, 0xfa, 0x00, 0xfb, 0x00, @@ -203,7 +202,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet struct cx22702_state* state = fe->demodulator_priv; /* set PLL */ - cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) &0xfe); + cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) &0xfe); if (state->config->pll_set) { state->config->pll_set(fe, p); } else if (state->config->pll_desc) { @@ -217,7 +216,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet } else { BUG(); } - cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) | 1); + cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) | 1); /* set inversion */ cx22702_set_inversion (state, p->inversion); @@ -256,7 +255,7 @@ static int cx22702_set_tps (struct dvb_frontend* fe, struct dvb_frontend_paramet cx22702_writereg(state, 0x0B, cx22702_readreg(state, 0x0B) & 0xfc ); cx22702_writereg(state, 0x0C, (cx22702_readreg(state, 0x0C) & 0xBF) | 0x40 ); cx22702_writereg(state, 0x00, 0x01); /* Begin aquisition */ - printk("%s: Autodetecting\n",__FUNCTION__); + dprintk("%s: Autodetecting\n",__FUNCTION__); return 0; } @@ -347,10 +346,11 @@ static int cx22702_init (struct dvb_frontend* fe) for (i=0; i<sizeof(init_tab); i+=2) cx22702_writereg (state, init_tab[i], init_tab[i+1]); + cx22702_writereg (state, 0xf8, (state->config->output_mode << 1) & 0x02); /* init PLL */ if (state->config->pll_init) { - cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) &0xfe); + cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) & 0xfe); state->config->pll_init(fe); cx22702_writereg (state, 0x0D, cx22702_readreg(state,0x0D) | 1); } @@ -440,8 +440,10 @@ static int cx22702_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) /* RS Uncorrectable Packet Count then reset */ _ucblocks = cx22702_readreg (state, 0xE3); - if (state->prevUCBlocks < _ucblocks) *ucblocks = (_ucblocks - state->prevUCBlocks); - else *ucblocks = state->prevUCBlocks - _ucblocks; + if (state->prevUCBlocks < _ucblocks) + *ucblocks = (_ucblocks - state->prevUCBlocks); + else + *ucblocks = state->prevUCBlocks - _ucblocks; state->prevUCBlocks = _ucblocks; return 0; @@ -457,6 +459,12 @@ static int cx22702_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_par return cx22702_get_tps (state, &p->u.ofdm); } +static int cx22702_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings *tune) +{ + tune->min_delay_ms = 1000; + return 0; +} + static void cx22702_release(struct dvb_frontend* fe) { struct cx22702_state* state = fe->demodulator_priv; @@ -472,7 +480,8 @@ struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, /* allocate memory for the internal state */ state = kmalloc(sizeof(struct cx22702_state), GFP_KERNEL); - if (state == NULL) goto error; + if (state == NULL) + goto error; /* setup the state */ state->config = config; @@ -481,7 +490,8 @@ struct dvb_frontend* cx22702_attach(const struct cx22702_config* config, state->prevUCBlocks = 0; /* check if the demod is there */ - if (cx22702_readreg(state, 0x1f) != 0x3) goto error; + if (cx22702_readreg(state, 0x1f) != 0x3) + goto error; /* create dvb_frontend */ state->frontend.ops = &state->ops; @@ -514,6 +524,7 @@ static struct dvb_frontend_ops cx22702_ops = { .set_frontend = cx22702_set_tps, .get_frontend = cx22702_get_frontend, + .get_tune_settings = cx22702_get_tune_settings, .read_status = cx22702_read_status, .read_ber = cx22702_read_ber, diff --git a/drivers/media/dvb/frontends/cx22702.h b/drivers/media/dvb/frontends/cx22702.h index 559fdb906669..11f86806756e 100644 --- a/drivers/media/dvb/frontends/cx22702.h +++ b/drivers/media/dvb/frontends/cx22702.h @@ -35,6 +35,11 @@ struct cx22702_config /* the demodulator's i2c address */ u8 demod_address; + /* serial/parallel output */ +#define CX22702_PARALLEL_OUTPUT 0 +#define CX22702_SERIAL_OUTPUT 1 + u8 output_mode; + /* PLL maintenance */ u8 pll_address; struct dvb_pll_desc *pll_desc; diff --git a/drivers/media/dvb/frontends/dvb-pll.c b/drivers/media/dvb/frontends/dvb-pll.c index f73b5f48e235..5afeaa9b43b4 100644 --- a/drivers/media/dvb/frontends/dvb-pll.c +++ b/drivers/media/dvb/frontends/dvb-pll.c @@ -55,7 +55,7 @@ struct dvb_pll_desc dvb_pll_thomson_dtt7610 = { }; EXPORT_SYMBOL(dvb_pll_thomson_dtt7610); -static void thomson_dtt759x_bw(u8 *buf, int bandwidth) +static void thomson_dtt759x_bw(u8 *buf, u32 freq, int bandwidth) { if (BANDWIDTH_7_MHZ == bandwidth) buf[3] |= 0x10; @@ -93,6 +93,32 @@ struct dvb_pll_desc dvb_pll_lg_z201 = { }; EXPORT_SYMBOL(dvb_pll_lg_z201); +struct dvb_pll_desc dvb_pll_microtune_4042 = { + .name = "Microtune 4042 FI5", + .min = 57000000, + .max = 858000000, + .count = 3, + .entries = { + { 162000000, 44000000, 62500, 0x8e, 0xa1 }, + { 457000000, 44000000, 62500, 0x8e, 0x91 }, + { 999999999, 44000000, 62500, 0x8e, 0x31 }, + }, +}; +EXPORT_SYMBOL(dvb_pll_microtune_4042); + +struct dvb_pll_desc dvb_pll_thomson_dtt7611 = { + .name = "Thomson dtt7611", + .min = 44000000, + .max = 958000000, + .count = 3, + .entries = { + { 157250000, 44000000, 62500, 0x8e, 0x39 }, + { 454000000, 44000000, 62500, 0x8e, 0x3a }, + { 999999999, 44000000, 62500, 0x8e, 0x3c }, + }, +}; +EXPORT_SYMBOL(dvb_pll_thomson_dtt7611); + struct dvb_pll_desc dvb_pll_unknown_1 = { .name = "unknown 1", /* used by dntv live dvb-t */ .min = 174000000, @@ -146,7 +172,7 @@ EXPORT_SYMBOL(dvb_pll_env57h1xd5); /* Philips TDA6650/TDA6651 * used in Panasonic ENV77H11D5 */ -static void tda665x_bw(u8 *buf, int bandwidth) +static void tda665x_bw(u8 *buf, u32 freq, int bandwidth) { if (bandwidth == BANDWIDTH_8_MHZ) buf[3] |= 0x08; @@ -178,7 +204,7 @@ EXPORT_SYMBOL(dvb_pll_tda665x); /* Infineon TUA6034 * used in LG TDTP E102P */ -static void tua6034_bw(u8 *buf, int bandwidth) +static void tua6034_bw(u8 *buf, u32 freq, int bandwidth) { if (BANDWIDTH_7_MHZ != bandwidth) buf[3] |= 0x08; @@ -198,6 +224,57 @@ struct dvb_pll_desc dvb_pll_tua6034 = { }; EXPORT_SYMBOL(dvb_pll_tua6034); +/* Philips FMD1216ME + * used in Medion Hybrid PCMCIA card and USB Box + */ +static void fmd1216me_bw(u8 *buf, u32 freq, int bandwidth) +{ + if (bandwidth == BANDWIDTH_8_MHZ && freq >= 158870000) + buf[3] |= 0x08; +} + +struct dvb_pll_desc dvb_pll_fmd1216me = { + .name = "Philips FMD1216ME", + .min = 50870000, + .max = 858000000, + .setbw = fmd1216me_bw, + .count = 7, + .entries = { + { 143870000, 36213333, 166667, 0xbc, 0x41 }, + { 158870000, 36213333, 166667, 0xf4, 0x41 }, + { 329870000, 36213333, 166667, 0xbc, 0x42 }, + { 441870000, 36213333, 166667, 0xf4, 0x42 }, + { 625870000, 36213333, 166667, 0xbc, 0x44 }, + { 803870000, 36213333, 166667, 0xf4, 0x44 }, + { 999999999, 36213333, 166667, 0xfc, 0x44 }, + } +}; +EXPORT_SYMBOL(dvb_pll_fmd1216me); + +/* ALPS TDED4 + * used in Nebula-Cards and USB boxes + */ +static void tded4_bw(u8 *buf, u32 freq, int bandwidth) +{ + if (bandwidth == BANDWIDTH_8_MHZ) + buf[3] |= 0x04; +} + +struct dvb_pll_desc dvb_pll_tded4 = { + .name = "ALPS TDED4", + .min = 47000000, + .max = 863000000, + .setbw = tded4_bw, + .count = 4, + .entries = { + { 153000000, 36166667, 166667, 0x85, 0x01 }, + { 470000000, 36166667, 166667, 0x85, 0x02 }, + { 823000000, 36166667, 166667, 0x85, 0x08 }, + { 999999999, 36166667, 166667, 0x85, 0x88 }, + } +}; +EXPORT_SYMBOL(dvb_pll_tded4); + /* ----------------------------------------------------------- */ /* code */ @@ -231,7 +308,7 @@ int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf, buf[3] = desc->entries[i].cb2; if (desc->setbw) - desc->setbw(buf, bandwidth); + desc->setbw(buf, freq, bandwidth); if (debug) printk("pll: %s: div=%d | buf=0x%02x,0x%02x,0x%02x,0x%02x\n", diff --git a/drivers/media/dvb/frontends/dvb-pll.h b/drivers/media/dvb/frontends/dvb-pll.h index b796778624b6..cb794759d89e 100644 --- a/drivers/media/dvb/frontends/dvb-pll.h +++ b/drivers/media/dvb/frontends/dvb-pll.h @@ -9,7 +9,7 @@ struct dvb_pll_desc { char *name; u32 min; u32 max; - void (*setbw)(u8 *buf, int bandwidth); + void (*setbw)(u8 *buf, u32 freq, int bandwidth); int count; struct { u32 limit; @@ -24,12 +24,16 @@ extern struct dvb_pll_desc dvb_pll_thomson_dtt7579; extern struct dvb_pll_desc dvb_pll_thomson_dtt759x; extern struct dvb_pll_desc dvb_pll_thomson_dtt7610; extern struct dvb_pll_desc dvb_pll_lg_z201; +extern struct dvb_pll_desc dvb_pll_microtune_4042; +extern struct dvb_pll_desc dvb_pll_thomson_dtt7611; extern struct dvb_pll_desc dvb_pll_unknown_1; extern struct dvb_pll_desc dvb_pll_tua6010xs; extern struct dvb_pll_desc dvb_pll_env57h1xd5; extern struct dvb_pll_desc dvb_pll_tua6034; extern struct dvb_pll_desc dvb_pll_tda665x; +extern struct dvb_pll_desc dvb_pll_fmd1216me; +extern struct dvb_pll_desc dvb_pll_tded4; int dvb_pll_configure(struct dvb_pll_desc *desc, u8 *buf, u32 freq, int bandwidth); diff --git a/drivers/media/dvb/frontends/l64781.c b/drivers/media/dvb/frontends/l64781.c index 031a1ddc7d11..faaad1ae8559 100644 --- a/drivers/media/dvb/frontends/l64781.c +++ b/drivers/media/dvb/frontends/l64781.c @@ -474,11 +474,12 @@ static int l64781_init(struct dvb_frontend* fe) return 0; } -static int l64781_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +static int l64781_get_tune_settings(struct dvb_frontend* fe, + struct dvb_frontend_tune_settings* fesettings) { - fesettings->min_delay_ms = 200; - fesettings->step_size = 166667; - fesettings->max_drift = 166667*2; + fesettings->min_delay_ms = 4000; + fesettings->step_size = 0; + fesettings->max_drift = 0; return 0; } diff --git a/drivers/media/dvb/frontends/lgdt3302.c b/drivers/media/dvb/frontends/lgdt3302.c new file mode 100644 index 000000000000..2eea03d218cd --- /dev/null +++ b/drivers/media/dvb/frontends/lgdt3302.c @@ -0,0 +1,609 @@ +/* + * Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> + * + * Based on code from Kirk Lapray <kirk_lapray@bigfoot.com> + * Copyright (C) 2005 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +/* + * NOTES ABOUT THIS DRIVER + * + * This driver supports DViCO FusionHDTV 3 Gold under Linux. + * + * TODO: + * BER and signal strength always return 0. + * + */ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/init.h> +#include <linux/delay.h> +#include <asm/byteorder.h> + +#include "dvb_frontend.h" +#include "dvb-pll.h" +#include "lgdt3302_priv.h" +#include "lgdt3302.h" + +static int debug = 0; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug,"Turn on/off lgdt3302 frontend debugging (default:off)."); +#define dprintk(args...) \ +do { \ +if (debug) printk(KERN_DEBUG "lgdt3302: " args); \ +} while (0) + +struct lgdt3302_state +{ + struct i2c_adapter* i2c; + struct dvb_frontend_ops ops; + + /* Configuration settings */ + const struct lgdt3302_config* config; + + struct dvb_frontend frontend; + + /* Demodulator private data */ + fe_modulation_t current_modulation; + + /* Tuner private data */ + u32 current_frequency; +}; + +static int i2c_writebytes (struct lgdt3302_state* state, + u8 addr, /* demod_address or pll_address */ + u8 *buf, /* data bytes to send */ + int len /* number of bytes to send */ ) +{ + if (addr == state->config->pll_address) { + struct i2c_msg msg = + { .addr = addr, .flags = 0, .buf = buf, .len = len }; + int err; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + } else { + u8 tmp[] = { buf[0], buf[1] }; + struct i2c_msg msg = + { .addr = addr, .flags = 0, .buf = tmp, .len = 2 }; + int err; + int i; + + for (i=1; i<len; i++) { + tmp[1] = buf[i]; + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt3302: %s error (addr %02x <- %02x, err == %i)\n", __FUNCTION__, addr, buf[0], err); + if (err < 0) + return err; + else + return -EREMOTEIO; + } + tmp[0]++; + } + } + return 0; +} +static int i2c_readbytes (struct lgdt3302_state* state, + u8 addr, /* demod_address or pll_address */ + u8 *buf, /* holds data bytes read */ + int len /* number of bytes to read */ ) +{ + struct i2c_msg msg = + { .addr = addr, .flags = I2C_M_RD, .buf = buf, .len = len }; + int err; + + if ((err = i2c_transfer(state->i2c, &msg, 1)) != 1) { + printk(KERN_WARNING "lgdt3302: %s error (addr %02x, err == %i)\n", __FUNCTION__, addr, err); + return -EREMOTEIO; + } + return 0; +} + +/* + * This routine writes the register (reg) to the demod bus + * then reads the data returned for (len) bytes. + */ + +static u8 i2c_selectreadbytes (struct lgdt3302_state* state, + enum I2C_REG reg, u8* buf, int len) +{ + u8 wr [] = { reg }; + struct i2c_msg msg [] = { + { .addr = state->config->demod_address, + .flags = 0, .buf = wr, .len = 1 }, + { .addr = state->config->demod_address, + .flags = I2C_M_RD, .buf = buf, .len = len }, + }; + int ret; + ret = i2c_transfer(state->i2c, msg, 2); + if (ret != 2) { + printk(KERN_WARNING "lgdt3302: %s: addr 0x%02x select 0x%02x error (ret == %i)\n", __FUNCTION__, state->config->demod_address, reg, ret); + } else { + ret = 0; + } + return ret; +} + +/* Software reset */ +int lgdt3302_SwReset(struct lgdt3302_state* state) +{ + u8 ret; + u8 reset[] = { + IRQ_MASK, + 0x00 /* bit 6 is active low software reset + * bits 5-0 are 1 to mask interrupts */ + }; + + ret = i2c_writebytes(state, + state->config->demod_address, + reset, sizeof(reset)); + if (ret == 0) { + /* spec says reset takes 100 ns why wait */ + /* mdelay(100); */ /* keep low for 100mS */ + reset[1] = 0x7f; /* force reset high (inactive) + * and unmask interrupts */ + ret = i2c_writebytes(state, + state->config->demod_address, + reset, sizeof(reset)); + } + /* Spec does not indicate a need for this either */ + /*mdelay(5); */ /* wait 5 msec before doing more */ + return ret; +} + +static int lgdt3302_init(struct dvb_frontend* fe) +{ + /* Hardware reset is done using gpio[0] of cx23880x chip. + * I'd like to do it here, but don't know how to find chip address. + * cx88-cards.c arranges for the reset bit to be inactive (high). + * Maybe there needs to be a callable function in cx88-core or + * the caller of this function needs to do it. */ + + dprintk("%s entered\n", __FUNCTION__); + return lgdt3302_SwReset((struct lgdt3302_state*) fe->demodulator_priv); +} + +static int lgdt3302_read_ber(struct dvb_frontend* fe, u32* ber) +{ + *ber = 0; /* Dummy out for now */ + return 0; +} + +static int lgdt3302_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + u8 buf[2]; + + i2c_selectreadbytes(state, PACKET_ERR_COUNTER1, buf, sizeof(buf)); + + *ucblocks = (buf[0] << 8) | buf[1]; + return 0; +} + +static int lgdt3302_set_parameters(struct dvb_frontend* fe, + struct dvb_frontend_parameters *param) +{ + u8 buf[4]; + struct lgdt3302_state* state = + (struct lgdt3302_state*) fe->demodulator_priv; + + /* Use 50MHz parameter values from spec sheet since xtal is 50 */ + static u8 top_ctrl_cfg[] = { TOP_CONTROL, 0x03 }; + static u8 vsb_freq_cfg[] = { VSB_CARRIER_FREQ0, 0x00, 0x87, 0x8e, 0x01 }; + static u8 demux_ctrl_cfg[] = { DEMUX_CONTROL, 0xfb }; + static u8 agc_rf_cfg[] = { AGC_RF_BANDWIDTH0, 0x40, 0x93, 0x00 }; + static u8 agc_ctrl_cfg[] = { AGC_FUNC_CTRL2, 0xc6, 0x40 }; + static u8 agc_delay_cfg[] = { AGC_DELAY0, 0x00, 0x00, 0x00 }; + static u8 agc_loop_cfg[] = { AGC_LOOP_BANDWIDTH0, 0x08, 0x9a }; + + /* Change only if we are actually changing the modulation */ + if (state->current_modulation != param->u.vsb.modulation) { + int value; + + switch(param->u.vsb.modulation) { + case VSB_8: + dprintk("%s: VSB_8 MODE\n", __FUNCTION__); + + /* Select VSB mode and serial MPEG interface */ + top_ctrl_cfg[1] = 0x07; + break; + + case QAM_64: + dprintk("%s: QAM_64 MODE\n", __FUNCTION__); + + /* Select QAM_64 mode and serial MPEG interface */ + top_ctrl_cfg[1] = 0x04; + break; + + case QAM_256: + dprintk("%s: QAM_256 MODE\n", __FUNCTION__); + + /* Select QAM_256 mode and serial MPEG interface */ + top_ctrl_cfg[1] = 0x05; + break; + default: + printk(KERN_WARNING "lgdt3302: %s: Modulation type(%d) UNSUPPORTED\n", __FUNCTION__, param->u.vsb.modulation); + return -1; + } + /* Initializations common to all modes */ + + /* Select the requested mode */ + i2c_writebytes(state, state->config->demod_address, + top_ctrl_cfg, sizeof(top_ctrl_cfg)); + + /* Change the value of IFBW[11:0] + of AGC IF/RF loop filter bandwidth register */ + i2c_writebytes(state, state->config->demod_address, + agc_rf_cfg, sizeof(agc_rf_cfg)); + + /* Change the value of bit 6, 'nINAGCBY' and + 'NSSEL[1:0] of ACG function control register 2 */ + /* Change the value of bit 6 'RFFIX' + of AGC function control register 3 */ + i2c_writebytes(state, state->config->demod_address, + agc_ctrl_cfg, sizeof(agc_ctrl_cfg)); + + /* Change the TPCLK pin polarity + data is valid on falling clock */ + i2c_writebytes(state, state->config->demod_address, + demux_ctrl_cfg, sizeof(demux_ctrl_cfg)); + + /* Change the value of NCOCTFV[25:0] of carrier + recovery center frequency register */ + i2c_writebytes(state, state->config->demod_address, + vsb_freq_cfg, sizeof(vsb_freq_cfg)); + /* Set the value of 'INLVTHD' register 0x2a/0x2c + to value from 'IFACC' register 0x39/0x3b -1 */ + i2c_selectreadbytes(state, AGC_RFIF_ACC0, + &agc_delay_cfg[1], 3); + value = ((agc_delay_cfg[1] & 0x0f) << 8) | agc_delay_cfg[3]; + value = value -1; + dprintk("%s IFACC -1 = 0x%03x\n", __FUNCTION__, value); + agc_delay_cfg[1] = (value >> 8) & 0x0f; + agc_delay_cfg[2] = 0x00; + agc_delay_cfg[3] = value & 0xff; + i2c_writebytes(state, state->config->demod_address, + agc_delay_cfg, sizeof(agc_delay_cfg)); + + /* Change the value of IAGCBW[15:8] + of inner AGC loop filter bandwith */ + i2c_writebytes(state, state->config->demod_address, + agc_loop_cfg, sizeof(agc_loop_cfg)); + + state->config->set_ts_params(fe, 0); + state->current_modulation = param->u.vsb.modulation; + } + + /* Change only if we are actually changing the channel */ + if (state->current_frequency != param->frequency) { + dvb_pll_configure(state->config->pll_desc, buf, + param->frequency, 0); + dprintk("%s: tuner bytes: 0x%02x 0x%02x " + "0x%02x 0x%02x\n", __FUNCTION__, buf[0],buf[1],buf[2],buf[3]); + i2c_writebytes(state, state->config->pll_address ,buf, 4); + + /* Check the status of the tuner pll */ + i2c_readbytes(state, state->config->pll_address, buf, 1); + dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]); + + /* Update current frequency */ + state->current_frequency = param->frequency; + } + lgdt3302_SwReset(state); + return 0; +} + +static int lgdt3302_get_frontend(struct dvb_frontend* fe, + struct dvb_frontend_parameters* param) +{ + struct lgdt3302_state *state = fe->demodulator_priv; + param->frequency = state->current_frequency; + return 0; +} + +static int lgdt3302_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + u8 buf[3]; + + *status = 0; /* Reset status result */ + + /* Check the status of the tuner pll */ + i2c_readbytes(state, state->config->pll_address, buf, 1); + dprintk("%s: tuner status byte = 0x%02x\n", __FUNCTION__, buf[0]); + if ((buf[0] & 0xc0) != 0x40) + return 0; /* Tuner PLL not locked or not powered on */ + + /* + * You must set the Mask bits to 1 in the IRQ_MASK in order + * to see that status bit in the IRQ_STATUS register. + * This is done in SwReset(); + */ + + /* AGC status register */ + i2c_selectreadbytes(state, AGC_STATUS, buf, 1); + dprintk("%s: AGC_STATUS = 0x%02x\n", __FUNCTION__, buf[0]); + if ((buf[0] & 0x0c) == 0x8){ + /* Test signal does not exist flag */ + /* as well as the AGC lock flag. */ + *status |= FE_HAS_SIGNAL; + } else { + /* Without a signal all other status bits are meaningless */ + return 0; + } + + /* signal status */ + i2c_selectreadbytes(state, TOP_CONTROL, buf, sizeof(buf)); + dprintk("%s: TOP_CONTROL = 0x%02x, IRO_MASK = 0x%02x, IRQ_STATUS = 0x%02x\n", __FUNCTION__, buf[0], buf[1], buf[2]); + +#if 0 + /* Alternative method to check for a signal */ + /* using the SNR good/bad interrupts. */ + if ((buf[2] & 0x30) == 0x10) + *status |= FE_HAS_SIGNAL; +#endif + + /* sync status */ + if ((buf[2] & 0x03) == 0x01) { + *status |= FE_HAS_SYNC; + } + + /* FEC error status */ + if ((buf[2] & 0x0c) == 0x08) { + *status |= FE_HAS_LOCK; + *status |= FE_HAS_VITERBI; + } + + /* Carrier Recovery Lock Status Register */ + i2c_selectreadbytes(state, CARRIER_LOCK, buf, 1); + dprintk("%s: CARRIER_LOCK = 0x%02x\n", __FUNCTION__, buf[0]); + switch (state->current_modulation) { + case QAM_256: + case QAM_64: + /* Need to undestand why there are 3 lock levels here */ + if ((buf[0] & 0x07) == 0x07) + *status |= FE_HAS_CARRIER; + break; + case VSB_8: + if ((buf[0] & 0x80) == 0x80) + *status |= FE_HAS_CARRIER; + break; + default: + printk("KERN_WARNING lgdt3302: %s: Modulation set to unsupported value\n", __FUNCTION__); + } + + return 0; +} + +static int lgdt3302_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + /* not directly available. */ + return 0; +} + +static int lgdt3302_read_snr(struct dvb_frontend* fe, u16* snr) +{ +#ifdef SNR_IN_DB + /* + * Spec sheet shows formula for SNR_EQ = 10 log10(25 * 24**2 / noise) + * and SNR_PH = 10 log10(25 * 32**2 / noise) for equalizer and phase tracker + * respectively. The following tables are built on these formulas. + * The usual definition is SNR = 20 log10(signal/noise) + * If the specification is wrong the value retuned is 1/2 the actual SNR in db. + * + * This table is a an ordered list of noise values computed by the + * formula from the spec sheet such that the index into the table + * starting at 43 or 45 is the SNR value in db. There are duplicate noise + * value entries at the beginning because the SNR varies more than + * 1 db for a change of 1 digit in noise at very small values of noise. + * + * Examples from SNR_EQ table: + * noise SNR + * 0 43 + * 1 42 + * 2 39 + * 3 37 + * 4 36 + * 5 35 + * 6 34 + * 7 33 + * 8 33 + * 9 32 + * 10 32 + * 11 31 + * 12 31 + * 13 30 + */ + + static const u32 SNR_EQ[] = + { 1, 2, 2, 2, 3, 3, 4, 4, 5, 7, + 9, 11, 13, 17, 21, 26, 33, 41, 52, 65, + 81, 102, 129, 162, 204, 257, 323, 406, 511, 644, + 810, 1020, 1284, 1616, 2035, 2561, 3224, 4059, 5110, 6433, + 8098, 10195, 12835, 16158, 20341, 25608, 32238, 40585, 51094, 64323, + 80978, 101945, 128341, 161571, 203406, 256073, 0x40000 + }; + + static const u32 SNR_PH[] = + { 1, 2, 2, 2, 3, 3, 4, 5, 6, 8, + 10, 12, 15, 19, 23, 29, 37, 46, 58, 73, + 91, 115, 144, 182, 229, 288, 362, 456, 574, 722, + 909, 1144, 1440, 1813, 2282, 2873, 3617, 4553, 5732, 7216, + 9084, 11436, 14396, 18124, 22817, 28724, 36161, 45524, 57312, 72151, + 90833, 114351, 143960, 181235, 228161, 0x040000 + }; + + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + static u32 snr_db; /* index into SNR_EQ[] */ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + + /* read both equalizer and pase tracker noise data */ + i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf)); + + if (state->current_modulation == VSB_8) { + /* Equalizer Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2]; + + /* + * Look up noise value in table. + * A better search algorithm could be used... + * watch out there are duplicate entries. + */ + for (snr_db = 0; snr_db < sizeof(SNR_EQ); snr_db++) { + if (noise < SNR_EQ[snr_db]) { + *snr = 43 - snr_db; + break; + } + } + } else { + /* Phase Tracker Mean-Square Error Register for QAM */ + noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + + /* Look up noise value in table. */ + for (snr_db = 0; snr_db < sizeof(SNR_PH); snr_db++) { + if (noise < SNR_PH[snr_db]) { + *snr = 45 - snr_db; + break; + } + } + } +#else + /* Return the raw noise value */ + static u8 buf[5];/* read data buffer */ + static u32 noise; /* noise value */ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + + /* read both equalizer and pase tracker noise data */ + i2c_selectreadbytes(state, EQPH_ERR0, buf, sizeof(buf)); + + if (state->current_modulation == VSB_8) { + /* Equalizer Mean-Square Error Register for VSB */ + noise = ((buf[0] & 7) << 16) | (buf[1] << 8) | buf[2]; + } else { + /* Phase Tracker Mean-Square Error Register for QAM */ + noise = ((buf[0] & 7<<3) << 13) | (buf[3] << 8) | buf[4]; + } + + /* Small values for noise mean signal is better so invert noise */ + /* Noise is 19 bit value so discard 3 LSB*/ + *snr = ~noise>>3; +#endif + + dprintk("%s: noise = 0x%05x, snr = %idb\n",__FUNCTION__, noise, *snr); + + return 0; +} + +static int lgdt3302_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fe_tune_settings) +{ + /* I have no idea about this - it may not be needed */ + fe_tune_settings->min_delay_ms = 500; + fe_tune_settings->step_size = 0; + fe_tune_settings->max_drift = 0; + return 0; +} + +static void lgdt3302_release(struct dvb_frontend* fe) +{ + struct lgdt3302_state* state = (struct lgdt3302_state*) fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops lgdt3302_ops; + +struct dvb_frontend* lgdt3302_attach(const struct lgdt3302_config* config, + struct i2c_adapter* i2c) +{ + struct lgdt3302_state* state = NULL; + u8 buf[1]; + + /* Allocate memory for the internal state */ + state = (struct lgdt3302_state*) kmalloc(sizeof(struct lgdt3302_state), GFP_KERNEL); + if (state == NULL) + goto error; + memset(state,0,sizeof(*state)); + + /* Setup the state */ + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &lgdt3302_ops, sizeof(struct dvb_frontend_ops)); + /* Verify communication with demod chip */ + if (i2c_selectreadbytes(state, 2, buf, 1)) + goto error; + + state->current_frequency = -1; + state->current_modulation = -1; + + /* Create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + if (state) + kfree(state); + dprintk("%s: ERROR\n",__FUNCTION__); + return NULL; +} + +static struct dvb_frontend_ops lgdt3302_ops = { + .info = { + .name= "LG Electronics LGDT3302 VSB/QAM Frontend", + .type = FE_ATSC, + .frequency_min= 54000000, + .frequency_max= 858000000, + .frequency_stepsize= 62500, + /* Symbol rate is for all VSB modes need to check QAM */ + .symbol_rate_min = 10762000, + .symbol_rate_max = 10762000, + .caps = FE_CAN_QAM_64 | FE_CAN_QAM_256 | FE_CAN_8VSB + }, + .init = lgdt3302_init, + .set_frontend = lgdt3302_set_parameters, + .get_frontend = lgdt3302_get_frontend, + .get_tune_settings = lgdt3302_get_tune_settings, + .read_status = lgdt3302_read_status, + .read_ber = lgdt3302_read_ber, + .read_signal_strength = lgdt3302_read_signal_strength, + .read_snr = lgdt3302_read_snr, + .read_ucblocks = lgdt3302_read_ucblocks, + .release = lgdt3302_release, +}; + +MODULE_DESCRIPTION("LGDT3302 [DViCO FusionHDTV 3 Gold] (ATSC 8VSB & ITU-T J.83 AnnexB 64/256 QAM) Demodulator Driver"); +MODULE_AUTHOR("Wilson Michaels"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(lgdt3302_attach); + +/* + * Local variables: + * c-basic-offset: 8 + * compile-command: "make DVB=1" + * End: + */ diff --git a/drivers/media/dvb/frontends/lgdt3302.h b/drivers/media/dvb/frontends/lgdt3302.h new file mode 100644 index 000000000000..81587a40032b --- /dev/null +++ b/drivers/media/dvb/frontends/lgdt3302.h @@ -0,0 +1,49 @@ +/* + * $Id: lgdt3302.h,v 1.2 2005/06/28 23:50:48 mkrufky Exp $ + * + * Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef LGDT3302_H +#define LGDT3302_H + +#include <linux/dvb/frontend.h> + +struct lgdt3302_config +{ + /* The demodulator's i2c address */ + u8 demod_address; + u8 pll_address; + struct dvb_pll_desc *pll_desc; + + /* Need to set device param for start_dma */ + int (*set_ts_params)(struct dvb_frontend* fe, int is_punctured); +}; + +extern struct dvb_frontend* lgdt3302_attach(const struct lgdt3302_config* config, + struct i2c_adapter* i2c); + +#endif /* LGDT3302_H */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/frontends/lgdt3302_priv.h b/drivers/media/dvb/frontends/lgdt3302_priv.h new file mode 100644 index 000000000000..6193fa7a569d --- /dev/null +++ b/drivers/media/dvb/frontends/lgdt3302_priv.h @@ -0,0 +1,72 @@ +/* + * $Id: lgdt3302_priv.h,v 1.2 2005/06/28 23:50:48 mkrufky Exp $ + * + * Support for LGDT3302 (DViCO FustionHDTV 3 Gold) - VSB/QAM + * + * Copyright (C) 2005 Wilson Michaels <wilsonmichaels@earthlink.net> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#ifndef _LGDT3302_PRIV_ +#define _LGDT3302_PRIV_ + +/* i2c control register addresses */ +enum I2C_REG { + TOP_CONTROL= 0x00, + IRQ_MASK= 0x01, + IRQ_STATUS= 0x02, + VSB_CARRIER_FREQ0= 0x16, + VSB_CARRIER_FREQ1= 0x17, + VSB_CARRIER_FREQ2= 0x18, + VSB_CARRIER_FREQ3= 0x19, + CARRIER_MSEQAM1= 0x1a, + CARRIER_MSEQAM2= 0x1b, + CARRIER_LOCK= 0x1c, + TIMING_RECOVERY= 0x1d, + AGC_DELAY0= 0x2a, + AGC_DELAY1= 0x2b, + AGC_DELAY2= 0x2c, + AGC_RF_BANDWIDTH0= 0x2d, + AGC_RF_BANDWIDTH1= 0x2e, + AGC_RF_BANDWIDTH2= 0x2f, + AGC_LOOP_BANDWIDTH0= 0x30, + AGC_LOOP_BANDWIDTH1= 0x31, + AGC_FUNC_CTRL1= 0x32, + AGC_FUNC_CTRL2= 0x33, + AGC_FUNC_CTRL3= 0x34, + AGC_RFIF_ACC0= 0x39, + AGC_RFIF_ACC1= 0x3a, + AGC_RFIF_ACC2= 0x3b, + AGC_STATUS= 0x3f, + SYNC_STATUS_VSB= 0x43, + EQPH_ERR0= 0x47, + EQ_ERR1= 0x48, + EQ_ERR2= 0x49, + PH_ERR1= 0x4a, + PH_ERR2= 0x4b, + DEMUX_CONTROL= 0x66, + PACKET_ERR_COUNTER1= 0x6a, + PACKET_ERR_COUNTER2= 0x6b, +}; + +#endif /* _LGDT3302_PRIV_ */ + +/* + * Local variables: + * c-basic-offset: 8 + * End: + */ diff --git a/drivers/media/dvb/frontends/s5h1420.c b/drivers/media/dvb/frontends/s5h1420.c new file mode 100644 index 000000000000..4f396ac8de77 --- /dev/null +++ b/drivers/media/dvb/frontends/s5h1420.c @@ -0,0 +1,800 @@ +/* +Driver for Samsung S5H1420 QPSK Demodulator + +Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; if not, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/init.h> +#include <linux/string.h> +#include <linux/slab.h> +#include <linux/delay.h> + +#include "dvb_frontend.h" +#include "s5h1420.h" + + + +#define TONE_FREQ 22000 + +struct s5h1420_state { + struct i2c_adapter* i2c; + struct dvb_frontend_ops ops; + const struct s5h1420_config* config; + struct dvb_frontend frontend; + + u8 postlocked:1; + u32 fclk; + u32 tunedfreq; + fe_code_rate_t fec_inner; + u32 symbol_rate; +}; + +static u32 s5h1420_getsymbolrate(struct s5h1420_state* state); +static int s5h1420_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings); + + +static int debug = 0; +#define dprintk if (debug) printk + +static int s5h1420_writereg (struct s5h1420_state* state, u8 reg, u8 data) +{ + u8 buf [] = { reg, data }; + struct i2c_msg msg = { .addr = state->config->demod_address, .flags = 0, .buf = buf, .len = 2 }; + int err; + + if ((err = i2c_transfer (state->i2c, &msg, 1)) != 1) { + dprintk ("%s: writereg error (err == %i, reg == 0x%02x, data == 0x%02x)\n", __FUNCTION__, err, reg, data); + return -EREMOTEIO; + } + + return 0; +} + +static u8 s5h1420_readreg (struct s5h1420_state* state, u8 reg) +{ + int ret; + u8 b0 [] = { reg }; + u8 b1 [] = { 0 }; + struct i2c_msg msg1 = { .addr = state->config->demod_address, .flags = 0, .buf = b0, .len = 1 }; + struct i2c_msg msg2 = { .addr = state->config->demod_address, .flags = I2C_M_RD, .buf = b1, .len = 1 }; + + if ((ret = i2c_transfer (state->i2c, &msg1, 1)) != 1) + return ret; + + if ((ret = i2c_transfer (state->i2c, &msg2, 1)) != 1) + return ret; + + return b1[0]; +} + +static int s5h1420_set_voltage (struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + switch(voltage) { + case SEC_VOLTAGE_13: + s5h1420_writereg(state, 0x3c, (s5h1420_readreg(state, 0x3c) & 0xfe) | 0x02); + break; + + case SEC_VOLTAGE_18: + s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) | 0x03); + break; + + case SEC_VOLTAGE_OFF: + s5h1420_writereg(state, 0x3c, s5h1420_readreg(state, 0x3c) & 0xfd); + break; + } + + return 0; +} + +static int s5h1420_set_tone (struct dvb_frontend* fe, fe_sec_tone_mode_t tone) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + switch(tone) { + case SEC_TONE_ON: + s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x74) | 0x08); + break; + + case SEC_TONE_OFF: + s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x74) | 0x01); + break; + } + + return 0; +} + +static int s5h1420_send_master_cmd (struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u8 val; + int i; + unsigned long timeout; + int result = 0; + + /* setup for DISEQC */ + val = s5h1420_readreg(state, 0x3b); + s5h1420_writereg(state, 0x3b, 0x02); + msleep(15); + + /* write the DISEQC command bytes */ + for(i=0; i< cmd->msg_len; i++) { + s5h1420_writereg(state, 0x3c + i, cmd->msg[i]); + } + + /* kick off transmission */ + s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | ((cmd->msg_len-1) << 4) | 0x08); + + /* wait for transmission to complete */ + timeout = jiffies + ((100*HZ) / 1000); + while(time_before(jiffies, timeout)) { + if (s5h1420_readreg(state, 0x3b) & 0x08) + break; + + msleep(5); + } + if (time_after(jiffies, timeout)) + result = -ETIMEDOUT; + + /* restore original settings */ + s5h1420_writereg(state, 0x3b, val); + msleep(15); + return result; +} + +static int s5h1420_recv_slave_reply (struct dvb_frontend* fe, struct dvb_diseqc_slave_reply* reply) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u8 val; + int i; + int length; + unsigned long timeout; + int result = 0; + + /* setup for DISEQC recieve */ + val = s5h1420_readreg(state, 0x3b); + s5h1420_writereg(state, 0x3b, 0x82); /* FIXME: guess - do we need to set DIS_RDY(0x08) in receive mode? */ + msleep(15); + + /* wait for reception to complete */ + timeout = jiffies + ((reply->timeout*HZ) / 1000); + while(time_before(jiffies, timeout)) { + if (!(s5h1420_readreg(state, 0x3b) & 0x80)) /* FIXME: do we test DIS_RDY(0x08) or RCV_EN(0x80)? */ + break; + + msleep(5); + } + if (time_after(jiffies, timeout)) { + result = -ETIMEDOUT; + goto exit; + } + + /* check error flag - FIXME: not sure what this does - docs do not describe + * beyond "error flag for diseqc receive data :( */ + if (s5h1420_readreg(state, 0x49)) { + result = -EIO; + goto exit; + } + + /* check length */ + length = (s5h1420_readreg(state, 0x3b) & 0x70) >> 4; + if (length > sizeof(reply->msg)) { + result = -EOVERFLOW; + goto exit; + } + reply->msg_len = length; + + /* extract data */ + for(i=0; i< length; i++) { + reply->msg[i] = s5h1420_readreg(state, 0x3c + i); + } + +exit: + /* restore original settings */ + s5h1420_writereg(state, 0x3b, val); + msleep(15); + return result; +} + +static int s5h1420_send_burst (struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u8 val; + int result = 0; + unsigned long timeout; + + /* setup for tone burst */ + val = s5h1420_readreg(state, 0x3b); + s5h1420_writereg(state, 0x3b, (s5h1420_readreg(state, 0x3b) & 0x70) | 0x01); + + /* set value for B position if requested */ + if (minicmd == SEC_MINI_B) { + s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x04); + } + msleep(15); + + /* start transmission */ + s5h1420_writereg(state, 0x3b, s5h1420_readreg(state, 0x3b) | 0x08); + + /* wait for transmission to complete */ + timeout = jiffies + ((20*HZ) / 1000); + while(time_before(jiffies, timeout)) { + if (!(s5h1420_readreg(state, 0x3b) & 0x08)) + break; + + msleep(5); + } + if (time_after(jiffies, timeout)) + result = -ETIMEDOUT; + + /* restore original settings */ + s5h1420_writereg(state, 0x3b, val); + msleep(15); + return result; +} + +static fe_status_t s5h1420_get_status_bits(struct s5h1420_state* state) +{ + u8 val; + fe_status_t status = 0; + + val = s5h1420_readreg(state, 0x14); + if (val & 0x02) + status |= FE_HAS_SIGNAL; // FIXME: not sure if this is right + if (val & 0x01) + status |= FE_HAS_CARRIER; // FIXME: not sure if this is right + val = s5h1420_readreg(state, 0x36); + if (val & 0x01) + status |= FE_HAS_VITERBI; + if (val & 0x20) + status |= FE_HAS_SYNC; + if (status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI|FE_HAS_SYNC)) + status |= FE_HAS_LOCK; + + return status; +} + +static int s5h1420_read_status(struct dvb_frontend* fe, fe_status_t* status) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u8 val; + + if (status == NULL) + return -EINVAL; + + /* determine lock state */ + *status = s5h1420_get_status_bits(state); + + /* fix for FEC 5/6 inversion issue - if it doesn't quite lock, invert the inversion, + wait a bit and check again */ + if (*status == (FE_HAS_SIGNAL|FE_HAS_CARRIER|FE_HAS_VITERBI)) { + val = s5h1420_readreg(state, 0x32); + if ((val & 0x07) == 0x03) { + if (val & 0x08) + s5h1420_writereg(state, 0x31, 0x13); + else + s5h1420_writereg(state, 0x31, 0x1b); + + /* wait a bit then update lock status */ + mdelay(200); + *status = s5h1420_get_status_bits(state); + } + } + + /* perform post lock setup */ + if ((*status & FE_HAS_LOCK) && (!state->postlocked)) { + + /* calculate the data rate */ + u32 tmp = s5h1420_getsymbolrate(state); + switch(s5h1420_readreg(state, 0x32) & 0x07) { + case 0: + tmp = (tmp * 2 * 1) / 2; + break; + + case 1: + tmp = (tmp * 2 * 2) / 3; + break; + + case 2: + tmp = (tmp * 2 * 3) / 4; + break; + + case 3: + tmp = (tmp * 2 * 5) / 6; + break; + + case 4: + tmp = (tmp * 2 * 6) / 7; + break; + + case 5: + tmp = (tmp * 2 * 7) / 8; + break; + } + tmp = state->fclk / tmp; + + /* set the MPEG_CLK_INTL for the calculated data rate */ + if (tmp < 4) + val = 0x00; + else if (tmp < 8) + val = 0x01; + else if (tmp < 12) + val = 0x02; + else if (tmp < 16) + val = 0x03; + else if (tmp < 24) + val = 0x04; + else if (tmp < 32) + val = 0x05; + else + val = 0x06; + s5h1420_writereg(state, 0x22, val); + + /* DC freeze */ + s5h1420_writereg(state, 0x1f, s5h1420_readreg(state, 0x1f) | 0x01); + + /* kicker disable + remove DC offset */ + s5h1420_writereg(state, 0x05, s5h1420_readreg(state, 0x05) & 0x6f); + + /* post-lock processing has been done! */ + state->postlocked = 1; + } + + return 0; +} + +static int s5h1420_read_ber(struct dvb_frontend* fe, u32* ber) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + s5h1420_writereg(state, 0x46, 0x1d); + mdelay(25); + return (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47); +} + +static int s5h1420_read_signal_strength(struct dvb_frontend* fe, u16* strength) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + u8 val = 0xff - s5h1420_readreg(state, 0x15); + + return (int) ((val << 8) | val); +} + +static int s5h1420_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + s5h1420_writereg(state, 0x46, 0x1f); + mdelay(25); + return (s5h1420_readreg(state, 0x48) << 8) | s5h1420_readreg(state, 0x47); +} + +static void s5h1420_reset(struct s5h1420_state* state) +{ + s5h1420_writereg (state, 0x01, 0x08); + s5h1420_writereg (state, 0x01, 0x00); + udelay(10); +} + +static void s5h1420_setsymbolrate(struct s5h1420_state* state, struct dvb_frontend_parameters *p) +{ + u64 val; + + val = (p->u.qpsk.symbol_rate / 1000) * (1<<24); + if (p->u.qpsk.symbol_rate <= 21000000) { + val *= 2; + } + do_div(val, (state->fclk / 1000)); + + s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) & 0x7f); + s5h1420_writereg(state, 0x11, val >> 16); + s5h1420_writereg(state, 0x12, val >> 8); + s5h1420_writereg(state, 0x13, val & 0xff); + s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) | 0x80); +} + +static u32 s5h1420_getsymbolrate(struct s5h1420_state* state) +{ + u64 val; + int sampling = 2; + + if (s5h1420_readreg(state, 0x05) & 0x2) + sampling = 1; + + s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08); + val = s5h1420_readreg(state, 0x11) << 16; + val |= s5h1420_readreg(state, 0x12) << 8; + val |= s5h1420_readreg(state, 0x13); + s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7); + + val *= (state->fclk / 1000); + do_div(val, ((1<<24) * sampling)); + + return (u32) (val * 1000); +} + +static void s5h1420_setfreqoffset(struct s5h1420_state* state, int freqoffset) +{ + int val; + + /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so + * divide fclk by 1000000 to get the correct value. */ + val = -(int) ((freqoffset * (1<<24)) / (state->fclk / 1000000)); + + s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) & 0xbf); + s5h1420_writereg(state, 0x0e, val >> 16); + s5h1420_writereg(state, 0x0f, val >> 8); + s5h1420_writereg(state, 0x10, val & 0xff); + s5h1420_writereg(state, 0x09, s5h1420_readreg(state, 0x09) | 0x40); +} + +static int s5h1420_getfreqoffset(struct s5h1420_state* state) +{ + int val; + + s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) | 0x08); + val = s5h1420_readreg(state, 0x0e) << 16; + val |= s5h1420_readreg(state, 0x0f) << 8; + val |= s5h1420_readreg(state, 0x10); + s5h1420_writereg(state, 0x06, s5h1420_readreg(state, 0x06) & 0xf7); + + if (val & 0x800000) + val |= 0xff000000; + + /* remember freqoffset is in kHz, but the chip wants the offset in Hz, so + * divide fclk by 1000000 to get the correct value. */ + val = - ((val * (state->fclk/1000000)) / (1<<24)); + + return val; +} + +static void s5h1420_setfec(struct s5h1420_state* state, struct dvb_frontend_parameters *p) +{ + if ((p->u.qpsk.fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) { + s5h1420_writereg(state, 0x31, 0x00); + s5h1420_writereg(state, 0x30, 0x3f); + } else { + switch(p->u.qpsk.fec_inner) { + case FEC_1_2: + s5h1420_writereg(state, 0x31, 0x10); + s5h1420_writereg(state, 0x30, 0x01); + break; + + case FEC_2_3: + s5h1420_writereg(state, 0x31, 0x11); + s5h1420_writereg(state, 0x30, 0x02); + break; + + case FEC_3_4: + s5h1420_writereg(state, 0x31, 0x12); + s5h1420_writereg(state, 0x30, 0x04); + break; + + case FEC_5_6: + s5h1420_writereg(state, 0x31, 0x13); + s5h1420_writereg(state, 0x30, 0x08); + break; + + case FEC_6_7: + s5h1420_writereg(state, 0x31, 0x14); + s5h1420_writereg(state, 0x30, 0x10); + break; + + case FEC_7_8: + s5h1420_writereg(state, 0x31, 0x15); + s5h1420_writereg(state, 0x30, 0x20); + break; + + default: + return; + } + } +} + +static fe_code_rate_t s5h1420_getfec(struct s5h1420_state* state) +{ + switch(s5h1420_readreg(state, 0x32) & 0x07) { + case 0: + return FEC_1_2; + + case 1: + return FEC_2_3; + + case 2: + return FEC_3_4; + + case 3: + return FEC_5_6; + + case 4: + return FEC_6_7; + + case 5: + return FEC_7_8; + } + + return FEC_NONE; +} + +static void s5h1420_setinversion(struct s5h1420_state* state, struct dvb_frontend_parameters *p) +{ + if ((p->u.qpsk.fec_inner == FEC_AUTO) || (p->inversion == INVERSION_AUTO)) { + s5h1420_writereg(state, 0x31, 0x00); + s5h1420_writereg(state, 0x30, 0x3f); + } else { + u8 tmp = s5h1420_readreg(state, 0x31) & 0xf7; + tmp |= 0x10; + + if (p->inversion == INVERSION_ON) + tmp |= 0x80; + + s5h1420_writereg(state, 0x31, tmp); + } +} + +static fe_spectral_inversion_t s5h1420_getinversion(struct s5h1420_state* state) +{ + if (s5h1420_readreg(state, 0x32) & 0x08) + return INVERSION_ON; + + return INVERSION_OFF; +} + +static int s5h1420_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +{ + struct s5h1420_state* state = fe->demodulator_priv; + u32 frequency_delta; + struct dvb_frontend_tune_settings fesettings; + + /* check if we should do a fast-tune */ + memcpy(&fesettings.parameters, p, sizeof(struct dvb_frontend_parameters)); + s5h1420_get_tune_settings(fe, &fesettings); + frequency_delta = p->frequency - state->tunedfreq; + if ((frequency_delta > -fesettings.max_drift) && (frequency_delta < fesettings.max_drift) && + (frequency_delta != 0) && + (state->fec_inner == p->u.qpsk.fec_inner) && + (state->symbol_rate == p->u.qpsk.symbol_rate)) { + + s5h1420_setfreqoffset(state, frequency_delta); + return 0; + } + + /* first of all, software reset */ + s5h1420_reset(state); + + /* set tuner PLL */ + if (state->config->pll_set) { + s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) | 1); + state->config->pll_set(fe, p, &state->tunedfreq); + s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) & 0xfe); + } + + /* set s5h1420 fclk PLL according to desired symbol rate */ + if (p->u.qpsk.symbol_rate > 28000000) { + state->fclk = 88000000; + s5h1420_writereg(state, 0x03, 0x50); + s5h1420_writereg(state, 0x04, 0x40); + s5h1420_writereg(state, 0x05, 0xae); + } else if (p->u.qpsk.symbol_rate > 21000000) { + state->fclk = 59000000; + s5h1420_writereg(state, 0x03, 0x33); + s5h1420_writereg(state, 0x04, 0x40); + s5h1420_writereg(state, 0x05, 0xae); + } else { + state->fclk = 88000000; + s5h1420_writereg(state, 0x03, 0x50); + s5h1420_writereg(state, 0x04, 0x40); + s5h1420_writereg(state, 0x05, 0xac); + } + + /* set misc registers */ + s5h1420_writereg(state, 0x02, 0x00); + s5h1420_writereg(state, 0x07, 0xb0); + s5h1420_writereg(state, 0x0a, 0x67); + s5h1420_writereg(state, 0x0b, 0x78); + s5h1420_writereg(state, 0x0c, 0x48); + s5h1420_writereg(state, 0x0d, 0x6b); + s5h1420_writereg(state, 0x2e, 0x8e); + s5h1420_writereg(state, 0x35, 0x33); + s5h1420_writereg(state, 0x38, 0x01); + s5h1420_writereg(state, 0x39, 0x7d); + s5h1420_writereg(state, 0x3a, (state->fclk + (TONE_FREQ * 32) - 1) / (TONE_FREQ * 32)); + s5h1420_writereg(state, 0x3c, 0x00); + s5h1420_writereg(state, 0x45, 0x61); + s5h1420_writereg(state, 0x46, 0x1d); + + /* start QPSK */ + s5h1420_writereg(state, 0x05, s5h1420_readreg(state, 0x05) | 1); + + /* set the frequency offset to adjust for PLL inaccuracy */ + s5h1420_setfreqoffset(state, p->frequency - state->tunedfreq); + + /* set the reset of the parameters */ + s5h1420_setsymbolrate(state, p); + s5h1420_setinversion(state, p); + s5h1420_setfec(state, p); + + state->fec_inner = p->u.qpsk.fec_inner; + state->symbol_rate = p->u.qpsk.symbol_rate; + state->postlocked = 0; + return 0; +} + +static int s5h1420_get_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters *p) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + p->frequency = state->tunedfreq + s5h1420_getfreqoffset(state); + p->inversion = s5h1420_getinversion(state); + p->u.qpsk.symbol_rate = s5h1420_getsymbolrate(state); + p->u.qpsk.fec_inner = s5h1420_getfec(state); + + return 0; +} + +static int s5h1420_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) +{ + if (fesettings->parameters.u.qpsk.symbol_rate > 20000000) { + fesettings->min_delay_ms = 50; + fesettings->step_size = 2000; + fesettings->max_drift = 8000; + } else if (fesettings->parameters.u.qpsk.symbol_rate > 12000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 1500; + fesettings->max_drift = 9000; + } else if (fesettings->parameters.u.qpsk.symbol_rate > 8000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 1000; + fesettings->max_drift = 8000; + } else if (fesettings->parameters.u.qpsk.symbol_rate > 4000000) { + fesettings->min_delay_ms = 100; + fesettings->step_size = 500; + fesettings->max_drift = 7000; + } else if (fesettings->parameters.u.qpsk.symbol_rate > 2000000) { + fesettings->min_delay_ms = 200; + fesettings->step_size = (fesettings->parameters.u.qpsk.symbol_rate / 8000); + fesettings->max_drift = 14 * fesettings->step_size; + } else { + fesettings->min_delay_ms = 200; + fesettings->step_size = (fesettings->parameters.u.qpsk.symbol_rate / 8000); + fesettings->max_drift = 18 * fesettings->step_size; + } + + return 0; +} + +static int s5h1420_init (struct dvb_frontend* fe) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + /* disable power down and do reset */ + s5h1420_writereg(state, 0x02, 0x10); + msleep(10); + s5h1420_reset(state); + + /* init PLL */ + if (state->config->pll_init) { + s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) | 1); + state->config->pll_init(fe); + s5h1420_writereg (state, 0x02, s5h1420_readreg(state,0x02) & 0xfe); + } + + return 0; +} + +static int s5h1420_sleep(struct dvb_frontend* fe) +{ + struct s5h1420_state* state = fe->demodulator_priv; + + return s5h1420_writereg(state, 0x02, 0x12); +} + +static void s5h1420_release(struct dvb_frontend* fe) +{ + struct s5h1420_state* state = fe->demodulator_priv; + kfree(state); +} + +static struct dvb_frontend_ops s5h1420_ops; + +struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, struct i2c_adapter* i2c) +{ + struct s5h1420_state* state = NULL; + u8 identity; + + /* allocate memory for the internal state */ + state = kmalloc(sizeof(struct s5h1420_state), GFP_KERNEL); + if (state == NULL) + goto error; + + /* setup the state */ + state->config = config; + state->i2c = i2c; + memcpy(&state->ops, &s5h1420_ops, sizeof(struct dvb_frontend_ops)); + state->postlocked = 0; + state->fclk = 88000000; + state->tunedfreq = 0; + state->fec_inner = FEC_NONE; + state->symbol_rate = 0; + + /* check if the demod is there + identify it */ + identity = s5h1420_readreg(state, 0x00); + if (identity != 0x03) + goto error; + + /* create dvb_frontend */ + state->frontend.ops = &state->ops; + state->frontend.demodulator_priv = state; + return &state->frontend; + +error: + kfree(state); + return NULL; +} + +static struct dvb_frontend_ops s5h1420_ops = { + + .info = { + .name = "Samsung S5H1420 DVB-S", + .type = FE_QPSK, + .frequency_min = 950000, + .frequency_max = 2150000, + .frequency_stepsize = 125, /* kHz for QPSK frontends */ + .frequency_tolerance = 29500, + .symbol_rate_min = 1000000, + .symbol_rate_max = 45000000, + /* .symbol_rate_tolerance = ???,*/ + .caps = FE_CAN_INVERSION_AUTO | + FE_CAN_FEC_1_2 | FE_CAN_FEC_2_3 | FE_CAN_FEC_3_4 | + FE_CAN_FEC_5_6 | FE_CAN_FEC_6_7 | FE_CAN_FEC_7_8 | FE_CAN_FEC_AUTO | + FE_CAN_QPSK + }, + + .release = s5h1420_release, + + .init = s5h1420_init, + .sleep = s5h1420_sleep, + + .set_frontend = s5h1420_set_frontend, + .get_frontend = s5h1420_get_frontend, + .get_tune_settings = s5h1420_get_tune_settings, + + .read_status = s5h1420_read_status, + .read_ber = s5h1420_read_ber, + .read_signal_strength = s5h1420_read_signal_strength, + .read_ucblocks = s5h1420_read_ucblocks, + + .diseqc_send_master_cmd = s5h1420_send_master_cmd, + .diseqc_recv_slave_reply = s5h1420_recv_slave_reply, + .diseqc_send_burst = s5h1420_send_burst, + .set_tone = s5h1420_set_tone, + .set_voltage = s5h1420_set_voltage, +}; + +module_param(debug, int, 0644); + +MODULE_DESCRIPTION("Samsung S5H1420 DVB-S Demodulator driver"); +MODULE_AUTHOR("Andrew de Quincey"); +MODULE_LICENSE("GPL"); + +EXPORT_SYMBOL(s5h1420_attach); diff --git a/drivers/media/dvb/frontends/s5h1420.h b/drivers/media/dvb/frontends/s5h1420.h new file mode 100644 index 000000000000..b687fc77ceb3 --- /dev/null +++ b/drivers/media/dvb/frontends/s5h1420.h @@ -0,0 +1,41 @@ +/* + Driver for S5H1420 QPSK Demodulators + + Copyright (C) 2005 Andrew de Quincey <adq_dvb@lidskialf.net> + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ + +#ifndef S5H1420_H +#define S5H1420_H + +#include <linux/dvb/frontend.h> + +struct s5h1420_config +{ + /* the demodulator's i2c address */ + u8 demod_address; + + /* PLL maintenance */ + int (*pll_init)(struct dvb_frontend* fe); + int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u32* freqout); +}; + +extern struct dvb_frontend* s5h1420_attach(const struct s5h1420_config* config, + struct i2c_adapter* i2c); + +#endif // S5H1420_H diff --git a/drivers/media/dvb/frontends/stv0297.c b/drivers/media/dvb/frontends/stv0297.c index e681263bf079..928aca052afe 100644 --- a/drivers/media/dvb/frontends/stv0297.c +++ b/drivers/media/dvb/frontends/stv0297.c @@ -617,7 +617,7 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par /* wait for WGAGC lock */ starttime = jiffies; - timeout = jiffies + (200 * HZ) / 1000; + timeout = jiffies + msecs_to_jiffies(2000); while (time_before(jiffies, timeout)) { msleep(10); if (stv0297_readreg(state, 0x43) & 0x08) @@ -629,7 +629,7 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par msleep(20); /* wait for equaliser partial convergence */ - timeout = jiffies + (50 * HZ) / 1000; + timeout = jiffies + msecs_to_jiffies(500); while (time_before(jiffies, timeout)) { msleep(10); @@ -642,7 +642,7 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par } /* wait for equaliser full convergence */ - timeout = jiffies + (delay * HZ) / 1000; + timeout = jiffies + msecs_to_jiffies(delay); while (time_before(jiffies, timeout)) { msleep(10); @@ -659,7 +659,7 @@ static int stv0297_set_frontend(struct dvb_frontend *fe, struct dvb_frontend_par stv0297_writereg_mask(state, 0x88, 8, 0); /* wait for main lock */ - timeout = jiffies + (20 * HZ) / 1000; + timeout = jiffies + msecs_to_jiffies(20); while (time_before(jiffies, timeout)) { msleep(10); diff --git a/drivers/media/dvb/frontends/tda1004x.c b/drivers/media/dvb/frontends/tda1004x.c index 0beb370792ae..ab0c032472cc 100644 --- a/drivers/media/dvb/frontends/tda1004x.c +++ b/drivers/media/dvb/frontends/tda1004x.c @@ -49,10 +49,8 @@ struct tda1004x_state { /* private demod data */ u8 initialised; enum tda1004x_demod demod_type; - u8 fw_version; }; - static int debug; #define dprintk(args...) \ do { \ @@ -122,6 +120,8 @@ static int debug; #define TDA10046H_GPIO_OUT_SEL 0x41 #define TDA10046H_GPIO_SELECT 0x42 #define TDA10046H_AGC_CONF 0x43 +#define TDA10046H_AGC_THR 0x44 +#define TDA10046H_AGC_RENORM 0x45 #define TDA10046H_AGC_GAINS 0x46 #define TDA10046H_AGC_TUN_MIN 0x47 #define TDA10046H_AGC_TUN_MAX 0x48 @@ -274,14 +274,26 @@ static int tda10046h_set_bandwidth(struct tda1004x_state *state, switch (bandwidth) { case BANDWIDTH_6_MHZ: tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_6mhz, sizeof(bandwidth_6mhz)); + if (state->config->if_freq == TDA10046_FREQ_045) { + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x09); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x4f); + } break; case BANDWIDTH_7_MHZ: tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_7mhz, sizeof(bandwidth_7mhz)); + if (state->config->if_freq == TDA10046_FREQ_045) { + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0a); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x79); + } break; case BANDWIDTH_8_MHZ: tda1004x_write_buf(state, TDA10046H_TIME_WREF1, bandwidth_8mhz, sizeof(bandwidth_8mhz)); + if (state->config->if_freq == TDA10046_FREQ_045) { + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0b); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xa3); + } break; default: @@ -315,20 +327,35 @@ static int tda1004x_do_upload(struct tda1004x_state *state, memcpy(buf + 1, mem + pos, tx_size); fw_msg.len = tx_size + 1; if (i2c_transfer(state->i2c, &fw_msg, 1) != 1) { - printk("tda1004x: Error during firmware upload\n"); + printk(KERN_ERR "tda1004x: Error during firmware upload\n"); return -EIO; } pos += tx_size; dprintk("%s: fw_pos=0x%x\n", __FUNCTION__, pos); } + // give the DSP a chance to settle 03/10/05 Hac + msleep(100); return 0; } -static int tda1004x_check_upload_ok(struct tda1004x_state *state, u8 dspVersion) +static int tda1004x_check_upload_ok(struct tda1004x_state *state) { u8 data1, data2; + unsigned long timeout; + + if (state->demod_type == TDA1004X_DEMOD_TDA10046) { + timeout = jiffies + 2 * HZ; + while(!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) { + if (time_after(jiffies, timeout)) { + printk(KERN_ERR "tda1004x: timeout waiting for DSP ready\n"); + break; + } + msleep(1); + } + } else + msleep(100); // check upload was OK tda1004x_write_mask(state, TDA1004X_CONFC4, 0x10, 0); // we want to read from the DSP @@ -336,9 +363,11 @@ static int tda1004x_check_upload_ok(struct tda1004x_state *state, u8 dspVersion) data1 = tda1004x_read_byte(state, TDA1004X_DSP_DATA1); data2 = tda1004x_read_byte(state, TDA1004X_DSP_DATA2); - if ((data1 != 0x67) || (data2 != dspVersion)) + if (data1 != 0x67 || data2 < 0x20 || data2 > 0x2e) { + printk(KERN_INFO "tda1004x: found firmware revision %x -- invalid\n", data2); return -EIO; - + } + printk(KERN_INFO "tda1004x: found firmware revision %x -- ok\n", data2); return 0; } @@ -349,14 +378,14 @@ static int tda10045_fwupload(struct dvb_frontend* fe) const struct firmware *fw; /* don't re-upload unless necessary */ - if (tda1004x_check_upload_ok(state, 0x2c) == 0) + if (tda1004x_check_upload_ok(state) == 0) return 0; /* request the firmware, this will block until someone uploads it */ - printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); + printk(KERN_INFO "tda1004x: waiting for firmware upload (%s)...\n", TDA10045_DEFAULT_FIRMWARE); ret = state->config->request_firmware(fe, &fw, TDA10045_DEFAULT_FIRMWARE); if (ret) { - printk("tda1004x: no firmware upload (timeout or file not found?)\n"); + printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); return ret; } @@ -370,95 +399,93 @@ static int tda10045_fwupload(struct dvb_frontend* fe) tda10045h_set_bandwidth(state, BANDWIDTH_8_MHZ); ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10045H_FWPAGE, TDA10045H_CODE_IN); + release_firmware(fw); if (ret) return ret; - printk("tda1004x: firmware upload complete\n"); + printk(KERN_INFO "tda1004x: firmware upload complete\n"); /* wait for DSP to initialise */ /* DSPREADY doesn't seem to work on the TDA10045H */ msleep(100); - return tda1004x_check_upload_ok(state, 0x2c); + return tda1004x_check_upload_ok(state); } -static int tda10046_get_fw_version(struct tda1004x_state *state, - const struct firmware *fw) +static void tda10046_init_plls(struct dvb_frontend* fe) { - const unsigned char pattern[] = { 0x67, 0x00, 0x50, 0x62, 0x5e, 0x18, 0x67 }; - unsigned int i; - - /* area guessed from firmware v20, v21 and v25 */ - for (i = 0x660; i < 0x700; i++) { - if (!memcmp(&fw->data[i], pattern, sizeof(pattern))) { - state->fw_version = fw->data[i + sizeof(pattern)]; - printk(KERN_INFO "tda1004x: using firmware v%02x\n", - state->fw_version); - return 0; - } - } + struct tda1004x_state* state = fe->demodulator_priv; - return -EINVAL; + tda1004x_write_byteI(state, TDA10046H_CONFPLL1, 0xf0); + tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10 + if (state->config->xtal_freq == TDA10046_XTAL_4M ) { + dprintk("%s: setting up PLLs for a 4 MHz Xtal\n", __FUNCTION__); + tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 0); // PLL P = N = 0 + } else { + dprintk("%s: setting up PLLs for a 16 MHz Xtal\n", __FUNCTION__); + tda1004x_write_byteI(state, TDA10046H_CONFPLL3, 3); // PLL P = 0, N = 3 + } + tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); + switch (state->config->if_freq) { + case TDA10046_FREQ_3617: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); + break; + case TDA10046_FREQ_3613: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x13); + break; + case TDA10046_FREQ_045: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0b); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0xa3); + break; + case TDA10046_FREQ_052: + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0x0c); + tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x06); + break; + } + tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz } static int tda10046_fwupload(struct dvb_frontend* fe) { struct tda1004x_state* state = fe->demodulator_priv; - unsigned long timeout; int ret; const struct firmware *fw; /* reset + wake up chip */ - tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 0); + tda1004x_write_byteI(state, TDA1004X_CONFC4, 0); tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 1, 0); - msleep(100); + /* let the clocks recover from sleep */ + msleep(5); /* don't re-upload unless necessary */ - if (tda1004x_check_upload_ok(state, state->fw_version) == 0) + if (tda1004x_check_upload_ok(state) == 0) return 0; - /* request the firmware, this will block until someone uploads it */ - printk("tda1004x: waiting for firmware upload (%s)...\n", TDA10046_DEFAULT_FIRMWARE); - ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE); - if (ret) { - printk("tda1004x: no firmware upload (timeout or file not found?)\n"); - return ret; - } - - if (fw->size < 24478) { /* size of firmware v20, which is the smallest of v20, v21 and v25 */ - printk("tda1004x: firmware file seems to be too small (%d bytes)\n", fw->size); - return -EINVAL; - } - - ret = tda10046_get_fw_version(state, fw); - if (ret < 0) { - printk("tda1004x: unable to find firmware version\n"); - return ret; - } - /* set parameters */ - tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); - tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); - tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); - tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); - tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); - tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST - - ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN); - if (ret) - return ret; - printk("tda1004x: firmware upload complete\n"); - - /* wait for DSP to initialise */ - timeout = jiffies + HZ; - while (!(tda1004x_read_byte(state, TDA1004X_STATUS_CD) & 0x20)) { - if (time_after(jiffies, timeout)) { - printk("tda1004x: DSP failed to initialised.\n"); - return -EIO; + tda10046_init_plls(fe); + + if (state->config->request_firmware != NULL) { + /* request the firmware, this will block until someone uploads it */ + printk(KERN_INFO "tda1004x: waiting for firmware upload...\n"); + ret = state->config->request_firmware(fe, &fw, TDA10046_DEFAULT_FIRMWARE); + if (ret) { + printk(KERN_ERR "tda1004x: no firmware upload (timeout or file not found?)\n"); + return ret; } - msleep(1); + tda1004x_write_mask(state, TDA1004X_CONFC4, 8, 8); // going to boot from HOST + ret = tda1004x_do_upload(state, fw->data, fw->size, TDA10046H_CODE_CPT, TDA10046H_CODE_IN); + release_firmware(fw); + if (ret) + return ret; + } else { + /* boot from firmware eeprom */ + /* Hac Note: we might need to do some GPIO Magic here */ + printk(KERN_INFO "tda1004x: booting from eeprom\n"); + tda1004x_write_mask(state, TDA1004X_CONFC4, 4, 4); + msleep(300); } - - return tda1004x_check_upload_ok(state, state->fw_version); + return tda1004x_check_upload_ok(state); } static int tda1004x_encode_fec(int fec) @@ -560,12 +587,10 @@ static int tda10046_init(struct dvb_frontend* fe) if (tda10046_fwupload(fe)) { printk("tda1004x: firmware upload failed\n"); - return -EIO; + return -EIO; } - tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 0); // wake up the chip - - // Init the PLL + // Init the tuner PLL if (state->config->pll_init) { tda1004x_enable_tuner_i2c(state); state->config->pll_init(fe); @@ -574,32 +599,44 @@ static int tda10046_init(struct dvb_frontend* fe) // tda setup tda1004x_write_mask(state, TDA1004X_CONFC4, 0x20, 0); // disable DSP watchdog timer - tda1004x_write_mask(state, TDA1004X_CONFC1, 0x40, 0x40); - tda1004x_write_mask(state, TDA1004X_AUTO, 8, 0); // select HP stream - tda1004x_write_mask(state, TDA1004X_CONFC1, 0x80, 0); // disable pulse killer - tda1004x_write_byteI(state, TDA10046H_CONFPLL2, 10); // PLL M = 10 - tda1004x_write_byteI(state, TDA10046H_CONFPLL3, state->config->n_i2c); // PLL P = N = 0 - tda1004x_write_byteI(state, TDA10046H_FREQ_OFFSET, 99); // FREQOFFS = 99 - tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_MSB, 0xd4); // } PHY2 = -11221 - tda1004x_write_byteI(state, TDA10046H_FREQ_PHY2_LSB, 0x2c); // } - tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0); // AGC setup - tda1004x_write_mask(state, TDA10046H_CONF_POLARITY, 0x60, 0x60); // set AGC polarities + tda1004x_write_byteI(state, TDA1004X_AUTO, 7); // select HP stream + tda1004x_write_byteI(state, TDA1004X_CONFC1, 8); // disable pulse killer + + tda10046_init_plls(fe); + switch (state->config->agc_config) { + case TDA10046_AGC_DEFAULT: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x00); // AGC setup + tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities + break; + case TDA10046_AGC_IFO_AUTO_NEG: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup + tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities + break; + case TDA10046_AGC_IFO_AUTO_POS: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x0a); // AGC setup + tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x00); // set AGC polarities + break; + case TDA10046_AGC_TDA827X: + tda1004x_write_byteI(state, TDA10046H_AGC_CONF, 0x02); // AGC setup + tda1004x_write_byteI(state, TDA10046H_AGC_THR, 0x70); // AGC Threshold + tda1004x_write_byteI(state, TDA10046H_AGC_RENORM, 0x0E); // Gain Renormalize + tda1004x_write_byteI(state, TDA10046H_CONF_POLARITY, 0x60); // set AGC polarities + break; + } + tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE1, 0x61); // Turn both AGC outputs on tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MIN, 0); // } tda1004x_write_byteI(state, TDA10046H_AGC_TUN_MAX, 0xff); // } AGC min/max values tda1004x_write_byteI(state, TDA10046H_AGC_IF_MIN, 0); // } tda1004x_write_byteI(state, TDA10046H_AGC_IF_MAX, 0xff); // } - tda1004x_write_mask(state, TDA10046H_CVBER_CTRL, 0x30, 0x10); // 10^6 VBER measurement bits tda1004x_write_byteI(state, TDA10046H_AGC_GAINS, 1); // IF gain 2, TUN gain 1 - tda1004x_write_mask(state, TDA1004X_AUTO, 0x80, 0); // crystal is 50ppm + tda1004x_write_byteI(state, TDA10046H_CVBER_CTRL, 0x1a); // 10^6 VBER measurement bits tda1004x_write_byteI(state, TDA1004X_CONF_TS1, 7); // MPEG2 interface config - tda1004x_write_mask(state, TDA1004X_CONF_TS2, 0x31, 0); // MPEG2 interface config - tda1004x_write_mask(state, TDA10046H_CONF_TRISTATE1, 0x9e, 0); // disable AGC_TUN + tda1004x_write_byteI(state, TDA1004X_CONF_TS2, 0xc0); // MPEG2 interface config + tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7); + tda1004x_write_byteI(state, TDA10046H_CONF_TRISTATE2, 0xe1); // tristate setup tda1004x_write_byteI(state, TDA10046H_GPIO_OUT_SEL, 0xcc); // GPIO output config - tda1004x_write_mask(state, TDA10046H_GPIO_SELECT, 8, 8); // GPIO select - tda10046h_set_bandwidth(state, BANDWIDTH_8_MHZ); // default bandwidth 8 MHz - - tda1004x_write_mask(state, 0x3a, 0x80, state->config->invert_oclk << 7); + tda1004x_write_byteI(state, TDA10046H_GPIO_SELECT, 8); // GPIO select state->initialised = 1; return 0; @@ -629,9 +666,6 @@ static int tda1004x_set_fe(struct dvb_frontend* fe, state->config->pll_set(fe, fe_params); tda1004x_disable_tuner_i2c(state); - if (state->demod_type == TDA1004X_DEMOD_TDA10046) - tda1004x_write_mask(state, TDA10046H_AGC_CONF, 4, 4); - // Hardcoded to use auto as much as possible on the TDA10045 as it // is very unreliable if AUTO mode is _not_ used. if (state->demod_type == TDA1004X_DEMOD_TDA10045) { @@ -1089,6 +1123,11 @@ static int tda1004x_sleep(struct dvb_frontend* fe) break; case TDA1004X_DEMOD_TDA10046: + if (state->config->pll_sleep != NULL) { + tda1004x_enable_tuner_i2c(state); + state->config->pll_sleep(fe); + tda1004x_disable_tuner_i2c(state); + } tda1004x_write_mask(state, TDA1004X_CONFC4, 1, 1); break; } @@ -1100,8 +1139,9 @@ static int tda1004x_sleep(struct dvb_frontend* fe) static int tda1004x_get_tune_settings(struct dvb_frontend* fe, struct dvb_frontend_tune_settings* fesettings) { fesettings->min_delay_ms = 800; - fesettings->step_size = 166667; - fesettings->max_drift = 166667*2; + /* Drift compensation makes no sense for DVB-T */ + fesettings->step_size = 0; + fesettings->max_drift = 0; return 0; } @@ -1216,7 +1256,6 @@ struct dvb_frontend* tda10046_attach(const struct tda1004x_config* config, memcpy(&state->ops, &tda10046_ops, sizeof(struct dvb_frontend_ops)); state->initialised = 0; state->demod_type = TDA1004X_DEMOD_TDA10046; - state->fw_version = 0x20; /* dummy default value */ /* check if the demod is there */ if (tda1004x_read_byte(state, TDA1004X_CHIPID) != 0x46) { diff --git a/drivers/media/dvb/frontends/tda1004x.h b/drivers/media/dvb/frontends/tda1004x.h index c8e1d54ff262..8659c52647ad 100644 --- a/drivers/media/dvb/frontends/tda1004x.h +++ b/drivers/media/dvb/frontends/tda1004x.h @@ -26,6 +26,25 @@ #include <linux/dvb/frontend.h> #include <linux/firmware.h> +enum tda10046_xtal { + TDA10046_XTAL_4M, + TDA10046_XTAL_16M, +}; + +enum tda10046_agc { + TDA10046_AGC_DEFAULT, /* original configuration */ + TDA10046_AGC_IFO_AUTO_NEG, /* IF AGC only, automatic, negtive */ + TDA10046_AGC_IFO_AUTO_POS, /* IF AGC only, automatic, positive */ + TDA10046_AGC_TDA827X, /* IF AGC only, special setup for tda827x */ +}; + +enum tda10046_if { + TDA10046_FREQ_3617, /* original config, 36,166 MHZ */ + TDA10046_FREQ_3613, /* 36,13 MHZ */ + TDA10046_FREQ_045, /* low IF, 4.0, 4.5, or 5.0 MHZ */ + TDA10046_FREQ_052, /* low IF, 5.1667 MHZ for tda9889 */ +}; + struct tda1004x_config { /* the demodulator's i2c address */ @@ -37,14 +56,22 @@ struct tda1004x_config /* Does the OCLK signal need inverted? */ u8 invert_oclk; - /* value of N_I2C of the CONF_PLL3 register */ - u8 n_i2c; + /* Xtal frequency, 4 or 16MHz*/ + enum tda10046_xtal xtal_freq; + + /* IF frequency */ + enum tda10046_if if_freq; + + /* AGC configuration */ + enum tda10046_agc agc_config; /* PLL maintenance */ int (*pll_init)(struct dvb_frontend* fe); + void (*pll_sleep)(struct dvb_frontend* fe); int (*pll_set)(struct dvb_frontend* fe, struct dvb_frontend_parameters* params); /* request firmware for device */ + /* set this to NULL if the card has a firmware EEPROM */ int (*request_firmware)(struct dvb_frontend* fe, const struct firmware **fw, char* name); }; diff --git a/drivers/media/dvb/frontends/tda80xx.c b/drivers/media/dvb/frontends/tda80xx.c index 032d348dafb7..88e125079ca1 100644 --- a/drivers/media/dvb/frontends/tda80xx.c +++ b/drivers/media/dvb/frontends/tda80xx.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/threads.h> #include <linux/interrupt.h> -#include <linux/irq.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> diff --git a/drivers/media/dvb/pluto2/Kconfig b/drivers/media/dvb/pluto2/Kconfig new file mode 100644 index 000000000000..f02842be0d60 --- /dev/null +++ b/drivers/media/dvb/pluto2/Kconfig @@ -0,0 +1,16 @@ +config DVB_PLUTO2 + tristate "Pluto2 cards" + depends on DVB_CORE && PCI + select I2C + select I2C_ALGOBIT + select DVB_TDA1004X + help + Support for PCI cards based on the Pluto2 FPGA like the Satelco + Easywatch Mobile Terrestrial DVB-T Receiver. + + Since these cards have no MPEG decoder onboard, they transmit + only compressed MPEG data over the PCI bus, so you need + an external software decoder to watch TV on your computer. + + Say Y or M if you own such a device and want to use it. + diff --git a/drivers/media/dvb/pluto2/Makefile b/drivers/media/dvb/pluto2/Makefile new file mode 100644 index 000000000000..86ca84b2be6e --- /dev/null +++ b/drivers/media/dvb/pluto2/Makefile @@ -0,0 +1,3 @@ +obj-$(CONFIG_DVB_PLUTO2) = pluto2.o + +EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/ diff --git a/drivers/media/dvb/pluto2/pluto2.c b/drivers/media/dvb/pluto2/pluto2.c new file mode 100644 index 000000000000..706e0bcb5ede --- /dev/null +++ b/drivers/media/dvb/pluto2/pluto2.c @@ -0,0 +1,809 @@ +/* + * pluto2.c - Satelco Easywatch Mobile Terrestrial Receiver [DVB-T] + * + * Copyright (C) 2005 Andreas Oberritter <obi@linuxtv.org> + * + * based on pluto2.c 1.10 - http://instinct-wp8.no-ip.org/pluto/ + * by Dany Salman <salmandany@yahoo.fr> + * Copyright (c) 2004 TDF + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/i2c.h> +#include <linux/i2c-algo-bit.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/dma-mapping.h> + +#include "demux.h" +#include "dmxdev.h" +#include "dvb_demux.h" +#include "dvb_frontend.h" +#include "dvb_net.h" +#include "dvbdev.h" +#include "tda1004x.h" + +#define DRIVER_NAME "pluto2" + +#define REG_PIDn(n) ((n) << 2) /* PID n pattern registers */ +#define REG_PCAR 0x0020 /* PC address register */ +#define REG_TSCR 0x0024 /* TS ctrl & status */ +#define REG_MISC 0x0028 /* miscellaneous */ +#define REG_MMAC 0x002c /* MSB MAC address */ +#define REG_IMAC 0x0030 /* ISB MAC address */ +#define REG_LMAC 0x0034 /* LSB MAC address */ +#define REG_SPID 0x0038 /* SPI data */ +#define REG_SLCS 0x003c /* serial links ctrl/status */ + +#define PID0_NOFIL (0x0001 << 16) +#define PIDn_ENP (0x0001 << 15) +#define PID0_END (0x0001 << 14) +#define PID0_AFIL (0x0001 << 13) +#define PIDn_PID (0x1fff << 0) + +#define TSCR_NBPACKETS (0x00ff << 24) +#define TSCR_DEM (0x0001 << 17) +#define TSCR_DE (0x0001 << 16) +#define TSCR_RSTN (0x0001 << 15) +#define TSCR_MSKO (0x0001 << 14) +#define TSCR_MSKA (0x0001 << 13) +#define TSCR_MSKL (0x0001 << 12) +#define TSCR_OVR (0x0001 << 11) +#define TSCR_AFUL (0x0001 << 10) +#define TSCR_LOCK (0x0001 << 9) +#define TSCR_IACK (0x0001 << 8) +#define TSCR_ADEF (0x007f << 0) + +#define MISC_DVR (0x0fff << 4) +#define MISC_ALED (0x0001 << 3) +#define MISC_FRST (0x0001 << 2) +#define MISC_LED1 (0x0001 << 1) +#define MISC_LED0 (0x0001 << 0) + +#define SPID_SPIDR (0x00ff << 0) + +#define SLCS_SCL (0x0001 << 7) +#define SLCS_SDA (0x0001 << 6) +#define SLCS_CSN (0x0001 << 2) +#define SLCS_OVR (0x0001 << 1) +#define SLCS_SWC (0x0001 << 0) + +#define TS_DMA_PACKETS (8) +#define TS_DMA_BYTES (188 * TS_DMA_PACKETS) + +#define I2C_ADDR_TDA10046 0x10 +#define I2C_ADDR_TUA6034 0xc2 +#define NHWFILTERS 8 + +struct pluto { + /* pci */ + struct pci_dev *pdev; + u8 __iomem *io_mem; + + /* dvb */ + struct dmx_frontend hw_frontend; + struct dmx_frontend mem_frontend; + struct dmxdev dmxdev; + struct dvb_adapter dvb_adapter; + struct dvb_demux demux; + struct dvb_frontend *fe; + struct dvb_net dvbnet; + unsigned int full_ts_users; + unsigned int users; + + /* i2c */ + struct i2c_algo_bit_data i2c_bit; + struct i2c_adapter i2c_adap; + unsigned int i2cbug; + + /* irq */ + unsigned int overflow; + + /* dma */ + dma_addr_t dma_addr; + u8 dma_buf[TS_DMA_BYTES]; + u8 dummy[4096]; +}; + +static inline struct pluto *feed_to_pluto(struct dvb_demux_feed *feed) +{ + return container_of(feed->demux, struct pluto, demux); +} + +static inline struct pluto *frontend_to_pluto(struct dvb_frontend *fe) +{ + return container_of(fe->dvb, struct pluto, dvb_adapter); +} + +static inline u32 pluto_readreg(struct pluto *pluto, u32 reg) +{ + return readl(&pluto->io_mem[reg]); +} + +static inline void pluto_writereg(struct pluto *pluto, u32 reg, u32 val) +{ + writel(val, &pluto->io_mem[reg]); +} + +static inline void pluto_rw(struct pluto *pluto, u32 reg, u32 mask, u32 bits) +{ + u32 val = readl(&pluto->io_mem[reg]); + val &= ~mask; + val |= bits; + writel(val, &pluto->io_mem[reg]); +} + +static void pluto_setsda(void *data, int state) +{ + struct pluto *pluto = data; + + if (state) + pluto_rw(pluto, REG_SLCS, SLCS_SDA, SLCS_SDA); + else + pluto_rw(pluto, REG_SLCS, SLCS_SDA, 0); +} + +static void pluto_setscl(void *data, int state) +{ + struct pluto *pluto = data; + + if (state) + pluto_rw(pluto, REG_SLCS, SLCS_SCL, SLCS_SCL); + else + pluto_rw(pluto, REG_SLCS, SLCS_SCL, 0); + + /* try to detect i2c_inb() to workaround hardware bug: + * reset SDA to high after SCL has been set to low */ + if ((state) && (pluto->i2cbug == 0)) { + pluto->i2cbug = 1; + } else { + if ((!state) && (pluto->i2cbug == 1)) + pluto_setsda(pluto, 1); + pluto->i2cbug = 0; + } +} + +static int pluto_getsda(void *data) +{ + struct pluto *pluto = data; + + return pluto_readreg(pluto, REG_SLCS) & SLCS_SDA; +} + +static int pluto_getscl(void *data) +{ + struct pluto *pluto = data; + + return pluto_readreg(pluto, REG_SLCS) & SLCS_SCL; +} + +static void pluto_reset_frontend(struct pluto *pluto, int reenable) +{ + u32 val = pluto_readreg(pluto, REG_MISC); + + if (val & MISC_FRST) { + val &= ~MISC_FRST; + pluto_writereg(pluto, REG_MISC, val); + } + if (reenable) { + val |= MISC_FRST; + pluto_writereg(pluto, REG_MISC, val); + } +} + +static void pluto_reset_ts(struct pluto *pluto, int reenable) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + if (val & TSCR_RSTN) { + val &= ~TSCR_RSTN; + pluto_writereg(pluto, REG_TSCR, val); + } + if (reenable) { + val |= TSCR_RSTN; + pluto_writereg(pluto, REG_TSCR, val); + } +} + +static void pluto_set_dma_addr(struct pluto *pluto) +{ + pluto_writereg(pluto, REG_PCAR, cpu_to_le32(pluto->dma_addr)); +} + +static int __devinit pluto_dma_map(struct pluto *pluto) +{ + pluto->dma_addr = pci_map_single(pluto->pdev, pluto->dma_buf, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + + return pci_dma_mapping_error(pluto->dma_addr); +} + +static void pluto_dma_unmap(struct pluto *pluto) +{ + pci_unmap_single(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); +} + +static int pluto_start_feed(struct dvb_demux_feed *f) +{ + struct pluto *pluto = feed_to_pluto(f); + + /* enable PID filtering */ + if (pluto->users++ == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_AFIL | PID0_NOFIL, 0); + + if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) + pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, PIDn_ENP | f->pid); + else if (pluto->full_ts_users++ == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, PID0_NOFIL); + + return 0; +} + +static int pluto_stop_feed(struct dvb_demux_feed *f) +{ + struct pluto *pluto = feed_to_pluto(f); + + /* disable PID filtering */ + if (--pluto->users == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_AFIL, PID0_AFIL); + + if ((f->pid < 0x2000) && (f->index < NHWFILTERS)) + pluto_rw(pluto, REG_PIDn(f->index), PIDn_ENP | PIDn_PID, 0x1fff); + else if (--pluto->full_ts_users == 0) + pluto_rw(pluto, REG_PIDn(0), PID0_NOFIL, 0); + + return 0; +} + +static void pluto_dma_end(struct pluto *pluto, unsigned int nbpackets) +{ + /* synchronize the DMA transfer with the CPU + * first so that we see updated contents. */ + pci_dma_sync_single_for_cpu(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); + + /* Workaround for broken hardware: + * [1] On startup NBPACKETS seems to contain an uninitialized value, + * but no packets have been transfered. + * [2] Sometimes (actually very often) NBPACKETS stays at zero + * although one packet has been transfered. + */ + if ((nbpackets == 0) || (nbpackets > TS_DMA_PACKETS)) { + unsigned int i = 0, valid; + while (pluto->dma_buf[i] == 0x47) + i += 188; + valid = i / 188; + if (nbpackets != valid) { + dev_err(&pluto->pdev->dev, "nbpackets=%u valid=%u\n", + nbpackets, valid); + nbpackets = valid; + } + } + + dvb_dmx_swfilter_packets(&pluto->demux, pluto->dma_buf, nbpackets); + + /* clear the dma buffer. this is needed to be able to identify + * new valid ts packets above */ + memset(pluto->dma_buf, 0, nbpackets * 188); + + /* reset the dma address */ + pluto_set_dma_addr(pluto); + + /* sync the buffer and give it back to the card */ + pci_dma_sync_single_for_device(pluto->pdev, pluto->dma_addr, + TS_DMA_BYTES, PCI_DMA_FROMDEVICE); +} + +static irqreturn_t pluto_irq(int irq, void *dev_id, struct pt_regs *regs) +{ + struct pluto *pluto = dev_id; + u32 tscr; + + /* check whether an interrupt occured on this device */ + tscr = pluto_readreg(pluto, REG_TSCR); + if (!(tscr & (TSCR_DE | TSCR_OVR))) + return IRQ_NONE; + + if (tscr == 0xffffffff) { + // FIXME: maybe recover somehow + dev_err(&pluto->pdev->dev, "card hung up :(\n"); + return IRQ_HANDLED; + } + + /* dma end interrupt */ + if (tscr & TSCR_DE) { + pluto_dma_end(pluto, (tscr & TSCR_NBPACKETS) >> 24); + /* overflow interrupt */ + if (tscr & TSCR_OVR) + pluto->overflow++; + if (pluto->overflow) { + dev_err(&pluto->pdev->dev, "overflow irq (%d)\n", + pluto->overflow); + pluto_reset_ts(pluto, 1); + pluto->overflow = 0; + } + } else if (tscr & TSCR_OVR) { + pluto->overflow++; + } + + /* ACK the interrupt */ + pluto_writereg(pluto, REG_TSCR, tscr | TSCR_IACK); + + return IRQ_HANDLED; +} + +static void __devinit pluto_enable_irqs(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + /* set the number of packets */ + val &= ~TSCR_ADEF; + val |= TS_DMA_PACKETS / 2; + /* disable AFUL and LOCK interrupts */ + val |= (TSCR_MSKA | TSCR_MSKL); + /* enable DMA and OVERFLOW interrupts */ + val &= ~(TSCR_DEM | TSCR_MSKO); + /* clear pending interrupts */ + val |= TSCR_IACK; + + pluto_writereg(pluto, REG_TSCR, val); +} + +static void pluto_disable_irqs(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_TSCR); + + /* disable all interrupts */ + val |= (TSCR_DEM | TSCR_MSKO | TSCR_MSKA | TSCR_MSKL); + /* clear pending interrupts */ + val |= TSCR_IACK; + + pluto_writereg(pluto, REG_TSCR, val); +} + +static int __devinit pluto_hw_init(struct pluto *pluto) +{ + pluto_reset_frontend(pluto, 1); + + /* set automatic LED control by FPGA */ + pluto_rw(pluto, REG_MISC, MISC_ALED, MISC_ALED); + + /* set data endianess */ +#ifdef __LITTLE_ENDIAN + pluto_rw(pluto, REG_PIDn(0), PID0_END, PID0_END); +#else + pluto_rw(pluto, REG_PIDn(0), PID0_END, 0); +#endif + /* map DMA and set address */ + pluto_dma_map(pluto); + pluto_set_dma_addr(pluto); + + /* enable interrupts */ + pluto_enable_irqs(pluto); + + /* reset TS logic */ + pluto_reset_ts(pluto, 1); + + return 0; +} + +static void pluto_hw_exit(struct pluto *pluto) +{ + /* disable interrupts */ + pluto_disable_irqs(pluto); + + pluto_reset_ts(pluto, 0); + + /* LED: disable automatic control, enable yellow, disable green */ + pluto_rw(pluto, REG_MISC, MISC_ALED | MISC_LED1 | MISC_LED0, MISC_LED1); + + /* unmap DMA */ + pluto_dma_unmap(pluto); + + pluto_reset_frontend(pluto, 0); +} + +static inline u32 divide(u32 numerator, u32 denominator) +{ + if (denominator == 0) + return ~0; + + return (numerator + denominator / 2) / denominator; +} + +/* LG Innotek TDTE-E001P (Infineon TUA6034) */ +static int lg_tdtpe001p_pll_set(struct dvb_frontend *fe, + struct dvb_frontend_parameters *p) +{ + struct pluto *pluto = frontend_to_pluto(fe); + struct i2c_msg msg; + int ret; + u8 buf[4]; + u32 div; + + // Fref = 166.667 Hz + // Fref * 3 = 500.000 Hz + // IF = 36166667 + // IF / Fref = 217 + //div = divide(p->frequency + 36166667, 166667); + div = divide(p->frequency * 3, 500000) + 217; + buf[0] = (div >> 8) & 0x7f; + buf[1] = (div >> 0) & 0xff; + + if (p->frequency < 611000000) + buf[2] = 0xb4; + else if (p->frequency < 811000000) + buf[2] = 0xbc; + else + buf[2] = 0xf4; + + // VHF: 174-230 MHz + // center: 350 MHz + // UHF: 470-862 MHz + if (p->frequency < 350000000) + buf[3] = 0x02; + else + buf[3] = 0x04; + + if (p->u.ofdm.bandwidth == BANDWIDTH_8_MHZ) + buf[3] |= 0x08; + + if (sizeof(buf) == 6) { + buf[4] = buf[2]; + buf[4] &= ~0x1c; + buf[4] |= 0x18; + + buf[5] = (0 << 7) | (2 << 4); + } + + msg.addr = I2C_ADDR_TUA6034 >> 1; + msg.flags = 0; + msg.buf = buf; + msg.len = sizeof(buf); + + ret = i2c_transfer(&pluto->i2c_adap, &msg, 1); + if (ret < 0) + return ret; + else if (ret == 0) + return -EREMOTEIO; + + return 0; +} + +static int pluto2_request_firmware(struct dvb_frontend *fe, + const struct firmware **fw, char *name) +{ + struct pluto *pluto = frontend_to_pluto(fe); + + return request_firmware(fw, name, &pluto->pdev->dev); +} + +static struct tda1004x_config pluto2_fe_config __devinitdata = { + .demod_address = I2C_ADDR_TDA10046 >> 1, + .invert = 1, + .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_16M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, + .pll_set = lg_tdtpe001p_pll_set, + .pll_sleep = NULL, + .request_firmware = pluto2_request_firmware, +}; + +static int __devinit frontend_init(struct pluto *pluto) +{ + int ret; + + pluto->fe = tda10046_attach(&pluto2_fe_config, &pluto->i2c_adap); + if (!pluto->fe) { + dev_err(&pluto->pdev->dev, "could not attach frontend\n"); + return -ENODEV; + } + + ret = dvb_register_frontend(&pluto->dvb_adapter, pluto->fe); + if (ret < 0) { + if (pluto->fe->ops->release) + pluto->fe->ops->release(pluto->fe); + return ret; + } + + return 0; +} + +static void __devinit pluto_read_rev(struct pluto *pluto) +{ + u32 val = pluto_readreg(pluto, REG_MISC) & MISC_DVR; + dev_info(&pluto->pdev->dev, "board revision %d.%d\n", + (val >> 12) & 0x0f, (val >> 4) & 0xff); +} + +static void __devinit pluto_read_mac(struct pluto *pluto, u8 *mac) +{ + u32 val = pluto_readreg(pluto, REG_MMAC); + mac[0] = (val >> 8) & 0xff; + mac[1] = (val >> 0) & 0xff; + + val = pluto_readreg(pluto, REG_IMAC); + mac[2] = (val >> 8) & 0xff; + mac[3] = (val >> 0) & 0xff; + + val = pluto_readreg(pluto, REG_LMAC); + mac[4] = (val >> 8) & 0xff; + mac[5] = (val >> 0) & 0xff; + + dev_info(&pluto->pdev->dev, "MAC %02x:%02x:%02x:%02x:%02x:%02x\n", + mac[0], mac[1], mac[2], mac[3], mac[4], mac[5]); +} + +static int __devinit pluto_read_serial(struct pluto *pluto) +{ + struct pci_dev *pdev = pluto->pdev; + unsigned int i, j; + u8 __iomem *cis; + + cis = pci_iomap(pdev, 1, 0); + if (!cis) + return -EIO; + + dev_info(&pdev->dev, "S/N "); + + for (i = 0xe0; i < 0x100; i += 4) { + u32 val = readl(&cis[i]); + for (j = 0; j < 32; j += 8) { + if ((val & 0xff) == 0xff) + goto out; + printk("%c", val & 0xff); + val >>= 8; + } + } +out: + printk("\n"); + pci_iounmap(pdev, cis); + + return 0; +} + +static int __devinit pluto2_probe(struct pci_dev *pdev, + const struct pci_device_id *ent) +{ + struct pluto *pluto; + struct dvb_adapter *dvb_adapter; + struct dvb_demux *dvbdemux; + struct dmx_demux *dmx; + int ret = -ENOMEM; + + pluto = kmalloc(sizeof(struct pluto), GFP_KERNEL); + if (!pluto) + goto out; + + memset(pluto, 0, sizeof(struct pluto)); + pluto->pdev = pdev; + + ret = pci_enable_device(pdev); + if (ret < 0) + goto err_kfree; + + /* enable interrupts */ + pci_write_config_dword(pdev, 0x6c, 0x8000); + + ret = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (ret < 0) + goto err_pci_disable_device; + + pci_set_master(pdev); + + ret = pci_request_regions(pdev, DRIVER_NAME); + if (ret < 0) + goto err_pci_disable_device; + + pluto->io_mem = pci_iomap(pdev, 0, 0x40); + if (!pluto->io_mem) { + ret = -EIO; + goto err_pci_release_regions; + } + + pci_set_drvdata(pdev, pluto); + + ret = request_irq(pdev->irq, pluto_irq, SA_SHIRQ, DRIVER_NAME, pluto); + if (ret < 0) + goto err_pci_iounmap; + + ret = pluto_hw_init(pluto); + if (ret < 0) + goto err_free_irq; + + /* i2c */ + i2c_set_adapdata(&pluto->i2c_adap, pluto); + strcpy(pluto->i2c_adap.name, DRIVER_NAME); + pluto->i2c_adap.owner = THIS_MODULE; + pluto->i2c_adap.id = I2C_ALGO_BIT; + pluto->i2c_adap.class = I2C_CLASS_TV_DIGITAL; + pluto->i2c_adap.dev.parent = &pdev->dev; + pluto->i2c_adap.algo_data = &pluto->i2c_bit; + pluto->i2c_bit.data = pluto; + pluto->i2c_bit.setsda = pluto_setsda; + pluto->i2c_bit.setscl = pluto_setscl; + pluto->i2c_bit.getsda = pluto_getsda; + pluto->i2c_bit.getscl = pluto_getscl; + pluto->i2c_bit.udelay = 10; + pluto->i2c_bit.timeout = 10; + + /* Raise SCL and SDA */ + pluto_setsda(pluto, 1); + pluto_setscl(pluto, 1); + + ret = i2c_bit_add_bus(&pluto->i2c_adap); + if (ret < 0) + goto err_pluto_hw_exit; + + /* dvb */ + ret = dvb_register_adapter(&pluto->dvb_adapter, DRIVER_NAME, THIS_MODULE); + if (ret < 0) + goto err_i2c_bit_del_bus; + + dvb_adapter = &pluto->dvb_adapter; + + pluto_read_rev(pluto); + pluto_read_serial(pluto); + pluto_read_mac(pluto, dvb_adapter->proposed_mac); + + dvbdemux = &pluto->demux; + dvbdemux->filternum = 256; + dvbdemux->feednum = 256; + dvbdemux->start_feed = pluto_start_feed; + dvbdemux->stop_feed = pluto_stop_feed; + dvbdemux->dmx.capabilities = (DMX_TS_FILTERING | + DMX_SECTION_FILTERING | DMX_MEMORY_BASED_FILTERING); + ret = dvb_dmx_init(dvbdemux); + if (ret < 0) + goto err_dvb_unregister_adapter; + + dmx = &dvbdemux->dmx; + + pluto->hw_frontend.source = DMX_FRONTEND_0; + pluto->mem_frontend.source = DMX_MEMORY_FE; + pluto->dmxdev.filternum = NHWFILTERS; + pluto->dmxdev.demux = dmx; + + ret = dvb_dmxdev_init(&pluto->dmxdev, dvb_adapter); + if (ret < 0) + goto err_dvb_dmx_release; + + ret = dmx->add_frontend(dmx, &pluto->hw_frontend); + if (ret < 0) + goto err_dvb_dmxdev_release; + + ret = dmx->add_frontend(dmx, &pluto->mem_frontend); + if (ret < 0) + goto err_remove_hw_frontend; + + ret = dmx->connect_frontend(dmx, &pluto->hw_frontend); + if (ret < 0) + goto err_remove_mem_frontend; + + ret = frontend_init(pluto); + if (ret < 0) + goto err_disconnect_frontend; + + dvb_net_init(dvb_adapter, &pluto->dvbnet, dmx); +out: + return ret; + +err_disconnect_frontend: + dmx->disconnect_frontend(dmx); +err_remove_mem_frontend: + dmx->remove_frontend(dmx, &pluto->mem_frontend); +err_remove_hw_frontend: + dmx->remove_frontend(dmx, &pluto->hw_frontend); +err_dvb_dmxdev_release: + dvb_dmxdev_release(&pluto->dmxdev); +err_dvb_dmx_release: + dvb_dmx_release(dvbdemux); +err_dvb_unregister_adapter: + dvb_unregister_adapter(dvb_adapter); +err_i2c_bit_del_bus: + i2c_bit_del_bus(&pluto->i2c_adap); +err_pluto_hw_exit: + pluto_hw_exit(pluto); +err_free_irq: + free_irq(pdev->irq, pluto); +err_pci_iounmap: + pci_iounmap(pdev, pluto->io_mem); +err_pci_release_regions: + pci_release_regions(pdev); +err_pci_disable_device: + pci_disable_device(pdev); +err_kfree: + pci_set_drvdata(pdev, NULL); + kfree(pluto); + goto out; +} + +static void __devexit pluto2_remove(struct pci_dev *pdev) +{ + struct pluto *pluto = pci_get_drvdata(pdev); + struct dvb_adapter *dvb_adapter = &pluto->dvb_adapter; + struct dvb_demux *dvbdemux = &pluto->demux; + struct dmx_demux *dmx = &dvbdemux->dmx; + + dmx->close(dmx); + dvb_net_release(&pluto->dvbnet); + if (pluto->fe) + dvb_unregister_frontend(pluto->fe); + + dmx->disconnect_frontend(dmx); + dmx->remove_frontend(dmx, &pluto->mem_frontend); + dmx->remove_frontend(dmx, &pluto->hw_frontend); + dvb_dmxdev_release(&pluto->dmxdev); + dvb_dmx_release(dvbdemux); + dvb_unregister_adapter(dvb_adapter); + i2c_bit_del_bus(&pluto->i2c_adap); + pluto_hw_exit(pluto); + free_irq(pdev->irq, pluto); + pci_iounmap(pdev, pluto->io_mem); + pci_release_regions(pdev); + pci_disable_device(pdev); + pci_set_drvdata(pdev, NULL); + kfree(pluto); +} + +#ifndef PCI_VENDOR_ID_SCM +#define PCI_VENDOR_ID_SCM 0x0432 +#endif +#ifndef PCI_DEVICE_ID_PLUTO2 +#define PCI_DEVICE_ID_PLUTO2 0x0001 +#endif + +static struct pci_device_id pluto2_id_table[] __devinitdata = { + { + .vendor = PCI_VENDOR_ID_SCM, + .device = PCI_DEVICE_ID_PLUTO2, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + }, { + /* empty */ + }, +}; + +MODULE_DEVICE_TABLE(pci, pluto2_id_table); + +static struct pci_driver pluto2_driver = { + .name = DRIVER_NAME, + .id_table = pluto2_id_table, + .probe = pluto2_probe, + .remove = __devexit_p(pluto2_remove), +}; + +static int __init pluto2_init(void) +{ + return pci_register_driver(&pluto2_driver); +} + +static void __exit pluto2_exit(void) +{ + pci_unregister_driver(&pluto2_driver); +} + +module_init(pluto2_init); +module_exit(pluto2_exit); + +MODULE_AUTHOR("Andreas Oberritter <obi@linuxtv.org>"); +MODULE_DESCRIPTION("Pluto2 driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/media/dvb/ttpci/Kconfig b/drivers/media/dvb/ttpci/Kconfig index 7ffa2c7315b3..bf3c011d2cfb 100644 --- a/drivers/media/dvb/ttpci/Kconfig +++ b/drivers/media/dvb/ttpci/Kconfig @@ -12,7 +12,7 @@ config DVB_AV7110 select DVB_STV0297 select DVB_L64781 help - Support for SAA7146 and AV7110 based DVB cards as produced + Support for SAA7146 and AV7110 based DVB cards as produced by Fujitsu-Siemens, Technotrend, Hauppauge and others. This driver only supports the fullfeatured cards with @@ -33,7 +33,7 @@ config DVB_AV7110_FIRMWARE If you want to compile the firmware into the driver you need to say Y here and provide the correct path of the firmware. You need this option if you want to compile the whole driver statically into the - kernel. + kernel. All other people say N. @@ -66,6 +66,7 @@ config DVB_BUDGET select DVB_L64781 select DVB_TDA8083 select DVB_TDA10021 + select DVB_S5H1420 help Support for simple SAA7146 based DVB cards (so called Budget- or Nova-PCI cards) without onboard @@ -119,9 +120,9 @@ config DVB_BUDGET_PATCH select DVB_VES1X93 select DVB_TDA8083 help - Support for Budget Patch (full TS) modification on + Support for Budget Patch (full TS) modification on SAA7146+AV7110 based cards (DVB-S cards). This - driver doesn't use onboard MPEG2 decoder. The + driver doesn't use onboard MPEG2 decoder. The card is driven in Budget-only mode. Card is required to have loaded firmware to tune properly. Firmware can be loaded by insertion and removal of diff --git a/drivers/media/dvb/ttpci/av7110.c b/drivers/media/dvb/ttpci/av7110.c index 8e33a850e13e..e4c6e87f6c5d 100644 --- a/drivers/media/dvb/ttpci/av7110.c +++ b/drivers/media/dvb/ttpci/av7110.c @@ -116,13 +116,18 @@ static int av7110_num = 0; static void init_av7110_av(struct av7110 *av7110) { + int ret; struct saa7146_dev *dev = av7110->dev; /* set internal volume control to maximum */ av7110->adac_type = DVB_ADAC_TI; - av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); + ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); + if (ret < 0) + printk("dvb-ttpci:cannot set internal volume to maximum:%d\n",ret); - av7710_set_video_mode(av7110, vidmode); + ret = av7710_set_video_mode(av7110, vidmode); + if (ret < 0) + printk("dvb-ttpci:cannot set video mode:%d\n",ret); /* handle different card types */ /* remaining inits according to card and frontend type */ @@ -156,8 +161,12 @@ static void init_av7110_av(struct av7110 *av7110) if (av7110->adac_type == DVB_ADAC_NONE || av7110->adac_type == DVB_ADAC_MSP) { // switch DVB SCART on - av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, MainSwitch, 1, 0); - av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, 1); + ret = av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, MainSwitch, 1, 0); + if (ret < 0) + printk("dvb-ttpci:cannot switch on SCART(Main):%d\n",ret); + ret = av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, ADSwitch, 1, 1); + if (ret < 0) + printk("dvb-ttpci:cannot switch on SCART(AD):%d\n",ret); if (rgb_on && (av7110->dev->pci->subsystem_vendor == 0x110a) && (av7110->dev->pci->subsystem_device == 0x0000)) { saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); // RGB on, SCART pin 16 @@ -165,8 +174,12 @@ static void init_av7110_av(struct av7110 *av7110) } } - av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); - av7110_setup_irc_config(av7110, 0); + ret = av7110_set_volume(av7110, av7110->mixer.volume_left, av7110->mixer.volume_right); + if (ret < 0) + printk("dvb-ttpci:cannot set volume :%d\n",ret); + ret = av7110_setup_irc_config(av7110, 0); + if (ret < 0) + printk("dvb-ttpci:cannot setup irc config :%d\n",ret); } static void recover_arm(struct av7110 *av7110) @@ -258,8 +271,9 @@ static int arm_thread(void *data) * * If we want to support multiple controls we would have to do much more... */ -void av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config) +int av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config) { + int ret = 0; static struct av7110 *last; dprintk(4, "%p\n", av7110); @@ -270,9 +284,10 @@ void av7110_setup_irc_config(struct av7110 *av7110, u32 ir_config) last = av7110; if (av7110) { - av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config); + ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, SetIR, 1, ir_config); av7110->ir_config = ir_config; } + return ret; } static void (*irc_handler)(u32); @@ -765,13 +780,14 @@ static inline int SetPIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, pcrpid, vpid, apid, ttpid, subpid); } -void ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, +int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, u16 subpid, u16 pcrpid) { + int ret = 0; dprintk(4, "%p\n", av7110); if (down_interruptible(&av7110->pid_mutex)) - return; + return -ERESTARTSYS; if (!(vpid & 0x8000)) av7110->pids[DMX_PES_VIDEO] = vpid; @@ -786,10 +802,11 @@ void ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, if (av7110->fe_synced) { pcrpid = av7110->pids[DMX_PES_PCR]; - SetPIDs(av7110, vpid, apid, ttpid, subpid, pcrpid); + ret = SetPIDs(av7110, vpid, apid, ttpid, subpid, pcrpid); } up(&av7110->pid_mutex); + return ret; } @@ -832,11 +849,13 @@ static int StartHWFilter(struct dvb_demux_filter *dvbdmxfilter) ret = av7110_fw_request(av7110, buf, 20, &handle, 1); if (ret != 0 || handle >= 32) { printk("dvb-ttpci: %s error buf %04x %04x %04x %04x " - "ret %x handle %04x\n", + "ret %d handle %04x\n", __FUNCTION__, buf[0], buf[1], buf[2], buf[3], ret, handle); dvbdmxfilter->hw_handle = 0xffff; - return -1; + if (!ret) + ret = -1; + return ret; } av7110->handle2filter[handle] = dvbdmxfilter; @@ -859,7 +878,7 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) if (handle >= 32) { printk("%s tried to stop invalid filter %04x, filter type = %x\n", __FUNCTION__, handle, dvbdmxfilter->type); - return 0; + return -EINVAL; } av7110->handle2filter[handle] = NULL; @@ -873,18 +892,20 @@ static int StopHWFilter(struct dvb_demux_filter *dvbdmxfilter) "resp %04x %04x pid %d\n", __FUNCTION__, buf[0], buf[1], buf[2], ret, answ[0], answ[1], dvbdmxfilter->feed->pid); - ret = -1; + if (!ret) + ret = -1; } return ret; } -static void dvb_feed_start_pid(struct dvb_demux_feed *dvbdmxfeed) +static int dvb_feed_start_pid(struct dvb_demux_feed *dvbdmxfeed) { struct dvb_demux *dvbdmx = dvbdmxfeed->demux; struct av7110 *av7110 = (struct av7110 *) dvbdmx->priv; u16 *pid = dvbdmx->pids, npids[5]; int i; + int ret = 0; dprintk(4, "%p\n", av7110); @@ -893,36 +914,49 @@ static void dvb_feed_start_pid(struct dvb_demux_feed *dvbdmxfeed) npids[i] = (pid[i]&0x8000) ? 0 : pid[i]; if ((i == 2) && npids[i] && (dvbdmxfeed->ts_type & TS_PACKET)) { npids[i] = 0; - ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); - StartHWFilter(dvbdmxfeed->filter); - return; + ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); + if (!ret) + ret = StartHWFilter(dvbdmxfeed->filter); + return ret; + } + if (dvbdmxfeed->pes_type <= 2 || dvbdmxfeed->pes_type == 4) { + ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); + if (ret) + return ret; } - if (dvbdmxfeed->pes_type <= 2 || dvbdmxfeed->pes_type == 4) - ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); if (dvbdmxfeed->pes_type < 2 && npids[0]) if (av7110->fe_synced) - av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); + { + ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); + if (ret) + return ret; + } if ((dvbdmxfeed->ts_type & TS_PACKET)) { if (dvbdmxfeed->pes_type == 0 && !(dvbdmx->pids[0] & 0x8000)) - av7110_av_start_record(av7110, RP_AUDIO, dvbdmxfeed); + ret = av7110_av_start_record(av7110, RP_AUDIO, dvbdmxfeed); if (dvbdmxfeed->pes_type == 1 && !(dvbdmx->pids[1] & 0x8000)) - av7110_av_start_record(av7110, RP_VIDEO, dvbdmxfeed); + ret = av7110_av_start_record(av7110, RP_VIDEO, dvbdmxfeed); } + return ret; } -static void dvb_feed_stop_pid(struct dvb_demux_feed *dvbdmxfeed) +static int dvb_feed_stop_pid(struct dvb_demux_feed *dvbdmxfeed) { struct dvb_demux *dvbdmx = dvbdmxfeed->demux; struct av7110 *av7110 = (struct av7110 *) dvbdmx->priv; u16 *pid = dvbdmx->pids, npids[5]; int i; + int ret = 0; + dprintk(4, "%p\n", av7110); if (dvbdmxfeed->pes_type <= 1) { - av7110_av_stop(av7110, dvbdmxfeed->pes_type ? RP_VIDEO : RP_AUDIO); + ret = av7110_av_stop(av7110, dvbdmxfeed->pes_type ? RP_VIDEO : RP_AUDIO); + if (ret) + return ret; if (!av7110->rec_mode) dvbdmx->recording = 0; if (!av7110->playing) @@ -933,24 +967,27 @@ static void dvb_feed_stop_pid(struct dvb_demux_feed *dvbdmxfeed) switch (i) { case 2: //teletext if (dvbdmxfeed->ts_type & TS_PACKET) - StopHWFilter(dvbdmxfeed->filter); + ret = StopHWFilter(dvbdmxfeed->filter); npids[2] = 0; break; case 0: case 1: case 4: if (!pids_off) - return; + return 0; npids[i] = (pid[i]&0x8000) ? 0 : pid[i]; break; } - ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); + if (!ret) + ret = ChangePIDs(av7110, npids[1], npids[0], npids[2], npids[3], npids[4]); + return ret; } static int av7110_start_feed(struct dvb_demux_feed *feed) { struct dvb_demux *demux = feed->demux; struct av7110 *av7110 = demux->priv; + int ret = 0; dprintk(4, "%p\n", av7110); @@ -971,21 +1008,22 @@ static int av7110_start_feed(struct dvb_demux_feed *feed) !(demux->pids[1] & 0x8000)) { dvb_ringbuffer_flush_spinlock_wakeup(&av7110->avout); dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout); - av7110_av_start_play(av7110,RP_AV); - demux->playing = 1; + ret = av7110_av_start_play(av7110,RP_AV); + if (!ret) + demux->playing = 1; } break; default: - dvb_feed_start_pid(feed); + ret = dvb_feed_start_pid(feed); break; } } else if ((feed->ts_type & TS_PACKET) && (demux->dmx.frontend->source != DMX_MEMORY_FE)) { - StartHWFilter(feed->filter); + ret = StartHWFilter(feed->filter); } } - if (feed->type == DMX_TYPE_SEC) { + else if (feed->type == DMX_TYPE_SEC) { int i; for (i = 0; i < demux->filternum; i++) { @@ -996,12 +1034,15 @@ static int av7110_start_feed(struct dvb_demux_feed *feed) if (demux->filter[i].filter.parent != &feed->feed.sec) continue; demux->filter[i].state = DMX_STATE_GO; - if (demux->dmx.frontend->source != DMX_MEMORY_FE) - StartHWFilter(&demux->filter[i]); + if (demux->dmx.frontend->source != DMX_MEMORY_FE) { + ret = StartHWFilter(&demux->filter[i]); + if (ret) + break; + } } } - return 0; + return ret; } @@ -1009,7 +1050,7 @@ static int av7110_stop_feed(struct dvb_demux_feed *feed) { struct dvb_demux *demux = feed->demux; struct av7110 *av7110 = demux->priv; - + int i, rc, ret = 0; dprintk(4, "%p\n", av7110); if (feed->type == DMX_TYPE_TS) { @@ -1022,26 +1063,29 @@ static int av7110_stop_feed(struct dvb_demux_feed *feed) } if (feed->ts_type & TS_DECODER && feed->pes_type < DMX_TS_PES_OTHER) { - dvb_feed_stop_pid(feed); + ret = dvb_feed_stop_pid(feed); } else if ((feed->ts_type & TS_PACKET) && (demux->dmx.frontend->source != DMX_MEMORY_FE)) - StopHWFilter(feed->filter); + ret = StopHWFilter(feed->filter); } - if (feed->type == DMX_TYPE_SEC) { - int i; - - for (i = 0; i<demux->filternum; i++) + if (!ret && feed->type == DMX_TYPE_SEC) { + for (i = 0; i<demux->filternum; i++) { if (demux->filter[i].state == DMX_STATE_GO && demux->filter[i].filter.parent == &feed->feed.sec) { demux->filter[i].state = DMX_STATE_READY; - if (demux->dmx.frontend->source != DMX_MEMORY_FE) - StopHWFilter(&demux->filter[i]); + if (demux->dmx.frontend->source != DMX_MEMORY_FE) { + rc = StopHWFilter(&demux->filter[i]); + if (!ret) + ret = rc; + /* keep going, stop as many filters as possible */ + } + } } } - return 0; + return ret; } @@ -1093,7 +1137,7 @@ static int dvb_get_stc(struct dmx_demux *demux, unsigned int num, ret = av7110_fw_request(av7110, &tag, 0, fwstc, 4); if (ret) { printk(KERN_ERR "%s: av7110_fw_request error\n", __FUNCTION__); - return -EIO; + return ret; } dprintk(2, "fwstc = %04hx %04hx %04hx %04hx\n", fwstc[0], fwstc[1], fwstc[2], fwstc[3]); @@ -1119,18 +1163,14 @@ static int av7110_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) switch (tone) { case SEC_TONE_ON: - Set22K(av7110, 1); - break; + return Set22K(av7110, 1); case SEC_TONE_OFF: - Set22K(av7110, 0); - break; + return Set22K(av7110, 0); default: return -EINVAL; } - - return 0; } static int av7110_diseqc_send_master_cmd(struct dvb_frontend* fe, @@ -1138,9 +1178,7 @@ static int av7110_diseqc_send_master_cmd(struct dvb_frontend* fe, { struct av7110* av7110 = fe->dvb->priv; - av7110_diseqc_send(av7110, cmd->msg_len, cmd->msg, -1); - - return 0; + return av7110_diseqc_send(av7110, cmd->msg_len, cmd->msg, -1); } static int av7110_diseqc_send_burst(struct dvb_frontend* fe, @@ -1148,9 +1186,7 @@ static int av7110_diseqc_send_burst(struct dvb_frontend* fe, { struct av7110* av7110 = fe->dvb->priv; - av7110_diseqc_send(av7110, 0, NULL, minicmd); - - return 0; + return av7110_diseqc_send(av7110, 0, NULL, minicmd); } /* simplified code from budget-core.c */ @@ -1992,76 +2028,85 @@ static struct l64781_config grundig_29504_401_config = { -static void av7110_fe_lock_fix(struct av7110* av7110, fe_status_t status) +static int av7110_fe_lock_fix(struct av7110* av7110, fe_status_t status) { + int ret = 0; int synced = (status & FE_HAS_LOCK) ? 1 : 0; av7110->fe_status = status; if (av7110->fe_synced == synced) - return; - - av7110->fe_synced = synced; + return 0; if (av7110->playing) - return; + return 0; if (down_interruptible(&av7110->pid_mutex)) - return; + return -ERESTARTSYS; - if (av7110->fe_synced) { - SetPIDs(av7110, av7110->pids[DMX_PES_VIDEO], + if (synced) { + ret = SetPIDs(av7110, av7110->pids[DMX_PES_VIDEO], av7110->pids[DMX_PES_AUDIO], av7110->pids[DMX_PES_TELETEXT], 0, av7110->pids[DMX_PES_PCR]); - av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); + if (!ret) + ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); } else { - SetPIDs(av7110, 0, 0, 0, 0, 0); - av7110_fw_cmd(av7110, COMTYPE_PID_FILTER, FlushTSQueue, 0); - av7110_wait_msgstate(av7110, GPMQBusy); + ret = SetPIDs(av7110, 0, 0, 0, 0, 0); + if (!ret) { + ret = av7110_fw_cmd(av7110, COMTYPE_PID_FILTER, FlushTSQueue, 0); + if (!ret) + ret = av7110_wait_msgstate(av7110, GPMQBusy); + } } + if (!ret) + av7110->fe_synced = synced; + up(&av7110->pid_mutex); + return ret; } static int av7110_fe_set_frontend(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { struct av7110* av7110 = fe->dvb->priv; - av7110_fe_lock_fix(av7110, 0); - return av7110->fe_set_frontend(fe, params); + + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_set_frontend(fe, params); + return ret; } static int av7110_fe_init(struct dvb_frontend* fe) { struct av7110* av7110 = fe->dvb->priv; - av7110_fe_lock_fix(av7110, 0); - return av7110->fe_init(fe); + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_init(fe); + return ret; } static int av7110_fe_read_status(struct dvb_frontend* fe, fe_status_t* status) { struct av7110* av7110 = fe->dvb->priv; - int ret; /* call the real implementation */ - ret = av7110->fe_read_status(fe, status); - if (ret) - return ret; - - if (((*status ^ av7110->fe_status) & FE_HAS_LOCK) && (*status & FE_HAS_LOCK)) { - av7110_fe_lock_fix(av7110, *status); - } - - return 0; + int ret = av7110->fe_read_status(fe, status); + if (!ret) + if (((*status ^ av7110->fe_status) & FE_HAS_LOCK) && (*status & FE_HAS_LOCK)) + ret = av7110_fe_lock_fix(av7110, *status); + return ret; } static int av7110_fe_diseqc_reset_overload(struct dvb_frontend* fe) { struct av7110* av7110 = fe->dvb->priv; - av7110_fe_lock_fix(av7110, 0); - return av7110->fe_diseqc_reset_overload(fe); + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_diseqc_reset_overload(fe); + return ret; } static int av7110_fe_diseqc_send_master_cmd(struct dvb_frontend* fe, @@ -2069,40 +2114,50 @@ static int av7110_fe_diseqc_send_master_cmd(struct dvb_frontend* fe, { struct av7110* av7110 = fe->dvb->priv; - av7110_fe_lock_fix(av7110, 0); - return av7110->fe_diseqc_send_master_cmd(fe, cmd); + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_diseqc_send_master_cmd(fe, cmd); + return ret; } static int av7110_fe_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t minicmd) { struct av7110* av7110 = fe->dvb->priv; - av7110_fe_lock_fix(av7110, 0); - return av7110->fe_diseqc_send_burst(fe, minicmd); + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_diseqc_send_burst(fe, minicmd); + return ret; } static int av7110_fe_set_tone(struct dvb_frontend* fe, fe_sec_tone_mode_t tone) { struct av7110* av7110 = fe->dvb->priv; - av7110_fe_lock_fix(av7110, 0); - return av7110->fe_set_tone(fe, tone); + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_set_tone(fe, tone); + return ret; } static int av7110_fe_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) { struct av7110* av7110 = fe->dvb->priv; - av7110_fe_lock_fix(av7110, 0); - return av7110->fe_set_voltage(fe, voltage); + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_set_voltage(fe, voltage); + return ret; } static int av7110_fe_dishnetwork_send_legacy_command(struct dvb_frontend* fe, unsigned int cmd) { struct av7110* av7110 = fe->dvb->priv; - av7110_fe_lock_fix(av7110, 0); - return av7110->fe_dishnetwork_send_legacy_command(fe, cmd); + int ret = av7110_fe_lock_fix(av7110, 0); + if (!ret) + ret = av7110->fe_dishnetwork_send_legacy_command(fe, cmd); + return ret; } static u8 read_pwm(struct av7110* av7110) diff --git a/drivers/media/dvb/ttpci/av7110.h b/drivers/media/dvb/ttpci/av7110.h index 4f69b4d01479..508b7739c609 100644 --- a/drivers/media/dvb/ttpci/av7110.h +++ b/drivers/media/dvb/ttpci/av7110.h @@ -119,8 +119,7 @@ struct av7110 { volatile int bmp_state; #define BMP_NONE 0 #define BMP_LOADING 1 -#define BMP_LOADINGS 2 -#define BMP_LOADED 3 +#define BMP_LOADED 2 wait_queue_head_t bmpq; @@ -255,12 +254,12 @@ struct av7110 { }; -extern void ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, +extern int ChangePIDs(struct av7110 *av7110, u16 vpid, u16 apid, u16 ttpid, u16 subpid, u16 pcrpid); extern void av7110_register_irc_handler(void (*func)(u32)); extern void av7110_unregister_irc_handler(void (*func)(u32)); -extern void av7110_setup_irc_config (struct av7110 *av7110, u32 ir_config); +extern int av7110_setup_irc_config (struct av7110 *av7110, u32 ir_config); extern int av7110_ir_init (void); extern void av7110_ir_exit (void); diff --git a/drivers/media/dvb/ttpci/av7110_av.c b/drivers/media/dvb/ttpci/av7110_av.c index ccf946125d02..0696a5a4f855 100644 --- a/drivers/media/dvb/ttpci/av7110_av.c +++ b/drivers/media/dvb/ttpci/av7110_av.c @@ -121,6 +121,7 @@ static int dvb_filter_pes2ts_cb(void *priv, unsigned char *data) int av7110_av_start_record(struct av7110 *av7110, int av, struct dvb_demux_feed *dvbdmxfeed) { + int ret = 0; struct dvb_demux *dvbdmx = dvbdmxfeed->demux; dprintk(2, "av7110:%p, , dvb_demux_feed:%p\n", av7110, dvbdmxfeed); @@ -137,7 +138,7 @@ int av7110_av_start_record(struct av7110 *av7110, int av, dvbdmx->pesfilter[0]->pid, dvb_filter_pes2ts_cb, (void *) dvbdmx->pesfilter[0]); - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AudioPES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AudioPES, 0); break; case RP_VIDEO: @@ -145,7 +146,7 @@ int av7110_av_start_record(struct av7110 *av7110, int av, dvbdmx->pesfilter[1]->pid, dvb_filter_pes2ts_cb, (void *) dvbdmx->pesfilter[1]); - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, VideoPES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, VideoPES, 0); break; case RP_AV: @@ -157,14 +158,15 @@ int av7110_av_start_record(struct av7110 *av7110, int av, dvbdmx->pesfilter[1]->pid, dvb_filter_pes2ts_cb, (void *) dvbdmx->pesfilter[1]); - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AV_PES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AV_PES, 0); break; } - return 0; + return ret; } int av7110_av_start_play(struct av7110 *av7110, int av) { + int ret = 0; dprintk(2, "av7110:%p, \n", av7110); if (av7110->rec_mode) @@ -182,54 +184,57 @@ int av7110_av_start_play(struct av7110 *av7110, int av) av7110->playing |= av; switch (av7110->playing) { case RP_AUDIO: - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AudioPES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AudioPES, 0); break; case RP_VIDEO: - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, VideoPES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, VideoPES, 0); av7110->sinfo = 0; break; case RP_AV: av7110->sinfo = 0; - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AV_PES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AV_PES, 0); break; } - return av7110->playing; + if (!ret) + ret = av7110->playing; + return ret; } -void av7110_av_stop(struct av7110 *av7110, int av) +int av7110_av_stop(struct av7110 *av7110, int av) { + int ret = 0; dprintk(2, "av7110:%p, \n", av7110); if (!(av7110->playing & av) && !(av7110->rec_mode & av)) - return; - + return 0; av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0); if (av7110->playing) { av7110->playing &= ~av; switch (av7110->playing) { case RP_AUDIO: - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AudioPES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, AudioPES, 0); break; case RP_VIDEO: - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, VideoPES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Play, 2, VideoPES, 0); break; case RP_NONE: - av7110_set_vidmode(av7110, av7110->vidmode); + ret = av7110_set_vidmode(av7110, av7110->vidmode); break; } } else { av7110->rec_mode &= ~av; switch (av7110->rec_mode) { case RP_AUDIO: - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AudioPES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, AudioPES, 0); break; case RP_VIDEO: - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, VideoPES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Record, 2, VideoPES, 0); break; case RP_NONE: break; } } + return ret; } @@ -317,19 +322,22 @@ int av7110_set_volume(struct av7110 *av7110, int volleft, int volright) return 0; } -void av7110_set_vidmode(struct av7110 *av7110, int mode) +int av7110_set_vidmode(struct av7110 *av7110, int mode) { + int ret; dprintk(2, "av7110:%p, \n", av7110); - av7110_fw_cmd(av7110, COMTYPE_ENCODER, LoadVidCode, 1, mode); + ret = av7110_fw_cmd(av7110, COMTYPE_ENCODER, LoadVidCode, 1, mode); - if (!av7110->playing) { - ChangePIDs(av7110, av7110->pids[DMX_PES_VIDEO], + if (!ret && !av7110->playing) { + ret = ChangePIDs(av7110, av7110->pids[DMX_PES_VIDEO], av7110->pids[DMX_PES_AUDIO], av7110->pids[DMX_PES_TELETEXT], 0, av7110->pids[DMX_PES_PCR]); - av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); + if (!ret) + ret = av7110_fw_cmd(av7110, COMTYPE_PIDFILTER, Scan, 0); } + return ret; } @@ -340,17 +348,18 @@ static int sw2mode[16] = { VIDEO_MODE_PAL, VIDEO_MODE_PAL, VIDEO_MODE_PAL, VIDEO_MODE_PAL, }; -static void get_video_format(struct av7110 *av7110, u8 *buf, int count) +static int get_video_format(struct av7110 *av7110, u8 *buf, int count) { int i; int hsize, vsize; int sw; u8 *p; + int ret = 0; dprintk(2, "av7110:%p, \n", av7110); if (av7110->sinfo) - return; + return 0; for (i = 7; i < count - 10; i++) { p = buf + i; if (p[0] || p[1] || p[2] != 0x01 || p[3] != 0xb3) @@ -359,11 +368,14 @@ static void get_video_format(struct av7110 *av7110, u8 *buf, int count) hsize = ((p[1] &0xF0) >> 4) | (p[0] << 4); vsize = ((p[1] &0x0F) << 8) | (p[2]); sw = (p[3] & 0x0F); - av7110_set_vidmode(av7110, sw2mode[sw]); - dprintk(2, "playback %dx%d fr=%d\n", hsize, vsize, sw); - av7110->sinfo = 1; + ret = av7110_set_vidmode(av7110, sw2mode[sw]); + if (!ret) { + dprintk(2, "playback %dx%d fr=%d\n", hsize, vsize, sw); + av7110->sinfo = 1; + } break; } + return ret; } @@ -974,7 +986,7 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file, unsigned long arg = (unsigned long) parg; int ret = 0; - dprintk(2, "av7110:%p, \n", av7110); + dprintk(1, "av7110:%p, cmd=%04x\n", av7110,cmd); if ((file->f_flags & O_ACCMODE) == O_RDONLY) { if ( cmd != VIDEO_GET_STATUS && cmd != VIDEO_GET_EVENT && @@ -987,49 +999,57 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file, case VIDEO_STOP: av7110->videostate.play_state = VIDEO_STOPPED; if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY) - av7110_av_stop(av7110, RP_VIDEO); + ret = av7110_av_stop(av7110, RP_VIDEO); else - vidcom(av7110, VIDEO_CMD_STOP, + ret = vidcom(av7110, VIDEO_CMD_STOP, av7110->videostate.video_blank ? 0 : 1); - av7110->trickmode = TRICK_NONE; + if (!ret) + av7110->trickmode = TRICK_NONE; break; case VIDEO_PLAY: av7110->trickmode = TRICK_NONE; if (av7110->videostate.play_state == VIDEO_FREEZED) { av7110->videostate.play_state = VIDEO_PLAYING; - vidcom(av7110, VIDEO_CMD_PLAY, 0); + ret = vidcom(av7110, VIDEO_CMD_PLAY, 0); + if (ret) + break; } if (av7110->videostate.stream_source == VIDEO_SOURCE_MEMORY) { if (av7110->playing == RP_AV) { - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Stop, 0); + if (ret) + break; av7110->playing &= ~RP_VIDEO; } - av7110_av_start_play(av7110, RP_VIDEO); - vidcom(av7110, VIDEO_CMD_PLAY, 0); - } else { - //av7110_av_stop(av7110, RP_VIDEO); - vidcom(av7110, VIDEO_CMD_PLAY, 0); + ret = av7110_av_start_play(av7110, RP_VIDEO); } - av7110->videostate.play_state = VIDEO_PLAYING; + if (!ret) + ret = vidcom(av7110, VIDEO_CMD_PLAY, 0); + if (!ret) + av7110->videostate.play_state = VIDEO_PLAYING; break; case VIDEO_FREEZE: av7110->videostate.play_state = VIDEO_FREEZED; if (av7110->playing & RP_VIDEO) - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Pause, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Pause, 0); else - vidcom(av7110, VIDEO_CMD_FREEZE, 1); - av7110->trickmode = TRICK_FREEZE; + ret = vidcom(av7110, VIDEO_CMD_FREEZE, 1); + if (!ret) + av7110->trickmode = TRICK_FREEZE; break; case VIDEO_CONTINUE: if (av7110->playing & RP_VIDEO) - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Continue, 0); - vidcom(av7110, VIDEO_CMD_PLAY, 0); - av7110->videostate.play_state = VIDEO_PLAYING; - av7110->trickmode = TRICK_NONE; + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Continue, 0); + if (!ret) + ret = vidcom(av7110, VIDEO_CMD_PLAY, 0); + if (!ret) { + av7110->videostate.play_state = VIDEO_PLAYING; + av7110->trickmode = TRICK_NONE; + } break; case VIDEO_SELECT_SOURCE: @@ -1045,7 +1065,7 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file, break; case VIDEO_GET_EVENT: - ret=dvb_video_get_event(av7110, parg, file->f_flags); + ret = dvb_video_get_event(av7110, parg, file->f_flags); break; case VIDEO_GET_SIZE: @@ -1105,25 +1125,32 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file, case VIDEO_FAST_FORWARD: //note: arg is ignored by firmware if (av7110->playing & RP_VIDEO) - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, - __Scan_I, 2, AV_PES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Scan_I, 2, AV_PES, 0); else - vidcom(av7110, VIDEO_CMD_FFWD, arg); - av7110->trickmode = TRICK_FAST; - av7110->videostate.play_state = VIDEO_PLAYING; + ret = vidcom(av7110, VIDEO_CMD_FFWD, arg); + if (!ret) { + av7110->trickmode = TRICK_FAST; + av7110->videostate.play_state = VIDEO_PLAYING; + } break; case VIDEO_SLOWMOTION: if (av7110->playing&RP_VIDEO) { - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Slow, 2, 0, 0); - vidcom(av7110, VIDEO_CMD_SLOW, arg); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, __Slow, 2, 0, 0); + if (!ret) + ret = vidcom(av7110, VIDEO_CMD_SLOW, arg); } else { - vidcom(av7110, VIDEO_CMD_PLAY, 0); - vidcom(av7110, VIDEO_CMD_STOP, 0); - vidcom(av7110, VIDEO_CMD_SLOW, arg); + ret = vidcom(av7110, VIDEO_CMD_PLAY, 0); + if (!ret) + ret = vidcom(av7110, VIDEO_CMD_STOP, 0); + if (!ret) + ret = vidcom(av7110, VIDEO_CMD_SLOW, arg); + } + if (!ret) { + av7110->trickmode = TRICK_SLOW; + av7110->videostate.play_state = VIDEO_PLAYING; } - av7110->trickmode = TRICK_SLOW; - av7110->videostate.play_state = VIDEO_PLAYING; break; case VIDEO_GET_CAPABILITIES: @@ -1136,18 +1163,21 @@ static int dvb_video_ioctl(struct inode *inode, struct file *file, av7110_ipack_reset(&av7110->ipack[1]); if (av7110->playing == RP_AV) { - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, - __Play, 2, AV_PES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Play, 2, AV_PES, 0); + if (ret) + break; if (av7110->trickmode == TRICK_FAST) - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, - __Scan_I, 2, AV_PES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Scan_I, 2, AV_PES, 0); if (av7110->trickmode == TRICK_SLOW) { - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, - __Slow, 2, 0, 0); - vidcom(av7110, VIDEO_CMD_SLOW, arg); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Slow, 2, 0, 0); + if (!ret) + ret = vidcom(av7110, VIDEO_CMD_SLOW, arg); } if (av7110->trickmode == TRICK_FREEZE) - vidcom(av7110, VIDEO_CMD_STOP, 1); + ret = vidcom(av7110, VIDEO_CMD_STOP, 1); } break; @@ -1170,7 +1200,7 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file, unsigned long arg = (unsigned long) parg; int ret = 0; - dprintk(2, "av7110:%p, \n", av7110); + dprintk(1, "av7110:%p, cmd=%04x\n", av7110,cmd); if (((file->f_flags & O_ACCMODE) == O_RDONLY) && (cmd != AUDIO_GET_STATUS)) @@ -1179,28 +1209,32 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file, switch (cmd) { case AUDIO_STOP: if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY) - av7110_av_stop(av7110, RP_AUDIO); + ret = av7110_av_stop(av7110, RP_AUDIO); else - audcom(av7110, AUDIO_CMD_MUTE); - av7110->audiostate.play_state = AUDIO_STOPPED; + ret = audcom(av7110, AUDIO_CMD_MUTE); + if (!ret) + av7110->audiostate.play_state = AUDIO_STOPPED; break; case AUDIO_PLAY: if (av7110->audiostate.stream_source == AUDIO_SOURCE_MEMORY) - av7110_av_start_play(av7110, RP_AUDIO); - audcom(av7110, AUDIO_CMD_UNMUTE); - av7110->audiostate.play_state = AUDIO_PLAYING; + ret = av7110_av_start_play(av7110, RP_AUDIO); + if (!ret) + ret = audcom(av7110, AUDIO_CMD_UNMUTE); + if (!ret) + av7110->audiostate.play_state = AUDIO_PLAYING; break; case AUDIO_PAUSE: - audcom(av7110, AUDIO_CMD_MUTE); - av7110->audiostate.play_state = AUDIO_PAUSED; + ret = audcom(av7110, AUDIO_CMD_MUTE); + if (!ret) + av7110->audiostate.play_state = AUDIO_PAUSED; break; case AUDIO_CONTINUE: if (av7110->audiostate.play_state == AUDIO_PAUSED) { av7110->audiostate.play_state = AUDIO_PLAYING; - audcom(av7110, AUDIO_CMD_MUTE | AUDIO_CMD_PCM16); + ret = audcom(av7110, AUDIO_CMD_UNMUTE | AUDIO_CMD_PCM16); } break; @@ -1210,14 +1244,15 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file, case AUDIO_SET_MUTE: { - audcom(av7110, arg ? AUDIO_CMD_MUTE : AUDIO_CMD_UNMUTE); - av7110->audiostate.mute_state = (int) arg; + ret = audcom(av7110, arg ? AUDIO_CMD_MUTE : AUDIO_CMD_UNMUTE); + if (!ret) + av7110->audiostate.mute_state = (int) arg; break; } case AUDIO_SET_AV_SYNC: av7110->audiostate.AV_sync_state = (int) arg; - audcom(av7110, arg ? AUDIO_CMD_SYNC_ON : AUDIO_CMD_SYNC_OFF); + ret = audcom(av7110, arg ? AUDIO_CMD_SYNC_ON : AUDIO_CMD_SYNC_OFF); break; case AUDIO_SET_BYPASS_MODE: @@ -1229,21 +1264,24 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file, switch(av7110->audiostate.channel_select) { case AUDIO_STEREO: - audcom(av7110, AUDIO_CMD_STEREO); - if (av7110->adac_type == DVB_ADAC_CRYSTAL) - i2c_writereg(av7110, 0x20, 0x02, 0x49); + ret = audcom(av7110, AUDIO_CMD_STEREO); + if (!ret) + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x49); break; case AUDIO_MONO_LEFT: - audcom(av7110, AUDIO_CMD_MONO_L); - if (av7110->adac_type == DVB_ADAC_CRYSTAL) - i2c_writereg(av7110, 0x20, 0x02, 0x4a); + ret = audcom(av7110, AUDIO_CMD_MONO_L); + if (!ret) + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x4a); break; case AUDIO_MONO_RIGHT: - audcom(av7110, AUDIO_CMD_MONO_R); - if (av7110->adac_type == DVB_ADAC_CRYSTAL) - i2c_writereg(av7110, 0x20, 0x02, 0x45); + ret = audcom(av7110, AUDIO_CMD_MONO_R); + if (!ret) + if (av7110->adac_type == DVB_ADAC_CRYSTAL) + i2c_writereg(av7110, 0x20, 0x02, 0x45); break; default: @@ -1264,8 +1302,8 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file, dvb_ringbuffer_flush_spinlock_wakeup(&av7110->aout); av7110_ipack_reset(&av7110->ipack[0]); if (av7110->playing == RP_AV) - av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, - __Play, 2, AV_PES, 0); + ret = av7110_fw_cmd(av7110, COMTYPE_REC_PLAY, + __Play, 2, AV_PES, 0); break; case AUDIO_SET_ID: @@ -1274,7 +1312,7 @@ static int dvb_audio_ioctl(struct inode *inode, struct file *file, { struct audio_mixer *amix = (struct audio_mixer *)parg; - av7110_set_volume(av7110, amix->volume_left, amix->volume_right); + ret = av7110_set_volume(av7110, amix->volume_left, amix->volume_right); break; } case AUDIO_SET_STREAMTYPE: diff --git a/drivers/media/dvb/ttpci/av7110_av.h b/drivers/media/dvb/ttpci/av7110_av.h index cc5e7a7e87c3..45dc144b8b43 100644 --- a/drivers/media/dvb/ttpci/av7110_av.h +++ b/drivers/media/dvb/ttpci/av7110_av.h @@ -3,14 +3,14 @@ struct av7110; -extern void av7110_set_vidmode(struct av7110 *av7110, int mode); +extern int av7110_set_vidmode(struct av7110 *av7110, int mode); extern int av7110_record_cb(struct dvb_filter_pes2ts *p2t, u8 *buf, size_t len); extern int av7110_pes_play(void *dest, struct dvb_ringbuffer *buf, int dlen); extern int av7110_write_to_decoder(struct dvb_demux_feed *feed, const u8 *buf, size_t len); extern int av7110_set_volume(struct av7110 *av7110, int volleft, int volright); -extern void av7110_av_stop(struct av7110 *av7110, int av); +extern int av7110_av_stop(struct av7110 *av7110, int av); extern int av7110_av_start_record(struct av7110 *av7110, int av, struct dvb_demux_feed *dvbdmxfeed); extern int av7110_av_start_play(struct av7110 *av7110, int av); diff --git a/drivers/media/dvb/ttpci/av7110_hw.c b/drivers/media/dvb/ttpci/av7110_hw.c index 7fa4a0ebe133..1220826696c5 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.c +++ b/drivers/media/dvb/ttpci/av7110_hw.c @@ -137,7 +137,7 @@ static int waitdebi(struct av7110 *av7110, int adr, int state) return 0; udelay(5); } - return -1; + return -ETIMEDOUT; } static int load_dram(struct av7110 *av7110, u32 *data, int len) @@ -155,7 +155,7 @@ static int load_dram(struct av7110 *av7110, u32 *data, int len) for (i = 0; i < blocks; i++) { if (waitdebi(av7110, BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) { printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at block %d\n", i); - return -1; + return -ETIMEDOUT; } dprintk(4, "writing DRAM block %d\n", i); mwdebi(av7110, DEBISWAB, bootblock, @@ -170,7 +170,7 @@ static int load_dram(struct av7110 *av7110, u32 *data, int len) if (rest > 0) { if (waitdebi(av7110, BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) { printk(KERN_ERR "dvb-ttpci: load_dram(): timeout at last block\n"); - return -1; + return -ETIMEDOUT; } if (rest > 4) mwdebi(av7110, DEBISWAB, bootblock, @@ -185,13 +185,13 @@ static int load_dram(struct av7110 *av7110, u32 *data, int len) } if (waitdebi(av7110, BOOT_STATE, BOOTSTATE_BUFFER_EMPTY) < 0) { printk(KERN_ERR "dvb-ttpci: load_dram(): timeout after last block\n"); - return -1; + return -ETIMEDOUT; } iwdebi(av7110, DEBINOSWAP, BOOT_SIZE, 0, 2); iwdebi(av7110, DEBINOSWAP, BOOT_STATE, BOOTSTATE_BUFFER_FULL, 2); if (waitdebi(av7110, BOOT_STATE, BOOTSTATE_BOOT_COMPLETE) < 0) { printk(KERN_ERR "dvb-ttpci: load_dram(): final handshake timeout\n"); - return -1; + return -ETIMEDOUT; } return 0; } @@ -263,7 +263,7 @@ int av7110_bootarm(struct av7110 *av7110) if (saa7146_wait_for_debi_done(av7110->dev, 1)) { printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): " "saa7146_wait_for_debi_done() timed out\n"); - return -1; + return -ETIMEDOUT; } saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI); mdelay(1); @@ -284,7 +284,7 @@ int av7110_bootarm(struct av7110 *av7110) if (saa7146_wait_for_debi_done(av7110->dev, 1)) { printk(KERN_ERR "dvb-ttpci: av7110_bootarm(): " "saa7146_wait_for_debi_done() timed out after loading DRAM\n"); - return -1; + return -ETIMEDOUT; } saa7146_setgpio(dev, RESET_LINE, SAA7146_GPIO_OUTHI); msleep(30); /* the firmware needs some time to initialize */ @@ -308,6 +308,7 @@ int av7110_wait_msgstate(struct av7110 *av7110, u16 flags) { unsigned long start; u32 stat; + int err; if (FW_VERSION(av7110->arm_app) <= 0x261c) { /* not supported by old firmware */ @@ -318,17 +319,17 @@ int av7110_wait_msgstate(struct av7110 *av7110, u16 flags) /* new firmware */ start = jiffies; for (;;) { + err = time_after(jiffies, start + ARM_WAIT_FREE); if (down_interruptible(&av7110->dcomlock)) return -ERESTARTSYS; stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); up(&av7110->dcomlock); - if ((stat & flags) == 0) { + if ((stat & flags) == 0) break; - } - if (time_after(jiffies, start + ARM_WAIT_FREE)) { + if (err) { printk(KERN_ERR "%s: timeout waiting for MSGSTATE %04x\n", __FUNCTION__, stat & flags); - return -1; + return -ETIMEDOUT; } msleep(1); } @@ -342,6 +343,7 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) char *type = NULL; u16 flags[2] = {0, 0}; u32 stat; + int err; // dprintk(4, "%p\n", av7110); @@ -351,24 +353,30 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) } start = jiffies; - while (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2 )) { - msleep(1); - if (time_after(jiffies, start + ARM_WAIT_FREE)) { + while (1) { + err = time_after(jiffies, start + ARM_WAIT_FREE); + if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0) + break; + if (err) { printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND idle\n", __FUNCTION__); return -ETIMEDOUT; } + msleep(1); } wdebi(av7110, DEBINOSWAP, COM_IF_LOCK, 0xffff, 2); #ifndef _NOHANDSHAKE start = jiffies; - while (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2 )) { - msleep(1); - if (time_after(jiffies, start + ARM_WAIT_SHAKE)) { + while (1) { + err = time_after(jiffies, start + ARM_WAIT_SHAKE); + if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0) + break; + if (err) { printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for HANDSHAKE_REG\n", __FUNCTION__); return -ETIMEDOUT; } + msleep(1); } #endif @@ -401,6 +409,7 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) /* non-immediate COMMAND type */ start = jiffies; for (;;) { + err = time_after(jiffies, start + ARM_WAIT_FREE); stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); if (stat & flags[0]) { printk(KERN_ERR "%s: %s QUEUE overflow\n", @@ -409,10 +418,10 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) } if ((stat & flags[1]) == 0) break; - if (time_after(jiffies, start + ARM_WAIT_FREE)) { + if (err) { printk(KERN_ERR "%s: timeout waiting on busy %s QUEUE\n", __FUNCTION__, type); - return -1; + return -ETIMEDOUT; } msleep(1); } @@ -432,13 +441,16 @@ static int __av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) #ifdef COM_DEBUG start = jiffies; - while (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2 )) { - msleep(1); - if (time_after(jiffies, start + ARM_WAIT_FREE)) { - printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND to complete\n", - __FUNCTION__); + while (1) { + err = time_after(jiffies, start + ARM_WAIT_FREE); + if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0) + break; + if (err) { + printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for COMMAND %d to complete\n", + __FUNCTION__, (buf[0] >> 8) & 0xff); return -ETIMEDOUT; } + msleep(1); } stat = rdebi(av7110, DEBINOSWAP, MSGSTATE, 0, 2); @@ -470,7 +482,7 @@ static int av7110_send_fw_cmd(struct av7110 *av7110, u16* buf, int length) ret = __av7110_send_fw_cmd(av7110, buf, length); up(&av7110->dcomlock); - if (ret) + if (ret && ret!=-ERESTARTSYS) printk(KERN_ERR "dvb-ttpci: %s(): av7110_send_fw_cmd error %d\n", __FUNCTION__, ret); return ret; @@ -495,7 +507,7 @@ int av7110_fw_cmd(struct av7110 *av7110, int type, int com, int num, ...) } ret = av7110_send_fw_cmd(av7110, buf, num + 2); - if (ret) + if (ret && ret != -ERESTARTSYS) printk(KERN_ERR "dvb-ttpci: av7110_fw_cmd error %d\n", ret); return ret; } @@ -518,7 +530,7 @@ int av7110_send_ci_cmd(struct av7110 *av7110, u8 subcom, u8 *buf, u8 len) } ret = av7110_send_fw_cmd(av7110, cmd, 18); - if (ret) + if (ret && ret != -ERESTARTSYS) printk(KERN_ERR "dvb-ttpci: av7110_send_ci_cmd error %d\n", ret); return ret; } @@ -551,26 +563,32 @@ int av7110_fw_request(struct av7110 *av7110, u16 *request_buf, } start = jiffies; - while (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2)) { -#ifdef _NOHANDSHAKE - msleep(1); -#endif - if (time_after(jiffies, start + ARM_WAIT_FREE)) { + while (1) { + err = time_after(jiffies, start + ARM_WAIT_FREE); + if (rdebi(av7110, DEBINOSWAP, COMMAND, 0, 2) == 0) + break; + if (err) { printk(KERN_ERR "%s: timeout waiting for COMMAND to complete\n", __FUNCTION__); up(&av7110->dcomlock); - return -1; + return -ETIMEDOUT; } +#ifdef _NOHANDSHAKE + msleep(1); +#endif } #ifndef _NOHANDSHAKE start = jiffies; - while (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2 )) { - msleep(1); - if (time_after(jiffies, start + ARM_WAIT_SHAKE)) { + while (1) { + err = time_after(jiffies, start + ARM_WAIT_SHAKE); + if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0) + break; + if (err) { printk(KERN_ERR "%s: timeout waiting for HANDSHAKE_REG\n", __FUNCTION__); up(&av7110->dcomlock); - return -1; + return -ETIMEDOUT; } + msleep(1); } #endif @@ -667,10 +685,10 @@ int av7110_diseqc_send(struct av7110 *av7110, int len, u8 *msg, unsigned long bu for (i = 0; i < len; i++) buf[i + 4] = msg[i]; - if ((ret = av7110_send_fw_cmd(av7110, buf, 18))) + ret = av7110_send_fw_cmd(av7110, buf, 18); + if (ret && ret!=-ERESTARTSYS) printk(KERN_ERR "dvb-ttpci: av7110_diseqc_send error %d\n", ret); - - return 0; + return ret; } @@ -705,18 +723,22 @@ static inline int SetFont(struct av7110 *av7110, u8 windownr, u8 fontsize, static int FlushText(struct av7110 *av7110) { unsigned long start; + int err; if (down_interruptible(&av7110->dcomlock)) return -ERESTARTSYS; start = jiffies; - while (rdebi(av7110, DEBINOSWAP, BUFF1_BASE, 0, 2)) { - msleep(1); - if (time_after(jiffies, start + ARM_WAIT_OSD)) { + while (1) { + err = time_after(jiffies, start + ARM_WAIT_OSD); + if (rdebi(av7110, DEBINOSWAP, BUFF1_BASE, 0, 2) == 0) + break; + if (err) { printk(KERN_ERR "dvb-ttpci: %s(): timeout waiting for BUFF1_BASE == 0\n", __FUNCTION__); up(&av7110->dcomlock); - return -1; + return -ETIMEDOUT; } + msleep(1); } up(&av7110->dcomlock); return 0; @@ -733,25 +755,31 @@ static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, u8* buf) return -ERESTARTSYS; start = jiffies; - while (rdebi(av7110, DEBINOSWAP, BUFF1_BASE, 0, 2)) { - msleep(1); - if (time_after(jiffies, start + ARM_WAIT_OSD)) { + while (1) { + ret = time_after(jiffies, start + ARM_WAIT_OSD); + if (rdebi(av7110, DEBINOSWAP, BUFF1_BASE, 0, 2) == 0) + break; + if (ret) { printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for BUFF1_BASE == 0\n", __FUNCTION__); up(&av7110->dcomlock); - return -1; + return -ETIMEDOUT; } + msleep(1); } #ifndef _NOHANDSHAKE start = jiffies; - while (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2)) { - msleep(1); - if (time_after(jiffies, start + ARM_WAIT_SHAKE)) { + while (1) { + ret = time_after(jiffies, start + ARM_WAIT_SHAKE); + if (rdebi(av7110, DEBINOSWAP, HANDSHAKE_REG, 0, 2) == 0) + break; + if (ret) { printk(KERN_ERR "dvb-ttpci: %s: timeout waiting for HANDSHAKE_REG\n", __FUNCTION__); up(&av7110->dcomlock); - return -1; + return -ETIMEDOUT; } + msleep(1); } #endif for (i = 0; i < length / 2; i++) @@ -761,7 +789,7 @@ static int WriteText(struct av7110 *av7110, u8 win, u16 x, u16 y, u8* buf) wdebi(av7110, DEBINOSWAP, BUFF1_BASE + i * 2, 0, 2); ret = __av7110_send_fw_cmd(av7110, cbuf, 5); up(&av7110->dcomlock); - if (ret) + if (ret && ret!=-ERESTARTSYS) printk(KERN_ERR "dvb-ttpci: WriteText error %d\n", ret); return ret; } @@ -816,9 +844,25 @@ static osd_raw_window_t bpp2bit[8] = { OSD_BITMAP1, OSD_BITMAP2, 0, OSD_BITMAP4, 0, 0, 0, OSD_BITMAP8 }; -static inline int LoadBitmap(struct av7110 *av7110, u16 format, +static inline int WaitUntilBmpLoaded(struct av7110 *av7110) +{ + int ret = wait_event_interruptible_timeout(av7110->bmpq, + av7110->bmp_state != BMP_LOADING, 10*HZ); + if (ret == -ERESTARTSYS) + return ret; + if (ret == 0) { + printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n", + ret, av7110->bmp_state); + av7110->bmp_state = BMP_NONE; + return -ETIMEDOUT; + } + return 0; +} + +static inline int LoadBitmap(struct av7110 *av7110, u16 dx, u16 dy, int inc, u8 __user * data) { + u16 format; int bpp; int i; int d, delta; @@ -827,14 +871,7 @@ static inline int LoadBitmap(struct av7110 *av7110, u16 format, dprintk(4, "%p\n", av7110); - ret = wait_event_interruptible_timeout(av7110->bmpq, av7110->bmp_state != BMP_LOADING, HZ); - if (ret == -ERESTARTSYS || ret == 0) { - printk("dvb-ttpci: warning: timeout waiting in LoadBitmap: %d, %d\n", - ret, av7110->bmp_state); - av7110->bmp_state = BMP_NONE; - return -1; - } - BUG_ON (av7110->bmp_state == BMP_LOADING); + format = bpp2bit[av7110->osdbpp[av7110->osdwin]]; av7110->bmp_state = BMP_LOADING; if (format == OSD_BITMAP8) { @@ -847,18 +884,18 @@ static inline int LoadBitmap(struct av7110 *av7110, u16 format, bpp=1; delta = 8; } else { av7110->bmp_state = BMP_NONE; - return -1; + return -EINVAL; } av7110->bmplen = ((dx * dy * bpp + 7) & ~7) / 8; av7110->bmpp = 0; if (av7110->bmplen > 32768) { av7110->bmp_state = BMP_NONE; - return -1; + return -EINVAL; } for (i = 0; i < dy; i++) { if (copy_from_user(av7110->bmpbuf + 1024 + i * dx, data + i * inc, dx)) { av7110->bmp_state = BMP_NONE; - return -1; + return -EINVAL; } } if (format != OSD_BITMAP8) { @@ -873,37 +910,27 @@ static inline int LoadBitmap(struct av7110 *av7110, u16 format, } av7110->bmplen += 1024; dprintk(4, "av7110_fw_cmd: LoadBmp size %d\n", av7110->bmplen); - return av7110_fw_cmd(av7110, COMTYPE_OSD, LoadBmp, 3, format, dx, dy); + ret = av7110_fw_cmd(av7110, COMTYPE_OSD, LoadBmp, 3, format, dx, dy); + if (!ret) + ret = WaitUntilBmpLoaded(av7110); + return ret; } -static int BlitBitmap(struct av7110 *av7110, u16 win, u16 x, u16 y, u16 trans) +static int BlitBitmap(struct av7110 *av7110, u16 x, u16 y) { - int ret; - dprintk(4, "%p\n", av7110); - BUG_ON (av7110->bmp_state == BMP_NONE); - - ret = wait_event_interruptible_timeout(av7110->bmpq, - av7110->bmp_state != BMP_LOADING, 10*HZ); - if (ret == -ERESTARTSYS || ret == 0) { - printk("dvb-ttpci: warning: timeout waiting in BlitBitmap: %d, %d\n", - ret, av7110->bmp_state); - av7110->bmp_state = BMP_NONE; - return (ret == 0) ? -ETIMEDOUT : ret; - } - - BUG_ON (av7110->bmp_state != BMP_LOADED); - - return av7110_fw_cmd(av7110, COMTYPE_OSD, BlitBmp, 4, win, x, y, trans); + return av7110_fw_cmd(av7110, COMTYPE_OSD, BlitBmp, 4, av7110->osdwin, x, y, 0); } static inline int ReleaseBitmap(struct av7110 *av7110) { dprintk(4, "%p\n", av7110); - if (av7110->bmp_state != BMP_LOADED) + if (av7110->bmp_state != BMP_LOADED && FW_VERSION(av7110->arm_app) < 0x261e) return -1; + if (av7110->bmp_state == BMP_LOADING) + dprintk(1,"ReleaseBitmap called while BMP_LOADING\n"); av7110->bmp_state = BMP_NONE; return av7110_fw_cmd(av7110, COMTYPE_OSD, ReleaseBmp, 0); } @@ -924,18 +951,22 @@ static u32 RGB2YUV(u16 R, u16 G, u16 B) return Cr | (Cb << 16) | (Y << 8); } -static void OSDSetColor(struct av7110 *av7110, u8 color, u8 r, u8 g, u8 b, u8 blend) +static int OSDSetColor(struct av7110 *av7110, u8 color, u8 r, u8 g, u8 b, u8 blend) { + int ret; + u16 ch, cl; u32 yuv; yuv = blend ? RGB2YUV(r,g,b) : 0; cl = (yuv & 0xffff); ch = ((yuv >> 16) & 0xffff); - SetColor_(av7110, av7110->osdwin, bpp2pal[av7110->osdbpp[av7110->osdwin]], - color, ch, cl); - SetBlend_(av7110, av7110->osdwin, bpp2pal[av7110->osdbpp[av7110->osdwin]], - color, ((blend >> 4) & 0x0f)); + ret = SetColor_(av7110, av7110->osdwin, bpp2pal[av7110->osdbpp[av7110->osdwin]], + color, ch, cl); + if (!ret) + ret = SetBlend_(av7110, av7110->osdwin, bpp2pal[av7110->osdbpp[av7110->osdwin]], + color, ((blend >> 4) & 0x0f)); + return ret; } static int OSDSetPalette(struct av7110 *av7110, u32 __user * colors, u8 first, u8 last) @@ -968,14 +999,14 @@ static int OSDSetBlock(struct av7110 *av7110, int x0, int y0, { uint w, h, bpp, bpl, size, lpb, bnum, brest; int i; - int rc; + int rc,release_rc; w = x1 - x0 + 1; h = y1 - y0 + 1; if (inc <= 0) inc = w; if (w <= 0 || w > 720 || h <= 0 || h > 576) - return -1; + return -EINVAL; bpp = av7110->osdbpp[av7110->osdwin] + 1; bpl = ((w * bpp + 7) & ~7) / 8; size = h * bpl; @@ -983,176 +1014,186 @@ static int OSDSetBlock(struct av7110 *av7110, int x0, int y0, bnum = size / (lpb * bpl); brest = size - bnum * lpb * bpl; - for (i = 0; i < bnum; i++) { - rc = LoadBitmap(av7110, bpp2bit[av7110->osdbpp[av7110->osdwin]], - w, lpb, inc, data); - if (rc) - return rc; - rc = BlitBitmap(av7110, av7110->osdwin, x0, y0 + i * lpb, 0); + if (av7110->bmp_state == BMP_LOADING) { + /* possible if syscall is repeated by -ERESTARTSYS and if firmware cannot abort */ + BUG_ON (FW_VERSION(av7110->arm_app) >= 0x261e); + rc = WaitUntilBmpLoaded(av7110); if (rc) return rc; - data += lpb * inc; + /* just continue. This should work for all fw versions + * if bnum==1 && !brest && LoadBitmap was successful + */ } - if (brest) { - rc = LoadBitmap(av7110, bpp2bit[av7110->osdbpp[av7110->osdwin]], - w, brest / bpl, inc, data); + + rc = 0; + for (i = 0; i < bnum; i++) { + rc = LoadBitmap(av7110, w, lpb, inc, data); if (rc) - return rc; - rc = BlitBitmap(av7110, av7110->osdwin, x0, y0 + bnum * lpb, 0); + break; + rc = BlitBitmap(av7110, x0, y0 + i * lpb); if (rc) - return rc; + break; + data += lpb * inc; } - ReleaseBitmap(av7110); - return 0; + if (!rc && brest) { + rc = LoadBitmap(av7110, w, brest / bpl, inc, data); + if (!rc) + rc = BlitBitmap(av7110, x0, y0 + bnum * lpb); + } + release_rc = ReleaseBitmap(av7110); + if (!rc) + rc = release_rc; + if (rc) + dprintk(1,"returns %d\n",rc); + return rc; } int av7110_osd_cmd(struct av7110 *av7110, osd_cmd_t *dc) { int ret; - ret = down_interruptible(&av7110->osd_sema); - if (ret) + if (down_interruptible(&av7110->osd_sema)) return -ERESTARTSYS; - /* stupid, but OSD functions don't provide a return code anyway */ - ret = 0; - switch (dc->cmd) { case OSD_Close: - DestroyOSDWindow(av7110, av7110->osdwin); - goto out; + ret = DestroyOSDWindow(av7110, av7110->osdwin); + break; case OSD_Open: av7110->osdbpp[av7110->osdwin] = (dc->color - 1) & 7; - CreateOSDWindow(av7110, av7110->osdwin, + ret = CreateOSDWindow(av7110, av7110->osdwin, bpp2bit[av7110->osdbpp[av7110->osdwin]], dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1); + if (ret) + break; if (!dc->data) { - MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); - SetColorBlend(av7110, av7110->osdwin); + ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); + if (ret) + break; + ret = SetColorBlend(av7110, av7110->osdwin); } - goto out; + break; case OSD_Show: - MoveWindowRel(av7110, av7110->osdwin, 0, 0); - goto out; + ret = MoveWindowRel(av7110, av7110->osdwin, 0, 0); + break; case OSD_Hide: - HideWindow(av7110, av7110->osdwin); - goto out; + ret = HideWindow(av7110, av7110->osdwin); + break; case OSD_Clear: - DrawBlock(av7110, av7110->osdwin, 0, 0, 720, 576, 0); - goto out; + ret = DrawBlock(av7110, av7110->osdwin, 0, 0, 720, 576, 0); + break; case OSD_Fill: - DrawBlock(av7110, av7110->osdwin, 0, 0, 720, 576, dc->color); - goto out; + ret = DrawBlock(av7110, av7110->osdwin, 0, 0, 720, 576, dc->color); + break; case OSD_SetColor: - OSDSetColor(av7110, dc->color, dc->x0, dc->y0, dc->x1, dc->y1); - goto out; + ret = OSDSetColor(av7110, dc->color, dc->x0, dc->y0, dc->x1, dc->y1); + break; case OSD_SetPalette: - { - if (FW_VERSION(av7110->arm_app) >= 0x2618) { + if (FW_VERSION(av7110->arm_app) >= 0x2618) ret = OSDSetPalette(av7110, dc->data, dc->color, dc->x0); - goto out; - } else { + else { int i, len = dc->x0-dc->color+1; u8 __user *colors = (u8 __user *)dc->data; u8 r, g, b, blend; - + ret = 0; for (i = 0; i<len; i++) { if (get_user(r, colors + i * 4) || get_user(g, colors + i * 4 + 1) || get_user(b, colors + i * 4 + 2) || get_user(blend, colors + i * 4 + 3)) { ret = -EFAULT; - goto out; + break; } - OSDSetColor(av7110, dc->color + i, r, g, b, blend); + ret = OSDSetColor(av7110, dc->color + i, r, g, b, blend); + if (ret) + break; } } - ret = 0; - goto out; - } - case OSD_SetTrans: - goto out; + break; case OSD_SetPixel: - DrawLine(av7110, av7110->osdwin, + ret = DrawLine(av7110, av7110->osdwin, dc->x0, dc->y0, 0, 0, dc->color); - goto out; - case OSD_GetPixel: - goto out; + break; case OSD_SetRow: dc->y1 = dc->y0; /* fall through */ case OSD_SetBlock: ret = OSDSetBlock(av7110, dc->x0, dc->y0, dc->x1, dc->y1, dc->color, dc->data); - goto out; + break; case OSD_FillRow: - DrawBlock(av7110, av7110->osdwin, dc->x0, dc->y0, + ret = DrawBlock(av7110, av7110->osdwin, dc->x0, dc->y0, dc->x1-dc->x0+1, dc->y1, dc->color); - goto out; + break; case OSD_FillBlock: - DrawBlock(av7110, av7110->osdwin, dc->x0, dc->y0, + ret = DrawBlock(av7110, av7110->osdwin, dc->x0, dc->y0, dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1, dc->color); - goto out; + break; case OSD_Line: - DrawLine(av7110, av7110->osdwin, + ret = DrawLine(av7110, av7110->osdwin, dc->x0, dc->y0, dc->x1 - dc->x0, dc->y1 - dc->y0, dc->color); - goto out; - case OSD_Query: - goto out; - case OSD_Test: - goto out; + break; case OSD_Text: { char textbuf[240]; if (strncpy_from_user(textbuf, dc->data, 240) < 0) { ret = -EFAULT; - goto out; + break; } textbuf[239] = 0; if (dc->x1 > 3) dc->x1 = 3; - SetFont(av7110, av7110->osdwin, dc->x1, + ret = SetFont(av7110, av7110->osdwin, dc->x1, (u16) (dc->color & 0xffff), (u16) (dc->color >> 16)); - FlushText(av7110); - WriteText(av7110, av7110->osdwin, dc->x0, dc->y0, textbuf); - goto out; + if (!ret) + ret = FlushText(av7110); + if (!ret) + ret = WriteText(av7110, av7110->osdwin, dc->x0, dc->y0, textbuf); + break; } case OSD_SetWindow: - if (dc->x0 < 1 || dc->x0 > 7) { + if (dc->x0 < 1 || dc->x0 > 7) ret = -EINVAL; - goto out; + else { + av7110->osdwin = dc->x0; + ret = 0; } - av7110->osdwin = dc->x0; - goto out; + break; case OSD_MoveWindow: - MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); - SetColorBlend(av7110, av7110->osdwin); - goto out; + ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); + if (!ret) + ret = SetColorBlend(av7110, av7110->osdwin); + break; case OSD_OpenRaw: if (dc->color < OSD_BITMAP1 || dc->color > OSD_CURSOR) { ret = -EINVAL; - goto out; + break; } - if (dc->color >= OSD_BITMAP1 && dc->color <= OSD_BITMAP8HR) { + if (dc->color >= OSD_BITMAP1 && dc->color <= OSD_BITMAP8HR) av7110->osdbpp[av7110->osdwin] = (1 << (dc->color & 3)) - 1; - } - else { + else av7110->osdbpp[av7110->osdwin] = 0; - } - CreateOSDWindow(av7110, av7110->osdwin, (osd_raw_window_t)dc->color, + ret = CreateOSDWindow(av7110, av7110->osdwin, (osd_raw_window_t)dc->color, dc->x1 - dc->x0 + 1, dc->y1 - dc->y0 + 1); + if (ret) + break; if (!dc->data) { - MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); - SetColorBlend(av7110, av7110->osdwin); + ret = MoveWindowAbs(av7110, av7110->osdwin, dc->x0, dc->y0); + if (!ret) + ret = SetColorBlend(av7110, av7110->osdwin); } - goto out; + break; default: ret = -EINVAL; - goto out; + break; } -out: up(&av7110->osd_sema); + if (ret==-ERESTARTSYS) + dprintk(1, "av7110_osd_cmd(%d) returns with -ERESTARTSYS\n",dc->cmd); + else if (ret) + dprintk(1, "av7110_osd_cmd(%d) returns with %d\n",dc->cmd,ret); + return ret; } diff --git a/drivers/media/dvb/ttpci/av7110_hw.h b/drivers/media/dvb/ttpci/av7110_hw.h index 52061e17c6dd..fedd20f9815d 100644 --- a/drivers/media/dvb/ttpci/av7110_hw.h +++ b/drivers/media/dvb/ttpci/av7110_hw.h @@ -458,27 +458,27 @@ static inline int SendDAC(struct av7110 *av7110, u8 addr, u8 data) return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, AudioDAC, 2, addr, data); } -static inline void av7710_set_video_mode(struct av7110 *av7110, int mode) +static inline int av7710_set_video_mode(struct av7110 *av7110, int mode) { - av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetVidMode, 1, mode); + return av7110_fw_cmd(av7110, COMTYPE_ENCODER, SetVidMode, 1, mode); } -static int inline vidcom(struct av7110 *av7110, u32 com, u32 arg) +static inline int vidcom(struct av7110 *av7110, u32 com, u32 arg) { return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_VIDEO_COMMAND, 4, (com>>16), (com&0xffff), (arg>>16), (arg&0xffff)); } -static int inline audcom(struct av7110 *av7110, u32 com) +static inline int audcom(struct av7110 *av7110, u32 com) { return av7110_fw_cmd(av7110, COMTYPE_MISC, AV7110_FW_AUDIO_COMMAND, 2, (com>>16), (com&0xffff)); } -static inline void Set22K(struct av7110 *av7110, int state) +static inline int Set22K(struct av7110 *av7110, int state) { - av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, (state ? ON22K : OFF22K), 0); + return av7110_fw_cmd(av7110, COMTYPE_AUDIODAC, (state ? ON22K : OFF22K), 0); } diff --git a/drivers/media/dvb/ttpci/av7110_ipack.c b/drivers/media/dvb/ttpci/av7110_ipack.c index 246640741888..699ef8b5b99a 100644 --- a/drivers/media/dvb/ttpci/av7110_ipack.c +++ b/drivers/media/dvb/ttpci/av7110_ipack.c @@ -24,7 +24,7 @@ int av7110_ipack_init(struct ipack *p, int size, void (*func)(u8 *buf, int size, void *priv)) { if (!(p->buf = vmalloc(size*sizeof(u8)))) { - printk ("Couldn't allocate memory for ipack\n"); + printk(KERN_WARNING "Couldn't allocate memory for ipack\n"); return -ENOMEM; } p->size = size; diff --git a/drivers/media/dvb/ttpci/budget-av.c b/drivers/media/dvb/ttpci/budget-av.c index 6e0f5d307c52..9746d2bb916f 100644 --- a/drivers/media/dvb/ttpci/budget-av.c +++ b/drivers/media/dvb/ttpci/budget-av.c @@ -570,9 +570,9 @@ static int philips_cu1216_pll_set(struct dvb_frontend *fe, struct dvb_frontend_p buf[0] = (div >> 8) & 0x7f; buf[1] = div & 0xff; - buf[2] = 0x8e; - buf[3] = (params->frequency < 174500000 ? 0xa1 : - params->frequency < 454000000 ? 0x92 : 0x34); + buf[2] = 0x86; + buf[3] = (params->frequency < 150000000 ? 0x01 : + params->frequency < 445000000 ? 0x02 : 0x04); if (i2c_transfer(&budget->i2c_adap, &msg, 1) != 1) return -EIO; @@ -695,8 +695,12 @@ static struct tda1004x_config philips_tu1216_config = { .demod_address = 0x8, .invert = 1, .invert_oclk = 1, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, .pll_init = philips_tu1216_pll_init, .pll_set = philips_tu1216_pll_set, + .pll_sleep = NULL, .request_firmware = philips_tu1216_request_firmware, }; @@ -1018,7 +1022,7 @@ static struct pci_device_id pci_tbl[] = { MODULE_DEVICE_TABLE(pci, pci_tbl); static struct saa7146_extension budget_extension = { - .name = "budget dvb /w video in\0", + .name = "budget_av", .pci_tbl = pci_tbl, .module = THIS_MODULE, diff --git a/drivers/media/dvb/ttpci/budget-ci.c b/drivers/media/dvb/ttpci/budget-ci.c index dce116111376..a1267054bc01 100644 --- a/drivers/media/dvb/ttpci/budget-ci.c +++ b/drivers/media/dvb/ttpci/budget-ci.c @@ -69,6 +69,7 @@ struct budget_ci { int slot_status; struct dvb_ca_en50221 ca; char ir_dev_name[50]; + u8 tuner_pll_address; /* used for philips_tdm1316l configs */ }; /* from reading the following remotes: @@ -723,7 +724,7 @@ static int philips_tdm1316l_pll_init(struct dvb_frontend *fe) struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; - struct i2c_msg tuner_msg = {.addr = 0x63,.flags = 0,.buf = td1316_init,.len = + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len = sizeof(td1316_init) }; // setup PLL configuration @@ -746,7 +747,7 @@ static int philips_tdm1316l_pll_set(struct dvb_frontend *fe, struct dvb_frontend { struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; u8 tuner_buf[4]; - struct i2c_msg tuner_msg = {.addr = 0x63,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; + struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; int tuner_frequency = 0; u8 band, cp, filter; @@ -838,8 +839,12 @@ static struct tda1004x_config philips_tdm1316l_config = { .demod_address = 0x8, .invert = 0, .invert_oclk = 0, + .xtal_freq = TDA10046_XTAL_4M, + .agc_config = TDA10046_AGC_DEFAULT, + .if_freq = TDA10046_FREQ_3617, .pll_init = philips_tdm1316l_pll_init, .pll_set = philips_tdm1316l_pll_set, + .pll_sleep = NULL, .request_firmware = philips_tdm1316l_request_firmware, }; @@ -865,12 +870,22 @@ static void frontend_init(struct budget_ci *budget_ci) break; case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) + budget_ci->tuner_pll_address = 0x63; budget_ci->budget.dvb_frontend = tda10045_attach(&philips_tdm1316l_config, &budget_ci->budget.i2c_adap); if (budget_ci->budget.dvb_frontend) { break; } break; + + case 0x1012: // Hauppauge/TT Nova-T CI budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) + budget_ci->tuner_pll_address = 0x60; + budget_ci->budget.dvb_frontend = + tda10046_attach(&philips_tdm1316l_config, &budget_ci->budget.i2c_adap); + if (budget_ci->budget.dvb_frontend) { + break; + } + break; } if (budget_ci->budget.dvb_frontend == NULL) { @@ -950,11 +965,13 @@ static struct saa7146_extension budget_extension; MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC); MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); +MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT); static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c), MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f), MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011), + MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012), { .vendor = 0, } diff --git a/drivers/media/dvb/ttpci/budget.c b/drivers/media/dvb/ttpci/budget.c index 083fd44e5f90..9961917e8a7f 100644 --- a/drivers/media/dvb/ttpci/budget.c +++ b/drivers/media/dvb/ttpci/budget.c @@ -40,6 +40,7 @@ #include "ves1820.h" #include "l64781.h" #include "tda8083.h" +#include "s5h1420.h" static void Set22K (struct budget *budget, int state) { @@ -177,6 +178,62 @@ static int budget_diseqc_send_burst(struct dvb_frontend* fe, fe_sec_mini_cmd_t m return 0; } +static int lnbp21_set_voltage(struct dvb_frontend* fe, fe_sec_voltage_t voltage) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + u8 buf; + struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) }; + + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + + switch(voltage) { + case SEC_VOLTAGE_13: + buf = (buf & 0xf7) | 0x04; + break; + + case SEC_VOLTAGE_18: + buf = (buf & 0xf7) | 0x0c; + break; + + case SEC_VOLTAGE_OFF: + buf = buf & 0xf0; + break; + } + + msg.flags = 0; + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + + return 0; +} + +static int lnbp21_enable_high_lnb_voltage(struct dvb_frontend* fe, int arg) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + u8 buf; + struct i2c_msg msg = { .addr = 0x08, .flags = I2C_M_RD, .buf = &buf, .len = sizeof(buf) }; + + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + + if (arg) { + buf = buf | 0x10; + } else { + buf = buf & 0xef; + } + + msg.flags = 0; + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + + return 0; +} + +static void lnbp21_init(struct budget* budget) +{ + u8 buf = 0x00; + struct i2c_msg msg = { .addr = 0x08, .flags = 0, .buf = &buf, .len = sizeof(buf) }; + + i2c_transfer (&budget->i2c_adap, &msg, 1); +} + static int alps_bsrv2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) { struct budget* budget = (struct budget*) fe->dvb->priv; @@ -395,6 +452,38 @@ static struct tda8083_config grundig_29504_451_config = { .pll_set = grundig_29504_451_pll_set, }; +static int s5h1420_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params, u32* freqout) +{ + struct budget* budget = (struct budget*) fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = params->frequency / 1000; + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0xc2; + + if (div < 1450) + data[3] = 0x00; + else if (div < 1850) + data[3] = 0x40; + else if (div < 2000) + data[3] = 0x80; + else + data[3] = 0xc0; + + if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; + + *freqout = div * 1000; + return 0; +} + +static struct s5h1420_config s5h1420_config = { + .demod_address = 0x53, + .pll_set = s5h1420_pll_set, +}; + static u8 read_pwm(struct budget* budget) { u8 b = 0xff; @@ -459,6 +548,15 @@ static void frontend_init(struct budget *budget) break; } break; + + case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) + budget->dvb_frontend = s5h1420_attach(&s5h1420_config, &budget->i2c_adap); + if (budget->dvb_frontend) { + budget->dvb_frontend->ops->set_voltage = lnbp21_set_voltage; + budget->dvb_frontend->ops->enable_high_lnb_voltage = lnbp21_enable_high_lnb_voltage; + lnbp21_init(budget); + break; + } } if (budget->dvb_frontend == NULL) { @@ -532,6 +630,7 @@ static struct pci_device_id pci_tbl[] = { MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), + MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), { diff --git a/drivers/media/dvb/ttusb-budget/Kconfig b/drivers/media/dvb/ttusb-budget/Kconfig index 4aa714ab4c28..c6c1d41a2efb 100644 --- a/drivers/media/dvb/ttusb-budget/Kconfig +++ b/drivers/media/dvb/ttusb-budget/Kconfig @@ -3,6 +3,7 @@ config DVB_TTUSB_BUDGET depends on DVB_CORE && USB select DVB_CX22700 select DVB_TDA1004X + select DVB_VES1820 select DVB_TDA8083 select DVB_STV0299 help diff --git a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c index afa0e7a0e506..aa43b5fcb8e7 100644 --- a/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c +++ b/drivers/media/dvb/ttusb-budget/dvb-ttusb-budget.c @@ -24,6 +24,7 @@ #include "dmxdev.h" #include "dvb_demux.h" #include "dvb_net.h" +#include "ves1820.h" #include "cx22700.h" #include "tda1004x.h" #include "stv0299.h" @@ -1367,6 +1368,47 @@ static struct tda8083_config ttusb_novas_grundig_29504_491_config = { .pll_set = ttusb_novas_grundig_29504_491_pll_set, }; +static int alps_tdbe2_pll_set(struct dvb_frontend* fe, struct dvb_frontend_parameters* params) +{ + struct ttusb* ttusb = fe->dvb->priv; + u32 div; + u8 data[4]; + struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; + + div = (params->frequency + 35937500 + 31250) / 62500; + + data[0] = (div >> 8) & 0x7f; + data[1] = div & 0xff; + data[2] = 0x85 | ((div >> 10) & 0x60); + data[3] = (params->frequency < 174000000 ? 0x88 : params->frequency < 470000000 ? 0x84 : 0x81); + + if (i2c_transfer (&ttusb->i2c_adap, &msg, 1) != 1) + return -EIO; + + return 0; +} + + +static struct ves1820_config alps_tdbe2_config = { + .demod_address = 0x09, + .xin = 57840000UL, + .invert = 1, + .selagc = VES1820_SELAGC_SIGNAMPERR, + .pll_set = alps_tdbe2_pll_set, +}; + +static u8 read_pwm(struct ttusb* ttusb) +{ + u8 b = 0xff; + u8 pwm; + struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, + { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; + + if ((i2c_transfer(&ttusb->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) + pwm = 0x48; + + return pwm; +} static void frontend_init(struct ttusb* ttusb) @@ -1394,6 +1436,12 @@ static void frontend_init(struct ttusb* ttusb) break; + case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) + ttusb->fe = ves1820_attach(&alps_tdbe2_config, &ttusb->i2c_adap, read_pwm(ttusb)); + if (ttusb->fe != NULL) + break; + break; + case 0x1005: // Hauppauge/TT Nova-USB-t budget (tda10046/Philips td1316(tda6651tt) OR cx22700/ALPS TDMB7(??)) // try the ALPS TDMB7 first ttusb->fe = cx22700_attach(&alps_tdmb7_config, &ttusb->i2c_adap); @@ -1570,7 +1618,7 @@ static void ttusb_disconnect(struct usb_interface *intf) static struct usb_device_id ttusb_table[] = { {USB_DEVICE(0xb48, 0x1003)}, -/* {USB_DEVICE(0xb48, 0x1004)},UNDEFINED HARDWARE - mail linuxtv.org list*/ /* to be confirmed ???? */ + {USB_DEVICE(0xb48, 0x1004)}, {USB_DEVICE(0xb48, 0x1005)}, {} }; @@ -1578,7 +1626,7 @@ static struct usb_device_id ttusb_table[] = { MODULE_DEVICE_TABLE(usb, ttusb_table); static struct usb_driver ttusb_driver = { - .name = "Technotrend/Hauppauge USB-Nova", + .name = "ttusb", .probe = ttusb_probe, .disconnect = ttusb_disconnect, .id_table = ttusb_table, diff --git a/drivers/media/dvb/ttusb-dec/ttusb_dec.c b/drivers/media/dvb/ttusb-dec/ttusb_dec.c index 505bdaff5a7e..45c9a9a08e4d 100644 --- a/drivers/media/dvb/ttusb-dec/ttusb_dec.c +++ b/drivers/media/dvb/ttusb-dec/ttusb_dec.c @@ -1281,6 +1281,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) if (firmware_size < 60) { printk("%s: firmware size too small for DSP code (%zu < 60).\n", __FUNCTION__, firmware_size); + release_firmware(fw_entry); return -1; } @@ -1294,6 +1295,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) printk("%s: crc32 check of DSP code failed (calculated " "0x%08x != 0x%08x in file), file invalid.\n", __FUNCTION__, crc32_csum, crc32_check); + release_firmware(fw_entry); return -1; } memcpy(idstring, &firmware[36], 20); @@ -1308,15 +1310,19 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) result = ttusb_dec_send_command(dec, 0x41, sizeof(b0), b0, NULL, NULL); - if (result) + if (result) { + release_firmware(fw_entry); return result; + } trans_count = 0; j = 0; b = kmalloc(ARM_PACKET_SIZE, GFP_KERNEL); - if (b == NULL) + if (b == NULL) { + release_firmware(fw_entry); return -ENOMEM; + } for (i = 0; i < firmware_size; i += COMMAND_PACKET_SIZE) { size = firmware_size - i; @@ -1345,6 +1351,7 @@ static int ttusb_dec_boot_dsp(struct ttusb_dec *dec) result = ttusb_dec_send_command(dec, 0x43, sizeof(b1), b1, NULL, NULL); + release_firmware(fw_entry); kfree(b); return result; diff --git a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c index 1699cc9f6bb0..725af3af5b27 100644 --- a/drivers/media/dvb/ttusb-dec/ttusbdecfe.c +++ b/drivers/media/dvb/ttusb-dec/ttusbdecfe.c @@ -157,7 +157,8 @@ struct dvb_frontend* ttusbdecfe_dvbt_attach(const struct ttusbdecfe_config* conf /* allocate memory for the internal state */ state = (struct ttusbdecfe_state*) kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL); - if (state == NULL) goto error; + if (state == NULL) + return NULL; /* setup the state */ state->config = config; @@ -167,10 +168,6 @@ struct dvb_frontend* ttusbdecfe_dvbt_attach(const struct ttusbdecfe_config* conf state->frontend.ops = &state->ops; state->frontend.demodulator_priv = state; return &state->frontend; - -error: - kfree(state); - return NULL; } static struct dvb_frontend_ops ttusbdecfe_dvbs_ops; @@ -181,7 +178,8 @@ struct dvb_frontend* ttusbdecfe_dvbs_attach(const struct ttusbdecfe_config* conf /* allocate memory for the internal state */ state = (struct ttusbdecfe_state*) kmalloc(sizeof(struct ttusbdecfe_state), GFP_KERNEL); - if (state == NULL) goto error; + if (state == NULL) + return NULL; /* setup the state */ state->config = config; @@ -193,10 +191,6 @@ struct dvb_frontend* ttusbdecfe_dvbs_attach(const struct ttusbdecfe_config* conf state->frontend.ops = &state->ops; state->frontend.demodulator_priv = state; return &state->frontend; - -error: - kfree(state); - return NULL; } static struct dvb_frontend_ops ttusbdecfe_dvbt_ops = { |